EHP-Electro Proportional Joystick Controls

Transcription

1 RT 6

2 (offsettable) EHP-Electro Proportional Joystick Controls

3 Electro-Proportional Joystick C

4 RT 600 Series 60- Rough Terrain Crane 111 ft (33.8 m) FOUR SECTION, FULL POWER BOOM WITH FOOT PEDAL CONTROL High strength, four plate construction welded inside and out with embossed side plate holes to reduce weight and increase strength. Single boom hoist cylinder provides boom elevation of 4º to 80º for easier reeving changes and close radius operation. Quick reeving boom head; no need to remove wedge from socket. 360º house lock standard. ENVIRONMENTAL OPERATOR S CAB Rated Capacity Indicator (RCI) system including anti-two block system with automatic function disconnects. Deluxe six-way adjustable operator s seat has mechanical suspension and head and arm rests. Sound and weather insulated for comfort. Removable front window, hinged tinted glass skylight, and sliding righthand window. Armrest mounted dual axis controls for winch(s), swing, and boom elevation; foot control pedals for swing brake, boom telescope, and throttle. Full powershift transmission with integral torque converter; neutral safety start; 6 speeds forward and reverse. Hydraulic four-wheel power steering for 2- wheel, 4-wheel or crab steer. Split system air brakes on all four wheels (disc) Fully independent hydraulic outriggers may be utilized fully extended to 26 ft. (7.92 m), in their 1/2 extended position, or fully retracted. Tail Swing only 11 6 (3.5m) Standard Cummins QSB5.9 2 horsepower engine. (161 kw) Earthmover style 29. x 28 P.R. tires POWERFUL, TWO-SPEED WINCHES 479 fpm (146.0 m/min) maximum line speed, 18,4 lbs. (8369 kg) maximum line pull. Armrest mounted control. Integral automatic brake. Hydraulic reservoir with 116 gal. (439 L) capacity and full flow oil filtration system. OPTIONS INCLUDE: 32 ft. or 33 to 57 ft. (9.68 or. to 17. m) swing-on jib. Both offset to 0º, º or º. Heater/Defroster, air conditioner for operator s cab. Auxiliary winch with rope. Work lights. Cold weather kit for cab. Independent rear wheels steering. AM/FM cassette radio. Complete instrumentation. Environmentally-sealed rocker switches. Circuit breakers in cab. Electronic drum rotation indicators. Winch drum rollers, tapered drum flanges. Terex reserves the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty applicable to the particular product and sale. We make no other warranty, expressed or implied. RUGGED, EASY-TO-MANEUVER CARRIER Box-type chassis construction with reinforcing cross members. Chassis is Terex designed and built with 4x 4 X 4 drive. HIGH CAPACITY, DEPENDABLE HYRAULIC SYSTEM Three gear type pumps, one single and two in tandem, driven off the transmission. Combined system capability is 113 (428 lpm). Includes pump disconnect on tandem pump. Waverly Operations 6 th Street S.E. Waverly, IA USA Phone: (319) 2-39 Fax: (319) inquire@terexwaverly.com web: For more information, product demonstration, or details on purchase, lease and rental plans, please contact your local Terex Cranes Distributor. Terex Cranes Inc. 03 T74-03

