TEXNIKH :2009 HELLENIC TECHNICAL SPECIFICATION. ежглеяис тгс йубеямгсеыс (теувос еутеяо) ICS:

Size: px
Start display at page:

Download "TEXNIKH 1501-05-07-02-00:2009 HELLENIC TECHNICAL SPECIFICATION. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS: 93.080."

Transcription

1 ежглеяис тгс йубеямгсеыс (теувос еутеяо) ICS TEXNIKH HELLENIC TECHNICAL SPECIFICATION Road lighting columns and fixtures

2 33064 ежглеяис тгс йубеямгсеыс (теувос еутеяо) T H T () () 2 (2 ) () T E 99 ()

3 ежглеяис тгс йубеямгсеыс (теувос еутеяо)

4 33066 ежглеяис тгс йубеямгсеыс (теувос еутеяо) ( - ) 4

5 ежглеяис тгс йубеямгсеыс (теувос еутеяо) ( ) EC EN 40-1 EN 40-2 EN Infrastructure for road lighting -- Lighting columns - Part 1 Definitions and terms Lighting Columns - Part 2 General requirements and dimensions Lighting columns - Part 3-1 Design and verification - Specification for characteristic loads EN Lighting columns - Part 3-2 Design and verification - Verification by testing EN EN 40-5 Lighting columns - Part 3-3 Design and verification - Verification by calculation Lighting columns - Part 5 Requirements for steel lighting columns

6 33068 ежглеяис тгс йубеямгсеыс (теувос еутеяо) EN 40-6 Lighting columns - Part 6 Requirements for aluminium lighting columns EN 40-7 EN 40-9 EN Lighting columns - Part 7 Requirements for fibre reinforced polymer composite lighting columns Lighting columns - Part 9 Special requirements for reinforced and prestressed concrete lighting columns E Hot rolled products of structural steels - Part 1 General technical delivery conditions 1 EN Hot-rolled flat products made of high yield strength steels for cold forming - Part 1 General delivery conditions EN Hot-rolled flat products made of high yield strength steels for cold forming - Part 2 Delivery conditions for thermomechanically rolled steels EN ISO Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure -- - EN ISO Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1 Arc welding EN ISO Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test -- - EN Qualification test of welders - Fusion welding - Part 1 Steels - 1 EN ISO 1461 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods -- ' EN EN ISO/IEC 9000 Luminaires Part 2-3 Particular requirements - Luminaires for road and street lighting Quality management systems Fundamentals and vocabulary

7 ежглеяис тгс йубеямгсеыс (теувос еутеяо) Fixed capacitors for use in electronic equipment Part 1 Generic specification -- 1 EN ISO EN EN Aluminium and aluminium alloys - Sheet strip and plate - Part 2 Mechanical properties Wrought aluminium and aluminium alloys -- Chemical composition and forms of products -- Part 1 Chemical composition -- 1 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW Part 2 Tolerances on dimensions and form -- - EN AW-6060 EN AW EN Live working Hand tools for use up to 1000 V/AC and 1500 V/DC V 1500 V EN 388 EN 397 Protective gloves against mechanical risks -- EN 397 Industrial safety helmets -- Industrial safety helmets EN ISO Personal protective equipment Safety footwear 165 Measurements of self-health protection - vocabulary ( ) 7

8 33070 ежглеяис тгс йубеямгсеыс (теувос еутеяо) () EN ISO ISO ISO ISO ISO ISO 9000 CE ( ) ( ) 1/0/481/2786 ( 573 /991986) 1/0/123/8388 ( 177 /31388) 13/0/5781/ ( 967 / /281294)

9 ежглеяис тгс йубеямгсеыс (теувос еутеяо) COMMISSION INTERNATIONALE DE L ECLAIRAGE (CIE) ///16522/ / ///4318/ ( 20 m) ( 20 m) () m C ( ) 40-3 EN ISO EN EN h [m] H < h< < h t [mm] t 396 t 478 t EN EN ( ) 9

