Content. scalur. Areas of application. Product information for pickled hot-rolled steel with very tight thickness tolerances
|
|
- Kenneth Hubbard
- 7 years ago
- Views:
Transcription
1 Steel scalur Product information for pickled hot-rolled steel with very tight thickness tolerances Issue: July 2016, version 0 Areas of application scalur is a pickled hot-rolled steel from thyssenkrupp with very tight thickness tolerances that is suitable for direct processing. Thickness tolerances as low as ±0.05 mm are constant and lower than with comparable conventional hot-rolled steel, with a very flat profile. scalur displays uniform properties and a homogeneous microstructure over the strip length and width, and has very low levels of sulfide inclusions. As a result, the material allows tight manufacturing tolerances, increases yield and provides ease of processing with consistently high product quality. thyssenkrupp offers scalur in various grades of mild steels to EN 10111, general structural steels to EN and thermomechanically rolled steels to EN as well as the complex-phase steel CP-W as a special mill grade. Content 01 Areas of application 02 Available steel grades 02 Thickness tolerances 04 Technical features 06 Available dimensions 15 Sample applications Depending on the strength, these grades are available in thicknesses of to mm and widths of to 1, mm. scalur is particularly suitable for stamped parts, as used for example in belt retractor housings, seat belt buckles, profiles and parts of car seats.
2 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 2 Available steel grades thyssenkrupp supplies scalur i n the following steel grades: To DIN EN Mild steel To DIN EN Structural steel To DIN EN High-strength steel Special mill grade Complex-phase steel Standard designation Standard designation Standard designation Steel grade DD11 S235JR 1) S315MC CP-W DD12 S235J0 1) S355MC DD13 S235J2 1) S420MC DD14 S460MC 1) Delivery condition as rolled (+AR). S500MC SMC SMC SMC SMC Thickness tolerances Comments thyssenkrupp supplies scalur with the following tolerances depending on the thickness ordered: Tolerances depending on thickness ordered Sheet thickness t [mm] Tolerance [mm] t ±0.05 < t 2.50 ± < t ±0.07 < t ±0.08 By arrangement, the grades DD11 to DD14, S315MC to SMC as well as S235JR, S235J0 and S235J2 can be supplied with Class 1 galvanizing properties. scalur is a pickled hot-rolled steel which can be ordered with mill or trimmed edges. The scalur SMC to SMC grades are only available with trimmed edges. The material is available dry or with light, normal or heavy oiling.
3 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 3 thyssenkrupp supplies scalur with the following tolerances depending on the thickness ordered: Thickness tolerances of hot-rolled steel Dimensional tolerances to DIN EN ) and for scalur Tolerance [mm] 1) Tolerances for nominal width w in mm: < w. scalur Mild steels (DD11 14) R e 300 MPa 300 < R e 360 MPa 360 < R e 420 MPa 420 < R e MPa
4 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 4 Technical features Mechanical properties Mild steels Yield strength Tensile strength Elongation Test direction transverse to rolling direction R e [MPa] R m [MPa] A 80 min. [%] A min. [%] t 1) < t < t < 3.0 t 3.0 To DIN EN Standard designation DD DD DD DD Mechanical properties Structural steels Yield strength Tensile strength Elongation Notch impact toughness min. Test direction transverse to rolling direction R eh min. [MPa] R m [MPa] A 80 min. [%] A min. [%] [J] Test temperature [ C] t 1) < t < t < t < 3 t 3.0 To DIN EN Standard designation S235JR S235J S235J ) Thickness t in mm. Yield strength Tensile strength A Percentage elongation after fracture using a proportional specimen with L 0 = 5.65 S 0 for sheet thicknesses 3.0 mm Percentage elongation after fracture using a specimen with gauge length L 0 = 80 mm for sheet thicknesses < 3.0 mm R eh R m A 80
5 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 5 Mechanical properties Thermomechanically rolled steels Yield strength Tensile strength Elongation Test direction in rolling direction R p 0.2 min. [MPa] R m [MPa] A 80 min. [%] A min. [%] To DIN EN Standard designation S315MC S355MC S420MC S460MC S500MC SMC SMC SMC SMC Mechanical properties Complex-phase steel Test direction transverse to rolling direction Yield strength Tensile strength Elongation R p 0,2 [MPa] R m min. [MPa] A 80 min. [%] A min. [%] Special mill grade CP-W Steel grade CP-W R p0.2 Proof strength at 0.2% plastic elongation R m Tensile strength A Percentage elongation after fracture using a proportional specimen with L 0 = 5.65 S 0 for sheet thicknesses 3.0 mm Percentage elongation after fracture using a specimen with gauge length L 0 = 80 mm for sheet thicknesses < 3.0 mm A 80 Chemical composition complex-phase steel Mass fractions in ladle analysis C [%] Si [%] Mn [%] P [%] S [%] Al [%] total Ti + Nb [%] Cr+Mo V B Special mill grade CP-W Steel grade CP-W
6 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 6 Available dimensions scalur DD11, scalur DD12, scalur DD13, scalur DD14 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
7 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 7 scalur S , 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
8 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 8 scalur S315MC 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
9 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 9 scalur S355MC, scalur S420MC 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
10 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 10 scalur S460MC, scalur S500MC 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
11 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 11 scalur SMC 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
12 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 12 scalur SMC, scalur SMC 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
