Carisma CRSO. All range is compliant with the new ERP 2013 Regulation (EU) High Pressure Fan Coil Unit with Asynchronous Motor

Transcription

1 Carisma CRSO igh Pressure Fan Coil Unit with Asynchronous Motor Range includes air rates (from 375 to 2220 m 3 /h) each equipped with 3 or row coil and with the possibility to add a 1 or 2 row coil for pipe systems. It is the perfect range to meet all air-conditioning requirements of work environments like offices, shops, restaurants and hotel rooms featuring ducted installations with available pressure up to 80 Pa. All range is compliant with the new ERP 2013 Regulation (EU) No. 327/2011 which requires very low electric consumption ratings in relation to performances provided. 1

2 Technical characteristics of the main components: Casing: made from galvanized steel insulated with polyolefin (PO) foam (class M1). Filter: polypropylene cellular fabric regenerating filter. The filter frame of galvanized steel is inserted into special plastic sliding guides fastened to the internal structure for easy insertion and removal of the filter. Fan assembly: the fans have aluminium or plastic blades directly keyed on the motor with double aspiration and they are dynamically and statically balanced during manufacture in order to have an extremely quiet operation. Electric motor: the motor is wired for single phase and has five speeds, with capacitor. The motor is fitted on sealed for life bearings and is secured on anti-vibration and self-lubricating mountings. Internal thermal protection with automatic reset, protection IP 20, class B. Coil: it is manufactured from drawn copper tube and the aluminium fins are mechanically bonded onto the tube by an expansion process. The coil has two 1/2inch BSP internal connections and 1/8 inch BSP air vent and drain. The coil is not suitable for use in corrosive atmosphere or in environments where aluminium may be subject to corrosion. Flow and return pipe connections are situated at the same end on the left side looking at the unit. On request we can deliver the unit with the connections on the right end side. This operation can also be easily carried out on site during installation. Condensate collection tray: made from plastic with an L -shaped plastic fitted on the inner casing; the tray is insulated with polyolefin (PO) foam (class M1). The outside diameter of the condensate discharge pipe is 15 mm. 2

3 Dimensions, Weight, Water content Coil connections on the left Vertical Installation D F Ø 15 ext D 12 E* * 153 * Supply frame dimension = E x 119 mm Auxiliary condensate tray (optional) orizontal Installation D * E* Ø 15 ext. 1 F 10 * Supply frame dimension = E x 119 mm Auxiliary condensate tray (optional) 3

4 Dimensions, Weight, Water content Coil connections 3 or row coils eating additional coil (1 or 2 rows) O W ATER OUTLET S W ATER OUTLET 37 N U 321 U M R 230 Ø 15 ext. Ø 1/2" F W ATER INLET P 230 Ø 15 ext. Ø 1/2" F W ATER INLET MODEL D E F M N O P R S U Dimension (mm) Weight (kg) ROWS MODEL ,1 20,3 21,0 20,1 21,3 WEIT WIT PACKAIN 26,1 27,6 28,5 27, 28,9 30, 32,2 33,3 31,9 33,7,7,0,5,8 17,3 18,5 19,2 18,3 19,5 WEIT WITOUT PACKAIN ,5 25,0 25,9 2,8 26,3 27,3 29,1 30,2 28,8 30,6,3,6,1, Water content (litres) ROWS MODEL ,9 1,3 0,3 0,6 1,6 2,2 0,5 1,0 1,9 2,8 0,6 1,2 3,2,2 0,9

