Information. Circulating Fluid Temperature Controller Thermo-chiller Compact Type. Lightweight. HRG(C)005 (Conventional model) HRS050. Options.

Transcription

1 Information kihabara UDX 15F, , Sotokanda, Chiyoda-ku, Tokyo 11-21, JPN SMC Corporation ll Rights Reserved Circulating Fluid Temperature Controller Thermo-chiller Compact Type Series HRS 47 /51 (5/6 Hz) cooling capacity added! (HRS5) Compact/ Space-saving Lightweight 1-E569 D-DN Printing PQ 1245SZ (Except HRS5) RoHS New HRS5 eight 69 kg HRG(C)5 (Conventional model) Footprint reduced by 32% Volume reduced by 42% eight reduced by 43% 976 mm New 377 mm Variations Model HRS12 HRS18 HRS24 HRS5 592 mm Comparison with Conventional Model HRG(C)5 Series HRS5 Temperature stability: ±.1 C Temperature range setting: 5 to 4 C High-lift pump available as standard (For HRS5) s idth (mm) Cooling capacity () 11/13 (5/6 Hz) 17/19 (5/6 Hz) 21/24 (5/6 Hz) 47/51 (5/6 Hz) ir-cooled ater-cooled ir-cooled HRG(C)5 (Conventional model) Depth (mm) Height (mm) eight (kg) Production of HRG(C)5 will be discontinued at the end of March 211. ith earth leakage breaker ith automatic water supply function pplicable to DI water (deionized water) piping Single-phase 1 VC (5/6 Hz), 115 VC (6 Hz) Single-phase 2 to 23 VC (5/6 Hz) International standards CE/UL Single-phase 2 to 23 VC (5/6 Hz) Single-phase 2 to 23 VC (5/6 Hz) Scheduled for 211 UL standards: pplicable to 6 Hz only 1

2 Thermo-chiller Series HRS How to Order Compact Type (Except HRS5) RoHS Single-phase 1/115 VC HRS 18 1 Cooling capacity CE/UL 12 Cooling capacity 11/13 (5/6 Hz) 18 Cooling capacity 15/17 (5/6 Hz) Note) UL standards: pplicable to 6 Hz only ir-cooled ater-cooled Pipe thread type Rc F G (with PT-G conversion fitting set) N NPT (with PT-NPT conversion fitting set) Specifications There are different values from standard specifications. Symbol B J M None ith earth leakage breaker ith automatic water supply function pplicable to DI water (deionized water) piping hen multiple options are combined, indicate symbols in alphabetical order. Note) Symbol Single-phase 1 VC (5/6 Hz) VC (6 Hz) Note) UL standards: pplicable to 6 Hz only Model Refrigerant Control method temperature/humidity Note 2) Circulating fluid Note 3) Temperature range setting Note 2) ( C) Cooling capacity Note 4) (5/6 Hz) () Temperature stability Note 6) ( C) Pump capacity Note 7) (5/6 Hz) (MPa) Rated flow Note 8) (5/6 Hz) (L/min) Tank capacity (L) Circulating fluid system Note 1) Facility water system Electrical system Circuit protector () pplicable earth leakage breaker capacity Note 9) () Rated operating current (5/6 Hz) () Rated power consumption Note 4) (5/6 Hz) (kv) Noise level Note 1) (5/6 Hz) (db) ccessories eight Note 11) (kg) etted parts material Temperature range ( C) Pressure range (MPa) Required flow rate Note 12) (5/6 Hz) (L/min) Inlet-outlet pressure differential of facility water (MPa) etted parts material HRS HRS HRS HRS ir-cooled ater-cooled ir-cooled ater-cooled R47C (HFC) PID control Temperature: 5 to 4 C, Humidity: 3 to 7% Clear water, 15% ethylene glycol aqueous solution Note 5) 5 to 4 11/13 15/17 ±.1.13/.18 (at 7 L/min) 7/7 pprox. 