Slab on Ground. Load Transfer Systems. Construction Innovators

Transcription

1 Slab on Ground Load Transfer Systems Construction Innovators

2 Index 4 Diamond Dowels 6 PD³ Dowel Cradles 7 Plate Dowel Cradles 8 Square Dowels 9 Square Dowels with Dowelmaster sleeves 10 Square Dowels with Flanged Dowel Boxes 11 Square Dowels with Metal Dowel Covers 12 Square Dowel Cradles with Dowelmaster sleeves 13 Square Dowel Cradles with Metal Dowel Covers 14 Round Dowels & Shrink Wrapped Dowels 15 Round Dowel Cradles 16 Speed Sleeve 17 Tied Joint Cradles (with reinforcing bars) 18 Corrosion Free (CF) Joint System ction Innovators

3 Design and engineering experts widely acknowledge that the floor is the most important component of a warehouse or distribution centre. The capabilities of the floor are determined by storage and racking systems and the sophistication of the vehicles used to handle the warehouse contents. Poorly positioned joints or cracks in high-traffic areas can: Slow down the movement of forklifts and other materials handling equipment Cause unnecessary wear to tyres, wheels and bearings Potentially cause instability with loads Uneven floors can also result in the same negative effects and slow down production adding to running and maintenance costs. Why use high performance dowels? Dowels are required at joints in concrete slabs to transfer vertical loads across the joint and minimise differential deflection between slabs under load. Page 3

4 The most efficient dowel system available, and well-suited for construction joints. Diamond Dowels Features & benefits: Available with colour coded one-piece sleeves 6 mm are orange 10 mm are blue Ideal for perimeter-of-pour dowel applications, i.e. at construction joints No need to drill forms to support dowels during concrete pour Nailing flange provides secure attachment to form boards Flange on sleeve ensures dowel is perpendicular to form board and is stable. Each sleeve is fitted with an internal spacer to prevent collapse caused by pressure of concrete the spacer is easily displaced into the apex of the sleeve when inserting the Diamond plate Sleeves moulded from durable, non-compressible material Sleeves fitted with double-headed nails second head on nail acts as an anchor to help retain the sleeve in the concrete when stripping the form boards Reduced likelihood of sleeve knock-off when placing steel reinforcement mesh Simplifies form removal Dowel plates available in black, galvanised and stainless steel Wide dowel plate at point of maximum load reduces stress on concrete Can be integrated into other formwork systems Ergonomically designed, user-friendly packaging, complete kit with installation instructions Page 4 HOW TO SPECIFY Specify Danley Diamond Dowel (dowel size) x (dowel spacing), (finish or material). E.g. Danley 6mm Diamond Dowels at 450 mm centres, galvanised.

5 Page 5

6 PD 3 Dowel Cradles and Plate Dowel Cradles are well suited for contraction joints in concrete slabs and pavements. As well as efficiently limiting deflection, the 3 metre-long fabricated cradles ensure the dowels are set at the exact height for the specified slab thickness, and at precise spacing to minimise installation time. PD 3 Dowel Cradles Danley PD³ Dowel Cradles are tapered plate dowels assembled into cradles of 3 m nominal length. Features & benefits: Available in 6 or 10 mm thick dowels spaced at 450 or 600 mm centres, and for slab thicknesses ranging from 150 to 300 mm Dowels are colour coded: 6 mm are orange 10 mm are blue Tapered plate dowels 300 mm long; made from AS/NZS GRADE 300 steel PD³ Dowel Cradles have the same load transfer capacities and deflection characteristics as rectangular Plate Dowel Cradles. How PD 3 Dowels provide for perpendicular and parallel shrinkage If left side panel shrinks more than right side panel, differential parallel shrinkage needs to be accommodated Joint opens up due to slab shrinkage Panels shrink diagonally from corners HOW TO SPECIFY Specify PD³ Dowel Cradle OR Danley Plate Dowel Cradle (dowel size) x (dowel spacing) x (slab thickness) and (dowel material). E.g. Danley Plate Dowel Cradles 6 mm at 450 mm centres, for 150 mm slab, galvanised dowels; OR E.g. Danley PD³ Dowel Cradle 10 mm at 450 mm centres, for 150 mm slab, black dowels. A small void is developed in the concrete by the tapered dowel, allowing for differential parallel shrinkage Debonding shrinkwrap on dowels Page 6

