TSV991, TSV992, TSV994 TSV991A, TSV992A, TSV994A
|
|
|
- Michael Whitehead
- 7 years ago
- Views:
Transcription
1 TSV991, TSV992, TSV994 TSV991A, TSV992A, Rail-to-rail input/output 20 MHz GBP operational amplifiers Datasheet - production data SOT23-5 IN+ Pin connections (top view) DFN6 1.3x1.6x DFN8 2x VCC+ IN- VCC- Features Low input offset voltage: 1.5 mv max (A grade) Rail-to-rail input and output Wide bandwidth 20 MHz Stable for gain 4 or -3 Low power consumption: 820 µa typ High output current: 35 ma Operating from 2.5 V to 5.5 V Low input bias current, 1 pa typ ESD internal protection 5 kv Related products See TSV911, TSV912, and TSV914 for unity-gain stable amplifiers NC 3 MiniSO8, SO8 4 OUT Applications Battery-powered applications Portable devices Signal conditioning and active filtering Medical instrumentation Automotive applications SO14, TSSOP14 Description The TSV99x and TSV99xA family of single, dual, and quad operational amplifiers offers low voltage operation and rail-to-rail input and output. These devices feature an excellent speed/power consumption ratio, offering a 20 MHz gainbandwidth, stable for gains above 4 (100 pf capacitive load), while consuming only 1.1 ma maximum at 5 V. They also feature an ultra-low input bias current. These characteristics make the TSV99x family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering. These characteristics make the TSV99x, TSV99xA family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering. November 2015 DocID12833 Rev 12 1/28 This is information on a product in full production.
2 Contents TSV991, TSV992, TSV994 TSV991A, TSV992A, Contents 1 Absolute maximum ratings and operating conditions Electrical characteristics Electrical characteristic curves Application information Driving resistive and capacitive loads PCB layouts Macromodel Package information SOT23-5 package information DFN8 2 x 2 package information DFN6 1.3 x 1.6 x 0.55 package information MiniSO8 package information SO8 package information SO14 package information TSSOP14 package information Ordering information Revision history /28 DocID12833 Rev 12
3 TSV991, TSV992, TSV994 TSV991A, TSV992A, Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1: Absolute maximum ratings (AMR) Symbol Parameter Value Unit V CC Supply voltage (1) 6 V id Differential input voltage (2) ±V CC V in Input voltage (3) (V CC-) to (V CC+) I in Input current (4) 10 ma T stg Storage temperature -65 to 150 T j Maximum junction temperature 150 R thja R thjc ESD Thermal resistance junction to ambient (5)(6) Thermal resistance junction to case DFN8 2x2 57 DFN6 1.3x1.6x SOT SO8 125 MiniSO8 190 SO TSSOP SOT SO8 40 MiniSO8 39 SO14 31 TSSOP14 32 HBM: human body model (7) 5 kv MM: machine model (8) 400 CDM: charged device model (9) SOT23-5, SO8, MiniSO8, DFN8 2x2 DFN6 1.3x1.6x TBD TSSOP SO Latch-up immunity 200 ma Notes: (1) Value is with respect to the VCC- pin (2) Differential voltages are the non-inverting input terminal with respect to the inverting input terminal (3) VCC - V IN must not exceed 6 V (4) Input current must be limited by a resistor in series with the inputs (5) Short-circuits can cause excessive heating and destructive dissipation (6) Rth are typical values (7) Human body model: 100 pf discharged through a 1.5 kω resistor between two pins of the device, done for all couples of pin combinations with other pins floating. V C C/W V DocID12833 Rev 12 3/28
4 Absolute maximum ratings and operating conditions TSV991, TSV992, TSV994 TSV991A, TSV992A, (8) Machine model: 200 pf charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating (9) Charged device model: all pins plus packages are charged together to the specified voltage and then discharged directly to the ground. Table 2: Operating conditions Symbol Parameter Value Unit V CC Supply voltage 2.5 to 5.5 V icm Common mode input voltage range (V CC-) to (V CC+) V T op Operating free air temperature range -40 to 125 C 4/28 DocID12833 Rev 12
5 TSV991, TSV992, TSV994 TSV991A, TSV992A, Electrical characteristics 2 Electrical characteristics In the electrical characteristic tables below, all parameter limits at temperatures other than 25 C are guaranteed by correlation. Table 3: Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature range (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit V io Offset voltage, TSV99x Offset voltage, TSV99xA DC performance T op = 25 C T min < T op < T max 7.5 T op = 25 C 1.5 T min < T op < T max 3 V io/ T Input offset voltage drift 2 μv/ C Input offset current, T op = 25 C 1 10 I io V out = V CC/2 (1) T min < T op < T max 100 pa Input bias current, T op = 25 C 1 10 I ib V out = V CC/2 (1) T min < T op < T max 100 CMR A vd V CC - V OH V OL I out I CC GBP Gain Common mode rejection ratio, 20 log (ΔV ic/δv io) Large signal voltage gain High-level output voltage Low-level output voltage I sink I source Supply current (per channel) Gain bandwidth product Minimum gain for stability 0 V to 2.5 V, V out = 1.25 V, T op = 25 C T min < T op < T max 53 R L = 10 kω, V out = 0.5 V to 2 V, T op = 25 C T min < T op < T max 75 R L = 10 kω, T min < T op < T max R L = 600 Ω, T min < T op < T max R L = 10 kω, T min < T op < T max R L = 600 Ω, T min < T op < T max V o = 2.5 V, T op = 25 C T min < T op < T max 16 V o = 0 V, T op = 25 C T min < T op < T max 16 No load, V out = V CC/2, T min < T op < T max AC performance R L = 2 kω, C L = 100 pf, f = 100 khz, T op = 25 C Phase margin = 45, R f = 10 kω, R L = 2 kω, C L = 100 pf, T op = 25 C, positive gain configuration DocID12833 Rev 12 5/28 mv db mv ma 20 MHz 4 V/V
