Tekna Evo SOLENOID DOSING METERING PUMPS. innovation > technology > future

Transcription

1 Tekna Evo SOLENOID DOSING METERING PUMPS innovation > technoogy > future

2 The Evo ution of soenoid dosing pumps A new concept of programming menu. Once a function is seected, the pump dispays ony the parameters that are associated with the specific function PVDF pump head and ceramic ba vave as standard Stabiized Muti Power Suppy 0 20 Vac 50/60 Hz with reduced consumption Compatibe PVDF pump head and ceramic ba vave as standard PVDF is suitabe for amost a chemica used in the Industria, Waste Water Treatment and potabe Water appications The use of Ceramic bas as standard improves the pumping reiabiity and the chemica compatibiity of the whoe iquid end evo Fu chemica compatibiity Reiabe Long ife diaphragm tested to give 5 years working ife The advanced design and manufacturing process aows the diaphragm to have a unique ife expectancy Made of pure soid PTFE, the diaphragm is compatibe with most chemicas The diaphragm has been tested over a period of 5 years giving superior resuts Routine diaphragm repacement is no onger a requirement evo Reduced maintenance Fu chemica compatibiity 02 seko > water & industry > Soenoid dosing metering pumps

3 Cever Just 5 Modes, Just PVDF, A functions in one pump 5 modes that cover 0, to 5 /h with an output pressure up to 20 Bar 1 Casing aows skids to be preconstructed, as the fixing points remain constant, and the pumps can be seected on confirmation of the dosing fow evo Inventory Reduction Reduce spares stock hoding Steady Dosing Performance Stabiized Muti Power Suppy 0 20 Vac 50/60 Hz with reduced consumption evo Reduced power consumption as the soenoid ony draws the required power to activate the pump, based on the working conditions Stabe dosing performance: improve pump efficiency as performance is not affected by power suppy fuctuations Reduce inventory hoding Intuitive programming A new concept of programming menu Programming menu are sef expanatory and avaiabe in 5 anguages Inteigent Dispay, once a function is seected the pump wi ony dispay the parameters to set, which are inked to the seected function evo Reduced programming time innovation > technoogy > future 03

4 Anaogue Version AKL Costant dosage Anaogue dosing pump with constant fow rate manuay adjustabe by contro dia on the front pane, two frequency range (0 20% or 0 0%), PowerON ed indicator and eve contro input. APG Proportiona dosage Anaogue dosing pump with constant fow rate manuay adjustabe, proportiona fow rate according to an externa anaogue ( 20 ma) or digita puse signa (e.g. from water meter). n Contro dia (percentage and "n" vaue in mutipication mode) n 6 position adjustabe switch: 3 in division mode (1,, = n) 1 in mutipication mode (n=1) 1 for proportiona 20 ma signa 1 for constant functionaity n pacing function adjustabe by dip switch ATL Timed dosage Anaogue dosing pump with constant fow rate manuay adjustabe and timed dosage with T ont off doube reguation. n 3 contro dias (fow rate percentage T on reguation T off reguation) 0 seko > water & industry > Soenoid dosing metering pumps

5 Digita Version TPG Proportiona dosage Digita dosing pump with constant fow rate manuay adjustabe, proportiona fow rate according to an externa anaog ( 20 ma) or digita puse signa (e.g. from water meter). n Timer function, ppm dosing, statistics, password and On/Off input (remote switch). TPR Proportiona dosage Digita dosing pump with ph/redox contro meter buit in. n Digita interface for constant or proportiona dosing, depending on the measured ph or Rx vaue n PT0 probe input for therma compensation n Repetition aarm reay n Input OnOff for remote contro n 20 ma output for measure transmission TMP Proportiona dosage Digita dosing pump with Chorine, Hydrogen Peroxide or PerAcetic Acid contro meter buit in. n Instrument on board set via Software n PT0 probe input for therma compensation n Repetition aarm reay n Input OnOff for remote contro n 20 ma output for measure transmission TCK Timed dosage Digita dosing pump with constant fow rate manuay adjustabe, or timer contro. n Programmabe timed reay innovation > technoogy > future 05

