CERTIFICATE OF COMPLIANCE
|
|
- Morgan Miller
- 7 years ago
- Views:
Transcription
1 Certificate Number E Report Reference E Issue Date 2014-SEPTEMBER-09 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of COMPONENT - CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See Addendum. Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: Standard for Safety for Cable Assemblies and Fittings for Industrial Control and Signal Distribution, UL Standard for Special Use Attachment Plugs, Receptacles and Connectors, C22.2 No M1987. See the UL Online Certifications Directory at for additional information Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements. The UL Recognized Component Mark for the U.S. generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. The UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 2
2 Certificate Number E Report Reference E Issue Date 2014-SEPTEMBER-09 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. USR, CNR M8 Male Cable fitting, Cat. No. 79 followed by -5812, followed by any 3 digits (xxx) designating noncritical variations of cable length, followed by -08. USR, CNR M12 Male Cable fitting, Cat. No. 79 followed by or -5810, followed by any 3 digits (xxx) designating noncritical variations of cable length, followed by -08. Male-to-Male configurations are not covered due to accessibility of live parts. William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 2
3 Certificate Number E Report Reference E Issue Date 2015-MARCH-17 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of COMPONENT - CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See Addendum Page. Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 2238, Safety for Cable Assemblies and Fittings for Industrial Control and Signal Distribution. CAN/CSA C22.2 No M1987, Special Use Attachment Plugs, Receptacles, and Connectors. See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at Page 1 of 2
4 Certificate Number E Report Reference E Issue Date 2015-MARCH-17 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Component Series 820, Cat. Nos. as follows: Panel-Mounted Conductor Fittings, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Female Cable Fitting Straight, Cat.Nos , , , , , , , , , , , , , , , , , Male Cable Fitting Straight, Cat. Nos , , , , , , , , , , , , , , , , , Female Cable Fitting Right Angle, Cat Nos , , , , , , , , , , Male Cable Fitting Right Angle, Cat. Nos , , , , , , , , , , Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at Page 2 of 2
5 CYJV2.E Cable Assemblies and Fittings for Industrial Contro von :34 CYJV2.E Cable Assemblies and Fittings for Industrial Control and Signal Distribution - Component Page Bottom Cable Assemblies and Fittings for Industrial Control and Signal Distribution - Component See General Information for Cable Assemblies and Fittings for Industrial Control and Signal Distribution - Component FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM, GERMANY E Panel-mounted conductor fittings, Series 820, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Female cable fitting straight, Cat. Nos , , , , , , , , , , , , , , , , , Male cable fitting straight, Cat. Nos , , , , , , , , , , , , , , , , , Female cable fitting right angle, Cat. Nos , , , , , , , , , , Male cable fitting right angle, Cat. Nos , , , , , , , , , , Female cable fittings, Series 714, Cat. Nos , , Inlets, Series 714, Cat. Nos , Series 825, Cat. No Series 715, Cat. No Female cable fittings, Series 825, Cat. Nos , , , , Series 715, Cat. Nos , , , , , , , , , , , , , , , , , , , Series 713, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Male cable fittings, Series 825, Cat. Nos , , , , , Series 715, Cat. Nos , , , , , , , , , , , , , , , , , , , Series 713, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
6 CYJV2.E Cable Assemblies and Fittings for Industrial Contro von :34, , , , , , , , , , , , , , Outlet, Series 825, Cat. No Cable assemblies, Series 423. Female cable connector with cable clamp, shieldable, size: 4-6mm, 6-8mm. Female cable connector, short version size: 4-8 mm. Female cable connector with shielding ring, size: 4-6mm, 6-8mm, 8-10mm. Female angled connector, shieldable size: 4-6mm, 6-8mm. Female socket solder connector. Size : 2-24 pole. Male angled connector, shieldable size: 4-6mm, 6-8mm. Male cable connector with cable clamp, shieldable size: 4-6mm, 6-8mm. Male cable connector, short version size: 4-8 mm. Male cable connector with shielding ring, size: 4-6mm, 6-8mm, 8-10mm. Male socket solder connector. Size : 2-24 pole. Female socket, solder connector front fastened, size: 2-24 pole. Female socket, dip solder, front fastened, size: 2-24 pole. Male socket, solder connector front fastened, size: 2-24 pole. Male socket, dip solder, front fastened, size: 2-24 pole. Marking: Company name and catalog or series designation on device or carton. Last Updated on Questions? Print this page Terms of Use Page Top 2013 When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment database for additional information regarding this product's certification. The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2013 ".
