RT230 RT 230. Rough Terrain Crane Datasheet imperial. Features: Rated capacity: ft working radius. Maximum boom length: 94 ft
|
|
|
- Arleen Kennedy
- 9 years ago
- Views:
Transcription
1 RT 230 Rough Terrain Crane Datasheet imperial Features: Rated capacity: ft working radius Maximum boom length: 94 ft Maximum tip height: 140 ft
2 CONTENTS Key Page: Dimensions Crane dimensions Crane weights Load Charts Range Diagram Main Boom Outriggers fully extended (100%) Load Chart Main Boom Outriggers fully extended (100%) Range Diagram Main Boom Outriggers fully retracted (0%) Load Chart Main Boom Outriggers fully retracted (0%) Range Diagram Main Boom 26 ft offsettable jib Load Chart Main Boom 26 ft offsettable jib Range Diagram Main Boom 43 ft offsettable jib Load Chart Main Boom 43 ft offsettable jib Range Diagram Main Boom On tires Load Chart Main Boom On tires Technical Description Boom Hoist, rope and hook , 17 Superstructure Cab, controls, operator aids and load limiter / load indicator , 18 Carrier, engine, drive-line and hydraulic system , 19 Vehicle performance Tires
3 KEY 3 RT 230 Counterweight General performance Main boom Telescoping mode Boom length Boom luffing angle Tip height Working radius Boom with extension Max. boom length with extension Main boom with aux head Distance from the hook to the head sheave pin Slewing / Allowable slewing range Slewing locked / Slewing locked at specified position Slewing brake Slewing gears Outriggers / Lifting on outriggers (100/ 50 / 0 % extended) Lifting on wheels / Pick & Carry Main hoist Auxiliary hoist Hoist speed Rope length Rope Standard / Optional Max. line pull Rope diameter Tire Hook block Controls Cab Engine Operator aids / Load limiter / Load indicator Steering Mechanical transmission Speed Hydraulics Heating / Air conditioning Working temperature Gradeability Lights Gross vehicle weight Crane / Crane in standard configuration Weight on front axle Crane without counterweight Weight on rear axle
4 CRANE DIMENSIONS Tire Variances x x 25 A (Approach Angle) Note: All heights are based on 20.5 x 25 tires. B (Departure Angle) C (Tire Track) 6'-7.5" 6'-10.5" D (Overall Width) 8' 8'-8" Outrigger Spread From Jack CL to Jack CL Fully Extended 19' Mid-Position Fully Retracted 13'-2" 7'-4.5" 4
5 CRANE WEIGHTS Approximate Weights 55,930 lb 28,972 lb 26,958 lb Add / Subtract for main optional equipment 26 ft to 43 ft swing on jib stowed lb lb 1100 lb Auxiliary boom head lb lb 200 lb Auxiliary hoist* lb 25 lb lb 4 sheaves, 30T lb lb 416 lb 3 sheaves, 30T lb lb 429 lb 2 sheaves, 25T lb lb 435 lb 7T Hookball lb lb 50 lb NOTE: Values are subject to 2% variation * Weight includes rope 5
6 RANGE DIAGRAM MAIN BOOM Outriggers Fully Extended (100 %) with hook block: 4 ft 5 in 6
7 LOAD CHART MAIN BOOM Outriggers Fully Extended (100 %) 10,000 lbs 19 ft (100%) 360 Standard ASME B30.5 Boom Length ft 39 ft 50 ft 61 ft 72 ft 83 ft 94 ft ft lbs lbs lbs lbs lbs lbs lbs ft 10 60,000 46, ,000 46,500 44, ,000 39,900 38,400 35, ,000 29,900 29,900 29,400 27, ,700 23,500 23,900 23,900 23,000 18,900 15, ,500 19,000 19,300 19,500 15,800 13, ,000 12,000 15,400 13,700 11, ,700 9,700 12,200 11,900 9, ,200 7,800 9,800 9,900 8, ,400 8,000 8,200 7, ,700 6,800 6, ,500 5,700 5, ,500 4,700 4, ,000 4, ,300 3, , , Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 7
8 RANGE DIAGRAM MAIN BOOM Outriggers Fully Retracted (0 %) with hook block: 4 ft 5 in 8