5 Stainless steel, Copper (Heat exchanger brazing), Bronze, lumina ceramic, Carbon, Polypropylene, PE, POM, FKM, EPDM, PVC 5 to 4 5 to 4.3 to.5.3 to or more.3 or more Stainless steel, Copper (Heat exchanger brazing), Bronze, Synthetic rubber Single-phase 1 VC (5/6 Hz), 115 VC (6 Hz) llowable voltage range ±1% /8.3.7/.8 7.7/8.4.8/.8 58/55 Fitting (for drain outlet) 1 pc., Input/output signal connector 1 pc., connector 1 pc., Operation manual (for installation/operation) 1, Quick manual (with a clear case) 1, larm code list sticker 1, Ferritic core (for communication) 1 pc. 4 Note 1) For water-cooled Note 2) It should have no condensation. Note 3) If clear water is used, use water that conforms to ater Quality Standards of the Japan Refrigeration and ir Conditioning Industrial ssociation (JR GL cooling water system - circulating type - make-up water). Note 4) q temperature:, w Circulating fluid temperature: 2 C, e Rated circulating fluid flow rate, r Circulating fluid: Clear water, t Facility water temperature: Note 5) Use a 15% ethylene glycol aqueous solution if operating in a place where the circulating fluid temperature is 1 C or less. Note 6) Outlet temperature when the circulating fluid flow is rated flow, and the circulating fluid outlet and return port are directly connected. Installation environment and the power supply are within specification range and stable. Note 7) The capacity at the Thermo-chiller outlet when the circulating fluid temperature is 2 C. Note 8) Required flow rate for cooling capacity or maintaining the temperature stability. The specification of the cooling capacity and the temperature stability may not be satisfied if the flow rate is lower than the rated flow. Note 9) Purchase an earth leakage breaker with current sensitivity of 15 m or 3 m separately. ( product with an optional earth leakage breaker (option B) is also available.) Note 1) Front: 1 m, height: 1 m, stable with no load, Other conditions Note 4) Note 11) eight in the dry state without circulating fluids Note 12) Required flow rate when a load for the cooling capacity is applied at a circulating fluid temperature of 2 C, and rated circulating fluid flow rate and facility water temperature of. 2

3 Single-phase 2 to 23 VC HRS 18 2 Cooling capacity 12 Cooling capacity 11/13 (5/6 Hz) 18 Cooling capacity 17/19 (5/6 Hz) 24 Cooling capacity 21/24 (5/6 Hz) 5 Cooling capacity 47/51 (5/6 Hz) CE/UL Note) UL standards: pplicable to 6 Hz only pplicable model Symbol HRS12 HRS18 HRS24 HRS5 ir-cooled ater-cooled How to Order Pipe thread type Rc F G (with PT-G conversion fitting set) N NPT (with PT-NPT conversion fitting set) Specifications There are different values from standard specifications. Circuit protector () pplicable earth leakage breaker capacity Note 9) () Rated operating current (5/6 Hz) () Rated power consumption Note 4) (5/6 Hz) (kv) Noise level Note 1) (5/6 Hz) (db) ccessories eight Note 11) (kg) Symbol B J M T G None ith earth leakage breaker ith automatic water supply function pplicable to DI water (deionized water) piping High-lift pump Note 1) High-temperature environment specifications Note 2) hen multiple options are combined, indicate symbols in alphabetical order. Note 1) The cooling capacity reduces about 3 from the value in the catalog. For HRS5, high-lift pump is available as standard. Note 2) ir-cooled 2 V types, HRS12/18/ 24 only Not UL-compliant (scheduled for 211) Note) Symbol 2 Single-phase 2 to 23 VC (5/6 Hz) Note) UL standards: pplicable to 6 Hz only Model HRS HRS HRS HRS HRS HRS HRS5- -2 ir-cooled ater-cooled ir-cooled ater-cooled ir-cooled ater-cooled