FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE
|
|
- Thomas Potter
- 7 years ago
- Views:
Transcription
1 STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE 1913
2 STAINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L, 630 (17-4) 309, 310, 321, 347, 6 Moly (AL-6XN, 254SMO, etc.) nickel based (Hastelloys, 625, 800, 20CB3, Monel, etc.), Titanium, Zirconium, Duplex (2205, Ferralium, etc.) and others available upon application and depending upon shape. 2B, #4 Finish 28 Gauge - 7 Gauge #8 Finish (Mirror) 22 Gauge - 11 Gauge HRAP Plate 3/16" - 2-1/2" Diamond Tread Plate 1/8" - 3/8" RIGIDIZED (Oxford Pattern) 16 Gauge - 14 Gauge COIL (26" - 72" wide) 28 Gauge - 3/8" ROUND ROD (12ft rml) 1/8" - 16" ALL-THREAD (12ft rml) 1/4" - 1-1/4" BAR (12ft rml) Rectangular 1/8" - 2" (thick) x 1/2" - 8" (wide) Hexagon 3/16" - 3" Square 1/8" - 4" PIPE (20ft rml) Seamless or Welded: Schedules 5s, 10s, 40s, 80s, ASTM A 312 1/2" - 48" NPS x Gauge and OD x Gauge, ASTM A 778 2" - 48" TUBING (20ft rml) Seamless or Welded: OD x Gauge ASTM A 249/A 269 1/8" - 4" ASTM A 778 2" - 48" Ornamental: Mill, 180 Grit or Mirror Finish, ASTM A 554 (.049" -.250" wall) Round 5/8" - 3" Square 3/4" - 6" Rectangular 3/4" x 1-1/2" - 4" x 6" Threaded: Classes 150 and /8" - 4" Socket Weld: Classes 150, 3000 and /8" - 4" Butt Weld: NPS and OD, ASTM A 774 1/2" - 48" ASTM A 403, Classes CR and WP Belled End 1/2" - 48" Grooved Ends for Couplings 1/2" - 48" Threaded Nipples: Sch 40s, Sch 80s 1/8" - 4" FLANGES ANSI B16.5, Classes 150 and 300 1/2" - 12" Slip-On, Blind, Socketweld, Threaded, Lap joint and Weld Neck Lightweight Slip-On, Blind and Backing For NPS and OD 1" - 48" ANGLE (20-22ft rml) 3/4" x 3/4" x 1/8" - 8" x 8" x 1/2" WIRE CLOTH, 36" x Coil 2 Mesh Mesh SHIM STOCK, 6" x 50" Rolls.001" -.031" FLATTENED & EXPANDED SHEET 1/2", 3/4" & 1-1/2" Diamonds #9 (.119"), #13(.080"), #16 (.050"), #18(.040") BEAM (20-22ft rml) 3" - 12" CHANNEL (20-22ft rml) 2" - 15" TEE BAR (20-22ft rml) 1-1/2" - 4" FASTENERS Common Nail 1" - 4-1/2" Ring Nail 1" - 3-1/2" ALUMINUM ALLOYS 1100, 3003, 5052, 5083, 5086, 5383, 5456, 6061, H14.032" - 1" 3003-H14.040" -.125" 5052-H32.025" -.500" 5083-H " - 4" 5086-H " - 2" 5383-H " - 1" 5456-H " - 2-1/2" 6061-T6.063" -.190" 6061-T " - 9" MIC 6 Cast Tooling Plate.1/4" - 4" COIL (36" - 96" wide).025" - 3/8" TREAD PLATE (Single Diamond Pattern) 3003-H22, Bright.063" -.250" 5052-H32, Semi-Bright.100" -.190" 5086-H " -.250" 6061-T6.125" -.500" EMBOSSED TREAD 5052-H32.063" -.125" FLATTENED & EXPANDED 1/2", 3/4" & 1-1/2" Diamonds.051",.081",.125" ROUND ROD 5086-H111 (12ft) 3/8" - 15" 5456-H111 1/2" - 2-1/2" 6061-T6511 (12ft) 1/4" - 20" BAR Rectangular: 5086-H111 (20ft) 3/16"-3/4"(t) x 1"- 6"(w) 5456-H111 3/16"-5/8"(t) x 1-1/2"-4"(w) 6061-T6511 (12ft) 1/8"- 4"(t) x 1/2"-12"(w) Square: 