5

6 STANDARD UPPERSTRUCTURE EQUIPMENT UPPER STRUCTUR E FRAME All welded one-piece structure fabricated with high tensile strength alloy steel. Counterweight is bolted to frame. TURNTABLE CONNECTION Swing bearing is a single row, ball type, with internal teeth. The swing bearing is bolted to the revolving upperstructure and to the carrier frame. SWING A hydraulic motor drives a double planetary reduction gear for precise and smooth swing function. Swing speed (no load) is 1.9 rpm. SWING BR AK E Heavy duty multiple disc swing brake is mechanically actuated from operator's cab by foot pedal. Brake may be locked on or used as a momentary brake. A 360 o house mechanical house lock is standard. RATED CAPACITY INDICATOR R ated C apacity I ndicator with visual and audible warning system and automatic function disconnects. Second generation pictographic display includes: boom radius, boom angle, boom length, allowable load, actual load, and percentage of allowable load registered by bar graph. Operator settable alarms provided for swing angle, boom length, boom angle, tip height, and work area exclusion zone. Anti -two block system includes audio/visual warning and automatic function disconnects. OPERATOR'S CAB Environmental cab with all steel construction, optimum visibility, tinted safety glass throughout, and rubber floor matting is mounted on vibration absorbing pads. The cab has a sliding door on the left side, framed sliding window on the right side, hinged tinted all glass skylight and removable front windshield to provide optimum visibility of the load open or closed. Acoustical foam padding insulates against sound and weather. The deluxe six-way adjustable seat is equipped with a mechanical suspension and includes head and arm rests. CONTROLS Armrest mounted dual axis controls for winch(s), swing, and boom elevation. Winch rotation indication incorporated into control handles. Armrest swings up to improve access and egress. Vernier adjustable hand throttle included. Steering column mounted turn signal, wiper, and shift controls. Switches include ignition, engine stop, lights, horn, roof window wiper, defroster, steering mode, parking brake, outriggers, 360 o house lock, etc. Horn and winch speed shift switches are mounted in the levers. Foot control pedals include swing brake, boom telescope, service brake, and accelerator. INST R UME NT A T ION AND ACC E SSOR IE S In-cab gauges include air pressure, bubble level, engine oil pressure, fuel, engine temperature, voltmeter, transmission temperature, and transmission oil pressure. Indicators include low air, high water temperature, low oil pressure, high transmission temperature, and low coolant level audio/visual warning, hoist drum rotation indicator(s), and Rated C apacity Indicator. Accessories include fire extinguisher; light package including headlights, tail light, brake lights, directional signals, four-way hazard flashers, dome light, and back-up lights with audible back-up alarm; windshield washer/wiper; skylight wiper; R.H. and L.H. rear view mirrors; dash lights; and seat belt. C ircuit breakers protect electrical circuits. HYDRAULIC CONTROL VALVES V alves are mounted on the rear of the upperstructure and are easily accessible. V alves have electric/hydraulic operators and include one pressure compensated two spool valve for boom elevation and telescope. One pressure compensated two spool valve for main and auxiliary winch, and one single spool valve for swing. Quick disconnects are provided for ease of installation of pressure check gauges. OPTIONAL EQUIPMENT Auxiliary Winch C Single axis armrest mounted controllers C LP Heater/Defroster C Hydraulically powered A ir Conditioner with or without hydraulic heater C Diesel Heater/Defroster C Work Lights C R otating Beacon STANDARD CARRIER EQUIPMENT CAR RIER CHASSIS Chassis is Terex designed with four-wheel drive and four-wheel steer (4X 4X 4). Has box-type construction with reinforcing cross members, a precision machined turn table mounting plate and integrally welded outrigger boxes. Decking has anti-skid surfaces, including between the frame rails lockable front tool storage compartment, and access steps and handles on the left and right sides and on all four corners. AXLES AND SUSPENSION R ear axle is a planetary drive/steer type with.5 in (0.26m) of total oscillation. Automatic oscillation lockouts that engage when the superstructure is swung o in either direction. Front axle is a planetary drive/steer type, rigid mounted to the frame for increased stability. T urning radius Curb clearance (to C L of outside tire.) R adius Two-wheel: 41' 7" (.7 m) 43' 2" (13.2 m) Four-wheel: 22' " (7.0 m) 24' 7" (7.5 m) TRANSMISSION Range shift type power-shift power-shift transmission with integral torque converter provides 6 speeds forward and 6 speeds reverse with neutral safety start. Four wheel drive engages automatically with low range and two wheel drive with high range. Automatic pulsating back-up alarm. ST E ER ING Hydraulic four-wheel full power steering for two-wheel, four-wheel coordinated, or four-wheel crab steer is easily controlled by steering wheel. A rear axle centering light is provided.

