DIMENSIONAL CATALOG. DWV - PVC PVC Drain, Waste & Vent Fittings
|
|
|
- Felix Weaver
- 7 years ago
- Views:
Transcription
1 DIMENSIONAL CATALOG DWV - PVC PVC Drain, Waste & Vent Fittings Updated
2 DWV PVC COUPLING B D ¼ 1/8 1 1/2 D ½ 1/8 1 1/2 D /8 1 5/8 D /4 3 1/4 D /4 3 3/4 D /4 6 1/4 D /16 9 5/16 D / /16 D / /8 FEMALE ADAPTER D ¼ 1/8 D ½ 1/4 D /4 D /8 D /8 D /16 PIPE INCREASER REDUCER N D x 1½ 2 1/8 1/2 D x 1½ 3 5/16 1 1/16 D x 2 3 3/16 7/8 D x /8 D x 3 4 1/4 15/16 D x 4 6 9/16 1 1/8 D x /16 2 7/16 D x D x / /16 D x /4 1 3/4 D x /8 2 3/4 D x /16 TRAP ADAPTER, MALE D ½ 3/16 D /16 D ½ x 1¼ 3/16 MALE ADAPTER D ¼ 1/4 D ½ 1/4 D /16 D /8 D /16 D ½ x ¼ 1/4
3 TRAP ADAPTER, MALE D ¼ 3/16 D ½ 3/16 D /16 D ½ x 1¼ 3/16 TRAP ADAPTER, MALE D ½ 3/16 D /16 D ½ x 1¼ 3/16 TRAP ADAPTER, FEMALE D ½ 1/4 D /16 D ½ x1¼ 1/4 TRAP ADAPTER, FEMALE D ¼ 1/8 D ½ 1/8 D /8 D ½ x 1¼ 3/16 TRAP ADAPTER, FEMALE D ½ 1/4 D /16 D ½ x 1¼ 1/4 FITTING CLEANOUT ADAPTER B D ¼ 3/16 1/2 D ½ 3/16 3/4 D /16 3/4 D /16 1 3/16 D /4 1 D /16 1 1/2 FITTING CLEANOUT ADAPTER + C.O. PLUG D ¼ 3/16 D ½ 3/16 D /16 D /16 D /16 D /16
4 CLEANOUT PLUG, RAISED NUT B D ¼ 1 1/2 D ½ 1 3/8 5/8 D /8 5/8 D /16 3/4 D /8 7/8 D D /16 1 3/8 CLEANOUT PLUG, FLUSH Diameter D /16 2 3/16 D /8 3 1/4 D /16 4 5/16 FLUSH BUSHING Part Number Size C D ½ x 1¼ 3/16 D x 1¼ 3/8 D x 1½ 5/16 D x 1½ 1 1/16 D x 2 15/16 D x 2 1 1/4 D x 3 1/2 D x /16 D x 4 3 1/4 D x /16 D * 10 x 3 4 3/8 D * 10 x 4 4 D x 6 2 3/8 D x 8 1 3/8 D * 12 x /16 D * 12 x 4 5 5/8 D * 12 x 6 4 1/8 D x 8 2 1/2 D x /16 *Assembled with two molded components FLUSH BUSHING Part Number Size C D x 1½ 3/16 CAP Part Number Size L S ½ 1 5/8 1 5/ /16 1 3/ /16 2 1/ /2 2 1/ /8 3 7/ /4 4 1/2 D /4 5 1/4 D /4 6 5/16
5 ADAPTER COUPLING D * 4 5/16 D x 3 11/16 *Assembled from two molded components ADAPTER BUSHING B D / /16 D /4 2 NO HUB ADAPTER D /4 D /16 D /8 HUB ADAPTER, CAST IRON SOIL PIPE D /16 D /8 D /2 HUB ADAPTER, CAST IRON SOIL PIPE D /4 D /8 D /16 HUB ADAPTER, CAST IRON SOIL PIPE INCREASER D x 1½ 3 1/2 D x 4 4 REPAIR COUPLING Part Number Size B D ½ 1 11/16 D /16 D /4 D /16 TEST CAP, INSERT TYPE D ½ 5/16 D /16 D /8 D /16
6 TEST CAP, PIPE D ½ 1/16 D /16 D /16 D /8 EXPANSION JOINT D * 1½ 5 5/8 D * 2 6 1/4 D * /16 D * 4 8 1/16 ***Install in neutral position. Fitting has 1" inch travel in each direction*** EXPANSION JOINT D ½ 4 7/16 D /8 D /8 D /16 1/4 BEND, STREET w/low HEEL INLET D x /16 4 3/8 1/4 BEND Part tnumber Size A D ¼ 1 1/2 D ½ 1 3/4 D /16 D /16 D /16 D /2 D /16 D D /4 1/4 BEND, w/side INLET D x 1½ 3 1/ /16 1 D x 2 3 1/ /16 1 1/4 BEND, STREET B D ¼ 1 9/16 2 1/4 D ½ 1 3/16 2 1/8 D /2 D /16 4 5/8 D /8 5 11/16 D /8 8 7/8 D / /16
7 1/4 BEND, w/low HEEL INLET B D * 3 x 1½ 3 43/4 D x /8 D x 2 3 7/8 5 7/16 *Assembled from two molded components LONG SWEEP 1/4 BEND D ½ 2 11/16 D /4 D /16 D LONG SWEEP 1/4 BEND w/low HEEL INLET B D x /16 LONG SWEEP 1/4 BEND, STREET B D ½ 2 3/4 3 7/16 D /4 4 3/16 D /16 D /8 6 3/4 1/6 BEND Part tnumber Size A D ½ 15/16 D /16 D /16 D /8 1/6 BEND, STREET B D ½ 1 13/4 D /16 2 3/16 D /16 3 3/16 D / /16 1/8 BEND D ½ 1 2/16 D /2 D /16 D /16 D /16 D /16 D /8 D /2
8 1/8 BEND, STREET B D ½ 1 2/ /16 D /2 2 7/16 D /16 3 3/8 D / /16 D /8 D /16 6 1/4 D /8 8 1/16 D /16 9 1/2 1/16 BEND D ½ 9/16 D /16 D /8 D D /2 D /16 D /16 1/16 BEND, STREET B D ½ 9/16 1 5/16 D /16 1 7/16 D /16 2 3/8 D /4 D /16 4 9/16 DOUBLE 1/4 BEND B D ½ 1 11/ /16 D /16 1 5/16 D /16 3 D x 1½ 1 15/16 2 1/8 1/32 BEND D /16 D /16 CLOSET BEND, REDUCING B D x 3 3 1/16 3 5/16 CLOSET BEND, REDUCING B D x 4 6 1/16 3 3/8
