Commercial Swimming Pool Equipment

Transcription

1 Commercial Swimming Pool Equipment Filters Pumps Water Treatment Berlin Filter 64 KIVU Pumps 88 Water Treatment 96 Delta Filters Maxim Pump 89 Commercial Filters 68 BX Pumps 90 Pool Return Inlets Valve Batteries 69 Pool Return Inlets 97 Gauges 69 Strainers Double Action Air Relief 69 Strainers 91 Accessories Praga Filters Flanges 93 Ladders & Rails 98 Oslo Filters Waterlift 99 Rodas Filters Heaters Grating Commercial Blowers 87 HR Commercial Heaters 94 Filter Media 87 Commercial Heat Pumps 95 Fittings Pressure Fittings PVC Valves All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

2 FILTRATION Berlin Filter 750mm mm (Sand bed depth: 0.6m) Fibreglass wound, with a dust-repellent coating, 400mm diameter lid fixed with S/S bolts. Complete with pressure gauge, manual air vent and water purge valves. Maximum operating pressure 250 kpa (2.5 bar). Test pressure: 375 kpa. Ordering: Multiport valve or valve manifold must be ordered separately. Warranty: 2 year full plus 8 year pro rata warranty on filter tank and 1 year full warranty on internal components, gauges and valves. Refer to instructions and website for full warranty details Filter Area m2 Connections Product Code List Price Flows at 50m3 / HR / m2 Filter Area Berlin Filter 750mm - 20,000 LPH 0.50m2 50mm $2, mm Multiport Valve - Side Mount 50mm $ Berlin Filter 900mm - 30,000 LPH 0.60m2 65mm $3, mm Multiport Valve - Side Mount 65mm $ mm Unions to suit 65mm MPV 65mm $52.07 Berlin Filter 1050mm - 43,000 LPH 0.80m2 65mm $4, mm Multiport Valve - Side mount 65mm $ mm Unions to suit 65mm MPV 65mm $52.07 Berlin Filter 1200mm - 56,000 LPH 1.13m2 80mm $5, mm Multiport Valve with connections 80mm $1, D Side Mount Filter D mm H mm M mm N mm Connections 2 65mm 65mm 80mm Flow m3/h Approx. Pool m Sand / Gravel kg / /300 Net weight kg Packing volume m H D N M M N H 64 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

3 FILTRATION Delta 10 Filter (Sand bed depth: 1.0m) The new range of laminated Delta filters has evolved from the PTK filter series. Using new manufacturing processes, which provides multiple product configuration options. A new 30% larger joint reinforces the seal of both parts of the filter with double security: fibreglass laminated on the inside and high tensile strength composite at the outer union of the filter. All connections are on a thicker base, thus improving resistance. Connection to any valve is also made easier thanks to the re-location of the fittings. The height of the lower part of the filter has been increased in order to strengthen the internal nozzle plate support. Maximum operating pressure 250 kpa, Test Pressure 375 kpa. Filtration velocity 40m3/h/m2. Sand bed depth 1m. 0.3mm slotted laterals. 200mm Lateral Manhole. 200mm diameter rapid fitting lid on 800mm Diameter Options: Vinylester resin construction, multiport valve. Nozzle Collector Plate 0.5mm. See below. Ordering: Check stock & leadtime, refer to option codes and prices. Warranty Guide: 2 year full warranty on filter tank and 1 year full warranty on internal components, gauges, valves. Refer to instructions and website for full warranty details Tanks - Lateral Collector Arms - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 10 Filter - 650mm - 13, mm 40mm $3, Delta 10 Filter - 800mm - 20, mm 50mm $4, Delta 10 Filter mm - 28, mm 65mm P.O.A Delta 10 Filter- 1200mm - 45, mm 80mm $9, DN200 Quick Fit Lid for 650mm & 800mm only Tanks - Nozzle Collector Plate - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 10 Filter - 650mm - 13, mm 40mm P.O.A Delta 10 Filter - 800mm - 20, mm 50mm P.O.A Delta 10 Filter mm - 28, mm 65mm P.O.A Delta 10 Filter mm - 45, mm 80mm P.O.A DN400 Bolt Down Fit Lid for 1000mm & 1200mm Options Product Code List Price FX 90 Vinylester construction resistant to Ozone concentrations less than 0.4 ppm Refer to page 50 Multiport Valve 40mm MPV - S/M $ Multiport Valve 50mm MPV - S/M $ Multiport Valve 65mm MPV - S/M $ Union Adaptor 65mm X 2 1/2"" B $52.07 Multiport Valve 80mm with unions $1, Unions between valve and tank included (on codes & 24837) Add 10% of filter price inc Options Replaces the PTK Series Filters All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

4 FILTRATION Delta 12 Filter (Sand bed depth: 1.2m) The Delta 1200 filter is equivalent to the old PTK series 1200 and is available in 650, 800, 1000 and 1200 mm diameters. Maximum operating pressure 250 kpa, Test Pressure 375 kpa. Filtration velocity 30m3/h/m2. Sand bed depth 1.2m. 0.3mm slotted laterals or nozzle plate collector. Sight Glass, 200mm side manhole. 200mm diameter bolt down lid. Lids as per previous page Options: Vinylester resin construction, multiport valve. Nozzle Collector Plate. See below. Ordering: Check stock & leadtime, refer to option codes and prices. Warranty: 2 year full warranty on filter tank and 1 year full warranty on internal components, gauges, valves. Refer to instructions and website for full warranty details Tanks - Lateral Collector Arms - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 12 Filter - 650mm - 13, mm 40mm P.O.A Delta 12 Filter - 800mm - 20, mm 50mm P.O.A Delta 12 Filter mm - 23, mm 65mm $9, Delta 12 Filter- 1200mm - 34, mm 80mm P.O.A Collector arms detail Tanks - Lateral Collector Arms - Max working pressure: 250kPa (2.5 bar) Product Code Diameter Connections List Price Delta 12 Filter - 650mm - 13, mm 40mm P.O.A Delta 12 Filter - 800mm - 20, mm 50mm P.O.A Delta 12 Filter mm - 23, mm 65mm $12, Delta 12 Filter mm - 34, mm 80mm P.O.A Options Nozzle plate details Product Code List Price FX 90 Vinylester construction resistant to Ozone concentrations less than 0.4 ppm Refer to page 50 Multiport Valve 40mm MPV - S/M $ Multiport Valve 50mm MPV - S/M $ Multiport Valve 65mm MPV - S/M $ Union Adaptor 65mm X 2 1/2"" B $52.07 Multiport Valve 80mm with unions $1, Valve Manifold - Battery - 5 Valve $2, Valve Battery Support 80m $ Valve Battery Vertical Support 2.3m $ Add 10% of filter price inc Options Replaces the PTK Series Filters 66 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

5 FILTRATION Delta Filters DELTA 1000 DELTA 1200 Collector Arms Nozzle Plate Collector Arms Nozzle Plate D Ø P H L S (MM) Ø T Ø G Flow rate m3/h at 30 m3hm2 Flow rate m3/h at 40m3/h/m2 Multilayer Single Layer Anthracite mm (l) Sand mm (kg) Gravel 1-2mm (kg) Gravel 3-5mm (kg) Sand mm (kg) Gravel 1-2mm (kg) All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

6 FILTRATION Commercial Filter Options Code - Delta, Praga, Oslo & Rodas Please read this page in conjunction with the following commercial filter pages. This codification system is used for Delta, Praga, Oslo and Rodas. Use code numbers to specify options when ordering. Insert these codes after filter product code to identify required options. Nozzle plate underdrain available on all Praga and Oslo filters and is supplied with air wash connection. Additional side manhole is recommended for nozzle plate filters to remove sand. Vinylester ozone resistant internal coating available on Praga, Oslo and Rodas (resistant to ozone concentrations less than 0.4ppm). Position 6 Defines the nozzle plate and vinylester options Position 7 Defines manhole options Position 8 Defines sightglass options 0 Filter without nozzle plate 0 No Manhole 0 No sightglass 1 Filter with nozzle plate 1 1 x 225mm manhole 1 1 x sightglass - laminated filter 2 Vinylester finish 2 1 x 400mm manhole 2 1 x 135mm sightglass 3 Nozzle Plate & Vinylester 3 2 x 225mm manhole 3 2 x sightglass - laminted filter 4 2 x 400mm manhole 4 2 x 135mm sightglass Manhole Access for Commercial Filters - Delta, Praga, Oslo & Rodas Optional manhole for bobbin wound filters in side or top position with nominal diameters 225mm, 400mm, 500mm and 600mm. Manholes are in fibreglass reinforced polyester in the form of a flange with concave lid and can only be integrated into the filter at the factory or by a specialist. Product Code List Price Side manhole 225mm diameter $1, Side manhole 400mm diameter $3, Side manhole 500mm diameter - Filters from 1200mm mm $4, Side manhole 600mm diameter - Filters from 1800mm mm P.O.A Sightglass options for Commercial Filters - Delta, Praga, Oslo & Rodas Optional sightglass for bobbin wound filters. Position above Sand Bed Product Code List Price SIGHT GLASS - 135MM $1, Vinylester options for Commercial Filters - Delta, Praga, Oslo & Rodas Vinylester lining for ozone concentrations less than 0.4 ppm Vinylester Interior Coating List Price Add 10% of filter price inc Options Vinylester options for Commercial Filters - Delta, Praga, Oslo & Rodas Nozzle Plate with 0.5mm Slots with Air Wash connection. Optimum filter bed wash with equal distribution of water. Air wash connection enables clean water savings. See above for ordering code. 68 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