7 STANDARD CARRIER EQUIPMENT(continued) MUL TI-POSITION OUT & DOWN OUTRIGGERS Fully independent hydraulic outriggers may be utilized fully extended to 24 ft. (7.32 m) centerline to centerline, in their ½ extended position, or fully retracted for maximum flexibility. Easily removable Almag floats, each with an area of 4 in 2 (1639 cm 2 ), stow on the outrigger boxes at their point of use. Complete controls and a sight leveling bubble are located in the operator's cab. WHEELS & TIRES Disc type wheels with full tapered bead seat rim in (4.0 m) wheelbase. TIRES W ide earthmover (E 3) style tread tires provide life and flotation. 29.x, 28 P.R. - std. SE R VICE BR AK E S Split system air over hydraulic 18.5" (470 mm) diameter disc dual caliper brakes on all wheels. PARK ING BRAK E Front axle equipped with spring-set, air released parking brake. OPTIONAL EQUIPMENT Immersion Heater C Pintle Hook C Clearance Lights C Independent R ear Wheel Steer C Four Mode Rear Wheel Steer C,000 lb line pull front mounted winch HYDRAULIC SYSTEM HYDR AULIC PUMPS T hree gear type pumps, one single and two in tandem, driven off the transmission. Combined system capability is 113 gpm (428 lpm). Includes pump disconnect on winch pump. M ain and Auxil iar y W inch Pump 52.7 gpm ( ,0 psi (316.4 kg/cm 2 ) Boom Hoist, T elescope Pump 37.3 gpm ( ,0 psi (246.1 kg/cm 2 ) Power Steer ing, Outrigger and Swing Pump 18.7 gpm (70.8 3,0 psi (246.1 kg/cm 2 ) FILTRATION Full flow oil filtration system with bypass protection includes a removable 60 mesh (0 micron) suction screen-type filter and 5 micron replaceable return line filter. HYDRAULIC R ESERV OIR All steel, welded construction with internal baffles and diffuser. Provides easy access to filters and is equipped with an external sight level gauge. The hydraulic tank is pressurized to aid in keeping out contaminants and in reducing potential pump cavitation. Capacity is 116 gal (439 liters). Hydraulic oil cooler is standard. MAIN WINCH SPECIFICATION Hydraulic winch with bent axis piston motor and planetary reduction gearing provides 2-speed operation with equal speeds for power up and down. W inch is equipped with an integral automatic brake, grooved drum, tapered flanges, standard cable roller on drum, and an electronic drum rotation indicator. PERFORMANCE LO-RANGE HI-RANGE Max. line speed (no load) First layer 187 fpm (57.0m/min) 0 fpm (91.4 m/min) Fifth layer 269 fpm (82.0 m/min) 431 fpm (131.4 m/min) Max. line pull-first layer 18,4 lbs (8 369 kg),002 lbs (4 537 kg) Max. line pull-fifth layer,8 lbs (5 826 kg) 6,963 lbs (3 8 kg) Permissible line pull 13,800 lbs (6 260 kg) OPTIONAL AUX. WINCH Hydraulic 2-speed winch with bent axis piston motor, equal speed power up and down, planetary reduction with integral automatic brake, grooved drum with tapered flanges, drum roller, and rotation indicator. PERFORMANCE Max. line speed (no load) Fifth layer 431 fpm (131.4 m/min) Max. line pull First layer 18,4 lbs (8 369 kg) DR UM DIME NSIONS AND CAPACIT Y (Same as main winch) DR UM DIME NSIONS DR UM CAPACIT Y in (3 mm) drum diameter Max. Storage: 561 ft (171.0 m).16 in (5 mm) length Max. Useable: 561 ft (171.0 m) * 21.5 in (546 mm) flange dia. * B ased on minimum flange height above Cable: ¾" x 600 ft (19 mm x m) top layer to comply with ANSI B.5 Cable type:¾" (19mm) 6x19 I WR C, X IPS, right regular lay, preformed. M in breaking strength 29.4 tons (26.6 mt) ENGINE SPECIFICATIONS Make and Model Cummins QSB-2 Type 6 cylinder B ore and Stroke 4.02 x 4.72 in (2x1 mm) Displacement 9 cu in (5.9 l) R ated HP 2 hp ( rpm Maximum Gross HP 2 hp ( rpm Maximum Gross T orque 6 lbcft( rpm Aspiration turbocharged & charge air cooled Air Filter dry type Electrical System volt Alternator 2 amp B attery (2) V CCA Fuel Capacity gal (189 l) OPTIONAL HOIST L INE MAIN WINCH AND OPTIONAL AUXILIARY W I NC H -¾" (19mm) rotation resi stant compacted strand 34x7 Grade Min breaking strength 34.5 tons (31.7 mt). PERFORMANCE (Standard Engine) Trans- Maximum Grademission Forward Maximum Tractive ability Gear Drive Speed Stall 1 4-wheel 1.9 mph (3.1 kph) 86,3 lbs (39 9 kg) 7.6% 2 4-wheel 3.8 mph (6.1 kph) 41,547 lbs (18 8 kg) 48.5% 3 4-wheel 9.6 mph (.4 kph),2 lbs (6 904 kg) 34.7% 4 2-wheel 5.2 mph (8.4 kph) 29,686 lbs (13 4 kg) 18.0% 5 2-wheel.3 mph (16.6 kph) 14,260 lbs (6 468 kg).0% 6 2-wheel 23.4 mph (37.7 kph) 5,211 lbs (2 364 kg) 5.9% All performance data is based on a gross vehicle weight of 92,000 lbs (41 7 kg), 29.5x tires, 4x4 drive. Performance may vary due to engine performance. Gradeability data is theoretical and is limited by tire slip, machine stability, or oil pan design.

