Martin Series 800 Conveyor Sprockets
|
|
|
- Claud Davidson
- 9 years ago
- Views:
Transcription
1 Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT. # 4,964,842 Split 815/820 Solid and Grooved Face with Guide Ring Holes Steel and Thermoplastic 821 Heavy Duty for Wide Hinged Chain Straight Running t880 and 882 Single Duty for Side Flex Chains 881 for Side Flex Chain 815, 820, and 881 sprockets are all double duty. Sprockets with an odd number of teeth are recommended to reduce wear since a given tooth engages the chain every other revolution. Sprockets with 19, 21, 23, and 25 teeth are preferred. Sprockets with even number of teeth should be advanced one tooth periodically to attain even wear. A-6
2 Split Martin QRS Split Sprocket Series 815/820 Split Sprockets for Flat Top Conveyor Chains Split Sprockets Manufactured from Steel and Thermoplastic Material Stocked in 21, 23, 25, and 27 Tooth Sizes Martin s Quick Replacement Split Sprocket eliminates the time-consuming and costly dismounting of shafts and pillow blocks to remove worn sprockets all that s required is a wrench QRS Split Thermoplastic Sprocket Advantages: Lightweight Service Temp. to 300 F Low Temp. Toughness Excellent Resistance to Oils, Grease, Soaps, and Detergents Outstanding Abrasion and Impact Resistance Available with solid and grooved face and furnished with rust resistant plated steel bolts and nuts Split (plated carbon steel and stainless) Guide Rings available, if necessary, for easy assembly Proudly made in U.S.A. Call your Martin Distributor PAT. # 4,964,842 A-7
3 Split Steel and Thermoplastic Stock Bore Series 815 Sprockets Split Steel QRS815A / /4 1-1/2 5.0 (129.26) (130.0) (19.1) (38.1) (2.27) QRS815A / /4 1-1/2 5.6 (141.22) (142.0) (19.1) (38.1) (2.54) QRS815A / /4 1-1/2 6.6 (153.21) (154.2) (19.1) (38.1) (3.0) QRS815A / /4 1-1/2 7.8 (165.20) (166.6) (19.1) (38.1) (3.54) Supplied with 5/16-18 standard 90 to split. Series 815 Sprockets Split Thermoplastic QRS815A21P / /4 1-1/2.94 (129.26) (130.0) (19.1) (38.1) (.43) QRS815A23P / /4 1-1/ (141.22) (142.0) (19.1) (38.1) (.45) QRS815A25P / /4 1-1/ (153.21) (154.2) (19.1) (38.1) (.50) QRS815A27P / /4 1-1/ (165.20) (166.6) (19.1) (38.1) (.57) Thermoplastic temperature operating range 20 F to +300 F Supplied with 5/16-18 standard 90 to split. Series 820 Sprockets Split Steel QRS820A / /4 1-1/2 5.0 (129.26) (130.0) (19.1) (38.1) (2.27) QRS820A / /4 1-1/2 5.6 (141.22) (142.0) (19.1) (38.1) (2.54) QRS820A / /4 1-1/2 6.6 (153.21) (154.2) (19.1) (38.1) (3.0) QRS820A / /4 1-1/2 7.8 (165.20) (166.6) (19.1) (38.1) (3.54) Supplied with 5/16-18 standard 90 to split. Series 820 Sprockets Split Thermoplastic QRS820A21P / /4 1-1/2.94 (129.26) (130.0) (19.1) (38.1) (.43) QRS820A23P / /4 1-1/ (141.22) (142.0) (19.1) (38.1) (.45) QRS820A25P / /4 1-1/ (153.21) (154.2) (19.1) (38.1) (.50) QRS820A27P / /4 1-1/ (165.20) (166.6) (19.1) (38.1) (.57) Thermoplastic temperature operating range 20 F to +300 F Supplied with 5/16-18 standard 90 to split. For Guide Ring Specifications See page A-12. A-8 Solid Face PAT. # 4,964,842 Grooved Face