13 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 13 scalur SMC 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
14 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 14 scalur CP-W 1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
15 thyssenkrupp Steel Product information scalur Issue: July 2016, version 0 15 Sample applications Belt retractor housing. Profiles. Stamped parts in cars. Special mill grades are supplied subject to the special conditions of thyssenkrupp. Other delivery conditions not specified here will be based on the applicable specifications. The specifications used will be those valid on the date of issue of this product information brochure. thyssenkrupp Steel Europe AG, Kaiser-Wilhelm-Strasse 100, Duisburg, Germany Postal address: Duisburg, Germany, T: , F: info.steel@thyssenkrupp.com General information All statements as to the properties or utilization of the materials and products mentioned in this brochure are for the purpose of description only. Guarantees in respect of the existence of certain properties or utilization of the material mentioned are only valid if agreed in writing. Subject to technical changes without notice. Reprints, even extracts, only with the permission of thyssenkrupp Steel Europe AG. The latest information can be found on the Internet:
STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
More informationS355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
More informationWear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
More informationQSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149
QSTE... hot-rolled high strength cold forming sheet steel as per QStE hot-rolled high strength cold forming sheet steel Steels labelled QStE are a class of fine grain micro-alloyed thermo-mechanically
More informationHigh-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.
High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings
More informationDIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationALLOY 7475 PLATE AND SHEET HIGHEST TOUGHNESS/STRENGTH
ALCOA MILL PRODUCTS ALLOY 7475 PLATE AND SHEET HIGHEST TOUGHNESS/STRENGTH ALLOY 7475 DESCRIPTION Alloy 7475 is a controlled toughness alloy developed by Alcoa for sheet and plate applications that require
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
More informationJIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
More informationAlternative Steel Materials to BS 5950
BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road
More informationMetric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
More informationWear-resistant steel grades. Hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.com/steel
Wear-resistant steel grades Hot-rolled steel strip and heavy plate Josef Elmer, Key Account Manager voestalpine Steel Division www.voestalpine.com/steel For the highest stress Highest resistance to wear
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationMaterial data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
More informationRules for Classification and Construction Materials and Welding
II Rules for Classification and Construction Materials and Welding 1 Metallic Materials 2 Steel and Iron Materials Edition 2009 The following Rules come into force on April 1 st, 2009 Alterations to the
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
More informationDescription of mechanical properties
ArcelorMittal Europe Flat Products Description of mechanical properties Introduction Mechanical properties are governed by the basic concepts of elasticity, plasticity and toughness. Elasticity is the
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationMATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationINFORMAZIONI GENERALI / GENERAL INFORMATION
INFORMAZIONI GENERALI / GENERAL INFORMATION LE FLANGE DELLA SOCIETà INTERTUBI SONO FORNITE IN ACCORDO ALLE SEGUENTI NORME: INTERTUBI S FLANGES ARE PROVIDED IN ACCORDING WITH THE FOLLOWINGS STANDARDS Norma
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More informationStandard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1
Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued
More informationProducts. EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview
Products EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview High quality, Comprehensive and applicationoriented We Have the Right Solution High Quality and Quickly
More informationHigh-Strength Low-Alloy Steels
High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance to
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationHow To Make A Lightweight Hot Stamping
Innovative Materials and Technologies for Vehicle Construction Oliver Hoffmann, Hannover, 24.4.2012 ThyssenKrupp Group Structure 7 business areas including Steel Europe ThyssenKrupp Steel Europe Elevator
More informationMechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1
381 Mechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1 Abstract Welded Steel Pipe (WSP) is arguably the most widely utilized pipe material for the transmission of water throughout
More informationDomex range of hot-rolled high strength sheet steel
Domex range of hot-rolled high strength sheet steel Domex is the brand name of hot-rolled sheet steel from SSAB Tunnplåt. Domex high strength steels are low-alloy, cold forming steels intended for the
More informationROLLED STAINLESS STEEL PLATES, SECTIONS AND BARS
STANDARD FOR CERTIFICATION No. 2.9 ROLLED STAINLESS STEEL PLATES, SECTIONS AND BARS OCTOBER 2008 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous
More informationGUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationHot rolled products of structural steels
BRITISH STANDARD BS EN 10025-6:2004 +A1:2009 Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and
More informationBUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
More informationTEXNIKH 1501-05-07-02-00:2009 HELLENIC TECHNICAL SPECIFICATION. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS: 93.080.
ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS 9308040 1501-05-07-02-002009 TEXNIKH HELLENIC TECHNICAL SPECIFICATION Road lighting columns and fixtures 10 313 111 45 33064 ежглеяис тгс йубеямгсеыс
More informationNorth American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
More informationMaterial Selection. Chris Dolling. January 2006
Material Selection Chris Dolling Contents 1. Material Properties 2. Specifications & Standards 2.1. General 2.2. Yield Strength 2.3. Ultimate Tensile Strength 2.4. Ductility 2.5. Notch Toughness 2.6. Properties
More informationMaterial data sheet. EOS MaragingSteel MS1. Description
EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using EOS
More informationCorporate Values. History
Company Profile History Corporate Values Leading company in the iron and steel industry since 1945. We have been manufacturing steel for three generations. Çolakoğlu s involvement in the iron and steel
More informationIHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION Generated: Sergiy Papyshev Engineering Approved: Don Prysi Manufacturing Approved: Merzuk Ramic Quality Approved: Steven Barnett Administrative DATE DATE DATE
More informationTolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing
Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter 24 4 6 9 5/8 x 36 Ibs/ft 48 8 6 Slotted
More informationHigh strength steel for steel constructions
NSCC2009 High strength steel for steel constructions R. Willms Marketing Department, AG der Dillinger Hüttenwerke, Dillingen, Germany ABSTRACT: The field of application for high strength steel reaches
More informationSTAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
More informationPart B Repair Quality Standard for Existing Ships
Part B Repair Quality Standard for Existing Ships PART B SHIPBUILDING AND REPAIR QUALITY STANDARD FOR EXISTING SHIPS CONTENTS: 1. Scope 2. General requirements to repairs and repairers 3. Qualification
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationDuPont Kapton. polyimide film. General Specifications
DuPont Kapton polyimide film General Specifications Introduction DuPont manufactures and sells a variety of highquality polyimide film products in conformance with ISO 9002 certification. These specifications
More informationHoesch Matrix System individuell. ThyssenKrupp Steel Europe Thinking the future of steel
Hoesch Matrix System individuell ThyssenKrupp Steel Europe Thinking the future of steel 2 3 Steel in perfect shape and precision Steel the material of contemporary architecture. Throughout the production
More informationAraldite AV 170. Advanced Materials. One component epoxy adhesive. Structural Adhesives. Key properties. Description. Product data.
Advanced Materials Araldite AV 170 Structural Adhesives Araldite AV 170 One component epoxy adhesive Key properties Cures at 140-180 C Heat resistant to 120 C Very good peel strength Good chemical resistance
More informationJIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger
JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for exchanging heat
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationMaterial data sheet. EOS Aluminium AlSi10Mg. Description
EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides information and data
More informationObjective To conduct Charpy V-notch impact test and determine the ductile-brittle transition temperature of steels.