8 Substitute: 600 of 34x7 class spin resistant wire rope

9

10 Lifting Capacities Pounds ( boom) ON OUTRIGGERS - FULLY EXTENDED CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with the machine chart and may be subject to change. BOOM LENGTH 36 FT BOOM LENGTH FT BOOM LENGTH 66 FT BOOM BOOM BOOM ANGLE OVER ANGLE OVER ANGLE OVER (DEG) FRONT 360 (DEG) FRONT 360 (DEG) FRONT 360 REF. (LB) (LB) REF. (LB) (LB) REF. (LB) (LB) ,000* 1,000* ,0* 80,0* ,800* 6,800* ,0* 80,0* ,0* 85,900* ,0* 78,0* ,000* 62,000* ,0* 62,0* ,0* 63,0* ,900* 54,900*.9 47,700* 47,700*.3 48,900* 48,900* ,0* 49,0* ,800* 37,800* ,0* 39,0* ,900* 39,900* ** ,0* 32,0* ,000* 33,000* ,0* 27, ,700 27,0.0 22,0 21, ,000 2,0 ** ,0 18, ,000, ,0,700 ** COUNTERWEIGHT: W/AUX. WINCH 13,0 LBS. W/O AUX. WINCH 14,0 LBS. BOOM LENGTH FT. OUTRIGGER SPREAD 24 FT. MODEL RT 6 STABILITY PCT. ON OUTRIGGERS 85% ON TIRES % PCSA CLASS -270 USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE FULLY EXTENDED ON OUTRIGGERS - FULLY EXTENDED BOOM LENGTH 81 FT BOOM LENGTH 96 FT BOOM LENGTH 111 FT BOOM BOOM BOOM ANGLE OVER ANGLE OVER ANGLE OVER (DEG) FRONT 360 (DEG) FRONT 360 (DEG) FRONT 360 REF. (LB) (LB) REF. (LB) (LB) REF. (LB) (LB) ,0* 46,0* 69.0,800*,800* 72.4,0*,0*.2 36,0* 36,0* ,0* 31,0* ,600* 27,600* ,0* 32,0* ,0* 28,0* ,900* 24,900* ,0* 27, ,0*,0* ,600* 22,600* ,0 22, ,0* 22, ,700*,700* ,0 18, ,600 18, ,900* 18,900* ,0, ,600, ,700, ,000 13, ,0 13, ,0 13,0 31.3,000 11,0 43.9,0 11,0.5,0 11, ,0 9, ,600 9, ,800, ,900 8, ,0 8, ,0 8,700 ** ,0 7,0.7 8,0 7, ,000 6, ,0 6, ,000 5, ,0 5,700 ** ,0 4, ,800 4,0.2 4,0 3,600 ** ** MAXIMUM CAPACITY AT 0 DEGREE BOOM ANGLE BOOM LENGTH 36 FT BOOM LENGTH FT BOOM LENGTH 66 FT BOOM LENGTH 81 FT BOOM LENGTH 96 FT BOOM LENGTH 111 FT OVER OVER OVER OVER OVER OVER FRONT 360 FRONT 360 FRONT 360 FRONT 360 FRONT 360 FRONT 360 (LB) (LB) (LB) (LB) (LB) (LB) (LB) (LB) (LB) (LB) (LB) (LB) 31.7,0*,0* 46.7,0*,0* ,000* 8,000* ,0* 5,0* ,0* 3,0* 6.7 2,0* 2,0* 2

