Roberts Engineering Ltd C&R Equipment Ltd Product information 2013
|
|
|
- Mercy Curtis
- 9 years ago
- Views:
Transcription
1 Roberts Engineering Ltd C&R Equipment Ltd Product information 2013
2 Heavy Duty Cargo Blocks Manufactured in accordance with: B.S. 4018: 1966 A.S. B Special Features: Tested and Certified with easy to read W.L.L plate Quick action single snatch facilitates ease of rope reeving with positive location and locking Swivelling crosshead Fitted with high load green pin shackle Fully machined sheave with greaseable bronze bearing hub Wide shoulder sheave profile ensures maximum rope guiding and added sheave protection Stepped axle is fully locked for block rigidity Becket for third fall of rope D.L.L Australia (Vict.) approved Can be supplied in a crosshead - hook configuration, available on request Available in 1, 2 or 3 sheave configurations Powdercoated side plates with zinc plated hardware for maximum corrosion resistance BLOCK SIZE W.L.L FIXED PRODUCT CODES W.L.L MOVING PROOF LOAD SHEAVE Ø WIRE ROPE Ø A B C WEIGHT kg Page 1
3 High Tensile Rigging Blocks Manufactured in accordance with: B.S. 4018: 1966 A.S. B Special Features: Tested and Certified with easy to read W.L.L plate Quick action single snatch facilitates ease of rope reeving with positive location and locking Swivelling crosshead Fitted with high load green pin shackle (optional) Fully machined sheave with greaseable bronze bearing hub Wide shoulder sheave profile ensures maximum rope guiding and added sheave protection Stepped axle is fully locked for block rigidity Becket for third fall of rope D.L.L Australia (Vict.) approved Available in 1 or 2 sheave configurations Powdercoated side plates with zinc plated hardware for maximum corrosion resistance BLOCK SIZE W.L.L FIXED PRODUCT CODES W.L.L MOVING PROOF LOAD SHEAVE Ø WIRE ROPE Ø A B C D Ø WEIGHT kg Page 2
4 High Tensile Rigging Blocks Manufactured in accordance with: B.S. 4018: 1966 A.S. B Special Features: Tested and Certified with easy to read W.L.L plate Quick action double snatch facilitates ease of rope reeving with positive location and locking Swivelling crosshead Fitted with high load green pin shackle (optional) Fully machined sheave with greaseable bronze bearing hub Wide shoulder sheave profile ensures maximum rope guiding and added sheave protection Stepped axle is fully locked for block rigidity Becket for third fall of rope D.L.L Australia (Vict.) approved Available in 1 or 2 sheave configurations Powdercoated side plates with zinc plated hardware for maximum corrosion resistance BLOCK SIZE W.L.L FIXED W.L.L MOVING PROOF LOAD SHEAVE Ø WIRE ROPE Ø WEIGHT kg PRODUCT CODE Page 3
5 Trawl & Logging Swivels Special Features: Compact and rugged design 5:1 Safety factor Fully serviceable Greaseable Fully sealed SKF thrust bearing Eyes will accept Shackles and Haerlocks Proof loaded to two times W.L.L Zinc plated for corrosion resistance Also available in Clevis - Eye or Clevis - Clevis configurations (Eye - Eye shown) SWIVEL W.L.L PROOF LOAD A B Ø C D Ø E WEIGHT PRODUCT kg CODE Page 4
6 Midget Strawline Swivel Special Features: Fully machined 316 Stainless steel construction for maximum corrosion resistance Fully ball raced for smooth swivel action and long service life Greaseable Eyes will accept shackles 5:1 Safety factor Proof loaded to two times W.L.L 0.5 W.L.L Compact and durable design PRODUCT CODE Page 5
7 G Hooks & Recessed Links G' HOOK TO FIT RECESSED LINK PLATE A B C D E PRODUCT CODE SIZE Ø V W X Y Z PRODUCT CODE Page 6
8 Ball Bearing Sheaves Special Features Fully machined from billet Zinc plated for maximum corrosion resistance SKF Single row deep groove ball bearing installed and circliped as standard Custom sheaves can be manufactured to any specification, please see page 8 STOCK SIZE OUTSIDE Ø A B.O.G Ø B SHAFT Ø C HUB WIDTH D RIM WIDTH E ROPE Ø F PRODUCT CODE * * STOCK SIZE 168, Standard crane truck sheave. ** STOCK SIZE 200, Crane truck sheaves available on request. Page 7
