Clad &Wood Windows and Doors

Transcription

1 M Clad &Wood Windows and Doors O N AW RI NCD OHW S A N D D O O R S

2 CLL DOUB HUNG EA D AT OW S WP IN DIO DOORS Double Hung Window Features Clad & Wood Details 49/6 Jamb with option for factory applied wider Extension Jambs. Clad Brickmould. Sash clad of extra thick.04 Roll Formed Aluminum. Poly Foam Air-Sealed Adjustable and optional E-Z tilt Balances, DP50 rated White (White or Cream units), Beige (Sand, Bronze or Green units). /4 Clear Monarch High Test Insulated. Other glazing options: Low-E, Bronze, Gray and Obscure. All available in Tempered. Frame clad of.050 Extruded Aluminum with Low Maintenance Electrostatic Applied Polyester Enamel available in White, Cream, Sand, Bronze or Green. Butyl Glazing Sealant for permanent life and maximum weatherability. Graceful Interior Sash Profile accepts Monarch s unique Full Surround Compression. Weatherstripped Top Sash, Bottom Sash and Check Rails. Classic Mortise and Tenon Corner Joint. Clear Pine Interiors. Stout 7/6 thick Sash Rails and Stiles on Vent Double Hungs. Stout 7/6 thick Sash on Picture Windows. 49/6 Jamb with option for factory applied wider Extension Jambs. Lift Grooves on both Top and Bottom Sash Rails. Sill Trim. Stout 7/6 thick Sash Rails and Stiles on Vent Double Hungs. Stout 7/6 thick Sash on Picture Windows. Clad Sill and Sill Nosing. Clad Sill Cap, automatically applied with Brickmould option. PVC Brickmould (Wood Brickmould is standard). Also available with other Exterior Trims. Butyl Glazing Sealant for permanent life and maximum weatherability. Poly Foam air-sealed Adjustable and optional E-Z tilt Balances, DP50 rated White is standard, Beige optional. Graceful Interior Sash Profile accepts Monarch s unique Full Surround Compression. Classic Mortise and Tenon Corner Joint. Clear Pine Interiors. treated and primed Wood Sill and Sill Nosing. Lift Grooves on both Top and Bottom Sash Rails. Reversible Sill Trim. Thermally broken clad sill for improved energy performance. /4 Clear Monarch High Test Insulated. Other glazing options: Low-E, Bronze, Gray and Obscure. All available in Tempered. Monarch s Double Hung windows feature sash that can easily be tilted, or completely removed, to make cleaning a breeze. Even sash replacement can be achieved in mere minutes by utilizing this no-fuss process. Weatherstripped Top Sash, Bottom Sash and Check Rails. Sash Tilt

3 Double Hung Window Features Clad Details DOUBLE HUNG PATIO W INDOWS D OORS Clad Trim Accessories /6 7 /8 4 Head Drip Fin Use at the head of each clad window or door for additional protection against water leakage Frame Expanders Use for filling the space between the new window and the existing wall to give you a totally clad exterior /4 Expansion Mullion Use for a wide mullion or stud pocket by inserting a frame expander into each side. Will cover an area from /4 in width up to 8 Horizontal Drip Mullion Use in combination with corrugated staples at the interior to connect Clad Circle Top or to Clad Outswing Doors Mullion Cover Use in combination with corrugated staples at the interior to connect clad windows and doors together

4 OUBLE HUNG C LAD W INDOWS DOUBLE P ATIO D OORS 4 Double Hung Window Technical Specifications E XTERIOR TRIM Exterior Wood Trim is offered in various profiles WM80 Brickmould which is standard or optional 5/4x4, x4 and x6 which can be used with or without wood Backband trim. PVC (no rot) Brickmould, along with 5/4x4, x4, x6 and x4bb trim is also available. Wood x4 Wood 5/4x4 Wood x6 Wood WM80 Brickmould ( /8" x ") PVC x4bb ( 9 /6" x 4 /" - /6" on BB) Wood Backband ( /" x ") S ILLS AND SILL ILL TRIM Wood units come standard with treated and primed wood sill and nosing (exterior). Clad sills are standard on clad units and available on wood units. Sill Trim (interior) is available in and Reversible trim on wood or clad sills. Reversible sill trim must be used when the jamb thickness is greater than 4-9/6 and for Grade 40 applications (Stool applications cannot be used with a reversible sill trim). PVC sills /no stop is available on wood DH s with standard nosing or large nosing. Sill Trim Reversible Sill Trim Both are shown with clad sill Large Sill Nosing Exterior Clad Brickmould is an addition that gives clad units the wide profile that is common on most wood windows and doors, adding -9/6 to the outside frame width and -5/6 to the outside frame height of a Double Hung unit. This optional feature is available in all clad colors and on all clad units, (excluding oval units and bay units). Clad Primed Sill Clad Sill Cap Caulked Joint (If purchased by the piece, the installer must caulk this joint) Clad Primed Sill Nosing Shipping Skid S CREENS Screens are optional on all vent window units. They consist of a heavy, white aluminum frame (/4 x 7/6.04 rollformed) with charcoal fiberglass mesh. Spring loaded plungers at the top make removal easy. Half screens are available for radius vent units. Specify screen and color desired at the time of order. Wood units come standard with White screens. On clad units, the color is matched to the exterior cladding finish. Nail Fin Clad Brickmould Jamb Clad Exterior

5 Technical Specifications GRILLES FINISH Wood exteriors are water-repellent, insect toxic treated and primed. Clad exteriors encase the wood exterior frame in.050 extruded aluminum clad and the wood exterior sash in roll-formed.04 aluminum clad, all with an applied low maintenance electrostatic polyester enamel to resist scratches and make cosmetic upkeep easier than ever imagined. Clad finish is available in White, Cream, Sand, Bronze or Green. White Cream Sand Bronze s are available and optional on all window units. Monarch offers /4 or -/8 Wood KD or Full Surround s in addition to PDL (Permanent Divided Lite with mill finish (standard) or Bronze finish (optional GBG), SDL Full (Simulated Divided Lite, No Surround GBG) available /4, -/8, and 5/8 or 7/8 GBG (s Between the ) grille configurations. Our PDL system is the smart alternative to the old True Divided Lite system KD GRILLES Wood KD and FS 7 /6" 7 /6" Wood s available in /4" and /8" grille bar widths The unique profile of Monarch s Full Surround fastens snuggly into window sash with concealed compression clips, yet can be easily removed for cleaning. Monarch s Double Hung Window units come standard with high quality locks White with White balances (standard on White & Cream Clad and Wood units), Oil Rubbed Bronze with Beige balances (standard on Sand, Bronze and Green Clad units, also available on wood units). JAMBS Wood jambs are water-repellent and insect toxic treated. The standard basic unit jamb width is 4-9/6. Pine extension jambs are available for wall thicknesses from 4-9/6 to. the initial cost is less, and better energy performance guarantees years of lower energy bills. Exterior grille bars will match the window finish as specified. Interior bars are of Clear Ponderosa Pine. Exterior bars are primed aluminum for wood units or White, Cream, Sand, Bronze or Green aluminum finish for clad units. GBG spacer bars are also available in all seven (7) finish colors. Monarch is expanding our GBG option by offering a two-tone GBG (Bronze Exterior/White Interior, Sand Exterior/White Interior), available in 5/8 and 7/8. Design options are limitless with numerous standard lite layout options as well as the availablity of optional custom lite layouts. GBG Aluminum Bar s-betweenthe- available in /8" and 7/8" grille bar widths 5 PDL (see below for details) / 4" Monarch windows are standard with high test /4 Clear, insulated glass. Glazing options include Clear, Low E, Bronze, Gray or Obscure. All available in annealed or tempered glass. Attached Wood Interior SDL / 4" Attached Aluminum Exterior / 4" Attached Wood Interior Aluminum Bar Attached Aluminum Exterior NAIL FIN Clad units will utilize fold-over nail fins to protect the clad finish from scratches and abrasions during shipping. Nail fins then lock into place for easy installation. available in /4", -/8" and grille bar widths Outside Low-Emissivity Coating 4 Inside Clear Bronze Obscure Gray Low Conductivity Spacer Low-E Permanent Divided Lite Grid System available in /4" and /8" grille bar widths Simulated Divided Lite Grid System Surface Attached Aluminum Exterior Attached Wood Interior /4" Wide Profile / 8" KD push-pins for secure installation into window unit. HARDWARE /4" Green Printing limitations make accurate color duplication impossible. For exact color matching, please refer to actual color samples at your Monarch dealer. GLAZING 5 (See right for details) OL UA BD L E PH NG DC A TU IO WD IN OD OO RW S S Double Hung Window