9 LOAD CHART MAIN BOOM Outriggers Fully Retracted (0 %) 10,000 lbs 7 ft 4.5 in (0%) 360 Standard ASME B30.5 Boom Length ft 39 ft 50 ft 61 ft 72 ft 83 ft 94 ft ft lbs lbs lbs lbs lbs lbs lbs ft 10 32,700 33, ,500 24,100 24, ,700 16,400 16,800 17, ,000 9,700 10,200 10,400 10, ,200 6,100 6,600 6,800 7,000 7,100 7, ,800 4,300 4,600 4,800 4,900 5, ,800 3,100 3,300 3,400 3, ,600 2,000 2,200 2,300 2, ,100 1,300 1,400 1, Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 9
10 RANGE DIAGRAM MAIN BOOM With Jib, 26 ft offset with hook block: 4 ft 5 in 10
11 LOAD CHART MAIN BOOM With Jib, 26 ft offset 10,000 lbs 19 ft (100%) 360 Standard ASME B ft Offsettable Jib ft lbs ft lbs ft lbs 35 9, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 11
12 RANGE DIAGRAM MAIN BOOM With Jib, 43 ft offset with hook block: 4 ft 5 in 12
13 LOAD CHART MAIN BOOM With Jib, 43 ft offset 10,000 lbs 19 ft (100%) 360 Standard ASME B ft Offsettable Jib ft lbs ft lbs ft lbs 41 5, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 13
14 RANGE DIAGRAM MAIN BOOM On Tires with hook block: 4 ft 5 in 14
15 LOAD CHART MAIN BOOM On Tires 10,000 lbs On tires x PR Standard ASME B30.5 Boom Stationary 360 Travel Speed Boom straight over front Radius Length 0 mph Creep 2.5 mph ft ft lbs lbs lbs ,900 34,600 23, ,900 29,800 20, ,000 24,300 16, ,300 16,500 11, ,300 11,100 8, ,300 8,000 6, ,900 6,000 4, ,200 4,800 3, ,800 3, ,700 2, ,000 1, ,400 1, , Notes to lifting capacity Lifting capacities do not exceed 85% of tipping load. Weight of hook blocks and slings is part of the load, and is to be deducted from the capacity ratings. Consult operation manual for further details. Note: Data published herein is intended as a guide only and shall not be construed to warrant applicability for lifting purposes. Crane operation is subject to the computer charts and operation manual both supplied with the crane. 15
16 TECHNICAL DESCRIPTION Boom 4 sections hydraulic actuated boom Standard configuration: Full power mechanically synchronized Min. / Max. 30 ft / 94 ft Boom elevation angle range (min. / max.) -4 / 76 Single sheave Optional configuration: One section, side stowable Angular offsets 0, 15 and 30 degrees With one section jib With two section jib 120 ft 147 ft Hoist, Rope and Hook Grooved drum Storage capacity Standard configuration: 598 ft Two speed ratios Without load in 6 th layer (low range / high range) Without load in 1 st layer (low range / high range) 297 ft/min / 475 ft/min 205 ft/min / 329 ft/min 6 x 19 IWRC XIPS, right regular lay, preformed 5/8 in 479 ft Max. line pull; 1 st layer low-range Max. line pull permissible 35,800 lbs 9,000 lbs 16
17 TECHNICAL DESCRIPTION Optional configuration: Hook and ball 7 ton 2 sheaves 25 ton 3 sheaves 30 ton 4 sheaves 30 ton Grooved drum Storage capacity 598 ft Without load in 6 th layer (low range / high range) Without load in 1 st layer (low range / high range) 205 ft/min / 329 ft/min 297 ft/min / 475 ft/min Rotation resistant compacted strand 18 x 19 or 19 x 19 5/8 in 479 ft Minimum breaking strength Max. line pull permissible 35,800 lbs 9,000 lbs Superstructure Standard configuration: Non stop 360º Maximum rotation speed without load 3 rpm Hydraulic motor Planetary reducer Foot actuated pedal provides variable braking force Travel Lock 360 house lock Cab, Controls, Operator aids and Load limiter / Load indicator Sliding door Tinted safety glass throughout Six way adjustable seat Standard configuration: Armrest mounted dual axis electro-proportional joysticks Steering wheel column with gear selector on the left and directional light selector on the right Dashboard mounted switches for outrigger operation Graphic interface for load indicator 17