11 Lifting Capacities Pounds ( boom) CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with the machine chart and may be subject to change. COUNTERWEIGHT: W/AUX. WINCH 13,0 LBS. W/O AUX. WINCH 14,0 LBS. BOOM LENGTH FT. OUTRIGGER SPREAD 24 FT. MODEL RT 6 STABILITY PCT. ON OUTRIGGERS 85% ON TIRES % PCSA CLASS -270 ON OUTRIGGERS - MID POSITION BOOM LENGTH 36 FT BOOM LENGTH FT BOOM LENGTH 66 FT BOOM LENGTH 81 FT BOOM LENGTH 96 FT BOOM LENGTH 111 FT BOOM BOOM BOOM BOOM BOOM BOOM ANGLE ANGLE ANGLE ANGLE ANGLE ANGLE (DEG) 360 (DEG) 360 (DEG) 360 (DEG) 360 (DEG) 360 (DEG) 360 REF. (LB) REF. (LB) REF. (LB) REF. (LB) REF. (LB) REF. (LB) ,0* ,0* ,800* ,0* ,000* ,0* ,000* , , , ,0*.9 31,0.3 32, , , , , , , , , ,0 ** , , , , , , , , , ,600.0, , , , ,700 ** , ,0.5 9, , , , , , , , , ,0 ** , , , , , , , , ,0 ** ,0.7 2, ** MAXIMUM CAPACITY AT 0 DEGREE BOOM ANGLE BOOM LENGTH BOOM LENGTH BOOM LENGTH BOOM LENGTH BOOM LENGTH BOOM LENGTH 36 FT FT 66 FT 81 FT 96 FT 111 FT (LB) (LB) (LB) (LB) (LB) (LB) , , , ,0 USE THESE CHARTS ONLY WHEN ALL OUTRIGGERS ARE PINNED IN MID POSITION 3