6 DOUBLE HUNG WINDOWS PATIO DOORS 6 Clad & Wood Double Hung Window Units R.O. Out. Frame Modular /6 9 7 / /6 7 / /6 5 7 / /6 9 7 / /6 7 / /6 5 7 / /6 9 7 / /6 5 /8 4 7 / /6 5 5 / / /6 4 9 / / /6 4 5 / /8 4 4 /6 4 / / ** /6 5 9 / / Even Style /6 5 9 / / Cottage Style = Egress Size Units Check Local Codes for exact requirements ** = 046 meets Egress only when used with standard sill trim. Colonial All grilles shown are optional

7 Clad & Wood Double Hung Window Units R.O. Out. Frame Modular /6 9 7 / /6 7 / /6 5 7 / /6 9 7 / /6 7 / /6 5 7 / /6 9 7 / PATIO DOUBLE HUNG DOORS WINDOWS 6 6 /6 6 5 / / /6 7 9 / / /6 7 /8 7 7 / /6 6 9 / / = Egress Size Units Check Local Codes for exact requirements Colonial All grilles shown are optional

8 DOUBLE HUNG PATIO WINDOWS DOORS 8 Clad & Wood Double Hung Picture Window Units R.O. Out. Frame Modular 4 5 /6 7 /6 0 9 / /6 9 7 /6 8 7 / 4 5 /6 7 /6 0 / /6 5 7 /6 4 5 / /6 9 7 /6 8 9 / 4 5 /6 7 /6 0 / /6 4 7 / / /6 5 7 / / /6 6 7 / / 6 /6 5 /8 4 7 /8 7 / /6 5 5 / / /8 4 0 /6 4 9 / / /8 4 6 /6 4 5 / / /8 4 /6 4 / / / /6 5 9 / / /8 Even Style /6 5 9 / / /8 Cottage Style /6 6 5 / / / ROUGH OPENINGS OF ASSEMBLED UNITS SASH /8 67 /8 75 /8 4 /8 5 / / / / /6 5 /6 8 /8 4 5 /6 Colonial All grilles shown are optional

9 Clad & Wood Double Hung Sliding Window Units R.O. Out. Frame Modular 5 7 /8 /6 5 / /8 /6 5 / /8 4 /6 4 5 / /8 4 7 / / /8 5 /6 5 5 / /8 5 7 / / /8 6 /6 6 5 / PATIO DOUBLE DOORS HUNG WINDOWS 0 /8 / /8 7 / /8 / 8 = Egress Size Units, as long as window sill is less than 4 from floor Check Local Codes for exact requirements 4 0 /8 / /8 7 / /8 / 0 4 /8 / = Egress Size Units as long as window sill is less than 4 from floor - Check Local Codes for exact requirements Biege Vinyl Head & Sill Tracks Smallest size /6 x /4 modular opening Largest size 6/ x 5/0 modular opening Colonial All grilles shown are optional

10 DOUBLE HUNG TRANSOMS PATIO DOORS 0 for double hung windows Double Hung CONTINUOUS TRANSOMS FOR SINGLE, TWIN & TRIPLE DOUBLE HUNG UNITS Width Width Lite Pattern /6 7 /6 8 / x /6 9 7 /6 6 / x /6 7 /6 0 / x /6 5 7 /6 4 / x /6 9 7 /6 8 / x /6 7 /6 / x /6 5 7 /6 6 / 4x /6 4 7 /6 44 / 5x /6 5 7 /6 56 / 5x /6 6 7 /6 68 / 7x Width Width Lite Pattern -8 9 / 7 7 /6 6 5 /6 7 5 /6 4x / 4 7 /6 4 5 / /6 4x -4 5 / 4 7 / /6 5 5 /6 6x / / /6 6 5 /6 6x / 6 7 /6 6 5 / /6 6x / /6 59 / 6x / /6 7 / 6x / /6 8 / 9x HEIGHT Height Height -0 - /8 5 /6 7 /6 8 / COMBINATION R.O. HEIGHTS Stand Alone w/ 0 w/ 5 /8 5 /6 7 /6 0 / /6 4 6 /6 Combination -0 /4 5 /6 0 /6 8 / *Wood Stand Alone Heights add -/8 for wood subsill or -/4 for PVC subsill - 4 /4 5 /6 /6 0 / 5 0 /6 5 4 /6 5 /6 5 6 /6 *Combination Heights are the same for clad and wood /6 5 0 /6 6 4 /6 6 8 /6 6 6 /6 6 0 / /6 7 8 /6 7 6 /6 7 0 /6 x Colonial x Colonial 4x Colonial 5x Colonial 6x Colonial 7x Colonial 9x Colonial Custom units with glass height greater than will have horizontal bars (optional). Monarch Double Hung Window unit with continuous transoms (two continuous Double Hung transoms). Monarch Double Hung Window unit with composite transoms (two composites, each with two Double Hung transoms). Combination

11 for double hung windows PATIO DOUBLE HUNG DOORS TRANSOMS CIRCLE TOP TRANSOMS* Width Height Width Height Width Height Width Height CONT. Width Height Width Height Width Height Width Height /6 9 5 /6 0 7 / 9 7 /6 0 0 / 9 5 /8 8 / / / 4 7 /6 5 /6 4 7 /8 7 /6 49 / / /6 5 /6 7 / 7 /6 0 / 5 /8 0 / -4 5 / 7 / 4 7 /6 5 5 / /8 5 7 /6 57 / 7 / /6 5 5 /6 7 / 5 7 /6 / 7 5 /8 / / / /6 9 5 / /8 9 7 /6 65 / / /6 9 5 /6 5 7 / 9 7 /6 4 / 5 /8 4 / / / 6 7 /6 5 /6 6 7 /8 7 /6 7 / 5 / /6 5 /6 7 7 / 7 /6 6 / 5 / 6 / / /6 / /6 7 / 74 / 6 5 / 7 ** Wood height listed. For Clad height subtract / /6 5 5 /6 9 7 / 5 7 /6 8 / 9 / 8 / /6 9 5 /6 7 / 9 7 /6 0 / 4 / 0 / # - 5 Lite #5 - Lite /6 4 5 /6 7 / 4 7 /6 0 / 47 / / 4 # - 7 Lite #6-9 Lite /6 5 5 /6 7 7 / 5 7 /6 6 / 59 / 8 / 5 # - 6 Lite /6 6 5 /6 7 / 6 7 /6 0 / 7 / 4 / 6 #7-4 Lite #4-9 Lite #9 - Cathedral Circle Top QUARTER CIRCLE TRANSOMS* Width Height Width Height Width Height Width Height / 5 /6 5 /6 7 /6 7 /6 /6 /6 8 7 / 5 5 /6 5 5 /6 5 7 /6 5 7 /6 7 /6 7 /6 0 / 9 5 /6 9 5 /6 9 7 /6 9 7 /6 /6 /6 4 / 5 /6 5 /6 7 /6 7 /6 5 /6 5 /6 8 7 / 5 5 /6 5 5 /6 5 7 /6 5 7 /6 9 /6 9 / / 9 5 /6 9 5 /6 9 7 /6 9 7 /6 4 /6 4 /6 4 ** Wood height listed. For Clad height subtract / / 4 5 /6 4 5 /6 4 7 /6 4 7 /6 47 /6 47 / / 5 5 /6 5 5 /6 5 7 /6 5 7 /6 59 /6 59 / / 6 5 /6 6 5 /6 6 7 /6 6 7 /6 7 /6 7 /6 6 Left Hand Right Hand Quarter Circle # - 4 Lite # - 4 Lite # - 7 Lite #4 - Lite #5-7 Lite #6-5 Lite #9 - Cathedral Combination Cathedral s The number of bars wide depends on the overall unit width The grille bars are evenly spaced and will not line up with the window below * Small radius GBG s must be manufactured with 5 /8 GBG stock even though remaining bars may be 7 /8 Monarch Picture Window, two Double Hung Window units, Double Hung Transom, and four Quarter Circle. Monarch Double Hung Window unit and Circle Top Transom. Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