9 Replacement Ball Bearing Sheave SPECIFY DIMENSION OUTSIDE Ø A B.O.G Ø B SHAFT Ø C HUB WIDTH D RIM WIDTH E ROPE Ø BEARING TYPE FINISH ROBERTS ENGINEERING LTD Precision Engineers/CNC Machining Unit 3D 200 Maces Road, PO Box 19966, Christchurch, New Zealand T M F E [email protected] W Page 8
10 Plain Bearing Sheaves Special Features Fully machined from billet Zinc plated for maximum corrosion resistance Supplied with bronze or nylon plain bearing Custom sheaves can be made to any specification, please see page 10 STOCK OUTSIDE Ø B.O.G Ø SHAFT Ø HUB WIDTH RIM WIDTH ROPE Ø PRODUCT SIZE A B C D E F CODE Page 9
11 Replacement Plain Bearing Sheaves SPECIFY DIMENSION OUTSIDE Ø A B.O.G Ø B SHAFT Ø C HUB WIDTH D RIM WIDTH E ROPE Ø FINISH ROBERTS ENGINEERING LTD Precision Engineers/CNC Machining Unit 3D 200 Maces Road, PO Box 19966, Christchurch, New Zealand T M F E [email protected] W Page 10
12 Replacement Hook Forgings Drop forged, single hooks to DIN DIMENSIONS A B C SHANK Ø D THREAD Ø E THREAD PITCH NUT LENGTH F NUT Ø G W.L.L ROBERTS ENGINEERING LTD Precision Engineers/CNC Machining Unit 3D 200 Maces Road, PO Box 19966, Christchurch, New Zealand T M F E [email protected] W Page 11
13 Replacement Hook Safety Latches HOOK W.L.L A D B C Custom sizes can be made to order Zinc plated for corrosion resistance Supplied in kit form, with bolt & spring Page 12
14 W.L.L 2- Standard Non-Snatch Pulley Blocks Special Features Light weight W.L.L - 2 s 4:1 Safety Factor Swivelling eye & crosshead Eye fitted as standard, forged hook can be fitted on request Grooved for 10 wire rope 100 Sheave - Nylon bushed 150 Sheave - Ball bearing Also available in 2 and 3 sheave configurations, non-snatch Zinc plated for corrosion resistance SHEAVE Ø A B C D WEIGHT kg PRODUCT CODES - WITH EYE PRODUCT CODES - WITH HOOK SHEAVE Ø SINGLE DOUBLE TRIPPLE SHEAVE Ø SINGLE DOUBLE TRIPPLE T T T T T T T T T T T T Page 13
15 W.L.L 1- Standard Pulley Blocks Special Features Light weight W.L.L - 1 4:1 safety factor Swivelling eye Eye fitted as standard, forged hook can be fitted on request Single snatch and non-snatch versions available Quick action single snatch facilitates ease of rope reeving Grooved for 10 wire rope 100 Sheave - Nylon bushed 150 Sheave - Ball bearing Zinc plated for corrosion resistance Available in 1, 2 and 3 sheave configurations *Note: 2 and 3 sheave blocks are Non-snatch SHEAVE Ø A B C D WEIGHT kg PRODUCT CODES - DOUBLE, NON-SNATCH SHEAVE Ø WITH EYE WITH HOOK PRODUCT CODES - SINGLE PRODUCT CODES - TRIPPLE, NON-SNATCH SHEAVE Ø NON-SNATCH SNATCH NON-SNATCH SNATCH SHEAVE Ø WITH EYE WITH HOOK WITH EYE WITH EYE WITH HOOK WITH HOOK Page 14
16 75 Open Side Pulley Block Special features Full 316 S/S construction for best protection in marine environments Can be supplied with 316 S/S or Nylon sheave Fitted with swivelling eye as standard Open side plate allows fast rigging for simple winch lifts W.L.L 1.5 5:1 Safety factor
17 Marlin Spikes Special features Manufactured in New Zealand from 4140 High Tensile round bar Range of sizes available to meet individual requirements for wire rope splicing Available lengths, 200, 300, 450, 600 & 800 Fully machined with heat treated and ground tip NOMINAL LENGTH PRODUCT CODE Page 15
The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 9001.
Campbell Blocks Table of Contents Begun as a forging company in 1834, Campbell/Brewer-Titchener first manufactured horse harnesses, then carriage hardware, then horseless carriage hardware. From hardware
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Blocks/Sheaves/Swivels
Complete Contractor and Industrial Supplier Sling and Rigging Specialist Since 1930 SECTION INDEX S E C T I O N BALL Overhaul...-13 BLOCK AND TACKLE 101 Line Parts...-3 Loads on Blocks...-2 Maintenance...-1
MACHINE SCREW ACTUATORS 2 to 100 Tons
2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.