7 FILTRATION Valve Battery Manifold - Suitable for Delta, Praga, Oslo & Rodas 5 valve manual backwash system (unassembled). Each kit includes: 5 x tee pieces, 2 x 90º Elbows, 5 x buttefly valves, 12 x stub flanges, 12 x backing ring, 12 x flat gaskets (bolts, nuts and washers not included). Ordering: Specify manifold supports and brackets if required. (each valve battery requires a 2 x vertical supports, 2 x support clamps kits, giving a total of 2 floor supports and 4 x pipe clamps). 40mm to 200mm In Line Sight Glasses See Page 103 Product Code Size List Price Valve Manifold - Battery - 5 Valve mm $1, Valve Manifold - Battery - 5 Valve mm $2, Valve Manifold - Battery - 5 Valve mm $3, Valve Manifold - Battery - 5 Valve mm $6, Valve Manifold - Battery - 5 Valve mm $10, Valve Battery Manifold Supports Valve battery support system suitable for pipe sizes from 80mm to 200mm Ordering: Each valve manifold requires 2 x vertical supports, 2 x support clamps kits, giving a total of 2 vertical supports and 4 x pipe clamps. Product Code List Price Vertical Support: height 1.85m $ Vertical Support: height 2.30m $ Vertical Support: height 3.0m $ support clamp and anchors - 65mm $ support clamp and anchors - 80mm $ support clamp and anchors - 100mm $ support clamp and anchors - 150mm $ support clamp and anchors - 200mm $ Gauges Pressure Gauge Panels Complete, suitable for AstralPool Commercial filters Product Code List Price Gauge Panel complete with 2 x Gauges Pressure Gauge Panel Bar $ Pressure Gauge Panel - 4 Bar $ Gauge Only Pressure Gauge Bar $96.04 Pressure Gauge - 4 Bar $96.04 Double Action Air Relief Product Code List Price Double Action Air Relief Valve - 25mm To be installed with air purge valve on commercial filters when installed above water level. Body made in PP & Fibreglass. Seal - Nitrile Rubber $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

8 FILTRATION Praga Filters (Sand bed depth: 1.0m) Bobbin wound fibreglass commercial filters with diameters from 1050mm to 3000mm. Filter lid is 400mm diameter with air purge valve, 20mm slotted laterals in parallel layout, sand dump port, water drain valve, pressure gauge panel. Maximum operating pressure 250 kpa and 400 kpa models available. Options: Vinylester interior lining, nozzle plate underdrain, sightglass, side manhole, valve batteries. When ordered with nozzle plate collector we recommend the inclusion of a side manhole, specify size and position (225mm, 400mm, 500mm or 600mm). Ordering: Refer to Options Page for option codes and pricing. Warranty guide: 2 year full plus 8 year pro rata warranty on filter tank and 1 year full warranty on internal components, gauges, valves. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Praga Filter Ø mm* P.O.A Praga Filter Ø mm $7, Praga Filter Ø mm P.O.A Praga Filter Ø mm $8, Praga Filter Ø mm P.O.A Praga Filter Ø mm $9, Praga Filter Ø mm $10, Praga Filter Ø mm P.O.A Praga Filter Ø mm $12, Praga Filter Ø mm P.O.A Praga Filter Ø mm $12, Praga Filter Ø mm* P.O.A Praga Filter Ø mm $14, Praga Filter Ø mm $15, Praga Filter Ø mm* $16, Praga Filter Ø mm* $16, Praga Filter Ø mm $16, Praga Filter Ø mm* $30, Praga Filter Ø mm* $31, Praga Filter Ø mm $33, Praga Filter Ø mm* P.O.A Praga Filter Ø mm $35, Praga Filter Ø mm* P.O.A Praga Filter Ø mm P.O.A Praga Filter Ø mm * P.O.A 70 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

9 FILTRATION Praga Filters (Sand bed depth: 1.0m) Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Praga Filter Ø mm* P.O.A Praga Filter Ø mm $10, Praga Filter Ø mm P.O.A Praga Filter Ø mm $9, Praga Filter Ø mm P.O.A Praga Filter Ø mm $10, Praga Filter Ø mm $11, Praga Filter Ø mm P.O.A Praga Filter Ø mm $13, Praga Filter Ø mm P.O.A Praga Filter Ø mm $14, Praga Filter Ø mm* $15, Praga Filter Ø mm P.O.A Praga Filter Ø mm* P.O.A Praga Filter Ø mm* $18, Praga Filter Ø mm* P.O.A Praga Filter Ø mm* P.O.A Praga Filter Ø mm $39, Praga Filter Ø mm* P.O.A Praga Filter Ø mm P.O.A Praga Filter Ø mm* P.O.A Ø 1,050 1,200 1,400 1,600 1,800 2,000 2,350 2,500 3,000 Flange Ø Height of filtration sand (m) H 1,640 1,780 1,755 1,835 1,875 2,040 2,520 2,550 2,750 B A ,080 1,110 C Ø P ,085 1,230 1,370 1,550 1,859 1,859 2,650 E Filtration surface (m2) Volume (I) 1,050 1,500 2,000 2,600 3,400 4,400 8,045 9,050 12,800 Sand mm (kg) 950 1,375 1,650 2,150 2,800 3,800 5,275 5,950 8,600 Gravel 1-2mm (kg) ,050 1,800 2,200 3,300 Total Weight in operation (kg) 2,000 2,700 3,700 4,900 6,100 7,900 12,550 13,760 20,200 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

10 FILTRATION Oslo Filters - Technical Data & Dimensions (see overpage for media requirements) Ø Filtration Velocity (M3/H/ M2)) Ø N DN65 DN80 DN65 DN100 DN80 DN110 DN100 DN125 DN110 DN150 DN110 DN150 DN125 DN175 DN150 DN200 DN175 DN bar bar Flow Rate m3/h Filtration area m2 Vol (l) Amm Bmm Cmm Fmm Hmm Lmm Ø P mm R mm Ø S mm T mm W mm Total service weight kg With laterals With nozzle plate 72 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

11 FILTRATION Oslo Filters (Sand bed depth: 1.2m) Vertical high performance bobbin wound fibreglass filter. Equipped with pressure gauge, manual air vent, water purge and laterals with 0.3mm slots. Options: Nozzle collector plate with 0.5mm slots. Side manhole. Additional sightglass. Vinylester internal lining. s available for maximum working pressure 250 kpa (2.5 bar) and 400 kpa (4.0 bar). Ordering: Refer to Options Page for option codes and pricing. **All filter vessels from 2350mm diameter will require special transport. Please ask for a quotation at the time of your enquiry. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250kPa (2.5 bar) - Test Pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Oslo Filter Ø mm P.O.A Oslo Filter Ø mm $11, Oslo Filter Ø mm P.O.A Oslo Filter Ø mm $13, Oslo Filter Ø mm $15, Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm $19, Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm $29, Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm $29, Oslo Filer Ø mm* P.O.A Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm $47, Oslo Filter Ø mm P.O.A Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

12 FILTRATION Tanks - Maximum working pressure 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Oslo Filter Ø mm P.O.A Oslo Filter Ø mm $14, Oslo Filter Ø mm P.O.A Oslo Filter Ø mm $17, Oslo Filter Ø mm $19, Oslo Filter Ø mm* $20, Oslo Filter Ø mm $23, Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm P.O.A Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm $36, Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm* $43, Oslo Filter Ø mm P.O.A Oslo Filter Ø mm P.O.A Oslo Filter Ø mm* P.O.A Oslo Filter Ø mm P.O.A OSLO - MEDIA RECOMMENDATIONS MULTILAYER - Nozzle plate - Filtration bed 1.2 m Diameter mm Hydroanthracite ( ) Kg 600 mm Sand ( ) Kg 400 mm Gravel (1-2) Kg 100 mm Gravel (3-5) Kg 100 mm MULTILAYER - Nozzle plate - Filtration bed 1.5 m Diameter mm Hydroanthracite ( ) Kg 600 mm Sand ( ) Kg 600 mm Gravel (1-2) Kg 100 mm Gravel (2-3) Kg 100 mm Gravel (3-5) Kg 100 mm SINGLELAYER - Nozzle plate - Filtration bed 1.2 m Diameter mm Sand ( ) Kg 1100 mm Gravel (1-2) Kg 100 mm SINGLELAYER - Nozzle plate - Filtration bed 1.5 m Diameter mm Sand ( ) Kg 1200 mm Gravel (1-2) Kg 100 mm Gravel (2-3) Kg 100 mm Gravel (3-5) Kg 100 mm MULTILAYER - Collector arms - Filtration bed 1.2 m Diameter mm Hydroanthracite ( ) Kg 600 mm Sand ( ) Kg 400 mm Gravel (2-3) Kg 100 mm Gravel (3-5) Kg 100 mm (1) SINGLELAYER - Collector arms - Filtration bed 1.2 m Diameter mm Sand ( ) Kg 1100 mm Gravel (1-2) Kg 100 mm (1) All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

13 FILTRATION Rodas Filter 1050mm (Sand bed depth: 0.6mm) Fibreglass horizontal commercial sand filters 1050 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm $13, Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm $19, Rodas Filter Ø length mm* $20, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

14 FILTRATION Rodas Filters 1200mm (Sand Bed Depth: 0.6m) Fibreglass horizontal commercial sand filters 1200 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm $16, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $21, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* $15, Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $28, Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm $22, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $29, All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

15 FILTRATION Rodas Filter 1050mm & 1200mm Length Filtration Velocity (m3/h/ m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Total Service weight kg Sand Charge Kg Gravel Sand Diameter 1050mm - Height of filter bed 0.6m 1-1.2mm mm DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN Diameter 1200mm - Height of filter bed 0.6m DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

16 FILTRATION Rodas Filters 1400mm (Sand Bed Depth: 0.8m) Fibreglass horizontal commercial sand filters 1400 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filer Ø length mm* P.O.A Rodas Filter Ø length mm $34, Rodas Filter Ø length mm* P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $39, Rodas Filter Ø length mm* P.O.A 78 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

17 FILTRATION Rodas Filter 1600mm (Sand bed depth: 1.0m) Fibreglass horizontal commercial sand filters 1600 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details. * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm $33, Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 1, mm $27, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $31, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* $39, Rodas Filter Ø length mm $43, Rodas Filter Ø length mm $46, All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

18 FILTRATION Rodas Filters 1800mm (Sand Bed Depth: 1.0m) Fibreglass horizontal commercial sand filters 1800 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm $31, Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 3, mm $36, Rodas Filter Ø length 3, mm* $37, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* $36, Rodas Filter Ø length mm $32, Rodas Filter Ø length mm $53, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm $40, Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 3, mm $44, Rodas Filter Ø length 3, mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm $69, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A 80 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

19 FILTRATION Rodas Filter 1400mm, 1600 & 1800mm Length Filtration Velocity (m3/h/ m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Y Total Service weight kg Sand Charge Kg Diameter 1400mm - Height of filter bed 0.8m 1-1.2mm mm DN DN DN DN DN DN DN DN DN Diameter 1600mm - Height of filter bed 1m DN DN DN DN DN DN DN DN DN Diameter 1800 mm - Height of filter bed 1 m DN DN DN DN DN DN DN DN DN DN DN DN All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