9 VENT ELL D ½ 1 1/8 D /2 D /16 D /16 D /2 D /2 D /16 D /16 VENT ELL, STREET B D ½ 1 1/8 1 7/8 D /2 2 3/8 D /8 3 3/4 D /16 5 1/16 D /16 7 1/16 D * /16 9 1/16 D * / /4 D / /16 SANITARY TEE B D ¼ 1 9/16 2 5/16 D ½ 1 11/ /16 D /4 3 5/8 D /8 4 7/8 D /16 6 3/16 D /16 9 D /2 SANITARY TEE, REDUCING D x 1½ x 1½ 2 1/8 3 3/ /16 D x 1½ x 2 2 1/4 3 5/8 2 5/16 D x 2 x 1½ 2 3/16 3 1/8 1 15/16 D x 3 x 1½ 2 1/2 2 5/8 1 3/4 D x 3 x /16 3 5/16 2 1/8 D x 4 x 2 3 1/4 3 1/4 2 1/8 D x 4 x 3 3 1/2 4 3/4 3 D x 6 x 4 4 3/ /16 D * 10 x 10 x 8 6 3/8 10 3/8 5 3/16 SANITARY TEE, STREET D ½ 1 11/16 3 7/16 2 7/16 D /4 4 9/16 3 3/16 D /16 4 5/8 D / /16
10 SANITARY TEE, STREET REDUCING D x 1½ x 1½ 2 1/8 4 1/8 2 13/16 D x 1½ x 2 2 1/4 4 9/16 3 3/16 D x 2 x 1½ 2 1/ /8 D x 3 x 1½ 2 1/2 4 1/8 3 1/4 D x 3 x /16 4 7/8 3 11/16 D x 4 x 2 3 1/4 4 15/16 3 3/4 SANITARY TEE w/left SIDE INLET D * 3 x 1½ 3 1/16 4 7/8 3 11/16 D x 2 3 1/16 4 7/8 3 11/16 D x 2 3 7/8 6 1/8 5 *Assembled from two molded parts SANITARY TEE w/right SIDE INLET D * 3 x 1½ 3 47/8 3 11/16 D x / /16 D x 2 37/8 6 1/8 5 *Assembled from two molded parts SANITARY TEE w/r & L SIDE INLET D x 1½ 3 413/ /16 D x / /16 D x 2 3 7/8 6 1/16 5 DOUBLE SANITARY TEE B D ½ 1 3/4 2 3/4 D /16 3 5/8 D /8 4 7/8 D /8 6 1/8 DOUBLE SANITARY TEE, REDUCING D x 1½ 2 1/8 3 1/8 2 D x 1½ 2 1/2 2 3/4 2 D x /16 3 1/4 2 3/16 D x 2 3 1/4 3 1/8 2 D x /16 3 DOUBLE SANITARY TEE, STREET D /16 6 3/8 4 9/16 D x 1½ 2 3/ /16 2 3/4 D x 3 x 2 x / /16 3 5/8
11 DOUBLE SANITARY TEE, w/side INLET D x1½ 3 1/16 4 7/8 3 11/16 D x 2 3 1/16 4 7/8 3 11/16 D x 2 3 7/8 6 1/8 5 *Assembled from two molded parts DOUBLE SANITARY TEE, w/r & L SIDE INLET D * 3x1½ 3 315/ /16 D x / /16 D x 2 3 7/8 6 1/16 5 *Assembled from two molded parts VENT TEE B D ½ 1 3/16 2 5/16 D /2 3 D / /16 D /16 5 3/16 D D /2 9 1/16 D /8 11 3/4 D REDUCING VENT TEE D x 10 x / /8 5 7/16 D x 10 x / /8 5 7/16 D x 10 x / /8 5 7/16 D x 12 x / /16 5 1/2 D x 12 x / /16 5 7/16 D x 12 x / /8 5 7/16 D * 12 x 12 x /2 14 1/16 7 *Fabricated CLEANOUT TEE + C.O. PLUG D ½ 1 15/16 2 3/8 1 1/8 D / /2 D /8 3 13/16 1 7/8 D / /2 D / /16 D /8 10 3/8 5 3/16 D x 8 5 3/ /8 6 5/16 D x / /4 5 3/16
12 CLEANOUT TEE D ½ 1 15/16 2 3/8 1 1/8 D / /2 D /8 3 13/16 1 7/8 D / /2 D / /16 D /8 10 1/2 5 3/16 D x 8 5 3/ /8 6 5/16 D x / /4 5 3/16 FLUSH CLEANOUT TEE (Test Tee) D X 2 2 1/ /2 D X 3 27/8 3 13/16 1 7/8 D X 4 315/ /2 TWO WAY CLEANOUT D D /16 COMBINATION WYE + 1/8 BEND LONG TURN D ½ 3 15/16 3 7/ /16 D /8 4 3/8 5 1/16 D /16 6 7/16 7 1/2 D / / /16 COMBINATION WYE + 1/8 BEND LONG TURN, REDUCING D x 1½ 4 1/8 3 7/16 3 7/8 D x1½ 4 1/8 3 7/16 3 7/8 D x 1½ 4 11/16 3 7/ /16 D x 2 5 5/8 4 7/16 5 1/16 D x 2 6 1/16 4 3/8 5 1/16 D x 3 7 7/8 6 1/2 7 1/2 COMBINATION WYE + 1/8 BEND (Two Piece) D ½ 3 5/ /8 D / /8 D /16 6 5/8 7 7/16 D /2 8 1/4 9 1/8 D / /4 11 3/8 D / /8 15 D /2 16 1/2 18 1/4 D /2 19 7/ /2
13 COMBINATION WYE + 1/8 BEND (Two Piece) D x 2 6 1/ /16 D x 3 8 3/8 6 5/8 7 3/4 D x /8 6 15/16 8 3/8 D x / /16 9 3/16 D x /2 10 7/ /16 D x 10 x / / /16 D x 10 x / / /16 D x 10 x 8 155/ / /16 D x 12 x / /16 12 D x 12 x 6 143/ / /16 D x 12 x / /16 16 D x 12 x / / /8 DOUBLE COMBINATION WYE + 1/8 BEND D /2 6 5/8 7 7/16 D /2 8 3/16 9 1/4 D x /16 6 1/16 D x 3 8 5/16 6 5/8 7 5/8 DOUBLE FIXTURE FITTING D /8 6 3/4 6 1/4 D x 1½ 2 3/4 3 1/2 3 3/16 D x 2 x 3 x 3 4 7/8 6 11/16 6 3/16 WYE D ½ 3 15/16 1 1/8 2 13/16 D /16 1 3/8 3 5/8 D /8 1 5/8 5 D /4 1 7/8 6 3/8 D /16 1 3/4 8 7/16 D /8 2 7/ /16 D /2 2 7/ /16 D /16 3 7/ /16 WYE, REDUCING D x 1½ x 1½ 3 7/8 1 1/8 2 7/8 D x 2 x 1½ 4 3/ /16 D x 3 x 1½ 4 3/16 1/2 4 1/4 D x 3 x 2 5 7/8 4 5/8 D x 4 x 2 5 3/8 5 9/16 D x 4 x /16 1 1/8 6 D x 6 x 3 6 7/8 3/ /16 D x 6 x 4 6 7/8 1/4 7 7/16 D x 8 x /16 3/8 8 5/8 D x 8 x /16 15/16 9 3/4 D x 10 x /16 1/4 10 7/16 D x 10 x /16 1/4 11 1/2 D x 10 x /16 1 1/4 13 1/16 D x 12 x /16 3/ /16 D x 12 x /16 13/16 13 D x 12 x /16 1 7/8 13 7/8 D x 12 x / / /16 WYE, STREET