5086-H111 (14ft) 1-1/2" - 3" 6061-T6511 (12ft) 1/4" - 6" CHANNEL 5456-H T6 (25ft) 2" - 15" 6063-T52 (16ft) 3/4-3" ANGLE 5086-H111 (25ft) 1"x1"x1/8" - 6"x6"x1/2" 5456-H111 1"x1"x1/8" - 6"x6"x5/8" T6 (25ft) 1/2"x1/2"x1/16" - 8"x8"x1/2" T52 (16ft) 1/2"x1/2"1/8" - 3"x3"x1/4" SHAPES 5086-H111 Tee Bar (25ft) 1-1/2" - 9" 6061-T6 Hull Stiffener (25ft) 2" x 3" 6061-T6 Tee Bar (25ft) 1-1/2" - 4" 6063-T52 "G" Shape (25ft) 1-3/8" 6061-T6 Sch 40 Half Round Pipe & Tube (20ft) 2" - 3-1/2" 6061-T6 Pen Board (24 ft) 6061-T6 Pen Board Channel (24 ft) 6061-T6 Pen Board Stanchion (24 ft) PIPE Extruded Structural: (Sch 40, Sch 80) 6061-T6 (20 ft) 3/8" - 12" 6063-T52 (20 ft) 1/2" - 10" Drawn Seamless: (Sch 40, Sch 80) 5086-H32 (20 ft) 3/8" - 12" NOTE: rml = Random Lengths NOTE: t = thickness w = wall ALASKAN COPPER INVENTORY IS ADJUSTED TO SERVE THE NEEDS OF OUR CUSTOMERS. IF THE MATERIAL OR SIZE IS NOT LISTED HERE, PLEASE CALL, OR FAX FOR FURTHER INFORMATION.
3 ALLOYS 230, 260, 270, 356, 360, others available upon application and depending on shape Soft.025" -.090" Half-Hard.010" - 1" Shim Stock (6" x 100" CTNS).001" -.025" COIL (12" - 36" wide).005" -.025" ROUND ROD (12ft) Free Cutting Round 1/16" - 10" BAR (12ft) Rectangular ALUMINUM CONTINUED TUBING Square: 5086-H111 (20 ft) 1-1/2" - 3" (.250 w) 6061-T6 (20ft) 1" - 8" (.125"-.500" w) 6063-T52 (21 ft 1") 3/4" - 4" (.125 w) Rectangular: 5086-H111 (20 ft) 2" x 3" (.188" -.250" w) 6061-T6 (20 ft) 1"x1-1/2"-6"x 8"(.125"-.375" w) 6063-T52 (21 ft 1") 3/4" x 1-1/2" - 2" x 6" (.125" w) Round: 5086-H32 (20ft) 2" - 8" (.250" -.500" w) 6061-T6 (20 ft) 5/8" - 10" (.059" - 1" w) Threaded 1/8" - 4" Butt Weld 1/2" - 6" Flanges 6061-T6 1" - 12" BRASS 1/16" - 2" (thick) x 1/4" - 6" (wide) Hexagon 1/8" - 3-1/2" Square 1/8" - 3" Half Oval 3/32" x 3/8" - 3/8" x 2" Half Round 1/4" x 1/2" - 1/2" x 1" PIPE (12ft & 20ft) Standard (Sch 40) Red Brass C230 1/8" - 12" Extra Heavy (Sch 80) Red Brass C230 1/8" - 3" TUBING (12ft & 20ft) Round, Seamless Yellow Brass 1/8" - 4" OD (.065" wall) Round, Seamless Yellow Brass 3/4" /4" OD (.125" wall) Round, Polished Brass Bar Rail 1" - 2" (.050" wall) Threaded, Bronze, NPS Sizes 1/8" - 4" Polished Brass Bar Rail Inquire WIRE Soft Brass 1# & 10# Spools.016" -.081" ALLOYS BRONZE UNS number listed below Aluminum Bronze C " - 2" Naval Bronze C " - 3" Silicon Bronze C " - 1" ROUND ROD (12ft) Aluminum Bronze C /4" - 6" Aluminum Nickel Bronze C /8" - 8" Manganese Bronze C /4" - 6" Naval Bronze C /4" - 8" C /16" - 4-1/2" Phosphor Bronze C /4" - 6" Silicon Bronze C /4" - 3" BAR Rectangular Naval Bronze C46400 Sheared or Sawed from Plate Silicon Bronze C65500 Sheared or Sawed from Plate TUBING (20ft) Admiralty, Condenser C /8" - 3/4", THREADED Rough Bronze 1/8" - 4" FLANGES Rough Bronze 1/8" - 4" ANGLE, ARCHITECTURAL (12ft) C /2" x 1/2" x 