4 Series 821 Sprockets Semi-Steel Stock Bore Actual Effective Diameter Diameter Stock Maximun 821A /2 821A /2 821A /2 821A /2 821A /2 821 Series also runs with 815 H chain /4 6.7 (129.26) (130.0) (25.4) (44.5) (3.0) /4 7 (141.22) (142.0) (25.4) (44.5) (3.2) /4 7.3 (153.21) (154.2) (25.4) (44.5) (3.3) /4 7.6 (165.20) (166.6) (25.4) (44.5) (3.4) /4 8.0 (177.24) (179.1) (25.4) (44.5) (3.6) 3-1/8" 1-5/8" Series 880 Sprockets Semi-Steel Stock Bore Diameter Diameter Actual Effective Stock Maximun 880C /4 1-3/4 2.8 (111.40) (110.0) (19.1) (44.5) (1.3) 880C /4 1-3/4 3.2 (123.29) (122.4) (19.1) (44.5) (1.4) 880C /4 1-3/4 3.4 (135.22) (134.9) (19.1) (44.5) (1.5) 880C /4 1-3/4 3.6 (147.22) (147.3) (19.1) (44.5) (1.6) 880C /4 1-3/4 4.2 (182.26) (184.4) (19.1) (44.5) (1.9) Block Body Other sizes are arm body. 5/8" 1-5/8" Series 881 Sprockets Semi-Steel Stock Bore Diameter Diameter Actual Effective Stock Maximun 881C / (129.26) (130.05) (19.1) (44.5) (1.9) 881C / (141.22) (141.99) (19.1) (44.5) (2.1) 881C / (153.21) (154.18) (19.1) (44.5) (2.3) 1-5/8" 1-1/4" A-9
5 Series 820 Sprockets Semi-Steel Stock Bore 820A13B / /4 1-1/4 2.4 (81.99) (79.0) (19.1) (31.8) (1.1) 820A15B / /4 1-1/4 3.6 (93.68) (92.2) (19.1) (31.8) (1.6) 820A17B / /4 1-11/ (105.49) (104.7) (19.1) (42.9) (2.1) 820A / /4 1-1/4 3.1 (117.35) (117.1) (19.1) (31.8) (1.5) 820A /4 1-1/4 3.8 (123.29) (123.4) (19.1) (31.8) (1.7) 820A / /4 1-3/4 4.6 (129.26) (130.0) (19.1) (44.5) (2.1) 820A21B / /4 2-1/2 7.1 (129.26) (130.0) (19.1) (63.5) (3.3) 820A /4 1-3/4 4.2 (135.23) (135.9) (19.1) (44.5) (1.9) 820A / /4 1-3/4 5.3 (141.22) (142.0) (19.1) (44.5) (2.4) 820A /4 1-3/4 4.4 (147.22) (148.1) (19.1) (44.5) (2.0) 820A / / (153.21) (154.2) (19.1) (50.8) (2.4) 820A25B / /4 3-3/ (153.21) (154.2) (19.1) (81.0) (4.4) 820A / / (165.20) (166.6) (19.1) (50.8) (2.8) 820A / / (177.24) (179.1) (19.1) (50.8) (3.1) 820A / / (189.28) (191.3) (19.1) (50.8) (3.1) 820A / /4 2-1/ (249.58) (252.2) (19.1) (64) (7.1) Block Body Other sizes are arm body. Max. bore shown is with Standard Keyway and Setscrew. 820 Series stocked grooved. (Guide ring holes in 21, 23, 25, and 27 tooth sizes can be provided upon request). Steel Series 820 Sprockets Semi-Steel Bored-to-Size 820BS19 1" (25.4) 820BS21 1" (25.4) Inch/Metric Stock Finished Bores With Standard Keyway and Setscrew 820BS23 7/8" (22.2) 1" (25.4) 1-1/8" (28.6) 1-3/16" (30.2) 1-1/4" (31.8) 820BS25 1" (25.4) 1-3/16" (30.2) 1-1/4" (31.8) 820BS27 1" (25.4) Stock grooved without guide ring holes. All arm body. Cast A-10
6 Series 815 Sprockets Semi-Steel Stock Bore Actual Effective Diameter Diameter Stock Maximun 815A13B /2 815A15B /2 815A17B /2 815A /2 815A A /2 815A21B /2 815A A /2 815A A /2 815A25B /2 815A /2 815A /2 815A /2 815A /2 Block Body Other sizes are arm body. Max. bore shown is with Standard Keyway and Setscrew. 