12 Lifting Capacities Pounds ( boom) CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with the machine chart and may be subject to change. COUNTERWEIGHT: W/AUX. WINCH 13,0 LBS. W/O AUX. WINCH 14,0 LBS. BOOM LENGTH FT. OUTRIGGER SPREAD 24 FT. MODEL RT 6 STABILITY PCT. ON OUTRIGGERS 85% ON TIRES % PCSA CLASS -270 ON OUTRIGGERS - RETRACTED BOOM LENGTH 36 FT BOOM LENGTH FT BOOM LENGTH 66 FT BOOM LENGTH 81 FT BOOM LENGTH 96 FT BOOM LENGTH 111 FT BOOM BOOM BOOM BOOM BOOM BOOM ANGLE ANGLE ANGLE ANGLE ANGLE ANGLE (DEG) 360 (DEG) 360 (DEG) 360 (DEG) 360 (DEG) 360 (DEG) 360 REF. (LB) REF. (LB) REF. (LB) REF. (LB) REF. (LB) REF. (LB) , , , , ,0 68.1,0 73.3, , , , ,0.9, , , , , , , ,0.2,0 69.3, ,800 ** , , , , , , , , , , , , , , , ,0.5 2, ,900 ** MAXIMUM CAPACITY AT 0 DEGREE BOOM ANGLE BOOM LENGTH BOOM LENGTH BOOM LENGTH BOOM LENGTH BOOM LENGTH BOOM LENGTH 36 FT FT 66 FT 81 FT 96 FT 111 FT (LB) (LB) (LB) (LB) (LB) (LB) ,800 USE THESE CHARTS WHEN ALL OUTRIGGER BEAMS ARE NOT IN EITHER THE MID OR FULLY EXTENDED POSITION 4