1/16" - 3" x 3" x 1/4" WIRE CLOTH 36" x Coil 50 x 50 (.009") Insect Screen 36" - 48" x Coil 18 x 14 (.001") FASTENERS Ring Nail - Silicon Bronze 1" - 2-1/2" VALVES, BALL TYPE Ball Type, Threaded 1/4" - 3" Solder Type, Gate 3/8" - 2" Screwed Type, Gate 1/4" - 2" Check Type, Threaded 1/4" - 2" Globe Type, Threaded 1/4" - 2" BEARING BRONZE, SAE 660 C93200 Continuous Cast, Hollow 1/2" - 14" ID; (105" - 108" rml) 3/4" - 16" OD Solid, Round (105" - 108" rml) 1/2" - 10" (SAE841) Solid, Sintered 6-1/2" Long 1/2" - 3" NOTE: rml = Random Lengths ALASKAN COPPER INVENTORY IS ADJUSTED TO SERVE THE NEEDS OF OUR CUSTOMERS. IF THE MATERIAL OR SIZE IS NOT LISTED HERE, PLEASE CALL, OR FAX FOR FURTHER INFORMATION.
4 COPPER-NICKEL ALLOYS C C " - 6-1/4" " - 4" ROUND ROD (12ft rml) /4" - 10" /2" - 8" BAR Sheared or sawed from plate PIPE & TUBING (20ft) Seamless 70-30: Classes 200, 700, 1650, 3300, /4" OD " OD 90-10: Class 200, Sch 40 1/4" OD " OD Welded " OD - 24" OD " OD - 30" OD Condenser & (.049" &.065" wall) 1/4" OD - 1" OD Threaded: 150 LB, 3000 LB & 6000 LB 1/8" - 4" IPS Socket-Weld: 400 LB, 3000 LB & 6000 LB 1/8" - 4" IPS Butt Weld: NAVSEA & Commercial Sizes 1/4" - 24" IPS Weld Base Outlets 1/4" - 4" IPS Bosses: NAVSEA DWG /4" - 2" IPS FLANGES Military & ANSI Dimensions Classes 150, 300, ANSI B16.5 1/2" - 24" Class 250, NAVSEA DWG , MIL-F-20042, NAVSEA /2" - 24" Backing, Slip-On, Clad, Blind, Overlay, Composite. For OD or NPS Sizes 1" - 24" COPPER ALLOYS 101, 102, 110, 120, 122, Soft (6" - 48" wide).005" - 2" 1/8H TO 1/2H (12" - 48" wide).010" - 2" Electro Deposited (25" wide).0014" " Roofing (6" - 48" wide) 10, 12, 16, 20, 24, 32, 48 Ounce PATTERNED Barked 16 oz. (.021") Hammered 16 oz. (.021") COIL Electro-Deposited (25" wide).0012" " Soft (6" - 24" wide).005" " ROUND ROD (12ft) 1/8" - 6" BAR (12ft) Rectangular Bus Bar 1/16" - 2" (thick) x 1/2" - 6" (wide) Square 1/4" - 3" PIPE (20ft) Standard (Sch 40) 1/8" - 8" Extra Heavy (Sch 80) 1/8" - 8" TUBING (20ft) Soft in Coils (50ft & 60ft) 1/16" - 1" Hard Drawn 1/8" /4" Water Tubing, Types K, L, M 3/8" - 5-1/8" P.V.C. Coated, Soft 1/4" - 1/2" Solder Joint 1/4" - 4" WIRE Soft.010" " Hard.162" " ROOF DRAINAGE PRODUCTS Downspouts, Half-Round Gutters, Accessories 2" - 6" FASTENERS Common Nail 1" - 3" Slating Nail 1" - 3" NOTE: rml = Random Lengths PRE-PROCESSING SERVICES INCLUDE: COMPUTER-AIDED DESIGN AND LAYOUT Alaskan Copper utilizes state-of-art computer equipment for layout and optimization of material. Data may be input directly from customer supplied DXF (data exchange format) files via or disk. This system, which communicates directly with our hi-definition and standard plasma burning tables, offers maximum accuracy and efficiency in processing of cut plate orders. COIL CUT-TO-LENGTH Our on-site cut-to-length line provides quick turnaround