18 TECHNICAL DESCRIPTION Heater Air conditioner Work lights Rotating beacon Optional configuration: Carrier, Engine, Drive-line and Hydraulic system Standard configuration: Hydraulic, independent extension: Diameter of outrigger pads 24 in Area of outrigger pads 254 in 2 Tier 4i Cummins QSB4.5 4 cylinders Rated power Maximum gross torque Intake: turbocharger with intercooler Fuel type Fuel tank capacity Tier 3 Cummins QSB4.5 4 cylinders Rated power Maximum gross torque Intake: turbocharger with intercooler Fuel type Fuel tank capacity 130 2,200 rpm 457 ft 1,500 rpm Ultra Low Sulfur Diesel (ULSD, max 15 ppm) 50 gallons 130 2,200 rpm 457 ft 1,500 rpm Diesel 50 gallons 6 x 6 powershift transmission with integral torque converter Full time 4WD (Four-Wheel Drive) Rigid mounted front axle Oscillating rear axle Differential lock on front axle and rear axle Rear axle oscillation lock manual or automatic actuation Air-over-hydraulic disc brakes Parking brake on front axle Hydraulic oil cooler on carrier Hydraulic power steering Front wheel steering Four wheel steering concentric Four wheel steering crab Optional rear wheel steering package 18
19 TECHNICAL DESCRIPTION Hydraulic Pumps: Tandem pumps: Boom lift / Telescope Power steering / Outriggers and Swing Single pump: Main and auxiliary hoist pump 39 3,500 psi 21 2,500 psi 53 3,500 psi Hydraulic oil reservoir capacity Hydraulic oil suction filter Hydraulic oil return filter 94 gallons 250 microns 5 microns Vehicle performance Standard configuration: Max. in 1 st gear % Max. in 6 th gear 3.77 % Max. (6 th gear) 24.5 mph Tires Wide tread earth mover pattern (E3) Standard configuration: 20.5 x PR Wide tread earth mover pattern (E3) Optional configuration: x PR Spare wheel 20.5 x PR 19
20 NOTES 20
21 NOTES 21
22 Effective Date: November Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Copyright Terex Cranes 2013 Terex Cranes, Global Marketing, Dinglerstraße 24, Zweibrücken, Germany Tel. +49 (0) , [email protected], Brochure Reference: TC-DS-I-E--11/13
RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
Boom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
Tabela de Carga: Grove RT 522B - Comercial
Tabela de Carga: Grove RT 522B - Comercial Desenvolvedor autorizado Dimensions 11' 1-3/8" (3387) TAILSWING 18' 6" (5639) EXT 13' (3962) MID EXT 7' 6-3/4" () RET 8' 5 1/2" (78) 8' 2" (2489) ' 3-3/8" (9229)
RT530E. product guide. contents. features 30 ton (30 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.
product guide contents Features 2 features ton ( mt) capacity 29-95 ft. (8.8-29 m) 4-section full power boom 26- ft. (7.9-13.7 m) telescopic swingaway extension Max main boom tip height of 2.5 ft. (31.2
ALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions 26' 7" (8 100) R 37' 2" (11 325) Ra 34' (10 350) R 35' 4" (10 775) Ra 32' 5" (9 875) 18' 3" (5 570) 8' 4" (2 530) R 26' 11" (8 200) Ra 24' (7 325) 42' 0" (12 795)
IC-200-H. Tech Spec. Industrial Crane. 15-Ton Max. Capacity Under 8 Feet Wide. Manufacturing Corp. Rated Capacity Limiter...
