Installing a Star USB Printer on Mac OS X Using CUPS

Transcription

1 Introduction Application Note Installing a Star USB Printer on Mac OS X Using CUPS This application note shows how to install a Star USB printer using the Star CUPS Driver. While this document was written using a TSP700II, the directions apply to all models listed below. Supported Printers: TSP100ECO, TSP100U, TSP100GT, TSP650, FVP10, TSP700II, TSP800II, SP700, HSP7000, TUP500, TUP900 Supported Interfaces: USB Supported Environments: Mac OS X 10.8 Mountain Lion, 10.7 Lion, 10.6 Snow Leopard, 10.5 Leopard Star Tools Needed: CUPS Driver from the Star Micronics Global Support Site Table of Contents I. Mountain Lion Prerequisites. Page 1 II. Installing the CUPS Driver... Page 4 III. Installing the Printer Page 7 IV. Printing a Test Page and Configuring CUPS Settings.. Page 10 V. Rectifying Print Delay Page 13 I. Mountain Lion Prerequisites Lion, Snow Leopard, and Leopard users should skip to Section II: Installing the CUPS Driver. The Mountain Lion update features a change in security settings on Mac OS X. This section covers the steps necessary to adjust permission settings to install the Star Micronics CUPS driver on this operating system. When attempting to install the CUPS driver prior to setting the correct permission, the above error message displays. 09/2012, V1.1 Page 1

2 1. Click the Apple and then System Preferences. 2. Click Security and Privacy. 09/2012, V1.1 Page 2

3 3. Set Allow applications downloaded from: to Anywhere. 4. Click Allow From Anywhere. Note: After the driver installation completes, it is strongly recommended to restore this setting to either Mac App Store or Mac App Store and identified developers. Mountain Lion is now ready to install the CUPS driver. Continue to Section II: Installing the CUPS Driver. 09/2012, V1.1 Page 3

4 II. Installing the CUPS Driver 1. Ensure the CUPS driver is on the Mac. Most Star printers ship with Installation CDs containing all drivers. If the printer did not ship with a CD or the CD was misplaced, the driver can be downloaded for free from the Star Global Support Site. 2. Open starcupsdrv-#.#.#.pkg. 3. Click Continue. 09/2012, V1.1 Page 4

5 4. Select the location to install and click Continue. 5. Click Install and enter the system username and password if prompted. 09/2012, V1.1 Page 5

6 6. Click Close. 09/2012, V1.1 Page 6

7 III. Installing the Printer 1. Ensure the printer is connected to the Mac and powered on. 2. Click the Apple and then System Preferences. 3. Click Print & Scan. 09/2012, V1.1 Page 7

8 4. Click +. 5a. Depending on OS version, the printer is automatically added or must be chosen from a list. In the above screen shot from 10.7 Lion, the printer was automatically added. 09/2012, V1.1 Page 8

9 5b. If the printer is not automatically added, find the model in the list and click Add. It will then appear in the Print & Fax default window. Congratulations! You have successfully installed your Star USB Printer on Mac OS X. Continue on to Section IV to learn how to print a self test and configure settings available in CUPS. 09/2012, V1.1 Page 9

10 IV. Printing a Test Page and Configuring CUPS Settings 1. Open a browser like Safari or Firefox and type localhost:631 in the address bar. 2. Mountain Lion users may experience the above error message. If this occurs, copy cupsctl WebInterface=yes. 3. Open Terminal. 4. Paste the command and hit enter. 09/2012, V1.1 Page 10

11 5. Return to the browser and retype localhost:631. The CUPS settings will now be available. 6. Click Printers. 7. Click the blue printer queue name. 09/2012, V1.1 Page 11

12 8. In the Maintenance dropdown, choose Print Test Page. The printer prints a test page from CUPS. 9. In the Administration dropdown, choose Set Default Options. 10. Click on any option in blue to configure printer settings. Congratulations! You have successfully installed your Star USB Printer on Mac OS X and configured it through CUPS. 09/2012, V1.1 Page 12

13 V. Rectifying Print Delay In some situations, the TSP700II and TSP650 may experience a delay in printing. This section covers how to apply the fix by disabling Raster Printing. 1. Ensure the printer has been installed as described in Section II and Section III of this document. 2. Ensure the printer is set as the default. 3. Open the CUPS driver folder and navigate Tips > MSW_Setting 4. Copy mac.dat to the desktop. 5. Open Terminal. Type cd desktop 6. Type lpr o raw mac.dat The printer will reset and print a self test confirming Raster Printing has been successfully set to disable. The print delay issue will no longer be present. 09/2012, V1.1 Page 13

14 Star Micronics Worldwide Star Micronics is a global leader in the manufacturing of small printers. We apply over 50 years of knowhow and innovation to provide elite printing solutions that are rich in stellar reliability and industry-respected features. Offering a diverse line of Thermal, Hybrid, Mobile, Kiosk and Impact Dot Matrix printers, we are obsessed with exceeding the demands of our valued customers every day. We have a long history of implementations into Retail, Point of Sale, Hospitality, Restaurants and Kitchens, Kiosks and Digital Signage, Gaming and Lottery, ATMs, Ticketing, Labeling, Salons and Spas, Banking and Credit Unions, Medical, Law Enforcement, Payment Processing, and more! High Quality POS Receipts, Interactive Coupons with Triggers, Logo Printing for Branding, Advanced Drivers for Windows, Mac and Linux, Complete SDK Packages, Android, ios, Blackberry Printing Support, OPOS, JavaPOS, POS for.net, Eco-Friendly Paper and Power Savings with Reporting Utility, ENERGY STAR, MSR Reading, futureprnt, StarPRNT How can Star help you fulfill the needs of your application? Don t just settle on hardware that won t work as hard as you do. Demand everything from your printer. Demand a Star! Star Micronics Co., Ltd. 536 Nanatsushinya Shimizu-ku, Shizuoka Japan Star Micronics America, Inc King Georges Post Road Edison, NJ USA Star Micronics EMEA Star House Peregrine Business Park, Gomm Road High Wycombe, Buckinghamshire HP13 7DL UK +44-(0) Star Micronics Southeast Asia Co., Ltd. Room 2902C. 29th Fl. United Center Bldg. 323 Silom Road, Silom Bangrak, Bangkok Thailand x 2