of coil orders, allows flexibility in sheet/plate lengths and widths (up to 50 feet long, 96" wide & 3/8" thick) minimizes customer material and welding costs. Cut-to-length orders are also available with plastic or paper interleaving, vinyl covering on both sides, and line marking for easy identification. CUT PIECES Order the size and the shape that is needed, not just standard sizes. Complex shapes are cut by computerized plasma and router cutting tables. Carbide blade and abrasive saws are used for cutting thick materials (up to 8" thick). Precision shearing is available for cutting multiple parts to close tolerance. NON-STANDARD PLATE SIZES Automatic splice welding of sheet and plate produces special widths and lengths (up to 40 feet).
5 SHEET GAUGE CHARTS STAINLESS STEEL GAUGE* THICKNESS " " " " " " " " " " " 8.160" " 3/16" & Thicker is plate *Manufacturer's Standard Gauge ALUMINUM GAUGE* THICKNESS " " " " " " " ".125".160".190" Note: There is no official gauge standard for aluminum..250" & Thicker is plate *Brown & Sharpe's Gauge Standard B & S or American Gauge A.W.G. COPPER OUNCE THICKNESS GAUGE* " " " " " " " " " " " " " " " " & Thicker is plate *Birmingham Gauge Standard B.W.G. BRASS GAUGE* THICKNESS " " " " " " " " " " ".125" & Thicker is plate *Brown & Sharpe's Gauge Standard B&S or American Gauge A.W.G. ALUMINUM WEIGHT CHARTS SIZE ROUND SQUARE SIZE ROUND SQUARE 1/4" " /16" /16" /8" /4" /2" /2" /8" /4" /4" " /8" /8" 1" /4" /8" /2" /4" " /8" /8" 1-1/2" /4" /8" /2" /4" " " /2" /4" " /8" /2" /2" " /8" /2" /4" " " /2" /4" " /2" " /4" " 14" " " THICKNESS 5052-H H116/5086-H T6 SIZE 48" 60"+ 48" 60"+.025" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " INDUSTRIES SERVED Alaskan Copper & Brass Company has served a wide range of industries for the past 95 years. Industries such as pulp and paper, boatbuilding, shipbuilding and repair, chemical, petrochemical, water treatment, mining, power, food processing and many more, rely on Alaskan Copper for their supply of corrosion resistant metals.
6 STAINLESS STEEL WEIGHT CHARTS STAINLESS STEEL SHEET GAUGE DECIMAL EQUIVALENTS.1874".134".120".105".090".075".060".048".036".030".024".018".015" LBS/SQ FOOT SHEET SIZE SHEET WEIGHTS (LBS) 36" x 96" " x 120" " x 144" " x 96" " x 120" " x 144" " x " x 96" " x 120" " x 144" " x 240" " x 96" " x 120" " x 144" " x STAINLESS STEEL PLATE THICKNESS 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 2" DECIMAL EQUIVALENTS.187".250".312".375".500".625".750" 1.000" 1.250" 1.500" 2.000" LBS/SQ FOOT SHEET SIZE PLATE WEIGHTS (LBS.) 48" x 96" " x 120" " x 144" " x 240" " x 120" " x 144" " x " x 120" " x 144" " x " x 240" ALASKAN COPPER INVENTORY IS ADJUSTED TO SERVE THE NEEDS OF OUR CUSTOMERS. IF THE MATERIAL OR SIZE IS NOT LISTED HERE, PLEASE CALL, OR FAX FOR FURTHER INFORMATION.
