THERMOTEK SELF ADHESIVE MEMBRANE OVER METAL SYSTEM DESCRIPTION SELF ADHESIVE SYSTEM METAL (10 YR) AP-SABS-SACS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "THERMOTEK SELF ADHESIVE MEMBRANE OVER METAL SYSTEM DESCRIPTION SELF ADHESIVE SYSTEM METAL (10 YR) AP-SABS-SACS"

Transcription

1 THERMOTEK SELF ADHESIVE MEMBRANE OVER METAL SYSTEM DESCRIPTION SELF ADHESIVE SYSTEM METAL (10 YR) AP-SABS-SACS 1 0 No 0. SUBSTRATE 1. ASPHALT PRIMER. THERMOTEK SELF ADHESIVE 1.5 FV SMOOTH. THERMOTEK SELF ADHESIVE.0 FP GRANULE SYSTEM COMPONENTS AND WEIGHTS Product Warranty Coverage (100 sq. ft.) Dry Weight Lb Dry Mils 10 years 10 years 1 ASPHALT PRIMER 1 gallon. LB/SQ 6. Mils SYSTEM THERMOTEK SELF ADHESIVE 1.5 FV SMOOTH THERMOTEK SELF ADHESIVE.0 FP GRANULE 180 sq ft 89 sq ft 40.5 LB/SQ LB/SQ Mils Mils SYSTEM 18.8 LB/SQ 18.6 Mils CRITICAL POINTS THERMOTEK DURAMASTIC THERMOTEK SELF ADHESIVE 1.5 FV SMOOTH OPTIONAL TITLE 4 SILVER + GOLD + PLATINUM + SILVER + GOLD + PLATINUM + 1 THERMOTEK COATING 1 gallons 6.4 LB/SQ 7.5 LB/SQ 7.67 LB/SQ 6.86 Mils 8.06 Mils 8. Mils THERMOTEK COATING 1 gallons 6.4 LB/SQ 7.5 LB/SQ 7.67 LB/SQ 6.86 Mils 8.06 Mils 8. Mils ADD TO SYSTEM LB/SQ LB/SQ LB/SQ +1.7 Mils Mils Mils ADDITIONAL WARRANTY ( + YEARS ) + 0 years + 1 years + years + 0 years + 1 years + years Note: Detail system information in file SELF ADHESIVE SYSTEM METAL (10 YR) AP-SABS-SACS (attached USB.) 1

2 PART 1 GENERAL 1.1 GENERAL This document provides specifications for the application of product to roofing surface. This specification should be used only as a general guide, with the addition of specific details as different job conditions warrant. These tools include roofing products, coverage rate, installation procedures with THERMOTEK Roofing Products and complementary products. Final determination of the fitness of the application of any THERMOTEK product shall not be made by anyone other than an authorized representative of THERMOTEK Roofing Products. 1.1 APPLICABLE PUBLICATIONS: The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by the basic designation only. A. American Society for Testing and Materials Publication (ASTM) B. Underwriters Laboratories Inc. (U.L.) C. CRRC Cool Roof Rating Council D. California Building Standards Code - Title 4 E. THERMOTEK Details, Drawings and Notes 1. QUALITY CONTROL A. Warranty: The contractor shall warrant 5 years, from the date of completion of the work by waterproof system is free from defects in materials and workmanship, all work repairs during this period must be performed by the contractor. Any additional warranty must be provided by the contractor to the owner. B. The manufacturer shall certify that the materials submitted have been used in like application and that they have been actively engaged in the manufacture of these materials for a minimum period of 10 to 1 years prior to Submittals, as required. The manufacturer shall certify that the contractor is authorized and approved for the Application of their materials. C. Applicator Qualifications 1) The applicator shall have general knowledge and general understanding of roofing as well as all THERMOTEK Roofing products for any given specified project. ) For all warranties, a firm, which has complete business stability, shall perform the work in this section, present a copy of certification upon request by the Architect or the owner. ) The installer, owner or Architect must review all the documents related all critical points and check list. 4) For different roofing details the installer, owner or Architect must contact a THERMOTEK roofing representative for details, terms and conditions for warranty, All issues concerning the roof must be resolved by written way. 1. SUBMITTALS A. In the normal course of bidding, descriptive literature, technical data, and wet or dry samples of all materials proposed for use under this specification shall be submitted upon request. 1.4 JOB CONDITIONS A. To proceed with proper conditions, the applicator must be aware of the following: 1) UV curing time for all products is critical. The applicator must allow for sufficient cure time for each product. Please be aware that outside temperatures will be a factor. ) Do not begin work if rain or heavy dew is expected within twenty-four to forty-eight (4-48) hours of application. ) Do not begin work if temperatures are expected to fall below 50 degrees Fahrenheit and over 104 degrees Fahrenheit during the duration of the job. 4) Other environmental conditions such as humidity, mist, dew, extreme temperatures, and condensation can affect products in an inconsistent way. 1.5 PRODUCT STORAGE AND HANDLING A. All products should be stored in a warm, dry, clean, well-ventilated area. Store above 40 degrees Fahrenheit at all times. 1.6 PROTECTION OF PROPERTY: A. Contractor shall take proper precautions to protect owners property against damage and overspray. The use of shield boards, maskings and protective coverings shall be used as necessary. THERMOTEK is not responsible for damages caused by the overspray of any of its products.