5 2 pipe units. The following standard rating conditions are used: Units with 3 and row coil COOLIN (summer mode) Entering air temperature: +27 C d.b. +19 C w.b. Water temperature: + 7 C E.W.T. +12 C L.W.T. EATIN (winter mode) Entering air temperature: +20 C Entering water temperature: + C Water flow rate as for the cooling conditions MODEL CRSO 13 CRSO 23 CRSO 33 CRSO Speed (E) Air flow (E) Available pressure (E) Cooling total emission (E) Cooling sensible emission (E) eating (E) Dp Cooling (E) Dp eating (E) Fan (E) Sound power outlet (E) Sound power inlet + radiated (E) Sound pressure outlet ( Sound pressure inlet + radiated ( Plenum code (E) m 3 /h Pa W ,58 1,1 1,91 9,0 6, ,81 1,31 2,22 11,5 9, ,93 1,1 2,39 12,9 10, ,9 2,17 3, 10,6 8, ,19 2,37 3,92 12,3 9, , 2,,25 13,9 11, 97 7, 3,36 5,63 11, 9, ,92 3,80 6,36 13,7 11, ,20,05 6,79 15,1 11, ,95,39 7,29 8,9 6, ,87 5,16 8,62 11,5 9, , 5,62 9,1 13,1 10, MODEL CRSO 1 CRSO 2 CRSO 3 CRSO Speed (E) Air flow (E) Available pressure (E) Cooling total emission (E) Cooling sensible emission (E) eating (E) Dp Cooling (E) Dp eating (E) Fan (E) Sound power outlet (E) Sound power inlet + radiated (E) Sound pressure outlet ( Sound pressure inlet + radiated ( Plenum code (E) m 3 /h Pa W ,7 1,23 2,06 5,, ,01 1, 2,1 7,0 5, ,15 1, 2, 7,9 6, 1 0 3,27 2,32 3,90 18,1 1, , 2,,30 21,2 17, ,85 2,77,69 2,3 20,1 97 7,80 3, 6,00 9,7 8, ,36 3,99 6,83 11,9 9, ,68,25 7,31 13,2 10, ,,68 7,85 11,8 11, ,59 5, 9,39 15,6 13, ,22 6,05 10,30 18,0 17, (E) = Eurovent certified performance. ( = The sound pressure levels are 9 lower than the sound power levels and apply to the reverberant field of a 100 m3 room and a reverberation time of 0.5 sec. 5

6 pipe units. The following standard rating conditions are used: Units with 1 row additional coil COOLIN (summer mode) Entering air temperature: +27 C d.b. +19 C w.b. Water temperature: + 7 C E.W.T. +12 C L.W.T. EATIN (winter mode) Entering air temperature: +20 C Water temperature: +70 C E.W.T. + C L.W.T. MODEL CRSO 13+1 CRSO 23+1 CRSO 33+1 CRSO +1 Speed (E) Air flow (E) Available pressure (E) Cooling total emission (E) Cooling sensible emission (E) eating (E) Dp Cooling (E) Dp eating (E) Fan (E) Sound power outlet (E) Sound power inlet + radiated (E) Sound pressure outlet ( Sound pressure inlet + radiated ( Plenum code (E) m 3 /h Pa W ,58 1,1 1,66 9,0 5, ,81 1,31 1,87 11,5 6, ,93 1,1 1,98 12,9 7, ,9 2,17 2,85 11,2 3, ,19 2,37 3,08 13,0, , 2, 3,28 1,7,8 97 7, 3,36,1 11, 6, ,92 3,80, 13,7 7, ,20,05,82 15,1 8, ,95,39 5, 8,9 13, ,87 5,16 6,33 11,5 17, , 5,62 6,79 13,1 19, (E) = Eurovent certified performance. ( = The sound pressure levels are 9 lower than the sound power levels and apply to the reverberant field of a 100 m3 room and a reverberation time of 0.5 sec. 6

7 MO-3V CR-T TMO-T TMO-T-AU TMO-DI TMO-3-SV2 T2T Wall electronic controls 3 speed control Standard models 3 speed control with electronic thermostat and manual summer/winter switch 3 speed control with electronic thermostat and summer/winter switch Automatic speed control with electronic thermostat and summer/winter switch Automatic speed control with electronic thermostat, summer/winter switch and liquid crystal display Automatic speed control with electronic thermostat to be mounted in the DIN 3 box (for units with valves) Electromechanical thermostat with summer/winter switch (only for 2 pipe units) N.B.: if the electric heater is mounted, use the "IAQ" controls. Free-Com FreeSabiana wireless control system Remote control to be used with electronic boards described at Page 229 Electronic controls for MB boards MB-M MB-S T-MB RS-RT03 RT03 RS PSM-DI MB electronic board fitted on the unit MB electronic board supplied with separate packaging Wall control (to be used with MB board only) RT03 infra-red remote control with receiver supplied with separate packaging (to be used with MB board only) RT03 infra-red remote control supplied with separate packaging (to be used with MB board only) Receiver for RT03 infra-red remote control supplied with separate packaging (to be used with MB board only) Multifunction control (to be used with MB board only) Sabianet management system for a network of fan coils Sabianet ROUTER-S SIOS Sabianet (to be used with MB board only) Router for Sabianet Relay output board for Sabianet 7

8 Wall Electronic controls RT03 infra-red remote control 8

9 The descriptions and illustrations provided in this publication are not binding: Sabiana reserves the right, whilst maintaining the essential characteristics of the types described and illustrated, to make, at any time, without the requirement to promptly update this piece of literature, any changes that it considers useful for the purpose of improvement or for any other manufacturing or commercial requirements. Sabiana s.p.a. via Piave, Corbetta Milano Italy phone r.a. / / fax / info@sabiana.it CRSO-LT-EN