ir-cooled Refrigerant Control method R47C (HFC) PID control R41 (HFC) temperature/humidity Note 2) Temperature: 5 to 4 C, High-temperature environment specifications (option): 5 to 45 C, Humidity: 3 to 7% Circulating fluid Note 3) Clear water, 15% ethylene glycol aqueous solution Note 5) Temperature range setting Note 2) ( C) 5 to 4 Cooling capacity Note 4) (5/6 Hz) () 11/13 17/19 21/24 47/51 Temperature stability Note 6) ( C) ±.1 Pump capacity Note 7) (5/6 Hz) (MPa).13/.18 (at 7 L/min).24 (at 23 L/min).32 (at 28 L/min) Rated flow Note 8) (5/6 Hz) (L/min) 7/7 23/28 Tank capacity (L) pprox. 5 etted parts material Stainless steel, Copper (Heat exchanger brazing), Bronze, lumina ceramic, Carbon, Polypropylene, PE, POM, FKM, EPDM, PVC Note 1) Temperature range ( C) 5 to 4 5 to 4 5 to 4 Pressure range (MPa).3 to.5.3 to.5.3 to.5 Required flow rate Note 12) (5/6 Hz) (L/min) Inlet-outlet pressure differential of facility water (MPa).3 or more.3 or more.3 or more etted parts material Stainless steel, Copper (Heat exchanger brazing), Bronze, Synthetic rubber Circulating fluid system Facility water system Electrical system 4.6/5.1.9/1. Scheduled for 211 Scheduled for 211 Single-phase 2 to 23 VC (5/6 Hz) llowable voltage range ±1% /5.2.9/1. 6/61 Thermo-chiller Series HRS 5.1/5.9 1./ /11 1.7/2.2 65/68 Fitting (for drain outlet) 1 pc. Note 13), Input/output signal connector 1 pc., connector 1 pc. Note 13), Operation manual (for installation/operation) 1, Quick manual (with a clear case) 1 Note 13), larm code list sticker 1, Ferritic core (for communication) 1 pc. Note 13) Note 1) For water-cooled Note 2) It should have no condensation. Note 3) If clear water is used, use water that conforms to ater Quality Standards of the Japan Refrigeration and ir Conditioning Industrial ssociation (JR GL cooling water system - circulating type - make-up water). Note 4) q temperature:, w Circulating fluid temperature: 2 C, e Rated circulating fluid flow rate, r Circulating fluid: Clear water, t Facility water temperature: Note 5) Use a 15% ethylene glycol aqueous solution if operating in a place where the circulating fluid temperature is 1 C or less. Note 6) Outlet temperature when the circulating fluid flow is rated flow, and the circulating fluid outlet and return port are directly connected. Installation environment and the power supply are within specification range and stable. Note 7) The capacity at the Thermo-chiller outlet when the circulating fluid temperature is 2 C. Note 8) Required flow rate for cooling capacity or maintaining the temperature stability. The specification of the cooling capacity and the temperature stability may not be satisfied if the flow rate is lower than the rated flow. Note 9) Purchase an earth leakage breaker with current sensitivity of 3 m separately. ( product with an optional earth leakage breaker (option B) is also available.) Note 1) Front: 1 m, height: 1 m, stable with no load, Other conditions Note 4) Note 11) eight in the dry state without circulating fluids Note 12) Required flow rate when a load for the cooling capacity is applied at a circulating fluid temperature of 2 C, and rated circulating fluid flow rate and facility water temperature of. Note 13) It is not provided for HRS5. 3