12 DOUBLE HUNG TRANSOMS PATIO DOORS for double hung windows SEGMENT TRANSOMS Segment Width Height R.O. Width R.O. Height Width Height Leg Height Width Height CONT. Width Height Width Height Width Height Leg Height Width Height /6 4 9 /6 7 /6 4 /6 /4 4 5 / / 0 /4 4 7 /6 8 /6 4 5 /6 8 5 /6 49 /4 8 9 / /6 5 5 /6 4 5 /8 5 7 /6 4 /8 7 /4 4 /8-4 5 / 0 5 /6 4 7 /6 9 / / /4 9 / /6 9 5 /6 5 5 /8 9 7 /6 5 /8 /4 5 / / 9 / /6 0 / /6 5 /8 65 /4 7 / /4 5 /6 5 5 /6 7 /6 4 /6 5 /4 5 / / /4 6 7 /6 /6 6 5 /6 /6 7 /4 9 / /8 5 5 /6 6 /6 5 7 /6 5 /6 9 /4 5 5 / / /6 0 / /6 5 /8 74 /6 7 / /6 9 5 /6 7 / 9 7 /6 7 4 /6 7 / /6 4 5 /6 8 /8 4 7 /6 7 7 /8 47 /4 8 /8 The leg height of a Segment Transom refers to the side measurement as shown above /4 5 5 /6 0 5 /6 5 7 /6 9 /6 59 /4 0 / /6 6 5 /6 /4 6 7 /6 0 /4 7 /4 The outside frame height of a Segment Transom refers to the measurement at the highest point as shown above. # - 5 Lite # - Lite # - 7 Lite #9 - Cathedral ** Wood height listed. For Clad height subtract /6. LEFT HAND / RIGHT HAND SEGMENT TRANSOMS Left Hand Right Hand Segment Width Height R.O. Width R.O. Height Width Height Leg Height Width Height CONT. Width Height Width Height Width Height Leg Height Width Height /6 4 9 /6 7 /6 4 /6 /4 4 5 / / 0 /4 4 7 /6 8 /6 4 7 /8 8 5 /6 49 /4 8 9 / /6 5 5 /6 4 5 /8 5 7 /6 4 /8 7 /4 4 /8-4 5 / 0 5 /6 4 7 /6 9 / / /4 9 / /6 9 5 /6 5 5 /8 9 7 /6 5 /8 /4 5 / / 9 / /6 0 / /8 5 /8 65 /4 7 / /4 5 /6 5 5 /6 7 /6 4 /6 5 /4 5 / / /4 6 7 /6 /6 6 7 /8 /6 7 /4 9 / /8 5 5 /6 6 /6 5 7 /6 5 /6 9 /4 5 5 / / /6 0 / /6 5 /8 74 /4 7 / /6 9 5 /6 7 / 9 7 /6 7 4 /6 7 / /6 4 5 /6 8 /8 4 7 /6 7 7 /8 47 /4 8 /8 The leg height of a Left/Right Hand Segment Transom refers to the side measurement as shown above /4 5 5 /6 0 5 /6 5 7 /6 9 /6 59 /4 0 / /6 6 5 /6 /4 6 7 /6 0 /4 7 /4 The outside frame height of a Left/ Right Hand Segment Transom refers to the measurement at the highest point as shown above. # - Lite # - 7 Lite # - 4 Lite #9 - Cathedral ** Wood height listed. For Clad height subtract /6. Monarch Double Hung Window Unit with Elliptical Transom. Monarch Picture Window, two Double Hung Window units, Double Hung Transom, and four Quarter Circle. Monarch Quad Double Hung Window Unit with two Double Hung and two Left-Hand/Right-Hand Segment. Combination Cathedral s The number of bars wide depends on the overall unit width The grille bars are evenly spaced and will not line up with the window below Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

13 for double hung windows PATIO DOUBLE HUNG DOORS TRANSOMS ELLIPTICAL TRANSOMS* Width Height Width Height Width Height Width Height CONT. Width Height Width Height Width Heigtht Width Height / 5 5 /6 5 7 /6 / 7 5 /8 / / 5 5 /6 4 7 /6 4 / 4 5 / /6 4 / /6 9 5 /6 / 9 7 /6 5 /8 /4-4 5 / 6 5 /6 4 7 /6 5 / / /6 5 / / 5 /6 7 /6 / 5 5 /8 / / 7 5 / /6 6 / / /6 6 / /6 5 5 /6 / 5 7 /6 9 5 /8 / / 8 5 /6 6 7 /6 7 / 6 5 /6 7 7 /6 7 / / 9 5 / /6 / 4 5 /8 / / / /6 7 / 74 / 7 /4 ** Wood height listed. For Clad height subtract /6. Call customer service on custom height Ellipticals /6 4 5 /6 4 / 4 7 / /8 4 / / 5 5 / /6 5 / 59 5 /8 5 / /6 6 5 /6 7 / 6 7 / /8 7 /4 # - 5 Lite # - Lite # - 7 Lite #9 - Cathedral * Small radius GBG s must be manufactured with 5/8 GBG stock even though remaining bars may be 7/8. Elliptical EYEBROW TRANSOMS* Width Height Width Height Width Height Width Height CONT. Width Height Width Height Width Height Width Height / 5 5 /6 5 7 /6 / 7 / / / 5 5 /6 4 7 /6 4 / 4 5 /6 4 4 / /6 9 5 /6 / 9 7 /6 5 /6 /4-4 5 / 6 5 /6 4 7 /6 5 / / /4 5 / / 5 /6 7 /6 / 5 /8 / / 7 5 / /6 6 / / /6 6 / /6 5 5 /6 / 5 7 /6 8 5 /6 / / 8 5 /6 6 7 /6 7 / 6 5 /6 7 7 /8 7 / / 9 5 / /6 / 4 5 /8 / / / /6 7 / 7 /6 7 /4 ** Wood height listed. For Clad height subtract /6. Call customer service on custom height Eyebrows /6 4 5 /6 4 / 4 7 / /6 4 / / 5 5 / /6 5 / 58 5 /6 5 / /6 6 5 /6 7 / 6 7 / /4 # - 5 Lite # - Lite # - 7 Lite #9 - Cathedral * Small radius GBG s must be manufactured with 5/8 GBG stock even though remaining bars may be 7/8. Eyebrow Cathedral s The number of bars wide depends on the overall unit width The grille bars are evenly spaced and will not line up with the window below. Combination Monarch Double Hung Window Unit with Elliptical Transom. Monarch Quad Double Hung Window Unit with two Double Hung and two Left-Hand/Right-Hand Segment. Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