Tech Spec IC-200-H Industrial Crane 15-Ton Max. Capacity Under 8 Feet Wide Rated Capacity Limiter... Standard Capacity on Outriggers... 30,000 lbs Pick and Carry Capacity... up to 17,000 lbs Height...
18' 3" (5563) 17.5 X 25 20.5 X 25 6' 6" (1981) 10' 5" (3175) 8' (2438) 10' 6" (3200) (70' BOOM) NA 11' 6" (3505)
Dimensions 15' 11" (4851) I A C 14' 6" (4420) 18' 3" (5563) A B C D E F G TIRE SIZE (TRACK) (O.A.H) (O.A.W) (60' BOOM) (70' BOOM) GROUND CLEARANCE (60' BOOM) H (70' BOOM) I (TAILSWING) (60' BOOM) (70'
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
RT600E. product guide. contents
product guide contents Features 2 features 33-5 ft. (-32 m) 4-section full power boom 29-51 ft. (8.8-15.5 m) telescopic swingaway extension Max main boom tip height of 112 ft. (34 m) E Series cab Max overall
Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : BME800G Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Length : 54.9 m BME800G CONTENTS 3 5 6 7 8 9 10 11 12 13 14 17 SPECIFICATIONS Power Plant Model: HINO P11C-VC Type:
EHP-Electro Proportional Joystick Controls
RT 6 (offsettable) EHP-Electro Proportional Joystick Controls Electro-Proportional Joystick C RT 600 Series 60- Rough Terrain Crane 111 ft (33.8 m) FOUR SECTION, FULL POWER BOOM WITH FOOT PEDAL CONTROL
TR-500XL-3. 50 Ton Capacity (45.4 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS. MIN. 34' 9-1/4" (10.6m) MAX. 110' 6-3/4" (33.
TR-500XL-3 50 Ton Capacity (45.4 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS MIN. 34' 9-1/4" (10.6m) MAX. 110' 6-3/4" (33.7m) 6' (1.83m) 12' 4 (3.76m) 12' 2" (3.71m) 11' 6-1/4" (3.51m) 12' 1-1/4"
SPEC. SHEET TR-500EX. Left hand steeri ng. 4-section, 10.7 m - 34.1 m DIMENSIONS. approx. approx. approx. 43,100 kg - front axle. approx.
SPEC. SHEET TR-500EX Left hand steeri ng No. TR-500E-2-01202/EX-50 GENERAL DATA CRANE BOOM CAPACTY 50,000 kg at 3.5 m 4-section, 10.7 m - 34.1 m DMENSONS Overall length Overall width 13,570 mm 3,315 mm
JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
TT-300XL. 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS
TT-300XL 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS GENERAL DIMENSIONS Feet Meters TRAVELING Turning radius Max. traveling speed 80.8mph (130km/h) Front tire (curb to curb) 33.7'
Technical Data. Specifications & Capacities. Telescopic Boom Rough Terrain Crane 50 US ton 50 metric ton
1 Technical Data Specifications & Capacities Telescopic Boom Rough Terrain Crane 50 US ton 50 metric ton ; ; ;I W 4 SN-; 3 ST4 R P FR 7 N- 0 EU P I 0 TC-0 N 5 YTI1 G 6 O 4 N 4 S ;D N GE R ;D ; N 2 GE 8
Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
Grove RT890E. Product Guide. Features. 80 t (90 USt) capacity. 11,4 m 43,2 m (38 ft 142 ft) five-section, full power boom
Grove RT890E Product Guide Features 80 t (90 USt) capacity 11,4 m 43,2 m (38 ft 142 ft) five-section, full power boom 10 m 17 m (33 ft 56 ft) offsettable bi-fold lattice, swingaway extension 4,8 m (16
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : 7250S Max. Lifting Capacity: 250 t x 4.6 m Max. Lifting Capacity With ower Jib: 25.0 t x 18.0 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 91.4 m Max. Fixed Jib
221E. w/45% transfer on front axles Front axle Differential ratio 3.66 Planetary ratio 6.00 Final axle ratio 22.00
221E ARTICULATED WHEEL LOADER TIER III CERTIFIED I SERIES 3 ENGINE Model Case 432T/M3 Type 4-stroke Cylinders 4 Bore/Stroke 3.89 in x 4.09 in (99 X 104 mm) Displacement 195 in 5 (3.2 L) Fuel injection