3 SYSTEM COMPONENTS AND WEIGHTS *APPROXIMATE OPTIONAL COATING TO REFLECTIVE FINISHED (TITLE 4 COMPLIANCE) PART PRODUCTS.1 MATERIALS A. THERMOTEK Self Adhesive.0 FP Granule B. THERMOTEK Self Adhesive 1.5 FV Smooth C. Asphalt Primer (ASTM D 41) OPTIONAL COATING TO REFLECTIVE FINISHED (TITLE 4 COMPLIANCE) A. THERMOTEK SILVER PLUS. B. THERMOTEK GOLD PLUS C. THERMOTEK PLATINUM PLUS. PRELIMINARY DETAIL INSPECTION Inspect Preliminary Work/Flashing Details for problem areas (e.g., gaps, cracks, fishmouths, air pockets, etc.) to ensure that work is complete and satisfactory. Inform Project Architect and THERMOTEK Technical Territory Representative when all preliminary work and flashing details will be complete and the Installer is ready to proceed with application of THERMOTEK ROOFGUARD Elastomeric Roofing Membrane. Allow a minimum of two weeks for the interim inspection. Any final roofing installation prior to this interim inspection is subject to rejection by the Project Architect and/or the THERMOTEK. Please be advised that technical on-site support for instructing certified contractors in the proper application of the THERMOTEK ROOFGUARD Roofing System is available.. PROCEDURE, COVERAGE RATE & APPLICATION INSTRUCTIONS. A. Surface Preparation: Surface to be repaired or coated must be clean, dry and free of dust, dirt, grease, wax, or other incompatible substances. THERMOTEK Self Adhesive restoration System is approved for application over CONCRETE roofs having positive drainage. 1) Add additional fasteners to tighten laps where gaps exist. Gaps should not exceed ¼ inch in width. ) Stripped, loose or missing fasteners should be replaced with the next larger diameter fastener size. Check all fasteners to ensure they are tight. ) Unsound rust should be scraped, wire brushed or sand blasted to remove all loose rust 4) Panels that are rusted to the point where their structural integrity may be compromised should be replaced with new panels to match the existing. 5) Damaged panels should be replaced. New metal must be clean and oil free. 6) Remove all asphaltic-based patching and flashing materials. Do not apply solvents to remove asphaltic-based materials. Remove asphalt coating with power washing, scraping or brushing. 7) Remove all silicone caulks and sealants. Acrylic coatings, primers and flashing grade products will not bond to silicone caulks, sealants or coatings.

4 8) Remove and replace deteriorated pipe boots and other flexible flashing materials. 9) Surface to be repaired or coated must be clean, dry and free of dust, dirt, grease, wax, or other incompatible substances, with THERMOTEK WASH and clean water, using power wash machine (1500 psi- 1 feet away). 10) All necessary repairs shall be made to the existing roof according to NRCA (National Roofing Contractors Association) guidelines. B. Apply a ASPHALT PRIMER (ASTM D 41) over the surface. 1) The coverage rate for ASPHALT PRIMER (ASTM D 41 is 1 gallon per 100 square feet. ) In areas with mild rust apply an extra coat of ASPHALT PRIMER (ASTM D 41) at a coverage rate of 1 gallon per 100 square feet. ) In areas with deep rust it is recommended to change the metal sheet. C. Review all critical points over the Surface and repair them with THERMOTEK DURAMASTIC or Base Sheet THERMOTEK SELF ADHESIVE 1.5 FV. D. Apply THERMOTEK SELF ADHESIVE 1.5 FV smooth 1) The coverage rate for THERMOTEK SELF ADHESIVE 1.5 FV Smooth is a 1.80 SQ (theoretical coverage). E. Apply THERMOTEK SELF ADHESIVE.0 FP GRAVEL. 1) The coverage rate for THERMOTEK SELF ADHESIVE.0 FP GRANULE is a 0.89 SQ (theoretical coverage). OPTIONAL COATING TO REFLECTIVE FINISHED (TITLE 4 COMPLIANCE) F. Reflective Surfacing THERMOTEK ROOF COATING. 1) The coverage rate for THERMOTEK ROOF COATING is a.0 gallons per 100 square feet, two coats of 1.00 gallon per 100 square feet each. G. The applicator shall repair and/or replace any defective work found at the end of the job, before any warranties will be issued. PART WARRANTY*.0 WARRANTY A. This system is eligible for a 1. THERMOTEK SELF ADHESIVE 1.5 FV SMOOTH + THERMOTEK SELF ADHESIVE.0 FP GRANULE, 10 YEARS LIMITED WARRANTY B. This system is eligible for a TITLE 4 1. THERMOTEK SELF ADHESIVE 1.5 FV SMOOTH + THERMOTEK SELF ADHESIVE.0 FP GRANULE + THERMOTEK COATING SILVER PLUS = 10 YEARS LIMITED WARRANTY. THERMOTEK SELF ADHESIVE 1.5 FV SMOOTH + THERMOTEK SELF ADHESIVE.0 FP GRAVILE + THERMOTEK COATING GOLD PLUS = 11 YEARS LIMITED WARRANTY. THERMOTEK SELF ADHESIVE 1.5 FV SMOOTH + THERMOTEK SELF ADHESIVE.0 FP GRANULE + THERMOTEK COATING PLATINUM PLUS = 1 YEARS LIMITED WARRANTY Product Warranty a Product Warranty states that our product is free of any defects in manufacturing. THERMOTEK will replace the product when such product proves to be defective in manufacture as determined by THERMOTEK. PART 4 CARE AND MAINTENANCE 4.0 CARE AND MAINTENANCE PROGRAM In order to ensure that your THERMOTEK Roofing Products will continue to perform to its fullest, you should follow, implement and satisfy this Care and Maintenance program. A. Maintain a file for all records relating to this roof, including the THERMOTEK Roofing Products agreements, reports, invoices, repair and maintenance bills, original drawings and specifications, etc. B. Inspect the roof and coating at least twice each year, typically in the spring and fall. The most common areas of damage or distress are at drainage points, penetrations, perimeter flashings and in traffic areas. C. Pressure wash the coating as needed (and not less often than once every 1 months) in order to remove all dirt and debris on the surface. Wash using THERMOTEK WASH and clean water with appropriate pressure washing equipment (1500 psi 1 feet away). Surface should be maintained in clean white condition. Do not use anything but clean water unless directed by THERMOTEK Roofing Products and in such case, use only approved wash products. D. Inspect for damage from the elements after severe weather conditions, such as hailstorms, heavy rains, high winds, acts of God, etc. E. Arrange for prompt repairs necessary to correct non-guaranteed conditions affecting the roof surface. Repairs to the surface must be promptly performed by THERMOTEK Roofing Products approved contractors with approved products and repair methods that are consistent with the type and quality of the warranted coating so that such repairs will last as long as the THERMOTEK Roofing Products. F. Regularly remove any debris, such as leaves, branches, dirt, rocks, bottles, refuse, that may accumulate on the roof surface. Clean gutters, downspouts, scuppers, and surrounding roof areas ensure proper drainage. G. Examine all metal flashings, counter flashings, expansion joints and pitch pockets for rust, detachment, deteriorated sealant, and damage. Reattach loose metalwork. Replace sealant as necessary. Prepare and paint rusted surfaces. H. Examine masonry walls and copings for cracks, bad mortar joints, deteriorated sealant, loose masonry/coping stones, and indications of water absorption. Repair all such conditions to prevent water infiltration. I. Examine rooftop equipment such as air conditioners, ductwork, gooseneck vents, powered ventilators, evaporative coolers, antennas, equipment screens, skylights, satellite dishes, etc. for excessive movement, spillage of coolant, condensation, oil, grease, water/liquid release, etc., and damage to sheet metal cabinets and rubber or fabric gaskets that may allow water infiltration. Employ, keep and maintain drainage systems for release of water, etc. from rooftop equipment to avoid surface water buildup. Keep all roof top equipment in good condition. J. Regularly examine for any cracks, blistering, or flaking. Promptly contact THERMOTEK Roofing Products representative regarding any such cracks, blistering or flaking and recoat/patch any such areas with approved THERMOTEK products. 4