7 Plate Dowel Cradles Features & benefits: Available for both 6 mm and 10 mm plate dowel sizes Available heights to suit slabs 100 to 300 mm thick Dowels are colour coded: 6 mm are orange 10 mm are blue Dowel plates are 300 mm long, dowel sleeves are 165 mm long Dowel plates available in black, galvanised and stainless steel Ideal for sawn contraction joints Supplied in 3 m lengths Simple installation Minimises set-up time Excellent deflection capabilities Cutting the cross wire at site. Page 7

8 Square Dowels Features: Structural grade square dowels sawn to length, not cropped. Available in 16, 20, 25, 32 and 40 mm sizes Available in 400, 500 and 600 mm lengths Available in black, galvanised and stainless steel Page 8

9 Danley s Dowelmaster sleeves allow square dowels to move both parallel and perpendicular to the construction joint as the concrete slab shrinks during curing. Simply secure the sleeves to the construction joint forms with the optional nailing plates; pour the concrete; strip the forms and insert square dowels into the sleeves ready for the second pour. Square Dowels with Dowelmaster Sleeves Nailing plate Dowelmaster sleeve Wedge Adjustable stake Features & benefits: Ideal for construction joints Dowelmaster sleeves available in 16 x 200 mm and 20 x 250 mm sizes Square dowels available for both 16 mm and 20 mm Dowelmaster sizes Dowels available in black, galvanised and stainless steel Dowelmaster sleeve supplied complete with support stake & wedge Dowelmaster sleeves provide expansion joint capability No need to drill forms to support dowels during concrete pour Nailing plate provides secure attachment to form boards Flange on nailing plate ensures dowel is perpendicular to form board and is stable HOW TO SPECIFY Specify Danley Square Dowel (dowel size) x (dowel length) x (dowel spacing) (dowel material) with Dowelmaster sleeve (and nailing plate). E.g. Danley Square Dowel 20 mm x 400 mm at 450 mm centres, galvanised with 20 mm Dowelmaster sleeve and nailing plate. Page 9

10 Ideal where high loads or high movement is anticipated at joints. Square Dowels with Flanged Dowel Boxes Features & benefits: Ideal for construction joints in both ground slabs and elevated slabs Have expansion joint capability Have large lateral movement capability Integral nailing flanges with location marks Simple installation Available for 16, 20, 25, 32 and 40 mm square dowels Boxes formed from galvanised steel sheet, with rigid foam void filler inside box HOW TO SPECIFY Specify Danley Square Dowel (dowel size) x (dowel length) x (dowel spacing) (dowel material) with Flanged Dowel Box. E.g. Danley Square Dowel 25 mm x 400 mm at 450 mm centres, galvanised with 25 mm Flanged Dowel Box. Page 10

11 Square Dowels with Metal Dowel Covers Features & benefits: Galvanised steel cover with foam strips each side sized to suit anticipated dowel movement both perpendicular and parallel to the joint Available for 16, 20, 25, 32, and 40 mm square dowels Standard type has 5 mm compressible foam each side Custom widths with thicker foam also available Ideal for use on starter dowels drilled and epoxied into existing slabs HOW TO SPECIFY Specify Danley Square Dowel (dowel size) x (dowel length) x (dowel spacing) (dowel material) with Metal Dowel Cover. E.g. Danley Square Dowel 20 mm x 400 mm at 450 mm centres, galvanised with 20 mm Metal Dowel Cover. Page 11