20 FILTRATION Rodas Filters 2000mm (Sand Bed Depth: 1.2m) Fibreglass horizontal commercial sand filters 2000 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details. * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm $34, Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 3, mm $40, Rodas Filter Ø length 3, mm* P.O.A Rodas Filter Ø length mm $43, Rodas Filter Ø length mm* $44, Rodas Filter Ø length mm $40, Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* $46, Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 4, mm $54, Rodas Filter Ø length mm $55, Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length 2, mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 3, mm $53, Rodas Filter Ø length 3, mm* P.O.A Rodas Filter Ø length mm $53, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $59, Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $67, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 4, mm $62, Rodas Filter Ø length mm P.O.A 82 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

21 FILTRATION Rodas Filter 2350mm (Sand bed depth: 1.2m) Fibreglass horizontal commercial sand filters 2350 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length mm P.O.A Rodas Filter Ø length 3, mm* P.O.A Rodas Filter Ø length 3, mm P.O.A Rodas Filer Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 4, mm $107, Rodas Filter Ø length mm $107, Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm $93, Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filter Ø length mm P.O.A Rodas Filter Ø length 3, mm* P.O.A Rodas Filter Ø length 3, mm P.O.A Rodas Filer Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 4, mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm $116, Rodas Filter Ø length mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

22 FILTRATION Rodas Filters 2000mm & 2350mm Length Filtration Velocity (m3/h/ m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Y Total Service weight kg Sand Charge Kg Diameter 2000mm - Height of filter bed 1.2m 1-1.2mm mm DN M=1.2m DN M-1.2m DN DN M=1.2m DN M=1.2m DN DN M=1.2m DN M=1.2m DN DN M=1.2, DN M=1.2m DN DN M=1.2m DN M=1.2m DN Diameter 2350 mm - Height of filter bed 1.2 m DN M-1.2m DN M-1.2m DN DN M=1.2m DN M-1.2m DN DN M=1.2m DN M=1.2m DN DN M=1.2m DN M=1.2m DN DN M=1.2m DN M=1.2m DN All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

23 FILTRATION Rodas Filter 2500mm (Sand bed depth: 1.2m) Fibreglass horizontal commercial sand filters 2500 mm diameter. Maximum operating temperature 50ºC. Tested at 1.5 times maximum operating pressure. Equipped with pressure gauge panel, manual air, water purge and 400mm loading access. Internal components and pipe in PVC. Laterals 0.3 mm slots in PP. Bolts, nuts and washers in AISI EPDM seals and gaskets. Options: Options for side opening placement. Vinylester internal lining for ozone treated pools. Sightglass 135mm and 400mm side manhole. Ordering: Refer to Options Page for options codes and pricing. Warranty guide: 2 year full plus 8 year pro rate warranty on filter tank and 1 year full warranty on internal components, gauges, valve. Refer to instructions and website for full warranty details * EUROPEAN PIPE CONNECTIONS Tanks - Maximum working pressure: 250 kpa (2.5 bar) - Test pressure 375 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filer Ø length MM P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 4, mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm P.O.A Tanks - Maximum working pressure: 400 kpa (4.0 bar) - Test pressure 600 kpa Product Code Velocity m3/h/m2 Flow Rate m3/hr Connections List Price Rodas Filer Ø length MM P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length 4, mm P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm* P.O.A Rodas Filter Ø length mm P.O.A Rodas Filter Ø length mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

24 FILTRATION Rodas Filters 2500mm Length Filtration Velocity (m3/h/m3) Ø N 2.5 bar 4 bar Flow m3/h Filtration area m2 Vol (l) A B C E F H I P T W Y Total Service weight kg Sand Charge Kg Diameter 2500mm - Height of filter bed 1/1.2m 1-1.2mm mm DN M=1.2m DN M=1.2m DN DN M=1.2m DN M=1.2m DN DN M=1.2m DN M=1.2m DN DN M=1.2m DN M=1.2m DN All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

25 FILTRATION Commercial Blowers Air blowers designed to shake the filtration bed during the backwashing process or to supply air wherever required. The blower housing and the impeller are made of a light Aluminium alloy, whereas the shaft is made of S.S. on which the impeller is mounted and dynamically balanced. The / V single phase and the / V three phase motors at 50/60 Hz for non-stop operation, are manufactured according to the IEC Standards and come with an IP 54 outer protection and an F Class insulation. The pumps can be installed both horizontally and vertically, and as there is no contact between the fixed and movable blower parts, it does not require any lubrication nor maintenance, neither is there any wear and tear. Product Code Ø Filter mm Maxi Presure (mbar) Maxi flow m3/h Power kw List Price Air Blower 0.75Kw. 3 Phase $3, Air Blower 1.1Kw 1 Phase $3, Air Blower 1.75 KW 415v 3 Phase $5, Air Blower 2.2 KW 415v 3 Phase $3, Air Blower 3.4 KW 415v 3 Phase $5, Air Blower 4.0 KW 415v 3 Phase $11, Air Blower 7.5 KW 415v 3 Phase $19, Air Blower 11 KW 415v 3 Phase P.O.A Filter Media Product Product Code For Sale only in Bag Size List Price Sand - 16/30 Grade For VIC Sales 25 kg $30.00 Sand - 16/30 Grade For NSW Sales 20 kg $25.00 Sand - 16/30 Grade For QLD Sales 20 kg $25.00 Sand - 16/30 Grade For SA Sales 25 kg $30.00 Sand - 16/30 Grade For WA Sales 25 kg $30.00 Viron Glass Media VF # 35 Super Fine 15 kg $40.00 Viron Glass Media VF # 8 Coarse 15 kg $40.00 Sand quantity less 20% = Glass quantity (by weight). Sand quantity less 25% = Zeolite quantity (by weight). All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

26 FILTRATION KIVU Filter Pumps Huge hair and lint bowl with 170mm wide and 230mm deep basket. Ramp on lid lock ring for easy removal and positive sealing. Whisper quiet operation.. True carbon face mechanical seal. Suitable for demanding applications and commercial pools and spas. Three Phase pumps designed for commercial applications. 4 pole 1450 RPM motor, 75% hydraulic efficiency, 150mm inlet and 125mm outlet connections, closed coupled independent plastic pre-filter. Standard motor shaft for compatibility with off the shelf motors, MEPS compliant, UL and GS marked, Self Priming and VSD available. Ordering: Please specify product number when ordering. Warranty guide: Limited 3 year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price KIVU 7.5hp Plastic Commercial Pump with Hair and Lint Pot 6 inlet and 5 outlet $7, KIVU 10hp Plastic Commercial Pump with Hair and Lint Pot 6 inlet and 5 outlet $8, KIVU 15hp Plastic Commercial Pump with Hair and Lint Pot 6 inlet and 5 outlet $11, Variable Speed Driver to suit 7.5 hp motor $2, Variable Speed Installation Kit (10m cable) $ Variable Speed Driver to suit 10 hp motor $3, Variable Speed Driver to suit 15 hp motor $3, Variable Speed Installation Kit (10m cable) $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

27 FILTRATION Maxim Pump Pump body and support in heat resistant plastic. Double protected shaft S.S. AISI- 420 with double isolation and with IP-55 motor. 8 litre capacity strainer. Inlet / outlet connections 3 (80mm) solvent socket. Suction at 1.5 m height. Three-phase 415volts - 2,900rpm. Type Voltage A B C D E F G H I J HP 230/ HP 230/ HP 230/ Type Voltage Standard Volume m HP 230/ H (m) m3/h HP 230/ H (m) m3/h HP 230/ H (m) m3/g Product Code Flow 8m/h Full Load Amps per Phase List Price Maxim Pump HP lpm 5.8 $2, Maxim Pump HP lpm 7.4 $3, Maxim Pump HP lpm 8.4 $3, HP 5.0 HP 6.0 HP Commercial Pumps AstralPool Australia supply models from the wide range of Grundfos pumps to suit commercial pool applications large and small. The Grundfos NB and NBG end suction centrifugal pumps can be matched to your project specification in many different configurations. Options are available for 2-pole and 4-pole motors, cast iron, stainless steel or bronze impellers. Base plates and strainer options can also be matched to your choice of pump. For Grundfos commercial pumps contact your local AstralPool branch with pump duty, flow and head details for a quote. All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

28 pumps BX High Performance Pumps Huge hair and lint bowl with 170mm wide and 230mm deep basket, 65mm and 50mm unions included and whisper quiet operation. Ramp on lid lock ring for easy removal and positive sealing. True carbon face mechanical seal. Suitable for demanding applications and commercial pools and spas. Three Phase pumps designed for commercial applications. Ordering: Please specify product number when ordering. Warranty guide: Limited 3 year warranty on all components. Refer to instructions and website for full warranty details 740 MAX. 3HP MODEL Product Code Volts Phase Input Watts Full Load Amps Flow 8 m/h Conns mm List Price BX 1.5 HP Pool & Spa Pump Single lpm 65/50 $1, BX 2.0 HP Pool & Spa Pump Single lpm 65/50 $1, BX 3.0 HP Pool & Spa Pump Single lpm 65/50 $1, BX 2.0 HP Pool & Spa Pump 3 Phase Three lpm 65/50 $1, BX 3.0 HP Pool & Spa Pump 3 Phase Three lpm 65/50 $1, BX 4.0 HP Pool & Spa Pump 3 Phase Three lpm 80 $2, Day Lead Time on 3 Phase Pumps 90 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

29 strainers Strainer in Polypropylene and Fibreglass - 33L Capacity Flanges drilled according to DIN Hoop type clamp. Drain plug. Maximum working pressure: 1.5bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Connections 100mm - 55 m3/h $3, Connections 140mm - 90 m3/h $3, Strainer 3-37 m3/h P.O.A Strainer in Polypropylene and Fibreglass - 33L Capacity with Sightglass Flanges drilled according to DIN Hoop type clamp. Drain plug. Maximum working pressure: 1.5bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer - 33L - 80mm - 37 m3/h $3, Strainer - 33L - 100mm - 55 m3/h $3, Strainer - 33L - 125mm - 72 m3/h P.O.A Strainer - 33L - 140mm - 90 m3/h $4, Strainer - 4"" - 33L - 55 m3/h $4, Ref H D M Ø E Sightglass Cover Hoop clamp Gasket Basket 33 l (Ø 5) Drain plug Connection to pump All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