7 CYJV8.E Cable Assemblies and Fittings for Industrial Contro von :35 CYJV8.E Cable Assemblies and Fittings for Industrial Control and Signal Distribution Certified for Canada - Component Page Bottom Cable Assemblies and Fittings for Industrial Control and Signal Distribution Certified for Canada - Component See General Information for Cable Assemblies and Fittings for Industrial Control and Signal Distribution Certified for Canada - Component FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM, GERMANY E Panel-mounted conductor fittings, Series 820, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Female cable fitting straight, Cat. Nos , , , , , , , , , , , , , , , , , Male cable fitting straight, Cat. Nos , , , , , , , , , , , , , , , , , Female cable fitting right angle, Cat. Nos , , , , , , , , , , Male cable fitting right angle, Cat. Nos , , , , , , , , , , Female cable fittings, Series 714, Cat. Nos , , Inlets, Series 714, Cat. Nos , Series 825, Cat. No Series 715, Cat. No Female cable fittings, Series 825, Cat. Nos , , , , Series 715, Cat. Nos , , , , , , , , , , , , , , , , , , , Series 713, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Male cable fittings, Series 825, Cat. Nos , , , , , Series 715, Cat. Nos , , , , , , , , , , , , , , , , , , , , Series 713, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
8 CYJV8.E Cable Assemblies and Fittings for Industrial Contro von :35, , , , , , , , , , , , , , Outlet, Series 825, Cat. No Cable assemblies, Series 423. Female cable connector with cable clamp, shieldable, size: 4-6mm, 6-8mm. Female cable connector, short version size: 4-8 mm. Female cable connector with shielding ring, size: 4-6mm, 6-8mm, 8-10mm. Female angled connector, shieldable size: 4-6mm, 6-8mm. Female socket solder connector. Size : 2-24 pole. Male angled connector, shieldable size: 4-6mm, 6-8mm. Male cable connector with cable clamp, shieldable size: 4-6mm, 6-8mm. Male cable connector, short version size: 4-8 mm. Male cable connector with shielding ring, size: 4-6mm, 6-8mm, 8-10mm. Male socket solder connector. Size : 2-24 pole. Female socket, solder connector front fastened, size: 2-24 pole. Female socket, dip solder, front fastened, size: 2-24 pole. Male socket, solder connector front fastened, size: 2-24 pole. Male socket, dip solder, front fastened, size: 2-24 pole. Marking: Company name and catalog designation and Recognized Component Mark for Canada on device or carton. Last Updated on Questions? Print this page Terms of Use Page Top 2013 When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment database for additional information regarding this product's certification. The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2013 ".
9 Certificate Number E Report Reference E Issue Date 2014-OCTOBER-25 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of COMPONENT - CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See addendum page for models Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 2238, Cable Assemblies and Fittings for Industrial Control and Signal Distribution C22.2 No M1987, Special Use Attachment Plugs, Receptacles and Connectors See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 2
10 Certificate Number E Report Reference E Issue Date 2014-OCTOBER-25 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Cable Assemblies, Series 423 as follows: Female cable connector with cable clamp, solder, shieldable, size: 4 6mm, 6-8mm. Female cable connector with cable clamp, screw clamp, size: 4 6mm, 6-8mm. Female cable connector with cable clamp, crimp, size: 4 6mm, 6-8mm. Female cable connector with cable clamp, crimp, short version size: 4-8mm. Female angled, crimp, size: 4 6mm, 6-8mm. Female cable connector, solder, short version size: 4-8 mm. Female cable connector with shielding ring, solder, size: 4-6mm, 6-8mm, 8-10mm. Female angled connector, solder, shieldable size: 4-6mm, 6-8mm. Female socket solder connector, size: 2-24 pole. Female socket crimp connector, size: 4-8 pole. Female socket crimp connector, front fastened, size: 4-8 pole. Female socket, solder connector front fastened, size: 2-24 pole. Female socket, dip solder, front fastened, size: 2-24 pole. Male angled connector, solder, shieldable size: 4-6mm, 6-8mm. Male cable connector with cable clamp, solder, shieldable size: 4-6mm, 6-8mm. Male cable connector with cable clamp, screw clamp, size: 4 6mm, 6-8mm. Male cable connector with cable clamp, crimp, size: 4 6mm, 6-8mm. Male cable connector with cable clamp, crimp, short version size: 4-8mm. Male angled, crimp, size: 4 6mm, 6-8mm. Male cable connector, solder, short version size: 4-8 mm. Male cable connector with shielding ring, solder, size: 4-6mm, 6-8mm, 8-10mm. Male socket solder connector, size: 2-24 pole. Male socket crimp connector, size: 4-8 pole. Male socket crimp connector, front fastened, size: 4-8 pole. Male socket, solder connector front fastened, size: 2-24 pole. Male socket, dip solder, front fastened, size: 2-24 pole. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 2