14 D ½ 4 1/ /8 D /16 3 5/8 D / D /8 3 1/2 6 3/8 WYE, STREET, REDUCING D x 3 x 1½ 4 3/ /4 D x 3 x 2 5 3/16 2 5/8 4 5/8 D x 4 x 2 5 1/16 2 3/16 5 9/16 D x 4 x 3 8 7/ /16 6 UPRIGHT COMBINATION WYE & 1/8 BEND (Two PC) D /4 4 15/16 7 1/8 D /8 6 5/8 9 1/8 D /8 16 1/2 21 5/16 D /8 19 7/16 25 LARGE DIAMETER REDUCING UPRIGHT COMBINATION WYE & 1/8 BEND (Two PC) D x 10 x / / /8 D x 10 x / / /16 D x 10 x / / /8 D x 12 x / / /16 D x 12 x 6 123/ / /8 D x 12 x 8 141/ /16 18 D x 12 x / / /16 REDUCING UPRIGHT COMBINATION WYE & 1/8 BEND (Two PC) D x 2 x 1½ 3 3/4 4 5/ /16 D x / /16 DOUBLE COTTAGE WYE w/2 INLET D /8 1 5/8 5 D /4 1 7/8 6 3/8 DOUBLE WYE D ½ 4 11/8 2 13/16 D /16 1 3/8 3 5/8 D /16 1 5/8 5 D /4 1 7/8 6 3/8 D /8 1 3/4 8 7/16
15 DOUBLE WYE, REDUCING D x1½ 4 5/8 1 1/8 3 7/16 D x 1½ 4 3/16 1/2 4 5/16 D x 2 5 7/8 4 5/8 D x 2 51/4 7/16 5 9/16 D x 3 6 5/8 1 1/8 5 15/16 D x 4 6 7/8 1/4 7 7/16 COTTAGE WYE, LH INLET D E D /8 1 5/8 4 15/16 2 1/4 1 3/4 D /4 1 7/8 6 3/8 2 1/2 2 3/16 COTTAGE WYE, RH INLET D E D /8 1 5/8 4 15/16 2 1/4 1 3/4 D /4 1 7/8 6 3/8 2 1/2 2 3/16 RETURN BEND D ½ 3 1/2 1 1/2 1 1/2 D /16 2 3/8 2 3/8 D /4 2 15/ /16 D /16 3 5/8 3 5/8 P TRAP Part tnumber Size A B C D ½ 4 7/8 3 7/8 1 1/2 D /16 5 1/8 2 3/8 D /8 6 5/8 2 15/16 D /8 8 11/16 3 5/8 P TRAP, LOW PROFILE D ½ 4 5/8 3 3/8 1 1/2 D /16 4 1/2 2 3/8 P TRAP w/cleanout D ½ 4 11/ /16 1 7/16 D /16 4 5/8 2 3/8 P TRAP, UNION D ½ 4 7/8 3 7/8 1 1/2 D /16 5 1/8 2 3/8
16 LA PATTERN P TRAP D ½ 4 15/16 3 7/8 3 3/4 D ½ x 1¼ 4 7/8 3 7/8 3 3/8 DRUM TRAP B D x 6 x 1½ 4 9/ /16 CLOSET FLANGE (One Piece) D /16 D x /16 7/16 CLOSET FLANGE (One Piece) D D / /16 7/16 D x /4 1 9/16 7/16 CLOSET FLANGE w/knock OUT (One Piece) D x /16 7/16 CLOSET FLANGE, ADJUSTABLE w/metal RING D /16 CLOSET FLANGE, ADJUSTABLE w/metal RING D x3 7 11/4 5/16 CLOSET FLANGE, ADJUSTABLE w/metal RING D /8 5/16 D x3 7 23/4 5/16 FLUSH CLOSET FLANGE w/knock OUT D x /16 7/16 OFFSET CLOSET FLANGE D E D w/plastic Ring 4x /4 7/16 1 5/8 2 1/8
17 OFFSET CLOSET FLANGE D E D w/metal Ring 4x /16 5/ /16 2 3/8
18 Headquarters 414 Morgan Street P.O. Box 116 Brownsville, TN Fax: Service Centers 5700 East 39th Avenue Denver, CO Fax: Carmenita Road, Unit B Norwalk, CA Fax: Beaudin Blvd, Suite 600 Woodridge, IL Fax: Kingspointe Parkway, Suite 400 Orlando, FL Fax: Kelly Blvd., Suite 13/X30 Carrollton, TX Fax: Lasley Avenue Wilkes Barre, PA Fax: Limited Warranty LASCO Fittings, Inc. products are warranted to be free from manufacturing defects in materials and workmanship. They are warranted against rot, rust, and electrolytic corrosion for a period of three years from date of installation. If LASCO products prove defective due to manufacturing defects in material or workmanship during that period, the manufacturer will provide new replacement units of the same type and size. No remedy will be granted under this warranty if LASCO products are not used strictly in accordance with LASCO s directions with respect to use and storage or if the products have been modifi ed in any way. THE MANUFACTURER S LIABILITY UNDER EXPRESSED OR IMPLIED WARRANTY OR FOR ANY REASON IS LIMITED TO FURNISHING REPLACE- MENT UNITS OR GRANTING A CREDIT FOR DEFECTIVE UNITS. NO LABOR EXPENSE OR CONSEQUENTIAL DAMAGES WILL BE PAID BY LASCO. THIS WARRANTY IS IN LIEU OF ALL OTHER GUARANTEES AND WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE, EXCEPT FOR ANY WARRANTIES IMPLIED BY LAW FOR NONCOMMERCIAL CONSUMERS. ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. DO NOT USE LASCO FITTINGS FOR COMPRESSED AIR OR GASES. DO NOT TEST PVC PIPING SYSTEMS WITH COMPRESSED AIR OR GASES. DO NOT USE FITTINGS WITH LIQUIDS NOT RECOMMENDED BY LASCO. MODIFICATIONS OF FITTINGS VOIDS THE WARRANTY. STANDARDS AND SPECIFICATIONS DWV-PVC ASTM D-2665 Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings. ASTM D-1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. ASTM D-3311 Drain, Waste, and Vent (DWV) Plastic Fittings Patterns MATERIAL LASCO DWV Fittings are produced from PVC Type I, Cell Classification B. PVC Fittings are listed by NSF (National Sanitation Foundation). Product is certifi ed to the Uniform Plumbing Code South 228th Street Kent, WA Fax: Please visit our website: DWV-DC-0
ABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661
ABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 2.60 1 1/2" 601120 125 9,000 1.74 2" 601138 100 4,800 2.34 3" 601146 45 1,440 6.57 4" 601153 25 800
Residential Commercial
& Residential Commercial Irrigation Products Catalog Current Pricing LASCO SWIVEL JOINTS First Digit Base Part Number Tor R Step 1 Step 2 Step 3 - Step 4 Step Step Specify Standard or Regulated Swivel
Plumbing Lesson Five: Pipe Fittings and Parts. Facilitator Guide
Lesson Five: Pipe Fittings and Parts Facilitator Guide Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
PLUMBING ROUGH IN INSPECTION
This Program is made Possible through the Code Officials Education & Training Fund. Revenue for the Fund comes from Assessments on Building Permits. Please turn down cell phones and put pagers on vibrate.
ENGINEERED SOLUTIONS. A2 Liner Pipe for Trenchless Technology
ENGINEERED SOLUTIONS A2 Liner Pipe for Trenchless Technology A2 Liner Pipe Restores Deteriorated Sewers Cost-Effective Rehabilitation The increasing rate of sanitary and storm sewer deterioration requires
Plumbing Lesson Five: Pipe Fittings and Parts. Student Handouts
Lesson Five: Pipe Fittings and Parts Student Handouts Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
SERVICE LINE EXTENSION AND SERVICE LINE CONNECTION CONDENSED SANITARY SEWER SYSTEM INSTALLATION SPECIFICATIONS
1001 SOUTH LEECHBURG HILL LEECHBURG, PA 15656 Phone: 724-845-9355 Fax: 724-845-1186 SERVICE LINE EXTENSION AND SERVICE LINE CONNECTION CONDENSED SANITARY SEWER SYSTEM INSTALLATION SPECIFICATIONS 1. General
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀 眀 眀 眀 最 攀 渀 漀 瘀 愀 瀀 爀 漀 搀 甀 挀 琀 猀 挀 漀 洀 㠀 ⴀ 㔀 ⴀ 㜀 㐀 㠀 㠀 September 2015 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan
LIST PRICE BOOK MALLEABLE CAST IRON PRESS FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL PIPE
FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL
SUBMITTAL 10 FEET. Cast Iron Soil Pipe Products Hubless Pipe & Fittings HUBLESS PIPE 10 FEET*
QUALITY SYSTEM SUBMITTAL Hubless Pipe & Fittings R E G I S T R AT I O N Manufacturer s T J B 10 FEET HUBLESS PIPE 10 FEET* NOM. SIZE B INSIDE DIAMETER J OUTSIDE DIAMETER 1 1/2 1.50 1.90 0.16 0.13 28.4
Plastics TECHNICAL AND INSTALLATION MANUAL. (Updated June 10, 2016) TECHNICAL MANUAL TM-PL. 2001-2016 Charlotte Pipe and Foundry Co.