ROV shackles. your reliable partner
ROV shackles your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope-
6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
RIGGING HARDWARE ASME B30.26. Addresses detachable lifting hardware for lifting purposes
RIGGING HARDWARE ASME B30.26 Addresses detachable lifting hardware for lifting purposes Adjustable Hardware (Turnbuckles, Eye nuts, Swivel Hoist Rings and Eyebolts Compression Hardware (Wire Rope Clips
Working Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.)
STAINLESS STEEL Swivels Eye & Eye Swivels T316 Size Overall Length Limit SWVLEESS1/4 1/4 2.60 660.13 SWVLEESS5/16 5/16 3.54 1,045.24 SWVLEESS3/8 3/8 4.53 1,925.42 SWVLEESS1/2 1/2 5.75 2,750 1.28 SWVLEESS5/8
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.
2,500 3,700 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
WARNING! Failure to follow these inspection procedures can cause personal injury and property damage.
GARDNER-DENVER TECHNICAL MANUAL CPTEN-136 07/03 Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model.: Hoist Serial.: WARNING! Failure to follow these inspection procedures can cause
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 [email protected]. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
4,000 6,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle (Stacker) Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad
PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
Fork Lift Truck Attachments
Lift Truck Attachments Mounted Sweeper - The Basil The fork mounted sweeper is a quick and easy solution for reheaping your loose granule products such as sand, top soil, grain or similar. Optional left
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS Safety Handling of Precast Concrete Products The lifting of any precast product requires the use of special equipment and substantial planning and knowledge.
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
EROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS
MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M SPECIALTY COPPER ALLOYS FOR THE AEROSPACE INDUSTRY EROSPACE LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS NBM s corporate
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
000594 Eye-bolt for front chain adjustment, Pre-49 singles, 1949-55 twins, 1958-on CS singles 7.60 6.33
Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
04 Series Capacity to 350. Polished Stainless Steel Perfect for Washdown and Corrosive Environments
0 Series Capacity to 350 0 For light-duty applications where frequent washdowns are necessary. Ideally suited for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents
CLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
Rear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
Stainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: [email protected]
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common
Catalogue. 2 Wheel Drive Tow Carts Model Part No Picture Description Packaging. www.helitowcart.com [email protected] +1.418.561.
Catalogue 2 Wheel Drive Tow Carts V90 151 0002 00 A Application: Economical version for R22, R44 & R66 only, on regular surfaces. Ideal for private owners that operate from local airport. With rigid arm
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
Wire Rope Slings SLING LEG OPTIONS WIRE ROPE SLINGS
SLING LEG OPTIONS Standard End Fitting Combinations To order sling legs, choose the correct size from the tables on the following pages. Determine the length needed and specify the end fittings required
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
ENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
POLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
Crane Best Practices in Tree Removal Hoisting a Qualified Arborist. By Mark Adams
Crane Best Practices in Tree Removal Hoisting a Qualified Arborist By Mark Adams Many tree companies today either own or rent cranes for use in removing trees. As cranes become more and more common in
New PROFURL Furling Systems: The Best of our Technology for all our Customers. Racing Systems: Performance & Ease of Use for 6 to 20 m boats
Racing Systems: Performance & Ease of Use for 6 to 20 m boats New PROFURL Furling Systems: The Best of our Technology for all our Customers Cruising Systems: Strength & Security for 5 to 26 m boats Cruising
Makes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
WOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
THE FLYING SCOT A BASIC GUIDE TUNING AND SAIL TRIM By Harry Carpenter
THE FLYING SCOT A BASIC GUIDE TO TUNING AND SAIL TRIM By Harry Carpenter Tuning the Flying Scot Rig Boat set up In setting the mast rake on a Flying Scot, most Scot sailors run a tape measure up the mast
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
Hoist Rings. Sizes and Styles for all your Applications and Requirements. HR-125 The Original. SS-125 Stainless Steel. HR-1000 Heavy Lift
s and Styles for all your Applications and Requirements HR-125 The Origal HR-1000 Heavy Lift SS-125 Staless Steel HR-100 Pivot HR-125C Grade 8 Cha HR-125W Web HR-1200 Side Pull HR-500 Trench Cover English
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page
PUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