6 Electrical characteristics TSV991, TSV992, TSV994 TSV991A, TSV992A, Symbol Parameter Conditions Min. Typ. Max. Unit Gain SR e n THD+N Minimum gain for stability Slew rate Equivalent input noise voltage Notes: (1) Guaranteed by design Total harmonic distortion Phase margin = 45, R f = 10 kω, R L = 2 kω, C L = 100 pf, T op = 25 C, negative gain configuration R L = 2 kω, C L = 100 pf, T op = 25 C -3 V/V 10 V/μs f = 10 khz, T op = 25 C 21 nv/ Hz G = -3, f = 1 khz, R L = 2 kω, Bw = 22 khz, V icm = V CC/2, V out = 2 V pp, T op = 25 C % 6/28 DocID12833 Rev 12
7 TSV991, TSV992, TSV994 TSV991A, TSV992A, Electrical characteristics Table 4: Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature range (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit V io Offset voltage, TSV99x Offset voltage, TSV99xA DC performance T op = 25 C T min < T op < T max 7.5 T op = 25 C 1.5 T min < T op < T max 3 V io/ T Input offset voltage drift 2 μv/ C Input offset current, T op = 25 C 1 10 I io V out = V CC/2 (1) T min < T op < T max 100 pa Input bias current, T op = 25 C 1 10 I ib V out = V CC/2 (1) T min < T op < T max 100 CMR A vd V CC - V OH V OL I out I CC GBP Gain SR Common mode rejection ratio, 20 log (ΔV ic/δv io) Large signal voltage gain High-level output voltage Low-level output voltage I sink I source Supply current (per channel) Gain bandwidth product Minimum gain for stability Slew rate 0 V to 3.3 V, V out = 1.65 V, T op = 25 C T min < T op < T max 55 R L = 10 kω, V out = 0.5 V to 2.8 V, T op = 25 C T min < T op < T max 75 R L = 10 kω, T min < T op < T max R L = 600 Ω, T min < T op < T max R L = 10 kω, T min < T op < T max R L = 600 Ω, T min < T op < T max V o = 3.3 V, T op = 25 C T min < T op < T max 16 V o = 0 V, T op = 25 C T min < T op < T max 16 No load, V out = V CC/2, T min < T op < T max AC performance R L = 2 kω, C L = 100 pf, f = 100 khz, T op = 25 C Phase margin = 45, R f = 10 kω, R L = 2 kω, C L = 100 pf, T op = 25 C, positive gain configuration Phase margin = 45, R f = 10 kω, R L = 2 kω, C L = 100 pf, T op = 25 C, negative gain configuration R L = 2 kω, C L = 100 pf, f = 100 khz, T op = 25 C mv db mv ma 20 MHz 4-3 V/V 10 V/μs DocID12833 Rev 12 7/28
8 Electrical characteristics TSV991, TSV992, TSV994 TSV991A, TSV992A, Symbol Parameter Conditions Min. Typ. Max. Unit e n THD+N Equivalent input noise voltage Notes: (1) Guaranteed by design Total harmonic distortion f = 10 khz, T op = 25 C 21 nv/ Hz G = -3, f = 1 khz, R L = 2 kω, Bw = 22 khz, V icm = V CC/2, V out = 2.8 V pp, T op = 25 C % 8/28 DocID12833 Rev 12
9 TSV991, TSV992, TSV994 TSV991A, TSV992A, Electrical characteristics Table 5: Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature range (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit V io Offset voltage, TSV99x Offset voltage, TSV99xA DC performance T op = 25 C T min < T op < T max 7.5 T op = 25 C 1.5 T min < T op < T max 3 V io/ T Input offset voltage drift 2 μv/ C Input offset current, T op = 25 C 1 10 I io V out = V CC/2 (1) T min < T op < T max 100 pa Input bias current, T op = 25 C 1 10 I ib V out = V CC/2 (1) T min < T op < T max 100 CMR SVR A vd V CC - V OH V OL I out I CC GBP Gain Common mode rejection ratio, 20 log (ΔV ic/δv io) Supply voltage rejection ratio, 20 log (ΔV cc/δv io) Large signal voltage gain High-level output voltage Low-level output voltage I sink I source Supply current (per channel) Gain bandwidth product Minimum gain for stability 0 V to 5 V, V out = 2.5 V, T op = 25 C T min < T op < T max V CC = 2.5 V to 5 V R L = 10 kω, V out = 0.5 V to 4.5 V, T op = 25 C T min < T op < T max 75 R L = 10 kω, T min < T op < T max R L = 600 Ω, T min < T op < T max R L = 10 kω, T min < T op < T max R L = 600 Ω, T min < T op < T max V o = 5 V, T op = 25 C T min < T op < T max 16 V o = 0 V, T op = 25 C T min < T op < T max 16 No load, V out = 2.5 V, T min < T op < T max AC performance R L = 2 kω, C L = 100 pf, f = 100 khz, T op = 25 C Phase margin = 45, R f = 10 kω, R L = 2 kω, C L = 100 pf, T op = 25 C, positive gain configuration Phase margin = 45, R f = 10 kω, R L = 2 kω, C L = 100 pf, T op = 25 C, negative gain configuration mv db mv ma 20 MHz 4-3 V/V DocID12833 Rev 12 9/28