Plastics TECHNICAL AND INSTALLATION MANUAL ABS DWV ABS Plus Foam Core PVC DWV RePVC DWV Pipe with Recycled Content PVC Sewer & Pressure Pipe PVC Schedule 40 & 80 FlowGuard Gold CTS CPVC ReUze CTS CPVC
Top 10+ Mistakes of DWV plumbing design
Top 10+ Mistakes of DWV plumbing design Listed below are the some of the most frequently missed items, noticed by our inspectors, at plumbing rough-in when non-plumbers attempt plumbing design. Most of
PVC Pipe PVC SCHEDULE 40. Nominal Pipe Size (in.) 1/8. Average I.D. O.D.
CONDENSED CATALOG PVC HPB-0-A Effective 9//97 Revised //99 CLEAR / / / / -/ -/ -/ x/ CLEAR / / / / -/ PVC SDR. PSI (Water @ 7. F.) /.0.9.0.0 PVC SDR -/ -/ -/ 0 0 PVC SCHEDULE 0.0.7.0.00..7.7.00.000.00...
Product Knowledge Guide. (Updated May 2015) BR-PK 2004-2015 Charlotte Pipe and Foundry Company.
Product Knowledge Guide (Updated May 2015) BR-PK 2004-2015 Charlotte Pipe and Foundry Company. You can t beat the system. Charlotte Pipe s Retail Division Charlotte Pipe and Foundry Company is the largest
When Should Examination Preparation Begin?
Texas State Board of Plumbing Examiners Tradesman Plumber-Limited Licensee Examination Review Course The following Examination Review Course is designed to assist a registered Plumber s Apprentice in preparing
MASTER. Installation and Operation Manual. Water Conditioning Corp. MCA Time Clock Series Residential Softeners. February 2011 Version
MASTER Water Conditioning Corp. Installation and Operation Manual MCA Time Clock Series Residential Softeners February 2011 Version Table of Contents Page No. Topic Description 1 Model # and Packaging
SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL
SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL PART 1 - GENERAL 1.1 WORK INCLUDED IN THIS SECTION A. The WORK of this Section includes the repair, demolition, and disposal of asbestos
2006 Codes. Please verify the following before calling for inspection
INSPECTION CHECKLIST RESIDENTIAL PLUMBING ROUGH IN 2006 Codes This checklist is intended for use to prepare for an inspection. This is only a general list and is not intended to address all possible conditions.
MBA-MM-1040/10/13/1665 MULTI MEDIA FILTERS
MASTER Water Conditioning Corp. www.masterwater.com Installation and Operation Manual MBA-MM-1040/10/13/1665 MULTI MEDIA FILTERS with the 263/742 Logix Control Valve June 2010 Table of Contents Page No.
San Antonio Water System Standard Specifications for Construction ITEM NO. 854 SANITARY SEWER LATERALS
San Antonio Water System Standard Specifications for Construction ITEM NO. 854 SANITARY SEWER LATERALS 854.1 DESCRIPTION: This item shall govern sanitary sewer laterals installed in accordance with these
Why Do I Have Sewer Smells In My Home or Business?
Why Do I Have Sewer Smells In My Home or Business? Before we discuss why you may be getting smells through your drain pipes, lets first take a look at how your plumbing is supposed to work. Properly constructed
HERNDON/MUNCEY, INC. Office: (281) 579-0515 INVESTIGATIVE PLUMBING
HERNDON/MUNCEY, INC. Office: (281) 579-0515 INVESTIGATIVE PLUMBING Fax: (281) 579-1960 February 21, 2014 INVOICE NO.: HR18831 TIN: 76-0462307 1 STATIC TEST $350.00 1 HYDROSTATIC $125.00 PAID MASTER CARD
A. This Section includes the following for soil, waste, and vent piping inside the building:
June 2014, Draft 01 22 1316 Sanitary and Waste Vent Piping PART 1. GENERAL 1.01 Summary A. This Section includes the following for soil, waste, and vent piping inside the building: 1. Pipe, tube, and fittings.
LS 2540 SEWER LATERALS AND INSPECTION TEES
LS 2540 SEWER LATERALS AND INSPECTION TEES A. Summary B. Submittals C. Site Information D. Sewer Pipe and Fittings E. Lateral Locations F. Lateral Installation G. Inspection Tee Installation H. Removal
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Plumbing. Helpful Hints Residential Construction. Lincoln County. Bert Polk Plumbing Inspector
Plumbing Helpful Hints Residential Construction Bert Polk Plumbing Inspector Lincoln County 2015 Waste and vent fittings Vent 90 medium 90 long 90 1/16 bend,1/8 bend,1/6 bend, medium 90 san tee combination
INDEX. Sec. No. Items Page Nos.
INDEX Sec. No. Items Page Nos. 1. Types of Pipe............... MSSP- 2 2. Concrete Pipe............... MSSP- 2 thru MSSP-3 3. ABS and PVC Truss Pipe............... MSSP- 3 4. ABS and PVC Solid Wall Pipe...............