7 STAINLESS STEEL WEIGHT CHARTS STAINLESS STEEL BAR SIZE LBS/FT ROUND SQUARE HEX 12 FT Random Lengths SIZE LBS/FT ROUND SQUARE HEX 1/8" " /16" /4" /4" /2" /16" /4" /8" " /2" /2" /16" " /8" /2" /4" " /8" /2" " " /8" /2" /16" " /4" " /16" " /8" " /16" " /2" " /8" /4" /8" " /16" /4" /16" /2" /4" STAINLESS STEEL ANGLE SIZE LBS/FT LBS/22FT 3/4" x 3/4" x 1/8" " x 1" x 1/8" /16" /4" /4" x 1-1/4" x 1/8" /16" /4" /2" x 1-1/2" x 1/8" /16" /4" " x 2" x 1/8" /16" /4" /8" /2" x 2-1/2" x 3/16" /4" /8" " x 3" x 1/4" /8" /2" " x 4" x 1/4" /8" /2" FT Random Lengths NOMINAL PIPE SIZE OUTSIDE DIAMETER STAINLESS STEEL FLAT BAR SIZE LBS/FT SIZE LBS/FT SIZE LBS/FT 1/8" X 1/2".213 1/4" x 2" /2" x 3" /8" /4" " /4" /2" " /8".372 3" " ".425 4" /2".638 5" /8" x 1" ".850 6" /4" " /2" " /8" x 1/2".636 2" " /4" /2" " " /16" x 1/2" /4" " /4" /2" ".638 2" /4" x 1" /4" /2" /2" /2".957 3" " " /2" /2" /2" " " " " " " " " " " /2" x 3/4" " x 1-1/2" " " /4" x 1/2" /4" /2" /4" /2" " ".850 2" " /4" /2" " /2" STAINLESS STEEL PIPE ANNEALED WELDED AND SEAMLESS - ASTM A 312 SCH 5s LBS/FT SCH 10s 12 FT Random Lengths LBS/FT SCH 40S LBS/FT SCH 80s NOTE: LBS/FT values are estimates for shipping purposes and may vary. LBS/FT 1/8".405" " ".32 1/4".540" " ".50 3/8".675" " " ".74 1/2".840".065" " " " /4" 1.05".065" " " " " 1.315".065" " " " /4" 1.660".065" " " " /2" 1.900".065" " " " " 2-3/8".065" " " " /2" 2-7/8".083" " " " " 3-1/2".083" " " " /2" 4".083" " " " " 4-1/2".083" " " " " 5-9/16".109" " " " " 6-5/8".109" " " " " 8-5/8".109" " " " " 10-3/4".134" " " " " 12-3/4".156" " " " ".156" " " " ".165" " " " ".165" " " " ".188" " " " ".218" " " " PLEASE CALL, OR FAX FOR FURTHER INFORMATION ON GAUGE OR SCHEDULE PIPE ASTM A 778 AND SEAMLESS OR WELDED TUBING ASTM A 249/A 269 AND A 778
8 FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE 1913 Alaskan Copper & Brass Company has been owned and operated by the same family since In our Seattle, Portland, San Diego and Vancouver distribution facilities, the emphasis has always been on personal service and long-term relationships with our customers. Our knowledgeable and friendly salespeople utilize one of the most sophisticated information systems in the metals industry to provide instantaneous access to an inventory of over 20,000 stocked items. ALASKAN COPPER & BRASS COMPANY SEATTLE LOCATION Mail Only PO Box 3546 Seattle, WA KENT LOCATION CORPORATE HEADQUARTERS nd Avenue South Kent, WA PORTLAND LOCATION 2440 SE Raymond Street Portland, OR SAN DIEGO LOCATION th Street, Suite A San Diego, CA Phone Fax acbsea@alaskancopper.com Phone Fax acbsea@alaskancopper.com Phone Fax acbpdx@alaskancopper.com Phone Fax acbsan@alaskancopper.com ALASKAN COPPER & BRASS COMPANY ALASKAN COPPER WORKS VANCOUVER, BC LOCATION 225 North Road Coquitlam, BC V3K 3V7 Phone Fax Toll Free acbvcr@alaskancopper.com STAINLESS PRODUCTS DIVISION th Avenue South Seattle, WA Phone Fax Toll Free acwspd@alaskancopper.com FABRICATION DIVISION th Avenue South Seattle, WA Phone Fax acwfab@alaskancopper.com PRODUCTS AND SERVICES AVAILABLE FROM ALASKAN COPPER & BRASS COMPANY AND ALASKAN COPPER WORKS MILL PRODUCTS CATALOG BOSSES AND WELDED OUTLETS COPPER ROOF DRAINAGE PRODUCTS COPPER-NICKEL PRODUCTS STAINLESS STEEL PIPING PRODUCTS FABRICATION DIVISION Copper, Brass, Bronze, Stainless Steel, and Aluminum Sheet, Plate, Coil, Pipe Tube, Rod, Bar, Fittings, Flanges and Extrusions Branch Outlets Available in Copper, Nickel, Nickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys Copper Gutters, Downspouts, Accessories and Roofing Copper-Nickel Sheet, Plate, Bar, Pipe, Tubing, Fittings and Flanges Stainless Steel and Other Corrosion Resistant Metal Pipe, Flanges and Fittings STEEL PIPING PRODUCTS Industrial Pipe, Valves & Fittings Corrosion Resistant Alloy Heat Exchangers, Pressure Vessels, Tanks, Columns, Special Fabrication and Prefabricated Piping Systems THESE DETAILED CATALOGS AND BROCHURES ARE AVAILABLE ON OUR WEBSITE: REV
Copper-Nickel Mill Products