11 Certificate Number E Report Reference E Issue Date 2014-FEBRUARY-04 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM, GERMANY This is to certify that representative samples of COMPONENT - CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See Addendum Page Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 2238 and C22.2 No M Cable Assemblies and Fittings for Industrial Control and Signal Distribution See the UL Online Certifications Directory at for additional information Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements. The UL Recognized Component Mark for the U.S. generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. The UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 1
12 Certificate Number E Report Reference E Issue Date 2014-FEBRUARY-04 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Female Cable fittings, Series 825, Cat. Nos , , , , Series 715, Cat. Nos , , , , , , , , , , , , , , , , , , , Series 713, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Male Cable fitting, Series 825, Cat. Nos , , , , , Series 715, Cat. Nos , , , , , , , , , , , , , , , , , , , Series 713, Cat. Nos , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Outlet, Series 825, Cat. No Inlet, Series 825, Cat. No Series 715, Cat. No William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 2
13 Certificate Number E Report Reference E Issue Date 2013-MARCH-20 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of COMPONENT - CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See Addendum Page Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: See Addendum Page See the UL Online Certifications Directory at for additional information Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements. The UL Recognized Component Mark for the U.S. generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. The UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 2
14 Certificate Number E Report Reference E Issue Date 2013-MARCH-20 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Standards for Safety: UL 2238, Standard for Cable Assemblies and Fittings for Industrial Control and Signal Distribution. CSA C22.2 No M1987, Special Use Attachment Plugs, Receptacles and Connectors. Products Covered: Female Outlets; M8 PCB Series 718, Cat. Nos , , , , , and M12 PCB Series 763, 766, and 876, Cat. Nos , , , , , , , , , , , , , , , , , Male Inlets; M8 PCB Series 718, Cat. Nos and M12 PCB Series 763, 766, and 876, Cat. Nos , , , , , , , , , , , , , , , , , William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 2
15 Certificate Number E Report Reference E Issue Date 2014-DECEMBER-06 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG, ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of COMPONENT - CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See next page for Models Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 2238, The Standard for Safety for Cable Assemblies and Fittings for Industrial Control and Signal Distribution the Canadian Standard C22.2 No M1987 Update no. 4 See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 3
16 Certificate Number E Report Reference E Issue Date 2014-DECEMBER-06 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Female Cable fittings, Series 813, Cat. Nos , Series 814, Cat. Nos , Series Power 713, Cat. Nos , , , Male Cable fitting, Series 813, Cat. Nos , Series 814, Cat. Nos , Series Power 713, Cat. Nos , , , Outlet, Series 813, Cat. Nos , , , Series 814, Cat. Nos , Series Power 713, Cat. Nos , , , , Inlet, Series 813, Cat. Nos , , , Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 3
17 Certificate Number E Report Reference E Issue Date 2014-DECEMBER-06 Series 814, Cat. Nos , Series Power 713, Cat. Nos , , , , Male-to-Male configurations are not covered due to accessibility of live parts. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 3 of 3
18 Certificate Number E Report Reference E Issue Date 2014-APRIL-03 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of COMPONENT - CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION REFER TO ADDENDUM PAGE FOR MODELS Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 2238 STANDARD FOR CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See the UL Online Certifications Directory at for additional information Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 1
