HDPE PIPE. HDPE Pipe Toronto, Edmonton, Saskatoon, Vancouver, Montreal

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "HDPE PIPE. HDPE Pipe Toronto, Edmonton, Saskatoon, Vancouver, Montreal"

Transcription

1 HDPE PIPE HDPE Pipe Fabco Plastics is the leading Canadian supplier of industrial plastic pipe including HDPE. Our dedicated and knowledgeable sales staff can provide high quality technical information and accurate project quotations on a timely basis. Fabco provides HDPE pipe to, custom fabricated butt fusion fittings, butt fusion equipment and easy to use electrofusion fittings to. The standard length of HDPE pipe is 0 feet, in sizes above in diameter with longer lengths available on request. Coiled pipe is available in diameters up to and is available in 0 and 00 foot lengths. Larger pipe sizes and coil lengths are available on special request. Features: HDPE Pipe is Leak Proof HDPE pipe can be joined by thermal fusion to form a joint that is as strong as the pipe itself and is leak free. Thermal fusion eliminates potential leak points every -0 feet commonly found with Concrete, PVC and Ductile Iron pipe. Leak proof joints also eliminate infiltration and exfiltration problems experienced with other pipe joining methods. Since fused joints are self-restraining, costly thrust restraints or thrust blocks are not required. HDPE Pipe is Corrosion and Chemical Resistant HDPE pipe will not corrode, tuberculate or support biological growth. It is the material of choice in harsh chemical environments. HDPE pipe has a smooth ID and maintains its flow capability over time - Hazen Williams C Factor remains 0, even after years of use. HDPE Pipe is Flexible and Fatigue Resistant HDPE pipe can be bent to a radius times the nominal pipe diameter. This can eliminate many fittings required for directional changes compared to piping systems made from other materials. In addition, the flexibility of HDPE pipe makes it well suited for dynamic soils and areas prone to earthquake. HDPE pipe for pressure applications can accept repetitive pressure surges that exceed the static pressure rating of the pipe. HDPE Pipe is Lightweight and Impact Resistant HDPE pipe is much easier to handle and install than heavier, rigid metallic or concrete pipe, allowing for cost advantages in the construction process. It is structurally better able to withstand an impact than other pipe materials, especially in cold weather installations when other pipes like PVC are prone to cracks and breaks. HDPE Pipe is Easy to Install Flexibility and leak free joints allow for unique and cost effective methods of installation of HDPE pipe that the rigid Concrete, PVC and Ductile Iron pipes can t use. These alternate installation methods (Horizontal Directional Drilling, Pipe Bursting, Sliplining, Plow and Plant, Submerged or Floating Pipe) can save considerable time and money in most applications. HDPE Pipe is Cost Effective and Permanent HDPE pipe is cost effective and has long term cost advantages due to its physical properties, leak free joints and reduced maintenance costs. The Plastics Pipe Institute estimates the service life for HDPE pipe to conservatively be 0-0 years. - Toronto, Edmonton, Saskatoon, Vancouver, Montreal

2 HDPE PIPE Nominal Pipe Size Nominal Pipe Size Outside Outside DR. (0 PSI) DR ( PSI) DR (0 PSI) DR (0 PSI) DR (0 PSI) DR (00 PSI) DR. ( PSI) (M) (M) (M) (M) (M) (M) Notes Pipe dimensions are in accordance with ASTM F and AWWA C0. Pressure ratings are for water at. deg F. Some of the pipe sizes and/or DRs above are only available upon request. Other diameters and DRs not listed may be available upon special request. All dimensions are in inches unless otherwise specified. s are calculated by the methodology established in PPI s TR. -

3 Butt Elbows SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B C WALL D OD E WEIGHT IPS IPS IPS IPS IPS IPS IPS Molded of PE 0//0 Black A B C WALL D OD E WEIGHT / IPS IPS / IPS / IPS IPS IPS IPS IPS IPS IPS IPS Butt 0 Elbows SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B C WALL D OD E WEIGHT / IPS IPS / IPS / IPS IPS IPS IPS IPS IPS IPS IPS SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B C WALL D OD E WEIGHT IPS IPS IPS IPS IPS IPS IPS Molded of PE 0//0 Black -0 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