4 Series HRS Cooling Capacity HRS12--1/HRS12--1 (Single-phase 1/115 VC) temperature or facility water temperature temperature or facility water temperature C 4 C [5 Hz] [6 Hz] HRS18--1/HRS18--1 (Single-phase 1/115 VC) C 1 4 C 5 5 temperature or facility water temperature temperature or facility water temperature [5 Hz] [6 Hz] HRS12--2/HRS12--2 (Single-phase 2 to 23 VC) 25 temperature or facility water temperature 25 temperature or facility water temperature C 4 C [5 Hz] [6 Hz] HRS18--2/HRS18--2 (Single-phase 2 to 23 VC) C 1 4 C temperature or facility water temperature temperature or facility water temperature [5 Hz] [6 Hz] HRS24--2/HRS24--2 (Single-phase 2 to 23 VC) C 4 C temperature or facility water temperature [5 Hz] HRS [5 Hz] 4 C temperature temperature or facility water temperature [6 Hz] [6 Hz] 4 C temperature

5 Thermo-chiller Series HRS Heating Capacity HRS (Single-phase 1/115 VC) Heating capacity [] C 4 C 2 5 C [5 Hz] 4 45 Heating capacity [] C 4 C 2 5 C [6 Hz] 12 HRS (Single-phase 2 to 23 VC) 24 Heating capacity [] C 2 C [5 Hz] C Heating capacity [] C [6 Hz] C 4 C Pump Capacity HRS - -1 (Single-phase 1/115 VC) Lifting height [m] Return port Circulating fluid flow rate [LPM] Pressure [MPa] Outlet 6 [Hz] Outlet 5 [Hz] HRS (Single-phase 2 to 23 VC) Lifting height [m] Return port Circulating fluid flow rate [LPM] Pressure [MPa] Outlet 6 [Hz] Outlet 5 [Hz] HRS5--2 (Single-phase 2 to 23 VC) Lifting height [m] Pressure [MPa] Outlet 6 [Hz] Return port Outlet 6 [Hz] Circulating fluid flow rate [L/min] Required Facility ater Flow Rate 1 1 HRS12-- 2, HRS18-- 2, HRS HRS HRS HRS Facility water inlet temperature [ C] This is the facility water flow rate at the circulating fluid rated flow rate and the cooling capacity listed in the Cooling Capacity specifications. Facility water flow rate [L/min] 5

6 Series HRS Dimensions HRS12/18/24 Ventilation air inlet (ir-cooled only) (ir-cooled only) Circulating fluid fill port lid 377 Operation display panel Handle 5 (21) (35) Power switch Power entry 1 Circulating fluid return port Fluid level indicator 615 ater-cooled Facility water outlet Facility water inlet Dustproof filter Caster (unfixed) with locking lever Caster (unfixed) Drain port with O-ring sealing plug 2 Circulating fluid outlet 1 The power supply cable is not provided. (The power supply connector is provided.) 2 The conversion fitting (R3/8 male thread) is provided. HRS5 Ventilation air inlet Circulating fluid fill port lid 377 Operation display panel Fluid level indicator 592 Ventilation hole (Same for the opposite side) Serial communication (RS-485/RS-232C) connector D-sub female receptacle cable entry (Grommet with membrane) Maintenance connector Contact input/output communication connector al connector 1 al connector 2 Circulating fluid return port Handle (Same for the opposite side) Breaker Model no. label Circulating fluid outlet Dustproof filter Caster (unfixed) with locking lever Caster (unfixed) Drain port Rc1/4 (Valve stopper)

7 Global Manufacturing, Distribution and Service Network orldwide Subsidiaries North merica & South merica U.S.. SMC Corporation of merica CND SMC Pneumatics (Canada) Ltd. MEXICO SMC Corporation(México), S.. de C.V. BRZIL SMC Pneumãticos do Brasil Ltda. CHILE SMC Pneumatics (Chile) S.. COLOMBI SMC Colombia Sucursal de SMC Chile S.. RGENTIN SMC rgentina S.. BOLIVI SMC Pneumatics Bolivia S.r.l. VENEZUEL SMC Neumatica Venezuela S.. PERU (Distributor) IMPECO utomatización Industrial S..C. ECUDOR (Distributor) SSISTECH CI. LTD. sia/oceania