10 33072 ежглеяис тгс йубеямгсеыс (теувос еутеяо) AWS D12/D12M 4223 EN [MPa] t [mm] t 34 t 3 2 mm cm 248 MPa EN ISO/IEC 9000 EN 40-1 H EN 287 EN ISO [m] [mm] mm 10

11 ежглеяис тгс йубеямгсеыс (теувос еутеяо) AWS D11/D11M 70 m EN ISO 1461 (95%) 300 mm 85 mm mm 200 mm / ( ) 1 [m] [mm] [mm] x M x M x M m x 4 mm 11

12 33074 ежглеяис тгс йубеямгсеыс (теувос еутеяо) mm 85 mm mm ( 8 mm ) 200 mm kg/m S /mm ( - ) [m] [mm] % 1% 3 1 % 5% 10 mm m 125 m 2 m 3 m 2%

13 ежглеяис тгс йубеямгсеыс (теувос еутеяо) [m] * [m] [m] * SO //481/ ( 573/090986) ( ) 50 mm mm 75 mm 200 mm 50 mm ( ) 24 m 13

14 33076 ежглеяис тгс йубеямгсеыс (теувос еутеяо) ( ) ( 26 kg 025 m 2 ) //481/ ( 573/090986) ( ) 7678 mm 600 mm (200 mm 400 mm ) 50 mm mm 75 mm 200 mm 50 mm ( ) 24 m ( ) ( 26 kg 025 m 2 ) (20 m) ( Fe 510B EN ) 30 m 4 37 m 5 37 m 6

15 ежглеяис тгс йубеямгсеыс (теувос еутеяо) cm ( ) 20% 85% 150 mm ( ) Fe 360 () EN ISO 1461 ( ) AISI m 15

16 33078 ежглеяис тгс йубеямгсеыс (теувос еутеяо) ( x = 30 x 70 cm) 40 x 70 cm ( ) 3 mm EC3 EN ISO

17 ежглеяис тгс йубеямгсеыс (теувос еутеяо) IP65 IP W 250 W 400 W (HPS) ( ) Na IP65-10C +40C (HPS) W Lumen 230 V/50 Hz mm SECURIT 40 IP 65 17

18 33080 ежглеяис тгс йубеямгсеыс (теувос еутеяо) (Balast) 230 V 50 Hz 10% () 085 (Starter) //481/ ( 573/090986) ( ) E1VV-R 4 x 10 mm 2 E1VV 4 x 25 mm 2 ( )

19 ежглеяис тгс йубеямгсеыс (теувос еутеяо) () ( ) ASTM A m 19

20 33082 ежглеяис тгс йубеямгсеыс (теувос еутеяо) () / 6 42 ( 54)

21 ежглеяис тгс йубеямгсеыс (теувос еутеяо) ( ) ( ) ( ) EN /57/ ( 305/96) ( 17/96 159/99) / () EN 388 EN 397 EN ISO / ( ) ( ) ( ) 21

22 33084 ежглеяис тгс йубеямгсеыс (теувос еутеяо) ( ) ( ) 20 m ( ) 22

23 ежглеяис тгс йубеямгсеыс (теувос еутеяо) EC3 3 CIE COMMISSION INTERNATIONALE DE L ECLAIRAGE - 1/0/481/2786 ( 573 /991986) - 1/0/123/8388 ( 177 /31388) - 13/0/5781/ ( 967 / /281294) - 13///16522/ / ///4318/ & 17/ /57/ Minimum requirements for health and safety of permanents and mobile work sites -- AWS D12/D12M Structural Welding Code - Aluminum (includes ANSI/AWS D12A-83 Commentary) -- A ( American Welding Society) AWS D11/D11M Structural Welding Code - Steel -- ( American Welding Society) 23

2009-12-23 ICS: 93.160. Strengthening retrofitting of reinforced concrete structures by gluing of fibre reinforced polymeric fabrics (FRP fabrics)

2009-12-23 ICS: 93.160. Strengthening retrofitting of reinforced concrete structures by gluing of fibre reinforced polymeric fabrics (FRP fabrics) 36888 ежглеяис тгс йубеямгсеыс (теувос еутеяо) 20091223 ICS: 93160 150114010801:2009 H HELLENIC CHNICAL SPECIFICATION (FRP ) Strengthening retrofitting of reinforced concrete structures by gluing of fibre

