2 Copyright Notice ISBN: N/A Parallels 660 SW 39th Street Suite 205 Renton, Washington USA Phone: +1 (425) Fax: +1 (425) Copyright , Parallels, Inc. All rights reserved Distribution of this work or derivative of this work in any form is prohibited unless prior written permission is obtained from the copyright holder. Patented technology protected by U.S.Patents 7,328,225; 7,325,017; 7,293,033; 7,099,948; 7,076,633. Patents pending in the U.S. Product and service names mentioned herein are the trademarks of their respective owners.
3 Preface 3 Contents Preface 4 Typographical Conventions... 4 Feedback... 5 About This Guide 6 Becoming Familiar with Parallels Plesk Panel 7 Setting Up the Server 13 Simplifying Setup of User Accounts 34 Simplifying Setup of Domains and Web Sites 43 Creating User Accounts 48 Adding Reseller Accounts for Hosting Resellers Adding Client Accounts for End Users of Hosting Services Hosting Web Sites 59 Setting Up a Hosting Account for a Web Site Allowing a Site Owner to Log In to Control Panel Creating and Publishing a Site Creating and Publishing Web Sites Using Sitebuilder Publishing Sites Through FTP Publishing Sites Through Parallels Plesk Panel File Manager Publishing Sites Through SSH Connection Publishing Sites with Microsoft FrontPage Publishing Sites with Adobe Dreamweaver... 74
4 4 Preface Preface In this section: Typographical Conventions... 4 Feedback... 5 Typographical Conventions The following kinds of formatting in the text identify special information. Formatting convention Type of Information Example Special Bold Italics Monospace Items you must select, such as menu options, command buttons, or items in a list. Titles of chapters, sections, and subsections. Used to emphasize the importance of a point, to introduce a term or to designate a command line placeholder, which is to be replaced with a real name or value. The names of style sheet selectors, files and directories, and CSS fragments. Go to the QoS tab. Read the Basic Administration chapter. The system supports the so called wildcard character search. The license file is called license.key.
5 Preface 5 Preformatted Bold Preformatted What you type, contrasted with on-screen computer output. On-screen computer output in your command-line sessions; source code in XML, C++, or other programming languages. Unix/Linux: # cd /root/rpms/php Windows: >cd %myfolder% Unix/Linux: # ls al /files total Windows: >ping localhost Reply from : bytes=32 time<1ms TTL=128 Feedback If you have found a mistake in this guide, or if you have suggestions or ideas on how to improve this guide, please send your feedback using the online form at Please include in your report the guide's title, chapter and section titles, and the fragment of text in which you have found an error.
6 C H A P T E R 1 About This Guide This guide is intended to give administrators a practical introduction to Parallels Plesk Panel by explaining how to perform basic administrative tasks and configure your control panel for further use. It covers a straightforward Parallels Plesk Panel scenario to help you start working with the control panel immediately after the installation. For more information about Parallels Plesk Panel's functions, refer to Parallels Plesk Panel Administrator's Guide at Parallels Web site available in HTML and printable PDF formats: The Parallels Plesk Panel Administrator's Guide is also accessible from your control panel as context-sensitive help: to open it, log in to control panel and click the Help shortcut in the left navigation pane. For information about installing Parallels Plesk Panel components, see the Parallels Plesk Panel Installation Guide at Parallels Web site available in HTML and printable PDF formats: For frequently asked questions related to Parallels Plesk Panel and other Parallels products, visit the Parallels online knowledge base at
7 C H A P T E R 2 Becoming Familiar with Parallels Plesk Panel Parallels Plesk Panel is a hosting automation solution that gives you full control over the managed Web hosting servers and simplifies setup and management of user accounts, Web sites, and accounts. Parallels Plesk Panel effectively lowers the threshold for non-technical users to log in and self administer their virtual host account on your Web server. User accounts hierarchy of Parallels Plesk Panel is limited to five user levels: Server administrator account. Reseller accounts. These accounts are created for the customers who need to resell hosting services and host their own Web sites. Client accounts. These accounts are created for the customers who do not need to resell hosting services, but need to host Web sites. Domain administrator accounts. These accounts can be created to allow access to the Parallels Plesk Panel for site administrators. One domain administrator account per one site. user accounts. These accounts can be created to allow access to the Parallels Plesk Panel for users. Parallels Plesk Panel also allows site owners to host personal Web pages or small sites called Web users' personal pages. However, these accounts are considered sub accounts and are not given access to the control