4 Butt End Caps SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) C D WEIGHT A B WALL OD / IPS IPS / IPS / IPS IPS IPS IPS IPS IPS IPS IPS..... SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B C WALL D OD WEIGHT IPS IPS IPS IPS IPS IPS IPS Butt Flange Adapters Molded of PE 0//0 Black SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B E WEIGHT C D OD WALL / IPS IPS / IPS / IPS IPS IPS IPS IPS IPS IPS IPS SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A OD B C D E WALL WEIGHT IPS IPS IPS IPS IPS IPS IPS Molded of PE 0//0 Black -

5 Ductile Iron Backing Rings Conventional Cross Section in Ductile Iron PIPE OD FLANGE THICKNESS ID BOLT # BOLT HOLE BOLT CIRCLE " /" /" " " " " " " " Butt Reducers (Concentric Elongated) SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) D E F G A B C WEIGHT WALL OD OD WALL x IPS x IPS x IPS x IPS x IPS x IPS x IPS x IPS x IPS SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B C D WALL E OD F OD G WALL WEIGHT x IPS x IPS x IPS x IPS x IPS x IPS x IPS x IPS x IPS x IPS Molded of PE 0//0 Black Description: A conventional cross section (reduced section modulus) in ductile iron. Utilization: A back-up ring for IPS or APR connections. Buttweld or integrally flared stub-ends. Materials: Cast in ductile iron A. Tensile strength 0,000 psi, yield,000 psi, elongation %. Dimensions: Vital dimensions AWWA C0, Mates with ANSI B., B.; AWWA C0. Finish: Red oxide primer, hot dipped galvanized - Toronto, Edmonton, Saskatoon, Vancouver, Montreal

6 Butt Tees SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B C D E WEIGHT / IPS IPS / IPS / IPS IPS IPS IPS IPS IPS IPS IPS SDR (STANDARD DIMENSION RATIO) 0 PSI (WORKING PRESSURE AT. F) A B C D E WEIGHT IPS IPS IPS IPS IPS IPS IPS Molded of PE 0//0 Black Electro-Fusion Coupler SDR -. PE 0/ BLACK. MOP WATER 0PSI / GAS 0PSI INJECTION MOLDED. PIPE SIZE DA (OD) OD L D D T /".".... /".0".... ".".0... /"."..0.. /"." "."... ".".... "."...0. ".".... ".".0... "." "." PP Gray Steel Backing Ring ANSI (Fiber Reinforced) STEEL INSERT, INJECTION MOLDED, HIGH STIFFNESS, DIMENSIONAL AND HEAT STABILITY PIPE D D D B K OD (MM-IN) /" 0 - /" - MOP 0 psi /" - /" - MOP 0 psi " - " - MOP 0 psi /" 0 - /" - MOP 0 psi /" 0 - /" - MOP 0 psi " - " - MOP 0 psi /" - /"- MOP 0 psi " 0 - " - MOP 0 psi " / - " - MOP 0 psi " 0 - " - MOP 0 psi " 00/ - " - MOP 0 psi " 0 - " - MOP 0 psi " - " - MOP 0 psi

Introduction CHAPTER 1

Introduction CHAPTER 1 Introduction 5 CHAPTER 1 Introduction Since its discovery in 1933, PE has grown to become one of the world s most widely used and recognized thermoplastic materials.(1) The versatility of this unique plastic

More information

HIGH DENSITY POLYETHYLENE

HIGH DENSITY POLYETHYLENE HIGH DENSITY POLYETHYLENE Sclairpipe Versatile high density polyethylene pipe Sclairpipe Flexible lightweight pipe for your most demanding applications Sclairpipe high density polyethylene (HDPE) pipe

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015

DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015 DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT Jim Riley, Texas A&M University February 10, 2015 Piping at Texas A&M 2 History of Distribution Piping at Texas A&M Concrete reinforced

More information

General Guidelines for Repairing Buried PE Potable Water Pressure Pipes

General Guidelines for Repairing Buried PE Potable Water Pressure Pipes 515 General Guidelines for Repairing Buried PE Potable Water Pressure Pipes Introduction Traditional piping systems have gasket-sealed bell and spigot joints every 20 feet, which can be a potential maintenance

More information

MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water

MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org HDPE

More information

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts

More information

Technical Note PP 811-TN PE Flange Connections

Technical Note PP 811-TN PE Flange Connections Technical Note PP 811-TN PE Flange Connections Flange Connection Flanged joints are made using a DriscoPlex Flange Adapter that is fused to the pipe then joined to a mating flange adapter or a mating appurtenance