10 Electrical characteristics TSV991, TSV992, TSV994 TSV991A, TSV992A, Symbol Parameter Conditions Min. Typ. Max. Unit SR e n THD+N Slew rate Equivalent input noise voltage Notes: (1) Guaranteed by design Total harmonic distortion R L = 2 kω, C L = 100 pf, f = 100 khz, T op = 25 C 10 V/μs f = 10 khz, T op = 25 C 21 nv/ Hz G = -3, f = 1 khz, R L = 2 kω, Bw = 22 khz, V icm = V CC/2, V out = 4.4 V pp, T op = 25 C % 10/28 DocID12833 Rev 12
11 TSV991, TSV992, TSV994 TSV991A, TSV992A, Electrical characteristic curves 3 Electrical characteristic curves Figure 1: Input offset voltage distribution at T = 25 C Figure 2: Input offset voltage distribution at T = 125 C Quantity of parts Vcc=5V Vicm=2.5V Tamb=25 C Quantity of parts Inpu t offs et Voltage (mv) Inpu t offs et Voltage (mv) Figure 3: Supply current vs. input common-mode voltage at VCC = 2.5 V Figure 4: Supply current vs. input common-mode voltage at VCC = 5 V Figure 5: Output current vs. output voltage at VCC = 2.5 V Figure 6: Output current vs. output voltage at VCC = 5 V DocID12833 Rev 12 11/28
12 Electrical characteristic curves Figure 7: Voltage gain and phase vs frequency at VCC = 5 V and Vicm = 0.5 V TSV991, TSV992, TSV994 TSV991A, TSV992A, Figure 8: Voltage gain and phase vs frequency at VCC = 5 V and Vicm = 2.5 V Phase ( ) Phase ( ) Figure 9: Positive slew rate Figure 10: Negative slew rate Vin : from 0.5V to Vcc-0.5V SR : calculated from 10% to 90% Vin : from 0.5V to Vcc-0.5V SR : calculated from 10% to 90% Figure 11: Distortion + noise vs. frequency Figure 12: Distortion + noise vs. output voltage 12/28 DocID12833 Rev 12
13 TSV991, TSV992, TSV994 TSV991A, TSV992A, Figure 13: Noise vs. frequency Electrical characteristic curves Figure 14: Supply current vs. supply voltage DocID12833 Rev 12 13/28
14 Application information TSV991, TSV992, TSV994 TSV991A, TSV992A, 4 Application information 4.1 Driving resistive and capacitive loads These products are low-voltage, low-power operational amplifiers optimized to drive rather large resistive loads above 2 kω. TSV99x products are not unity gain stable. To ensure proper stability they must be used in a gain configuration, with a minimum gain of -3 or 4. However, they can be used in a follower configuration by adding a small, in-series resistor at the output, which drastically improves the stability of the device (Figure 15 shows the recommended in-series resistor values). Once the in-series resistor value has been selected, the stability of the circuit should be tested on the bench and simulated with the simulation model. Another way to improve stability and reduce peaking is to add a capacitor in parallel with the feedback resistor. As shown in Figure 16, the feedback capacitor drastically reduces the peaking versus capacitive load (inverting gain configuration, gain = -2). Figure 15: In-series resistor vs. capacitive load when TSV99x is used in follower configuration Figure 16: Peaking versus capacitive load, with or without feedback capacitor in inverting gain configuration 4.2 PCB layouts For correct operation, it is advised to add 10 nf decoupling capacitors as close as possible to the power supply pins. 4.3 Macromodel An accurate macromodel of the TSV99x is available on STMicroelectronics web site at This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV99x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It helps to validate a design approach and to select the right operational amplifier, however, it does not replace on-board measurements 14/28 DocID12833 Rev 12
15 TSV991, TSV992, TSV994 TSV991A, TSV992A, Package information 5 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. DocID12833 Rev 12 15/28
16 Package information TSV991, TSV992, TSV994 TSV991A, TSV992A, 5.1 SOT23-5 package information Figure 17: SOT23-5 package outline Table 6: SOT23-5 mechanical data Ref. Dimensions Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A B C D D e E F L K 0 degrees 10 degrees 0 degrees 10 degrees 16/28 DocID12833 Rev 12
17 TSV991, TSV992, TSV994 TSV991A, TSV992A, Package information 5.2 DFN8 2 x 2 package information Figure 18: DFN8 2 x 2 package outline Table 7: DFN8 2 x 2 mechanical data Ref. Dimensions Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A b D D E E e L ddd DocID12833 Rev 12 17/28
18 Package information TSV991, TSV992, TSV994 TSV991A, TSV992A, Figure 19: DFN8 2 x 2 recommended footprint The exposed pad of the DFN8 2x2 package is not internally connected. It can be set to ground. 18/28 DocID12833 Rev 12
19 TSV991, TSV992, TSV994 TSV991A, TSV992A, Package information 5.3 DFN6 1.3 x 1.6 x 0.55 package information Figure 20: DFN6 1.3 x 1.6 x 0.55 package outline DocID12833 Rev 12 19/28
20 Package information TSV991, TSV992, TSV994 TSV991A, TSV992A, Table 8: DFN6 1.3 x 1.6 x 0.55 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A B D E e L N aaa bbb ccc ddd eee Figure 21: DFN6 1.3 x 1.6 x 0.55 recommended footprint 20/28 DocID12833 Rev 12