Copper-Nickel Mill Products Copper-Nickel Rod, Sheet, Plate, and Tubing ALASKAN COPPER & BRASS COMPANY History W hen Alaskan Copper Works was founded as a marine coppersmithing company in 9, one of its
More informationNickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY
Bosses and Welding Outlets Branch Outlets in Copper-Nickel, Nickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY T he various Alaskan Copper and Brass Company
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationSTOCK LIST & BUYER S GUIDE
STOCK LIST & BUYER S GUIDE common Decimal equivalents 1/64 =.0156 1/32 =.0312 1/16 =.0625 3/32 =.0937 1/8 =.125 3/16 =.1875 7/32 =.2187 1/4 =.250 9/32 =.2812 5/16 =.3125 3/8 =.375 7/16 =.4375 1/2 =.500
More informationStainless Steel Section...
Structural & Decorative Tube Bar & Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationA.A.NAJJAR TRADING EST.
A.A.NAJJAR TRADING EST. Source of ferrous and non ferrous metals Page 1 ABOUT US We, serve to the requirements of various Industries such as Refineries, Oil & Gas Plants, Fertilizers, Power, Pharmaceuticals,
More informationSeamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationContents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More informationEROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS
MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M SPECIALTY COPPER ALLOYS FOR THE AEROSPACE INDUSTRY EROSPACE LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS NBM s corporate
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationStandard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
More informationSynergy THE O NEAL FAMILY OF COMPANIES
Synergy Family is synonymous with synergy at O Neal Industries (ONI). As part of the nation s largest family-owned group of metals service centers, each ONI company and each individual operation have the
More informationPerfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department
More informationpvc well casing & drop pipe
CertainTeed pvc well casing & drop pipe PVC Well Products Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due to its outstanding
More informationINDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
More informationSynergy THE O NEAL FAMILY OF COMPANIES
Synergy Family is synonymous with synergy at O Neal Industries (ONI). As part of the nation s largest family-owned group of metals service centers, each ONI company has the strength, backing, and unwavering
More informationJANUARY 1, 2015 AVAILABILITY LIST
JANUARY 1, 2015 AVAILABILITY LIST EXTREN Structural Shapes and Plate...2 Special Composite Shapes...4 DURADEK and DURAGRID Pultruded Grating...6 DURAGRATE Molded Grating...8 DURATREAD TM Molded Stair Tread
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationSECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
More informationMaterials. Estimating Steel. Players. Materials. Shop Drawings. Detailing Process. Standard shapes. Fabricated members, Built-up sections
Materials Standard shapes W sections, C channels, Structural T, Angles, Pipes, Tubes, Rods and Plates Fabricated members, Built-up sections Adding plates to beam flanges, Stiffeners to beam webs Built
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationCT-02 CABLE TRAY SYSTEMS
CT-02 CABLE TRAY SYSTEMS SYSTEMS THAT MAKE SENSE Introduction B-Line Systems was formed in 96 and has over 30 years experience manufacturing cable tray systems in which it has grown to become the industry
More informationProduct Catalog. Extreme Roofing, Inc. 2680 Rt. 982 Mammoth, PA 724.838.7695 www.extremeroofinginc.com
2012 Product Catalog Extreme Roofing, Inc. 2680 Rt. 982 Mammoth, PA 724.838.7695 www.extremeroofinginc.com 2 PH. 724.838.7695 Email. sales@extremeroofinginc.com Website. www.extremeroofinginc.com Fax.
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationPVC Pipe PVC SCHEDULE 40. Nominal Pipe Size (in.) 1/8. Average I.D. O.D.
CONDENSED CATALOG PVC HPB-0-A Effective 9//97 Revised //99 CLEAR / / / / -/ -/ -/ x/ CLEAR / / / / -/ PVC SDR. PSI (Water @ 7. F.) /.0.9.0.0 PVC SDR -/ -/ -/ 0 0 PVC SCHEDULE 0.0.7.0.00..7.7.00.000.00...
More informationROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
More informationHK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company.
HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. Based on superb and fair business relationships to long-standing
More informationTABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
More informationCarton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
More informationSECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationMueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
More informationDESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More information8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
More informationSIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is informative and is not part of the code.) A.1 General. To determine the size of piping used in a gas piping system, the following
More informationRubber Lining Application Manual Revision Date: September 1, 2009. Section 10: Pipe Lining Procedures Page: 10-1
Section 10: Pipe Lining Procedures Page: 10-1 GENERAL PROCEDURE FOR APPLYING RUBBER LINING TO PIPE 1. METAL SPECIFICATION Pipe should be fabricated in accordance with requirements found in RMA Bulletin
More informationStock & Reference Guide
Stock & Reference Guide Stock & Reference Guide Boyd Metals of Fort Smith 600 South 7th Street P.O. Bo 89 Fort Smith, rkansas 72902089 (479) 7829060 Fa (479) 7823980 Fa (479) 7820424 (800) 3238806 Boyd
More informationOGi Architectural Metal Solutions
SUNSHADE CATALOG 2009 A B O U T U S Corporate Headquarters - Operating in accordance with NAAMM standards, Ohio Gratings, Inc. began operations in Canton, Ohio in 1970 and expanded from 8,000 square feet
More informationvalve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.
valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationContents and Nomenclature
DX Coils Contents and Nomenclature Nomenclature... 1 Evaporator Coil Types EN... 2 EF... 2 ER... 2 EJ... 3 EK... 3 Evaporator Construction Connections... 4 Tubing... 4 Headers... 5 Tube Supports... 5 Coil
More informationDuctile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More informationChapter 73 Articles of iron or steel
Notes. Chapter 73 Articles of iron or steel 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationCADprofi Fast switching between symbols views/variants
12.03 Fast switching between symbols views/variants A possibility to quickly switch variants or views of symbols has been added to the program. Thanks to this user can easily change the selected symbol
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationEDD-401. Stationary Louver Dual Drainable Blade. Application and Design. Standard Construction
Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member and stationary horizontal blades to
More information2013 Edition. Flanged fittings 30"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61
30"-64" Ductile Iron industrial Applications, water & Wastewater 2 Table of Contents Flanged Fittings for Water 3 Flange Details 5 Flanged Fittings 6 90º and 45º Bend 6 22-1/2º and 11-1/4º Bends 7 Tees
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationModule 3: Sapa Extrusions Pipe, Tube and Hollow Products
Module 3: Sapa Extrusions Pipe, Tube and Hollow Products Overview: Sapa Extrusions Capabilities: Soft Alloy Custom and Standard Solid & Hollow Extrusions, Rod, Bar and Tubular Products Market focused on:
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More information5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationVoltage Loss Formula s
www.litz-wire.com HM Wire International Inc. Phone: 330-244-8501 Fax: 330-244-8561 Voltage Loss Formula s www.hmwire.com Voltage loss in a wire is synonymous to pressure loss in a pipe. Electric current
More informationSECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationORIFICE PLATES. CONCENTRIC BORE: For standard fluid conditions an Orifice Plate would have a centrally located orifice bore.