13 Lifting Capacities Pounds ( boom) CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with the machine chart and may be subject to change. COUNTERWEIGHT: W/AUX. WINCH 13,0 LBS. W/O AUX. WINCH 14,0 LBS. BOOM LENGTH FT. OUTRIGGER SPREAD 24 FT. MODEL RT 6 STABILITY PCT. ON OUTRIGGERS 85% ON TIRES % PCSA CLASS -270 SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS ED BOOM ANGLE (DEG) FT OFFSETABLE JIB/NO PULL OUT INSTALLED 0 OFFSET OFFSET OFFSET (REF) (REF) (REF) FRONT FRONT FRONT ONLY 360 ONLY 360 ONLY 360 (LB) (LB) (LB) (LB) (LB) (LB),600*,600* 48 8,0* 8,0* 54 6,600* 6,600* 46 11,900* 11,900* 53 8,0* 8,0* 59 6,0* 6,0* 11,0* 11,0* 58 7,800* 7,800* 63 6,0* 6,0* 58,0*,0* 7,0* 7,0* 70 6,000* 6,000* 9,600* 9,600* 71 7,0* 7,0* 76 5,900* 5,900* 71 8,900* 8,900* 78 6,800* 6,800* 83 5,700* 5,700* 78 8,0* 8,0* 84 6,0* 6,0* 88 5,0* 5,0* 86 7,700* 7,700* 91 6,0* 6,0* 95 5,0* 5,0* 93 7,0* 6,0 98 5,900* 5,900* 2 5,0* 5,0* 0 6,000 5,0 5 5,0 5,0 8 5,000* 5,000* 6 5,0 4, ,800 4, ,700 4, ,0 3, ,0 3, ,000 3, ,0 3,0 4 3,0 2, ,0 2, ,900 2,0 1 2,800 2, ,0 2, ,0 1, FT OFFSETABLE JIB/PULL OUT RETRACTED 0 OFFSET OFFSET OFFSET (REF) (REF) (REF) FRONT FRONT FRONT ONLY 360 ONLY 360 ONLY 360 (LB) (LB) (LB) (LB) (LB) (LB) 41,600*,600* 49 8,0* 8,0* 6,600* 6,600* 47 11,900* 11,900* 54 8,0* 8,0* 60 6,0* 6,0* 52 11,0* 11,0* 59 7,800* 7,800* 64 6,0* 6,0* 59,0*,0* 66 7,0* 7,0* 71 6,000* 6,000* 66 9,600* 9,600* 72 7,0* 7,0* 77 5,900* 5,900* 72 8,900* 8,900* 79 6,800* 6,800* 84 5,700* 5,700* 79 8,0* 8,0* 85 6,0* 6,0* 89 5,0* 5,0* 87 7,600* 6, ,0* 6,0* 96 5,0* 5,0* 94 6,0 5, ,600 5,0 3 5,0* 5, ,0 4, ,800 4,0 9 4,700 4,0 7 4,0 3, ,0 3, ,000 3, ,600 3,0 1 3,0 2, ,0 2, ,800 2,0 1 2,700 2,0 6 2,600 2,0 9 2,0 1, ,0 1, ,700 1, ,700 1,0 ED BOOM ANGLE (DEG) SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS ED BOOM ANGLE (DEG) FT OFFSETABLE JIB 0 OFFSET OFFSET OFFSET (REF) (REF) (REF) FRONT FRONT FRONT ONLY 360 ONLY 360 ONLY 360 (LB) (LB) (LB) (LB) (LB) (LB) 52 6,600* 6,600* 64 4,600* 4,600* 74 3,0* 3,0* 58 6,0* 6,0* 70 4,0* 4,0* 80 3,0* 3,0* 64 5,900* 5,900* 76 4,0* 4,0* 85 3,0* 3,0* 73 5,600* 5,600* 83 3,900* 3,900* 92 3,0* 3,0* 81 5,0* 5,0* 91 3,700* 3,700* 99 3,000* 3,000* 89 4,800* 4,800* 98 3,0* 3,0* 6 2,900* 2,900* 96 4,0* 4,0* 5 3,0* 3,0* 1 2,800* 2,800* 5 4,0* 4,0* 113 3,0* 3,0* 119 2,700* 2,700* 114 3,800* 3,800* 1 3,000* 3,000* 6 2,700* 2,700* 2 3,0* 3,0* 8 2,900* 2,900* 132 2,600* 2,600* 9 3,0* 3, ,800* 2,800* 138 2,600* 2,600* 137 2,700 2, ,600 2, ,0 2,0 1 2,0 1, ,0 1, ,000 1, ,600 1,0 1 1,600 1,0 9 1,0 1, ,0 900 ED BOOM ANGLE (DEG) NOTES FOR JIB CAPACITIES A. For all boom lengths less than the maximum with a jib erected, the rated loads are determined by boom angle only in the appropriate column. ON TIRES 60 MAX BOOM LENGTH X 28PR STATIONARY PICK & CARRY STATIC CREEP 2.5 MPH 360 STRAIGHT OVER FRONT,700 87,600* 68,800,900 42,800 77,0* 60,0,0 29,0 61,0,800 37,700 17,600 37,0 37,0 28,800 11,800 22,600 22,600 22,600 8,000,700,700,700 5,700,700,700,700 4,0,0,0,0 2,900 8,0 8,0 8,0 1,900 6,0 6,0 6,0 5,0 5,0 5,0 4,0 4,0 4,0 3,0 3,0 3,0 2,700 2,700 2,700 B. For boom angle not shown, use the capacity of the next lower boom angle. C. Listed radii are for extended main boom only. NOTES FOR ON TIRE CAPACITIES A. For Pick and Carry operations, boom must be centered over the front of the crane with swing brake and lock engaged. Use minimum boom point height and keep load close to ground surface. B. The load should be restrained from swinging. NO ON TIRE OPERATION WITH JIB ERECTED. C. Without outriggers, never maneuver the boom beyond listed load radii for applicable tires to ensure stability. D. Creep speed is crane movement of less than 0 Ft. (61m) in a minute period and not exceeding 1.0 mph (1.6 km/h). E. Refer to General Notes for additional information. MAXIMUM PERMISSIBLE HOIST LINE LINE PARTS MAIN & AUX. HOIST 13,800 27,600 41,0,0 69,000 82,800 96,600 0,0 4,0 1,000 WIRE ROPE: 3/4" ROTATION RESISTANT 34 x 7 COMPACTED STRAND, GRADE 2160, MINIMUM BREAKING STRENGTH TONS. 3/4" 6 X 19 OR 6 X 37, IPS, IWRC, PREFORMED RIGHT REGULAR LAY MINIMUM BREAKING STRENGTH -.6 TONS. WEIGHT 1.04 LBS/FT. RECOMMENDED TIRE PRESSURE TIRE SIZE STATIONARY CREEP 2 1/2 MPH TRAVEL 29.5 X -28 PR 81 PSI 81 PSI PSI PSI 5

14