Volvo Materials Technology Gothenburg Lab
|
|
- Solomon Ferguson
- 7 years ago
- Views:
Transcription
1 Volvo Materials Technology Gothenburg Lab Group BF Metallic Materials Ulla Boman - Manager Metallic Materials Telephone: address: ulla.boman@volvo.com Rasha Alkaisee Telephone: address: rasha.alkaisee@volvo.com Residual stress measurements by XRD, Shot peening, Steel Pusher and front axles, Axle stubs, Valve springs, Drive shafts, Gears Ingemar Bertilsson Telephone: address: Ingemar.bertilsson@volvo.com Cast aluminum, Magnesium, (grey iron) Aluminum Pistons, Cylinder Liners Responsibility: Material Courses Madeleine Blad Telephone: address: madeleine.blad@volvo.com Cast aluminum, Wrought aluminum, Rheo/Thixo Casting Cylinder heads and blocks, Brackets, Housings, Brake discs Responsibility: Scanning Electron Microscopy & Energy Dispersive X-ray Spectroscopy Carolina Wahlberg Telephone: address: carolina.wahlberg@volvo.com Surface treatment, Nitrocarburizing, Corrosion
2 Johan Eriksson Telephone: address: Grey iron, CGI, Nodular iron, Databases, Image analysis Cylinder- blocks and heads Jonas Höijer Telephone: address: Forged components, Heat treatment. Crankshafts, Connecting rods, Bearings. Daniel Kihlbaum Telephone: address: Forged components, Precipitation hardened steels, Springs (leaf & helical), SiMo Steering arms, Axles, Valve springs, Exhaust manifolds Cutting equipment, VMT Webpage Niklas Köppen Telephone: address: Cast Aluminium, Grey Iron, Compacted Graphite Iron (CGI) and Spheroidal Graphite Iron Cylinder Heads and Blocks (passenger cars), Brackets and Coolant Cover Ducts Stereo and Light Optical Microscopes Joachim Lindkvist Telephone: address: Grey iron, CGI, Spheroidal graphite iron Cylinder blocks and heads, brackets Hardness machines (Brinell)
3 Mikael Nordqvist Telephone: address: Welding & Brazing, Stainless Steels Weld- and Brazed Components GDOES Fredrik Sandberg Telephone: address: Forged Components, Steel & Heat Treatment Gears and shaft Scanning Electron Microscopy & Energy Dispersive X-ray Spectroscopy Pål Schmidt Telephone: address: Grey iron, CGI, Nodular iron, Cast aluminium, Casting simulation Cylinder blocks and -heads, Housings, Brackets Non-destructive testing Henrik Svensson Telephone: address: Grey iron, CGI, Spheroidal graphite iron Cylinder blocks and heads, brackets
4 Group BF Surface Technology & Testing Mats Lillieroth Manager Surface Technology & Testing Telephone: address: mats.lillieroth@volvo.com Maqsood Ahmad Telephone: address: maqsood.ahmad@volvo.com Fatigue and mechanical testing at high temperature, Low cycle fatigue, Creep, Material data for FE analysis Components working at elevated temperature such as exhaust manifold, Cylinder heads MTS hydraulic system for fatigue testing MTS hydraulic system for fatigue testing Filip Bergman Telephone: address: filip.bergman@volvo.com Screw joint testing, Courses in screw joint design All types of screw joints Screw joint test equipment Christer Buchwald Telephone: address: christer.buchwald@volvo.com Database development, PL hybrid system Common Materials Database (CMD) FileMaker server, Web server, Database hosting etc. Mikael Engblad Telephone: address: Mikael.engblad@volvo.com Sample preparation, Cutting, machining, grinding & polishing Sample preparation related problems
5 Fethi Izerhab Telephone: address: Fatigue testing, Fracture mechanics Materials, Joints, Gears Strain gauge hole drilling equipment Maria Japlin Telephone: address: Electrical contacts, Electronics and Sensors Chemicals Henrik Karlsson Telephone: address: Powder metallurgy, Steel and heat treatment, Surface technology Injector yokes, Valve calipers, Valves and Springs Heat treatment furnaces Bosse Larsson Telephone: address: Tensile Testing, Bolted joints, Magnetic particle and Dye Penetrant Testing Bolted joints and components related to tensile testing Zwick tensile testing machine Markku Rausa Telephone: address: Workshop & sample preparation. Cutting, machining, grinding & polishing Workshop related problem solving involving most types of mechanical components All workshop equipment, fork lift truck
6 Göran Wahlberg Telephone: address: Electrical contacts and electronics Typical components: Connectors, Sensors and Terminals Mattias Widmark Telephone: address: Fatigue testing and calculation, Fracture mechanics, Defect sensitivity Typical components: Engine and chassis component Reza Zarabi Telephone: address: Screw joint testing Screw, nut, gasket and rivet Macro photo room Gunnar Åkerström Telephone: address: Mechanical testing method development, Strength of metallic materials, Residual stresses Crank shafts, Gears, Rocker arms, Springs Hydraulic and electromagnetic load frames, measuring systems