CHIN SMC(China)Co.,Ltd. CHIN SMC Pneumatics (Guangzhou) Ltd. HONG KONG SMC Pneumatics(Hong Kong)Ltd. TIN SMC Pneumatics(Taiwan)Co.,Ltd. KORE SMC Pneumatics Korea Co., Ltd. SINGPORE SMC Pneumatics(S.E..)Pte.Ltd. MLYSI SMC Pneumatics(S.E..)Sdn.Bhd. THILND SMC (Thailand) Ltd. PHILIPPINES Shoketsu SMC Corporation INDI SMC Pneumatics(India)Pvt.Ltd. ISREL (Distributor) Baccara Geva.C.S. Ltd. INDONESI (Distributor) PT. Sinar Mutiara Cemerlang VIETNM (Distributor) Dy Dan Trading Co.,Ltd. PKISTN (Distributor) Jubilee Corporation U.S. & Canadian Sales Offices sia/oceania SRI LNK (Distributor) Electro-Serv(Pvt.)Ltd. IRN (Distributor) bzarchian Co. Ltd. U..E. (Distributor) Machinery People Trading Co. L.L.C. KUIT (Distributor) Esco Kuwait Equip & Petroleum pp. Est. SUDI RBI (Distributor) ssaggaff Trading Est. BHRIN (Distributor) Mohammed Jalal & Sons.L.L. Technical & utomative Services SYRI (Distributor) Miak Corporation JORDN (Distributor) tafawok Trading Est. BNGLDESH (Distributor) Chemie International USTRLI SMC Pneumatics(ustralia)Pty.Ltd. NE ZELND SMC Pneumatics(N.Z.)Ltd. JPN SMC Corporation Europe/frica GERMNY SMC Pneumatik GmbH SITZERLND SMC Pneumatik G U.K. SMC Pneumatics (U.K.) Ltd. FRNCE SMC Pneumatique S SPIN / PORTUGL SMC España S.. ITLY SMC Italia S.p.. GREECE SMC HELLS E.P.E IRELND SMC Pneumatics (Ireland) Ltd. NETHERLNDS (ssociated company) SMC Pneumatics BV BELGIUM (ssociated company) SMC Pneumatics N.V./S.. DENMRK SMC Pneumatik /S USTRI SMC Pneumatik GmbH (ustria) Europe/frica CZECH REPUBLIC SMC Industrial utomation CZ s.r.o. HUNGRY SMC Hungary Ipari utomatizálási Kft. POLND SMC Industrial utomation Polska Sp. z o.o. SLOVKI SMC Priemyselná utomatizácia Spol s.r.o. SLOVENI SMC Industrijska vtomatika d.o.o. BULGRI SMC Industrial utomation Bulgaria EOOD CROTI SMC Industrijska utomatika d.o.o. BOSNI ND HERZEGOVIN(Distributor).M. Pneumatik d.o.o. SERBI(Distributor) Best Pneumatics d.o.o. UKRINE(Distributor) PNEUMOTEC Corp. FINLND SMC Pneumatics Finland Oy NORY SMC Pneumatics Norway S SEDEN SMC Pneumatics Sweden B ESTONI SMC Pneumatics Estonia Oü LTVI SMC Pneumatics Latvia SI LITHUNI(LIETUV) UB SMC Pneumatics ROMNI SMC Romania S.r.l. RUSSI SMC Pneumatik LLC. KZKHSTN SMC Kazakhstan, LLC. TURKEY (Distributor) Entek Pnömatik Sanayi ve. Ticaret Şirketi MOROCCO (Distributor) Soraflex TUNISI (Distributor) Byms EGYPT (Distributor) Saadani Trading & Industrial Services NIGERI (Distributor) Faraday Engineering Company Ltd. SOUTH FRIC (Distributor) Hyflo Southern frica (Pty.) Ltd. EST ustin Dallas Los ngeles Phoenix Portland San Francisco Vancouver CENTRL Chicago Cincinnati Cleveland Detroit Indianapolis Milwaukee Minneapolis St. Louis Toronto indsor EST tlanta Birmingham Boston Charlotte Nashville New Jersey Richmond Rochester Tampa Montreal Vancouver Livemore Sales Branches Regional Distribution Centers Central warehouse SMC Corporation of merica 11 SMC Blvd., Noblesville, IN SMC Pneumatics (Canada) Ltd. (8) SMC.SMC1 ( ) sales@smcusa.com For International inquires: SMC Corporation of merica, ll Rights Reserved. ll reasonable efforts to ensure the accuracy of the information detailed in this catalog were made at the time of publishing. However, SMC can in no way warrant the information herein contained as specifications are subject to change without notice. OZ- 5M-PP ustin Chicago Indianapolis Detroit Toronto indsor tlanta Montreal Boston