SAP Crystal Reports, version for Visual Studio 2010 Installation Guide SAP Crystal Reports for Visual Studio 2010 Support Package 02

Transcription

1 SAP Crystal Reports, version for Visual Studio 2010 Installation Guide SAP Crystal Reports for Visual Studio 2010 Support Package 02

2 Copyright 2012 SAP AG. All rights reserved.sap, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP BusinessObjects Explorer, StreamWork, SAP HANA and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions, Web Intelligence, Xcelsius, and other Business Objects products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of Business Objects Software Ltd. Business Objects is an SAP company.sybase and Adaptive Server, ianywhere, Sybase 365, SQL Anywhere, and other Sybase products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of Sybase, Inc. Sybase is an SAP company. Crossgate, EDDY, B2B 360, B2B 360 Services are registered trademarks of Crossgate AG in Germany and other countries. Crossgate is an SAP company. All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informational purposes only. National product specifications may vary.these materials are subject to change without notice. These materials are provided by SAP AG and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty.

3 Contents Chapter Installing SAP Crystal Reports, version for Visual Studio Installation overview...5 Installation requirements...5 Installing SAP Crystal Reports, version for Visual Studio Running a silent installation...6 To uninstall the SAP Crystal Reports, version for Visual Studio Maintaining SAP Crystal Reports, version for Visual Studio Appendix A More Information...11 Index 13 3

4 Contents 4

5 Installing SAP Crystal Reports, version for Visual Studio 2010 Installing SAP Crystal Reports, version for Visual Studio Installation overview On a Microsoft Windows platform, the SAP Crystal Reports, version for Visual Studio 2010 Installation Wizard works with Microsoft Windows Installer to guide you through the installation process. 1.2 Installation requirements Supported operating systems The following list provides the supported operating systems for SAP Crystal Reports, version for Visual Studio 2010: Windows 7 Windows Vista SP2 Windows XP Professional SP3 Windows 2008 Server R2 Windows 2003 Server R2 Installation prerequisites Before installing SAP Crystal Reports, version for Visual Studio 2010 ensure the following requirements are met: You are logged into the computer as Administrator. Microsoft Visual Studio 2010 is installed. Microsoft NET Framework 2.0 or higher is installed. For more information about installation requirements, refer to the Supported Platforms document available on the SAP Help Portal: Installing SAP Crystal Reports, version for Visual Studio

6 Installing SAP Crystal Reports, version for Visual Studio 2010 You have two options to install SAP Crystal Reports, version for Visual Studio 2010: using the installation program, or the silent mode. If you already have the same version of SAP Crystal Reports, version for Visual Studio 2010 installed, you will be prompted to repair or remove the installed version To install SAP Crystal Reports, version for Visual Studio 2010 using the installation program 1. Run Setup.exe from the SAP Crystal Reports, version for Visual Studio 2010 directory of your product distribution. 2. Choose a language for the setup program to use during the installation process. 3. When the "Welcome" dialog box appears, click Next. 4. In the "License Agreement" dialog, accept the license agreement then click Next. 5. In the "Start Installation" dialog, click Next. 6. Click Finish to complete the installation. SAP Crystal Reports, version for Visual Studio 2010 is installed. Note: When installation is performed on a 64-bit (x64) operating system, you will be asked if you would like to install the SAP Crystal Reports 64-bit runtime. This option is selected by default, and installing the runtime is recommended Running a silent installation A silent installation allows you to perform a command line installation of SAP Crystal Reports, version for Visual Studio 2010 on any machine in your system. A silent installation will not prompt you for information during the installation. The silent SAP Crystal Reports, version for Visual Studio 2010 installation is particularly useful when you need to perform multiple installations and do not want to interrupt people who are working on machines in your system. You can also use the silent installation command in your own scripts. For example, if your organization uses scripts to install software on machines, you can add the silent SAP Crystal Reports, version for Visual Studio 2010 installation command to your scripts. Note: When you perform a silent installation, you accept the SAP Crystal Reports, version for Visual Studio 2010 end-user license agreement by default. 6