Kubota Tractor B50 Cab
Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine
4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty
4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The
Lattice crawler cranes
Lattice crawler cranes Range brochure metric / imperial RELIABLE LIFTING POWER HC 80 HC 110-1 HC 165 HC 230 HC 285 DELIVERING SUCCESS Reliable, cost-effective and easy to operate, Terex crawler cranes
Mobile crane LTM 1130-5.1. Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m
Mobile crane LTM 1130-5.1 Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m Mobile Crane LTM 1130-5.1 Flexible and economical to operate 2 LTM 1130-5.1 The Liebherr LTM 1130-5.1
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKS600 Max. Lifting Capacity: 60 t x 3.0 m * Max. Crane Boom Length: 51.8 m Max. Fixed Jib Combination: 39.6 m + 18.3 m 42.7 m + 12.2 m * c/w = 11.0 t CKS600 CONENS 3 5
Grove RT880E. Product Guide. Features
Grove RT880E Product Guide Features 75 t (80 USt) capacity 12,6 m - 39,0 m (41 ft - 128 ft) four-section, full power boom 10,0 m - 17,0 m (33 ft - 56 ft) offsettable lattice swingaway extension 6,1 m (20
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE800G Max. Lifting Capacities : 80 t x 3.0 m Max. Crane Boom Length : 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKE800G CONENS 3 SPECIFICAIONS
PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
4.4 ton (4.0 metric ton) - Weighted hook with swivel and BOOM ELEVATION - By a double acting hydraulic cylinder
GR-300XL - 1 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS GENERAL DIMENSIONS (20.5 X 25 Tires) Feet Meters Turning radius 4 wheel steer 20' 12" 6.4 2 wheel steer 36' 5" 11.1
303.5C CR Mini Hydraulic Excavator
303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab
Product advantages Mobile crane 1090/2
Product advantages Mobile crane 1090/2 Max. lifting capacity: 90 t at 3 m radius Max. height under hook: 72 m with biparted swing-away jib Max. radius: 56 m with biparted swing-away jib Performance profile
HOW HYDRAULIC TRUCK CRANES WORK
HOW HYDRAULIC TRUCK CRANES WORK Heavy rains spawned by Hurricane Danny flooded many parts of Charlotte, NC. Flood waters rose so quickly in Little Sugar Creek that the underpinnings of a train trestle
LOAD CHART & RIGGING LEARNING GUIDE
LOAD CHART & RIGGING LEARNING GUIDE MOBILE HYDRAULIC CRANE 80 Tonnes & Under Tadano GR-600XL-1 60 Ton Hydraulic Rough Terrain Crane CraneSafe Certification Mobile Hydraulic 80 Tonnes & Under LEARNING GUIDE
Appendix A1- Technical Specifications
Appendix A1- Technical Specifications 1. INTENDED USE 1.1. THE REACHSTACKERS (R.S) WILL BE USED AT ISR's sites THE R.S WILL BE USED FOR HANDLING OF 20' - 40' ISO CONTAINERS IN CONFINED AREAS WITH LIMITED
VOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
» 30,000 to 60,000 lb. capacity» Single and tandem axle
ROLL-OFF CABLE HOISTS Tel: 800.285.0666 [email protected] www.wastequip.com Extendable Tail (EX) cable hoists are ideal for areas with clearance issues that require a low loading height.» 30,000 to 60,000
NEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55
NEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55 WORKMASTER Tractors Dependable power Available in 39 and 47 PTO horsepower, WORKMASTER tractors offer reliable power to handle a wide variety of chores.