14 DOUBLE HUNG WINDOWS PATIO DOORS 4 Clad & Wood Fixed Picture Units All units are Direct Set Circle Top Small radius GBG s must be manufactured with 5 /8 GBG stock even though remaining bars may be 7 /8. CIRCLE TOP PICTURE WINDOWS / /4 HEIGHT / / 5 / / 7 / / / / / 6 / / / 65 /4 4 / 5 / / 47 / / 59 / / / 7 /4 7 5 / 7 7 / 8 /4 Measurements are units with standard stop flat sills ** Wood height listed. For Clad Width & Height subtract / / 6 /4 8 5 / 8 8 / 95 / / 7 / Sample Matrix All units come standard with annealed glass except as noted below: + = We recommend that units over 0 sq. ft. (4080, 5056, 506, 5070, 5080, 556, 56, 570, 605, 6056, 606) be glazed with tempered glass. ++ = Units over 40 sq. ft. (580, 6070) are available with tempered glass only. ELLIPTICAL PICTURE WINDOWS Sample Matrix Elliptical GBG & PDL grilles are not available in or Cathedral /6 4 4 / 47 /4 5 4 /6 5 5 / 59 / HEIGHT 5 6 / / 6 /4 Measurements are units with standard stop flat sills ** Wood height listed. For Clad Width & Height subtract / / / 5 / / / 6 / PALLADIAN WINDOW UNITS Palladian Palladian Window Shoulder Heights are the same for clad and wood. Unit Height references overall height of the Circle Top Picture Window /8 5 5 / /8 /4 5 /4 /4 HEIGHT Shoulder (OF) / 4 / 8 /4 7 /4 Sample Matrix / 4 0 / 4 /4 45 / / / 0 /4 5 / / / 8 /4 6 / / 6 6 / 4 6 /4 7 / / / 4 8 /4 7 /4 Measurements are units with standard stop flat sills ** Wood height listed. For Clad Width & Height subtract / / / 6 /4 9 /4 * All grilles shown are optional Colonial Cathedral Colonial Cathedral Colonial Cathedral Small radius GBG s must be manufactured with 5/8 GBG stock even though remaining bars may be 7/8 Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

15 Clad & Wood Fixed Picture Units & Palladian Window Units SEGMENT HEAD PICTURE WINDOWS Radius Rise /6 4 4 / 47 /4 6 7 /8 HEIGHT Shoulder Height (OSF) Radius Rise 5 4 /6 5 5 / 59 /4 8 / /6 6 6 / 7 /4 9 / Shoulder height + radius rise / / / / / /8 Listed by width, see above Shoulder height + radius rise + / Shoulder height + radius rise Shoulder height + radius rise - /4 Measurements are units with standard stop flat sills ** Wood height listed. For Clad Width & Height subtract /6. All units are Direct Set * * * ** When mulled to double hungs, segment picture windows require a sloped sill. Specify when ordering. All units come with annealed glass, except 606: * = We recommend that units over 0 sq. ft. (506, 605, 6056) be glazed with Tempered. ** = 606 available with Tempered only. 5 PATIO DOUBLE HUNG DOORS WINDOWS Segment Head Top of Double Hung frame lines up with shoulder on segment units. Shoulder height does not include subsill or sill nosing. Trim accessories may effect and Masonry. L/R SEGMENT HEAD PICTURE WINDOWS Radius Rise / /4 7 5 / / 7 /4 8 / / /4 0 5 / / 5 /4 0 / / 47 /4 6 7 / / 59 /4 0 / / 6 /4 0 / / 7 /4 5 / HEIGHT Shoulder Hgt (OSF) Radius Rise Measurements are units with standard stop flat sills ** Wood height listed. For Clad Width & Height subtract / Shoulder height + radius rise / / / / / Listed by width, see above Shoulder height + radius rise + / Shoulder height + radius rise Shoulder height + radius rise - / All grilles shown are optional Old English Colonial Cathedral Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

16 DOUBLE HUNG PATIO WINDOWS DOORS 6 Clad & Wood Bay Windows 0 BAY WINDOWS Clad Out. BM Wood Out. BM Projection Ctr 7 0 / /4 5 /6 6 45½ Ctr 8 0 / /4 5 /6 6 57½ Ctr 9 8 / /4 5 /6 6 69½ Ctr /6 8 5 /6 7 /6 5 /6 45½ Ctr /6 9 5 /6 8 /6 5 /6 57½ Ctr /6 0 5 /6 9 /6 5 /6 69½ Ctr 9 0 / /8 8 6 /8 5 5 /6 45½ Ctr 0 0 / /8 9 6 /8 5 5 /6 57½ Ctr 0 / /8 0 6 /8 5 5 /6 69½ 45 BAY WINDOWS Clad Out. BM Wood Out. BM Projection Ctr /6 7 7 / /6 6 /4 6 45½ Ctr /6 8 7 / /6 6 /4 6 57½ Ctr /6 9 7 / /6 6 /4 6 69½ Ctr 7 /4 7 7 /8 7 /8 9 9 /6 45½ Ctr 8 /4 8 7 /8 8 /8 9 9 /6 57½ Ctr 9 /4 9 7 /8 9 /8 9 9 /6 69½ Ctr /8 8 0 /4 7 8 /4 0 7 /6 45½ Ctr /8 9 0 /4 8 8 /4 0 7 /6 57½ Ctr /8 0 0 /4 9 8 /4 0 7 /6 69½ 0 & 45 BAY WINDOWS HEIGHT Clad Out. BM Wood Out. BM / /8 4 0 /8 5 6 / /8 5 6 /8 6 6 / /8 6 6 /8 See page 6-8 for Venting & Picture Window Heights For other unit heights: Bay R.O. = Double Hung Vent R.O. Height + / Projection Face of sheathing to face of window Projection Face of sheathing to face of window 4-0 Center Sash 5-0 Center Sash 6-0 Center Sash Colonial Bay windows must be supported for proper operation of operable units Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

17 Clad & Wood Circle Top & Arch Top Single Hung Units CIRCLE TOP SINGLE HUNG & WOOD DOUBLE HUNG UNITS* /6 7 / /6 5 7 / /6 9 7 / /6 7 /6 HEIGHT /6 4 / /8 4 0 /6 4 9 / / /6 5 5 / /8 5 0 /6 5 9 / /8 6 6 /6 6 5 / /8 0 Sample Matrix DOUBLE PATIO HUNG WINDOWS DOORS GLASS Clad Top Sash Width 0 / 4 / 0 / Wood Top Sash Width Bottom Sash Width** Clad Top Sash Height Wood Top Sash Height 4 5 /8 5 5 /8 4 7 /8 5 7 /8 8 5 /8 8 7 /8 Bottom Sash Height*** 5 7 /6 4 7 /6 9 7 /6 GLASS CONT Clad Top Sash Width 0 / 4 / 8 / Wood Top Sash Width Bottom Sash Width** Clad Top Sash Height Wood Top Sash Height 4 5 /8 4 7 /8 5 5 /8 6 5 /8 5 7 /8 6 7 /8 Bottom Sash Height*** 5 7 /6 4 7 /6 7 / / 9 5 /8 9 7 /8 8 7 /6 056 / 7 5 /8 7 7 /8 7 /6 **Bottom sash widths are the same for clad and wood. ***Bottom sash heights are the same for clad and wood / 0 5 /8 0 7 /8 7 7 / / 8 5 /8 8 7 /8 9 7 /6 046 / 5 /8 7 /8 6 7 / / 9 5 /8 9 7 /8 8 7 / / 5 /8 7 /8 7 / / 40 5 / /8 7 7 /6 4 / 5 /8 7 /8 7 /6 / 4 5 /8 4 7 /8 6 7 /6 8 / 4 5 /8 4 7 /8 7 /6 05 / 5 5 /8 5 7 /8 0 7 /6 Units must be shimmed for proper operation. = Egress Size Units Check Local Codes for exact requirements ARCH TOP SINGLE HUNG & WOOD DOUBLE HUNG UNITS / / / /6 HEIGHT /6 4 /6 5 /8 4 /8 4 7 / /8 4 0 /6 4 9 / / /6 5 5 / / /6 5 9 / / /6 6 5 / /8 0 Sample Matrix GLASS GLASS HEIGHT Clad Top Sash Wood Top Sash Bottom Sash 0 / 4 / 8 / / Clad Top Sash Wood Top Sash Bottom Sash / /8 4 7 /8 8 7 / / /8 4 5 ARCH TOP DOUBLE HUNG RADII (BY UNIT ) Outside Head Radius R.O. Radius Radius /8 7 /8 8 /8 /8 7 /8 5 / /8 9 /8 0 /8-0 6 /8 6 7 /8 7 5 /8 *Outside Head Radii and Radii are the same for clad and wood. Units must be shimmed for proper operation. = Egress Size Units Check Local Codes for exact requirements 56 6 All grilles shown are optional *Small radius GBG s must be manufactured with 5 /8 GBG stock even though remaining bars may be 7 /8 Colonial Cathedral Colonial Cathedral Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