» 30,000 to 60,000 lb. capacity» Single and tandem axle
ROLL-OFF CABLE HOISTS Tel: 800.285.0666 [email protected] www.wastequip.com Extendable Tail (EX) cable hoists are ideal for areas with clearance issues that require a low loading height.» 30,000 to 60,000
Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
Slings, Rigging and Lifting Equipment
A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Title: Number: SLINGS, RIGGING AND LIFTING EQUIPMENT GM-11-038-02 Version Number: 13.0 Date Revised:
PLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
Click. Campbell Chain. on the section you want
Campbell Chain Founded in 99, Campbell is the largest manufacturer of welded and weldless chain in the United States. Users of Campbell chain can select from a wide range of working load capacities including
KELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
DryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
COASTAL SERIES. 316 Solid Stainless Steel Door Furniture
COASTAL SERIES 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer
OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
Operating Instructions Hand pallet trucks HU Profi. Issue 08.2000
Operating Instructions Hand pallet trucks HU Profi Issue 08.2000 Index 1 Introduction 1.1 Product description 1.2 General information on service and maintenance 1.3 Spare parts 1.4 Dimensions 2 Correct
For New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
MAXFLEX PINNACLE CABLE
MXFLEX PINNCLE CBLE Results in Maximum Efficiency and Reduced Backlash Maximized the cable efficiency by reducing 50% of the contact area of core-to-liner when minimal input force is applied. Results in
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: [email protected] 1160F Aluminum Corner
HOSES COMPOSITE HOSES & FITTINGS HOSES. Pag. 5J533 TANK CLEANING 10 BAR (150 PSI) BS5842 ARRETE' ADR ANNEXE 1
COMPOSITE S & FITTINGS Pag. S S 5J533 TANK CLEANING 10 BAR (150 PSI) 5J551 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT - 10 BAR (150 PSI) 5J553 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT -
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
cbperformance.com Please read this entire brochure prior to installing your CB Performance Products MAGNASPARK II distributor.
- Easy -wire installation with no external spark box necessary, but can be used with one. - Precision CNC machining and hand assembled construction. This is a premium product. - Accurate super hot spark
TELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
CLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
Common Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
Super Slider ADJUSTABLE FROM 3.5-12 Model #HD26229
Super Slider ADJUSTABLE FROM 3.5-12 Model #HD26229 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS
Experience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
Boom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
How To Ensure Safety Of Lifting Equipment
1 of 12 2 of 12 CONTENTS 1.0 OBJECTIVES... 3 2.0 SCOPE... 3 3.0 DEFINITION OF TERMS... 3 3.2.1 Loose Lifting Tackle... 3 3.2.2 Examination... 4 3.2.3 Inspection... 4 4.0 RESPONSIBILITIES & AUTHORITIES...
Shackles combined with Round slings
Shackles combined with Round s your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards
Operating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
RINGFEDER. Automatic Hook Couplings for Road and Cross Country Vehicles. TYPE RUwg. Prospect
RINGFEDER E 07 00 Prospect Automatic Hook Couplings for Road and Cross Country Vehicles TYPE RUwg Automatic Hook Couplings Types RUwg K O D, K 1 D, K 2 D, K 3 D, K 4 D for towing eye according to VG 74059
BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
PEL-tuote Oy Seppälänsalmentie 181 58900 Rantasalmi FINLAND www.pel-tuote.fi
PEL-tuote Oy Seppälänsalmentie 181 58900 Rantasalmi FINLAND www.pel-tuote.fi Kivi-Pekka is the smallest of our stone pickers It has an output of maximum 700 kg per minute The standard machine is equipped
MONITOR SECTION INDEX
MONITOR SECTION INDEX Daspit Tool... E2 Daspit Tool - Truck Mount... E3 Daspit Tool - Throw Down Model... E4 Alpha MA-HV4-4 Aluminum Tiller Bar Monitor... E5 Alpha-E Tiller Bar Montior - 3... E6 SharpShooter
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units
왎 Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units Or tlinghaus Plates. Clutches. Brakes. Systems. Hydraulically actuated clutches and spring-applied brakes clutch/brake
Member of Van Beest International
P.O. Box, 0 AB Sliedrecht Industrieweg, HJ Sliedrecht The Netherlands Telephone : + 00 Fax : + E-mail : [email protected] Website : www.vanbeest.com Dear Customer, For over 0 years the production of high
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
INTERNATIONAL LABOUR ORGANISATION. REGISTER OF LIFTING APPLIANCES and ITEMS OF LOOSE GEAR
INTERNATIONAL LABOUR ORGANISATION REGISTER OF LIFTING APPLIANCES and ITEMS OF LOOSE GEAR Model Form and Certificates as required by Article 25(2) of the ILO Convention concerning Occupational Safety and
2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
POLE MOUNT SYSTEM EX-3 INSTALLATION
May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
Door Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,