21 TSV991, TSV992, TSV994 TSV991A, TSV992A, Package information 5.4 MiniSO8 package information Figure 22: MiniSO8 package outline Table 9: MiniSO8 mechanical data Ref. Dimensions Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A b c D E E e L L L k ccc DocID12833 Rev 12 21/28
22 Package information TSV991, TSV992, TSV994 TSV991A, TSV992A, 5.5 SO8 package information Figure 23: SO8 package outline Table 10: SO8 mechanical data Ref. Dimensions Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A b c D E E e h L L k ccc /28 DocID12833 Rev 12
23 TSV991, TSV992, TSV994 TSV991A, TSV992A, Package information 5.6 SO14 package information Figure 24: SO14 package outline Table 11: SO14 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A B C D E e H h L k 8 (max) ddd DocID12833 Rev 12 23/28
24 Package information TSV991, TSV992, TSV994 TSV991A, TSV992A, 5.7 TSSOP14 package information Figure 25: TSSOP14 package outline Table 12: TSSOP14 mechanical data Ref. Dimensions Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A b c D E E e L L k aaa /28 DocID12833 Rev 12
25 TSV991, TSV992, TSV994 TSV991A, TSV992A, Ordering information 6 Ordering information Table 13: Order codes Order code Temperature range Package Packing Marking TSV991ILT TSV991AILT TSV991IQ2T TSV991AIQ2T TSV991AIQ1T TSV992IST TSV992AIST TSV992IDT TSV992AIDT TSV994IPT IPT TSV994IDT IDT TSV991IYLT (1) TSV991AIYLT (1) TSV992IYDT (1) TSV992AIYDT (1) TSV992IYST (1) TSV992AIYST (1) TSV994IYDT (1) IYDT (1) TSV994IYPT (1) IYPT (1) -40 C to 125 C -40 C to 125 C automotive grade SOT23-5 DFN8 2x2 DFN6 1.3x1.6x0.55 MiniSO8 SO8 TSSOP14 SO14 SOT23-5 SO8 MiniSO8 SO14 TSSOP14 Tape and reel K130 K129 K1F K1E K5 K132 K135 V992I V992AI V994I V994AI V994I V994AI K149 K150 V992IY V992AY K149 K150 V994IY V994AY V994IY V994AY Notes: (1) Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent. In the table above, all packages except the SO14 are "moisture sensitivity level 1" as per Jedec J-STD-020-C. SO14 is Jedec level 3. DocID12833 Rev 12 25/28
26 Revision history TSV991, TSV992, TSV994 TSV991A, TSV992A, 7 Revision history Table 14: Document revision history Date Revision Changes 31-Jul Preliminary data release for product under development. 07-Nov Final version of datasheet. 12-Dec Noise and distortion figures added. 07-Jun Feb May Oct Jan Oct ESD tolerance modified for SO14, CDM in Table 1: "Absolute maximum ratings (AMR)". Automotive grade commercial products added in Table 13: "Order codes". Note about SO14 added in Table 13: "Order codes". Limits in temperature added in Section 2: "Electrical characteristics". Corrected MiniSO8 package information. Corrected footnote for automotive grade order codes in order code table. Improved presentation of package information. Added input current information in Table 1: "Absolute maximum ratings (AMR)". Added Section 3: "Application information". Updated all packages in Section 4: "Package information". Added new order codes: TSV991IYLT, TSV991AIYLT, TSV992IYST, TSV992AIYST, TSV994IYPT, IYPT in Table 13: "Order codes". Added A versions of devices in title on cover page. Added parameters for full temperature range in Table 3, Table 4, and Table 5. Removed gain margin and phase margin parameters in Table 3, Table 4, and Table 5. These parameters have been replaced by the gain parameter (minimum gain for stability). Added Figure 14 and Figure 16. Added parameters for full temperature range in Table 3, Table 4, and Table 5. Modified note relative to automotive grade in Table 13: "Order codes". Document status changed to production data. Modified gain value in Features and Description. Added DFN8 2x2 pin connection diagram. Table 1: "Absolute maximum ratings (AMR)": added package DFN8 2x2 to rows R thja and ESD. Table 3, Table 4, and Table 5: replaced DV io with ΔV io/δt; modified Gain and THD+N conditions and typical values. Figure 7 and Figure 8: added arrows indicating Gain and Phase. 26/28 DocID12833 Rev 12
27 TSV991, TSV992, TSV994 TSV991A, TSV992A, Revision history Date Revision Changes 22-Oct cont d 10-Mar Jun Nov Figure 11 and Figure 12: updated. Added Figure 18: "DFN8 2 x 2 mm (NB) package outline" and Figure 19: "DFN8 2 x 2 mm (NB) recommended footprint". Table 13: "Order codes": updated automotive grade qualification and added order code of DFN8 package. Table 13: "Order codes": added new commercial product TSV991AIQ2T; corrected Marking error for TSV991IQ2T from K1E to K1F. Added DFN6 1.3 x 1.6 x 0.55 package for new order code TSV991AIQ1T. Updated "L" dimension of Section 4: "DFN8 2 x 2 mm (NB) package information". Updated min "k" value of Section 4.5: "SO8 package information". Table 3, Table 4, and Table 5: modified that R L = 600 Ω (not 600 kω) for the high-level and low-level output voltage parameters. Section 5.2: updated name of package and titles of drawings and table; added note about exposed pad. Section 5.3: updated name of package DocID12833 Rev 12 27/28
