solenoid dosing pumps

Transcription

1 teknaevo soenoid dosing pumps innovation > technoogy > future

2 The evoution of soenoid dosing pumps Cever Just Modes, Just PVDF, A functions in one pump modes that cover 0, to /h with an output pressure up to 0 Bar 1 Casing aows skids to be preconstructed, as the fixing points remain constant, and the pumps can be seected on confirmation of the dosing fow evo Inventory Reduction Reduce spares stock hoding Mode Fow rate from 0, to 0 /h from 0 to /h 80 Compatibe PVDF pump head and ceramic ba vave as standard PVDF is suitabe for amost a chemica used in the Industria, Waste Water Treatment and potabe Water appications The use of Ceramic bas as standard improves the pumping reiabiity and the chemica compatibiity of the whoe iquid end evo Fu chemica compatibiity seko water & industry > tekna evo series soenoid dosing pumps

3 Reiabe Long ife diaphragm tested to give years working ife The advanced design and manufacturing process aows the diaphragm to have a unique ife expectancy Made of pure soid PTFE, the diaphragm is compatibe with most chemicas The diaphragm has been tested over a period of years giving superior resuts Routine diaphragm repacement is no onger a requirement evo Reduced maintenance Fu chemica compatibiity Steady Dosing Performance Stabiized Muti Power Suppy 0 0 Vac 0/0 Hz with reduced consumption Reduced power consumption as the soenoid ony draws the required power to activate the pump, based on the working conditions evo Stabe dosing performance: improve pump efficiency as performance is not affected by power suppy fuctuations Reduce inventory hoding Intuitive programming A new concept of programming menu Programming menu are sef expanatory and avaiabe in anguages Inteigent Dispay, once a function is seected the pump wi ony dispay the parameters to set, which are inked to the seected function evo Reduced programming time innovation > technoogy > future

4 Range Anaogue Version AKL [costant dosage] Anaogue dosing pump with constant fow rate manuay adjustabe by contro dia on the front pane, two frequency range (0 0% or 0 0%), PowerON ed indicator and eve contro input. APG [proportiona dosage] Anaogue dosing pump with constant fow rate manuay adjustabe, proportiona fow rate according to an externa anaogue ( 0 ma) or digita puse signa (e.g. from water meter). n Contro dia (percentage and "n" vaue in mutipication mode) n position adjustabe switch: in division mode (1,, = n) 1 in mutipication mode (n=1) 1 for proportiona 0 ma signa 1 for constant functionaity n pacing function adjustabe by dip switch ATL [timed dosage] Anaogue dosing pump with constant fow rate manuay adjustabe and timed dosage with T ont off doube reguation. n contro dias (fow rate percentage T on reguation T off reguation) seko water & industry > tekna evo series soenoid dosing pumps

5 Range Digita Version TPG [proportiona dosage] Digita dosing pump with constant fow rate manuay adjustabe, proportiona fow rate according to an externa anaog ( 0 ma) or digita puse signa (e.g. from water meter). This digita version of the APG, incudes additona characteristics: Timer function, ppm dosing, statistics, password and On/Off input (remote switch). TPR [proportiona dosage] Digita dosing pump with ph/redox contro meter buit in. n Digita interface for constant or proportiona dosing, depending on the measured ph or Rx vaue n PT0 probe input for therma compensation n Repetition aarm reay n Input OnOff for remote contro n 0 ma output for measure transmission TMP proportiona dosage Digita dosing pump with Chorine, Hydrogen Peroxide or PerAcetic Acid contro meter buit in. n Instrument on board set via Software n PT0 probe input for therma compensation n Repetition aarm reay n Input OnOff for remote contro n 0 ma output for measure transmission TCK timed dosage Digita dosing pump with constant fow rate manuay adjustabe, or timer contro. n Programmabe timed reay innovation > technoogy > future

6 Code Version AKL APG ATL TPG TPR TMP TCK Anaogue Digita Mode Anaogue dosing pump with constant fow rate manuay adjustabe Anaogue dosing pump with constant fow rate manuay adjustabe, with proportiona fow rate according to an externa anaog ( 0 ma) or digita signa (water meter) Anaogue dosing pump with constant fow rate manuay adjustabe and timed dosage with T ont off doube regoation Digita dosing pump with constant fow rate manuay adjustabe, with proportiona fow rate according to an externa anaog ( 0 ma) or digita signa (water meter) Digita dosing pump with ph/redox contro meter buit in Digita dosing pump with Chorine, Hydrogen Peroxide or PerAcetic Acid contro meter buit in Digita dosing pump with constant fow rate or timed Pressure [bar] ,1 Fow rate [/h] 0, 0,8 1, 1,, Power suppy N 0 0 Vac O 8 Vac (For AKL 0 series ony. For APG 0: 08Vac/Vdc) Liquid contact materias 00 Hz Pump head Connections Bas Diaphragm H PVDF PVDF Ceramic PTFE Instaation Kit H Fequency max [stroke/min] PVDF Seas 0 FPM 1 EPDM Options 000 Stroke capacity [cc/stroke] 0,0 0,11 0,17 0,1 0, 0, 0, 0, 0, 0,8 0,9 0, 0,8 1,00 1,11 1,9,11,00 Ø Connections IN / OUT [mm] / suc. / 7 dis. / suc. / 7 dis. / / 8 / 1 Standard Consumption [W] 1, 1,0 1,,9, AKL 00 N H H seko water & industry > tekna evo series soenoid dosing pumps