18 CLIP PAK 8 Clip-Pak Replacement Sash & Balance System Technical Specifications Are your current single glazed windows old, drafty and causing your heating and cooling bills to be excessive? Monarch s Clip- Pak ak Sash and Balance Replacement System is just what you need to solve that problem. Clip-Pak is the simple, costeffective way to bring your home and windows into the st century by installing Monarch s Insulated with Wood, Clad or Mcell Sash and Tilt Balances. Monarch s Clip-Pak sash are available in standard Double Hung sizes or can be made into custom sizes to meet any requirements that your replacement project may require. (Minimum sash opening size available is 4 x 6, and maximum size is 4 x 7 6.) Wood Replacement Sash are primed, treated and weatherstripped. Wood sash are ready for you to apply an oil-based alkyd primer and two coats of 00% Acrylic Latex (exterior grade) semigloss house and trim enamel. Monarch s Clip-Pak Clad Replacement Sash have a.04 roll-formed aluminum sash clad on the exterior, available in White, Cream, Sand, Bronze or Green. This low maintenance feature eliminates exterior painting of the sash. The interiors of both wood and clad Clip-Pak Replacement Sash are of clear pine and can be stained or painted to match existing decor. Monarch s Mcell is a highly engineered, high endurance material that never rots, warps, cracks, sticks or swells. Block and tackle balances. Interior primed wood trim on perimeter of frame. Glazing options of Clear, Low-E, Bronze, Gray and Obscure offer added energy efficiency to meet today s energy standards. Add to these glazing options a selection from our complete line of grilles which include /4 and -/8 wood, KD and Full Surround s (not available on Mcell), PDL (Permanent Divided Lite), and SDL (Simulated Divided Lite) and 5/8 and 7/8 GBG (s Between the ). Monarch s Tilt Replacement Balances, when installed, offer easy window cleaning of the exterior glass from the inside. Clip- Pak Balances are available in White or Beige (please specify the color when ordering). Locks are available in either White (standard with White balances) or Oil Rubbed Bronze (standard with Beige balances) (Please specify the color when ordering.) Locks are factory installed for your convenience. Clip-Pak Sash and Balance Systems come complete with all parts required and instructions for easy installation. When you want the very best, specify Monarch Windows and Doors. Clip-Pak Balances are available in white and beige. Special sizing are special order - -4 weeks. Please specify color when ordering. Minimum sash opening size available is -4 x -6 and maximum size is -4 x 7-6, or a -8 x 6- screens may not fit with clip pak replacements Width Measurements from Inside Height Measurements from Inside Top To Measure: Center Bottom Width Remove inside stops and measure the inside frame width opening at the top, center and bottom as shown above. If the dimensions are different, use the smallest dimension as your width dimension (see width diagram above left). Height Measure from inside of the head jamb to approximately the center of the sloped sill where the bottom sash touches the sill on the exterior (see diagram above center) measure vertically at each side and in the center as shown in the height diagram (above right). If dimensions are different, use the smallest dimension as your height dimension. Ordering Chart Place the width and height dimensions for each opening on the ordering chart on the back page of this brochure. Also, select the sash type, wood or clad, glass type, sash lock and grille type for your job. To place your order for Monarch Clip-Pak Replacement Sash and Balances, take the information you have collected and place on the ordering chart and give to your Monarch Window Dealer. Height Left Side Center Right Side

19 Clip-Pak Replacement Sash & Balance System and Ordering Chart When ordering your Monarch Clip-Pak Replacement Sash, select one option from each group listed below and place that information on the ordering chart along with the quantity, width and height dimensions for each size required. With the versatility of the Monarch Clip-Pak System, glass and grille options can differ from window to window depending on your particular requirements. Clip-Pak Sash 9 AK LIP PAK CLIP PATIO DOORS Sash Type: A) Wood B) Clad C) Mcell Clad Sash Color: A) White B) Sand C) Cream D) Green E) Bronze Tint: A) Clear I\G B) Low-E I/G C) Bronze I\G D) Gray I\G E) Obscure I\G F) Low-E \ Bronze I/G G) Low-E \ Gray I/G Temp: A) Annealed B) Tempered Balance Color: A) White B) Beige C) White - Mcell Pattern: A) Colonial B) Sash Lock Color: A) Oil Rubbed Bronze B) White C) White - Mcell Type: A) B) C) D) E) F) G) H) I) J) K) /4 /8 /4 /8 5 /8 7 /8 /4 /8 /4 /8 None KD (Knocked Down) - NA Mcell KD (Knocked Down) - NA Mcell Full Surround - NA Mcell Full Surround - NA Mcell GBG ( Between the ) GBG ( Between the ) PDL (Permanent Divided Lite) PDL (Permanent Divided Lite) SDL (Simulated Divided Lite) SDL (Simulated Divided Lite) Color: For GBG, PDL and SDL Only A) Primed - PDL & SDL Wood Sash Only B) White C) Sand D) Cream E) Green F) Bronze G) Bronze Exterior / White Interior H) Sand Exterior / White Interior GBG, PDL & SDL Clad Sash Only & GBG Wood Sash White only on Mcell Sash GBG Only Qty Inside Frame Width Ordering Chart Fill in each blank below with the proper letter that denotes your selection for that item. Inside Frame Height Sash Type Clad Sash Color Tint Temp Sash Lock Color Balance Color Type Pattern Color

20 CASEMENT/AWNING WINDOWS Casement & Awning Features Clad & Wood Details 0 Leaf Weatherstripping on top, left and right sides of Sash. Clad Brickmould. Sash clad of extra thick.04 Roll Formed Aluminum. Graceful Interior Sash Profile accepts Monarch s unique Full Surround Compression s. /4" Clear Monarch High Test Insulated. Other glazing options: Low-E, Bronze, Gray and Obscure. All available in Tempered. Clear Pine Interiors. Classic Mortise and Tenon Corner Joint with Butyl Water Tight Seal. Solid Butyl Glazing Sealant for permanent life and maximum weatherability. Structural 45 Degree Mitered Corner on Clad Unit Frame and reinforced with a Lexan Corner Key with Stainless Steel Screws. Jamb extended to 4 9/6" (wider Extension Jambs available and factory applied). Frame clad of.050 Extruded Aluminum with Low Maintenance Electrostatic Applied Polyester Enamel available in White, Cream, Sand, Bronze or Green. Leaf Weatherstripping on top, left and right sides of Sash. Bulb Weatherstripping around perimeter of Frame. Stout " wide by /" thick Sash. Wood Brickmould. PVC Brickmould and other Exterior Trims also available. Graceful Interior Sash Profile accepts Monarch s unique Full Surround Compression. Butyl Glazing Sealant for permanent life and maximum weatherability. Clear Pine Interiors. /4" Clear Monarch High Test Insulated. Other glazing options: Low-E, Bronze, Gray and Obscure. All available in Tempered. Treated and primed Exterior Wood Frame. Jamb extended to 4 9/6" (wider Extension Jambs available and factory applied). Classic wide by / thick Sash with Mortise and Tenon Corner Joints. Bulb Weatherstripping around perimeter of Frame. Wood Subsill. PVC Subsill also available. CASEMENT HANDING Left Hand Right Hand AWNING HANDING Ventilating sash may be hinged on either side. Casement handing is accomplished by viewing the window from the outside of the building. The casement s hand is determined by the side on which the hinges are mounted. True Awning