19 Certificate Number E Report Reference E Issue Date 2014-APRIL-03 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. USR Cable Assemblies, Cat. Nos and USR Panel Mount Fittings, Cat. Nos and William R. Carney, Director, North American Certification Programs Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 2
20 Certificate Number E Report Reference E Issue Date 2015-FEBRUARY-20 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See Addendum Page Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 2238 and C22.2 No M1987, Cable Assemblies and Fittings for Industrial Control and Signal Distribution See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 2
21 Certificate Number E Report Reference E Issue Date 2015-FEBRUARY-20 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Male Cable Fittings - Series 718, Cat. Nos. 77, followed by 3405, 3403, 3705 and 3703 followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8 followed by 00, 01, 03, 10, 12, 13 or 20 followed by 03, 04 or 06, followed by any four digits (XXXX). Female Cable Fittings - Series 718, Cat. Nos. 77, followed by 3406, 3408, 3608, 3208, 3706, 3708 and 3808 followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8 followed by 00, 01, 03, 10, 12, 13 or 20 followed by 03, 04 or 06, followed by any four digits (XXXX). Cable Assemblies - Series 718, Cat. Nos. 77, followed by 3405, 3403, 3406, 3408, 3608, 3208, 3705, 3703, 3706, 3708, or 3808, followed by 3405, 4303, 3406, 3408, 3608, 3208, 3705, 3703, 3706, 3708, or 3808, followed by 2, 3, 4, 5, 6, 7 or 8 followed by 00, 01, 03, 10, 12, 13 or 20 followed by 03, 04 or 06, followed by any four digits (XXXX). Male-to-Male configurations are not covered due to accessibility of live parts. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 2
22 Certificate Number E Report Reference E Issue Date 2015-FEBRUARY-20 Issued to: FRANZ BINDER GMBH & CO. ELEKTRISCHE BAUELEMENTE KG ROETELSTRASSE NECKARSULM GERMANY This is to certify that representative samples of CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION See Addendum Page Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 2238 and C22.2 No M1987, Cable Assemblies and Fittings for Industrial Control and Signal Distribution See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 1 of 3
23 Certificate Number E Report Reference E Issue Date 2015-FEBRUARY-20 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Male Cable Fittings, Series 763, Cat. Nos. 77 followed by 2527, 2529, 2827, 2829, 2927, 2929, 3227, 3229, 3327, 3329, 3427, 3429, 3527, 3529, 3627, 3629, 3727, 3729, 3827, 3829, 4627 or 4629, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8, followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 03, 04, 05, 08 or 12, followed by any four digits (XXXX). Male Cable Fittings, Series 766, Cat. Nos. 77 followed by 4227, 4229, 4327, 4329, 4427, 4429, 4927 or 4929, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8, followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 02, 03, 04 or 05, followed by any four digits (XXXX). Male Cable Fittings, Series 866, Cat. Nos. 77 followed by 4703, 4705, 4727,4729, 4827 or 4829, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8, followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 03, 04 or 05, followed by any four digits (XXXX). Male Cable Fittings, Series 876, Cat. Nos. 77 followed by 4527 or 4529, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8, followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 03, 04, 05 or 08 followed by any four digits (XXXX). Female Cable Fittings, Series 763, Cat. No. 77 followed by 2530, 2534, 2830, 2834, 2930, 2934, 3030, 3034, 3134, 3230, 3234, 3330, 3334, 3430, 3434, 3530, 3534, 3630, 3634, 3730, 3734, 3830, 3834, 3930, 3934, 4630, 4634 or 5134, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8 followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 03, 04, 05, 08 or 12, followed by any four digits (XXXX). Female Cable Fittings, Series 766, Cat. No. 77 followed by 4230, 4234, 4330, 4334, 4430, 4434, 4930 or 4934, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8 followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 02, 03, 04 or 05, followed by any four digits (XXXX). Female Cable Fittings, Series 866, Cat. No. 77 followed by 4706, 4708, 4730, 4734, 4830 or 4834, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8 followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 03, 04 or 05, followed by any four digits (XXXX). Female Cable Fittings, Series 876, Cat. No. 77 followed by 4530 or 4534, followed by 0000, followed by 2, 3, 4, 5, 6, 7 or 8 followed by 00, 01, 03, 07, 10, 11, 12, 13, 17, 18, 20, 21, 30 or 37, followed by 03, 04, 05 or 08, followed by any four digits (XXXX). Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Any information and documentation involving UL Mark services are provided on behalf of (UL) or any authorized licensee of UL. For questions, please Page 2 of 3