815 Series stocked not grooved, with guide ring holes /4 1-1/4 2.4 (81.99) (79.0) (19.1) (31.8) (1.1) /4 1-1/4 3.6 (93.68) (92.2) (19.1) (31.8) (1.6) /4 111/ (105.49) (104.7) (19.1) (42.9) (2.1) /4 1-1/4 3.1 (117.35) (117.1) (19.1) (31.8) (1.5) /4 1-1/4 3.8 (123.29) (123.4) (19.1) (31.8) (1.7) /4 1-3/4 4.6 (129.26) (130.0) (19.1) (44.5) (2.1) /4 2-1/2 7.1 (129.26) (130.0) (19.1) (63.5) (3.3) /4 1-3/4 4.2 (135.23) (135.9) (19.1) (44.5) (1.9) /4 1-3/4 5.3 (141.22) (142.0) (19.1) (44.5) (2.4) /4 1-3/4 4.4 (147.22) (148.1) (19.1) (44.5) (2.0) / (153.21) (154.2) (19.1) (50.8) (2.4) /4 3-3/ (153.21) (154.2) (19.1) (81.0) (4.4) / (165.20) (166.6) (19.1) (50.8) (2.8) / (177.24) (179.1) (19.1) (50.8) (3.1) / (189.28) (191.3) (19.1) (50.8) (3.1) /4 2-1/ (249.58) (252.2) (19.1) (64) (7.1) Steel Series 815 Sprockets Semi-Steel Bored-to-Size 815BS19 1" (25.4) 815BS21 1" (25.4) Inch/Metric Stock Finished Bores With Standard Keyway and Setscrew 815BS23 7/8" (22.2) 1" (25.4) 1-1/8 (28.6) 1-3/16" (30.2) 1-1/4 (31.8) 815BS25 1" (25.4) 1-3/16" (30.2) 1-1/4 (31.8) 815BS27 1" (25.4) Stock grooved without guide ring holes. All arm body. Cast A-11
7 Series 800 Series 822 Sprockets Stock Bore 882C /4 1-3/4 3.8 (111.40) (112.5) (19.1) (44.5) (1.8) 882C /4 1-3/4 4.2 (123.29) (125.0) (19.1) (44.5) (1.9) 882C /4 1-3/4 4.4 (135.25) (137.40) (19.1) (44.5) (2.1) 882C /4 1-3/4 4.6 (147.21) (149.90) (19.1) (44.5) (2.2) Arm Body Other sizes are block body. 815 Guide Rings Steel and Stainless Steel H Thick Per Set GR /16.23 GR15-16SS (91.9) (1.6) (.10) GR /16.26 GR17-18SS (104.4) (1.6) (.120) GR /8.37 GR19-20SS (116.3) (3.2) (.17) GR /8.44 GR21-22SS (129.3) (3.2) (.20) GR /8.46 GR23-24SS (141.2) (3.2) (.21) GR /8.47 GR25-26SS (153.4) (3.2) (.21) GR /8.53 GR27-28SS (165.9) (3.2) (.24) GR /8.56 GR29-30SS (178.3) (3.2) (.25) GR /8.67 GR31-32SS (190.5) (3.2) (.30) GR /8.92 GR41-42SS (251.2) (3.2) (.42) H Carbon Steel Stainless Steel A-12
Rex 815 TableTop Chain Straight Running
Prefix S SS SSB 815 Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 2-1/4 2. 57. 2 - - 1.43 2.12 2-5/8 2.63 66. 7 - - 1.60 2.37 3-1/4 82. 6 - - 1.84 2.73 4 4.00 101. 6 - - 2.14 17 4-1/2
Roller Chain Coupling
Roller Chain Coupling Features 1. Simple structure A roller chain coupling consists of one duplex roller chain and two sprockets for a simplex chain. Handling is very simple as both the shafts (driving
Tube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
INSTALLATION and OPERATION RANGE BALL CONVEYOR MODEL NO: BC-001AN
Easy Picker Golf Products, Inc. 415 Leonard Blvd. N., Lehigh Acres, FL 33971 PH: 239-368-6600 FAX: 239-369-1579 Service: 800-982-4653 SALES: 800-641-4653 www.easypicker.com [email protected] INSTALLATION
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
INSTRUCTION MANUAL (WINDOW WIPER)
INSTRUCTION MANUAL (WINDOW WIPER) SUBJECT CONTENTS PAGE 1. GENERAL 2 2. CONTRUCTION 2 2-1. STRAIGHT LINE TYPE WINDOW WIPER 2 2-2. CONTROL BOX 2 2-3. SPARE PARTS 2 3. MECHANISM AND OPERATION 2 3-1. STRAIGHT
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS 3 TIMKEN BALL BEARING HOUSED UNITS DESIGNED FOR OPTIMIZED PERFORMANCE For more than 110 years, Timken innovations continue to keep the world in motion, including
GEAROLOGY 2-1 SPUR GEARS SPUR GEARS
GEAROLOGY 2-1 2 2-2 GEAROLOGY COMMON APPLICATIONS: Spur gears are used to Now that you ve been introduced to both Boston Gear and some of the basics of our Gearology course which we like to call Power
12. REAR WHEEL/BRAKE/SUSPENSION
12 12 12-0 SERVICE INFORMATION... 12-1 REAR BRAKE... 12-5 TROUBLESHOOTING... 12-2 REAR SHOCK ABSORBER... 12-8 REAR WHEEL... 12-3 REAR FORK... 12-9 SERVICE INFORMATION GENERAL INSTRUCTIONS When installing