21 Casements & Awning Window Technical Specifications C LAD NAIL FIN IN Clad units will utilize fold-over nail fins to protect the clad finish from scratches and abrasions during shipping. Nail fins then lock into place for easy installation. E XTERIOR TRIM Exterior Wood Trim is offered in various profile options WM80 Brickmould which is standard or optional 5/4x4, x4 and x6 which can be used with or without wood Backband trim. PVC (no rot) Brickmould, along with 5/4x4, x4, x6 and x4w/bb trim, is also available. Wood x4 Wood 5/4x4 Wood WM80 Brickmould ( /8" x ") Wood Backband ( /" x ") S CREENS Screens are optional on all vent window units. They consist of a heavy, white aluminum frame (/4 x 7/6.04 roll-formed) with charcoal fiberglass mesh. Spring loaded plungers at the top make removal easy. Half screens are available for radius vent units. Specify screen and color desired at the time of order. Wood units come standard with White screens. On clad units, the color is matched to the exterior cladding finish. Trim Accessories /6 7 /8 4 CASEMENT ASEMENT/A PATIO /AWNING WINDOWS DOORS Frame Expanders Use for filling the space between the new window and the existing wall to give you a totally clad exterior Wood x6 PVC x4bb ( 9 /6" x 4 /" - /6" on BB) Exterior Clad Brickmould is an addition that gives clad units the wide profile that is common on most wood windows and doors, adding -9/6 to the outside frame width and -9/ to the outside frame height of a Casement or awning unit. This feature is available in all clad colors and on all clad units, (excluding oval units and bay units). Nail Fin Jamb Clad Brickmould Radius French Casement French Casement J AMBS Wood jambs are water-repellent and insect toxic treated. The standard basic unit jamb width is -9/6. Pine extension jambs are available for wall thicknesses from -9/6 to. Clad basic jamb is -/6. S ASH Classic wide by -/ thick with mortise and tenon corner joints. Sash are clear pine interior ready for staining or painting. /4 Expansion Mullion Use for a wide mullion or stud pocket by inserting a frame expander into each side. Will cover an area from /4 in width up to 8 Mullion Cover Use in combination with corrugated staples at the interior to connect clad windows and doors together Clad Exterior Head Drip Fin Use at the head of each clad window or door for additional protection against water leakage C ASEMENT HANDING A WNING HANDING Left Hand Right Hand Ventilating sash may be hinged on either side. Casement handing is accomplished by viewing the window from the outside of the building. The casement s hand is determined by the side on which the hinges are mounted. True Awning Horizontal Drip Mullion Use in combination with corrugated staples at the interior to connect Clad Circle Top or to Clad Outswing Doors

22 CASEMENT/AWNING WINDOWS Casement & Awning Window Technical Specifications G RILLES Wood Full Surround 7 /6" /4" FINISH Wood exteriors are water-repellent, insect toxic treated and primed. Clad exteriors encase the wood exterior frame in.050 extruded aluminum clad and the wood exterior sash in roll-formed.04 aluminum clad, all with an applied low maintenance electrostatic polyester enamel to resist scratches and make cosmetic upkeep easier than ever imagined. Clad finish is available in White, Cream, Sand, Bronze or Green. G R I L L E S (See right for details) s are available and optional on all window units. Monarch offers /4 or -/8 Wood KD or Full Surround s in addition to PDL (Permanent Divided Lite), SDL (Simulated Divided Lite) available /4, /8 and, and 5/8 or 7/8 GBG (s Between the Full Surround ) grille configurations. Our PDL system is the smart alternative to the old True Divided Lite system the initial cost is less, and better energy performance guarantees years KD /4" Wide Profile 7 White /6" /8" Wood s available in /4" and /8" grille bar widths GBG Cream Sand Bronze Green KD pushpins for secure installation into window unit. Printing limitations make accurate color duplication impossible. For exact color matching, please refer to actual color samples at your Monarch dealer. Aluminum Bar s-betweenthe- available in /8" and 7/8" grille bar widths 5 The unique profile of Monarch s Full Surround fastens snuggly into window sash with concealed compression clips, yet can be easily removed for cleaning cleaning.. HARDWARE Monarch s Casement and Awning Window units come standard with high quality cam locks Oil Rubbed Bronze is standard with White as an option. The standard hardware is a folding / nesting handle available in Oil Rubbed Bronze or White. In the same tradition of quality, Monarch s Dual-Arm Operator creates smooth, balanced movement with a gentle turn of the handle. Specify hardware and color desired at the time of order. of lower energy bills. Exterior grille bars will match the window finish as specified. Interior bars are of Clear Ponderosa Pine. Exterior bars are primed aluminum for wood units or have a White, Cream, Sand, Bronze or Green aluminum finish for clad units. GBG spacer bars are also available in all five finish colors. Monarch is expanding our GBG option by offering a two-tone GBG (Bronze Exterior/White Interior, Sand Exterior/White Interior). available in 5/8 and 7/8. Design options are limitless with numerous standard lite layout options as well as the availablity of optional custom lite layouts. PDL SDL / 4" Attached Wood Interior Attached Aluminum Exterior Aluminum Bar Permanent Divided Lite Grid System available in /4" and /8" grille bar widths G L A Z I N G (See below for details) Monarch windows are standard with high test /4" Clear, insulated glass assembled with solid butyl glazing sealant for permanent life and maximum weatherability. Glazing options include Clear, Bronze, Gray, Obscure or Low E. All glass available in annealed and tempered glass. Attached Wood Interior / 4" / 4" Attached Aluminum Exterior Attached Wood Interior Attached Aluminum Exterior Simulated Divided Lite Grid System available in /4", -/8" and grille bar widths Outside Surface Tempered glass appears clear Low-Emissivity Coating Inside 4 Clear Bronze Obscure Gray Low Conductivity Spacer Low-E