Sewage Compliance Form Instructions
CITY OF JOHNSTOWN DEPARTMENT OF COMMUNITY & ECONOMIC DEVELOPMENT 401 MAIN STREET ROOM 200 JOHNSTOWN, PA 15901 814-533-2017 FAX 814-539-5816 RENEE K. DALY DIRECTOR Sewage Compliance Form Instructions 1)
SECTION 221413 FACILITY STORM DRAINAGE PIPING
SECTION 221413 FACILITY STORM DRAINAGE PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
Chapter 7 Plumbing Connections
Chapter 7 Plumbing Connections 7-1 General All plumbing equipment and installations must be designed, constructed, and installed in accordance with this code and where not specific, to the applicable provisions
USE &CARE GUIDE. Remote Faucet Pump System. See Important Safeguards on page 2
Remote Faucet Pump System USE &CARE GUIDE See Important Safeguards on page 2 An exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance
IMPORT CAST IRON THREADED FITTINGS Price Sheet SPF.CI-3.14C Effective March 10, 2014 Cancels Price Sheet SPF.CI-7.12C of July 2, 2012
IMPORT CAST IRON THREADED FITTINGS Price Sheet SPF.CI-3.14C Effective March 10, 2014 Cancels Price Sheet SPF.CI-7.12C of July 2, 2012 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS,
SECTION 02400 - STORM DRAIN SYSTEM
SECTION 02400 - STORM DRAIN SYSTEM CONTENTS: Part 1 - General... 1 1.01 Work Included... 1 1.02 Related Requirements... 1 1.03 Reference Standards... 1 1.04 Quality Assurance... 1 1.05 Measurement And
Jay R. Smith Mfg. Co.
Jay R. Smith Mfg. Co. Automatic Backwater Valve SMITH CUSTOMER DRIVEN FLOOD-GATE FEATURES Index Page Flood-Gate Features and Applications 2 How Flood-Gate Works 3 Flood-Gate Operation & Approvals 4 Valve
SECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org HDPE
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
DESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 33 UTILITIES 33 00 00 SITE UTILITIES
SECTION INCLUDES Domestic Water Fire Water Service Water Well Sanitary Sewer Storm Drains Foundation Drainage RELATED SECTIONS 03 30 00 Concrete 21 00 00 Fire Suppression - Sprinklers 22 00 00 Plumbing
PARTS CATALOG RPPCR01111_Front_Backcx.indd 1 RPPCR01111_Front_Backcx.indd 1 11/21/11 1:41 PM 11/21/11 1:41 PM
PARTS CATALOG RPPCR01111_Front_Backcx.indd 1 11/21/11 1:41 PM RELIANCE Has Everything Your Customers Need to Do the Job Right! Reliance Water Heater Company was founded in 1981 to provide a water heater
Sewer Water Pipeline Replacement with CERTA LOK RESTRAINED JOINT PVC PIPE
1.0 GENERAL 1.1 DESCRIPTION This section addresses the procedures to be employed for pipe bursting existing water/sewer pipelines, as identified on the drawings, and replacing with new Restrained Joint
CONSTRUCTION CHECKLIST Residential Plumbing Rough-In September 2004
Bellevue Bothell Kenmore Kirkland Issaquah Mercer Island Sammamish Snoqualmie Woodinville CONSTRUCTION CHECKLIST Residential Plumbing Rough-In September 2004 This checklist is intended for use to prepare
SUBDRAINS AND FOOTING DRAIN COLLECTORS. A. Construct subdrains, subdrain cleanouts and outlets, and footing drain collectors.
SUBDRAINS AND FOOTING DRAIN COLLECTORS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Subdrains B. Subdrain Cleanouts and Outlets C. Footing Drain Collectors D. Storm Sewer Service and Connections 1.02 DESCRIPTION
Series 4000 Fiberglass Pipe and Fittings
Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service Uses and applications Listings Performance Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing
SECTION LS 2530 SANITARY SEWERS. A. General: Submit the following in accordance with The General Conditions.
SECTION LS 2530 SANITARY SEWERS PART 1 GENERAL 1.1 SUBMITTALS A. General: Submit the following in accordance with The General Conditions. 1. Product data for drainage piping specialties. 2. Shop drawings
Price List January 1, 2015
Price List January 1, 2015 Cement Lined Price List Certification and General Installation Certification All Ductile Iron Spooling manufactured by is made in accordance with current ANSI/AWWA- C115/A21.15
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER 1.800.591.9360 TECHNICAL ASSISTANCE FAX: 1.626.855.4894
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 9744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FREEZE RESISTANT WALL MOUNTED EMERGENCY EYEWASH
Instructions. Complete RPS 2900 Pump Kit for RoadLazer RoadPak Line Striping System 3A1304A ENG. Pressure Relief Procedure.
Instructions Complete RPS 2900 Pump Kit for RoadLazer RoadPak Line Striping System 3A1304A ENG Model 24G766 Important Safety Instructions For complete warnings and safety instructions see RoadLazer RoadPak
Understanding and Designing Plumbing Systems
Lesson A3 15 Understanding and Designing Plumbing Systems Unit A. Mechanical Systems and Technology Problem Area 3. Construction Systems Lesson 15. Understanding and Designing Plumbing Systems New Mexico
Installation Instructions
Installation Instructions E19-120 (Plastic showerhead) E19-120A (Stainless steel showerhead) E19-120SS (All Stainless Steel) Drench Shower - Horizontal Supply Table of Contents Pre-Installation Information..........................2.............................3
Installation and Maintenance Instructions
Installation and Maintenance Instructions Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship
Installation Manual DIAPHRAGM WELL TANK
Installation Manual DIAPHRAGM WELL TANK Safety Instructions Installation Warranty IN-LINE SERIES: 2-5 & 7 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON VERTICAL SERIES: 14-20-32-36-52-86-96-119 GALLON KEEP
CHAPTER 9 VENTS. copper drainage tube Type DWV, Schedule 40 plastic piping, or borosilicate glass.