5 K. Minimize rooftop traffic. Establish paths which confine roof traffic to designated areas only. Service personnel should take care to avoid dropping tools, equipment, parts, etc. on the roof surface. Service personnel should not make any penetrations of or repairs to the coating. All work affecting the coating must be performed by an approved THERMOTEK Roofing Products contractor. This THERMOTEK Roofing Products Care and Maintenance information is intended to address conditions commonly found on buildings. Other conditions may exist that require special maintenance considerations. It is the responsibility of the Building Owner to ensure that the care and maintenance program followed for a particular building is adequate, given that building s specific conditions. END OF SECTION 5

THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER POLYSOCYANURATE SYSTEM DESCRIPTION TORCH SYSTEM OVER POLYISO (15,17,19 YR) TH/BS-TH/CS

THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER POLYSOCYANURATE SYSTEM DESCRIPTION TORCH SYSTEM OVER POLYISO (15,17,19 YR) TH/BS-TH/CS OPTIONAL TITLE 24 CRITICAL POINTS POLYISO THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER POLYSOCYANURATE DESCRIPTION TORCH OVER POLYISO (5,7,9 YR) TH/BS-TH/CS 2 No 0. SUBSTRATE. THERMOTEK USA PRO 2.0 FV

More information

THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER

THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER THERMOTEK MODIFIED BITUMEN TORCH MEMBRANE OVER DESCRIPTION TORCH OVER (15,17,19 YR) TH/BS-TH/CS 2 1 0 No 0. SUBSTRATE 1. THERMOTEK USA 2.0 FV TORCH SMOOTH 2. THERMOTEK USA PRO FP TORCH GRANULE COMPONENTS

More information

THERMOTEK SELF ADHESIVE MEMBRANE +G2 OVER WOOD SYSTEM DESCRIPTION SELF ADHESIVE OVER WOOD (8YR) BS-SA/CS

THERMOTEK SELF ADHESIVE MEMBRANE +G2 OVER WOOD SYSTEM DESCRIPTION SELF ADHESIVE OVER WOOD (8YR) BS-SA/CS THERMOTEK SELF ADHESIVE MEMBRANE +G OVER DESCRIPTION SELF ADHESIVE OVER (8YR) BS-SA/CS 1 0 No 0. SUBSTRATE 1. BASE SHEET G FIBER GLASS BASE. THERMOTEK SELF ADHESIVE 3.0 FP GRANULE COMPONENTS AND WEIGHTS

More information

TOPCOAT Liquid-Applied Roofing Systems TOPCOAT System Specifications EPDM

TOPCOAT Liquid-Applied Roofing Systems TOPCOAT System Specifications EPDM TOPCOAT Liquid-Applied Roofing Systems TOPCOAT System Specifications EPDM (TOPGN160) Updated: 7/14 TOPCOAT System Specifications EPDM PART 1 GENERAL 1.01 SYSTEM DESCRIPTION U.S. Only The TOPCOAT Roofing

More information

METAL ROOF RESTORATION SAMPLE DESIGN GUIDELINES

METAL ROOF RESTORATION SAMPLE DESIGN GUIDELINES METAL ROOF RESTORATION SAMPLE DESIGN GUIDELINES REFLECTICLEAN ACRYLIC/URETHANE Elastomeric Roofing Systems, Inc 6900 Bleck Dr. Rockford, MN 55373 800.403.7747 -or- 763.565.6900 fax: 763.565.6901 email:

More information

WESTERN COOL ROOF SYSTEMS Sustainable - Energy Efficient FLUID APPLIED REINFORCED ROOF SYSTEM

WESTERN COOL ROOF SYSTEMS Sustainable - Energy Efficient FLUID APPLIED REINFORCED ROOF SYSTEM WESTERN COOL ROOF SYSTEMS Sustainable - Energy Efficient FLUID APPLIED REINFORCED ROOF SYSTEM SPECIFICATION NO. SMAA-2P-8xE UPGRADE SMOOTH SURFACE / CAP SHEET / SINGLE PLY 2 PLY POLYESTER REINFORCED ACRYLIC

More information

BUILT-UP ROOF COATING SMOOTH and GRANULE SURFACE SPECIFICATION

BUILT-UP ROOF COATING SMOOTH and GRANULE SURFACE SPECIFICATION 07560 BUR BUILT-UP ROOF COATING SMOOTH and GRANULE SURFACE SPECIFICATION PART 1: GENERAL 1.01 SCOPE: To extend the useful service life of the aged or new asphalt built-up roof system and to reduce cooling

More information

How to repair your existing low slope flat roof.

How to repair your existing low slope flat roof. How to repair your existing low slope flat roof. Recycled Rubber Roofing is not a "Roof Coating." It is a liquid emulsion used as the underlayment of a new or retrofit, built-up roofing system. One of

More information

SECTION 073113 ASPHALT SHINGLES

SECTION 073113 ASPHALT SHINGLES 1320 / Talent Community Center 073113-1 ASPHALT SHINGLES PART 1 GENERAL 1.01 SECTION INCLUDES A. Asphalt shingle roofing. B. SBS roof membrane. SECTION 073113 ASPHALT SHINGLES C. Flexible sheet membranes

More information

A. This Section includes rubberized asphalt sheet membrane waterproofing systems.

A. This Section includes rubberized asphalt sheet membrane waterproofing systems. SECTION 07110 SHEET MEMBRANE WATERPROOFING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

Commercial Roof Inspection Form

Commercial Roof Inspection Form Inspection Date: Inspector: Building Information Building ID: No.: Used For: Year Roof Applied: Building Description: Permanent Temporary Building Type: Retail Industrial Residential Building Name: Building

More information

Colorado State University. Durrell Center Roof Repair

Colorado State University. Durrell Center Roof Repair Colorado State University Durrell Center Roof Repair SPECIFICATION: POLYURETHANE FOAM ROOFING l.0 GENERAL REQUIREMENTS The successful application of a polyurethane foam roofing system is dependent upon