300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner
MASTER APG C-FACE AND SEPARATE REDUCERS
INSTRUCTION MANUAL 499983 MASTER APG C-FACE AND SEPARATE REDUCERS INSTALLATION AND PARTS FOR APG SIZE 1 For APG Sizes 2 through 8, refer to manual 499972 WARNING: Because of the possible danger to person(s)
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
For New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
CHAIN CARE & TROUBLE SHOOTING
Fatigue Failure Bushing Fatigue Stress Corrosion Stress Corrosion and Hydrogen Embrittlement These closely related failures are similar in appearance and nature. They appear as cracks which initiate at
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive
* 20 8 RN. 74 Guide Bars HERE S HOW THE OREGON SAW BAR. 12" 14" 18" 20" 36" (Etc.) 0=.050" 8=.058" 3=.063" 4=.043"
74 Guide Bars HERE S HOW THE OREGON SAW BAR * 20 8 RN Length in Inches 12" 14" 18" 20" 36" (Etc.) Gauge 0=.050" 8=.058" 3=.063" 4=.043" GUARD MATE HOLES These holes are built into the noses of certain
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Flex SNB C 2.3 page 3-10 uni Flex SNB C 1.6 page 11-18 uni Flex SNB 2.3 page
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
Part No. Quantity Description Diameter Length
PUSHRODS SMALL BLOCK CHEVROLET SWEDGED END PUSHRODS.080 WALL 1010 STEEL 3 Heat treated and black oxide finish 3 For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and
Contents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125
ELATECH Polyurethane belts 2 Introduction to ELATECH polyurethane belts 2 Page Contents ELATECH M and V 3 Introduction 4 Tension cords 4 Products certifications 4 Mechanical and chemical properties 4 Executions
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
EAGLE Pd BELT SYNCHRONOUS. APPLICATIONS Goodyear Eagle Pd belts and sprockets are ideal on a wide variety of applications in all industries.
EAGLE Pd BELT 6 No: B-1750 B Blue =, 35 Width 1750 1750 Length A REVOLUTIONARY BREAKTHROUGH IN BELT TECHNOLOGY Much more than an alternative to chain and V-belt drives, Goodyear s Eagle Pd is a total product
The word teamster today means a truck driver,
Page 47 Heron of Alexandria The word teamster today means a truck driver, but originally it meant a wagon driver, someone who drives a team of horses, mules or oxen. Over 2000 years ago teamsters in the
Radial Insert Ball Bearings Housing Units. Our Expertise is Your Benefit. Schaeffler Group Industrial
Radial Insert Ball Bearings Housing Units Our Expertise is Your Benefit Schaeffler Group Industrial A p p l i c a t i o n s Quality for every eventuality: Radial insert ball bearings in industry Radial
AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN
AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete
Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
DODGE USAF 200/300 Direct Mount Pillow Block Bearings
DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. WARNING: To ensure that drive is not unexpectedly started, turn off and
Helical Gears K HG 1-20 R. Table of Contents. Catalog Number of KHK Stock Gears. Helical Gears. (Example) Direction of Helix (R) No.