IMPACT TESTING Objective To conduct Charpy V-notch impact test and determine the ductile-brittle transition temperature of steels. Equipment Coolants Standard Charpy V-Notched Test specimens Impact tester
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationCommercial vehicle industry. Your partner for innovative solutions. voestalpine Steel Division www.voestalpine.com/steel
Commercial vehicle industry Your partner for innovative solutions Carina Baumgartner, Customer service voestalpine Steel Division www.voestalpine.com/steel Through years of experience and future-oriented
More informationStandard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
More informationDIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
More informationAppendix H. 2007 Interscience Communications. Reprinted with permission.
Appendix H Outinen J., Mechanical properties of structural steels at elevated temperatures and after cooling down, Fire and Materials Conference, San Francisco, USA, Proceedings, Interscience Communications
More informationPAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationINFLUENCE OF THERMOMECHANICAL TREATMENT ON THE STEEL C45 FATIGUE PROPERTIES
CO-MAT-TECH 2005 TRNAVA, 20-21 October 2005 INFLUENCE OF THERMOMECHANICAL TREATMENT ON THE STEEL C45 FATIGUE PROPERTIES Jiří MALINA 1+2, Hana STANKOVÁ 1+2, Jaroslav DRNEK 3, Zbyšek NOVÝ 3, Bohuslav MAŠEK
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
More informationConstruction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION
Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two
More informationHIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
More informationRECENT DEVELOPMENTS IN THE USE OF QUENCHED AND SELF-TEMPERED HOT ROLLED H-BEAMS. Subodh SHINDE, Marc MAY
RECENT DEVELOPMENTS IN THE USE OF QUENCHED AND SELF-TEMPERED HOT ROLLED H-BEAMS Subodh SHINDE, Marc MAY ArcelorMittal, Ostrava, Czech Republic, EU, subodh.shinde@arcelormittal.com, marc.may@arcelormittal.com
More informationCHROMIUM STEEL POWDERS FOR COMPONENTS. JEANETTE LEWENHAGEN Höganäs AB, Sweden
CHROMIUM STEEL POWDERS FOR COMPONENTS JEANETTE LEWENHAGEN Höganäs AB, Sweden KEYWORDS Pre-alloyed steel powder, chromium, PM ABSTRACT Chromium as an alloying element is of great interest due to its low
More informationShape the future of energy with innovative electrical steel for the energy industry. voestalpine Steel Division www.voestalpine.
ISOVAC your FUTURE! Shape the future of energy with innovative electrical steel for the energy industry. Tereza Schöberl, Key Account Manager voestalpine Steel Division www.voestalpine.com/stahl ISOVAC
More informationHot rolled tubes for mechanical engineering. We ll be sending you copies from existing stocks until the revised version is available.
Hot Rolled Tubes for Mechanical Engineering GENERAL PRODUCT OVERVIEW Hot rolled tubes for mechanical engineering General product overview We ll be sending you copies from existing stocks until the revised
More informationwww.ruukki.com WELDING. GENERAL HOT-ROLLED STEEL SHEETS, PLATES AND COILS
www.ruukki.com WELDING. GENERAL HOT-ROLLED STEEL SHEETS, PLATES AND COILS Selecting the welding process The choice of the welding process must include the consideration of any steel-specific limitations
More informationDevelopment, production and application of heavy plates in grades up to X120
Development, production and application of heavy plates in grades up to X120 F. Grimpe Mannesmannröhren Mülheim GmbH, Mülheim/Ruhr, Germany S. Meimeth Mannesmannröhren Mülheim GmbH, Mülheim/Ruhr, Germany
More informationSheet metal operations - Bending and related processes
Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending
More informationLecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
More informationThickness reduction Efficient, innovative, sustainable. Rasselstein Your Quality Partner
Thickness reduction Rasselstein Your Quality Partner Thickness reduction Our many years of experience in different markets form a strong basis for achieving further reductions of thickness in all application
More information% Si Fe Cu Mn Mg Cr Zn Ti Others Others. Europe USA Spain France Germany G.B. Italy Sweden Switzerland Japan. ALMgSi1 3.3215 H30
ALUMINIUMS Alloys Aluminium - Magnesium - Silicon 6082 % Si Fe Cu Mn Mg Cr Zn Ti Others Others Minimum 0,70 0,40 0,60 Each Total Maximum 1,30 0,50 0,10 1,00 1,20 0,25 0,20 0,10 0,05 0,10 Europe USA Spain
More informationSpecification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
More informationHigh Efficient Casting Machine for Biaxially Oriented Film Manufacturing Plant
107 High Efficient Casting Machine for Biaxially Oriented Film Manufacturing Plant Hideo Kometani Hidetoshi Kitajima Hiroshi Tsuji Takuya Goto Masahiro Yoshizawa (MHI) has made incessant efforts to improve
More informationTensile Testing of Steel
C 265 Lab No. 2: Tensile Testing of Steel See web for typical report format including: TITL PAG, ABSTRACT, TABL OF CONTNTS, LIST OF TABL, LIST OF FIGURS 1.0 - INTRODUCTION See General Lab Report Format
More informationDX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
More informationCold drawn seamless steel tubes for mechanical applications
Cold drawn seamless steel tubes for mechanical applications Cold drawn precision seamless tubes for mechanical and general engineering applications. Available in various steel grades, according to the
More informationRules for Classification and Construction Materials and Welding
II Rules for Classification and Construction Materials and Welding 1 Metallic Materials 1 Principles and Test Procedures Edition 2009 The following Rules come into force on April 1 st, 2009 Alterations
More informationWelded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction
Welded Fabric 1.0 Introduction Welded fabric, often referred to as mesh, is a machine welded grid arrangement of reinforcing bars or wires. It is covered by British Standard BS4483. This was revised in
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationRev. 00 S-7016.H. COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.