28 TSV991, TSV992, TSV994 TSV991A, TSV992A, IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved 28/28 DocID12833 Rev 12
MC33079. Low noise quad operational amplifier. Features. Description
Low noise quad operational amplifier Datasheet production data Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion: 0.002% Large output voltage
TSV6290, TSV6290A, TSV6291, TSV6291A
Micropower with high merit factor CMOS operational amplifiers Features Low supply voltage: 1.5 V 5.5 V Rail-to-rail input and output Low input offset voltage: 800 µv max (A version) Low power consumption:
UA741. General-purpose single operational amplifier. Features. Applications. Description. N DIP8 (plastic package)
General-purpose single operational amplifier Datasheet - production data N DIP8 (plastic package) D SO8 (plastic micropackage) Pin connections (top view) 1 - Offset null 1 2 - Inverting input 3 - Non-inverting
TSV321, TSV358, TSV324, TSV321A, TSV358A, TSV324A,
TSV321, TSV358, TSV324, TSV321A, TSV358A, General purpose input/output rail-to-rail low-power operational amplifiers Datasheet - production data Pin connections (top view) SOT23-5 SO8 SO8, MiniSO8, TSSOP8
TSX561, TSX562, TSX564, TSX561A, TSX562A, TSX564A
TSX561, TSX562, TSX564, TSX561A, TSX562A, TSX564A Micropower, wide bandwidth (900 khz), 16 V CMOS operational amplifiers Datasheet - production data Benefits Power savings in power-conscious applications
LM2902. Low-power quad operational amplifier. Features. Description
Low-power quad operational amplifier Datasheet production data Features Wide gain bandwidth: 1.3 MHz Input common-mode voltage range includes negative rail Large voltage gain: 100 db Very low supply current
LM2901. Low-power quad voltage comparator. Features. Description
Low-power quad voltage comparator Features Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of supply voltage
TS555. Low-power single CMOS timer. Description. Features. The TS555 is a single CMOS timer with very low consumption:
Low-power single CMOS timer Description Datasheet - production data The TS555 is a single CMOS timer with very low consumption: Features SO8 (plastic micropackage) Pin connections (top view) (I cc(typ)
LM833 LOW NOISE DUAL OPERATIONAL AMPLIFIER
LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW VOLTAGE NOISE: 4.5nV/ Hz HIGH GAIN BANDWIDTH PRODUCT: 15MHz HIGH SLEW RATE: 7V/µs LOW DISTORTION:.2% EXCELLENT FREQUENCY STABILITY ESD PROTECTION 2kV DESCRIPTION
STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load
Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP
1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for
Description. Table 1. Device summary
2 A positive voltage regulator IC Description Datasheet - production data Features TO-220 Output current up to 2 A Output voltages of 5; 7.5; 9; 10; 12; 15; 18; 24 V Thermal protection Short circuit protection
Description SO-8. Table 1. Device summary. Order codes. SO-8 (tape and reel) TO-92 (Bag) TO-92 (Ammopack) TO-92 (tape and reel)
Low current 1.2 to 37 V adjustable voltage regulators Description Datasheet - production data TO-92 SO-8 TO-92 Tape and reel Bag Ammopack Features Outuput voltage range: 1.2 to 37 V Output current up to
TL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
TS321 Low Power Single Operational Amplifier
SOT-25 Pin Definition: 1. Input + 2. Ground 3. Input - 4. Output 5. Vcc General Description The TS321 brings performance and economy to low power systems. With high unity gain frequency and a guaranteed
L78. Positive voltage regulator ICs. Description. Features
Positive voltage regulator ICs Description Datasheet - production data TO-220 Features DPAK TO-220FP D²PAK Output current up to 1.5 A Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V Thermal overload
L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
TL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
LM337. Three-terminal adjustable negative voltage regulators. Features. Description
Three-terminal adjustable negative voltage regulators Datasheet - production data current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional
LM217M, LM317M. Medium current 1.2 to 37 V adjustable voltage regulator. Description. Features
Medium current 1.2 to 37 V adjustable voltage regulator Datasheet - production data Description The LM217M and LM317M are monolithic integrated circuits in DPAK package used as positive adjustable voltage
STIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
DSL03. Low capacitance TVS for high speed lines such as xdsl. Description. Features. Complies with the following standards
Low capacitance TVS for high speed lines such as xdsl Description Datasheet - production data Features High surge capability to comply with GR-1089 and ITU-T K20/21 Keeps its peak power capability up to
LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
Description SO-8. series. Furthermore, in the 8-pin configuration Very low-dropout voltage (0.2 V typ.)