30 strainers Strainer Polypropylene and Fibreglass - 60L Capacity Flanges drilled according to DIN-2501 Standard. Hoop type clamp. Drain plug. Maximum working pressure 1.5 bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer - 60L - 150mm m3/h $5, Strainer - 60L - 225mm m3/h $6, Strainer Polypropylene and Fibreglass - 60L Capacity Sightglass Flanges drilled according to DIN Hoop type clamp. Drain plug. Maximum working pressure: 1.5bar. Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer- 60L - 150mm- 118 m3/h $6, Strainer- 60L - 200mm- 233 m3/h $7, l Polyester STRAINER. Hoop clamp Cover Gasket Basket 60 l (Ø 5) Basket 60 lts. (Ø5) Connection to pump Drain plug Strainer Polypropylene and Fibreglass Flanges drilled according to DIN-2501 Standard. Supplied with 3 piece coupling at the inlet. 8 litre capacity. Inlet size: 80mm ID - Outlet size: 100 mm ID. Max Flow 88m3 / HR Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Strainer in polypropylene - 8L Capacity $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

31 flanges Vibration Absorbent Bushing Flanges in galvanized steel. Elastic material: Polychloroprene. Maximum temperature 95ºC. Nominal pressure: 10 Kg/cm2 (PN/10). Available in PN 16 under special order. Din Flanges Ordering: Please specify product number when ordering. Warranty guide: Limited three (3) year warranty on all components. Refer to instructions and website for full warranty details Product Code List Price Antivibration flange D.80mm $ Antivibration flange D.100mm $ Antivibration flange D.125mm* $ Antivibration flange D.150mm $ Antivibration flange D.200mm P.O.A Antivibration flange D.250mm P.O.A Check Valves Nominal pressure 10 kg/cm2. Mounted between flanges. Available in PN 16 and PN 25 under special order. Cast Iron. * European Pipe Connections Product Code List Price Outlets Ø 65mm P.O.A Outlets Ø 80mm P.O.A Outlets Ø 100mm P.O.A Outlets Ø 125mm* P.O.A Outlets Ø 150mm $ Outlets Ø 200mm P.O.A Outlets Ø 250mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

32 Boilers / gas heaters HR Commercial Pool Heaters Commercial Pool Heater, Natural Gas or LP Gas, balanced flue for outdoor installation or inbuilt draft diverter when installed indoors, Bronze Headers, large 22.25mm internal diameter finned copper tube heat exchanger, Genus IV Thermostat, G4 compliant, High efficiency, marine grade, powder coated cabinet inside and out, Superwool refractory insulation for low residual heat. Options: Left or right hand water connections. Indoor or Outdoor LP Gas or Natural Gas Remote Thermostat Ordering: Please specify product number, indoor or outdoor, LPG or Natural Gas. Allow 25 days for manufacturing. Type B commissioning available onsite - POA Warranty guide: 12 months on parts. Refer to instructions and website for full warranty details HR1800 = 2504 HR1600 = 2254 HR1400 = 2004 HR1200 = 1754 HR1000 = 1504 HR800 = 1254 HR600 = GAS LENGTH Product Code - NAT Product Code - LPG MJ Input kw Output A Dim B Dim C Dim Gas Conn. Water Conn. List Price HR Outdoor Heater $11, HR Outdoor Heater $12, HR 1000 Outdoor Heater $14, HR 1200 Outdoor Heater $15, HR 1400 Outdoor Heater $17, HR 1600 Outdoor Heater $18, HR 1800 Outdoor Heater $19, HR Indoor Heater $10, HR Indoor Heater $12, HR Indoor Heater $13, HR Indoor Heater $15, HR Indoor Heater $16, HR Indoor Heater $17, HR Indoor Heater $19, Pool Heater shall be a Hurlcon HR Series model HR rated at kw output and MJ input. The heat exchanger shall be of copper finned tube with one piece extruded integral fin. The tubes shall be mechanically expanded directly into bronze headers to prevent water leaks from silicone gaskets. Unit shall be standard with flow switch, run and fault contacts and pump run on timer. Burners shall be stainless steel with venturi design and mixing baffle to ensure even flame distribution along entire length of burner. Marine grade Powder coated panels shall be easily removable for servicing and burner removal. Boiler shall have integral outdoor weatherproof flue design for outdoor installation and integral draft diverter for indoor installation. Temperature control will be achieved by the integrated Genus IV thermostat which incorporates diagnostic fault display, flame roll out sensor and 45 degree over temperature high limit. 94 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

33 Heat pumps AstralPool Commercial Heat Pumps Heat Pump suitable for commercial pools in sizes ranging in 9 hp to 40hp Titanium heat exchanger, powder coated case. Flow rate from 250 lpm to 833 lpm. Lead time weeks Warranty Guide: 10 years on Heat exchanger, 3 years on compressor and evaporator, 1 year on control. Refer to instructions and website for full warranty details Product Code List Price AHP100 Heat Pump - 45KW - 9HP $18, AHP130 Heat Pump - 55KW - 10HP $19, AHP200 Heat Pump - 82KW - 15HP $27, AHP250 Heat Pump - 108KW - 20HP $36, AHP400BU Heat Pump - 160KW - 30HP $45, AHP500BU Heat Pump - 210KW - 40HP $56, Product Code Output Amps COP Water Flow(min) Compressor Fans Dimensions Weight AHP100 Heat Pump W 15.7A lpm x730x kg AHP130 Heat Pump W 18.8A lpm x730x kg AHP200 Heat Pump W 29.8A lpm x760x kg AHP250 Heat Pump W 37.9A lpm x1065x kg AHP400BU Heat Pump W 61.0A lpm x1065x kg AHP500BU Heat Pump W 81.8A lpm x1170x kg All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

34 water treatment Heliox UV MP - automatic disinfection for public pools The Heliox UV MP treatment system has a number of advantages over chemical disinfection systems, since virtually UV light does not alter the physical and chemical composition of water, it is very effective against any type of organism (algae, bacteria, virus, fungi, yeasts, etc.) further minimizing the risks of handling and dosing of hazardous chemicals. Moreover, UV treatment reduces the levels of combined chlorine in the water, thereby producing significant water and energy savings by reducing the volume and frequency of pool water renewals. The Heliox UV MP treatment systems have been designed and manufactured with the latest technology in UV treatment of water, thus ensuring continuous operation and minimal maintenance. The proposed control architecture for HELIOX UV MP system has a number of features that allow the highest levels of reliability, efficiency and scalability. Because the systems incorporate calibrated radiation and flow sensors, continuous adjustment of the lamp power is allowed, thus optimizing energy consumption and lifetime. Calibrated sensors do not require any user action on them. HELIOX UV MP systems manage two parameters when setting the lamp power, radiation measured by the sensor and flow. Thus, the system sets a nominal radiation for each model, which is determined by the maximum treatment flow to ensure a dose of 60 mj/cm2. If the flow to be treated is less than the nominal one, so too will be the radiation needed, so the system will decrease the output power, optimizing the energy consumption and increasing lamp life. Like the current UV systems, whether radiation decreases due to loss of efficiency of the lamp, turbidity, etc., the system will adjust the lamp power to ensure the nominal dose. The lamp power system is based on an electronic ballast which allows continuous operation with high efficiency (greater than 95%). Contact your AstralPool representative for further details and pricing. Salt Electrolysis for public pools Our wide range of industrial electrolysis systems covers self-cleaning equipment of up to 500 grams/hour of Chlorine, which makes it possible to use saline electrolysis to treat the water at any public use facility. Our Basic range incorporates EX electrodes which provide the highest durability in selfcleaning systems. The Plus range incorporates a control and automatic dosing equipment for ORP (Redox) and PH which allows for better management of the equipment and provides an excellent water quality at all times. The Plus Plus range incorporates a Chlorine and ph value control and regulation system. Main advantages: Safety: There is no need to store, handle or dose any chemical products and therefore it is a much safer system. The raw material stored is common salt. Savings: The introduction of saline electrolysis systems can bring net savings in operating costs of around 50-60%, with respect to traditional systems. Peristaltic pump not included. Contact your AstralPool representative for further details and pricing. 96 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

35 Pool return inlets Concrete Pool Inlets Adjustable floor inlet with swivel join body in PVC. Regulating screw in POM. Max. flow rate: 14m3/h. To be fixed on 65 mm diameter pipe and wall conduit Product Code List Price Adjustable floor inlet - swivel joint $37.02 Pool Inlets Product Code List Price Return inlet multiflow (2 male thread) - Concrete $22.18 Floor Return Inlet 2 Thread - Vinyl or Concrete $63.64 Wall Return Inlet - Fibreglass - 90mm $93.73 concrete Wall Return Inlet - 90mm $54.38 Wall Return Inlet - Skypool - 90mm $93.73 Reducing Conduit Reducing conduit 50mm OD x 65mm ID Product Code List Price Reducing cond 50mm OD x 65mm ID $84.47 Overflow Outlet For Skypool PVC body, PA flange and Stainless Steel screw. Product Code List Price Overflow Outlet 90mm Skypool $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

36 ladders & RAILS Access Ladders Standard ladder with handrails with deluxe non slip step. Rails & steps made from 316 Stainless Steel. Ordering: Please specify product number when ordering. Warranty guide: 12 months. Refer to instructions and website for full warranty details Product Code List Price 2 steps ladder deluxe $ steps ladder deluxe $ steps ladder deluxe $1, Exit grab rail inc fixing plate $ Reinforced anchoring in Stainless steel x 2 (include gaskets, $ screws and rawl plugs) Ladder anchoring sockets P.O.A Anchor with locking bolts (2 units) $ Anchoring estutcheon cover $15.10 Access Ladders for Disabled Persons 500mm Width For easy entry and exit into exercise of hydrotherapy pools for people not requiring an hydraulic lift chair. Available as 970 mm width model. Please refer to your sales office. Max load 170kg. Ordering: Please specify product number. Warranty guide: 12 months. Refer to instructions and website for full warranty details Product Code List Price Access ladder for disabled persons 4 steps $3, Access ladder for disabled persons 5 steps $4, Access ladder for disabled persons 6 steps $5, Access ladder for disabled persons 7 steps $6, Anchor Kit - Pool Ladder (Pair) $ Escutcheon Anchor Cover (1 unit) $15.10 Step kit for transforming a ladder from width 500 to 970mm To convert ladder from 500 mm to 970 mm. One Step Kit will be necessary for each of the steps of the ladder. In polished AISI 316 stainless steel, with plastic step with non-slip surface. Ordering: Please specify product number. Warranty guide: 12 months. Refer to instructions and website for full warranty details Product Code List Price Step Kit $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