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

1501-04-04-03-02:2009 HELLENIC CHNICAL SPECIFICATION. Sanitary ware for disabled persons. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 32199

1501-04-04-03-02:2009 HELLENIC CHNICAL SPECIFICATION. Sanitary ware for disabled persons. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 32199 ежглеяис тгс йубеямгсеыс (теувос еутеяо) 32199 2009-12-23 ICS 93160 1501-04-04-03-022009 H HELLENIC CHNICAL SPECIFICATION Sanitary ware for disabled persons 7 313 111 45 32200 ежглеяис тгс йубеямгсеыс

More information

STANDARDS FOR THE MATERIALS

STANDARDS FOR THE MATERIALS STANDARDILUETTELO 1(15) Kpl Standardin numero STANDARDS FOR THE MATERIALS 1 EN 10204 2004-10 Metallic products.types of inspection documents 2 EN 10079 1992-10 Definition of steel products 3 EN 10027-1

More information

American Society of Mechanical Engineers

American Society of Mechanical Engineers American Society of Mechanical Engineers ASTM A53 /ASME SA53 Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A105/ASME SA105 Forgings, Carbon Steel, for Piping Components ASTM A106/ASME

More information

Alternative Steel Materials to BS 5950

Alternative Steel Materials to BS 5950 BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road

More information

Pipe Pile. (800) 848-6249

Pipe Pile. (800) 848-6249 Pipe Pile Similar to H-Piles, Pipe Piles are also designed to transfer structural loads through the foundation to soils below. Where H-Piles are typically classified as point bearing, Pipe Piles are most

More information

1501-04-04-03-01:2009 HELLENIC CHNICAL SPECIFICATION. 32176 ежглеяис тгс йубеямгсеыс (теувос еутеяо) Sanitary ware, common 2009-12-23 ICS: 93.

1501-04-04-03-01:2009 HELLENIC CHNICAL SPECIFICATION. 32176 ежглеяис тгс йубеямгсеыс (теувос еутеяо) Sanitary ware, common 2009-12-23 ICS: 93. 32176 ежглеяис тгс йубеямгсеыс (теувос еутеяо) 2009-12-23 ICS 93160 1501-04-04-03-012009 H HELLENIC CHNICAL SPECIFICATION Sanitary ware common 10 313 111 45 ежглеяис тгс йубеямгсеыс (теувос еутеяо) 32177

More information

High-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.

High-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine. High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings

More information

British standards (BS) & codes related to steel construction

British standards (BS) & codes related to steel construction Maryland Metrics Technical Data Chart British standards (BS) & codes related to steel construction Structural steel BS 970 : specification for wrought steels for mechanical and allied engineering purposes

More information

Preformed Metal Roofing and Siding

Preformed Metal Roofing and Siding Page -1-1. GENERAL 1.1. Description This specification along with the drawings covers the furnishing of all material, products, equipment, accessories, tools, services, transportation, labor and supervision

More information

DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES

DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization

More information

QUALIFICATION OF PROCEDURE AND WELDER. (19 February 2014)

QUALIFICATION OF PROCEDURE AND WELDER. (19 February 2014) QUALIFICATION OF PROCEDURE AND WELDER (19 February 2014) QUALIFICATION OF PROCEDURE AND WELDER The most important tasks prior production welding Welding qualifications are statements by which the welding

More information

QSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149

QSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149 QSTE... hot-rolled high strength cold forming sheet steel as per QStE hot-rolled high strength cold forming sheet steel Steels labelled QStE are a class of fine grain micro-alloyed thermo-mechanically

More information

Urban lighting luminaire ECOLO. Registered models - Design Massimo Sacconi. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato)

Urban lighting luminaire ECOLO. Registered models - Design Massimo Sacconi. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) Urban lighting luminaire ECOLO Registered models - Design Massimo Sacconi NERO e GRIGIO per marchi piccoli Ecolo is a versatile and multifunctional solution designed to enhance the most different urban