More information

GUIDANCE NOTE No. 10 Waterproofing of Metal Profiled Sheet Roofing and Cladding

GUIDANCE NOTE No. 10 Waterproofing of Metal Profiled Sheet Roofing and Cladding GUIDANCE NOTE No. 10 Waterproofing of Metal Profiled Sheet Roofing and Cladding 1. Introduction The coating of profiled sheet roofs in order to extend the waterproofing life of such structures has long

More information

Read and understand all installation instructions and precautions before installing. GENERAL APPLICATION INSTRUCTIONS

Read and understand all installation instructions and precautions before installing. GENERAL APPLICATION INSTRUCTIONS AC TOPSEAL SELF-ADHERED, GRANULAR SURFACED, SINGLE PLY, LOW SLOPE ROLLED ROOFING 3 X 33.3 = 100 SQ. FT. 10 YEAR MATERIAL LIMITED WARRANTY For Use on Porches / Sheds / Utility Buildings / Accessory Buildings

More information

SECTION 07550 - MODIFIED BITUMINOUS MEMBRANE ROOFING. A. Vapor barrier (base ply); cover board at existing roof deck.

SECTION 07550 - MODIFIED BITUMINOUS MEMBRANE ROOFING. A. Vapor barrier (base ply); cover board at existing roof deck. SECTION 07550 - PART I GENERAL 1.01 SECTION INCLUDES A. Vapor barrier (base ply); cover board at existing roof deck. B. Roof insulation at new roof deck. C. Modified bitumen membrane. D. Fluid applied

More information

BLACK JACK ALL WEATHER ROOF COATING

BLACK JACK ALL WEATHER ROOF COATING PAGE: 1 of 6 PRINT DATE: 16/09/2004 BLACK JACK ALL WEATHER ROOF COATING DESCRIPTION BLACK JACK ALL WEATHER ROOF COATING is a solvent based, full bodied black brushable compound with added fibres for reinforcement.

More information

PAINTING OF CLARIFIER

PAINTING OF CLARIFIER 1 PAINTING OF CLARIFIER PART 1 GENERAL 1.01 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required for the surface preparation and application of shop painting systems on ferrous

More information

SECTION 07720 PREFORMED METAL STANDING SEAM ROOFING

SECTION 07720 PREFORMED METAL STANDING SEAM ROOFING SECTION 07720 PREFORMED METAL STANDING SEAM ROOFING PART ONE GENERAL DESCRIPTION This section includes pre-formed standing seam metal roofing and related flashings, closures, trim and accessories including,

More information

SKYLIGHT RESTORATION - SCOPE OF WORK- BASE BID 1

SKYLIGHT RESTORATION - SCOPE OF WORK- BASE BID 1 CITY OF SANTA ROSA CITY HALL WINGS 6-10 1.0 GENERAL SKYLIGHT RESTORATION - - BASE BID 1 A. Summary of work: 1. Information herein is provided as a general overview of the project scope, and as such, does

More information

SELF-INSPECTION CHECKLIST Maintain Your Roof and Identify Potential Issues With Bloom s Comprehensive Self-Inspection Guide

SELF-INSPECTION CHECKLIST Maintain Your Roof and Identify Potential Issues With Bloom s Comprehensive Self-Inspection Guide SELF-INSPECTION CHECKLIST Maintain Your Roof and Identify Potential Issues With Bloom s Comprehensive Self-Inspection Guide Inspection Questions? Call Bloom At 800-483-9932 www.bloomroofing.com DISCLAIMER

More information

Maintenance & Inspection Guide

Maintenance & Inspection Guide ADDRESSING THE NEEDS OF OUR CUSTOMERS AND THE ENVIRONMENT ONE high Performance roofing SOLUTION AT A TIME. Maintenance & Inspection Guide TABLE OF CONTENTS Topic: Page: I. Introduction 1 II. Maintenance

More information

NEOGARD. Preventive Maintenance Manual

NEOGARD. Preventive Maintenance Manual NEOGARD Preventive Maintenance Manual Fluid-Applied Roof Coating Systems December 2014 Notes NEOGARD luid-applied roof coating systems are designed to be long lasting, monolithic membranes which provide

More information

FIRESTOPPING & SMOKE SEALS

FIRESTOPPING & SMOKE SEALS SPECIFICATION SECTION 07 84 00 FIRESTOPPING & SMOKE SEALS 1 GENERAL 1.1 SECTION INCLUDES 1.1.1 Comply with Division 1, General Requirements and Documents referred to therein. 1.1.2 It is the intent of

More information

SWD URETHANE COATED FOAM ROOFING SYSTEM MASTER ROOF SPECIFICATION SECTION 075700

SWD URETHANE COATED FOAM ROOFING SYSTEM MASTER ROOF SPECIFICATION SECTION 075700 SWD URETHANE COATED FOAM ROOFING SYSTEM MASTER ROOF SPECIFICATION SECTION 075700 Part 1 GENERAL SUMMARY Section Includes: Coated foam roofing system and acceptable alternative applications as specified

More information

SECTION 07 61 13 STANDING SEAM METAL ROOFING

SECTION 07 61 13 STANDING SEAM METAL ROOFING SECTION 07 61 13 STANDING SEAM METAL ROOFING PART 1 GENERAL 1.01 SCOPE OF WORK A. The Work shall include all labor, materials, equipment and supervision required to complete the work of the above referenced

More information

East Central College

East Central College SECTION 096810 - TILE CARPETING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

Air-Conditioning, Heating, and Refrigeration Institute. Sheet Metal and Air-Conditioning Contractors National Association

Air-Conditioning, Heating, and Refrigeration Institute. Sheet Metal and Air-Conditioning Contractors National Association Air-Conditioning, Heating, and Refrigeration Institute Sheet Metal and Air-Conditioning Contractors National Association GUIDELINE B-1997 ACKNOWLEDGEMENT These guidelines for Roof Mounted Outdoor Air-

More information

ROOF INSPECTION & MAINTENANCE

ROOF INSPECTION & MAINTENANCE Physical Plant Administration Facilities Maintenance Department ROOF INSPECTION & MAINTENANCE All roofs require periodic inspection and maintenance in order to perform as designed and to provide a long

More information

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND.

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. 623.10.1 Description. This work shall consist of preparing the surface,

More information

Building Owners Guide to a Duro-Last System!