37 accessories Waterlift Made of Stainless Steel AISI-316 and injected plastic parts. It helps users to access the pool. With the Waterlift, going in and out has never been so easy. Comfort and quality added to your pool. Very easy to use and maintain. Automatic lifting device, driven by a 24 V CC single phase motor reducer. IP-67 isolation for all the electrical and electronic components. The different components are controlled by an electronic plate. The system is operated by two push-button (up and down) placed on the rail. Ergonomic and functional design. Product Code List Price Waterlift $34, Hydraulic Chair Lift Hydraulic chair lift. Frame made mainly in stainless steel AISI-316 with a central hydraulic mechanism and seat, provided with also a ladder for the assistant. For correct hydraulic operation a minimum 3.5Kg/cm2 water supply pressure is required. For minimum water depth 1.6m Ordering: The external fixings are 2 metal anchoring fixtures (supplied with the unit) and the 2 internal fixings are adjustable which allows the height to be altered for different types of swimming pool surround. For pool depths less than 1.4 m please inquire. Special order by quotation Product Code List Price Select rails, add cylinder and add components Rails L $3, Rails L $3, Cylinder $5, Components $6, All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

38 END PIECE COMMERCIAL POOLS grating General Note for all Grating s Made of stabilised Polypropylene against U.V. rays. Standard white colour. Please enquire for other colours. These are supplied as modules of gratings for straight or curved runs (outer radius of 1 or 2 metres). The gratings click together with a male-female pressure fit permitting a certain amount of flexibility in assembly which absorbs any expansion which may occur when the tiles are exposed to heat fluctuations. For all types of gratings it is necessary to construct the channel 5 mm wider than the grating itself, to allow for ease of removal and for expansion. Channel width Grating width Channel width mm Grating tile 2,5 mm Height of grating (h) varies according to model. Longitudinal model h = 24 mm Transversal model h = 22 mm and h = 35 mm LONGITUDINAL MODEL 0% water INLET Code The longitudinal design of the tiles ensures that any excess water from the pool is not allowed to overflow onto the pool deck, maintaining the area dry. 100% water END PIECE STRAIGHT TILE CURVED TILE STRAIGHT TILE CURVED TILE L L1 h A r.1m. r.2m r.1m. r.2m All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

39 grating Parallel Grating Title Made in PP, stabilised against UV rays. For clicking together same types of male-female gratings (5 units = m) Their flexibility enables obtaining a curve with a minimum radius of 5 m. Product Code List Price Height 24mm, Width 195mm $20.61 Height 24mm, Width 245mm $21.35 Height 24mm, width 295mm $22.41 Height 24mm, Width 345mm $23.60 End Piece for Parallel Title To finish, end tiles, should cutting be necessary. Made in Polypropylene. Product Code List Price Height 24mm, Width 195mm $5.87 Height 24mm, Width 245mm $5.98 Height 24mm, width 295mm $6.11 Height 24mm, Width 345mm $6.36 End Piece kit for parallel grating AISI-304, made of PP with stabilisers to protect from UV rays. Made to adapt on the last piece of each longitude in case it must be cut. Product Code List Price Height 24mm, Width 245mm A16065 $ Height 24mm, width 295mm A16066 $ Height 24mm, Width 345mm A16067 $ Grating support profile S.S. corner support section Grating end piece All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

40 grating Grating Support Profile Suitable for 22, 24 and 35 mm high grating. Made in plastic. Supplied in 2 m lengths. Inside measurement 24 mm x 37 mm. Product Code List Price Suitable for 22, 24 and 35mm $25.45 Supplied in 2 meter lengths Modular transversal grating for curves Made in PP, stabilised against UV rays. United by modular fitting (45 units per m.) Product Code List Price Modular Grating for Curves Height 22mm, Width 195mm $2.40 Height 22mm, Width 245mm $2.98 Height 22mm, Width 295mm $3.11 Height 22mm, Width 335mm $3.96 Modular Grating for Curves - different grip pattern on each side Height 35mm, Width 195mm $2.98 Height 35mm, Width 245mm $2.98 Height 35mm, Width 295mm $3.11 Height 35mm, Width 335mm $3.96 Code H Channel Width (L) Grating Width (L) Measurements in mm 102 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

41 grating Modular Transversal Grating for Curves Made of PP stabilised against UV rays. Assembled together by modular fitting. According to EN standard (8mm). Available in 5 colours. Other grating colours can be supplied on request. For further information, please contact your AstralPool distributor. Colour minimum order is 3150 pieces or 60 meters 53 PIECES PER METER Product Code Standard Packaging Standard Weight kg List Price Modular Grating for Curves Height 22mm, Width 195mm P.O.A Height 22mm, Width 245mm $2.26 Height 22mm, Width 295mm $2.40 Height 22mm, Width 335mm P.O.A Modular Grating for Curves - different grip pattern on each side Height 35mm, Width 195mm P.O.A Height 35mm, Width 245mm $2.40 Height 35mm, Width 295mm $2.33 Height 35mm, Width 335mm P.O.A Dark brown RAL 8002 AstralPool blue RAL 5003 Ivory RAL 1015 Liner blue RAL 5024 Colour Code White - Black Grey RAL 1015 CL90 RAL 8002 CL109 RAL 5003 CL 60 Measurements in mm RAL 5024 CL108 Code H Channel Width (L) Grating Width (L1) R r Standard white Transversal Grating Made in PP, stabilised against UV rays. Assembled together by a cable (49 units per metre). Product Code Stainless Steel Cable must be installed Channel Width (L) Grating Tile (L1) H List Price Height 22mm, Width 195mm $ 2.16 Height 22mm, Width 245mm $2.88 Stainless Steel AISI-316 Cable $4.35 (Meters) Locking Pin for Cable in Brass $3.36 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

42 grating 90 Corner tiles for overflow channels Made of injected white Polypropylene. Measurements in mm Product Code A H L P List Price Height 22mm, Width 195mm $83.31 Height 22mm, Width 245mm $ Height 22mm, Width 295mm $ Height 22mm, Width 335mm $ Height 35mm, Width 195mm $89.10 Height 35mm, Width 245mm $ Height 35mm, Width 295mm $ Height 35mm, Width 335mm P.O.A Stainless Steel Longitudinal Grating and Stainless Steel 90 Corner Longitudinal overflow grating, made in Stainless Steel. It is necessary to construct the channel 5mm wider than the grille itself, to allow for easy assembly. It is made up of straight sections of AISI-304 Stainless Steel, 500 mm in length. Straight sections can be made-to-measure in order to fit the length of the swimming pool. The 90º corner is made of Stainless Steel and is the perfect complement to the Stainless Steel longitudinal grating. Metal with non-slip surface. 4 models with different sizes according to the width of grating used. Product Code List Price Stainless Steel longitudinal grille 195mm x 500mm $ Stainless Steel longitudinal grille 245mm x 500mm $ Stainless Steel longitudinal grille 295mm x 500mm $ Stainless Steel longitudinal grille 345mm x 500mm $ Stainless Steel 90 corner 195mm $ Stainless Steel 90 corner 245mm $ Stainless Steel 90 corner 295mm $ Stainless Steel 90 corner 345mm P.O.A Grating Code Corner Code L1 L All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

43 pressure fittings PVC 90 Elbow - Solvent x Solvent Product Code Pipe Size (DN) List Price 15mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm P.O.A 200mm 90 Elbow mm $ mm 90 Elbow mm $ mm 90 Elbow mm $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

44 pressure fittings 90 Corner tiles for overflow channels Product Code Pipe Size (DN) List Price 15mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm P.O.A 200mm 45 Elbow mm $ mm 45 Elbow mm $ mm 45 Elbow mm $ PVC 90 Tee - Solvent x Solvent Product Code Pipe Size (DN) List Price 15mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm P.O.A 200mm 90 Tee mm $ mm 90 Tee mm $ mm 90 Tee mm $1, All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

45 pressure fittings PVC Coupling - Solvent x Solvent Product Code Pipe Size (DN) List Price 15mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ mm Coupling mm P.O.A 200mm Coupling mm $ mm Coupling mm $ mm Coupling mm $ PVC Coupling - Solvent x BSPF Threaded Product Code Pipe Size (DN) List Price 15mm Coupling - BSPF mm x 1/2 $ mm Coupling - BSPF mm x 3/4 $ mm Coupling - BSPF mm x 1 $ mm Coupling - BSPF mm x 1-1/4 $ mm Coupling - BSPF mm x 1-1/2 $ mm Coupling - BSPF mm x 2 $6.58 PVC Adaptor - Metric x BS Product Code Pipe Size (DN) List Price 50mm (euro) x 1-1/2 Adaptor D50mm x 1-1/2 $ mm (euro) x 2 Adaptor D63mm x 2 $ mm (euro) x 3 Adaptor D90mm x 3 $ mm (euro) x 4 Adaptor D110mm x 4 $23.73 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

46 pressure fittings PVC Reducers Product Code Pipe Size (DN) List Price Dn - Normal Bore of Pipe 20mm x 15mm Reducer mm x 15mm $ mm x 20mm Reducer mm x 20mm $ mm x 15mm Reducer mm x 15mm $ mm x 25mm Reducer mm x 25mm $ mm x 20mm Reducer mm x 20mm $ mm x 32mm Reducer mm x 32mm $ mm x 25mm Reducer mm x 25mm $ mm x 40mm Reducer mm x 40mm $ mm x 50mm Reducer mm x 50mm $ mm x 65mm Reducer mm x 65mm $ mm x 80mm Reducer mm x 80mm $ mm x 125mm Reducer mmx 125mm $ mm x 175mm Reducer mm x 175mm $ mm x 150mm Reducer mm x 150mm $ mm x 200mm Reducer mm x 200mm $ mm x 225mm Reducer mm x 225mm $ mm x 200mm Reducer mm x 200mm $ PVC Conical Reducers Product Code Pipe Size (DN) List Price D mm x 160mm C Reducer D mm x 160mm $91.41 D mm x 160mm C Reducer D mm x 160mm $ PVC Stub Flanges Product Code Pipe Size (DN) List Price 50mm Stub Flange mm $ mm Stub Flange mm $ mm Stub Flange mm $ mm Stub Flange mm $ mm Stub Flange mm $ mm Stub Flange mm $ mm Stub Flange mm P.O.A 200mm Stub Flange mm $ mm Stub Flange mm $ mm Stub Flange mm $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