More information

GUARDRAIL POST STEEL

GUARDRAIL POST STEEL GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating

More information

Structural Welding Requirements and the Building Official. May 2015

Structural Welding Requirements and the Building Official. May 2015 Structural Welding Requirements and the Building Official May 2015 Agenda What Makes a Good Weld? What is the CWB? Structural Steel Requirements CWB Certification Pre Engineered Building Requirements A660

More information

DuroSite TM High Bay Lighting

DuroSite TM High Bay Lighting DuroSite TM High Bay Lighting LED White Lighting Brochure for Industrial Applications CE version Application: The first of its kind, the Dialight DuroSite TM LED High Bay luminaire was designed specifically

More information

THE CAPABILITIES OF ZINC DIE CASTING

THE CAPABILITIES OF ZINC DIE CASTING THE CAPABILITIES OF ZINC DIE CASTING Presented by: Ryan Winter (Manager Customer Engineering Services) Eastern Alloys, Inc. Eastern Alloys, Inc. Introduction to ZINC Introduction to Zinc Zinc is the 4th

More information

Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013

Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013 Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013 Agenda Dubuc works: location and overview MMC fabrication process at Rio Tinto Alcan Boralcan product caracteristics

More information

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued

More information

Wire Fabric and Reinforcement

Wire Fabric and Reinforcement Wire Fabric and Reinforcement Under the state specification for 709.08 for concrete reinforcement, ASTM A 82 is called out. Under the state specification 709.10 for concrete reinforcement, ASTM A 185 is

More information

JIS A5525 Steel pipes piles

JIS A5525 Steel pipes piles JIS A5525 Steel pipes piles 1. Scope This Japanese Industrial Standard specifies the welded steel pipe piles (hereafter referred to as "piles"), used in the foundation of structures such as civil engineering

More information

INDIAN STANDARDS (BIS) ON WELDING

INDIAN STANDARDS (BIS) ON WELDING ** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding

More information

Hot-rolled Flat Products

Hot-rolled Flat Products ArcelorMittal Ostrava Hot-rolled Flat Products Production programme Contents 4 Technology Description and Used Terminology 6 Steel Grades, Chemical Composition 10 Semi-Finished Products (Continuously

More information

6E-141 Upper T-Shaped Arm Auxiliary Bracket (Rank C)

6E-141 Upper T-Shaped Arm Auxiliary Bracket (Rank C) DISCLAIMER: This translation may be used for reference purpose only. This English version is not an official translation of the original Japanese document. In cases where any differences occur between

More information

CHAIN-LINK FENCES BID SPECIFICATIONS DESCRIPTION

CHAIN-LINK FENCES BID SPECIFICATIONS DESCRIPTION CHAIN-LINK FENCES BID SPECIFICATIONS DESCRIPTION 1 This item shall consist of furnishing and erecting Chain-Link fence in accordance with these specifications and the details shown on the plans and in

More information

AIRPORT SECURITY FENCING. A. American Society for Testing and Materials (ASTM):

AIRPORT SECURITY FENCING. A. American Society for Testing and Materials (ASTM): SECTION 02832 AIRPORT SECURITY FENCING PART 1-GENERAL 1.1 SUMMARY A. Section includes: Construct airport security chain-link fence and gate at specified areas and conforming lines, grades, details indicated

More information

Hot rolled products of structural steels

Hot rolled products of structural steels BRITISH STANDARD BS EN 10025-4:2004 Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels The European Standard

More information

SECTION 03400 PRECAST CONCRETE STRUCTURES

SECTION 03400 PRECAST CONCRETE STRUCTURES SECTION 03400 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for precast concrete structures, including fabrication and erection. 1.02 REFERENCE STANDARDS A. American Society for

More information

Master Panel 1000 R5 Roof

Master Panel 1000 R5 Roof Master Panel 1000 R5 Roof Product Description The important feature of the roof elements are the easy installation procedure. The element fix exactly and pushed together without much force. Roof coverage

More information

Steel construction industry. Your partner for innovative solutions. voestalpine Steel Division

Steel construction industry. Your partner for innovative solutions. voestalpine Steel Division Steel construction industry Your partner for innovative solutions Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel With our material and processing expertise, we supply