Building Owners Guide to a Duro-Last System! Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof

More information

SECTION EXTERIOR PAINTING

SECTION EXTERIOR PAINTING SECTION 09911 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

SC2000 CEMENT BONDING PROCEDURES

SC2000 CEMENT BONDING PROCEDURES Pg.1 SC2000 CEMENT BONDING PROCEDURES Widely recognized as the world s finest cold vulcanizing cement REMA SC2000 is the solution to your industrial bonding problems. By using REMA UTR20 hardener with

More information

Clear Fork Valley Local School District. Roofing Repairs Spring/Summer 2015

Clear Fork Valley Local School District. Roofing Repairs Spring/Summer 2015 Clear Fork Valley Local School District Roofing Repairs Spring/Summer 2015 Instructions to Bidders: Public Notice To Bidders (ORC 3313.46) Notice is hereby given that sealed bids will be received at the

More information

Epotec Primer Surfacer

Epotec Primer Surfacer Product Data 408 Epotec Primer Surfacer PRODUCTS Epotec Primer Surfacer Epotec Primer Hardener Thinners 408-Pack A 414-9105 Pack B R202-Normal conditions, R270-Hot conditions Product Description A polyamide

More information

A. The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date.

A. The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date. SECTION 09 68 00 CARPET PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

REV: Liquid Rubber Asbestos Cement Specification

REV: Liquid Rubber Asbestos Cement Specification REV:2 14.06.13 Liquid Rubber Preparation: Prior to application of the system the substrate must be suitably prepared: Option 1. A specialist surface preparation company can be employed to remove heavy

More information

T R A N S F E R A B L E F U L LY

T R A N S F E R A B L E F U L LY HSTOPS A WALL OF WATER 22 FT. HIG! F U L LY T R A N S F E R A B L E RESISTS10 PSI ! 1 F U L LY T R A N S F E R A B L E HSTOPS A WALL OF WATER 22 FT. HIG RESISTS10 PSI Guaranteed To Stop Water Even Under

More information

SECTION BROADLOOM CARPET PART 1 - GENERAL

SECTION BROADLOOM CARPET PART 1 - GENERAL SECTION 09680 BROADLOOM CARPET PART 1 - GENERAL 1.01 DESCRIPTION: A. Work of this section is subject to requirements of the Contract Documents including the General Conditions and Supplementary Conditions

More information

Wastewater Capital Projects Management Standard Construction Specification

Wastewater Capital Projects Management Standard Construction Specification CITY AND COUNTY OF DENVER ENGINEERING DIVISION Wastewater Capital Projects Management Standard Construction Specification 10.1 Precast Concrete Pipe 10.1.1 General This section covers material requirements,

More information

ASPHALT CEMENTS & COATINGS. Protective Asphalt Coatings Asphalt Primers Aluminum Coatings

ASPHALT CEMENTS & COATINGS. Protective Asphalt Coatings Asphalt Primers Aluminum Coatings ASPHALT CEMENTS & COATINGS Roof Mastics Protective Asphalt Coatings Asphalt Primers Aluminum Coatings ROOF MASTICS #211 Plastic Cement Mule-Hide #211 Plastic Cement is a general purpose formulation for

More information

Colors should be variations of tans or grays. Champagne is too light and other special colors should be approved on an individual basis.

Colors should be variations of tans or grays. Champagne is too light and other special colors should be approved on an individual basis. CARPET/VINYL MATERIAL & INSTALLATION GENERAL PARAMETERS Bids shall include all materials, labor, tools, equipment, debris/removal, transportation, services, permits or anything else required for completion

More information

SECTION 07 XX XX. Poly-Rubber Gel Injection Restorative Membrane System

SECTION 07 XX XX. Poly-Rubber Gel Injection Restorative Membrane System SECTION 07 XX XX Poly-Rubber Gel Injection Restorative Membrane System NOTES TO THE DESIGNER THIS SPECIFICATION SHALL BE USED FOR THE USE OF POLY-RUBBER GEL TO SEAL WATER LEAKS WITHIN STRUCTURES AND PERFORM

More information

SECTION 07400 STANDING SEAM METAL ROOF

SECTION 07400 STANDING SEAM METAL ROOF SECTION 07400 STANDING SEAM METAL ROOF PART 1 - GENERAL 1.01 SECTION INCLUDES A. Work described in this section includes pre-formed standing seam metal roofing system complete with clips, perimeter and

More information

HEB 38 BLANCO AND WEST AVENUE FLUID APPLIED EPDM RUBBER ROOF RECOVERY SYSTEM APPLICATION

HEB 38 BLANCO AND WEST AVENUE FLUID APPLIED EPDM RUBBER ROOF RECOVERY SYSTEM APPLICATION HEB 38 BLANCO AND WEST AVENUE FLUID APPLIED EPDM RUBBER ROOF RECOVERY SYSTEM APPLICATION David Marut TEST CASE REPORT July 1, 2014 Case Study Pro Guard EPDM Super Coat Liquid Rubber Membrane Roof System

More information

RECOATING AND RENEWING SPF ROOFING SYSTEMS

RECOATING AND RENEWING SPF ROOFING SYSTEMS RECOATING AND RENEWING SPF ROOFING SYSTEMS Procedures, Regional Differences and type of coating systems Bruce Schenke Premium Spray Products REASONS TO RECOAT/RENEW Add a new coating layer to renew the

More information

TITLE: MASONRY PARAPET WALLS AND FLAT ROOF REQUIREMENTS 11/1/09

TITLE: MASONRY PARAPET WALLS AND FLAT ROOF REQUIREMENTS 11/1/09 TITLE: MASONRY PARAPET WALLS AND FLAT ROOF REQUIREMENTS 11/1/09 PMT GUIDE # 10 Book of Order Section G-10.0102o: "The session is responsible for the mission and government of the particular church. It

More information

SECTION OUTLOOK INSULATED SAFETY GLASS AND METAL SKYLIGHT PANELS

SECTION OUTLOOK INSULATED SAFETY GLASS AND METAL SKYLIGHT PANELS SECTION OUTLOOK INSULATED SAFETY GLASS AND METAL SKYLIGHT PANELS PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Extent of the Glass and Metal Panels as indicated on the drawings. B. Principal Work in this

More information

SECTION XXXXXX TECHNICAL SPECIFICATIONS FOR INSTALLATION OF PROTECTIVE COATINGS FOR MANHOLES, WETWELLS, AND OTHER SANITARY SEWER STRUCTURES

SECTION XXXXXX TECHNICAL SPECIFICATIONS FOR INSTALLATION OF PROTECTIVE COATINGS FOR MANHOLES, WETWELLS, AND OTHER SANITARY SEWER STRUCTURES 1.00 PART 1 GENERAL 1.01 SCOPE A. It is the intent of this contract to install a 100% solids epoxy monolithic coating to the walls, benches and inverts of all manholes and the specified surfaces of other