12 Square Dowel Cradles with Dowelmaster Sleeves Danley Square Dowel Cradles are suitable for contraction joints in concrete slabs and pavements. The 3 metre-long fabricated cradles ensure the dowels are set at the exact height for the specified slab thickness, and at precise spacing to minimise installation time. Features & benefits: Available for both 16 mm and 20 mm square dowel sizes Available heights to suit slabs 100 to 300 mm thick Dowel plates available in black, galvanised and stainless steel Supplied with Dowelmaster sleeves as standard Ideal for sawn contraction joints High load capacities Supplied in 3 m lengths Simple installation Minimises set up time NOTE: When placing concrete, care should be taken not to move the cradles, and not to stand on them. HOW TO SPECIFY Specify Danley Square Dowel Cradle (dowel size) x (dowel length) x (dowel spacing) x (slab thickness) and (dowel material), with Dowelmaster sleeves. E.g. Danley Square Dowel Cradle 20 mm x 400 mm at 450 mm centres for 200 mm slab, galvanised dowels, with Dowelmaster sleeves. Page 12

13 Features & benefits: Square dowels sizes 16, 20, 25, 32, 40 mm Standard dowels 400 mm long Dowel spacing as specified Supplied in 3 m cradle lengths Available for slabs up to 300 mm thick Dowels available in black, galvanised or stainless steel Dowel covers formed from galvanized sheet steel Foam strips inside sleeve allow for +/- 5 mm lateral movement Simple installation Minimises set up time Square Dowel Cradles with Metal Dowel Covers Page 13

14 Structural grade round dowels sawn to length, not cropped. Available in black, galvanised, stainless steel, and also shrink wrapped. Features: Structural grade round dowels sawn to length, not cropped. Available in 16, 20, 24, 27, 30, 33, 36, 39 and 42 mm diameters Available in 400, 500 and 600 mm lengths Available in black, galvanised, stainless steel and shrink wrapped Shrink wrap provides bond break Round Dowels Shrink Wrapped Dowels Round dowels with a plastic shrink wrap coating over half the length of the dowel, to provide bond break. Features: Available on 16 mm to 36 mm diameter round dowels Can be applied to black, galvanised and stainless steel dowels Page 14

15 Danley round Dowel Cradles are manufactured to meet the specifications of road authorities throughout Australia and New Zealand, and to the requirements of specific projects. Round dowels of 16, 20, 24, 27, 30, 33, 36, 39, and 42 mm diameter to AS/NZS GRADE 300 are available in stainless steel, black, galvanised and shrink wrapped. Round Dowel Cradles Features & benefits: Cradle length is nominal 3 m for dowels Sizes up to 24 mm NOTE: For larger size dowels, length is limited by maximum weight of 25 kg that can be safely handled by one man; or to specific lengths as specified by the customer Manufactured as specified for pavement thickness, dowel spacing, materials and finish HOW TO SPECIFY Specify Danley Round Dowel Cradle (dowel size) x (dowel length) x (dowel spacing) x (slab thickness) and (dowel material & finish). E.g. Danley Round Dowel Cradle 30 mm x 400 mm at 450 mm centres for 300 mm slab, galvanised dowels shrink wrapped. Page 15

16 Speed Sleeves are used with round dowels to eliminate the need for drilling formwork and greasing Dowels. Minimises vertical movement at joints. Speed sleeves are not reusable. Speed Sleeve Features & benefits: Eliminates need for drilling form boards Eliminates greased bars Minimises vertical movement at joints Reduces damage at joints Easy and quick to use Suitable for galvanised dowels Reusable nailing plate Available in sizes: 16 mm x 240 mm 16 mm x 310 mm 20 mm x 240 mm 20 mm x 310 mm Nailing plates sold separately Page 16