More information

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe Black and Galvanized Steel Pipe PIPE Wheatland Steel Pipe is made by specialists who understand that it s the small details that make the difference between average products and superior products. At the

More information

1.3.3 When pipe is required for close coiling, this should b specified on the order.

1.3.3 When pipe is required for close coiling, this should b specified on the order. SA 36* SA 53* Covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded contrsuction of bidges and buildings, and for general structural purposes. When the

More information

HDPE. High-Density Polyethylene Pipe Systems. Meeting the challenges of the 21 st century

HDPE. High-Density Polyethylene Pipe Systems. Meeting the challenges of the 21 st century HDPE High-Density Polyethylene Pipe Systems Meeting the challenges of the 21 st century 1 Smooth-wall High-Density Polyethylene pipe systems Meeting the challenges of the 21 st century Piping made from

More information

SECTION 02401 - SANITARY SEWER PIPE

SECTION 02401 - SANITARY SEWER PIPE PART 1 - GENERAL 1.1 DESCRIPTION A. The WORK under this Section includes providing all labor, materials, tools and equipment necessary for furnishing and installing sanitary sewer pipe, in accordance with

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

SECTION 33 11 00.13 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS

SECTION 33 11 00.13 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS SECTION 33 11 00.13 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS PART 1: GENERAL 1.01 SECTION INCLUDES Furnishing and installing up to 16-inch high density polyethylene (HDPE) pipe and fittings for

More information

Polyethylene Pressure Pipe

Polyethylene Pressure Pipe -25 Pipe Systems dvantages Pipe made from polyethylene is a cost-effective solution to a broad range of piping problems in municipal, industrial, marine, mining, and agricultural applications. It has proven

More information

Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe

Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe 1. GENERAL The following supplemental sewer main specifications are intended to address the installation of high-density polyethylene

More information

JMM HIGH DENSITY POLYETHYLENE (HDPE) PE4710 PRODUCT SPECIFICATION

JMM HIGH DENSITY POLYETHYLENE (HDPE) PE4710 PRODUCT SPECIFICATION Description: JMM HIGH DENSITY POLYETHYLENE (HDPE) PE4710 PRUCT SPECIFICATION JMM manufactures High Density Polyethylene (HDPE) water pressure pipes for municipal and industrial transmission systems. Our

More information

4. Buoyancy of Pipelines.

4. Buoyancy of Pipelines. 4. Buoyancy of Pipelines. a. General. 1) The possibility of pipe flotation exists when the pipeline is constructed in areas which will be inundated, such as stream crossings, flood plains and high ground

More information

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING 60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed

More information

Fusible PVC Pipe Systems Fusible C-900 Fusible C-905 FPVC

Fusible PVC Pipe Systems Fusible C-900 Fusible C-905 FPVC Fusible PVC Pipe Systems Fusible C-900 Fusible C-905 FPVC www.undergroundsolutions.com Installations: Trenchless Horizontal Directional Drilling (HDD) Sliplining Pipe Bursting Jack-and-Bore Carrier Pipe

More information

Why Use PolyPipe? Quality Assurance in Product Design and Materials. Major Industries Served

Why Use PolyPipe? Quality Assurance in Product Design and Materials. Major Industries Served Why Use PolyPipe? PolyPipe offers a complete range of extra high molecular weight (EHMW), high-density polyethylene (HDPE) pipe. We are known for state-of-the-art facilities, and a team of people dedicated

More information

High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines

High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines Jeff Schell General Manager United Pipeline Middle East, Inc. Introduction HDPE Liners A cost effective and environmentally beneficial

More information

SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION

SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION PART 1 GENERAL.01 SECTION INCLUDES Furnishing and installing 4 inch through 16 inch high density

More information

APPENDIX A FORMULAE AND SAMPLE CALCULATIONS

APPENDIX A FORMULAE AND SAMPLE CALCULATIONS APPENDIX A FORMULAE AND SAMPLE CALCULATIONS Pipe Installation (Fused) The fused polyethylene (PE) pipe can be pulled by a cable attached to a pulling head fastened to the pipe. This prevents damage to

More information

SECTION 8 AMERICAN. Flanged Pipe

SECTION 8 AMERICAN. Flanged Pipe SECTION 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either