47 pressure fittings PVC Backing Rings Product Code Pipe Size (DN) List Price 50mm Backing Rings mm $ mm Backing Rings mm $ mm Backing Rings mm $ mm Backing Rings mm $ mm Backing Rings mm $ mm Backing Rings mm $ mm Backing Rings mm P.O.A 200mm Backing Rings mm $ mm Backing Rings mm $ mm Backing Rings mm $ Flat Gaskets Product Code Pipe Size (DN) List Price DN - Normal Bore of Pipe 50mm Flat Gasket mm $ mm Flat Gasket mm $ mm Flat Gasket mm $ mm Flat Gasket mm $ mm Flat Gasket mm $ mm Flat Gasket mm $ mm Flat Gasket mm P.O.A 200mm Flat Gasket mm $ mm Flat Gasket mm $25.45 PVC Cap Product Code Pipe Size (DN) List Price DN - Normal Bore of Pipe 15mm Cap mm $ mm Cap mm $ mm Cap mm $ mm Cap mm $ mm Cap mm $ mm Cap mm $ mm Cap mm $ mm Cap mm $ mm Cap mm $80.99 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

48 pressure fittings PVC Adaptor - Solvent x BSPM Threaded Product Code Pipe Size (DN) List Price 15-10mm x 1/2 Adaptor mm x 1/2 $ mm x 3/4 Adaptor mm x 3/4 $ mm x 1 Adaptor mm x 1 $ mm x 1 1/4 Adaptor mm x 1 1/4 $ mm x 1 1/2 Adaptor mm x 1 1/2 $ mm x 2 Adaptor mm x 2 $5.17 PVC Adaptor Bush - Solvent x BSP Threaded Product Code Pipe Size (DN) List Price 15mm x 1/2 Bush mm x 1/2 $ mm x 3/4 Bush mm x 3/4 $ mm x 1 Bush mm x 1 $ mm x 1 1/4 Bush mm x 1 1/4 $ mm x 1 1/2 Bush mm x 1 1/2 $ mm x 2 Bush mm x 2 $ mm x 2 1/2 Bush mm x 2 1/2 $ mm x 3 Bush mm x 3 $19.30 PVC Nipples - BSPM Threaded x BSPM Threaded Product Code Pipe Size (DN) List Price 1/2 Nipple /2 $1.72 3/4 Nipple /4 $ Nipple $ /4 Nipple /4 $ /2 Nipple /2 $ Nipple $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

49 pressure fittings Spigots - Solvent Product Code Pipe Size (DN) List Price 20mm x 20mm Spigot mm x 20mm $ mm x 25mm Spigot mm x 25mm $1.94 Spigots - Solvent x BSPM Product Code Pipe Size (DN) List Price 1/2 x 20mm /2 x 20mm $1.57 3/4 x 25mm /4 x 25mm $ x 30mm x 30mm $2.63 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

50 pressure fittings Unions - Solvent Product Code Pipe Size (DN) List Price 15mm Union mm $ mm Union mm $ mm Union mm $ mm Union mm $ mm Union mm $ mm Union mm $ mm Union mm $ mm Union mm $39.32 Unions - BSPF Product Code Pipe Size (DN) List Price 1/2 Threaded Union /2 $5.45 3/4 Threaded Union /4 $ Threaded Union $ /4 Threaded Union /4 $ /2 Threaded Union /2 $ Threaded Union $18.46 Unions - BSP x Female Solvent Socket Product Code Pipe Size (DN) List Price 40mm x 1 1/2 Threaded Union mm x 1 1/2 $ mm x 2 Threaded Union mm x 2 $ mm x 2 1/2 Threaded Union mm x 2 1/2 $ mm x 3 Threaded Union mm x 3 $63.64 Inline Sight Glass - Female Solvent Sockets Product Code Pipe Size (DN) List Price 40mm Sight Glass mm P.O.A 50mm Sight Glass mm $ mm Sight Glass mm $ mm Sight Glass mm $ mm Sight Glass mm $ mm Sight Glass mm $ mm Sight Glass mm $ /2 Sight Glass /2 $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

51 PVC VALVES Standard Ball Valves - PE - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm (ND80mm) Ball Valve mm (ND80mm) $ mm Ball Valve mm P.O.A Standard Ball Valves - PE EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve /2 $ /4 Ball Valve /4 $ Ball Valve $ /4 Ball Valve /4 $ /2 Ball Valve /2 $ Ball Valve $ /2 Ball Valve /2 P.O.A 3 Ball Valve $ (ND 3 ) Ball Valve (ND 3 ) P.O.A 4 Ball Valve $ Standard Ball Valves - Teflon - EPDM - Solvent Sockets Product Code Pipe Size (DN) List Price 15mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm P.O.A 40mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm (ND80mm) Ball Valve mm (ND80mm) P.O.A 100mm Ball Valve mm P.O.A All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

52 pressure fittings Standard Ball Valves - Teflon - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve /2 P.O.A. 3/4 Ball Valve /4 P.O.A. 1 Ball Valve P.O.A 1 1/4 Ball Valve /4 P.O.A 1 1/2 Ball Valve /2 P.O.A 2 Ball Valve $ /2 Ball Valve /2 P.O.A 3 Ball Valve P.O.A 4 (ND 3 ) Ball Valve (ND 3 ) P.O.A 4 Ball Valve P.O.A Standard Ball Valves - Teflon - Viton - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve mm P.O.A 20mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm P.O.A. 40mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm P.O.A. 80mm Ball Valve mm P.O.A. 100mm (ND80mm) Ball Valve mm (ND80mm) P.O.A. 100mm Ball Valve mm P.O.A. Standard Ball Valves - Teflon - Viton - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve /2 P.O.A. 3/4 Ball Valve /4 P.O.A. 1 Ball Valve $ /4 Ball Valve /4 P.O.A. 1 1/2 Ball Valve /2 P.O.A. 2 Ball Valve $ /2 Ball Valve /2 P.O.A 3 Ball Valve P.O.A. 4 (ND 3 ) Ball Valve (ND 3 ) P.O.A. 4 Ball Valve P.O.A. 114 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

53 PVC VALVES Industrial Ball Valves - Teflon - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm P.O.A. 80mm Ball Valve mm $ mm Ball Valve mm P.O.A. Industrial Ball Valves - Teflon - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve /2 $ /4 Ball Valve /4 $ Ball Valve $ /4 Ball Valve /4 P.O.A 1 1/2 Ball Valve /2 P.O.A 2 Ball Valve $ /2 Ball Valve /2 P.O.A 3 Ball Valve P.O.A 4 Ball Valve P.O.A Industrial Ball Valves - Teflon - Viton - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Valve mm P.O.A 20mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ mm Ball Valve mm $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

54 pvc valves Industrial Ball Valves - Teflon - Viton - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve /2 P.O.A 3/4 Ball Valve /4 $ Ball Valve $ /4 Ball Valve /4 $ /2 Ball Valve /2 $ Ball Valve P.O.A 2 1/2 Ball Valve /2 P.O.A 3 Ball Valve P.O.A 4 Ball Valve P.O.A CPVC Industrial Ball Valves - Teflon - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve /2 P.O.A. 3/4 Ball Valve /4 P.O.A. 1 Ball Valve P.O.A. 1 1/4 Ball Valve /4 P.O.A. 1 1/2 Ball Valve /2 P.O.A 2 Ball Valve $ /2 Ball Valve /2 P.O.A. 3 Ball Valve P.O.A. 4 Ball Valve P.O.A. CPVC Industrial Ball Valves - Teflon - Viton - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Ball Valve /2 P.O.A 3/4 Ball Valve /4 P.O.A 1 Ball Valve P.O.A 1 1/4 Ball Valve /4 P.O.A 1 1/2 Ball Valve /2 P.O.A 2 Ball Valve P.O.A 2 1/2 Ball Valve /2 P.O.A 3 Ball Valve P.O.A 4 Ball Valve P.O.A 116 All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

55 pvc & Check valves Uniblock Ball Valves Product Code Pipe Size (DN) List Price 3/4 Uniblock Ball Valve /4 $ Uniblock Ball Valve $31.61 Spring Check Valves - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Spring Check Valve mm $ mm Spring Check Valve mm $ mm Spring Check Valve mm $ mm Spring Check Valve mm $ mm Spring Check Valve mm $ mm Spring Check Valve mm $ mm Spring Check Valve mm $ mm Spring Check Valve mm $ mm (ND 80mm) Spring Check Valve mm (ND 80mm) $ Spring Check Valves - EPDM - BSPF Thread Product Code Pipe Size (DN) List Price 1/2 Spring Check Valve /2 P.O.A 3/4 Spring Check Valve /4 $ Spring Check Valve $ /4 Spring Check Valve /4 $ /2 Spring Check Valve /2 $ Spring Check Valve $ /2 Spring Check Valve /2 $ Spring Check Valve $ (DN 3 ) Spring Check Valve (DN 3 ) $ Foot Valves - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Foot Valve mm P.O.A 20mm Foot Valve mm $ mm Foot Valve mm P.O.A 32mm Foot Valve mm P.O.A 40mm Foot Valve mm P.O.A 50mm Foot Valve mm $ mm Foot Valve mm $ mm Foot Valve mm $ mm (ND 80mm) Foot Valve mm (ND 80mm) $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