More information

Rev. 00 S-7016.H. COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

Rev. 00 S-7016.H. COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD. Rev. 00 COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD. Specification AWS JIS EN ISO Z3211 A5.1 2560-A E7016 E4916 E42 E4916 E42 3 B 1 2 Applications Structures

More information

CONTRACT SPECIFICATIONS - SEISMIC ISOLATION BEARINGS

CONTRACT SPECIFICATIONS - SEISMIC ISOLATION BEARINGS CONTRACT SPECIFICATIONS - SEISMIC ISOLATION BEARINGS 1.0 DESIGN 1.1 Scope of Work 1.1.1 This work shall consist of furnishing Isolation Bearings and installing Isolation Bearing Assemblies at the locations

More information

PHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCL ECO, 18 80 W Compact and T5c fluorescent lamps

PHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCL ECO, 18 80 W Compact and T5c fluorescent lamps Product description Noise-free precise control via DSI signal or switchdim CELMA energy class A1 1) Interfaces DSI switchdim Integrated SMART-Interface Functions Optimum filament heating in any dimmer

More information

Urban lighting luminaire XMOD RX. Registered models - Design Massimo Sacconi. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato)

Urban lighting luminaire XMOD RX. Registered models - Design Massimo Sacconi. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) Urban lighting luminaire XMOD RX Registered models - Design Massimo Sacconi NERO e GRIGIO per marchi piccoli M OD RX XMOD is part of the XMOD series : a series of LED luminaires for street, urban and architectural

More information

Part B Repair Quality Standard for Existing Ships

Part B Repair Quality Standard for Existing Ships Part B Repair Quality Standard for Existing Ships PART B SHIPBUILDING AND REPAIR QUALITY STANDARD FOR EXISTING SHIPS CONTENTS: 1. Scope 2. General requirements to repairs and repairers 3. Qualification

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

ANSI/AWS D10.4-86R An American National Standard. Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing

ANSI/AWS D10.4-86R An American National Standard. Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing ANSI/AWS D10.4-86R An American National Standard Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing Key Words austenitic pipe, chromium-nickel pipe, gas metal

More information

Hot rolled products of structural steels

Hot rolled products of structural steels BRITISH STANDARD BS EN 10025-6:2004 +A1:2009 Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and

More information

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049 Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation

More information

Electronic ballasts for fluorescent lamps Products for special applications. PC BASIC, 4 28 W Electronic ballast for system output < 25 W

Electronic ballasts for fluorescent lamps Products for special applications. PC BASIC, 4 28 W Electronic ballast for system output < 25 W T5 TC-DEL TC-SEL TC-TEL TC-DD PC BASIC, 4 28 W Electronic ballast for system output < 25 W Product description CELMA Energy Efficiency Index A2 / A3 Nominal life time up to 50,000 h (at ta 50 C with a

More information

EGMP Forging stock standards guideline

EGMP Forging stock standards guideline Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure

More information

PHASED OUT. Digital dimmable ballasts for fluorescent lamps EXCEL one4all series. PCA TCL EXCEL one4all, 18 80 W Compact and T5c fluorescent lamps

PHASED OUT. Digital dimmable ballasts for fluorescent lamps EXCEL one4all series. PCA TCL EXCEL one4all, 18 80 W Compact and T5c fluorescent lamps EXCEL oneall series Product description Noise-free precise control via DSI signal, switchdim, corridorfunction or DALI DALI-MEMORY Extended DALI commands CELMA energy class A1 1) Interfaces DALI DSI switchdim

More information

UNIVERSAL RAILING, STEEL

UNIVERSAL RAILING, STEEL RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL

More information

Steel Deck. A division of Canam Group

Steel Deck. A division of Canam Group Steel Deck A division of Canam Group TABLE OF CONTENTS PAGE OUR SERVICES... 4 NOTES ABOUT LOAD TABLES... 5 P-3615 & P-3606 DIMENSIONS & PHYSICAL PROPERTIES... 6 FACTORED AND SERVICE LOADS... 7 P-2436 &