CHAPTER 9 VENTS 901 GENERAL 901.1 Scope The provisions of this chapter shall govern the materials, design, construction, and installation of vents. 901.2 Protection of Trap Seals The protection of trap
Installation Manual DIAPHRAGM WELL TANK
Installation Manual DIAPHRAGM WELL TANK IN-LINE SERIES: 2-5 & 7 GALLON VERTICAL SERIES: 14-20-25-32-36-52-65-86-96-119 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON NO LEAD NO LEAD: The weighted average of
DRAIN, WASTE AND VENT PLUMBING
Flow of waste in a drain system Solid and liquid waste flows in vertical pipes much differently than it does in horizontal systems. In near horizontal pipes we talked about maintaining the slope of the
FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM
CTS COPPER SYSTEM Price Sheet GR.CTS-5.14 Effective Date: May 12, 2014 Cancels Price Sheet GR.CTS-5.13 of May 28, 2013 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
Section 10. Contain-It Secondary Containment Piping System. Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Section 10 ontain-it Secondary ontainment Piping System Glossary S = ontain-it Socket SPG = Spigot End (same dimension as pipe outside diameter) MPT = Male Pipe Thread FPT = Female Pipe Thread Product
Copper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
INSPECTION CHECKLIST Residential Plumbing Rough In April 2011 Mercer Island Mill Creek Sammamish Snohomish County Snoqualmie Woodinville
Bellevue Bothell Burien Issaquah Kenmore Kirkland INSPECTION CHECKLIST Residential Plumbing Rough In April 2011 Mercer Island Mill Creek Sammamish Snohomish County Snoqualmie Woodinville 2009 Codes This
NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
FORGED CARBON STEEL FITTINGS & FORGED STEEL UNIONS Screwed and Socket Welding Price Sheet CSF-4.11 Effective: April 18, 2011 Cancels Price Sheet CSF-1.09 & U-1.09 of January 26, 2009 FOR THE MOST CURRENT
Whole House Water Treatment System. Installation, Operation and Maintenance Manual. Multi-Pure Model TO15000
Multi-Pure Whole House Water Treatment System Installation, Operation and Maintenance Manual Multi-Pure Model TO15000 Warning Please read manual carefully before proceeding with installation. It is recommended
PMA ONLINE TRAINING Venting for Plumbing Systems
PMA ONLINE TRAINING Venting for Plumbing Systems One Hour Continuing Education Venting PMA training disclaimer The information provided in this document is intended for use as a guideline and is not intended
INSTALLATION INSTRUCTIONS. SharkBite. Connection System. The SharkBite System
INSTALLATION INSTRUCTIONS SharkBite Connection System The SharkBite System The SharkBite connection system uses an advanced push-fit design that works in two stages. When the tube is inserted into the
Sip/Puff Switch User Guide
Sip/Puff Switch User Guide www.orin.com Table of Contents Table of Contents... 2 Legal Notices... 3 Declaration of Conformity with European Directives... 3 Application Disclaimer... 4 Introduction... 5
PROTECTO 401 Price List
Price List January 1, 2015 Protecto 401 Price List Certification and General Installation Certification All Ductile Iron Spooling manufactured by is made in accordance with current ANSI/AWWA- C115/A21.15
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR. Installation and Operation Manual
DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR Installation and Operation Manual 1 ENGLISH Safety Instructions 2 Features 2-3 Specifications 3 Installation 4-5 Wiring Diagrams 6-7 Warranty 8
Hommage 2 PIECE WATER CLOSET BOWL MODEL 6662 10 TANK MODEL 7721 U1 SEAT MODEL 8809 61
Hommage 2 PIECE WATER CLOSET BOWL MODEL 6662 10 TANK MODEL 7721 U1 SEAT MODEL 8809 61 HOMMAGE - 2 PIECE WATER CLOSET The Company Creativity, inventiveness and entrepreneurial far-sightedness have been
Plumbing Code in Commercial Kitchens. NH BOA May 9, 2012
Plumbing Code in Commercial Kitchens NH BOA May 9, 2012 Main Topics Grease Interceptors Indirect Waste Receptors Cleaning Chemical Dispensers Thermal Expansion IPC - Chapter 10 Traps Interceptors Separators
ALL THREAD ROD Price Sheet ATR-6.16 Effective: June 13, 2016 Cancels Price Sheet ATR-5.14 of May 12, 2014
ALL THREAD ROD Price Sheet ATR-6.16 Effective: June 13, 2016 Cancels Price Sheet ATR-5.14 of May 12, 2014 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE
Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer
Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve
Newloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
Carriers, Fixtures & Piping
Regardless of application and/or installation needs, there are fixture supports available to meet even the harshest design requirements. by William M. Smith Over the years, I m sure that each of you in
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE PART 1: GENERAL 1.01 SECTION INCLUDES PVC pressure pipe and fabricated fittings in nominal sizes 4-inches through 12-inches with cast iron pipe equivalent
32-02.05 Precast Manhole Sections and Castings. These items shall conform to Section 31, "Storm Drain Installation," of these Standard Provisions.