56 pvc & Check valves Ball Check Valves - EPDM - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Check Valves mm $ mm Ball Check Valves mm $ mm Ball Check Valves mm $ mm Ball Check Valves mm $ mm Ball Check Valves mm $ mm Ball Check Valves mm $96.04 Ball Check Valves - Viton - Solvent Socket Product Code Pipe Size (DN) List Price 15mm Ball Check Valve mm $ mm Ball Check Valve mm $ mm Ball Check Valve mm $ mm Ball Check Valve mm $ mm Ball Check Valve mm $ mm Ball Check Valve mm $ Wafer Check Valves - EPDM - O ring Seal - No gasket required Product Code Pipe Size (DN) List Price 65mm Swing Check Valve mm $ mm Swing Check Valve mm $ mm Swing Check Valve mm $ mm Swing Check Valve mm $ mm Swing Check Valve mm $ Butterfly Valves - EPDM - Zinc Plated Shaft - Classic Product Code Pipe Size (DN) List Price 50-65mm (2-2 1/2 ) Butterfly Valve mm (2-2 1/2 ) $ mm (3 ) Butterfly Valve mm (3 ) $ mm (4 ) Butterfly Valve mm (4 ) $ mm (5 ) Butterfly Valve mm (5 ) $ mm (6 ) Butterfly Valve mm (6 ) $ mm (8 ) Butterfly Valve mm (8 ) $ mm (10 ) Butterfly Valve mm (10 ) $1, All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

57 pvc valves Butterfly Valves - EPDM - Stainless Steel Shaft - Classic Product Code Pipe Size (DN) List Price 50-65mm (2-2 1/2 ) Butterfly Valve mm (2-2 1/2 ) $ mm (3 ) Butterfly Valve mm (3 ) $ mm (4 ) Butterfly Valve mm (4 ) $ mm (5 ) Butterfly Valve mm (5 ) $ mm (6 ) Butterfly Valve mm (6 ) $ mm (8 ) Butterfly Valve mm (8 ) $ mm (10 ) Butterfly Valve mm (10 ) $1, Butterfly Valves - Viton - Stainless Steel Shaft - Classic Product code Pipe Size (DN) List Price DN = normal Bore of Pipe 50-65mm (2-2 1/2 ) Butterfly Valve mm (2-2 1/2 ) P.O.A 80mm (3 ) Butterfly Valve mm (3 ) $ mm (4 ) Butterfly Valve mm (4 ) $ mm (5 ) Butterfly Valve mm (5 ) P.O.A 150mm (6 ) Butterfly Valve mm (6 ) $1, mm (8 ) Butterfly Valve mm (8 ) P.O.A 250mm (10 ) Butterfly Valve mm (10 ) $1, Butterfly Valves - EPDM - Stainless Steel Shaft - Industrial Product code Pipe Size (DN) List Price DN = normal Bore of Pipe 63-75mm Butterfly Valve mm P.O.A. 90mm Butterfly Valve mm P.O.A. 110mm Butterfly Valve mm P.O.A mm Butterfly Valve mm P.O.A. 160mm Butterfly Valve mm P.O.A mm Butterfly Valve mm P.O.A Butterfly Valves - EPDM - Stainless Steel Shaft - with Gear Box - Industrial Product code Pipe Size (DN) List Price DN = normal Bore of Pipe 63-75mm Butterfly Valve mm P.O.A. 90mm Butterfly Valve mm P.O.A. 110mm Butterfly Valve mm P.O.A mm Butterfly Valve mm P.O.A. 160mm Butterfly Valve mm $ mm Butterfly Valve mm $1, mm Butterfly Valve mm $3, mm Butterfly Valve mm $5, All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September

58 pvc Pipes PVC Pipes Sold in 6 meter lengths Product Code List Price per meter PVC PIPE 40MM PN9 U-PVC-WHITE $12.26 PVC PIPE 50MM PN9 U-PVC-WHITE $18.75 PVC PIPE 80MM PN9 U-PVC-WHITE $54.54 PVC PIPE 100MM PN9 U-PVC-WHITE $66.38 PVC PIPE 150MM PN9 U-PVC-WHITE $66.97 PVC PIPE 200MM PN9 U-PVC-WHITE $ PVC PIPE 20MM PN12 U-PVC* $9.19 PVC PIPE 40MM PN12 U-PVC WHITE $17.74 PVC PIPE 50MM PN12 U-PVC WHITE $24.38 PVC PIPE 65MM PN12 U-PVC WHITE $63.14 PVC PIPE 80MM PN12 U-PVC - WHITE* $80.37 PVC PIPE 100MM PN12 U-PVC-WHITE* $82.86 PVC PIPE 125MM PN12 U-PVC - WHITE $72.30 PVC PIPE 150MM PN12 U-PVC-WHITE $ PVC PIPE 200MM PN12 U-PVC-WHITE $ PVC PIPE 225MM PN12 U-PVC-WHITE $ PVC PIPE 250MM PN12 U-PVC-WHITE $ PVC PIPE 300MM PN12 U-PVC-WHITE $ PVC Solvent Cement for Pipes 100mm and over Product Code List Price LARGE BORE PRESSURE CEMENT 4L $ LARGE BORE PRIMING FLUID PURPLE 4L $ All prices are subject to 10% GST, or applicable rate as advised. Product Catalogue effective September 2016.

59 ASTRALPOOL AUSTRALIA PTY LTD TERMS AND CONDITIONS OF TRADE 1. Definitions In these terms: ACL means the Australian Consumer Law Schedule of the Competition and Consumer Act; Agreement means any agreement for the provision of goods or services by the Supplier to the Customer; consumer is as defined in the ACL and in determining if the Customer is a consumer, the determination is made if the Customer is a consumer under the Agreement; Customer means the person, jointly and severally if more than one, acquiring goods or services from the Supplier; Goods means goods supplied by the Supplier to the Customer; GST means the goods and Services tax as defined in A New Tax System (goods and Services Tax) Act 1999 as amended; PPSA means the Personal Property Securities Act 2009 (Cth). Retailer means any person or organization to whom a Customer supplies goods or services supplied to it by the Supplier that is not an end-user consumer of the goods or services. Supplier means AstralPool Australia Pty Ltd (ABN ); Supplier s Intellectual Property includes any and all intellectual and industrial property rights throughout the world owned by the Supplier or any of its Related Bodies Corporate, whether subsisting now or in the future, including (a) rights of any kind in inventions, discoveries and novel designs, (b) literary works, and any other works or subject matter in which copyright (including future copyright and rights in the nature of or analogous to copyright) may, or may in the future, subsist, including photographic images of the goods, (c) confidential information, trade secrets and know-how, (d) registered and unregistered trade marks and service marks (including logos), and (e) internet domain names. Related Bodies Corporate has the meaning provided in the Corporations Act 2001 (Cth); Services means services supplied by the Supplier to the Customer; and Terms means these Terms and Conditions of Trade. 2. Basis of Agreement 2.1 Unless otherwise agreed by the Supplier in writing, the Terms apply exclusively to every Agreement and cannot be varied or replaced by any other terms, including the Customer s terms and conditions of purchase (if any). 2.2 Any quotation provided by the Supplier to the Customer for the proposed supply of goods or services is: (a) valid for 30 days; (b) an invitation to treat only; and (c) only valid if in writing. 2.3 The Terms may include additional terms in the Supplier s quotation, which are not inconsistent with the Terms. 2.4 An Agreement is accepted by the Supplier when the Supplier accepts, in writing or electronic means, an offer from the Customer or provides the Customer with the goods or services. 2.5 The Supplier in its absolute discretion may, for any reason, refuse to accept any offer or order for goods and services by the Customer, including (without limitation), for a breach, or suspected breach of the Customer of any of the Terms. 2.6 The Customer must provide the Supplier with its specific requirements, if any, in relation to the goods and services. 2.7 The Customer must not offer the goods for sale over the Internet or directly though its website without express prior written consent from the Supplier. 2.8 The Customer must not, without the prior written consent of the Supplier, use any of the Supplier Intellectual Property. If Supplier does provide written consent to the Supplier to use any of the Supplier Intellectual Property, this consent may be granted subject to whatever restrictions, limitations and guidelines imposes by the Supplier from time to time (including without limitation, the Supplier s Product and Brand Advertising Guide), and consent may be withdrawn by the Supplier at any time at its absolute discretion The Customer acknowledges that included in the Supplier s goods are a number of goods of a highly technical nature, and the Customer warrants that it has the requisite knowledge and skill regarding their correct application, installation and operation. The Customer agrees to ensure the correct application, installation and operation of the goods for any of its customers, and to provide all necessary technical advice and information to prevent damage to the goods.: 2.10 The Supplier may vary or amend these Terms by written notice to the Customer at any time. Any variations or amendments will apply to orders placed after the notice date. 3. Pricing 3.1 Prices quoted for the supply of goods and services exclude GST and any other taxes or duties imposed on or in relation to the goods and services. 3.2 If the Customer requests any variation to the Agreement, the Supplier may increase the price to account for the variation. 3.3 Where there is any change in the costs incurred by the Supplier in relation to goods or services, the Supplier may vary its price for the goods or services to take account of any such change at any time without prior notice to the Customer. 4. Payment 4.1 Unless otherwise agreed in writing: (a) Subject to 4.1(b), payment for the goods or services must be made in full within 30 days from end of month of the Supplier s invoice. (b) The Supplier reserves the right to require payment in full on delivery of the goods or completion of the services. 4.2 Payment by cheque is not deemed made until the proceeds of the cheque have cleared. 4.3 Payment terms may be revoked or amended at the Supplier s sole discretion immediately upon giving the Customer written notice. 5. Payment Default 5.1 If the Customer defaults in payment by the due date of any amount payable to the Supplier, then all money which would become payable by the Customer to the Supplier at a later date on any account, becomes immediately due and payable without the requirement of any notice to the Customer, and the Supplier may, without prejudice to any of its other accrued or contingent rights: (a) charge the Customer interest on any sum due at the prevailing rate pursuant to the Penalty Interest Rates Act 1983 (Vic) plus 4 per cent for the period from the due date until the date of payment in full; (b) charge the Customer for, and the Customer must indemnify the Supplier from, all costs and expenses (including without limitation all legal costs and expenses) incurred by it resulting from the default or in taking action to enforce compliance with the Agreement or to recover any goods; (c) cease or suspend supply of any further goods or services to the Customer; (d) by written notice to the Customer, terminate any uncompleted contract with the Customer. 6. Passing of Property 6.1 Until the Supplier receives full payment in cleared funds for all goods and services supplied by it to the Customer, as well as all other amounts owing to the Supplier by the Customer: (a) title and property in all goods remain vested in the Supplier and do not pass to the Customer; (b) the Customer must keep the goods separate from its goods and maintain the Supplier s labelling and packaging; (c) the Supplier may without notice, enter any premises where it suspects the goods are and remove them, notwithstanding that they may have been attached to other goods not the property of the Supplier, and for this purpose the Customer irrevocably licences the Supplier to enter such premises and also indemnifies