7 Fow Rate and Dimensiona Drawings Fow Rate [/h ] Pressure [bar ] Pressure [bar] ,1 Fow rate [/h] 0, 0,8 1, 1,, Dimension [mm] Mode A (Height) B (Width) C (Depth) D (Max Height) innovation > technoogy > future 7

8 Typica Instaation Degassing head instaation Puseemitter water meter Backpressure vave Mutifuction vave Fow Sensor Primingaid With contro instrument Mixer Tank Suction devices 8 seko water & industry > tekna evo series soenoid dosing pumps

9 Accessories Puseemitter water meters n Threaded water meters n Fanged water meters The meters wich we offer have high precision and sensitivity according to CEE standard requirements. Their pastic and metaic parts, in particuar those in contact with water, compy with current reguations and are subject to extensive checks and contros. Threaded water meters TC1 Series TH1 Series TC0 Series +% +% 0 % 0 Qmin Qt Qn Qmax n Singejet water meters with puse sender n Dry dia n Roer reading n or 1 puse/ n Cod water up to 0 C n Connections: from ½"(1 mm) to (0 mm) Fanged water meters FC Series n A high capacity heica vane (Wotmann) type water meter n Dry dia reading n Puse sender n Singejet water meters with puse sender n Dry dia n Roer reading n or 1 puse/ n Hot water up to 90 C n Connections: from ½"(1 mm) to (0 mm) n Singejet water meters without puse sender n Dry or wet dia n Roer reading n Cod water up to 0 C n Connections: from ½"(1 mm) to (0 mm) n Cod water up to 0 C n Connections: from "(DN0) to (DN 10) % head oss by metres of water coumn +% +% 0 % % 7, 1, 1 0 Qmin Qt TYPICAL ACCURACY CURVE HEAD LOSS DIAGRAM DN mm ,7 0, 1 0, 0, Qn fow rate (m /h) Qmax TYPICAL ACCURACY CURVE Size mm DN Inch Max fow (short period) Qmax m /h Nomina fow Qn m /h Min fow Qmin /h (accuracy ±%) m /h Transition fow Qt /h (accuracy ±%) m /h Maximum reading m Starting fow m Weight kg 1 ½ 1, ¾, , ¼ ½ , 000 0, 1, ½ 0 0, 000 0, , , 1, , , 19, ,7 0 innovation > technoogy > future 9

10 Accessories Tanks, Mixers and Suction devices n Tanks n Uncovered Tanks n Reinforcement n Fast Mixers (100 rpm) n Sow mixers (00 RPM) n Suction device without eve probe n Suction device with eve probe Tanks in poyethyene Our tanks are designed to assembe dosing systems with mixers and motor driven pumps or soenoid dosing pumps. A are made from foodsafe poyethyene, resistant to amost a chemicas normay encountered. Mode Capacity () Height (cm) SER 0 0, SER 0 0 SER SER SER , SER Reinforcement Tank reinforcement made of PVC (0 mm thick) to be used to insta mixers and motor driven pumps or soenoid dosing pumps on tanks SER series. Diameter (cm) 0 9, 7 7 8, Mode Tank SML 0 SER 0 SML 0 SER 0 SML 00 SER 00 SML 00 SER 00 SML 00 SER 00 Mixers Eectric mixers threephases or singephase, sow (00 rpm) or fast (100 rpm) and fange attachment, for tanks SER series. Shaft (mm) Propeer (mm) Fast (100 rpm) Sow (00 rpm) 0 Suction Devices 10 0 Motor (kw) 0,1 Materia PVC SS 1 Tank Mode SER 0 SER 0 SER 00 SER 00/00 A suction fiter is provided to protect pump vaves from debris or partices that coud obstruct the pump vave. Suction devices can aso be suppied with integra eve contros. These aow the use of aarms, and protect against the system running dry. n Easy to insta n Standard FPM seas (EPDM upon request) n Made of PCV with cear PVC suction tubing n A suction devices are provided with a foot fiter n A suction devices are provided with a non return vave Uncovered Tanks in Poyethyene Designed to contain our tanks SER series. Mode Height (cm) Diameter (cm) Tank Mode T10 7, 1 SER 0 T00 87, 7 SER 0 T SER 00 T SER 00 T SER 00 Dimensions (mm) Length x Ø 0 x 0 x 0 x 0 x 900 x 900 x 0 x 0 x 10 x 10 x / tube 8/1 tube Tank Mode SER 0 SER 0 SER 0 SER 00 SER 00/00 seko water & industry > tekna evo series soenoid dosing pumps