More information

725-R-599 PIPE LINING. (Revised 05-01-12) SECTION 725, BEGIN LINE 1, INSERT AS FOLLOWS: SECTION 725 SLIP LINING OF EXISTING PIPE

725-R-599 PIPE LINING. (Revised 05-01-12) SECTION 725, BEGIN LINE 1, INSERT AS FOLLOWS: SECTION 725 SLIP LINING OF EXISTING PIPE PIPE LINING (Revised 05-01-12) The Standard Specifications are revised as follows: SECTION 725, DELETE LINES 1 THRU 317. SECTION 725, BEGIN LINE 1, INSERT AS FOLLOWS: SECTION 725 SLIP LINING OF EXISTING

More information

316L Pipe Sizing Calculations and Tables

316L Pipe Sizing Calculations and Tables DISCUSSION For piping systems constructed with a minimum ¾ to a maximum 2-1/2 316L seamless pipe (A312). The physical dimensions and mechanical properties are listed below: Material: 316L : ¾ 2-1/2 Schedule

More information

Big Pipe Big Benefits

Big Pipe Big Benefits Large Diameter PVC Water & Sewer Pipe 30 & 36 Big Pipe Big Benefits Large Diameter PVC Pipe Systems Offer: Corrosion and Abrasion Resistance for Long Service Life Replace High Resistance to Attack from

More information

Mechanical Couplings for Joining Polyethylene Pipe TN-45/2012

Mechanical Couplings for Joining Polyethylene Pipe TN-45/2012 Mechanical Couplings for Joining Polyethylene Pipe TN-45/2012 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org Foreword This report was developed and published

More information

MS-6/2009 Model Specification and Checklist for Polyethylene (PE) Pipe for the Sliplining of Sewers

MS-6/2009 Model Specification and Checklist for Polyethylene (PE) Pipe for the Sliplining of Sewers MS-6/2009 Model Specification and Checklist for Polyethylene (PE) Pipe for the Sliplining of Sewers The Plastics Pipe Institute March 2009 1 DISCLAIMER This guideline has been prepared by the Plastics

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

APPLICATIONS. Blue Brute Tough!

APPLICATIONS. Blue Brute Tough! DESCRIPTION, APPLICATIONS, ADVANTAGES Lifeline of the City Our well being depends on the health of our municipal infrastructure. We depend on reliable supplies of potable water and the effective removal

More information

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25 TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140

More information

2013 Edition. Flanged fittings 30"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61

2013 Edition. Flanged fittings 30-64 NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61 30"-64" Ductile Iron industrial Applications, water & Wastewater 2 Table of Contents Flanged Fittings for Water 3 Flange Details 5 Flanged Fittings 6 90º and 45º Bend 6 22-1/2º and 11-1/4º Bends 7 Tees

More information

PPI TN-27/2009. Frequently Asked Questions. HDPE Pipe for Water Distribution and Transmission Applications

PPI TN-27/2009. Frequently Asked Questions. HDPE Pipe for Water Distribution and Transmission Applications PPI TN-27/2009 Frequently Asked Questions HDPE Pipe for Water Distribution and Transmission Applications PPI TN-27: Frequently Asked Questions HDPE Pipe for Water Distribution and Transmission Applications

More information

PipING system up to Ø2200 mm

PipING system up to Ø2200 mm LARGE DIameter PE Pressure PipING system up to Ø2200 mm en Worldwide competence in plastics AGRU Kunststofftechnik GmbH is a family-owned enterprise headquartered in Austria with worldwide activities in

More information

Fire Protection Piping Solution Revised 2002

Fire Protection Piping Solution Revised 2002 Connecting the Resources You Need Fire Protection Piping Solution Revised 2002 Coming through. Fitting Quick Finder This adapter is used extensively to connect HDPE with ductile iron pipe. MJ Adapters

More information

PEX Pipes for Plumbing Applications

PEX Pipes for Plumbing Applications PEX Pipes for Plumbing Applications Introduction How PEX pipes are made Reasons for using PEX systems Industry standards and tests PEX joining systems Code acceptance Design considerations Installation

More information

Stainless Steel Pipe and Flanges

Stainless Steel Pipe and Flanges Stainless Steel Pipe and Flanges Stainless Steel 4 Pipe and Flanges Photography courtesy of Outokumpu, Arcelor, Atlas Steels and New Zealand Tube Mills. Stainless steel pipe and fittings A stainless steel