panel. Now let's log in to the control panel and perform initial configuration steps: 1 Log in to the Parallels Plesk Panel as administrator. Open your Web browser, and in the address bar, type your server's IP address. Parallels Plesk Panel requires that you access the control panel using a secure SSL connection, so you need to use the https prefix and specify the port 8443 to access the user interface. For example, where is your server's IP address. Note: After you set up a host name for your server, you will be able to access your Parallels Plesk Panel by host name instead of IP address. Click through the SSL warning and type the user name "admin" and the default password "setup" into the Username and Password boxes, respectively. If this is your first login to the control panel, use the default password "setup". Click Log In. 2 Accept the license agreement. Note that if you run Parallels Plesk Panel inside a Virtuozzo container, and the Offline management mode is switched off in the Virtuozzo Power Panel, then this license agreement is not shown.
8 8 Becoming Familiar with Parallels Plesk Panel Read the terms of the License Agreement and, if you agree to all the terms, select the I agree to the terms of this license agreement and Do not show it again check boxes. Click Accept. 3 Specify the following: a Under Preferences, specify the full host name for your server. This is a three-part name without WWW prefix, for example, host.example.com. b Under Default IP Address, select the primary IP address that you would like to use on your server. c Under Shared IP Addresses, specify which of the available IP addresses should be used for hosting Web sites. Select an IP address and click Shared >>. You can skip this step and define the type of IP addresses later (Home > IP Addresses). d Under Administrator's Preferences, enter the new password and confirm it in the New password and Confirm password boxes. The password can have up to 14 symbols. Note that the password is case sensitive. 4 Click OK. 5 Fill in administrator s contact information. 6 Click OK. The control panel opens and you see the administrator's Home page. It provides shortcuts to the most frequently performed operations. The top banner area provides access to the following functions: My account. This is where you can select a language and theme for your control panel and change your contact information.
9 Becoming Familiar with Parallels Plesk Panel 9 Switch user. This is where you can switch between user accounts. This shortcut is shown only when single sign-on technology is enabled on the server. Log out. This is where you close your session when you have finished working with control panel. The navigation pane on the left provides access to the following sets of functions: Search area. Use it when you need to find user accounts and domains hosted on your server. Home. This is where you start working with the control panel. Most of the operations you might need to perform are accessible from this area. Resellers. This is where you perform operations on reseller accounts. Resellers can use hosting services and resell the services to end users. Resellers cannot create reseller accounts for other users. You can accomplish the following tasks from this area of the control panel: Create, modify, remove user accounts for resellers and their customers (referred to as clients). Create, modify, remove reseller account templates. View traffic usage reports. Clients. This is where you perform operations on user accounts. Clients are end users of hosting services; they cannot resell hosting services. You can accomplish the following tasks from this area of the control panel: Create, modify, remove user accounts. Create, modify, remove user account templates (referred to as client account templates). View traffic usage reports. Domains. This is where you perform operations on Web sites. You can accomplish the following tasks from this area of the control panel: Add Web sites (set up DNS zones, configure Web hosting settings and resource usage limits), modify Web hosting settings, remove Web sites. Create, modify, remove Web site hosting templates (referred to as domain templates). Applications. This is where you select which applications will be available for installation on users' sites. Settings. This is where you configure and manage the server and program components used by Parallels Plesk Panel. Modules. This is where you manage the additional modules that extend Parallels Plesk Panel capabilities, such as Firewall, Game Server, VPN, and others. Master. This shortcut gives you access to centralized management of Parallels Plesk Panel-enabled servers. Global Account. This shortcut appears in your Parallels Plesk Panel when the single sign-on capabilities are switched on on the hosting server. Single sign-on technology allows you to log in to different Parallels products using a single global login name and password. This shortcut is used for changing the global login settings. Help Desk. This is the help desk system integrated with your control panel. You can use it to view and solve the problems reported to you by your customers.