2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
More informationMAN - MERCEDES - BENZ
SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00
More informationAUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or
More informationN. K. BURRELL REGIONAL MANAGER - TECHNICAL SERVICE METAL IMPROVEMENT COMPANY
CONIROLLED SHOT PEENING TO PRODUCE RESIDUAL COMPRESSIVE STRESS AND IMPROVED FATIGUE LIFE N. K. BURRELL REGIONAL MANAGER - TECHNICAL SERVICE METAL IMPROVEMENT COMPANY Most manufacturers of heavy equipment
More informationWynn s Extended Care
Wynn s Extended Care Every car deserves to receive the very best care... especially yours. How Do You Keep Your Reliable Transportation Reliable? Count on Wynn s Because Wynn s has been caring for cars
More information1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
More informationKobelco Extended Warranty Program. www.kobelco-europe.com
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
More informationDR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
More informationC O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
More informationAdditive Manufacturing applications in Aerospace, Automotive, Robotics and beyond
Additive Manufacturing applications in Aerospace, Automotive, Robotics and beyond JGIF 2015 Tokio, 9th of November 2015 Joachim Zettler Airbus Apworks GmbH Airbus APWorks Founded in 2013 A perfectly harmonized
More informationMonster Mini Stock Assn rules for 2015
Monster Mini Stock Assn rules for 2015 *note 2 engine combinations* BODY - stock auto only may have complete aluminum body inner panel may be removed rear of car must be closed - no holes or flaps to meet
More informationWARNING! Failure to follow these inspection procedures can cause personal injury and property damage.
GARDNER-DENVER TECHNICAL MANUAL CPTEN-136 07/03 Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model.: Hoist Serial.: WARNING! Failure to follow these inspection procedures can cause
More informationKELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationWorld Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
More informationMASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
More informationEveryTM. Coverage. North American Truck Coverages For 2013 ISL9 And ISB6.7 Engines.
EveryTM Coverage. North American Truck Coverages For 2013 ISL9 And ISB6.7 Engines. EveryTM Confidence. You can have confidence knowing that your Cummins 2013 engine is backed by the total coverage of Cummins
More informationEveryTM. Coverage. North American Truck Coverages For ISL9, ISC8.3 And ISB6.7 Engines.
EveryTM Coverage. North American Truck Coverages For ISL9, ISC8.3 And ISB6.7 Engines. EveryTM Confidence. You can have confidence knowing that your EPA 2010 engine is backed by the total coverage of Cummins
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationApplications Power train Transmission and driveline
Applications Power train Transmission and driveline Table of contents 9 Transmission and driveline... 2 9.1 Driveline concepts... 3 9.2 Transmission... 4 9.3 Housings for driveline components... 7 9.4
More informationSpecifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
More information1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
More informationBR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
More informationRESIDUAL STRESSES AND THEIR EFFECTS ON FATIGUE RESISTANCE
RESIDUAL STRESSES AND THEIR EFFECTS ON FATIGUE RESISTANCE Ali Fatemi-University of Toledo All Rights Reserved Chapter 8 Residual Stresses & Their Effects 1 RESIDUAL STRESSES AND THEIR EFFECTS ON FATIGUE
More informationPLAN VEHICLE THE COST OF UNEXPECTED REPAIRS FREQUENTLY ASKED QUESTIONS PACKAGE PROTECTION
Administered by GWC Warranty Corporation Showroom Level, 40 Coal Street Wilkes-Barre, PA 18702 1.800.482.7357 www.gwcwarranty.com This plan is backed by American Bankers Insurance Company of Florida (in
More informationRear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationMERCEDES FIRST EDITION - 2013
FIRST EDITION - 2013 CONTENTS Accessories... 1 Hydraulic Jacks Air Intake... 2 Air Filter Charger Charging System Intake Charger Hose Intake Manifold Intake Pipe Air Filter Intercooler Charger Aircondition...