More information

SC4000 CEMENT BONDING PROCEDURES

SC4000 CEMENT BONDING PROCEDURES Pg.1 SC4000 CEMENT BONDING PROCEDURES The REMA TIP TOP SC4000 Bonding System is free of chlorinated hydrocarbons (CFC), and consists of the following products: REMA TIP TOP Cement SC4000 + E40 Hardener

More information

SECTION THERMOPLASTIC MEMBRANE ROOFING (Changed by Addendum 2)

SECTION THERMOPLASTIC MEMBRANE ROOFING (Changed by Addendum 2) SECTION 07 5419 THERMOPLASTIC MEMBRANE ROOFING (Changed by Addendum 2) PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Rigid roof insulation. 2. (Changed by Addendum 1) Mechanically attached single

More information

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II SECTION 099113 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

NRDCA 400 GUIDELINE FOR FIELD APPLICATION of LIGHTWEIGHT INSULATING CONCRETE REROOFING/RECOVER SYSTEMS

NRDCA 400 GUIDELINE FOR FIELD APPLICATION of LIGHTWEIGHT INSULATING CONCRETE REROOFING/RECOVER SYSTEMS NRDCA 400 GUIDELINE FOR FIELD APPLICATION of LIGHTWEIGHT INSULATING CONCRETE REROOFING/RECOVER SYSTEMS The (NRDCA) has prepared this document to provide customers and installers information that the industry

More information

BITUMINOUS ROOF COATINGS, CEMENTS, PRIMERS AND ADHESIVES

BITUMINOUS ROOF COATINGS, CEMENTS, PRIMERS AND ADHESIVES BITUMINOUS ROOF COATINGS, CEMENTS, PRIMERS AND ADHESIVES ABOUT POLYGLASS U.S.A., INC. MODIFIED CEMENTS & ADHESIVES MASTICS ALUMINUM COATINGS EMULSIONS & PRIMERS PROTECTIVE COATINGS Polyglass manufactures

More information

Minor Cracks in Horizontal Surfaces

Minor Cracks in Horizontal Surfaces Cracks, chips and broken or flaking areas in concrete are not only unsightly, they can lead to further deterioration of the surface. The result is a costly replacement project as opposed to a simple repair.

More information

SECTION 07530 SINGLE PLY MEMBRANE ROOFING. 4. Minor repair to adjacent clay tile roofing and flashings.

SECTION 07530 SINGLE PLY MEMBRANE ROOFING. 4. Minor repair to adjacent clay tile roofing and flashings. SECTION 07530 PART 1 - GENERAL 1.01 DESCRIPTION A. This Section includes the flowing: 1. Removal of existing roofing membrane. Existing bur roof has one overlay and penetration mastic is asbestos containing.

More information

GUIDE SPECIFICATION COMBINATION SURFACE SYSTEM FOR NEW HOT MIX ASPHALT TENNIS COURTS I. PART 1 - GENERAL

GUIDE SPECIFICATION COMBINATION SURFACE SYSTEM FOR NEW HOT MIX ASPHALT TENNIS COURTS I. PART 1 - GENERAL COMBINATION SURFACE SYSTEM FOR NEW HOT MIX ASPHALT TENNIS COURTS I. PART 1 - GENERAL 1.1 SUMMARY A. This section is a part of the entire set of Contract Documents and shall be coordinated with the applicable

More information

STUCCO PATCHING AND REPAIR. B. Stucco Crack Repair

STUCCO PATCHING AND REPAIR. B. Stucco Crack Repair STUCCO PATCHING AND REPAIR Existing system: 2-coat stucco system with a polymer-based system finish coat. The base system is a product similar to a LaHabra Fastwall 100 with an El Rey Stucco PermaFlex

More information

Technical Data. wedi Liquid Vapor Barrier AEA-VBC-500

Technical Data. wedi Liquid Vapor Barrier AEA-VBC-500 Technical Data wedi Liquid Vapor Barrier AEA-VBC-500 Technical Data wedi Liquid Vapor Barrier AEA-VBC 500 Overview wedi Liquid Vapor Barrier AEA-VBC-500 is for wedi applications in residential and commercial

More information

INSTALLATION OF ECOWORX MODULAR CARPET

INSTALLATION OF ECOWORX MODULAR CARPET INSTALLATION OF ECOWORX MODULAR CARPET INSTALLATION GUIDELINES THE FOLLOWING INSTRUCTIONS SHOULD BE REVIEWED PRIOR TO INSTALLATION AS WELL AS MEETING THE REQUIREMENTS OF AS2455.1:2007 & AS2455.2:2007 (WHERE

More information

RAMAPO COLLEGE OF NEW JERSEY PHASE I HOUSING REHABILITATION C 2012

RAMAPO COLLEGE OF NEW JERSEY PHASE I HOUSING REHABILITATION C 2012 SECTION 04235 - BRICK PANEL SYSTEMS PART 1 - PRODUCT & DESCRIPTION Structural Support Panel System for Thin Brick shale be Tabs II, manufactured by Tabs Wall System, LLC, Grandville, MI 49468, (616) 261-5656.or

More information

Commercial Roof Management

Commercial Roof Management Disclaimer: This material is designed and intended for general informational purposes only, and is not intended, nor shall it be construed or relied upon, as specific legal advice. Roof damage is a leading

More information

Section Painting and Finishes (General)

Section Painting and Finishes (General) Section 099100 Painting and Finishes (General) PART 1 - GENERAL 1.01 Conditions A. The general provisions of the Contract, including General Conditions and Special Provisions apply to the work specified

More information

ACRYLIC COLOUR SURFACING AND LINE PAINTING

ACRYLIC COLOUR SURFACING AND LINE PAINTING CITY OF BRAMPTON LANDSCAPE SPECIFICATIONS SECTION 02765-1 PART 1 GENERAL 1.1 Related Work.1 All Division 1 Specification Sections.2 Section 02701 Aggregate Materials.3 Section 03300 Cast-In-Place Concrete

More information

CAST IRON DETECTABLE/TACTILE WARNING SURFACE INDICATOR PLATE

CAST IRON DETECTABLE/TACTILE WARNING SURFACE INDICATOR PLATE CAST IRON DETECTABLE/TACTILE WARNING SURFACE INDICATOR PLATE PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Special Conditions and Division

More information

Backstop NT. Backstop NT Application Instructions DS181. A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier

Backstop NT. Backstop NT Application Instructions DS181. A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier Backstop NT A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier Backstop NT Application Instructions CHECKLIST PRIOR TO THE INSTALLATION OF BACKSTOP NT TEXTURE,

More information

SWEPCO HEAVY DUTY POLYMASTER ROOF SYSTEM 201

SWEPCO HEAVY DUTY POLYMASTER ROOF SYSTEM 201 31 SC: 33 SWEPCO POLYMASTER ROOF SYSTEM 201 APPLICATION SPECIFICATIONS IMPORTANT -- These application specifications are provided for the use of all persons who are to apply SWEPCO Products. Please read

More information

Water Damage & Repair

Water Damage & Repair Water Damage & Repair Chinatown Preservation Talks 2015 James Engler, P.A Glenn Mason, AIA Mason Architects Program Outline Terminology & Waterproofing Basics Discussion of why this is important Below

More information

!!! !!!! !!! !!! !!! !!! !!!!!!!!! Table of Contents! Section 1: Most Common Types of Flat Roofing! Section 2: Better Understand Your Flat Roof!