SUPERIOR PRODUCTS, INC. 20550 MADISON STREET, TORRANCE, CA 90503 ORIFICE PLATES MANUFACTURING STANDARDS: Superior Products manufactures Orifice Plates in strict accordance with the specifications of: AGA.,
More informationEuropean Welding Standards
European Welding Standards John Dyson 15 th March 2004 European Standards Harmonised Standards Not all EN Standards are Harmonised, only those that are considered to satisfy relevant ESRs in product directives.
More informationSTANDARD PROCEDURES FOR INSTALLATION OF METAL ROOF SYSTEMS
ROOFING APPLICATION STANDARD (RAS) No. 133 STANDARD PROCEDURES FOR INSTALLATION OF METAL ROOF SYSTEMS 1. Scope 1.1 This application standard has been developed to provide consistent information for the
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationAA Solar and Sun Power Plus
AA Solar and Sun Power Plus www.aasolar.co.nz www.sunpowerplus.co.nz -1- Contents Chapter Title Page 1 General information 3 2 Safety and Installer Responsibilities 4 3 Technical Specifications 5 4 Tools
More informationScrew Plug Immersion Heaters
Immersion Heaters Overview Immersion Heaters consist of hairpin bent tubular elements brazed or welded into a screw plug and provided with terminal enclosures for electrical connections. Immersion Heaters
More informationESFR DRY PENDENT SPRINKLER VK502 (K14.0) TECHNICAL DATA
December 19, 2013 Sprinkler 122j 1. DESCRIPTION Viking Early Suppression Fast Response (ESFR) Dry Pendent Sprinkler VK502 is a fast response fusible element type sprinkler designed for use in storage areas
More informationSTANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES
ROOFING APPLICATION STANDARD (RAS) No. 117 STANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES Scope 1.1.
More informationConsumables Accessories
Consumables Accessories Index Lapping / Polishing Lapping plates / Polishing plates / Supporting plates.... 3 Dressing rings... 4 Pressure plates 4 Ceramic pellets. 4 Rubber pads..... 5 Felt pads.... 5
More informationCarbon and stainless steel pipes/tubes for mechanical engineering and structural applications
Carbon and stainless steel pipes/tubes for mechanical engineering and structural applications ThyssenKrupp Materials Austria ThyssenKrupp Our service for you. The area of materials management is placing
More informationCity of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
More informationCHAPTER 74. Copper and articles thereof
NOTE : CHAPTER 74 Copper and articles thereof In this Chapter, the following expressions have the meanings hereby assigned to them: (a) Refined copper Metal containing at least 99.85 per cent. by weight
More informationValu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
More informationRING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
More informationROOF CONSTRUCTION Roof Styles Gable Roof Hip Roof Gambrel Roof
ROOF CONSTRUCTION The overall appearance of a building is greatly affected by the roof lines and the roofing materials. The designer has many standard designs to choose from and should be able to find
More informationSECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
More informationHALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
More informationfoot skylight) is enough to knock a worker off their feet. A 10 mph wind gust on a 5 x 6 skylight develops a wind force of 270 lbs.
Skylight Installation Instructions This document provides instruction and guidelines for installation of both curb mount (CM) and self flashing (SF) unit skylights on flat, pitched (> or equal to 3/12
More informationDSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More information