More informationRail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107
U 411 1 Rear view mirror, round, metall 13cm Ø 002 045 2 Raised airintake 002 060 3 Side panelling, front, left 002 030 Side panelling, front, right 002 031 4 Panelling left 002 051 dto. right 002 052
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
More informationSkills Standards MEDIUM/HEAVY DUTY TRUCK: DIESEL ENGINE REPAIR TECHNICIAN OD32151 ALIGNED WITH ASE/NATEF
Skills Standards MEDIUM/HEAVY DUTY TRUCK: DIESEL ENGINE REPAIR TECHNICIAN OD32151 ALIGNED WITH ASE/NATEF Competency-Based Education: OKLAHOMA S RECIPE FOR SUCCESS BY THE INDUSTRY FOR THE INDUSTRY Oklahoma
More information7.1 Safety Precautions-Aircraft and Workshop 3 3 3. 7.2 Workshop Practices 3 3 3
Note: This module does not apply to category B3. Relevant subject matters for category B3 are defined in module 7B. 7.1 Safety Precautions-Aircraft and Workshop 3 3 3 Aspects of safe working practices
More informationillustration ref. no. description SWAG no. RS Kombi, Octavia Scout 4x4, Octavia 4x4 for: Octavia, Octavia Kombi
Skoda protection Kit for strut 20 56 0003 - for: Fabia Skoda protection Kit for strut 30 56 0010 for: Felicia I, Felicia II - Skoda protection Kit for strut 30 56 0029, Octavia Kombi 4x4, Octavia RS, Octavia
More informationUNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING
UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING Introduction to Automobile Engineering Structure 1.1 Introduction Objectives 1.2 Definition 1.3 Classification of Vehicles 1.4 Layout of an Automobile Chassis
More informationEveryTM. Coverage. North American Truck Coverages For ISX15 And ISX12 Engines.
EveryTM Coverage. North American Truck Coverages For ISX15 And ISX12 Engines. North American Heavy-Duty Truck Coverages. How could we make Cummins Heavy-Duty base engine warranty coverage better than it
More informationEveryTM. Coverage. North American Truck Coverages For 2013 ISX15 And ISX12 Engines.
EveryTM Coverage. North American Truck Coverages For 2013 ISX15 And ISX12 Engines. North American Heavy-Duty Truck Coverages. Cummins Heavy-Duty base engine warranty coverage is better and more comprehensive
More informationSample G1 ASE-type Certification Test. Sample ASE Maintenance and Light Repair (G1)-Type Certification Test
Sample G1 ASE-type Certification Test Sample ASE Maintenance and Light Repair (G1)-Type Certification Test Content Area Questions In Test Percentage Of Test A. Engine Systems 9 16% B. Automatic 4 7% Transmissions
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationNew Developments in Forging Product and Process Engineering
1 New Developments in Forging Product and Process Engineering Baba N. Kalyani, M. Muckelbauer, Shyam Takale Bharat Forge Ltd., Pune, India Abstract Innovation is the key to success. Forging Companies,
More informationFig 1 Power Transmission system of Tractor
POWER TRANSMISSION SYSTEM Transmission is a speed reducing mechanism, equipped with several gears (Fig. 1). It may be called a sequence of gears and shafts, through which the engine power is transmitted
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
More informationComponent engineering (MF2010)
Component engineering (MF2010) Lecture 1 Course introduction Failure mechanisms MF2010@md.kth.se http://www.kth.se/itm/inst/mmk/edu/inst_kurser/md/mf2010/ 1 Component engineering, 6 hp Advanced level Compulsory
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
More informationBuilding a Small Horizontal Steam Engine
T Building a Small Horizontal Steam Engine HE small engine described in this article was built by the writer in his spare time about an hour a day for four months and drives the machinery in a small shop.
More informationCLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
More information1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
More informationCIRP Encyclopedia of Production Engineering
The International Academy for Production Engineering Luc Laperriere Gunther Reinhart Editors CIRP Encyclopedia of Production Engineering Volume 1 A-H With 1145 Figures and 85 Tables ^ Springer Reference
More information6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible
LINCOLN PREMIER LIMITED WARRANTY 6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible Comprehensive Coverage Because Lincoln has always been a brand you can trust and respect,
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationCNC Ported Big Valve Cylinder Heads. Performance Intake Manifold. Forged Pistons (Engine set with rings, pins and clips)
Performance Engine Assemblies 20001721 2.0lt Performance Crate Engine 205BHP 20001722 2.0lt Performance Crate Engine 225BHP 20001723 2.0lt Performance Crate Engine 255BHP 20001725 2.3lt Performance Crate
More informationEngine Bearing Materials
Engine Bearing Materials Dr. Dmitri Kopeliovich (Research & Development Manager) The durable operation of an engine bearing is achieved if its materials combine high strength (load capacity, wear resistance,
More informationAprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
More informationULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
More information2011-14 F250 6 RADIUS ARM KIT
92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationPropeller Equipment Sale. For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationDO NOT attempt to repair hub and wheel bearing assembly.
Page 1 of 6 HUB & WHEEL BEARINGS (WITH PULSE VACUUM HUBLOCK) DO NOT attempt to repair hub and wheel bearing assembly. Removal DO NOT remove hub lock assembly by prying on hub lock legs. This can crack
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationThis kit may void factory warranty please check with manufacturer.
Thank you for purchasing a Sinister Manufacturing Company EGR delete kit. Precision manufactured using the highest grade 304 stainless steel and 6061 billet aluminum; this EGR kit is designed to endure
More informationSUSPENSION DIAGNOSIS
SECTION 2A SUSPENSION DIAGNOSIS TABLE OF CONTENTS Diagnosis... 2A-2 General Diagnosis... 2A-2 Hub and Bearing... 2A-7 2A-2 SUSPENSION DIAGNOSIS DIAGNOSIS GENERAL DIAGNOSIS Problems in the steering, the
More informationQUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
More information1993 SUSPENSION Volkswagen Front. EuroVan
Article Text ARTICLE BEGINNING 1993 SUSPENSION Volkswagen Front EuroVan DESCRIPTION FWD independent suspension is an double-wishbone type with torsion bars mounted on upper control arm. Wheel is supported
More informationBuy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationHISTORY IN THE BRAKING
Practical Tips HISTORY IN THE BRAKING Documentation of a disc brake repair 1 Start of brake repair Visually check the brake disc and/or pads for sign of reaching their wear limit. Before starting the brake
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationME 612 Metal Forming and Theory of Plasticity. 1. Introduction
Metal Forming and Theory of Plasticity Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü In general, it is possible to evaluate metal forming operations
More informationNetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807
Metal Injection Molding Design Guide NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Solon, OH 44139 solutions@netshapetech.com 1 Frequently Asked Questions Page What
More informationHow Do I Replacing My Rear Brake Pads and Rotors?
How Do I Replacing My Rear Brake Pads and Rotors? WARNING! Always have the vehicle under inspection on level ground, in park with the emergency brake on. Always wear protective eyewear, gloves and necessary
More informationCat S O SSM. Services. Understanding Your Results. Understanding Your: S O S Oil Reports S O S Oil Results S O S Coolant Reports S O S Coolant Results
Cat S O SSM Services Understanding Your Results Understanding Your: S O S Oil Reports S O S Oil Results S O S Coolant Reports S O S Coolant Results Contents Overview of S O S Oil Reports...4-5 Overview
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationHoppers Stoppers Guide and Considerations for Designing Brakes for Modified Cars.