Table of Contents Special Characteristics, Points of Caution in Selecting and Using... page 130 KHG Ground... page 134 SH... page 144 Catalog Number of KHK Stock Gears The Catalog Number for KHK stock
Gunite Disc Brake Rotors
Gunite Disc Brake Rotors Maintenance Manual Gunite is the industry leader in the development of brake system components for heavy-duty truck applications including air disc brake rotors. Gunite was the
SHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
FOR ANY QUESTIONS, PLEASE CALL US @ 727.347.9915 M-F 8:00a.m.-8:00p.m. EST. REAR BRAKES 1 AEROSPACE COMPONENTS 727.347.9915
REAR BRAKES 1 AEROSPACE COMPONENTS 727.347.9915 REAR BRAKES Before getting started, remove all stock braking components. Pre-assembly of parts: Clean the bolts and the threads in the hat with acetone.
POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Designing and Drawing a Sprocket Visualizing ideas through the creation of CAD solid models is a key engineering skill.
05 Webster St. Hanover Massachusetts 0339 Tel. 78 878 5 Fax 78 878 6708 Designing and Drawing a Sprocket Visualizing ideas through the creation of CAD solid models is a key engineering skill. The following
Ammeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni MP C page 3-6 uni MP 16% page 7-10 uni MP 18% page 11-14 uni MP 20% page 15-18
Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
Stainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: [email protected]
Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540
92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540 www.airliftperformance.com MN-514 (06409) NPR 4762 Please read these instructions completely before proceeding with installation
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
6 CHARGE & START. ALTERNATORS STARTERS BATTERIES Cables Terminals ConneCTors. Parts for Trucks, Trailers & Buses
Parts for Trucks, Trailers & Buses BUS PARTS 6 Proven, reliable and always innovative. TRP offers reliable aftermarket products that are designed and tested to exceed customers expectations regardless
000594 Eye-bolt for front chain adjustment, Pre-49 singles, 1949-55 twins, 1958-on CS singles 7.60 6.33
Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo
MANUAL TRANSMISSION CONTENTS ...
22D-0-1 MANUAL TRANSMISSION CONTENTS GENERAL INFORMATION... 22D-0-3 1. SPECIFICATIONS... 22D-1-1 TRANSMISSION MODEL TABLE GENERAL SPECIFICATIONS SERVICE SPECIFICATIONS TORQUE SPECIFICATIONS............
BICO CHIPMUNK JAW CRUSHER - TYPE WD
BICO CHIPMUNK JAW CRUSHER - TYPE WD The Bico Chipmunk Jaw Crusher is designed to give long and efficient service. In order to secure the long life and excellent performance that your crusher is capable
Hydraulic multidisc Brake H420
S320gb - rev 02/09 S E R V I C E Hydraulic multidisc Brake H420 A N U A L WARNER ELECTRIC EUROPE Rue Champfleur, B.P. 20095, F- 49182 St Barthélemy d Anjou Cedex Tél. +33 (0)2 41 21 24 24, Fax + 33 (0)2
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
Sense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
FRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
MSA Saddle Machine Parts & Operating Manual
Machine Model Serial # Po Box 472110, Tulsa, OK 74147 Toll Free: 800-725-7311 918-447-1288 office 918-447-0188 fax www.mathey.com USA MSA Saddle Machine Parts & Operating Manual Part Number: 03-0100-000
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
The world leader in conveyor pulleys
The world leader in conveyor pulleys You ask. We Deliver. Chantland pulleys and rollers come in virtually any diameter, wall thickness, length, shaft size or end type. They re built from stainless steel,
Lightweight, Heavy Duty
Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.