More information

SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE

SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE PART 1: GENERAL 1.01 SECTION INCLUDES PVC pressure pipe and fabricated fittings in nominal sizes 4-inches through 12-inches with cast iron pipe equivalent

More information

Product Data and Specifications. Spiral Duct Systems For all HVAC Requirements

Product Data and Specifications. Spiral Duct Systems For all HVAC Requirements Product Data and Specifications Spiral Duct Systems For all HVAC Requirements STANDARDS FINISHES/ OPTIONS/ SIZES COST RATIO RELATED CONFORMANCE COLORS ACCESSORIES INDEX DATA - Galvanized steel. - Satin

More information

Series 4000 Fiberglass Pipe and Fittings

Series 4000 Fiberglass Pipe and Fittings Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service Uses and applications Listings Performance Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing

More information

INDEX. Sec. No. Items Page Nos.

INDEX. Sec. No. Items Page Nos. INDEX Sec. No. Items Page Nos. 1. Types of Pipe............... MSSP- 2 2. Concrete Pipe............... MSSP- 2 thru MSSP-3 3. ABS and PVC Truss Pipe............... MSSP- 3 4. ABS and PVC Solid Wall Pipe...............

More information

SECTION 603 SANITARY SEWER FORCE MAINS

SECTION 603 SANITARY SEWER FORCE MAINS SECTION 603 SANITARY SEWER FORCE MAINS 1. GENERAL Pipelines for sanitary sewer force main systems shall conform to the following specifications and shall be installed at the locations indicated on the

More information

Polyethylene Piping for Underground Fire Main Systems

Polyethylene Piping for Underground Fire Main Systems Polyethylene Piping for Underground Fire Main Systems Factory Mutual Approvals DRISCOPLEX Polyethylene Piping for Underground Fire Main Systems August 2007 Factory Mutual Approvals DRISCOPLEX Polyethylene

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

WELDED AND SEAMLESS PIPE

WELDED AND SEAMLESS PIPE WELDED AND SEAMLESS PIPE MATERIAL SPECIFICATIONS Antec offers a stock range of seamless and longitudinally welded pipe to American standards, with other specifications (eg: spirally welded) available to

More information

SECTION POLYVINYL CHLORIDE PIPE, AWWA C900/C905

SECTION POLYVINYL CHLORIDE PIPE, AWWA C900/C905 SECTION 02670 POLYVINYL CHLORIDE PIPE, AWWA C900/C905 PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Furnish and install AWWA C900 PVC, DR 18 for 4 through 12 size and AWWA C905 PVC, DR 25 for 14

More information

SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors.

SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors. SUBDRAINS AND FOOTING DRAIN COLLECTORS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Subdrains B. Subdrain Cleanouts and Outlets C. Footing Drain Collectors D. Storm Sewer Service and Connections 1.02 DESCRIPTION

More information

3. ASTM D Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds.

3. ASTM D Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. SECTION 02623 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required, and install polyvinyl chloride (PVC) waterline, fittings, service connections and appurtenances

More information

Appendix A: Acceptable pipe and fitting materials

Appendix A: Acceptable pipe and fitting materials Watercare Services Limited Water and Code of Practice Content from the NZS 4404:2010 Land development and subdivision infrastructure has been reproduced for use in the Infrastructure Design s Manual for

More information

The surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.

The surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes. QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered

More information

Technical Note 814-TN Engineering Considerations for Temperature Change

Technical Note 814-TN Engineering Considerations for Temperature Change Technical Note 814-TN Engineering Considerations for Temperature Change www.performancepipe.com Like most materials, polyethylene is affected by temperature change. However, polyethylene s response to

More information

VINYL PROCESS PIPING SYSTEMS. Complete systems of pipe, valves and fittings designed, manufactured and backed by one company.

