Quadrax for Full Duplex Ethernet Link

Transcription

1 8D Series Quadrax Contacts Quadrax for Full Duplex Ethernet Link Quadrax contacts with robust MIL-DTL compliant screw coupling system for networks and high vibration environments. High speed One quadrax contact replaces twinax contacts. Data rate up to 1 Gbit/sec. = A wide range available Compatible with all Souriau standard shells, plating and inserts with #8 cavities. Same cavity for power, coax, triax and ELIO fiber optic. A flexible range Available in 100 & 150 ohms (grounded or not).

2 Description Front and rear removable versions available Crimp and PC tail versions available Standard #8 cavity insertion and removal tools Ground connection of the cable braid to the shell possible through the external shell of the #8 contact Compatible with star quad cable Characteristic impedance of 100 Ohms Mixed layouts not grounded Technical features Mechanical Operating temperature: -65 C up to 150 C Inner contact: copper alloy Contact body: copper alloy Contact insulator: thermoplastic resin Contact plating: gold over nickel Shell plating:. Aluminum shell: Cadmium olive drab (W) Nickel (F) Black zinc nickel (Z) Green zinc cobalt (ZC). Composite shell: Cadmium olive drab (J) Nickel (M) Without plating (X). Stainless steel shell: Passivated (K) Nickel (S). Titanium shell: Without plating (TT) Nickel (TF). Bronze shell: Without plating Electrical ISO/IEC category 6 compliant:. Next (cross talk): > 46 db at 50 MHz. Return loss: > 16 db at 50 MHz. Shield effectiveness: > 36 db at 80 MHz Contact to shell continuity: < 10 mω Contact resistance (low level):. Initial 15 mω. After tests 30 mω Dielectric withstanding voltage: Altitude Service I sea level 500 Vrms m 15 Vrms Insulation resistance:. At ambient temperature: > 5000 MΩ. At high temperature: > 1000 MΩ #4 contact cable size acceptance: AWG to AWG 6 Next (db) Frequency (MHz) Return loss (db) Frequency (MHz) Shield effectiveness (db) Frequency (MHz)

3 Ordering information Aluminum, Composite, Stainless steel & Titanium connector Basic Series 8D 0 Q 11 W 81 P N 84 L Shell style: 0: Square flange receptacle 5: Plug 7: Jam nut receptacle Type: C: Quadrax PC tail contacts* Q: Quadrax crimp contacts Shell size: (see next page) Plating: Aluminum shell: W: Olive green cadmium F: Nickel Z: Black zinc nickel ZC: Green zinc cobalt Stainless steel shell: K: Passivated S: Nickel Contact layout: See next page Contact type: P: Pin S: Socket Orientation: N, A, B, C, D & E Specification: 84: Quadrax grounded PC tail contact (100Ω)* 308: Quadrax not grounded PC tail contact (100Ω) 384: Quadrax grounded crimp contact (150Ω)* 408: Quadrax not grounded crimp contact (150Ω) 60: Quadrax grounded crimp contact (100Ω)* 61: Quadrax not grounded crimp contact (100Ω) Composite shell: J: Olive green cadmium M: Nickel X: Without plating Titanium shell: TF: Nickel TT: Without plating 550: Tin plated Quadrax not grounded PCB contact SnPb 550S: Tin plated Quadrax not grounded PCB contact SAC E: Tin plated Quadrax not grounded PCB contact Sn pur L: For P or S contact type only, connectors delivered without contacts, connectors marking P or S plus orientation Bronze connector Basic Series JVS C 00A P N 84 L Type: C: Quadrax PC tail contacts* Q: Quadrax crimp contacts Shell style: 00A: Square flange receptacle 16A: Plug 07A: Jam nut receptacle Shell size: (see next page) Contact layout: See next page Contact type: P: Pin S: Socket Orientation: N, A, B, C, D & E Specification: 84: Quadrax grounded PC tail contact (100Ω)* 308: Quadrax not grounded PC tail contact (100Ω) 384: Quadrax grounded crimp contact (150Ω)* 408: Quadrax not grounded crimp contact (150Ω) 60: Quadrax grounded crimp contact (100Ω)* 61: Quadrax not grounded crimp contact (100Ω) * For PC tail contacts or grounded versions please consult us. 550: Tin plated Quadrax not grounded PCB contact SnPb 550S: Tin plated Quadrax not grounded PCB contact SAC E: Tin plated Quadrax not grounded PCB contact Sn pur L: For P or S contact type only, connectors delivered without contacts, connectors marking P or S plus orientation 3

4 Contact layouts * #8 Quadrax 1#8 Quadrax #1 38#D 1#8 Quadrax #D 4#8 Quadrax 17#D 18#0 4#8 Quadrax 6#8 Quadrax #0 13#16 4#1 Coax 3#8 Quadrax #D 3#0, 11#16 #1 3#8 Quadrax 97#D 40#0 4#16 36#D 6#8 Quadrax 8#8 Quadrax * layout with quadrax contact: - grounded version only - plug with female contact & receptacle with male contact only Note: Mixed layouts not grounded. 4

5 Dimensions Square flange receptacle - Type 0 B C A PC Tail contacts Crimp contacts Shell size Aluminum A Max B Min B Max C Max Composite Stainless steel, Titanium & Bronze Aluminum Composite Stainless steel, Titanium & Bronze Aluminum Composite Stainless steel, Titanium & Bronze 11 to to All materials Jam nut receptacle - Type 7 Plug - Type 5 E F G D PC Tail contacts Crimp contacts Material Shell size 11 to 5 Aluminum, Stainless steel, Titanium & Bronze D Max E Min E Max F Max All materials Shell size 11 to 5 G Max 48 Note: All dimensions are in millimeters (mm) 5

6 Quadrax crimp contact Max 7.69 ±0. 45 Ø 5.53 ±0.0 5 Min.75 Max Ø 6.97 ±0.4 Quadrax PCB contact Max ± ±0. 45 Ø 7.99 ± ± ± ± Min Drill dimensions for PCB mount Ø 1. Min 45 Ø 0.75 Min Ø 1. Min Ø 0.75 Min Male contact 1 Ø 7.99 ±0.04 Ø 6.97 ± Max Female contact Ø 7.31 Max 1 Ø 6.97 ± ± Max Ø 7.31 Max Male contact Female contact Male contact Female contact Note: All dimensions are in millimeters (mm) 6

7 Contact ordering information In-line alignment key. All crimp contacts are sealed thru a sealing boot. Crimp contacts ordered separately are delivered with sealing boot. PC tail L= 4 ±0.1 mm Crimp Quadrax tools Inner contacts: M50/-01 crimping tool and K709 locator locator Contact type Pin Socket Pin Socket SOURIAU part number Recommanded cable Cross Norm Outer body: M50/5-01 crimping tool and M50/5-45 die set Impedance Release T Max ETH1-137A - 100Ω Rear 15 C ETH1-1501A - 150Ω Rear 15 C ETH1-138A - 100Ω Rear 15 C ETH1-150A - 150Ω Rear 15 C ETH1-1345A EN Ω Rear 150 C ETH1-1503A - 150Ω Rear 150 C ETH1-1346A EN Ω Rear 150 C ETH1-1504A - 150Ω Rear 150 C die set Cable type Reference Impedance Number of pairs Star quad ABS 1503 KD4 100Ω Insertion/extraction tool (standard size 8 cavity tools): (metallic) or M81969/14-06 (plastic) Metallic tool Plastic tool For further information contact us at contactmilaero@souriau.com or visit our web site WPN8DQDRXWUSEN01 Copyright SOURIAU Jan SOURIAU is a registered trademark. All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. 7