Rev. 00 COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD. Specification AWS JIS EN ISO Z3211 A5.1 2560-A E7016 E4916 E42 E4916 E42 3 B 1 2 Applications Structures
More informationUniversity of Portland School of Engineering LABORATORY OUTLINE: TENSILE TESTING OF STEEL & ALUMINUM ALLOYS (ASTM E8)
TENSILE TESTING OF STEEL & ALUMINUM ALLOYS (ASTM E8) To carry out a standard tensile test on specimens of a hot rolled steel (AISI 1045), Type 2024- T351 aluminum, polymers (UHMW-PE, acrylic) and, from
More informationChapter 2 Basis of design and materials
Chapter 2 Basis of design and materials 2.1 Structural action It is necessary to start a design by deciding on the type and layout of structure to be used. Tentative sizes must be allocated to each structural
More informationChapter 2 Fractal Analysis in CNC End Milling
Chapter 2 Fractal Analysis in CNC End Milling Abstract This chapter deals with the fractal dimension modeling in CNC end milling operation. Milling operations are carried out for three different materials
More informationTemperature C 10 15 23 40. Cure time to reach hours - - - - LSS > 1MPa minutes 20 12 8 2
Advanced Materials Araldite 2021 Structural Adhesives TECHNICAL DATA SHEET Araldite 2021 Two component toughened methacrylate adhesive system Key properties Rapid curing High peel strength Multi purpose
More informationLOW CARBON MICROALLOYED COLD ROLLED, HOT DIP GALVANIZED DUAL PHASE STEEL FOR LARGER CROSS-SECTIONAL AREAS WITH IMPROVED PROPERTIES
LOW CARBON MICROALLOYED COLD ROLLED, HOT DIP GALVANIZED DUAL PHASE STEEL FOR LARGER CROSS-SECTIONAL AREAS WITH IMPROVED PROPERTIES Hardy Mohrbacher NiobelCon bvba, Schilde, Belgium Thomas Schulz Salzgitter-Mannesmann
More informationSika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades
Construction Sika For Sealing and Waterproofing Construction Gaps in Building Façades Waterproof and Airtight Flexible Seal Controlled Vapour Diffusion Bonds to any Building Substrate Prevents Interstitial
More informationContents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125
ELATECH Polyurethane belts 2 Introduction to ELATECH polyurethane belts 2 Page Contents ELATECH M and V 3 Introduction 4 Tension cords 4 Products certifications 4 Mechanical and chemical properties 4 Executions
More informationDanSteel A/S European structural steel standard EN 10025:2004
European structural steel standard EN 10025:2004 DanSteel A/S, Havnevej 33 Phone: +(45) 47 77 03 33 CVR-nr.: 10 09 29 22 DK-3300 Frederiksværk Fax: +(45) 47 72 40 03 www.dansteel.dk EN 10025:2004 The new
More informationBETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
More informationSpecifications, Product Testing and Terminology
Specifications, Product Testing and Terminology The following synopsis provides a review of various material and final product testing, which is performed on our products, as well as, many of our competitors.
More information