!!! !!!! !!! !!! !!! !!! !!!!!!!!! Table of Contents! Section 1: Most Common Types of Flat Roofing! Section 2: Better Understand Your Flat Roof! Table of Contents Section 1: Most Common Types of Flat Roofing Section 2: Better Understand Your Flat Roof Section 3: Flat Roofing Cost in 2015: Four Factors that Dictate Section 4: Planning A Flat Roofing

More information

Premium quality tools are important; not only will high quality rollers, brushes, and products create a better result, they ll make your job easier.

Premium quality tools are important; not only will high quality rollers, brushes, and products create a better result, they ll make your job easier. How to Paint your Pool Introduction Painting is one of the best ways to protect and beautify your pool. In addition to adding a vibrant, fresh color, a new coat of paint can be a cost- efficient way to

More information

Standard Method for Sampling and Analysis of. of Chlorine Containing Bleaches. Soap Products

Standard Method for Sampling and Analysis of. of Chlorine Containing Bleaches. Soap Products GUIDE SPECIFICATION FOR GENERAL CLEANING AND REMOVAL OF MOLD AND MILDEW ON EXTERIOR INSULATED AND FINISH SYSTEMS AND STUCCO DIVISION 07240 and DIVISION 09240 8/05 PART I: GENERAL 1.01 DESCRIPTION AND SCOPE

More information

ALPHA 15-Year Permathane II FR w/granules

ALPHA 15-Year Permathane II FR w/granules ALPHA 15-Year Permathane II FR w/granules Section 07 57 13 Sprayed Polyurethane Foam Roofing Guide Specification PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Furnish all labor, materials, tools and

More information

SECTION EXTERIOR PAINTING

SECTION EXTERIOR PAINTING New Football Stadium 09.91.13-1 PART 1 GENERAL 1.01 SECTION INCLUDES A. Surface preparation. B. Field application of paints. SECTION 09.91.13 EXTERIOR PAINTING C. Scope: Finish exterior surfaces exposed

More information

Division 9. SignaFlor Pad and Pour Flooring System

Division 9. SignaFlor Pad and Pour Flooring System Division 9 SignaFlor Pad and Pour Flooring System SPECIFICATIONS Page 1. General... 2 1.1 Description 2 1.2 Quality Assurance 2 1.3 Submittals 2 1.4 Delivery and Storage 3 1.5 Warranty 3 1.6 Working Conditions

More information

TopCoat Metal Estimating Guide

TopCoat Metal Estimating Guide TopCoat Metal Estimating Guide Information Sheet Updated: 1/07 Quality You Can Trust Since 1886... From North America s Largest Roofing Manufacturer 1.0 PROJECT INFORMATION: 1.1 BUILDING NAME: 1.2 BUILDING

More information

A. Extent of steel joists is shown on drawings, including basic layout and type of joists required.

A. Extent of steel joists is shown on drawings, including basic layout and type of joists required. SECTION 05 21 00- STEEL JOIST FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-01 Specification

More information

Prior to beginning work, Contractor shall furnish to Owner the following:

Prior to beginning work, Contractor shall furnish to Owner the following: DIVISION 8 PAINTING SPECIFICATIONS 8.1 General 8.1.1 Scope Contractor shall provide all labor, material, and equipment and perform all operations necessary for all painting work specified including the

More information

UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Architectural. Roofing. Basis of Design

UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Architectural. Roofing. Basis of Design Basis of Design This section applies to roofing membranes, flashing and accessories. Design Criteria Adhere to the standards and details of the latest editions of the National Contractors Association (NRCA)

More information

Warranty Information TABLE OF CONTENTS PROCEDURES FOR WARRANTY 2

Warranty Information TABLE OF CONTENTS PROCEDURES FOR WARRANTY 2 Warranty Information TABLE OF CONTENTS PROCEDURES FOR WARRANTY 2 PROTECTING YOUR DURO-LAST ROOFING 3 Safety Measures 3 Inspection 3 Maintenance Program 4 Sealants 4 Drainage 4 Parapets Walls 4 Building

More information

B. Flexible sheet membranes for eave protection, underlayment, and valley protection. C. Associated metal flashings and accessories. 1.

B. Flexible sheet membranes for eave protection, underlayment, and valley protection. C. Associated metal flashings and accessories. 1. SECTION 07 3113 PART1 GENERAL 1.01 SECTION INCLUDES A. Asphalt shingle roofing. B. Flexible sheet membranes for eave protection, underlayment, and valley protection. C. Associated metal flashings and accessories.

More information

SPECIFICATIONS FOR BRIDGE CONSTRUCTION SECTION 16 BRIDGE DECK WATERPROOFING. 16.1 General...16-1. 16.2 Materials...16-1. 16.3 Equipment...

SPECIFICATIONS FOR BRIDGE CONSTRUCTION SECTION 16 BRIDGE DECK WATERPROOFING. 16.1 General...16-1. 16.2 Materials...16-1. 16.3 Equipment... SPECIFICATIONS FOR BRIDGE CONSTRUCTION SECTION 16 BRIDGE DECK WATERPROOFING TABLE OF CONTENTS 16.1 General...16-1 16.2 Materials...16-1 16.3 Equipment...16-1 16.4 Installation...16-2 16.4.1 Traffic Restrictions...16-2

More information

Installation manual for Authentic Stone Veneer

Installation manual for Authentic Stone Veneer Installation manual for Authentic Stone Veneer Please read carefully before installing: Install all Authentic Stone Veneer in accordance with ACI 530.1/ASCE 6/TMS 602 Specifications for Masonry Structures.