6 Pumps Identification Version AKL APG ATL TPG TPR TMP TCK Anaogue Digita Anaogue dosing pump with constant fow rate manuay adjustabe Anaogue dosing pump with constant fow rate manuay adjustabe, with proportiona fow rate according to an externa anaog ( 20 ma) or digita signa (water meter) Anaogue dosing pump with constant fow rate manuay adjustabe and timed dosage with T ont off doube regoation Digita dosing pump with constant fow rate manuay adjustabe, with proportiona fow rate according to an externa anaog ( 20 ma) or digita signa (water meter) Digita dosing pump with ph/redox contro meter buit in Digita dosing pump with Chorine, Hydrogen Peroxide or PerAcetic Acid contro meter buit in Digita dosing pump with constant fow rate or timed Mode Pressure [bar] Fow rate [L/h] Stroke capacity [cc/stroke] Ø Connections IN / OUT [mm] Fequency max [stroke/min] Consumption [WW] , 0,8 0,06 0,11 1,2 0,16 6 1,5 0, ,35 0,2 1,2 0, , ,2 5 0, , , , ,38 0, , , , , ,22 0,1 5 3,00 / / 6 suc. / 7 dis. 120 / / / ,2 12,0 12,2 23,9 22,9 Power suppy N O 0 20 Vac 2 8 Vac (For AKL 603 series ony. For APG 603: 308Vac/Vdc) 5060 Hz Liquid end materia H Pump head : PVDF Bas : Ceramic Diaphragm : PTFE Instaation Kit H Seas PVDF 0 FPM 1 EPDM Options 000 Standard AKL 600 N H H seko > water & industry > Soenoid dosing metering pumps

7 Fow Rate and Dimensiona Drawings Pressure in bar PERFORMANCE CURVE Mode 500 Pressure 20 6 bar Fow rate 0, 1,5 /h bar 2,5 3,0 /h bar 8,0 /h bar 7 18 /h ,1 bar 25 5 /h Fow rate iters / hour DIMENSIONS [mm] Mode A (Height) 231 B (Width) 119 C (Depth) D (Max Height) innovation > technoogy > future 07

8 Typica Instaation Puseemitter water meter Degassing head instaation Backpressure vave Mutifuction vave Fow Sensor Primingaid Mixer With contro instrument Tank Suction devices 08 seko > water & industry > Soenoid dosing metering pumps

9 Accessories Puseemitter water meters The meters wich we offer have high precision and sensitivity according to CEE standard requirements. Their pastic and metaic parts, in particuar those in contact with water, compy with current reguations and are subject to extensive checks and contros. n Threaded water meters n Fanged water meters Threaded water meters TC1 Series TH1 Series TC0 Series n Singejet water meters with puse sender n Dry dia n Roer reading n or 1 puse/ n Cod water up to 30 C n Connections: from ½"(13 mm) to 2 (50 mm) Fanged water meters FC Series n A high capacity heica vane (Wotmann) type water meter n Dry dia reading n Puse sender n Singejet water meters with puse sender n Dry dia n Roer reading n or 1 puse/ n Hot water up to 90 C n Connections: from ½"(13 mm) to 2 (50 mm) n Singejet water meters without puse sender n Dry or wet dia n Roer reading n Cod water up to 30 C n Connections: from ½"(13 mm) to 2 (50 mm) n Cod water up to 50 C n Connections: from 2"(DN50) to 6 (DN 150) +5% +2% 0 2% 5% Headoss by meters of water coumn +5% +2% 0 2% 5% ,5 2 1, Qmin Qmin Qt Qt Qn Qn Qmax TYPICALACCURACY CURVE HEADLOSS DIAGRAM DN mm ,7 0, ,5 0, fow rate [m 3 /h] Qmax TYPICAL ACCURACY CURVE Size mm DN Inch Max fow (short period) Qmax m 3 /h Nomina fow Qn m 3 /h Min fow Qmin /h (accuracy ±5%) m 3 /h Transition fow Qt /h (accuracy ±2%) m 3 /h Maximum reading m 3 Starting fow m 3 Weight kg 13 ½ 3 1, ¾ 5 2, , ¼ ½ , ,2 12, ½ , , , ,25 15, , ,3 19, ,7 0 innovation > technoogy > future 09