POLYURETHANE TIMING BELTS
B212 POLYURETHANE TIMING BELTS BRECOflex CO., L.L.C. translates the customers needs into new and expanded product lines. We are committed to partner with our customers in providing unique solutions and
TECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
ADVANCE ADAPTERS INC. Fixed Yoke kit (S.Y.E. Kit)
ADVANCE ADAPTERS INC. Fixed Yoke kit (S.Y.E. Kit) Instruction Sheet P/N: 50-7905 & 50-7906 KIT CONSISTS OF: No. Qty Part No. Description 1. 1 51-7906 TAILHOUSING, DIECAST 2. 1 52-7905 SHAFT, MAIN OUTPUT
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
Timber Processing Wallboard Conveyor Enmasse Systems Fulton, IL / USA
81X Series Products Timber Processing Wallboard Conveyor Enmasse Systems Fulton, IL / USA 2 Made in ISO 9001 REGISTERED 100 years...of advanced engineering knowledge and experience adds up to the best
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment Whatever You Rebuild, Repair and Protect...... Find the Right Solution! Henkel's Solutions for all Surface Engineering Needs
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
Item No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject to change at anytime
GEAROLOGY 4-1 WORMS AND WORM GEARS WORMS AND WORM GEARS
GEAROLOGY 4-1 4 4-2 GEAROLOGY COMMON APPLICATIONS: Worm and worm gear sets are used in many, everyday products including: electrical mixers, hubometers, right Now that you have an understanding of two
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. 2 0 0 5 D U K E A I R X C / S L / R A C E S E R V I C E G U I D E Information
Operator s Manual. Pressure Injection Cell Model PC8500. Congratulations! Contents
Operator s Manual Pressure Injection Cell Model PC8500 Congratulations! Congratulations on your purchase of a Next Advance Pressure Injection Cell. Please read this operator s manual which explains proper
MSA Saddle Machine Parts & Operating Manual
Machine Model Serial# Register product online @ www.mathey.com PO Box 472110 Tulsa, OK 74147 USA Toll Free: 800-725-7311 918-447-1288 office 918-447-0188 fax www.mathey.com MSA
Nose-Over Conveyor Design Manual. Nose-Over Conveyor 1500, 7526, 1625, 8500 Series MatTop Chain
Nose-Over Conveyor Design Manual Nose-Over Conveyor 1500, 7526, 1625, 8500 Series MatTop Chain Contents Safety Considerations Introduction Dynamic Nose-Over Bar (1500 and 8500 Series):... 4 Dynamic Nose-Roller
METHOD STATEMENT INSTALLATION OF INSULATING FLANGE KITS
METHOD STATEMENT INSTALLATION OF INSULATING FLANGE KITS Revision Date Prepared By Approved By Method Statement IF Kits BAC Corrosion Control Limited Stafford Park 11 Telford TF3 3AY Tel: 01952 290321 Fax:
AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION
AXLE SHAFTS - FRONT 1998 Pontiac Bonneville 1998-99 DRIVE AXLES FWD Axle Shafts - Cars - "C", "G" & "H" Bodies GM Aurora, Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue, Regency, Riviera MODEL IDENTIFICATION
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
Sarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover
Caution: Read entire label before using product. Do-It-Yourself PAINT RESTORER KIT Kit Contains: 1-16 oz. Water-based, Biodegradeable Liquid Prep 1-16 oz. Aerosol Shine Spray 1 - Spray Nozzle 2 - Scrub
INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
OD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
WARNING! Failure to follow these inspection procedures can cause personal injury and property damage.
GARDNER-DENVER TECHNICAL MANUAL CPTEN-136 07/03 Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model.: Hoist Serial.: WARNING! Failure to follow these inspection procedures can cause
DiscPlus DX195 and DX225 Air Disc Brakes
Revised 11-04 Technical Bulletin Revised 1 Technical 11-04 Bulletin DiscPlus DX195 and DX225 Air Disc Brakes Inspection, Installation and Diagnostics Air Disc Brake Inspection Intervals and Procedures
1 Important Safety Procedures. Qualified maintenance personnel should read and follow these straightforward instructions.
Installation, Operating and Maintenance Instructions XL Series Actuators Contents Important Safety Procedures Mounting and Operating Instructions Piping Instructions Solenoid Valves on Spring Return Actuators
Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
6SA Saddle Machine Part Number: 03-0106-000 Parts & Operating Manual
Machine Model Serial # Po Box 472110, Tulsa, OK 74147 USA Toll Free: 800-725-7311 918-447-1288 office 918-447-0188 fax www.mathey.com 6SA Saddle Machine Part Number: 03-0106-000 Parts & Operating Manual
ALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
Model # 940P-V6. Page 1 of 11
Model # 940P-V6 Page 1 of 11 Page 2 of 11 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either