10 10 Becoming Familiar with Parallels Plesk Panel Help. Provides context sensitive help with search function. To see information about a tool or an item on the page, hover the cursor over an item, without clicking it, and a small hover box appears with supplementary information regarding the item being hovered over. If you install the Sitebuilder component and configure it as described in the Parallels Plesk Panel 9 Administrator's Guide, section Enabling Integration with Sitebuilder, the following shortcuts are also shown in your control panel's navigation pane under the Sitebuilder Administration group: Desktop. This provides shortcuts to the task-oriented wizards. Here you can perform any operations on your account and Web sites through the Sitebuilder system. For more information, see ktop_interface.htm. Users. Here you can add and manage user accounts and service plans for your customers. For more information, see p_customers.htm. Sites. Here you can add and manage sites. For more information, see _sites.htm. Server. Here you can view and manage the following system settings: Trial Sites Settings. Here you can configure settings for trial sites created by your prospective customers. For more information, see _up_sitebuilder_wizard_for_anonymous_visits.htm Branding. Here you can configure the logo and title setting for your prospective customers. For more information, see _up_logo_and_title_bar_text.htm Notifications. Here you can configure settings for notifications sent by Sitebuilder to your users. For more information, see uring_ _message_sent_at_trial_site_publishing_attempt.htm. Modules. Here you can view the list of available modules. For more information, see g_and_configuring_sitebuilder_wizard_presets_and_modules.htm. Page Sets. Here you can view the list of available page sets. For more information, see g_and_configuring_sitebuilder_wizard_presets_and_modules.htm.
11 Becoming Familiar with Parallels Plesk Panel 11 Site Families. Here you can view the list of available templates that combine design templates and page sets. For more information, see g_and_configuring_sitebuilder_wizard_presets_and_modules.htm. The main working area on the right provides access to the tools available for the current section of the control panel selected in the navigation pane. Additional operations are accessible from drop-down menus that open when you click group titles. To navigate through Parallels Plesk Panel, you can use a path bar: a chain of links that appears in the right part of the screen, below the banner area. To the right of the path bar, there are Favorites and Visited Pages menus. The Visited Pages menu keeps the shortcuts to the recently visited control panel screens. These shortcuts are added automatically. The Favorites menu keeps the shortcuts to the screens that you manually add to favorites. For information about working with shortcuts in the Favorites menu, see the Parallels Plesk Panel 9 Administrator's Guide, section Customizing Your Home Page. To return to a previous screen, use the shortcuts in the path bar, or the Up Level icon in the upper-right corner of the screen. When changing settings for a user account, domain name, or account, you can quickly select another user account, domain name, or account whose settings you also want to change. To do this, click a small arrow icon located to the right of the user name, domain name, or address. This will open a list of user accounts, domain names or addresses that you can select.
12 12 Becoming Familiar with Parallels Plesk Panel To sort a list by a certain parameter in ascending or descending order, click on the parameter's title in the column heading. The order of sorting will be indicated by a small triangle displayed next to the parameter's title. Now proceed to the following chapter and set up your server.