More information

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat

More information

Standard Specification for Stainless Steel Bars and Shapes 1

Standard Specification for Stainless Steel Bars and Shapes 1 Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates

More information

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore

More information

FRACASSO SCAFFOLDING PS 720

FRACASSO SCAFFOLDING PS 720 FRACASSO SCAFFOLDING PS 720 Characteristics Geometry Strengths PS 720 was designed and constructed in keeping with European regulations EN12810 and EN12811. 150 mm pin obtained by tapering the upright

More information

Discussion on Products under the Scope of EN 1090-1 and proposed CEN/TR to clarify the scope

Discussion on Products under the Scope of EN 1090-1 and proposed CEN/TR to clarify the scope CEN/TC 135 N 686 European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung CEN/TC 135 Execution of steel structures and aluminium structures N 686 Secretariat:

More information

[see Figure 3 below] Ferrite tile walls and ceiling RF Absorber parcel walls and ceiling Removable floor section to make fully anechoic

[see Figure 3 below] Ferrite tile walls and ceiling RF Absorber parcel walls and ceiling Removable floor section to make fully anechoic Test Room ID: R21F Description: SEMI ANECHOIC SHIELDED TEST ENCLOSURE Primary Testing Uses: FCC, CE Mark Dimensions: 9.75m x 6.10m x 5.49m (32ft. x 20ft. x 18ft.) [see Figure 3 below] Construction: Galvanized

More information

CE marking of steel elements according to EN 1090-1

CE marking of steel elements according to EN 1090-1 CE marking of steel elements according to EN 1090-1 CE marking of steel elements according to EN 1090-1 Summary 1 EN 1090, CPR, CPR vs. CPD, CE marking 1.1 EN 1090 1.2 CPR 1.3 CPR vs. CPD 1.4 CE marking

More information

Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...

Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy

More information

FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in December

FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in December News Release FOR IMMEDIATE RELEASE January 27, 2015 CONTACT Lisa Harrison 202.452.7115/ lharrison@steel.org FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in

More information

LED High Bay Light 100W

LED High Bay Light 100W LED High Bay Light 100W CRI: Life Hours: LED Count: Net Weight: 100W 7,527lm (5,500K-6,000K) 70 20.25in(D) Reflector 140 Up to 50,000 hrs 1 High Power 10x10 LED Array Hanging Loop -40-113 -277VAC 1.00

More information

STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4

STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed

More information

Precision Leaded Resistors

Precision Leaded Resistors FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to

More information

YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS

YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS CASTINGS WELDING FORGINGS CNC PLATE MACHINING CASTINGS WELDING There are many obvious benefits for you by choosing to use castings.

More information

Scope of EN 1090-1 Clarification Document

Scope of EN 1090-1 Clarification Document Scope of EN 1090-1 Clarification Document This document has been submitted to the European Commission as the UK view on the scope of EN 1090-1. After discussions, including with the European Technical

More information

External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual

External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual conferdo GmbH & Co. KG External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual of the company conferdo GmbH & Co. KG STAHLBAU OHNE GRENZEN STEELWORK

More information

--`,,,,``,,,,,,````,,``,,,`,,`-`-`,,`,,`,`,,`--- Copyright American Welding Society

--`,,,,``,,,,,,````,,``,,,`,,`-`-`,,`,,`,`,,`--- Copyright American Welding Society 2004 by American Welding Society. All rights reserved Printed in the United States of America NOTE: Although care was taken in choosing and presenting the data in this guide, AWS cannot guarantee that

More information

The Kodiak 2400 Seating System by Royal Stewart Ltd.:

The Kodiak 2400 Seating System by Royal Stewart Ltd.: The Kodiak 2400 Seating System by Royal Stewart Ltd.: PART 1 GENERAL 1.1 Description Telescopic Bleacher Seating includes either manually or electrically operated systems of multiple tiered seating rows

More information

PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January

PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January News Release FOR IMMEDIATE RELEASE February 25, 2015 CONTACT: Lisa Harrison 202.452.7115/ lharrison@steel.org PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January Washington,

More information

Cable Trays Technical Instructions & Specifications

Cable Trays Technical Instructions & Specifications Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased

More information

JIS G3444 Carbon steel tubes for general structural purposes

JIS G3444 Carbon steel tubes for general structural purposes JIS G3444 Carbon steel tubes for general structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes (hereafter referred to as "tubes") used for civil engineering, architecture,

More information

Reproduced with the permission of the American Welding Society (AWS), Miami, Florida - 09/15/2011. 7. Stud Welding

Reproduced with the permission of the American Welding Society (AWS), Miami, Florida - 09/15/2011. 7. Stud Welding 7. Stud Welding 7.1 Scope Section 7 contains general requirements for welding steel studs to steel (see 7.2.7 and 1.2.2 for approved steels). In addition, it stipulates specific requirements for the following:

More information

Wires and Strands for Prestressed Concrete

Wires and Strands for Prestressed Concrete Wires and Strands for Prestressed Concrete Raw Materials Manufacturing Process Wires 1 Wires and Strands for Prestressed Concrete 1.1 Wires EMCOCABLES manufactures a wide variety of wires with a high

More information

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :- Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and

More information

Certified Welder for Welding Code AWS D1.1-2010

Certified Welder for Welding Code AWS D1.1-2010 Certified Welder for Welding Code AWS D1.1-2010 This document includes: Certified Welder for Welding Code AWS D1.1-2010 Protocol Welder Qualification Paperwork AWS D1.1 Welder Qualification Test Procedure

More information

HOME RESEARCH & DEVELOPMENT SECTORS WHY PROFILES STEEL STRIP & PLATES LOGISTICAL SERVICES. Presentation. Europe. Quality.

HOME RESEARCH & DEVELOPMENT SECTORS WHY PROFILES STEEL STRIP & PLATES LOGISTICAL SERVICES. Presentation. Europe. Quality. HOME SECTORS Presentation Europe PROFILES WHY Quality United States STEEL STRIP & PLATES SERVICES Finishing Ethiopia CUSTOM-MADE PROFILES INNOVATIVE EXPERTISE Always the best one-stop-shopping solution

More information

Introduction. Eurocodes. Specification. Cost

Introduction. Eurocodes. Specification. Cost Introduction Eurocodes Specification Cost Structural Eurocodes BS EN 1990 (EC0): BS EN 1991 (EC1): Basis of structural design Actions on Structures BS EN 1992 (EC2): BS EN 1993 (EC3): BS EN 1994 (EC4):

More information

AWS A5.22/A5.22M:2010 An American National Standard. Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

AWS A5.22/A5.22M:2010 An American National Standard. Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods An American National Standard Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods An American National Standard Approved by the American National Standards Institute

More information

Innovative Materials and Technologies for Vehicle Construction

Innovative Materials and Technologies for Vehicle Construction Innovative Materials and Technologies for Vehicle Construction Oliver Hoffmann, Hannover, 24.4.2012 ThyssenKrupp Group Structure 7 business areas including Steel Europe ThyssenKrupp Steel Europe Elevator

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

Standard Pipe A53 CW and ERW

Standard Pipe A53 CW and ERW Standard Pipe A53 CW and ERW Standard Pipe A53 CW and ERW Wheatland Tube is known as a leader in the standard pipe industry. We ve been producing tube and pipe for more than 75 years and our reputation

More information

Environmental Product Declaration EPD

Environmental Product Declaration EPD Environmental Product Declaration EPD May 2014 EPD The company Europrofil AB, founded 1982, is the leading producer of light gauge steel profiles for the building construction industry. Headquarters and

More information

SECTION 02824 EXPANDED METAL MESH FENCE

SECTION 02824 EXPANDED METAL MESH FENCE SECTION 02824 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for expanded metal mesh fence on the right-of-way. 1.02 REFERENCE STANDARDS A. ASTM International (ASTM): 1.03 SUBMITTALS

More information

MODEL HSR-007 Direct Drive Rolling Steel

MODEL HSR-007 Direct Drive Rolling Steel MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007