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
More informationCERTIFICATE OF COMPLIANCE Certificate Number 20130129-E348949 Report Reference E348949-20130125 Issue Date 2013-JANUARY-29 Issued to: GEORG SCHLEGEL GMBH & CO KG AM KAPELLENWEG 88525 DURMENTINGEN/WUERTT
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationWOYR2.E67774 - Switches, Appliance and Special Use - Component. Switches, Appliance and Special Use - Component
Page 1 of 24 02..2014 WOYR2.E67774 Switches, Appliance and Special Use - Component For enhanced search functionality, please visit UL's iq Family of Databases. Click on a product designation for complete
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationAMP/WALDOM MOLEX SOLDERLESS AMP/WALDOM
MOLEX SOLDERLESS Mate-N-Lok Connector Kits p Assortment Connector Kits p General Purpose Connector Kits p4-8 Universal Connector Kits p8-0 s p- limite Subminiature D Connector Kits p-4 Tools Used in Programs
More informationOperating Instructions
Operating Instructions Cable Glands Ex d and Ex e with Compound > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Information...3 4 Designated Use...4 5 Technical Data...4
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More informationTrident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationHARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationACTIVITE RACCORDEMENT 10 RUE AMPERE 69685 CHASSIEU CEDEX FRANCE TERMINAL BLOCKS
Certi fi c ate Number 20100702-E60645 Page 1 of 2 Report Referenc e E60645, 2010 July 02 Is s ue Date: 1996 July 09 Issued to: ABB FRANCE ACTIVITE RACCORDEMENT 10 RUE AMPERE 69685 CHASSIEU CEDEX FRANCE
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationCutMaster 82. 6.04 Major External Replacement Parts
CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080
More informationAssembly Instruction CAI- Connector with universal Endbell
CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More information01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
More informationCutMaster 102. 6.04 Major External Replacement Parts
CutMaster 0 6.04 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-086 Tube, roll handle 9-0 4 Front Panel 9-087 Rear Panel 9-00 4 Art #
More information1 Introduction - Advice... 2. 2 Conductor Rails... 3. 3 Track Coupler... 4. 4 Power feeds... 5. 5 Air Gap Insulation Section... 6
Contents 1 Introduction - Advice... 2 2 Conductor Rails... 3 3 Track Coupler... 4 4 Power feeds... 5 5 Air Gap Insulation Section... 6 6 Expansion joints... 7 7 Anchor Caps... 8 8 End Caps (Distance between
More informationBLACK BOX. T1/E1 Link Extenders OCTOBER 2007 MT195A-T1 MT196A-E1
BLACK BOX NETWORK SERVICES OCTOBER 2007 MT195A-T1 MT196A-E1 T1/E1 Link Extenders Important This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved
More informationInstruction / Installation Sheet DataComm Electronics 50-6623-WH-KIT Flat Panel TV Cable Organizer Kit with Duplex Power Solution
Instruction / Installation Sheet DataComm Electronics 50-6623-WH-KIT Flat Panel TV Cable Organizer Kit with Duplex Power Solution DataComm Electronics, Inc. 6349 Peachtree Street Norcross, GA 30071-1725
More informationRutenbeck Network Connection Box Cat. 5, shielded. Cable installation. UAE Connection Box Cat. 5 Operating Instructions.
Rutenbeck Network Connection Box Cat. 5, shielded 1-gang, 1 x 8-pole Order No.: 0180 00 2-gang, 2 x 8-pole Order No.: 0178 00 1-gang, (especially for channel construction) Order No.: 0802 00 2-gang, (especially
More informationHow To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
More informationEPIC CIRCON M23 Series Circular Signal Connectors
Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel
More informationUL Online Certifications Directory
UL Online Certifications Directory OCD Home Quick Guide Contact Us UL.com BXUV.D972 Fire Resistance Ratings - ANSI/UL 263 Page Bottom Fire Resistance Ratings - ANSI/UL 263 See General Information for Fire
More informationStandard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
More informationQuick Connect Boxes Inside Gloveboxes
