Desoldering Stations. 112 Desoldering Stations

Transcription

1 112 Desoldering Stations

2 WR 3M Desoldering and Rework on highest level 3 independent tool channels with automatic tool detection guarantee the simultaneous operation of 3 soldering tools. Precise temperature control performance at the soldering tip is guaranteed by the digital control electrotechnology together with superior-quality sensor and heat-transfer technology. High-speed measured-value acquisition provides for maximum temperature precision and optimum dynamic temperature performance in load situations. High-Speed Micro Tools All Weller High-Speed Micro Tools such as the WMRP micro soldering pencil and the WMRT micro desoldering tweezers can be connected. But also extremely powerful bits, such as the new HAP 200 hot-air pencil, can be easily connected. USB port The WR 3M is equipped with a mini USB port. The extensive PC software supplied can be used to update the software on the control unit. Monitor software for monitoring, parameterising and data logging is included in the software package. Operation simplicity The big LC Display allows clear information and simple handling. Innovative special functions such as automatic channel changing, tem - perature preselection buttons for each channel, Factory Calibration Check. Desoldering Stations 113

3 Hot air nozzles: see page Soldering tips: see page 87 / 88 Desoldering nozzles: see page WR 3000M Desoldering station with multi-digital 420 W, 230 V with soldering iron DSX 80 and internal pump 3 tool channels with automatic tool detection Hot air iron, soldering iron and desoldering iron Own vacuum channel for pick up USB-port Comprehensive PC software All high-speed micro tools can be connected Dimensions L x W x H (mm): 237 x 235 x 102 Weight approx. 6,5 kg Safety class I and III, housing antistatic Fuse: overcurrent release 2 A (4 A) Temperature control of channels: soldering and desoldering irons stepless 50 C 550 C (150 F 999 F) Temperature accuracy: ± 9 C (± 17 F) Temperature stability: ± 5 C (± 9 F) Pump (periodic duty (30/30) s): max. vacuum 0,7 bar max delivery rate 18 l/min, hot air max. 15 l/min Equipotential bonding: via 3,5 mm pawl socket on back of device Housing antistatic Big LC Display Atomatic tool recognitation WR 3M Power unit 230 V HAP 200 Hot air iron 200 W / 24 V WDH 30 2 x Safety rest for DSX 80 and HAP DSX 80 Desoldering iron 80 W, 24 V with desoldering nozzle DX 113HM WP 80 Soldering iron 80 W with soldering tip LT B WDH 10T Safety rest with Stop+Go function for WP WVP Vacuum pick up USB cable and software Accessories: Adaptor for footswitch Food switch 1-step 114 Desoldering Stations

4 WR 3000M Same as model WR 3000M (left side) but with desoldering iron DXV 80 Hot air nozzles: see page Soldering tips: see page 87 / 88 Desoldering nozzles: see page WR 3M Power unit 230 V HAP 200 Hot air iron 200 W / 24 V WDH 30 Safety rest for HAP WDH 40 Safety rest for DXV DXV 80 Inline desoldering iron 80 W, 24 V WP 80 Soldering iron 80 W with soldering tip LT B WDH 10T Safety rest with Stop+Go function for WP WVP Vacuum pick up USB cable and software Accessories: Adaptor for footswitch Food switch 1-step Desoldering Stations 115

5 Soldering tips: see page 87 / 88 Hot air nozzles: see page WR 2002 Desoldering station multi-digital, 300 W with soldering iron WP 80 and desoldering iron DSX 80 2 independent tool channels with automatic tool detection for simultaneous operation of 2 soldering tools. All soldering tools, such as soldering irons, solder baths up to 200 W, desoldering irons up to 80 W or hot air irons up to 100 W can be connected. Weller micro tools cannot be operated on the WR 2 station. Internal rotary vane vacuum pump to produce vacuum and air flow. ECO button Freely programmable button for repetitive functions ESD safe Dimensions: L x B x H (mm): 273 x 235 x 102 Mains voltage:230 V, 50 Hz Protection class: I and III Temperature control: 50 C C Soldering iron WP 80 / WP 120 / WP 200: 50 C C Soldering iron WSP 150: 50 C C Soldering iron WP 200: 50 C C Desoldering iron DSX 80 / DSXV 80: 50 C C Hot air iron HAP 1: 50 C C Pump (periodic duty (30/30) s): max. vacuum 0.7 bar Max delivery rate 18 l/min Hot air max. 10 l/min WR 2 Repair station WP 80 Soldering iron 80 W with soldering tip LTB WDH 10T Safety rest with Stop + Go function DSX 80 Desoldering iron 80 W / 24 V with desoldering nozzle DX 113HM WDH 30 Safety rest Power cable Equipotential bonding connector 116 Desoldering Stations