10 Accessories Tanks, Mixers and Suction devices n Tanks n Uncovered Tanks n Reinforcement n Fast Mixers (100 rpm) n Sow mixers (200 RPM) n Suction device without eve probe n Suction device with eve probe Tanks in poyethyene Our tanks are designed to assembe dosing systems with mixers and motor driven pumps or soenoid dosing pumps. A are made from foodsafe poyethyene, resistant to amost a chemicas normay encountered. Mode Capacity () Height (cm) SER ,5 SER SER SER SER ,5 SER Reinforcement Tank reinforcement made of PVC (20 mm thick) to be used to insta mixers and motor driven pumps or soenoid dosing pumps on tanks SER series. Diameter (cm) , ,5 Mode Tank SML 0 SER 0 SML 250 SER 250 SML 300 SER 300 SML 500 SER 500 SML 00 SER 00 Mixers Eectric mixers threephases or singephase, sow (200 rpm) or fast (100 rpm) and fange attachment, for tanks SER series. Shaft (mm) Propeer (mm) Fast (100 rpm) Sow (200 rpm) 50 Suction Devices Motor (kw) 0,12 Materia PVC SS 316 Tank Mode SER 0 SER 250 SER 300 SER 500/00 A suction fiter is provided to protect pump vaves from debris or partices that coud obstruct the pump vave. Suction devices can aso be suppied with integra eve contros. These aow the use of aarms, and protect against the system running dry. n Easy to insta n Standard FPM seas (EPDM upon request) n Made of PCV with cear PVC suction tubing n A suction devices are provided with a foot fiter n A suction devices are provided with a non return vave Uncovered Tanks in Poyethyene Designed to contain our tanks SER series. Mode Height (cm) Diameter (cm) Tank Mode T150 75,5 51 SER 0 T300 87,5 67 SER 250 T SER 300 T SER 500 T SER 00 Dimensions (mm) Length x Ø 50 x x x x x x 3 50 x x x x 3 /6 tube 8/12 tube Tank Mode SER 50 SER 0 SER 250 SER 300 SER 500/00 seko > water & industry > Soenoid dosing metering pumps