ULC Series Junction Boxes Quick Connect Boxes Inside Gloveboxes The ULC quick connect junction boxes are the essential elements to optimize the cabling inside gloveboxes. Large range Designed for nuclear
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationgesis IP + Heavy Duty Class I, Zone 2
gesis IP + Heavy Duty gesis IP+ 20i HD Z2 Heavy-Duty Connectors for Class 1, Zone 2 Hazardous Locations Catalog 2012 Catch the Next Wave in Modular Connections Plug & Go Heavy-Duty Connectors for areas
More informationORIGINAL CABLE PLATES
Since 1998, DataComm Electronics has been pioneering innovative solutions for structured wiring. Industry-wide, we are known as the manufacturer who listens to customers, delivering the reliable and affordable
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
More informationT.V. & VIDEO CONNECTORS
T.V. & VIDEO CONNECTORS No.MTV-245LS MALE No.MTV-045LS FEMALE No.MTV-245FS MALE QUICK TERMINATE FULL SHILDED COAXIAL CONNECTORS 13 7 OPEN UP RECOMMENDED CABLE STRIPPING DIM'S PUSH THE CABLE!! SHUT DOWN
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2011-12-17 Page 1 of 19 Report Reference # E146893-V1-S24 Revised: 2013-03-21 UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES 60601-1:2005 (Medical electrical equipment Part 1: General
More informationPC 4/ 3-G-7,62. Extract from the online catalog. Order No.: 1804807
Extract from the online catalog PC 4/ 3-G-7,62 Order No.: 1804807 The figure shows a 5-pos. version of the product Header, Nominal current:, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of positions: 3,
More informationM8 / M12 CONNECTOR SYSTEM
M8 / M12 CONNECTOR SYSTEM EVERY CONNECTION COUNTS TE CONNECTIVITY S M8 / M12 Connector System for machine industrial automation and control applications provides a solution that safely and reliably ensures
More informationQuick Reference Guide Euro Style Terminal Blocks
Quick Reference Guide Euro Style terminal block connectors feature various wire termination methods including rising cage clamp, wire protector, spring, IDC and crimp snap. The design of terminal block
More informationELECTRICAL INSPECTION BULLETIN (Effective 2000-03-01)
ELECTRICAL INSPECTION BULLETIN (Effective 2000-03-01) Rule 28-900 Standby Generator Installations Due to the increasing number of standby generator installations being established to maintain continuity
More informationFigure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
More informationINNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
More informationIndustrial circular connectors
Industrial circular connectors M 16 M 58 010 CONINVERS - M16 to M58 circular connectors for industrial applications CONINVERS GmbH, an independent company, is the specialist for M16 to M58 circular connectors
More informationAccessories for Enabling Switches
BD Male plug SS Female connector C- Male flange connector SD Female connector BS Extension cable BD -pin + PE Dimension drawings Male plug SS -pin + PE Female connector C- -pin + PE BD for male plug SS
More informationPANEL CUT-OUT DIMENSIONS
POWER, Mains, IEC A comprehensive range of 3 pin IEC connectors with extensive international approval status designed for 'cold condition' applications (65 C). Rated 10A, 2Vac and to IEC320, EN60320 and
More information3x cinch/s-video socket Order no.: 33 1532 xx. USB/3.5 mm audio socket Order no.: 33 1539 xx. VGA socket Order no.: 33 1540 xx
3x cinch/s-video socket Order no.: 33 1532 xx USB/3.5 mm audio socket Order no.: 33 1539 xx VGA socket Order no.: 33 1540 xx VGA socket with screw-in lift terminals Order no.: 33 1541 xx High definition
More informationQuick Reference Guide 1.5 mm AMP Mini CT Connector Series
Quick Reference Guide 1.5 mm AMP Mini CT Connector Series The AMP Mini CT connectors are miniature wire-to-board and wire-to-wire connectors. Like the standard AMP CT connector series, these connectors
More informationCERTIFICATE OF COMPLIANCE
CERTIFICATE OF COMPLIANCE Certificate Number 20131115-E240353 Report Reference E240353-A17-UL Issue Date 2013-NOVEMBER-15 Issued to: HGST, A WESTERN DIGITAL COMPANY 5601 GREAT OAKS PKY SAN JOSE CA 95119
More informationUTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
More informationPin Connectors. Pin Connectors. Electrical Wiring Devices for the Entertainment Industry. Bulletin: PCL-13. Copyright 2013, Union Connector Co., Inc.
Pin Connectors Pin Connectors Electrical Wiring Devices for the Entertainment Industry Bulletin: PCL-13 Copyright 2013, Union Connector Co., Inc. 20-2P&G Plugs and Connectors 2P&G Panel Mount Devices Features
More informationA&C Solutions: please contact us.