23 Special Millwork Custom Radius & Non-Radius Units Measuring Specifications Custom Radius Units, Clad or Primed Wood Custom Non-Radius Units, Monarch Spandrel Frame Create magnificent window scapes with Monarch s Custom Shapes. Radius units can be fabricated in both low-maintenance clad extrusion or in composite and can be mulled to standard Monarch windows and doors. The Monarch Clad Spandrel Frame System offers complete window flexibility. Non-radius custom window shapes are fabricated from lineal components of low-maintenance aluminum extrusion attached to a preservativetreated wood base. Glazing options include Monarch s entire glazing line Clear, Low-E, Bronze, Gray and Obscure. Custom windows can be mulled horizontally or vertically to any other Monarch clad window or door product. Octagons S PANDREL CUSTOM R ADIUS U NIT MEASURING GUIDE** CUSTOM NON-RADIUS UNIT MEASURING GUIDE** Ovals Circle Top P.W.W. Segment P.W.W. Elliptical P.W.W. LH Trap RH Trap LH Triangle RH Triangle Rounds LH Extended Segment RH Extended Segment LH Extended Qtr.. Circle RH Extended Qtr.. Circle Half Circle Pyramid LH Chop Trap RH Chop Trap Octagons, Ovals and Rounds are available in some limited standard sizes. Contact your Monarch Dealer for more detailed standard sizing information. LH Segment RH Segment LH Qtr.. Circle RH Qtr. Circle Elliptical Pentoid Chop Pentoid Pentagon Full Circle Oval Hexagon Octagon Extended Octagon Rectangle Eyebrow Segment Head Vertical (Clad) Vertical (Wood) Outside of Frame Outside of Brickmould Special Millwork ** W and H dimensions shown are required measurements when ordering. Always give width dimension first. Always view from the outside. Octagon Round * Round * Oval Wood * Oval Wood * Oval Wood * Available in /4 and /8 wood and /4 SDL grilles only. Center on SDL grilles in oval windows must be a circle rather than an oval. Radius Units All dimensions are engineered calculations. Variations in Unit Width should not exceed /8 of engineered specifications. Brickmould widths may vary up to /4 of engineered calculations. All height specifications may vary as much as /8 to the engineered dimensions. These are considered normal variations for arched head products.

24 CASEMENT WINDOWS 4 Clad & Wood Vent & Fixed Casement Windows Out. Frame 7 / 5 /4 4 /4 7 5 /6 5 /4 4 /4 0 5 /6 0 /6 9 9 /6 0 /8 0 /6 9 9 /6 4 5 /8 4 7 /8 4 / /6 4 7 /8 4 / /6 5 7 /6 5 7 /6 5 9 /4 5 7 /6 5 7 /6 7 /4 7 0 / /6 7 0 / 7 0 WOOD Single /4 0 /8 9 7 /8 0 /6 9 /4 8 / /6 /4 / /6 /4 0 / /6 4 5 /4 4 4 /4 Quad 5 0 /6 4 /4 4 0 /4 Five Wide 6 7 /4 6 6 / / /6 5 5 /4 5 4 /4 6 6 /6 6 5 /4 6 4 /4 7 6 /4 6 0 /8 5 7 / /6 5 /4 5 0 / /4 4 0 /8 7 / /4 4 6 / /8 5 /4 4 /8 7 /8 4 5 /4 5 0 /8 4 7 /8 5 7 /4 5 6 / / WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. Colonial All grilles shown are optional = Egress Size Units Check Local Codes for exact requirements

25 Clad & Wood Vent & Fixed Casement Windows Out. Frame /4 0 /8 9 7 /8 0 /6 9 /4 8 /4 / 9 /4 8 /4 6 5 /6 9 /4 8 / /6 6 /6 5 9 /6 6 8 /8 6 /6 5 9 / /8 5 7 /8 5 / /6 5 7 /8 5 / /6 6 /6 6 /6 6 7 /4 6 /6 6 / /4 8 8 / /6 8 8 / Casement Handing CASEMENT WINDOWS 5 /4 4 /8 7 /8 4 4 /6 /4 / /6 /4 0 / /6 4 5 /4 4 4 /4 Left Hand Right Hand Ventilating sash may be hinged on either side. Casement handing is accomplished by viewing the window from the outside of the building. The casement s hand is determined by the side on which the hinges are mounted. Mull Details 5 0 /6 4 /4 4 0 /4 (Clad) (Wood) 6 6 /6 6 5 /4 6 4 / /6 5 /4 5 0 / /6 5 5 /4 5 4 /4 4 /4 4 0 /8 7 / /4 4 6 / /8 5 /4 5 0 /8 4 7 /8 6 7 /4 6 6 / /8 7 6 /4 6 0 /8 5 7 / /4 5 6 / /8 WOOD WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. = Egress Size Units Check Local Codes for exact requirements All grilles shown are optional Colonial

26 CASEMENT WINDOWS 6 Clad & Wood Vent & Fixed Casement Windows Out. Frame / /4 0 /4 5 /6 /4 0 / /6 4 /6 4 9 /6 4 4 /8 4 /6 4 9 /6 6 5 /8 6 7 /8 6 / /6 6 7 /8 6 / /6 8 /6 8 /6 8 5 /4 8 /6 8 /6 0 6 /4 0 4 / /6 0 4 / 0 4 WOOD Single 0 /6 9 /4 8 /4 4 /6 /4 / /6 /4 0 / /6 4 5 /4 4 4 /4 Quad 5 0 /6 4 /4 4 0 /4 Five Wide 5 6 /6 5 5 /4 5 4 /4 6 7 /4 6 6 / / /6 6 5 /4 6 4 /4 7 6 /4 6 0 /8 5 7 / /6 5 /4 5 0 / /4 4 0 /8 7 / /4 4 6 / /8 5 /4 5 0 /8 4 7 /8 5 7 /4 5 6 / /8 5 /4 4 /8 7 /8 4 /4 0 /8 9 7 / WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. Colonial All grilles shown are optional = Egress Size Units Check Local Codes for exact requirements

27 Clad & Wood Vent & Fixed Casement Windows Out. Frame 7 / 5 /4 4 /4 7 5 /6 5 /4 4 / /6 4 0 / /6 5 0 /8 4 0 / /6 7 5 /8 7 7 /8 7 / /6 7 7 /8 7 / /6 9 7 /6 9 7 /6 9 9 /4 9 7 /6 9 7 /6 /4 0 / 0 9 /6 0 / 0 WOOD 7 Casement Handing CASEMENT PATIO WINDOWS DOORS 0 /6 9 /4 8 /4 4 /6 /4 / /6 /4 0 /4 4 Left Hand Right Hand Ventilating sash may be hinged on either side. Casement handing is accomplished by viewing the window from the outside of the building. The casement s hand is determined by the side on which the hinges are mounted. Mull Details 4 6 /6 4 5 /4 4 4 /4 5 0 /6 4 /4 4 0 /4 (Clad) (Wood) 6 7 /4 6 6 / / /6 6 5 /4 6 4 /4 7 6 /4 6 0 /8 5 7 / /6 5 /4 5 0 / /6 5 5 /4 5 4 /4 5 /4 4 /8 7 /8 4 4 /4 4 0 /8 7 /8 4 5 /4 5 0 /8 4 7 /8 5 7 /4 5 6 / /8 4 7 /4 4 6 / /8 /4 0 /8 9 7 / WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. = Egress Size Units Check Local Codes for exact requirements All grilles shown are optional Colonial

28 CASEMENT WINDOWS 8 Clad & Wood Vent & Fixed Casement Windows Out. Frame /4 0 /8 9 7 /8 0 /6 9 /4 8 /4 / 9 /4 8 /4 /8 9 /4 8 / /6 5 6 / /6 5 8 /8 5 6 / /6 8 5 /8 8 7 /8 8 / /8 8 7 /8 8 /8 5 /6 0 /6 0 /6 5 /8 0 /6 0 /6 0 /4 8 / 8 0 /8 8 / 8 WOOD /4 4 /8 7 /8 4 4 /6 /4 / /4 4 0 /8 7 / /6 /4 0 / /6 4 5 /4 4 4 / /6 4 /4 4 0 / /6 5 5 /4 5 4 / /6 5 /4 5 0 / /6 6 5 /4 6 4 / /4 4 6 / /8 5 /4 5 0 /8 4 7 /8 6 7 /4 6 6 / /8 7 6 /4 6 0 /8 5 7 / /4 5 6 / /8 Single Quad Five Wide WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. Colonial All grilles shown are optional = Egress Size Units Check Local Codes for exact requirements