SECTION 32: SANITARY SEWER INSTALLATION 32-01 SCOPE. The Work shall consist of furnishing and installing sewer mains, manholes, laterals, cleanout fittings and appurtenances; and testing, flushing and
PVC Pipe Restriction Law and Legislation 1) NYS PVC Pipe Restriction Law (Repealed)
PVC Pipe Restriction Law and Legislation 1) NYS PVC Pipe Restriction Law (Repealed) * 246. Uses of standard piping materials. 1. Building sewers under public ways. Building sewers under public ways shall
Town House 11265 Center Highway North Huntingdon, PA 15642
APPENDIX C SPECIFICATIONS FOR THE CONSTRUCTION OF BUILDING LATERAL SANITARY SEWERS DECEMBER 2004, INCLUDING AMENDMENTS ADOPTED ON FEBRUARY 6, 2008 AND APRIL 2, 2008; EFFECTIVE ON MAY 1, 2008 Town House
VERIFICATION TESTING GUIDELINES FOR CONTRACTORS
Public Works Department Engineering Division VERIFICATION TESTING GUIDELINES FOR CONTRACTORS CITY OF BERKELEY PRIVATE SEWER LATERAL ORDINANCE BMC Chapter 17.24 Effective November 3, 2014 A consent decree
SMITH MFG. CO. PROTECT YOUR INVESTMENTS. Automatic Backwater Valve SMITH MORRIS GROUP INTERNATIONAL. www.morrisgroup.co
SMITH R SMITH MFG. CO. R MEMBER OF MORRIS GROUP INTERNATIONAL CUSTOMER DRIVEN SINCE 1926 MORRIS GROUP INTERNATIONAL www.morrisgroup.co Index Page FLOOD-GATE FEATURES Flood-Gate Features and Applications
Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques
Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques Schedule 40 Rigid PVC Piping Systems SCHEDULE 40 - DIMENSIONS Harvel
MASTER. Water Conditioning Corp. MBA-10/13 FILTERS with the 253/742 Logix Control Valve. Installation and Operation Manual. www.masterwater.
MASTER Water Conditioning Corp. www.masterwater.com Installation and Operation Manual MBA-10/13 FILTERS with the 253/742 Logix Control Valve June 2010 Table of Contents Page No. Topic Description 1 Model
EFFECTIVE FEBRUARY 2014. note: drainage permit required to call for a dampproof inspection
EFFECTIVE FEBRUARY 2014 note: drainage permit required to call for a dampproof inspection 1. ROOF DRAINS/DECK DRAINS (INTERIOR ) All roof and deck drains within the perimeter of the building shall be APPROVED
Installation Instructions
PUSH Installation Instructions A DA C O M PLIA NT shown with optional Bradley 90-75 faucet Front-Mounted Barrier Free Rectangular Bowl Stainless Steel Lav Table of Contents Pre-Installation Information...........2
Storm Drainage Structures
Storm Drainage Structures Tomorrow s Drainage System Today A DIVISION OF ADVANCED DRAINAGE SYSTEMS, INC. ADVANCED DRAINAGE SYSTEMS, INC. The Preferred Solution for Storm Drainage Applications. About Nyloplast-ADS
CHAPTER 11 STORM DRAINAGE
CHAPTER STORM DRAINAGE SECTION PC 0 GENERAL 0. Scope. The provisions of this chapter shall govern the materials, design, construction and installation of storm drainage. Storm water discharge shall be
Teacher Assessment Blueprint. Plumbing. Test Code: 5175 / Version: 01. Copyright 2010 NOCTI. All Rights Reserved.
Teacher Assessment Blueprint Plumbing Test Code: 5175 / Version: 01 Copyright 2010 NOCTI. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
Jefferson County, Alabama Environmental Services Department. Standard Specifications for Sanitary Sewer Service Lines and Connections
Jefferson County, Alabama Environmental Services Department Standard Specifications for Sanitary Sewer Service Lines and Connections Adopted November 10, 1999 Amended May 6, 2008 & November 6, 2012 Jefferson
Plumbing Installations. A homeowner guide to the City of Winnipeg plumbing requirements for a single-family dwelling
Plumbing Installations A homeowner guide to the City of Winnipeg plumbing requirements for a single-family dwelling February 2001 contents General Information 3 Inspection 4 New Drain and Vent Installations
Amendments to the 2012 International Plumbing Code
Amendments to the 2012 International Plumbing Code North Central Texas Council of Governments region The following sections, paragraphs, and sentences of the 2012 International Plumbing Code are hereby
MASTER. Water Conditioning Corp. MP-MBA-15T-30T using the 255/762 Logix Control Valve. Installation and Operation Manual. www.masterwater.
MASTER Water Conditioning Corp. www.masterwater.com Installation and Operation Manual MP-MBA-15T-30T using the 255/762 Logix Control Valve July 2006 Table of Contents Page No. Topic Description 1 Model
SOIL & SEWER FITTINGS NO-HUB SOIL PIPE & FITTINGS NO-HUB SOIL PIPE LESS COUPLING
January 27, 2011-1 SOIL & SEWER FITTINGS NO-HUB SOIL PIPE & FITTINGS NO-HUB SOIL PIPE LESS COUPLING SSC No. Manuf No. Pipe Size Pipe Length Price Each Lgth Price Per 100' 26C 0010 0156 1 1 /2" 10' $ 75.09
Propane Conversion Kit PROPANE CONVERSION KIT INSTALLATION MANUAL
Propane Conversion Kit Supersedes: 145.25-IOM2 (708) Form 145.25-IOM2 (908) PROPANE CONVERSION KIT INSTALLATION MANUAL "LPKIT " - PROPANE CONVERSION KIT Kits are available for field conversion from natural
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
01 - Plastic Pipe Cements and Primers
01 - Plastic Pipe Cements and Primers Q - What is the shelf life of the cement and primers? PVC & ABS Cements / Primers and Cleaners have 3 year shelf life from date of manufacture, and CPVC has 2 year
Value Engineering Considerations for Cast Iron Soil Pipe and PVC in Commercial Sanitary and Storm Drainage Applications
Value Engineering Considerations for Cast Iron Soil Pipe and PVC in Commercial Sanitary and Storm Drainage Applications BR-VEC (2-14-13) The Correct Material for the Correct Application Plumbing design
SAVARD PLUMBING COMPANY
Now includes our LEAD FREE * product offering SAVARD PLUMBING COMPANY PRICE LIST Effective March 30, 2015 Braided Stainless Steel and PVC Faucet Washing Machine Dishwasher Water Heater Toilet Ice Maker
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This