6 Nozzles: see page WR 2000A Desoldering station multi-digital, 300 W with hot air iron HAP 1 2 independent tool channels with automatic tool detection for simultaneous operation of 2 soldering tools. All soldering tools, such as soldering irons, solder baths up to 200 W, desoldering irons up to 80 W or hot air irons up to 100 W can be connected. Weller micro tools cannot be operated on the WR 2 station. Internal rotary vane vacuum pump to produce vacuum and air flow. ECO button Freely programmable button for repetitive functions ESD safe Dimensions: L x B x H (mm): 273 x 235 x 102 Mains voltage: 230 V, 50 Hz Protection class: I and III Temperature control: 50 C C Soldering iron WP 80 / WP 120: 50 C C Soldering iron WP 150: 50 C C Soldering iron WP 200: 50 C C Desoldering iron DSX 80 / DSXV 80: 50 C C Hot air iron HAP 1: 50 C C Pump (periodic duty 30/30) s): max. vacuum 0.7 bar max delivery rate 18 l/min hot air max. 10 l/min WR 2 Repair station HAP 1 Hot air iron 100 W / 24 V with hot air nozzle R 06 round ø 3.0 mm WDH 30 Safety rest Power cable Equipotential bonding connector Desoldering Stations 117

7 Nozzles: see page WDD 81V Desoldering station digital 95 W, 230 V, compressed air or inert gas operated 1 channel Digitally controlled electronic for soldering or desoldering tools up to 80W Compressed air converter provides vacuum for the desoldering iron Inlet pressure KPA (58 87 psi) oil-free, dry compressed air or inert gas Temperature range 50 C 450 C Calibration box WCB 2 (see page 174) may be connected for CALIBRATION, LOCK OUT or OFFSET function Protection class 1 Antistatic housing Equipotential bonding (normal state hard grounded) Automatic tool recognition Dimensions: 166 x 115 x 101 mm (L x W x H) For use with external compressed air PUD 81V Power unit 230 V DSX 80 Desoldering iron 80 W, 24 V with nozzle DX 113HM AK 20 Safety rest DX 112 Nozzle DX 113 Nozzle Cleaning set Accessories: Adapter for foot switch Foot switch 1-step Filter WDD 118 Desoldering Stations

8 Soldering Tips: see page 87 / 88 Nozzles: see page WDD 161V Desoldering station digital 165 W, 230 V, compressed air or inert gas operated 2 channels Digitally controlled electronic for soldering or desoldering tools up to 150W Compressed air converter provides vacuum for the desoldering iron Inlet pressure KPA (58 87 psi) oil-free, dry compressed air or inert gas Temperature range 50 C 450 C (550 C with WSP 150) Calibration box WCB 2 (see page 174) may be connected for CALIBRATION, LOCK OUT or OFFSET function Protection class 1 Antistatic housing Equipotential bonding (normal state hard grounded) Automatic tool recognition Dimensions: 166 x 115 x 101 mm (L x W x H) For use with external compressed air PUD 161V Power unit 230 V DSX 80 Desoldering iron 80 W, 24 V with nozzle DX 113HM WSP 80 Soldering iron 80 W, 24 V with soldering tip LT B AK 20 Safety rest WPH 80 Safety rest DX 112 Nozzle DX 113 Nozzle Cleaning set Accessories: Adapter for foot switch Foot switch 1-step Filter WDD Desoldering Stations 119