29 Clad & Wood Vent & Fixed Casement Windows Out. Frame /4 0 /8 9 7 /8 5 /4 4 /8 7 /8 4 4 /4 4 0 /8 7 /8 4 0 /6 9 /4 8 /4 4 /6 /4 / /6 /4 0 /4 4 / /4 0 /4 /8 /4 0 / /6 6 /6 6 9 /6 6 4 /8 6 /6 6 9 /6 9 5 /8 9 7 /8 9 / /8 9 7 /8 9 /8 5 5 /6 /6 /6 5 5 /8 /6 /6 *8- *8- *8- *8-4 *4- *4- *4- *4-4 **4- **4- **4- **4-4 WOOD 4 6 /6 4 5 /4 4 4 /4 **48- **48- **48- ** /6 4 /4 4 0 /4 **54- **54- **54- ** /6 5 5 /4 5 4 /4 5 /4 5 0 /8 4 7 /8 5 7 /4 5 6 / /8 4 7 /4 4 6 / /8 Casement Handing Left Hand 9 Right Hand Ventilating sash may be hinged on either side. Casement handing is accomplished by viewing the window from the outside of the building. The casement s hand is determined by the side on which the hinges are mounted. Mull Details CASEMENT PATIO WINDOWS DOORS (Clad) (Wood) 6 /4 6 0 /8 5 7 / /4 6 6 / /8 7 WOOD 6 0 /6 5 /4 5 0 /4 6 6 /6 6 5 /4 6 4 / **60- **60- **60- **60-4 ***66- ***66- ***66- ***66-4 ***7- ***7- ***7- ***7-4 All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. NO SERIES UNIT WILL MEET EGRESS. * = Units will open 90 but will have permanent support wedges beneath sash from lock stile and in center of sash. ** = Units will have a hole drilled and a screw installed / from the end of the sash operator track closest to the center of the unit. This will limit the opening to about 9-0. These will also have permanent support wedges beneath sash from lock stile and in the center of the sash. *** = 66 and 7 units are not available in venting applications. = Egress Size Units Check Local Codes for exact requirements All grilles shown are optional Colonial

30 CASEMENT ASEMENT/A /AWNING WINDOWS 0 Clad & Wood Casement & Awning Fixed Picture Units Out. Frame /4 0 /8 9 7 /8 5 /4 4 /8 7 /8 4 0 /6 9 /4 8 /4 4 /6 /4 /4 4 * 5 / /4 /4 4 5 /8 /4 /4 4 4 / /4 0 /4 4 4 /8 /4 0 / / 4 5 /4 4 4 /4 4 7 /8 4 5 /4 4 4 /4 5 / 4 /4 4 0 /4 5 /8 4 /4 4 0 /4 5 7 / 5 5 /4 5 4 /4 5 7 /8 5 5 /4 5 4 / Picture Windows set up to vent as Awnings: Units marked with + are Awning Picture Windows with rails running through and stiles butting to rails. Units not marked are Casement Picture Windows with stiles running through and rails butting into stiles. 4 0 /6 /4 0 / /6 4 5 /4 4 4 / Special Picture Windows set up to vent as Awnings: * = Awning Picture windows in this group will have hardware group TA- which includes a sill mounted scissor operator with single jamb locks mounted 6 off sill on each side. Unit includes full screen. ** = Awning Picture windows in this group will have hardware group TA- which includes a sill mounted scissor operator with tandem locks mounted on each jamb. Unit includes full screen. 5 0 /6 4 /4 4 0 /4 WOOD /6 5 5 /4 5 4 /4 4 /4 4 0 /8 7 / /6 6 5 /4 6 4 / /4 4 6 / /8 ** 6 7 /4 6 6 / / /4 5 6 / /8 5 /4 5 0 /8 4 7 /8 6 /4 6 0 /8 5 7 / /6 5 /4 5 0 / WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. Monarch Awning Picture Windows can be mulled in combination with other picture windows or combined with vent units as required. Colonial All grilles shown are optional

31 Clad & Wood Casement & Awning Flanker Combinations / /8 6 8 / / /8 7 4 / / /8 8 0 / / /8 8 6 / /6 9 7 /8 9 /8 CASEMENT ASEMENT/A PATIO /AWNING WINDOWS DOORS WOOD / /8 6 8 / / /8 7 4 / / /8 8 0 / / /8 8 6 /8 9 5 /8 9 7 /8 9 /8 HEIGHT Flanker Combination 4 /6 /4 / /6 /4 0 / /6 4 5 /4 4 4 /4 5 0 /6 4 /4 4 0 /4 5 6 /6 5 5 /4 5 4 /4 6 0 /6 5 /4 5 0 /4 66 WOOD HEIGHT /4 4 /8 7 /8 4 4 /4 4 0 /8 7 / /4 4 6 / /8 5 /4 5 0 /8 4 7 /8 5 7 /4 5 6 / /8 6 /4 6 0 /8 5 7 / Mull Details 4 (Clad) (Wood) All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. = Egress Size Units Check Local Codes for exact requirements All grilles shown are optional Colonial

32 /AWNING CASEMENT WINDOWS PATIO ASEMENT ASEMENT/A DOORS Clad & Wood French Casement Units. Out. Frame /4 0 /8 9 7 /8 0 /6 9 /4 8 /4 /4 9 / 9 9 /6 9 / 9 7 /4 5 / /6 5 / /4 4 / /6 4 / 4 4 /4 4 9 / /6 4 9 / /6 /4 / /6 /4 0 / /6 4 5 /4 4 4 / /6 4 /4 4 0 / /6 5 5 /4 5 4 /4 WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add / /4 6 6 / / /6 6 5 /4 6 4 /4 7 6 /4 6 0 /8 5 7 / /4 5 6 / /8 5 /4 5 0 /8 4 7 /8 4 7 /4 4 6 / /8 4 /4 4 0 /8 7 /8 4 5 /4 4 /8 7 / /6 5 /4 5 0 / WOOD Colonial All grilles shown are optional = Egress Size Units Check Local Codes for exact requirements

33 Clad & Wood Archtop French Casement Units. Out. Frame /4 0 /8 9 7 /8 0 /6 9 /4 8 /4 /4 9 / 9 9 /6 9 / 9 7 /4 5 / /6 5 / /6 /4 / /6 /4 0 / /6 4 5 /4 4 4 / /6 4 /4 4 0 / /6 5 5 /4 5 4 / /6 6 5 /4 6 4 /4 7 4 /4 4 / /6 4 / /4 6 6 / / /4 5 6 / /8 5 /4 5 0 /8 4 7 /8 4 7 /4 4 6 / /8 4 /4 4 0 /8 7 /8 4 5 /4 4 /8 7 /8 4 4 /4 4 9 / /6 4 9 / 4 9 WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. CASEMENT ASEMENT/A PATIO /AWNING WINDOWS DOORS 6 /4 6 0 /8 5 7 / /6 5 /4 5 0 / WOOD All grilles shown are optional Colonial Cathedral

34 /AWNING CASEMENT WINDOWS PATIO DOORS ASEMENT ASEMENT/A 4 Clad & Wood Awning & Awning/Picture Window Combinations Out. Frame /4 0 /8 9 7 /8 6 0 /6 9 /4 8 /4 6 / 9 /4 8 /4 /8 9 /4 8 / /6 5 6 / /6-5 8 /8 5 6 / /6-8 5 /8 8 7 /8 8 / /8 8 7 /8 8 / WOOD Single / /8-4 7 / / - /6 /4 0 / /8 4 5 /8-4 7 /6 4 4 / - 6 /6 5 /4 4 /4 8 7 /8 6 5 /8 6-6 /4 /8 7 /8 7 7 /6 6 5 / Single High 7 /4 6 /8 5 7 /8 High High WOOD All wood outside brickmould dimensions is with a wood subsill - for PVC subsill add /8. Awning Handing True Awning Mull Details (Clad) (Wood) Colonial Colonial styles available in all units