LIFT TRUCKS REACH STACKERS ROBUST, FLEXIBLE AND POWERFUL
LIFT TRUCKS REACH STACKERS ROBUST, FLEXIBLE AND POWERFUL REACHING HIGH TEREX REACH STACKERS Terex Port Solutions (TPS) offers a comprehensive portfolio of logistics solutions and state-of-the-art cargo
304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity
CX (T3), great performance for unlimited versatility
CX90-100-110 (T3) The CX range is equipped with the new TIER-3 compliant Perkins 1104D series turbo engines. With powers of up to 102 hp, the new engines provide exceptional power and torque levels. The
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE800G Max. Lifting Capacity : 80 t x 3.0 m Max. Crane oom Length : 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKE800G CONENS 3 SPECIFICAIONS 5
303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
7-SERIES PNEUMATIC 8,000 17,500 LBS
8,000 17,500 Truck Dimensions 11,000 17,500 Specifications 7FGAU/7FDAU50 L M N J I FS A H B C out 0.5 9.5 Capacity Center Capacity Center out 153.7 174. 100 100 2.4 15. 18.5 100 100 1.2 173.4 19 100 100
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
SPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
SITE DUMPERS PRODUCT RANGE
SITE DUMPERS PRODUCT RANGE MORE THAN JUST A DUMPER High performance and reliable water cooled diesel engines for smooth and economical operation Large opening service doors for best in class service access
2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
Mobile (Truck) Cranes
Mobile (Truck) Cranes Definition: A truck or mobile crane consists of an upper carriage with front end attachment such as a box or lattice type boom and optional jib (boom extension). The upper carriage
M26 T/30 T M40 T/50 T
M26 T/30 T M40 T/50 T Rough terrain specialist Capacity from 2600 kg to kg Lifting height from 3 m to 6 m 2- or 4-wheel drive models Motorization Turbo Euro III M: true rough terrain trucks The M trucks,
TRUCK MOUNTED HYDRAULIC CRANE
TRUCK MOUNTED HYDRAULIC CRANE Superstructure Specifications Boom (Standard) 36 ft. - ft. (10.9 m - 33.5 m) four section full power boom. Equipped with remote greasg les for upper wear pad area. Maximum
1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb
584 / 584HD Forwarders Engine Engine Model Cat C7 ACERT Gross Power 204 kw 274 hp Operating Specifications Load Capacity 584 18 000 kg 39,683 lb Load Capacity 584HD 20 000 kg 44,092 lb Operating Weight
FORKLIFT STABILITY. MATERIAL HANDING AND ROBOTICS I. Practical course. Dávid HURI office door number: 324/6 [email protected].
FORKLIFT STABILITY MATERIAL HANDING AND ROBOTICS I. Practical course Dávid HURI office door number: 324/6 [email protected] What is a powered industrial truck (P.I.T.)? Definition: A powered vehicle
S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
SERIES II 75-ton (70.0 mt) Hydraulic Truck Crane. SERIES II 75-ton (70.0 mt) Truck Terrain Crane
SERIES II 75-ton (70.0 mt) Hydraulic Truck Crane SERIES II 75-ton (70.0 mt) Truck Terrain Crane The HTT s all-wheel steer provides outstanding on-site mobility. 75 tons at 9 ft radius (70.0 mt at 2.5m
E08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
With an excellent weight-to-power ratio of 37 kg/hp, the C-L model is ideal for general field work, as well as for PTO and transport applications.