More information

1. Concrete. 2. Steel. 3. Galvanized metal. 4. Aluminum (not anodized or otherwise coated). 5. Wood. 6. Gypsum board.

1. Concrete. 2. Steel. 3. Galvanized metal. 4. Aluminum (not anodized or otherwise coated). 5. Wood. 6. Gypsum board. SECTION 099123 - INTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION 07 57 16 CEMENTITIOUS COATED FOAMED ROOFING

SECTION 07 57 16 CEMENTITIOUS COATED FOAMED ROOFING SECTION 07 57 16 CEMENTITIOUS COATED FOAMED ROOFING PART 1 GENERAL 1.01 SUBMITTALS A. Product Data: Submit manufacturer's literature and technical data (specifications, installation instructions and evidence

More information

Solicitation DTFACN-11-R-00079 Attachment #9

Solicitation DTFACN-11-R-00079 Attachment #9 These specs are only a general overview of the typical VOR Roof construction. These are for reference only. Each individual project will have its own specifications. 1 VOR Roof Projects IDIQ Solicitation

More information

Owner s Care & Maintenance Guide For Viridian Systems Roof Membranes

Owner s Care & Maintenance Guide For Viridian Systems Roof Membranes Owner s Guide For Viridian Systems Roof Membranes VIRIDIAN SYSTEMS ROOF MEMBRANE SYSTEM CARE & MAINTENANCE GUIDE TABLE OF CONTENTS A. INTRODUCTION... 2 B. PREVENTIVE MAINTENANCE... 2 C. LEAK INVESTIGATION...

More information

Maintenance & repair Solutions

Maintenance & repair Solutions Maintenance & repair Solutions low-slope ROOFING We ve got what you need in the sizes you need them and the options to match the results that building owners want Seal-fast Temporary roof sealer Now you

More information

A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents.

A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. POLYURETHANE COATING ON STEEL PIPE PART 1 -- GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. 1.2 REFERENCE SPECIFICATIONS,

More information

WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12

WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced

More information

INVITATION TO BID. Contractor Services Associated with:

INVITATION TO BID. Contractor Services Associated with: INVITATION TO BID Contractor Services Associated with: COMMUNITY CENTER AT 330 WINDSOR AVENUE ROOF REPAIR AND RESTORATION PROJECT 330 WINDSOR AVENUE WINDSOR, CT 06095 THIS IS A REQUEST FOR PROPOSALS AND

More information

Rooftop Matters. 2 0 1 2 Benchmark Report. Executive Summary

Rooftop Matters. 2 0 1 2 Benchmark Report. Executive Summary The 2012 Benchmark Report is our initial survey covering results from roof inspections and service calls over a six-month period. Our intention is to update these results annually in order to provide meaningful

More information

TUFFSEAL PMO Manufactured by Acrypave Manufacturing

TUFFSEAL PMO Manufactured by Acrypave Manufacturing Specifications for Construction TUFFSEAL PMO Manufactured by Acrypave Manufacturing DESCRIPTION 1.01 General. This work consists of constructing one or more courses of a polymer microoverlay (TUFFSEAL

More information

COATING & WRAPPING OF UNDERGROUND PIPING

COATING & WRAPPING OF UNDERGROUND PIPING CONSTRUCTION STANDARD SPECIFICATION DOCUMENT NO :SEC-PJ-000-SPC-PI-008 TOTAL PAGES : 8 Page 1 of 8 CONTENTS 1. SCOPE 2. DEFINITION 3. CODES AND STANDARDS 4. MATERIALS Page 2 of 8 1. SCOPE This specification

More information

Inspecting to a higher standard.

Inspecting to a higher standard. Inspecting to a higher standard. Rob Hopkin Silver Spring, MD 20902 Monday, June 2, 2014 ProTec Inspection Services Inc. 19736 Selby Ave Poolesville, MD 20837 301-972-8531 www.protec-inspections.com rob@protec-inspections.com

More information

Roofing /Flooring Apprenticeship

Roofing /Flooring Apprenticeship Davis School District Environmental Maintenance Services Roofing /Flooring Apprenticeship Requirements: Apprenticeship Program period begins when employee is hired into an approved apprentice position

More information

CHAPTER 6 ASPHALT ROLL ROOFING

CHAPTER 6 ASPHALT ROLL ROOFING CHAPTER 6 ASPHALT ROLL ROOFING Section I. DESCRIPTION AND GENERAL DISCUSSION 6.1.1 General 6.1.3 Mineral-Surfaced Asphalt roll roofing is roofing in sheet form Mineral-surfaced roll roofing is composed

More information

SECTION PAVEMENT MARKINGS

SECTION PAVEMENT MARKINGS SECTION 32 17 23 PAVEMENT MARKINGS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Traffic lines, legends and markings on asphalt and concrete surfaces. 2. Waterborne Traffic Paint. 3. Thermoplastic.

More information

Section 07540 BUILT UP ROOF (BUR) SPECIFICATION. 3 Coat Protocol. Material Only_10 yr Warranty

Section 07540 BUILT UP ROOF (BUR) SPECIFICATION. 3 Coat Protocol. Material Only_10 yr Warranty 1480 Englewood Ave. www.elastikote.com Akron, Ohio 44305 330-669-2552 800-992-1053 Section 07540 3 Coat Protocol Page 2 of 16 Page 3 of 16 Environmentally Responsible LIQUID MEMBRANE SYSTEM Roof restoration

More information

SWD URETHANE SPRAYFOAM INSULATION MASTER SPECIFICATION SECTION

SWD URETHANE SPRAYFOAM INSULATION MASTER SPECIFICATION SECTION PART 1 GENERAL SUMMARY SECTION INCLUDES: Spray polyurethane foam insulation and acceptable alternatives as described herein. DESCRIPTION A. Insulation materials shall be ICC approved ½ lb or 2 lb spray

More information

ITEM 599.06060008 THERMOPLASTIC MEMBRANE ROOFING

ITEM 599.06060008 THERMOPLASTIC MEMBRANE ROOFING DESCRIPTION Construct adhered membrane roofing system, roof insulation, and vapor retarder in accordance with these specifications. MATERIALS: General: Provide installed roofing membrane and base flashings

More information

Third Party Inspection Guidelines For Inspectors As Part of the dryvitcare EIFS Repair/Restoration

Third Party Inspection Guidelines For Inspectors As Part of the dryvitcare EIFS Repair/Restoration Third Party Inspection Guidelines For Inspectors As Part of the dryvitcare EIFS Repair/Restoration DS497 SECTION ONE A. Objective The objective of this guide is to provide owners and general contractors/construction

More information