13 C H A P T E R 3 Setting Up the Server To set the global settings for a Linux-based hosting server: 1 On your Home page, open the Server group title menu, and select Server Settings. 2 Specify the following: Button label length. To prevent lengthy button captions in languages other than English from overlapping in the control panel, you may want to specify a limit here. Any button caption longer than the defined limit will be shortened and ended with ellipsis (...). Prevent users from working with the control panel until interface screens are completely loaded. Leave this selected to avoid errors that might occur when users try to interact with control panel before is it ready. Administrator's interface language. Select the language for your control panel. Administrator's interface skin. Select the skin (theme) for your control panel. Home page preset. Once you customize the Home page and save the settings in a template as described in Parallels Plesk Panel 9 Administrator's Guide, section Customizing Your Home Page, you will be able to select your template here. For now, leave the default value selected. Allow multiple sessions under administrator's login. By default Parallels Plesk Panel allows multiple simultaneous sessions for several users logged in to the control panel using the same login and password combination. This can be useful when delegating management functions to other users or in case if you accidentally close your browser without logging out, thus becoming unable to log in again until your session expires. You may want to switch off this capability if you do not need it. Full host name. Apache restart interval. Any changes to hosting account settings made through control panel take effect only when Web server is restarted. By default, Web server is set to restart not more than once in every 15 minutes. This value is optimal for most cases, and we recommend leaving this default setting. Note that when there are no changes in hosting account settings, the Web server is not forced to restart. Web statistics and traffic usage statistics retention period. Specify how long the statistics should be kept on the server. Items that statistical utilities should count when calculating disk space and bandwidth usage. The option to forbid users from creating DNS subzones in other users' DNS superzones. We recommend that you select this option, otherwise, users will be able to create subdomains under domains belonging to other users, and set up Web sites and e- mail accounts which could be used for spamming or even phishing or identity theft. 3 Click OK. To set the global settings for a Windows-based hosting server: 1 On your Home page, open the Server group title menu, and select Server Settings.
14 14 Setting Up the Server 2 Specify the following: Full host name. Web statistics and traffic usage statistics retention period. Specify how long the statistics should be kept on the server. Items that statistical utilities should count when calculating disk space and bandwidth usage. The option to forbid users from creating DNS subzones in other users' DNS superzones. We recommend that you select this option, otherwise, users will be able to create subdomains under domains belonging to other users, and set up Web sites and e- mail accounts which could be used for spamming or even phishing or identity theft. 3 Click OK. Now, let's set up the DNS service for serving your own domains. Setup of DNS zones for newly added domains is automated: When you add a new domain name to control panel, a zone file is automatically generated for it in accordance with the server-wide DNS zone template and your server is instructed to act as a primary (master) DNS server for the zone. If the DNS service on your Parallels Plesk Panel server will be authoritative for Web sites that you host for your customers, and you do not want to set up your own domain at this moment, skip this procedure and move on to the next procedure for configuring the mail service. However, if you are going to set up in Parallels Plesk Panel a domain name for hosting a Web site for your own organization (let's call this domain "example.com"), follow these steps: 1 Register your domain name example.com with a domain name registrar (domain name registration authority) of your choice. Provide the registrar with the following information: nameservers ns1.example.com and ns2 example.com, and two IP addresses assigned to your server by your provider. 2 Log in to Parallels Plesk Panel, and click the Domains shortcut in the navigation pane. 3 Click Create Domain. 4 In the Domain name field, leave the WWW box selected, and type your domain name example.com. Having the www alias preceding a domain name will allow users to get to the site no matter what they type in their browsers: and example.com will both point to the same site. 5 From the Assign IP address menu, select the required IP address. You should select a dedicated IP address (not shared among other sites), or, in terms of Parallels Plesk Panel, exclusive IP address to be able to install an authentic digital SSL certificate for securing customers' communications to your hosting server. 6 In the Use domain template settings menu, leave the default domain value selected. To facilitate setup of new Web sites, the control panel uses settings inherited from domain templates. After your Web site is set up, you can replace the default settings with other settings that suit your needs better. 7 Under Switch on service, leave the Mail and DNS check boxes selected if accounts and DNS zones will be served by the mail and DNS services running on this server.