Specially designed for farming applications with state-of-the-art technical solutions, the new Perkins engines meet the Tier 3 emission standards, while providing high power and torque levels with low
STOUCO Drilling Equipment
STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift
304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
TRUCK MOUNTED HYDRAULIC CRANE
TRUCK MOUNTED HYDRAULIC CRANE Superstructure Specifications Boom (Standard) 36 ft. - ft. (10.9 m - 33.5 m) four section full power boom. Equipped with remote greasg les for upper wear pad area. Maximum
L-1350 LOADER SPECIFICATIONS. 84,000 lbs (38,102 kgs) 28 yd 3 (21.41 m 3 ) Standard Operating Capacity. L-1350 Rev 9/04
L-1350 Rev 9/04 LOADER SPECIFICATIONS Note: Optional equipment shown in photo. L-1350 84,000 lbs (38,102 kgs) 28 yd 3 (21.41 m 3 ) Standard Operating Capacity POWER MODULE PROPULSION SYSTEM DIESEL POWER
IC-35-2F. Tech Spec. Industrial Crane. Small in size with big crane features. Manufacturing Corp. Rated Capacity Limiter...
Tech Spec IC-35-2F Industrial Crane Small in size with big crane features Rated Capacity imiter... Standard Capacity on Outriggers... 8,000 lbs (3,620 kg) Pick and Carry Capacity... up to 6,700 lbs (3,040
EC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM
VOLVO EXCAVATOR EC210 LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM Engine power, gross: 119 kw (160 hp) Operating weight: _ LC : 20.5 ~ 21.9 t _ NLC : 20.4 ~ 21.2 t Buckets (SAE): 950 ~ 1250
JCB TELESCOPIC WHEELED LOADERS TM310, TM310S, TM220 AND TM180
JCB TELESCOPIC WHEELED LOADERS TM30, TM30S, TM220 AND TM80 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability
17,500-33,000 lb Capacity Diesel Pneumatic Tire Lift Trucks
17,500-33,000 lb Capacity Diesel Pneumatic Tire Lift Trucks Relentless Performance Make short work of big jobs with durable, heavy-duty Cat lift trucks. Built to last, they feature a rugged 131-horsepower
RH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
D6R Series III Track-Type Tractor
D6R Series III Track-Type Tractor Engine Engine Model Cat C9 ACERT Net Power ISO 9249 138 kw 185 hp Engine XL/XW/LGP Net Power ISO 9249 149 kw 200 hp Weights Operating Weight 18 669 kg 41,159 lb Shipping
Kobelco Extended Warranty Program. www.kobelco-europe.com
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
L-2350 LOADER SPECIFICATIONS. 160,000 lbs (72,574 kgs) 53 yd 3 (40.52 m 3 ) Standard Operating Capacity. L-2350 Rev 9/04
L-2350 Rev 9/04 LOADER SPECIFICATIONS Note: Optional equipment shown in photo. L-2350 160,000 lbs (72,574 kgs) 53 yd 3 (40.52 m 3 ) Standard Operating Capacity POWER MODULE PROPULSION SYSTEM DIESEL POWER
Valtra A Series Compact and Orchard models A53 / A63 / A73
Valtra A Series Compact and Orchard models A53 / A63 / A73 Full range of tractors in all size classes Individually Yours 2 Valtra is the one and only tractor manufacturer in the Nordic region. Our roots
SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
MANTSINEN. HybriLift. More load, less energy.