VINYL PROCESS PIPING SYSTEMS. Complete systems of pipe, valves and fittings designed, manufactured and backed by one company. I N D U S T R I A L S Y S T E M S VINYL PROCESS PIPING SYSTEMS Complete systems of pipe, valves and fittings designed, manufactured and backed by one company. IPEX. Your Industrial Specialist. We build

More information

Gravenhurst Plastics Limited INNERDUCT ELECTRICAL - DATA - COMMUNICATION

Gravenhurst Plastics Limited INNERDUCT ELECTRICAL - DATA - COMMUNICATION INNERDUCT ELECTRICAL - DATA - COMMUNICATION Plenum Conduit - FT6 Gravenhurst Plenum Conduit is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior

More information

SECTION VALVE BOXES AND METER VAULTS

SECTION VALVE BOXES AND METER VAULTS SECTION 03 48 20 VALVE BOXES AND METER VAULTS PART 1: GENERAL 1.01 SECTION INCLUDES A. Valve boxes for water and cleanout boxes for wastewater service. B. Meter boxes for water service. C. Meter vaults

More information

JCM TAPPING SLEEVES MORE SELECTION, BENEFITS, OPTIONS

JCM TAPPING SLEEVES MORE SELECTION, BENEFITS, OPTIONS JCM TAPPING SLEEVES MORE SELECTION, BENEFITS, OPTIONS Specifying the right tapping sleeve for the condition of the job is the best way to assure a successful tap. JCM s are readily available in a wide

More information

SEAMLESS WELDED FITTINGS

SEAMLESS WELDED FITTINGS SEAMLESS WELDED FITTINGS WALL THICKNESS NPS Pipe 2 A B K D V E F G O.D. Light SCH SCH STD SCH SCH X-SIG SCH SCH SCH SCH SCH XX NPS Wall 20 0 40 60 80 00 20 40 60 Stg ASA MSS /2.840.08 --- ---.09.09 ---.4.4

More information

SECTION 710 GUARDRAIL MATERIALS

SECTION 710 GUARDRAIL MATERIALS 710.08 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SECTION 710 GUARDRAIL MATERIALS 710.01 General. Metal beam

More information

SECTION 02824 EXPANDED METAL MESH FENCE

SECTION 02824 EXPANDED METAL MESH FENCE SECTION 02824 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for expanded metal mesh fence on the right-of-way. 1.02 REFERENCE STANDARDS A. ASTM International (ASTM): 1.03 SUBMITTALS

More information

Subpart C Pipe Design

Subpart C Pipe Design 192.101 Scope Subpart C Pipe Design This subpart prescribes the minimum requirements for the design of pipe. 192.103 General Pipe must be designed with sufficient wall thickness, or must be installed with

More information

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved.

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved. PROPER HANGING OF FIRE SPRINKLER SYSTEMS 2010 IFSA. All rights reserved. 1 HANGING PER NFPA 13 2 Historical developments and basic concepts Hangers Hanger installation Special listed pipe Hangers in earthquake

More information

Green Thread Product Data

Green Thread Product Data Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using

More information

PVC PIPE PERFORMANCE FACTORS

PVC PIPE PERFORMANCE FACTORS PVC PIPE PERFORMANCE FACTORS PVC pipe, like all flexible pipe products, is very dependent on the surrounding soil for its structural capacity, in addition, the pipe material must have sufficient inherent

More information

Prefabricated FRP Lift Station Sample Specifications Section 1 General

Prefabricated FRP Lift Station Sample Specifications Section 1 General Section 1 General 1. Description 1.1 Scope of Work: Contractor shall furnish all labor, materials, equipment and performance of all work necessary or incidental to furnish and install a simplex/duplex

More information

SECTION 15105 DUCTILE IRON PIPE AND FITTINGS

SECTION 15105 DUCTILE IRON PIPE AND FITTINGS SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections

More information

Copper and Copper Alloy Tube, Pipe and Fittings

Copper and Copper Alloy Tube, Pipe and Fittings Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

Friction Loss Charts 2008

Friction Loss Charts 2008 Irrigation Association Friction Loss Charts 2008 Tables are based upon the following Hazen-Williams Equation: H f = 0.2083 100 C 1.852 Q1.852 D 4.866 The result is multiplied by 0.433 to give pounds per

More information

OUTLINE. How PEX pipes are made Capabilities of PEX pipes, standards, testing PEX pipes for Plumbing and other applications

OUTLINE. How PEX pipes are made Capabilities of PEX pipes, standards, testing PEX pipes for Plumbing and other applications PEX Pipes for Plumbing Presented at the 40 th ASPE Convention, Oct 2004 Lance MacNevin, Chair, PPI High Temperature Plastics Division Camille George Rubeiz, P.E., Director of Engineering, PPI OUTLINE How