ery low-dropout voltage regulator with inhibit function TO-92 Bag TO-92 Tape and reel Ammopack 1 2 3 SO-8 Description Datasheet - production data The is a very low-dropout voltage regulator available in
STWD100. Watchdog timer circuit. Description. Features. Applications
Watchdog timer circuit Description Datasheet - production data SOT23-5 (WY) Features SC70-5, SOT323-5 (W8) Current consumption 13 µa typ. Available watchdog timeout periods are 3.4 ms, 6.3 ms, 102 ms,
Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking
14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully
STLM20. Ultra-low current 2.4 V precision analog temperature sensor. Features. Applications
Ultra-low current 2.4 V precision analog temperature sensor Features Precision analog voltage output temperature sensor ±1.5 C maximum temperature accuracy at 25 C (±0.5 C typical) Ultra-low quiescent
Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)
NE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description
NE555 SA555 - SE555 General-purpose single bipolar timers Features Low turn-off time Maximum operating frequency greater than 500 khz Timing from microseconds to hours Operates in both astable and monostable
Precision, Unity-Gain Differential Amplifier AMP03
a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation
MC34063AB, MC34063AC, MC34063EB, MC34063EC
MC34063AB, MC34063AC, MC34063EB, MC34063EC DC-DC converter control circuits Description Datasheet - production data Features DIP-8 SO-8 Output switch current in excess of 1.5 A 2 % reference accuracy Low
TDA2004R. 10 + 10 W stereo amplifier for car radio. Features. Description
10 + 10 W stereo amplifier for car radio Features Low distortion Low noise Protection against: Output AC short circuit to ground Overrating chip temperature Load dump voltage surge Fortuitous open ground
NE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description
NE555 SA555 - SE555 General-purpose single bipolar timers Features Low turn-off time Maximum operating frequency greater than 500 khz Timing from microseconds to hours Operates in both astable and monostable
L78L. Positive voltage regulators. Description. Features
Positive voltage regulators Datasheet - production data Features Output current up to 100 ma Output voltages of 3.3; 5; 6; 8; 9; 10; 12; 15; 18; 24 V thermal overload protection Short-circuit protection
STPS5L60. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet - production data Description Power Schottky rectifier suited for switch mode power supplies and high frequency inverters. This device is intended for use in low voltage
STCS1. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3x3 mm)
TDA2003 10W CAR RADIO AUDIO AMPLIFIER
TDA2003 10W CAR RADIO AUDIO AMPLIFIER DESCRIPTION The TDA 2003 has improved performance with the same pin configuration as the TDA 2002. The additional features of TDA 2002, very low number of external
www.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LF411 Low Offset, Low Drift JFET Input Operational Amplifier General Description
High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
LM135-LM235-LM335. Precision temperature sensors. Features. Description
Precision temperature sensors Features Directly calibrated in K 1 C initial accuracy Operates from 450µA to 5mA Less than 1Ω dynamic impedance TO-92 (Plastic package) Description The LM135, LM235, LM335
STCS1A. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3 x 3
ULN2801A, ULN2802A, ULN2803A, ULN2804A
ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral
SiGe:C Low Noise High Linearity Amplifier
Rev. 2 21 February 2012 Product data sheet 1. Product profile 1.1 General description The is a low noise high linearity amplifier for wireless infrastructure applications. The LNA has a high input and
ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards
ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved
Obsolete Product(s) - Obsolete Product(s)
Vertical deflection booster for 3 App TV/monitor applications with 0 V flyback generator Features Figure. Heptawatt package Power amplifier Flyback generator Stand-by control Output current up to 3.0 App
ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323
Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4
50 ohm nominal input / conjugate match balun to nrf51822- CEAA/CDAB/CFAC and nrf51422-ceaa/cdab/cfac. Benefits. Description
50 ohm nominal input / conjugate match balun to nrf51822- /CDAB/CFAC and nrf51422-/cdab/cfac Datasheet production data Benefits Very low profile: < 560 µm after reflow High RF performance RF BOM and area
Order code Temperature range Package Packaging
ST485B ST485C Low power RS-485/RS-422 transceiver Features Low quiescent current: 300 µa Designed for RS-485 interface application - 7 V to 12 V common mode input voltage range Driver maintains high impedance
DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards
-xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits
Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER
Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER FEATURES HIGH GAIN-BANDWIDTH: 35MHz LOW INPUT NOISE: 1nV/ Hz HIGH SLEW RATE: V/µs FAST SETTLING: 24ns to.1% FET INPUT: I B = 5pA max HIGH OUTPUT
Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
Features. Ordering Information. * Underbar marking may not be to scale. Part Identification
MIC86 Teeny Ultra Low Power Op Amp General Description The MIC86 is a rail-to-rail output, input common-mode to ground, operational amplifier in Teeny SC7 packaging. The MIC86 provides 4kHz gain-bandwidth
LF412 Low Offset Low Drift Dual JFET Input Operational Amplifier
LF412 Low Offset Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost high speed JFET input operational amplifiers with very low input offset voltage and guaranteed
DDSL01. Secondary protection for DSL lines. Features. Description
Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description
TSH70, TSH71, TSH72, TSH73, TSH74, TSH75
TSH7, TSH7, TSH72, TSH73, TSH74, TSH7 Rail-to-rail, wide-band, low-power operational amplifiers Datasheet - production data Output VCC - 2 - Non-Inv. In. 3 TSH7 : SOT23-/SO8 TSH7 : SO8/TSSOP8 NC 8 STANDBY
Obsolete Product(s) - Obsolete Product(s)
32 W hi-fi audio power amplifier Features High output power (50 W music power IEC 268.3 rules) High operating supply voltage (50 V) Single or split supply operations Very low distortion Short-circuit protection
Description. 5k (10k) - + 5k (10k)
THAT Corporation Low Noise, High Performance Microphone Preamplifier IC FEATURES Excellent noise performance through the entire gain range Exceptionally low THD+N over the full audio bandwidth Low power
Rail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails
MUSES8920. High Quality Audio J-FET Input Dual Operational Amplifier - 1 -
MUSES89 High Quality Audio J-FET Input Dual Operational Amplifier GENERAL DESCRIPTION The MUSES89 is a high quality Audio J-FET input dual operational amplifier. This is a mass production model of MUSES
28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
ULN2001, ULN2002 ULN2003, ULN2004
ULN2001, ULN2002 ULN2003, ULN2004 Seven Darlington array Datasheet production data Features Seven Darlingtons per package Output current 500 ma per driver (600 ma peak) Output voltage 50 V Integrated suppression
PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS
BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
HA-5104/883. Low Noise, High Performance, Quad Operational Amplifier. Features. Description. Applications. Ordering Information. Pinout.
HA5104/883 April 2002 Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Low Input Noise Voltage Density at 1kHz. 6nV/ Hz (Max)
AN4368 Application note
Application note Signal conditioning for pyroelectric passive infrared (PIR) sensors Sylvain Colliard-Piraud Introduction Pyroelectric passive infrared (PIR) sensors are widely used in daily life. They
STCS2A. 2 A max constant current LED driver. Features. Applications. Description
2 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 2 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic Slope control with
STTH1R04-Y. Automotive ultrafast recovery diode. Features. Description
Automotive ultrafast recovery diode Features Datasheet - production data K SMA STTH1R4AY Table 1. Device summary Symbol Value I F(AV) 1 A V RRM 4 V T j (max) 175 C V F (typ) t rr (typ) A K.9 V 14 ns A
Description. Table 1. Device summary. Order code Package Packing
4 x 41 W quad bridge car radio amplifier Datasheet - production data Features Flexiwatt25 High output power capability: 4 x 41 W / 4 max. Low distortion Low output noise Standby function Mute function
High Speed, Low Cost, Triple Op Amp ADA4861-3
High Speed, Low Cost, Triple Op Amp ADA486-3 FEATURES High speed 73 MHz, 3 db bandwidth 625 V/μs slew rate 3 ns settling time to.5% Wide supply range: 5 V to 2 V Low power: 6 ma/amplifier. db flatness:
LM118/LM218/LM318 Operational Amplifiers
LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They
TS34119 Low Power Audio Amplifier
SOP-8 DIP-8 Pin assignment: 1. CD 8. VO2 2. FC2 7. Gnd 3. FC1 6. Vcc 4. Vin 5. VO1 General Description The TS34119 is a low power audio amplifier, it integrated circuit intended (primarily) for telephone
Supertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit
32-Channel High Voltage Amplifier Array Features 32 independent high voltage amplifiers 3V operating voltage 295V output voltage 2.2V/µs typical output slew rate Adjustable output current source limit
TLI4946. Datasheet TLI4946K, TLI4946-2K, TLI4946-2L. Sense and Control. May 2009
May 2009 TLI4946 High Precision Hall Effect Latches for Industrial and Consumer Applications TLI4946K, TLI4946-2K, TLI4946-2L Datasheet Rev. 1.0 Sense and Control Edition 2009-05-04 Published by Infineon
P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
Trench gate field-stop IGBT, M series 650 V, 10 A low loss. Features. Description
Trench gate field-stop IGBT, M series 650 V, 10 A low loss Datasheet - production data TAB D2PAK 1 3 Features 6 µs of short-circuit withstand time VCE(sat) = 1.55 V (typ.) @ IC = 10 A Tight parameter distribution
CLASS-D VERTICAL DEFLECTION AMPLIFIER FOR TV AND MONITOR APPLICATION OUT CFLY + CFLY - BOOT VREG FEEDCAP FREQ. July 2001 1/8
CLASS-D VERTICAL DEFLECTION AMPLIFIER FOR TV AND MONITOR APPLICATION FEATURES PRELIMINARY DATA HIGH EFFICIENCY POWER AMPLIFIER NO HEATSINK SPLIT SUPPLY INTERNAL FLYBACK GENERATOR OUTPUT CURRENT UP TO.5