FOR LIGHTING ABOUT SOLUTIONS DESIGNED AROUND YOUR BUSINESS A&C Solutions is a connector & harness distribution specialist that offers a tailor made solution to any application and delivers high quality
More information114-22008. 8-Position Cat5e (EMT) Modular Plug Connectors. Application Specification
Application Specification 114-22008 02/May/2008 Rev H 8-Position Cat5e (EMT) Modular Plug Connectors NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
More informationElectrical connection technologies Electrical connectors Electrical connectors with cable, series. Brochure
Electrical connection technologies Electrical connectors Electrical connectors with cable, series CN Brochure Electrical connection technologies Electrical connectors Electrical connectors with cable,
More informationMultilevel Socket Technologies
Multilevel Socket Technologies High Performance IC Sockets And Test Adapters Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs & Turn-Key Solutions
More informationTrapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
More informationANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
More informationDo s and don'ts of connection systems Are there any options when the clearance and creepage distances are not sufficient for UL 1059?
Do s and don'ts of connection systems Are there any options when the clearance and creepage distances are not sufficient for UL 1059? Speaker: Wolfgang Sichmann, Product Manager PCB Plug-In Connectors,
More informationPS 155 WIRELESS INTERCOM USER MANUAL
PS 155 INTERFACE TO SIMPLEX WIRELESS INTERCOM USER MANUAL Issue 2011 ASL Intercom BV DESIGNED AND MANUFACTURED BY: ASL INTERCOM BV ZONNEBAAN 42 3542 EG UTRECHT THE NETHERLANDS PHONE: +31 (0)30 2411901
More informationBXUV.D946 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263
BXUV.D946 Fire Resistance Ratings - ANSI/UL 263 Page Bottom Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements
More informationCabling Specifications
APPENDIX A This appendix provides cabling and pinout information for feature cards on the Cisco AS5350XM and Cisco AS5400XM universal gateways. It contains the following sections: 2-Port and 4-Port T1
More informationDVI DA2 and DVI DA 4 User Guide
DVI DA2 and DVI DA 4 User Guide This guide describes the installation and operation of the Extron DVI DA2 and DVI DA4 Distribution Amplifiers. Unless stated otherwise, distribution amplifier or the unit
More informationODU MINI-SNAP. Miniature Cylindrical Connectors with Push-Pull-Locking Series F
Catalogue Nr.: 5--a-e ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße, D-85 Mühldorf/Inn Telefon: +9/86 /6 56-, Telefax:
More information2.54 mm Power Taps for Backplanes
www.erni.com Catalog E 074490 04/06 Edition 2 www.erni.com 2 Catalog E 074490 Catalog 04/06 E 074490 04/06 Edition 2 Edition www.erni.com 2 Table of Contents Electrical and Mechanical Characteristics...2
More informationZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket
Technical Datasheet SNK64D00 Catalogue Page SNK64S00 ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket - Ease your test operations with the built-in test sockets, - Screwdriver
More informationJack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
More informationContents. Safety Warnings... 1
Contents Safety Warnings... 1 Unpacking the GQ600... 1 Introduction... 2 GQ600 Filter Characteristics... 2 1/3 Octave Centre Frequencies... 4 Front Panel Functions... 5 Rear Panel Functions... 6 Specifications...
More informationAnderson Power Products
Anderson Power Products Anderson Power Products APP s philosophy is to provide products and services within the trading markets of our customers. We currently serve our world-wide customer base from customer
More informationSunny Boy Accessories SMA POWER BALANCER
Sunny Boy Accessories SMA POWER BALANCER Installation Guide SBUS-PowBal-IUS102810 IMUS-SBUS-PBL Version 1.0 US SMA America, LLC Legal Restrictions Copyright 2010 SMA America, LLC. All rights reserved.