11 Accessories Vaves, Sensors and Primingaid n HYC backpressure vaves n HYM Muti vave n HYS Safety vaves n Injection vaves n Fow Sensor n Fixed / Adjustabe backpressure vaves n Primingaid n Mutifunction vave n Pump Head with automatic degassing vave HY Series adjustabes vaves Diaphragm Connections Injection vaves Seas PVC FPM (standard) or EPDM (upon request) 1/ Gm, / and 8/1 tube Fow rate max. 0 /h Pressure max. bar Temperature max. 0 C PVC FPM (standard) or EPDM (upon request) IN 1/ Gm, / and Connections 8/1 tube OUT 1/ Gm Fow rate max. 0 /h Pressure max. bar Temperature max. 0 C Fow Sensor In order to assess the actua dosing phase, the fow sensor can be used to detect the pump s pusations during the deivery phase: the sensor can aso be used to determine the actua dosing fow rate. This fow sensor is fitted directy on the deivery vave on the dosing pump. PVC Seas FPM Pressure max. bar Temperature max. 0 C Fixed / Adjustabe backpressure vaves The accuracy of the soenoid pumps can be affected by the variation of deivery pressure, especiay between 0 and 1 bar. Using the backpressure vave you can guarantee a constant dosing and avoid siphoning cases when metering in the tank. Moreover, dosing with a backpressure avoids to create siphoning phenomena of the pump. PVC PVDF Diaphragm / FPM EPDM Seas IN / tube Connections OUT /8 G 1/ G Fixed 1, bar Backpressure Adjustabe 0, bar Temperature max. 0 C Primingaid Priming probems may occur on dosing pumps with a ow fow rate, and aso in case of excessive suction heights in reation to the pump s capacity. This accessory is abe to resove these probems. Where possibe it is fitted at the same height as the pump s intake vave and a short distance from it. PVC Seas FPM Connections / tube 8/1 tube Mode 00 m Temperature max. 0 C Mutifunction vave Mutifunction vave acts as: a backpressure vave, an antisiphoning vave, a overpressure vave, a priming vave, a deivery drain vave (for maintenance). Mutifunction vave is fitted directy on the deivery vave on the dosing pump. PVC PVDF Diaphragm PTFE Connections / tube Backpressure 1, bar Overpressure bar 1 bar Temperature max. 0 C Pump head with automatic degassing vave It aows to resume the right dosing without any intervention from the user, in case you meter some products generating gases. Seas Bas Connections PVC FPM Ceramic / tube Fow rate reduction max. 0% Temperature max. 0 C Bear in mind: to be excusivey used combined with 0 and series pumps. innovation > technoogy > future 11

12 A Wordwide Group at your service For more information BRAZIL Seko do Brasi Commercio de Sistemas de Dosagem Limitada São Pauo (SP) Phone: Fax: sekobrasi@sekobrasi.com.br CHINA Seko China Ltd 0770 Hebei Phone: Fax: china@seko.com DENMARK Seko Denmark DK90 Maribo Phone: Fax: info@seko.com FRANCE Seko LefrancBosi S.A. 77 Marne La Vaee Cedex Phone: Fax: efrancbosi@efrancbosi.com service.commercia@seko.fr GERMANY Seko Deutschand GmbH Mainz Kaste Phone: Fax: info@sekomesstechnik.de ITALY Seko Spa Via Saaria Km. 9,00 00 S.Rufina Rieti Phone: Fax: saes@seko.com Seko Spa [Process & Sytems] Via Di Vittorio, 008 Peschiera Borromeo Miano Phone: Fax: info.psd@seko.com info@seko.com ROMANIA Seko Sieta S.r CujNapoca Phone: Fax: +0 1 info.dpro@seko.com RUSSIA OOO Seko 197 Moscow Phone: Fax: sekorussia@seko.com SINGAPORE Seko Dosing Systems Asia Pacific Pte Ltd 0888 Singapore Phone: Fax: asiapacific@seko.com SOUTH AFRICA Seko Southern Africa (PTY) Ltd Kyasand Johannesburg Gauteng Phone: Fax: saes@sekosa.co.za SPAIN Seko Ibérica Sistemas de Dosificación S.A San Juast Desvern Barceona Phone: Fax: sekoiberica@sekoiberica.com SWEDEN Seko Sweden 1 Landskrona Phone: Fax: info@seko.com TURKEY Seko Endüstriye Pompaar ve Proses Sistemeri San. ve Tic. Ltd. Şti. Karta Istanbu Phone: Fax: info@seko.com.tr UNITED KINGDOM Seko UK Chemica Contros Ltd Harow, Essex CM19 JH Phone: Fax: seko.uk@seko.com USA Seko Dosing Systems Corporation USA Tuytown PA (USA) Phone: Fax: saes@sekousa.com The technica data may be atered without prior warning. The drawings and images are for iustrative purposes ony. seko spa / Printed in Itay /BROTKNUK11