7 Installing SAP Crystal Reports, version for Visual Studio 2010 When you perform a silent installation on a 64-bit (x64) operating system, the SAP Crystal Reports 64-bit runtime will not be installed automatically. The CRRuntime_64bit_13_0.msi package must be installed separately Command line silent installation The silent install command consists of the command setup.exe, followed by a number of parameters that provide information about the installation. There are several valid parameters that you can use, but it is good practice to keep the silent install as simple as possible. Example: Sample command line silent installation The following example installs the SAP Crystal Reports, version for Visual Studio 2010 silently, without displaying any dialogs. setup.exe /qn A silent install log file is created in the %TEMP% folder to capture all placeholder DLL errors. If the installation is successful, it is copied to the logging folder. If the installation fails for any reason, the installation log file remains in the %TEMP% folder Command line parameters The following table lists the most common parameters used in a command-line silent install. To use a parameter, place it on the command line after the setup.exe command. Note: Parameters that are not listed in this table may be available, but they have not been tested. Untested parameters are not supported. 7

8 Installing SAP Crystal Reports, version for Visual Studio 2010 Parameter /qn /qb REMOVE=ALL Description Use this option so that the user is not prompted during the install, or when the installation is complete. To prompt when the installation is complete specify "/qn+". Use this option to display a progress indicator during the installation. To prompt when the installation is complete, specify "/qb+". Uninstall the product. Note: This is a property and does not require the use of the switch: /. Example setup.exe /qn setup.exe /qb setup.exe REMOVE=ALL CLIENTLANGUAGE Use this to specify the language to use for the installation dialogs. Note: This is a property and does not require the use of the switch: /. setup.exe CLIENTLANGUAGE=JA UPGRADE Use this option to automatically perform an upgrade during a silent install. Note: If this is parameter is not specified, the silent install will not proceed with an upgrade. This is a property and does not require the use of the switch: /. setup.exe /qn UPGRADE=1 Language parameters These values are used for specifying the CLIENTLANGUAGE parameter during installation: Language value de en es Description German English Spanish 8

9 Installing SAP Crystal Reports, version for Visual Studio 2010 Language value fr it ja ko ru zh_cn zh_tw Description French Italian Japanese Korean Russian Simplified Chinese Traditional Chinese To uninstall the SAP Crystal Reports, version for Visual Studio Click Start > Settings > Control Panel. 2. Double-click Add or Remove Programs. 3. Select SAP Crystal Reports, version for Visual Studio 2010, and click Remove. 4. When the "Add or Remove Programs" dialog box prompts you to confirm that you want to remove SAP Crystal Reports, version for Visual Studio 2010 from your computer, click Yes. Wait while files are removed and the necessary configuration is carried out. SAP Crystal Reports, version for Visual Studio 2010 is uninstalled; you are returned to the "Add or Remove Programs" dialog box Maintaining SAP Crystal Reports, version for Visual Studio 2010 Maintenance mode is available when you click Change instead of Remove in "Add or Remove Programs". The following options are available when you are in maintenance mode: Option "Reinstall" "Remove All" Description This option allows you repair or fix the Crystal Reports installation program. This option allows you to remove the Crystal Reports installation program. 9

10 Installing SAP Crystal Reports, version for Visual Studio

11 More Information More Information Information Resource Location SAP product information SAP Help Portal Access the most up-to-date English documentation covering all SAP BusinessObjects products at the SAP Help Portal: (Business Intelligence) (Enterprise Performance Management) (Enterprise Information Management) Certain guides linked to from the SAP Help Portal are stored on the SAP Service Marketplace. Customers with a maintenance agreement have an authorized user ID to access this site. To obtain an ID, contact your customer support representative. To find a comprehensive list of product documentation in all supported languages, visit: SAP Support Portal The SAP Support Portal contains information about Customer Support programs and services. It also has links to a wide range of technical information and downloads. Customers with a maintenance agreement have an authorized user ID to access this site. To obtain an ID, contact your customer support representative. Developer resources SAP BusinessObjects articles on the SAP Community Network These articles were formerly known as technical papers. 11

12 More Information Information Resource Location Notes Forums on the SAP Community Network These notes were formerly known as Knowledge Base articles. Training From traditional classroom learning to targeted e-learning seminars, we can offer a training package to suit your learning needs and preferred learning style. Consulting Consultants can accompany you from the initial analysis stage to the delivery of your deployment project. Expertise is available in topics such as relational and multidimensional databases, connectivity, database design tools, and customized embedding technology. 12

13 Index I installation program 6 installing 6 installation program 6 requirements 5 silent installation 6 M maintenance mode 9 modifying the install 9 R repairing the install 9 S silent installation 6 command line 7 parameters 7 U uninstalling 9 13

14 Index 14