More informationHigh PoE Midspans NPD-6001A NPD-9501A. en Installation Manual
High PoE Midspans NPD-6001A NPD-9501A en Installation Manual High PoE Midspans Table of Contents en 3 Table of contents 1 Safety 4 1.1 About this Manual 4 1.2 Legal Information 4 1.3 Safety Precautions
More information1. Features 3. 2. Package content 4. 3. The case at a glance 5. 4. Installation notes 7. 5. Removing the left HDD mounting plate 8
Manual Content 1. Features 3 2. Package content 4 3. The case at a glance 5 4. Installation notes 7 5. Removing the left HDD mounting plate 8 6. Installation of a mainboard 9 7. Installation of a PSU 11
More informationZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied
More informationBNC, N, TNC Connectors
BNC, N, TNC Connectors ONLINE CATALOG AEP BNC, N, and TNC series connectors are specifically designed for use with miniature flexible and semi-rigid cable. They are available with goldplated or nickel-plated
More informationTest Report. Date of test: 2004-08-09. OBO Bettermann GmbH & Co. Test requirements: Electrical continuity of the EN 61537
Test Report Report no.: Test engineer: Customer: Device under test: Dipl.-Ing. M.Benzin OBO Bettermann GmbH & Co. Cable trays MKS and RKS Test requirements: Electrical continuity of the EN 61537 Test engineer:
More informationProduct Information. HMC 6 Hybrid Motor Cable
Product Information HMC 6 Hybrid Motor Cable November 2014 HMC 6 Single-cable solution for servo drives Motors normally need two separate cables: One cable for the motor encoder One cable for the motor
More informationConnectors. product overview. Edition 3
Connectors product overview Edition 3 Editorial Good connections bear a name: ept Thomas Bernhard Claus Guglhör Guglhör Guglhör ept designs, produces and distributes electronic connectors for highquality
More informationTS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING
TORONTO TRANSPORTATION January 2012 TS 813 GROUNDING AND BONDING TABLE OF CONTENTS 1. DRAWINGS TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET
More informationUSB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
More informationQM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
More informationWaterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
More informationInstallation Guide for Artic Air 24 Volt R134A Air Conditioner
Installation Guide for Artic Air 24 Volt R134A Air Conditioner Rev 004 April 20, 2014 There are five objectives to installing the Artic Air unit: 1) The primary wiring from the battery, 2) The controller
More informationOutside Plant Precision Cooling Site Monitoring and Services
Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity
More informationTechnology this. specialized can t meet all. requirements. Yes it can. The Pluggable Connection System
Technology this specialized can t meet all requirements. Yes it can. The Pluggable Connection System , the pluggable connection system that is unlike anything you ve ever seen before. Traditional Design
More informationPAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
More informationQuick Reference Guide 1.5 mm AMP Mini CT Connector Series
Quick Reference Guide The AMP Mini CT connectors are miniature wire-to-board and wire-to-wire connectors. Like the standard AMP CT connector series, these connectors are tailored for improved harness productivity
More informationSMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
More informationTorque Transducers MEASURING ELECTRONIC
Screwdriving technology Automation Air motors Air tools MEASURING ELECTRONIC Torque Transducers In most situations, the essential element of screwdriving technology is torque. Controlling the torque generated
More informationCIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
More informationPower Supply Guide Version 1.0 for D-Show
Power Supply Guide Version 1.0 for D-Show Digidesign 2001 Junipero Serra Boulevard Daly City, CA 94014-3886 USA tel: 650 731 6300 fax: 650 731 6399 Technical Support (USA) tel: 650 731 6100 fax: 650 731
More informationHARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationMaterial and Components Used for UL/C-UL/ULC Mark Follow-Up Services
MARK INTEGRITY PROGRAM UL Traceability Requirements Material and Components Used for UL/C-UL/ULC Mark Follow-Up Services UL defines minimum requirements for material and components used in UL certified
More informationVARIOSUB RJ45/IP20 Plug Connectors
VARIOSUB RJ4/IP0 Plug Connectors VARIOSUB-RJ4/IP0 was developed for using RJ4 plug connectors in harsh industrial environments. With it, devices for Industrial Ethernet can also utilize the standard plug
More informationMCD 1,5/ 4-G1-3,81. Extract from the online catalog. Order No.: 1843091
Extract from the online catalog MCD 1,5/ 4-G1-3,81 Order No.: 1843091 The figure shows a 10-position version of the product Header, Nominal current:, Nom. voltage: 160 V, Pitch: 3.81 mm, Number of positions:
More informationCustom white plates with engraving. Custom metal plates with engraving
We have designed over 3,000 plates and manufactured over 12,000 plates here in York. For the best selection of AV Plates in the UK contact us 01904 693969 or sales@ydl.co.uk. Custom white plates with engraving
More informationUSER MANUAL. MODEL 460 Series G.703 Coax to Twisted Pair Adapter (Balun)
USER MANUAL MODEL 460 Series G.703 Coax to Twisted Pair Adapter (Balun) An ISO-9001 Certified Company Part #07M460-E Doc. #019021UE Revised 02/23/00 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301)
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More informationIMMS-CCC. IMMS-CCC Hardwire Central Interface. Installation Instructions
IMMS-CCC IMMS-CCC Hardwire Central Interface Installation Instructions TABLE OF CONTENTS... Choose a Location... 1 Connections... 2 Operations... 3 Software Configuration... 4 Troubleshooting... 5 Loopback
More information