7 HybriLift More load, less energy. 7 HybriLift Lift your efficiency to the next level with hydraulic speed and precision. Aliağa, Turkey HybriLift Increases Energy Efficiency by up to 5% Nakhodka, Russia
Agri Star 37.7 37.8 35.10 38.10
..8. 8. gri Star PERORMNE..8. 8. Maximum capacity (kg)....8 Maximum lifting height (m),,9 9, 9, Maximum horizontal outreach (m),,,, Outreach at maximum height (m),,,8,8 ork swivelling angle Pull-out force
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
RTC-8065 65-ton. Hydraulic Rough Terrain Crane. The New RTC-8065 Features The Confined Area Lifting Capacities (CALC) System
R CONSTRUCTION EQUIPMENT RTC-8065 65-ton Hydraulic Rough Terrain Crane 184' (56.08 m) On-Board Tip Height Full Power Four-Section Boom Rated Capacity Limiter (RCL) Three Attachment Options The New RTC-8065
Cat Electronic Technician 2015C v1.0 Product Status Report 2/16/2016 9:19 AM
Cat Electronic Technician 2015C v1.0 Product Report 2/16/2016 9:19 AM Product Report Product ID Comments Unavailable H2A00626 3054 M313C (CRX13565) H2A00626 Engine Serial Number CRX13565 ECM Serial Number
Information and Instructions
Information and Instructions This shop manual contains several sections each covering a specific group of wheel type tractors. The Tab Index on the preceding page can be used to locate the section pertaining
8.70 m. Loading and cleaning machine. Technical innovation
Class Leaders Loading and cleaning machine Technical innovation Effective cleaning Careful handling of beets Tremendous load-carrying capacity Very high user-safety The euro MAUS has been greatly improved
HEAVY DUTY BASE MACHINE FOR FOUNDATION WORK
HEAVY DUY ASE MACHINE FOR FOUNDAION WORK Max. Lifting Capacity: 80 t x 3.7 m Max. Crane oom : 54.9 m CONFIGURAION Crane oom Max. Lifting Capacity: 80 metric ton x 3.7 m Max. oom : 54.9 m Clamshell Max.
THE VERSATILE A COMPLETE SOLUTION
THE VERSATILE A COMPLETE SOLUTION Emissions-compliant, fuel-efficient 134 HP Cummins diesel Quick Coupler and parallelogram lift arm linkage standard Third hydraulic spool optional Accepts a wide assortment
FTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
Potain Igo 42. Product Guide. Features. 4000 kg (8818 lb) maximum capacity. 1100 kg (2425 lb) capacity at 36 m (118 ft)
Potain Igo 42 Product Guide Features 4000 kg (8818 lb) maximum capacity 1100 kg (2425 lb) capacity at 36 m (118 ft) 36 m (118 ft) maximum operating hook radius 33 m (108 ft) maximum hook height with 36
TRAILER MATE SPECIFICATIONS. TM50 2-Wheel Drive 3-Wheel Drive
TRAILER MATE SPECIFICATIONS TM50 2-Wheel Drive 3-Wheel Drive TABLE OF CONTENTS TM50 2-WD / 3-WD Specifications / Dimensions. 1 General Specifications.... 2 Weights / Travel Speed / Tilt Table Degrees /
SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
Skid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
308E CR SB. Mini Hydraulic Excavator with Swing Boom
308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum
The folding ROPS, available on the platform version, allows the operators to manoeuvre with ease when space is at a premium.
Available in the V (T3) series for vineyards and the F-N (T3) series for narrow orchards, this ultra-compact tractor range has been redesigned to offer improved gearbox controls, a new steering wheel with
R 994 B. Technical Description Hydraulic Excavator
Technical Description ydraulic Excavator R 994 B litronic` Operating weight with backhoe attachment 296,00 t/652,570 lb Operating weight with shovel attachment 300,50 t/662,490 lb Engine output 1500 P
A PRODUCTION POWERHOUSE
115 115 A PRODUCTION POWERHOUSE A COMPLETE SOLUTION Emissions-compliant 480 HP Cummins diesel 8.3 cu. yard to 8.5 cu. yard buckets available Dual Z-linkage arms heaviest in its class Ride Control provides
Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60
Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Safety To adapt to different operating conditions and customer requirements, all performance parameters are adjustable.