11 Accessories Vaves, Sensors and Primingaid n HYC backpressure vaves n HYM Muti vave n HYS Safety vaves n Injection vaves n Fow Sensor n Fixed / Adjustabe backpressure vaves n Primingaid n Mutifunction vave n Pump Head with automatic degassing vave HY Series adjustabes vaves Diaphragm Injection vaves Seas PVC FPM (standard) or EPDM (upon request) Connections 1/2 Gm, /6 and 8/12 tube Fow rate max. 50 /h Pressure max. bar Temperature max. 0 C PVC FPM (standard) or EPDM (upon request) IN 1/2 Gm, /6 and Connections 8/12 tube OUT 1/2 Gm Fow rate max. 50 /h Pressure max. bar Temperature max. 0 C Fow Sensor In order to assess the actua dosing phase, the fow sensor can be used to detect the pump s pusations during the deivery phase: the sensor can aso be used to determine the actua dosing fow rate. This fow sensor is fitted directy on the deivery vave on the dosing pump. PVC Seas FPM Pressure max. bar Temperature max. 0 C Fixed / Adjustabe backpressure vaves The accuracy of the soenoid pumps can be affected by the variation of deivery pressure, especiay between 0 and 1 bar. Using the backpressure vave you can guarantee a constant dosing and avoid siphoning cases when metering in the tank. Moreover, dosing with a backpressure avoids to create siphoning phenomena of the pump. PVC PVDF Diaphragm / FPM EPDM Seas IN /6 tube Connections OUT 3/8 G 1/2 G Fixed 1,5 bar Backpressure Adjustabe 0,5 5 bar Temperature max. 0 C Primingaid Priming probems may occur on dosing pumps with a ow fow rate, and aso in case of excessive suction heights in reation to the pump s capacity. This accessory is abe to resove these probems. Where possibe it is fitted at the same height as the pump s intake vave and a short distance from it. PVC Seas FPM Connections /6 tube 8/12 tube Mode 300 m Temperature max. 0 C Mutifunction vave Mutifunction vave acts as: a backpressure vave, an antisiphoning vave, a overpressure vave, a priming vave, a deivery drain vave (for maintenance). Mutifunction vave is fitted directy on the deivery vave on the dosing pump. PVC PVDF Diaphragm PTFE Connections /6 tube Backpressure 1,5 bar Overpressure 6 bar 12 bar Temperature max. 0 C Pump head with automatic degassing vave It aows to resume the right dosing without any intervention from the user, in case you meter some products generating gases. PVC Seas FPM Bas Ceramic Connections /6 tube Fow rate reduction max. 20% Temperature max. 0 C Bear in mind: to be excusivey used combined with 603 and 800 series pumps. innovation > technoogy > future 11

12 A Wordwide Group at your service seko is an Internationa Group, deveoping, manufacturing and deivering its products in more than 50 countries, through its subsidiaries and an extended network of distributors, agents and authorized deaers. seko is a eading manufacturer of dosing pumps and dosing systems with more than 0 years experience. This ong activity aowed seko to acquire a vast experience in diversified appications and to confirm its internationa success in many industria fieds through the suppy of reiabe soutions for the dosing, injection and transfer of iquids. BRAzIL n Seko do Brasi Commercio de Sistemas de Dosagem Limitada São Pauo (SP) sekobrasi@sekobrasi.com.br BENELUx n Seko Beneux B.V SK Enschede (The Netherands) info@sekobeneux.com CHINA n Seko China Ltd Hebei china@seko.com ITALy n Seko Spa 020 S.Rufina Rieti saes@seko.com ITALy n Seko Spa [Process & Sytems] Peschiera Borromeo Miano info.psd@seko.com info@seko.com RoMANIA n Seko Sieta S.r CujNapoca info.dpro@seko.com SPAIN n Seko Ibérica Sistemas de Dosificación S.A Sant Just Desvern Barceona sekoiberica@sekoiberica.com SWEDEN n Seko Sweden Landskrona info@seko.com TURKEy n Seko Endüstriye Pompaar ve Proses Sistemeri San. ve Tic. Ltd. Şti. Karta Istanbu info@seko.com.tr DENMARK n Seko Denmark DK930 Maribo info@seko.com FRANCE n Seko LefrancBosi S.A Marne La Vaee Cedex 2 efrancbosi@efrancbosi.com service.commercia@seko.fr GERMANy n Seko Deutschand GmbH Mainz Kaste info@sekomesstechnik.de RUSSIA n ooo Seko Moscow sekorussia@seko.com SINGAPoRE n Seko Dosing Systems Asia Pacific Pte Ltd Singapore asiapacific@seko.com SoUTH AFRICA n Seko Southern Africa (PTy) Ltd Kyasand Johannesburg Gauteng saes@sekosa.co.za UNITED ARAB EMIRATES n Seko Midde East FzE P.O. Box 2090 Hamriyah Free Zone, Sharjah info@seko.ae saes@seko.ae UNITED KINGDoM n Seko UK Chemica Contros Ltd Harow, Essex CM19 5JH seko.uk@seko.com USA n Seko Dosing Systems Corporation Tuytown PA saes@sekousa.com For more information Subject to change without notice. > Seko SpA > Printed in Itay > BRo TKN 13AUK