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost high speed dual JFET input operational amplifiers with an internally trimmed input offset voltage
ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
TDA2822 DUAL POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 3 V LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION
TDA2822 DUAL POER AMPLIFIER SUPPLY VOLTAGE DON TO 3 V. LO CROSSOVER DISTORSION LO QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION DESCRIPTION The TDA2822 is a monolithic integrated circuit in 12+2+2 powerdip,
L6384E. High voltage half-bridge driver. Description. Features. Applications
High voltage half-bridge driver Description Datasheet - production data Features High voltage rail up to 600 V dv/dt immunity ± 50 V/nsec in full temperature range Driver current capability 400 ma source
Description. Output Stage. 5k (10k) - + 5k (10k)
THAT Corporation Low Noise, High Performance Audio Preamplifier IC FEATURES Low Noise: 1 nv/hz input noise (60dB gain) 34 nv/hz input noise (0dB gain) (1512) Low THD+N (full audio bandwidth): 0.0005% 40dB
DATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08
INTEGRATED CIRCUITS DATA SHEET power amplifier with diagnostic facility Supersedes data of March 1994 File under Integrated Circuits, IC01 1996 Jan 08 FEATURES Requires very few external components High
NCS7101, NCV7101. 1.8 Volt Rail-to-Rail Operational Amplifier LOW VOLTAGE RAIL TO RAIL OPERATIONAL AMPLIFIER
NCS711, NCV711 1.8 Volt RailtoRail Operational Amplifier The NCS711 operational amplifier provides railtorail operation on both the input and output. The output can swing within 5 mv of each rail. This
Features. Description. Table 1. Device summary. Order code Marking Package Packing. STP110N8F6 110N8F6 TO-220 Tube
N-channel 80 V, 0.0056 Ω typ.,110 A, STripFET F6 Power MOSFET in a TO-220 package Features Datasheet - production data Order code V DS R DS(on)max I D P TOT TAB STP110N8F6 80 V 0.0065 Ω 110 A 200 W TO-220
ADJUSTABLE VOLTAGE AND CURRENT REGULATOR
L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR ADJUSTABLE OUTPUT CURRENT UP TO 2 A (GUARANTEED UP TO Tj = 150 C) ADJUSTABLE OUTPUT VOLTAGE DOWN TO 2.85 V INPUT OVERVOLTAGE PROTECTION (UP TO 60 V, 10 ms)
Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8
Product Description Sirenza Microdevices SGC-689Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides
LM1036 Dual DC Operated Tone/Volume/Balance Circuit
LM1036 Dual DC Operated Tone/Volume/Balance Circuit General Description The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems.
AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)
Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:
3-Channel Supervisor IC for Power Supply
3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce
High Speed, Low Power Dual Op Amp AD827
a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential
TDA2040. 20W Hi-Fi AUDIO POWER AMPLIFIER
20W Hi-Fi AUDIO POWER AMPLIFIER DESCRIPTION The TDA2040 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Typically it provides 22W output power
74HCU04. 1. General description. 2. Features and benefits. 3. Ordering information. Hex unbuffered inverter
Rev. 7 8 December 2015 Product data sheet 1. General description The is a hex unbuffered inverter. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to
L78M00 SERIES POSITIVE VOLTAGE REGULATORS. www.tvsat.com.pl
SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT TO 0.5A OUTPUT VOLTAGES OF 5; 6; 8; 9; 10; 12; 15; 18; 20; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSISTOR SOA PROTECTION DESCRIPTION
ICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET
DATASHEET ICS514 Description The ICS514 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for
LF442 Dual Low Power JFET Input Operational Amplifier
LF442 Dual Low Power JFET Input Operational Amplifier General Description The LF442 dual low power operational amplifiers provide many of the same AC characteristics as the industry standard LM1458 while
The sensor can be operated at any frequency between DC and 1 MHz.
Rev. 6 18 November 2010 Product data sheet 1. Product profile 1.1 General description The is a sensitive magnetic field sensor, employing the magneto-resistive effect of thin film permalloy. The sensor
VN5R003H-E. 3 mω reverse battery protection switch. Features. Description. Application
3 mω reverse battery protection switch Datasheet production data Features Max supply voltage V CC -16 to 41 V Operating voltage range V CC -16 to 28 V On-state resistance R ON 3mΩ General Optimized electromagnetic
Description. Table 1. Device summary. Order code Temperature range Package Packing Marking
8-bit shift register with output latches (3-state) Applicatio Datasheet - production data SO16 TSSOP16 Automotive Industrial Computer Coumer Features High speed: f MAX = 59 MHz (typ.) at V CC = 6 V Low
BD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor
Low voltage PNP power transistor Features Low saturation voltage PNP transistor Applications Audio, power linear and switching applications Description The device is manufactured in planar technology with