15 Setting Up the Server 15 8 Under Hosting type, select the Web site hosting option to host the Web site on this machine. 9 Specify the username and password that will be used for uploading site content over FTP. 10 Click Next >>. 11 Specify the following settings: SSL support. Secure Sockets Layer encryption is generally used for protecting transfer of sensitive data during online transactions on e-commerce Web sites that run on dedicated IP addresses. SSL certificates that participate in the encryption process are usually applied to a single domain name on a single IP address, therefore, each site that needs SSL protection must be hosted on a dedicated IP address. An exception to this is subdomains, which you can protect with a wildcard certificate. Installing an SSL certificate on a Web server that hosts several Web sites with different domain names on a single IP address (shared or name-based hosting) is technically possible, however, it is not recommended: the encryption will be provided, but users will get warning messages on attempt to connect to the secure site. To allow SSL encryption for this Web site, select the SSL support check box. Use a single directory for housing SSL and non-ssl content (available only for Linux hosting). By default, when you publish a site through your FTP account, you need to upload the Web content that should be accessible through secure connections to the httpsdocs directory, and the content that should be accessible via plain HTTP, to the httpdocs directory. For the convenience of publishing all content through a single location httpdocs directory on your FTP account, select the Use a single directory for housing SSL and non-ssl content check box. FTP login and FTP password. Specify the username and password that will be used for publishing the site to the server through FTP. Retype the password into the Confirm Password box. Hard disk quota (available only for Linux hosting). Specify the amount of disk space in megabytes allocated to the Web space for this site. This is the socalled hard quota that will not allow writing more files to the Web space when the limit is reached. At attempt to write files, an error message will show. Hard quotas should be enabled in the server's operating system, so if you see the "Hard disk quota is not supported" notice to the right of the Hard disk quota field, but would like to use the hard quotas on your server, log in to the server shell and run the quotaon -a command to enable the hard quotas. Access to server over SSH or Remote Desktop with FTP user's credentials. This allows you to upload securely Web content to the server through a Secure Socket Shell or Remote Desktop connection, however, allowing access to the server also poses a potential threat to the server security, so we recommend that you leave the Forbidden option selected.
16 16 Setting Up the Server Support for hosting services and scripting languages. Specify which of the following programming and scripting languages should be supported by the Web server: Active Server Pages (ASP), Server Side Includes (SSI), PHP hypertext preprocessor (PHP), Common Gateway Interface (CGI), Fast Common Gateway Interface (FastCGI), Perl, Python, ColdFusion, and Miva scripting required for running Miva e-commerce solutions. By default, PHP is configured to operate in safe mode with functional restrictions. To learn more about PHP safe mode, refer to Some web applications may not work properly with safe mode enabled: If an application on your site fails due to safe mode, switch the safe mode off by clearing the PHP 'safe_mode' on check box in the hosting account properties (Domains > domain name > Web Hosting Settings). Web statistics. To allow the Web site owner to view the information on the number of people visited his or her site and the pages of the site they viewed, select the statistics program from the Web statistics menu, and select the accessible via password protected directory /plesk-stat/webstat check box. This will install the statistics software of your choice, which will generate reports and place them into the password protected directory. The domain/web site owner will then be able to access Web statistics at the URL: using his or her FTP account login and password. Note: When you switch from one statistics program to another, all reports created by the previously used statistics program are deleted and new reports are created in accordance with the information read from log files kept on the server. This means that if you configured the system (at Domains > domain name > Log Manager > Log Rotation) so as to keep log files only for the last month, then Web statistics will be available only for the last month. Custom error documents. When visitors coming to the site request pages that the Web server cannot find, the Web server generates and displays a standard HTML page with an error message. If you wish to create your own error pages and use them on your Web server, select the Custom error documents check box. Additional write/modify permissions (available only for Windows hosting). This option is required if Web applications under a domain will be using a file-based database (like Jet) located in the root of httpdocs or httpsdocs folders. Please note that selecting this option might seriously compromise the Web site security. Use dedicated IIS application pool (available only for Windows hosting). This option enables the use of dedicated IIS application pool for Web applications on a domain. Using dedicated IIS application pool dramatically improves the stability of domain Web applications due to worker process isolation mode. This mode gives each Web site hosted on the server the possibility to allocate a separate process pool for execution of its Web applications. This way, malfunction in one application will not cause stopping of all the others. This is especially useful when you are using shared hosting package. 12 Click Next >>. 13 Specify the following settings:
17 Setting Up the Server 17 Overuse policy. Specify what should be done to the site when disk space and traffic limits are exceeded: To block the site, select the Overuse is not allowed option. To allow the site to operate, select the Overuse is allowed option. Leave the check box Notify the domain owner about reaching the resource limit selected if you want the control panel to notify you when the resource usage limit is reached. Disk space. Specify the total amount of disk space allocated to a hosting account associated with the domain. This amount is measured in megabytes. It includes disk space occupied by all files related to the domain/web site: Web site contents, databases, applications, mailboxes, log files and backup files. Traffic. Specify the amount of data in megabytes that can be transferred from the Web site during a month. Subdomains. Specify the number of subdomains that can be hosted under this domain. Domain aliases. Specify the total number of additional alternative domain names that can be used for this site. Web users. Specify the number of personal Web pages that can be hosted for other users under his or her domain. This service is mostly used in educational institutions that host non-commercial personal pages of their students and staff. These pages usually have web addresses like If you wish to allow execution of scripts embedded in personal Web pages, select also the Allow the web users scripting check box. For more information, refer to Parallels Plesk Panel 9 Administrator's Guide, section Hosting Personal Web Pages. Microsoft FrontPage accounts (only for Windows hosting). Specify the maximum number of additional Microsoft FrontPage accounts that can be created under the domain. FTP accounts (available only for Windows hosting). Specify the maximum number of additional FTP accounts that can be created under the domain. Mailboxes. Specify the number of mailboxes that can be hosted under this domain. Mailbox quota. Specify the amount of disk space in kilobytes that is allocated for storing messages and autoresponder attachment files to each mailbox under this domain. Mail redirects. Specify the number of mail forwarders that can be used in a domain. Mail groups. Specify the number of simple mailing lists that can be set up in a domain. Autoresponders. Specify the number of automatic responses that can be set up in a domain. Mailing lists. Specify the number of mailing lists that can run in a domain. Databases. Specify the number of databases that can be hosted under this domain. Databases quota (only for Windows hosting). Specify the maximum disk space amount in megabytes that MySQL and Microsoft SQL Server databases respectively can occupy under the domain.
18 18 Setting Up the Server ODBC connections (available only for Windows hosting). Specify the total number of ODBC connections that can be used under the domain. ColdFusion DSN connections (available only for Windows hosting). Specify the total number of ColdFusion DSN connections that can be used under the domain. Java applications. Specify the maximum number of Java applications or applets that the domain owner can install under a domain. Shared SSL links (available only for Windows hosting). Specify the total number of shared SSL links that can be used under the domain. Expiration date. Specify the term for the Web site hosting account. At the end of the term, the domain (Web site) will be suspended, its Web, FTP and mail services will no longer be accessible to the Internet users, and domain owner will not be able to log in to the control panel. Hosting accounts cannot be automatically renewed, therefore, in order to bring the hosted domain name (and Web site) back to operation, you will need to manually renew the hosting account: click the Domains shortcut in the navigation pane, click the domain name your need, click the Resource Usage icon, specify another expiration date, click OK, then click the Unsuspend icon (Domains > domain name > Unsuspend). 14 Click Finish. You are taken to the domain management screen. 15 Correct the information in the DNS zone of your domain: a Open the Web Site group title menu, and select DNS Settings. b Locate the records example.com NS ns.example.com and ns.example.com A <IP address>, select the respective check boxes and click Remove. Now the default records are removed, and you can specify the name servers that you have registered with your registrar. c Click Add Record. In the Record type menu, select the NS value, leave the Enter domain name box blank, and in the Enter nameserver box, type ns1.example.com, then click OK. d Click Add Record. In the Record type menu, select the NS value, leave the Enter domain name box blank, and in the Enter nameserver box, type ns2.example.com, then click OK. e f Click Add Record. In the Record type menu, select the A value, in the Enter domain name box, type the ns1 value, and in the Enter IP address box, type the first IP address of your server that you registered with a registrar, then click OK. Click Add Record. In the Record type menu, select the A value, in the Enter domain name box, type the ns1 value, and in the Enter IP address box, type the second IP address of your server that you registered with a registrar, then click OK. 16 Specify the correct name servers in the server-wide DNS template: a Click the Home shortcut in the navigation pane and then click DNS Settings. A list of record templates opens. b Locate the records <domain> NS ns.<domain> and ns.<domain> A <IP>, select the respective check boxes and click Remove. Now the default records are removed, and you can specify the name servers that you have registered with your registrar. c Click Add DNS Record. In the Record type menu, select the NS value, leave the Enter domain name box blank, and in the Enter nameserver box, type ns1.example.com, then click OK.