17 Tied Joint Cradles with Reinforcing Bars HOW TO SPECIFY Specify: Danley Tied Joint Cradles with reinforcing bars (bar size) x (bar length) x (bar spacing) x (slab thickness) and (finish). E.g. Tied Joint Cradles with N20 reinforcing bars 400 mm at 450 mm centres for 200 mm slab, galvanised dowels. Features & benefits: Wire cradle assemblies with reinforcing bars Supplied in 3 m lengths Manufactured from AS/NZS 4671 GRADE 500 reinforcing bars Available with either black or galvanised bars Page 17

18 NEW Corrosion Free Joint System y CF JOINT SYSTEM The Danley CF Joint System is a non-corroding forming system for residential, municipal and light industrial concrete slabs and pavements. No steel components in the system that can corrode Complemented with non-corroding dowel accessories suitable for vehicle load up to 10 tonnes Flexible former Construction and contraction joint formers Uv-stabilised, impact-resistant, paintable extruded PVC forms Heights of 100, 125 or 150 mm Supplied in 3 m lengths Punched at 150 mm centres for dowels Holes covered with uv-resistant pvc tape Expansion joint formers All of the above, plus; compressible closed cell polyethylene foam adhered to one face Dowel accessories Carton containing: Qty 50 pultruded glass-fibre reinforced dowels 14 mm diameter x 240 mm long Qty 50 polypropylene dowel sleeves Qty 50 polypropylene dowel sleeve support stands Qty 10 polypropylene former joiners 100% recycled dowels 100% recycled dowel sleeve & sleeve support stands HOW TO SPECIFY Supply the following data when ordering: 1. Former or expansion former 2. Former height (100, 125 or 150 mm) 3. With dowel accessories (if applicable) Page 18

19 High Performance Dowel Systems High performance dowel systems For concrete slabs and pavements NEW from Danley PD³ Dowel Cradles Construction Innovators Technical information on dowels can be found in the High Performance Dowel Systems brochure. Page 19

20 Products Diamond Dowel The most efficient Dowel system available, well suited for construction joints. Plate Dowel Cradle Efficient Plate Dowel secured in fabricated cradle, well suited for contraction joints. Metal Dowel Cover Galvanised steel cover with foam strips each side, sized to suit anticipated dowel movement both perpendicular and parallel to the joint. Square Dowels & Round Dowels Structural grade dowels sawn to length, not cropped. Speed Sleeves Plastic sleeves for round dowels that eliminate the need for drilling formwork and greasing dowels. PD³ Dowel Cradle Danley PD³ Cradles are tapered plate dowels assembled into cradles of 3 m nominal length. Flanged Dowel Box Where high loads or high movement is anticipated at the joint. Dowelmaster Dowelmaster is a plastic cover for square dowels that allows slab movement in two directions. Square Dowel Cradle & Round Dowel Cradle SQUARE - Fully welded prefabricated dowel cradles with square dowels and either Dowelmaster sleeves or metal dowel covers. ROUND - Fully welded prefabricated dowel cradles with shrink wrapped round dowels. Shrink Wrapped Dowels Shrink wrapped round dowels with a plastic shrink wrap coating for over half the length of the dowel, to provide bond break. Construction Innovators AUSTRALIA WIDE All States and Territories P: sales@danley.com.au Head Office - Brisbane AUSTRALIA Phone: +61(0) Fax: +61 (0) Steel Place Morningside QLD 4170 PO Box 297 Cannon Hill QLD 4170 Prepared by Danley Construction Products Pty Ltd ABN Various products or systems shown in this brochure are covered by Australian and / or international patents, or have patents pending, or are registered designs. Various marks in this brochure are registered trademarks. Dimensions and specifications are subject to change without prior notification by the manufacturer. All dimensions are nominal. Unless required by law the company cannot accept any responsibility for any loss, damage or consequence resulting from the use of this publication. Photographs shown are representative only of typical applications, and are current as at The information in this brochure is copyright. Copyright PRINTED NOVEMBER 2009 DCP_SOGLTS_001