More information

RECENT DEVELOPMENTS IN THE USE OF QUENCHED AND SELF-TEMPERED HOT ROLLED H-BEAMS. Subodh SHINDE, Marc MAY

RECENT DEVELOPMENTS IN THE USE OF QUENCHED AND SELF-TEMPERED HOT ROLLED H-BEAMS. Subodh SHINDE, Marc MAY RECENT DEVELOPMENTS IN THE USE OF QUENCHED AND SELF-TEMPERED HOT ROLLED H-BEAMS Subodh SHINDE, Marc MAY ArcelorMittal, Ostrava, Czech Republic, EU, subodh.shinde@arcelormittal.com, marc.may@arcelormittal.com

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

Standards, Codes and Regulations

Standards, Codes and Regulations Standards, Codes and Regulations 1.0 Introduction The production of a European standard for reinforcing steels began in 1988. The key stumbling block to bringing this to fruition was the inability to agree

More information

THIRD-PARTY STEEL PRODUCT CERTIFICATION

THIRD-PARTY STEEL PRODUCT CERTIFICATION REF: ASI TN010 Version 1 ASI Head Office Level 13, 99 Mount Street North Sydney NSW 2060 Tel: 02 9931 6666 Email: enquiries@steel.org.au (ABN)/ACN (94) 000973 839 www.steel.org.au ASI TECHNICAL NOTE TN010

More information

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to

More information

Mechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1

Mechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1 381 Mechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1 Abstract Welded Steel Pipe (WSP) is arguably the most widely utilized pipe material for the transmission of water throughout

More information

WELDING TECHNOLOGY DEGREES AND CERTIFICATES. Welding Technology Degree. Shielded Metal Arc Plate and Pipe (270 hours) Certificate

WELDING TECHNOLOGY DEGREES AND CERTIFICATES. Welding Technology Degree. Shielded Metal Arc Plate and Pipe (270 hours) Certificate Area: Technical Education Dean: Dr. Trish Caldwell Phone: (916) 484-8354 Counseling: (916) 484-8572 www.arc.losrios.edu/~welding/ The American Welding Society (AWS) nationally accredits American River

More information

Standards, Codes and Regulations

Standards, Codes and Regulations Standards, Codes and Regulations 1.0 Introduction The production of a European standard for reinforcing steels began in 1988. The key stumbling block to bringing what may be regarded as a normal European

More information

Metal Pressfitting Pipe Systems

Metal Pressfitting Pipe Systems VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing

More information

SERIES NG 1800 STRUCTURAL STEELWORK

SERIES NG 1800 STRUCTURAL STEELWORK MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General

More information

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages

More information

SECTION 4: Cable Ladder Stainless Steel & Aluminium

SECTION 4: Cable Ladder Stainless Steel & Aluminium SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General

More information

Welded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction

Welded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction Welded Fabric 1.0 Introduction Welded fabric, often referred to as mesh, is a machine welded grid arrangement of reinforcing bars or wires. It is covered by British Standard BS4483. This was revised in

More information

Guiding Principles for the contents of Particular Materials Appraisals (Version approved at the WGP on 21 November 2006)

Guiding Principles for the contents of Particular Materials Appraisals (Version approved at the WGP on 21 November 2006) PE- 03-28 - rev 5 21 November 2006 Page 1 of 5 Guiding Principles for the contents of Particular Materials Appraisals (Version approved at the WGP on 21 November 2006) Introduction A Particular Material

More information

ALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST

ALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.

More information

RPV - RP - RA air handling units

RPV - RP - RA air handling units APPLICATIONS Heating, ventilation, cooling >> FACTORIES >> WAREHOUSES >> HALLS >> DISTRIBUTION CENTRES >> COMMERCIAL PREMISES >> PLACES OF WORSHIP RPV - RP - RA air handling units www.reznor.eu RPV - RP

More information

1.3.3 When pipe is required for close coiling, this should b specified on the order.

1.3.3 When pipe is required for close coiling, this should b specified on the order. SA 36* SA 53* Covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded contrsuction of bidges and buildings, and for general structural purposes. When the

More information

TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE

TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE A) IS: 3589 GRADE FE 330 This tender specification establishes the minimum requirements for the manufacture of IS: 3589 Grade Fe330 Bare

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS

More information