More information

CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS. 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories

CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS. 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories 8.1 Piping Systems and Components Piping systems are classified

More information

Pipe Pile. (800) 848-6249

Pipe Pile. (800) 848-6249 Pipe Pile Similar to H-Piles, Pipe Piles are also designed to transfer structural loads through the foundation to soils below. Where H-Piles are typically classified as point bearing, Pipe Piles are most

More information

Stainless Steel Tube and Fittings

Stainless Steel Tube and Fittings Stainless Steel Tube and Fittings Stainless Steel 5 Tube and Fittings Photography courtesy of Outokumpu, Arcelor and New Zealand Tube Mills. Stainless steel tube and fittings As-welded (AW) tube Stainless

More information

PVC and HDPE / Pipe Pressure Class ( Example)

PVC and HDPE / Pipe Pressure Class ( Example) DESIGN AND SELECTION OF PLASTIC PRESSURE PIPE TECHNICAL BULLETIN 1. INTRODUCTION Potable water pressure pipes are made from many different materials. The most commonly used pipe materials for municipal

More information

Quality is Central. Gas Water & Waste Water Energy Industrial. Leaders in Transition

Quality is Central. Gas Water & Waste Water Energy Industrial. Leaders in Transition Quality is Central. Quality at Georg Fischer Central Plastics is backed by the most extensive research and development, quality assurance and in-house testing programs in the industry. Leaders in Transition

More information

A Discussion of Steel Pipe versus Ductile Iron Pipe

A Discussion of Steel Pipe versus Ductile Iron Pipe A Discussion of Steel Pipe versus Ductile Iron Pipe The comparison of spiral-welded steel pipe to ductile iron pipe below highlights how steel is not only equal to ductile iron as a material for use in

More information

WATER & SEWER CORROSIVE RESISTANT PRODUCTS

WATER & SEWER CORROSIVE RESISTANT PRODUCTS WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING

More information

WATER DISTRIBUTION PRODUCTS PVC WATER FITTINGS

WATER DISTRIBUTION PRODUCTS PVC WATER FITTINGS WATER DISTRIBUTION PRODUCTS PVC WATER FITTINGS CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

SYSTEMS ENGINEERING DATA FOR THERMOPLASTIC PIPING

SYSTEMS ENGINEERING DATA FOR THERMOPLASTIC PIPING SYSTEMS ENGINEERING DATA INTRODUCTION In the engineering of thermoplastic piping systems, it is necessary to have not only a working knowledge of piping design but also an awareness of a number of the

More information

Section 2100-Trenching and Tunneling

Section 2100-Trenching and Tunneling SECTION 5200 - STORM SEWER PART 1 - GENERAL 1.01 SCOPE: This Section covers installation of storm sewer mains and culverts. Topics include permits and fees, trench widths, pipe laying, bedding, initial

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

San Antonio Water System Standard Specifications for Construction ITEM NO. 1100 SLIP-LINING SANITARY SEWERS

San Antonio Water System Standard Specifications for Construction ITEM NO. 1100 SLIP-LINING SANITARY SEWERS ITEM NO. 1100 SLIP-LINING SANITARY SEWERS 1100.1 DESCRIPTION: This item shall consist of slip-lining sanitary sewer pipe, which is accomplished by pulling or pushing liner pipe into existing sewers by

More information

Link-Seal Sizing Using standard pipe size charts with suggested Link-Seal Modular Seals Models in combination with Century-Line Sleeves, WS Steel

Link-Seal Sizing Using standard pipe size charts with suggested Link-Seal Modular Seals Models in combination with Century-Line Sleeves, WS Steel Link-Seal Sizing Using standard pipe size charts with suggested Link-Seal Modular Seals Models in combination with Century-Line Sleeves, WS Steel Sleeves or within specified sized cast or core bit drilled

More information

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard

More information

Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques

Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques Schedule 40 Rigid PVC Piping Systems SCHEDULE 40 - DIMENSIONS Harvel

More information

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART OUR KNOWLEDGE SETS US APART Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts & Bolts TABLE OF CONTENTS Flange Details - Class 125............................................2 Designation

More information

Standard Specifications, Standard Test Methods and Codes for PE (Polyethylene) Piping Systems