60 the Supplier from and against all costs, claims, demands or actions by any party arising from such action. 6.2 Without limiting clause 6.1, all payments received from the Customer must be applied in accordance with section 14(6)(c) of the PPSA. The Customer agrees that legal title and property in the goods is retained by the Supplier until payment is received in cleared funds from the Customer of all sums owing to the Supplier, whether under this Agreement or otherwise. The Customer must keep the goods separate from other goods and store the goods so that they are readily identifiable as those supplied by the Supplier. The Customer must not sell the goods except in the ordinary course of the Customer s business. If the Customer fails to pay by the due date any amount owing to the Supplier, the Supplier may (without prejudice to any of its other rights) recover and resell any of the goods in which property has not passed to the Customer. In addition to any rights the Supplier may have under Chapter 4 of the PPSA, the Supplier may, without notice, enter any premises where it expects the goods may be located and remove them without committing a trespass, and the Customer authorises the Supplier to enter onto the premises where the goods are kept to take possession of the goods for that purpose at any time. The Customer also indemnifies the Supplier from and against all loss suffered and or incurred by the Supplier as a result of exercising its rights under this clause 6.2. If there is any inconsistency between the Supplier s rights under this clause 6.2 and its rights under Chapter 4 of the PPSA, this clause 6.2 prevails. The Customer acknowledges and warrants that the Supplier has a security interest (for the purposes of the PPSA) in the goods and any proceeds until title passes to the Customer in accordance with this clause 6.2. The Customer must do anything reasonably required by the Supplier to enable the Supplier to register its security interest with the priority the Supplier requires and to maintain that registration. The security interest arising under this clause 6.2 attaches to the goods when the Customer obtains possession of the goods and the parties confirm that they have not agreed that any security interest arising under this clause attaches at any later time. If Chapter 4 of the PPSA would otherwise apply to the enforcement of the security interest created under this Agreement, the Customer agrees that the following provisions of the PPSA will not apply; section 95 (notice of removal of accession) to the extent that it requires the Supplier to give a notice to the Customer; section 121(4) (enforcement of liquid assets notice to grantor); section 130 (notice of disposal), to the extent that it requires the Supplier to give a notice to the Customer; paragraph 132(3)(d) contents of statement of account after disposal); subsection 132(4) (statement of account if no disposal); section 135 (notice of retention); section 142 (redemption of collateral); section 143 (reinstatement of security agreement). The Supplier does not need to give the Customer any notice under the PPSA (including a notice of verification statement) unless the notice is required by the PPSA and that requirement cannot be excluded. 7. Risk and Insurance 7.1 The risk in the goods and all insurance responsibility for theft, damage, loss or otherwise will pass to the Customer immediately on the goods being delivered to the Customer or taken from the Supplier s premises. 7.2 The goods are sold to the Customer on the basis that the Customer has obtained all necessary licenses or permits under all relevant laws and regulations in relation to the goods. 8. Performance of Agreement 8.1 Any period or date for delivery of goods or provision of services stated by the Supplier is an estimate only and not a contractual commitment. 8.2 The Supplier will use its reasonable endeavours to meet any estimated dates for delivery of the goods but will not be liable for any loss or damage suffered by the Customer or any third party for failure to meet any estimated date. 8.3 If the Supplier cannot complete the services by any estimated date, it will complete the services within a reasonable time. 9. Delivery 9.1 Subject to clause 9.6, the Supplier will arrange for the delivery of the goods to the Customer. 9.2 The Customer will be responsible for all costs associated with delivery, including freight, insurance and other charges arising from the point of dispatch of the goods to the Customer at the point of delivery. 9.3 The Customer authorises the Supplier to subcontract delivery of goods or services in its absolute discretion. 9.4 The Supplier may make part delivery of goods or provision of services and the Supplier may invoice the Customer for the goods or services provided The Customer indemnifies the Supplier against any loss or damage suffered by the Supplier, its sub-contractors or employees as a result of delivery, except where the Customer is a consumer and the Supplier has not used due care and skill. 9.6 If agreed the Customer may collect the goods directly from the Supplier. 10. Liability 10.1 If the Customer supplies goods or services to Retailers, it will ensure that the Retailers will comply with the Terms, and will be remain responsible for all acts, omissions, defaults and neglects of any Retailer as if they were the Customer s acts, omissions, defaults or neglects. The Customer will indemnify and hold harmless the Supplier against all loss, liability, damages, costs and all expenses, including legal fees, arising directly or indirectly out of a failure by a Retailer to whom it supplies goods or services to comply with the Terms Except as the Terms specifically state, or as contained in any warranty statement provided in relation to the goods or services, the Agreement does not include by implication any other term, condition or warranty in respect of the quality, merchantability, acceptability, fitness for purpose, condition, description, assembly, manufacture, design or performance of the goods or services or any contractual remedy for their failure If the Customer is a consumer nothing in these Terms restricts, limits or modifies the Customer s rights or remedies against the Supplier for failure of a statutory guarantee under the ACL If the Customer on-supplies the goods to a person who is a consumer: (a) if the goods or services are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then the amount specified in section 276A(1) of the ACL is the absolute limit of the Supplier s liability to the Customer; (b) otherwise, payment of any amount required under section 274 of the ACL is the absolute limit of the Supplier s liability to the Customer; howsoever arising under or in connection with the sale, installation, use of, storage or any other dealings with the goods or services by the Customer or any third party If clause 10.2 and 10.3 do not apply, then other than as stated in the Terms or any written warranty statement the Customer assumes all risk and liability for loss, damage or injury to persons or to property of the Customer, or third parties arising out of the use, installation or possession of any of the goods sold by the Supplier, whether direct, indirect or consequential,unless recoverable from the Supplier on the failure of any statutory guarantee under {D :1}Form the ACL The Customer acknowledges that it has the sole responsibility of satisfying itself that the goods or services are suitable for the use of the Customer. 11. Cancellation 11.1 If the Supplier is unable to deliver or provide the goods or services, then it may cancel the Customer s order (even if it has been accepted) by written notice to the Customer No purported cancellation or suspension of an order or any part of it by the Customer is binding on the Supplier once the order has been accepted If the Customer purports to cancel an order and the Supplier agrees to the cancellation, any deposit paid by the customer will be forfeited. 12. Returns and Exchanges 12.1 Subject to clause 12.2 and 12.6, the Supplier will not be liable for any shortages, damage or non-compliance with the specifications in the Agreement unless the Customer notifies the Supplier with full details and description within 10 days of delivery otherwise the Customer is deemed to have accepted the goods When any shortages, claim for damaged goods or noncompliance with the Agreement specifications is accepted by the Supplier, the Supplier may, at its option, replace the goods, or refund

61 the price of the goods Subject to clause 12.6, the Supplier will not under any circumstances accept goods for return that: (a) have been specifically produced, purchased or otherwise acquired to fulfill the Agreement; (b) are discontinued goods or no longer stocked by the Supplier; (c) have been altered in any way; (d) have been used; or (e) are not in their original condition and packaging If the Supplier accepts goods for return for reason other than a failure of the statutory guarantees under the ACL, the Customer will receive a credit for the returned goods equal to the price charged by the Supplier less a 15% deduction for handling and restocking charges The Customer must; (a) obtain the Supplier s prior written approval for return of goods; and (b) pay all freight charges and costs associated with return of goods unless recoverable from the Supplier on the failure of any statutory guarantee under the ACL If the Customer is a consumer, nothing in this clause 12 limits any remedy available for a failure of the guarantees in sections 56 and 57 of the ACL. 13. Customer Restructure 13.1 The Customer must notify the Supplier in writing of any change in its structure or management including any change in director, shareholder or management or change in partnership or trustee within 7 days of the date of any such change. 14. Force Majeure 14.1 The Supplier is not liable in any way howsoever arising under the Agreement to the extent that it is prevented from acting by events beyond its reasonable control including, without limitation, industrial disputes, strikes, lockouts, accident, breakdown, import or export restrictions, acts of God, acts or threats of terrorism, or war. If an event of force majeure occurs, the Supplier may suspend or terminate the Agreement by written notice to the Customer. 15. Miscellaneous 15.1 The law of Victoria from time to time governs the Terms. The parties agree to the non-exclusive jurisdiction of the courts of Victoria, the Federal Court of Australia, and of courts entitled to hear appeals from those Courts The Supplier s failure to enforce any of these Terms shall not be construed as a waiver of any of the Supplier s rights Nothing in the Terms is to be interpreted as excluding, restricting or modifying or having the effect of excluding, restricting or modifying the application of any State or Federal legislation applicable to the sale of goods or supply of services which cannot be excluded, restricted or modified 15.4 If any Term is unenforceable it shall be read down to be enforceable or, if it cannot be read down, the term shall be severed from the Terms without affecting the enforceability of the remaining terms The Customer must comply with the Privacy Act 1988 (Cth), the Australian Privacy Principles and any other relevant privacy laws in connection with any personal information supplied to it or provided to the Supplier in connection with this Agreement. Product specifications and dimensions are subject to change without notice.

62 HEAD OFFICE 111 Indian Drive Keysborough, VIC 3173 P: F: Melbourne Cyber Loop Dandenong, VIC 3175 P: F: Townsville 17 Auscan Crescent Garbutt, QLD 4814 P: F: Sydney - SEVEN HILLS 2/2 Welder Road Seven Hills NSW 2147 [email protected] P: F: SYDNEY - MOOREBANK 6/30 Heathcote Road Moorebank, NSW 2170 [email protected] P: F: Adelaide 20 Marlow Street, Keswick, SA 5035 [email protected] P: F: Brisbane 12 Breene Place, Morningside, QLD 4170 [email protected] P: F: Perth 17 Tacoma Circuit Canning Vale, WA 6155 [email protected] P: F: Gold COAst 1/28 Export Drive Molendinar, QLD 4214 [email protected] P: F: Prices effective September 2016