Hoppers Stoppers Guide and Considerations for Designing Brakes for Modified Cars. As a general policy when embarking on designing your brake upgrade kit we ensure we work with in the guidelines of DOTARS
More information125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
More informationBRAKE DRUM AND ROTOR SERVICE INFORMATION
SERVICE INFORMATION To achieve maximum drum life and optimum performance, proper brake maintenance and brake balance are essential. Consult your truck or trailer manufacturer s maintenance manual for proper
More informationSELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
More informationB.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
More informationMINI EXTENDED SERVICE CONTRACTS
MINI EXTENDED SERVICE CONTRACTS LESS WORRY, MORE WEEEE! CONTINUING COVERAGE FOR YOUR NEW, USED, OR CERTIFIED PRE-OWNED MINI. Whether your odometer is ticking toward the end of your original 4-year/50,000-mile
More informationJCB ASSETCARE EXTENDED WARRANTY PLAN AGREEMENT BOOKLET
JCB EXTENDED WARRANTY PLAN AGREEMENT BOOKLET INTRODUCTION To safeguard the performance that makes a JCB machine such an asset, JCB has developed the JCB Assetcare program. Assetcare is a range of flexible
More informationInstructions and precautions. Fork Height. Visit our website at: http://www.harborfreight.com
Pallet Jack Item 68760 / 68761 Instructions and precautions Specifications Capacity Control Lever Fork Height Fork Length Fork Width Maximum Minimum Width over Forks Steering Wheel Dia. 2-1/2 Ton (5,000
More information356 CHECKLIST ELECTRICAL: CHASSIS:
356 CHECKLIST ELECTRICAL: Headlights hi/lo beam Taillights Running lights Turn signals Brake lights License light(s) Fog lights Reverse light Horn Dome lights Dash lights Temp guage Tank level guage Tachometer
More informationIron Alloys. Iron castings are produced by a variety
Iron castings are produced by a variety of molding methods and are available with a wide range of properties. Cast iron is a generic term that designates a family of metals. To achieve the best casting
More informationREMAN ENGINES APPLICATION GUIDE
REMAN ENGINES APPLICATION GUIDE CNH REMAN ENGINES Today, there are more reasons than ever to choose CNH Remanufactured s for your equipment. From more engine choices to less downtime during installation,
More informationSTORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationExtended Warranty Programme
Extended Warranty Programme 1 P a g e Extended Warranty Introduction Volkswagen Extended Warranty Programme is an extension of the New Vehicle Warranty offered by Volkswagen Group Sales India Private Limited
More information46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationCOVERING MILLIONS Preferred Protection Plan, a Service Group Company www.sgifs.com PO Box 26830, Austin, TX 78755-0800.
COVERING MILLIONS Preferred Protection Plan, a Service Group Company www.sgifs.com PO Box 26830, Austin, TX 78755-0800. 1-877-565-0816 PPP-308 0903 rev 0408 BENEFITS New and Pre-Owned Vehicles Preferred
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationEngine/Gearbox Combinations
Engine/Gearbox Combinations Engine code letters ARV/ATY AME ATZ Displacement 1.0 ltr. 1.4 ltr. 1.4 ltr. Power output 37 kw/50 HP 50 kw/68 HP 50 kw/68 HP Engine management system Simos 3PB Simos 3PB Simos
More informationSuzuki Katana Superbike By Evan Jones Table of Contents
By Evan Jones www.eajonesgue.com/scalemodels Table of Contents Introduction:... 2 Build Notes:... 2 Frame/Bodywork:... 2 Wheels and Tires:... 3 Front forks:... 3 Rear suspension:... 4 Engine and Drive
More informationINDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
More informationModel Marine Engine Requires No Castings
Model Marine Engine Requires No Castings EXHAUST PORTS No. 29 No. 31 CROSSHEAD-GUIDE BRACKET No. 29 (STEAM PORT) CYLINDER BLOCK R CYLINDER COVERS No.31 CYLINDER SUPPORT No.29 (STEAM PORT) VALVE LINER VENT,
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationENGINE Dinli 904 D1033-011
ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification
More information