Standard Specifications, Standard Test Methods and Codes for PE (Polyethylene) Piping Systems 125 Standard Specifications, Standard Test Methods and Codes for PE (Polyethylene) Piping Systems Introduction The specification, design and use of PE piping systems is addressed by a number of standard

More information

Engineering Specifications

Engineering Specifications PUREFLOW PEX PRODUCTS PART 1 GENERAL 1.1 SUMMARY 1.1.1 This specification covers Branch & Main, Parallel Water Distribution Systems (MANABLOC), Cross-linked Polyethylene tubing and fittings using PEX Press

More information

PE100 pressure fittings

PE100 pressure fittings Table of contents Table of contents...1 pressure fittings Short fittings for butt-welding Stub flanges...2 Tees...8 Bends...15 Reducers...17 End caps...26 Unions...28 Adaptors...34 Long fittings Stub flanges...36

More information

2014 Edition 3"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61

2014 Edition 3-64 NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61 3"-64" Ductile Iron industrial Applications, water & Wastewater 866.DI.IE 2 Table of Contents Flanged ipe for Water and Other Liquids 3 Ductile Iron Flanged ipe With Threaded Flanges-Flanged Details 5

More information

SECTION THERMOPLASTIC RAILINGS. A. Thermoplastic handrails and railings, including connectors, fasteners, and system required accessories.

SECTION THERMOPLASTIC RAILINGS. A. Thermoplastic handrails and railings, including connectors, fasteners, and system required accessories. SECTION 05520 THERMOPLASTIC RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Thermoplastic handrails and railings, including connectors, fasteners, and system required accessories. 1.2 RELATED SECTIONS

More information

SECTION 6 SANITARY SEWER MAIN 6.01 SCOPE

SECTION 6 SANITARY SEWER MAIN 6.01 SCOPE 6.01 SCOPE The work covered by this section of the specifications consists of the furnishing of all plant, labor, materials, equipment and supervision and performing all operations involved in the construction

More information

MANUFACTURER'S CERTIFICATION SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE

MANUFACTURER'S CERTIFICATION SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE PVC materials used in Schedule 40 and Schedule 80 pipe manufactured by Texas United Pipe, Inc., comply with the ASTM Standard D-1784 and are a Type I Grade

More information

Anatomy of a Grooved Pipe Joint ANATOMY OF A GROOVED PIPE JOINT

Anatomy of a Grooved Pipe Joint ANATOMY OF A GROOVED PIPE JOINT The grooved piping system has been around for over 85 years, providing fast, easy, reliable piping assembly. While technology has changed application parameters cut grooving to roll grooving, standard

More information

MUELLER CORPORATION VALVES

MUELLER CORPORATION VALVES MUELLER CORPORATION VALVES 5. Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping machine used to make pressure taps

More information

***Please note all bolts are required to be stamped with the manufacturer s symbol on the head of the bolt along with material identification.

***Please note all bolts are required to be stamped with the manufacturer s symbol on the head of the bolt along with material identification. January 2012 ***Please note all bolts are required to be stamped with the manufacturer s symbol on the head of the bolt along with material identification. *** Bolts and Nuts for Flanged Connections Bolts

More information

S W E RV E RAC K. Simple Security. Simple Stability.

S W E RV E RAC K. Simple Security. Simple Stability. S W E RV E RAC K Simple Security. Simple Stability. The Swerve Rack is a proven design that provides high security and easy bike parking. The Swerve Rack uses thick pipe construction and the full radius

More information

SECTION 02563 SANITARY SEWER FORCE MAINS

SECTION 02563 SANITARY SEWER FORCE MAINS SECTION 02563 SANITARY SEWER FORCE MAINS 1.0 GENERAL A. Description Sanitary sewer force main installation shall include, but not necessarily be limited to, furnishing and installing pressure rated pipe,

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

ASTM D 1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

ASTM D 1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings ASTM D 1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings This test method establishes the short-time hydraulic failure pressure of pipe and

More information

COUPLE WITH CONFIDENCE

COUPLE WITH CONFIDENCE PIPE COUPLINGS (PTY) LTD sales@klamfle.com www.klamfle.com PRODUCT MANUAL COUPLE WITH CONFIDENCE The Largest Manufacturer of Pipe Couplings, Flange Adaptors, Stepped Couplings, Dismantling Joints and related

More information