19 Setting Up the Server 19 Click Add DNS Record. In the Record type menu, select the NS value, leave the Enter domain name box blank, and in the Enter nameserver box, type ns2.example.com, then click OK. Now the server-wide DNS settings are set up properly, your domain example.com is hosted on the server, and you can publish the site content. For instructions on publishing a Web site, refer to the Publishing a Site section of this guide. Now, let's set up the mail service. Your control panel works in cooperation with mail server software, which provides mail services for your domains. After installation the mail server is configured automatically and is ready to serve, however, we recommend that you review the default settings to ensure that they satisfy your needs: 1 Click the Home shortcut in the navigation pane and then click Mail Server Settings. The server-wide mail preferences screen will open on the Preferences tab. 2 If you wish to limit the size of an message that can be sent through your server, type the desired value in kilobytes into the Maximum message size box, otherwise, leave this field blank. 3 If you wish to protect your users from dictionary attacks by not allowing them to use simple passwords, select the Check the passwords for mailboxes in the dictionary option. A dictionary attack is when someone tries to find out a valid user name and password by running a program that tries different combinations of dictionary words in different languages. Dictionary attacks can be successful because many users choose their passwords carelessly. Note for Windows hosting users: To make this function work properly on Windows platforms, make sure that the Password must meet complexity requirements option is switched on in your server's Local Security Policy settings (the option is located in Start > Administrative Tools > Local Security Policy > Account Policies > Password policy). 4 To protect your server against unauthorized mail relaying or injection of unsolicited bulk mail, select the Enable message submission check box to allow your customers to send messages through the port 587. Also notify your customers that they need to specify in their programs' settings the port 587 for outgoing SMTP connections, and be sure to allow connections to this port in your firewall settings. 5 Select the mail relay mode. With closed relay the mail server will accept only addressed to the users who have mailboxes on this server. Your customers will not be able to send any mail through your outgoing SMTP server, therefore, we do not recommend closing mail relay. With relay after authorization, only your customers will be able to receive and send through your mail server. We recommend that you leave the authorization is required option selected, and specify allowed authentication methods:
20 20 Setting Up the Server POP3 authorization. With POP3 authorization, once a user has successfully authenticated to the POP server, he or she is permitted to receive and send e- mail through the mail server for the next 20 minutes (default value). You can adjust this interval by specifying another value in the lock time box. SMTP authorization. With SMTP authorization, your mail server requires authorization if the message must be sent to an external address. Note for Windows hosting users: If you do not wish to use relay restrictions for networks that you trust, specify the network IP and mask in the Use no relay restrictions for the following networks: field (e.g., /16) and click the icon. To remove a network from the list, click the icon corresponding to the network you wish to remove. The relay hosts on the networks in the list are considered not to be potentially operated by spammers, open relays, or open proxies. A trusted host could conceivably relay spam, but will not originate it, and will not forge header data. DNS blacklist checks will never query for hosts on these networks. There is also an option to allow open relay without authorization, which, by default, is hidden from the user interface. Opening mail relay without authorization is not recommended because it allows spammers to send unsolicited mail through your server. If you want to set the open relay, log in to the server's file system, locate the file root.controls.lock in your Parallels Plesk Panel installation directory (PRODUCT_ROOT_D/var/root.controls.lock on Unix and PRODUCT_DATA_D/var/root.controls.lock on Windows platforms) and remove the line /server/mail.php3:relay_open from this file. The open relay option will show in your control panel. 6 If you are setting up a Linux-based server, select antivirus and webmail program components that should be available to the users. If you are setting up a Windows-based server, you can select webmail and antivirus later: click Settings in the navigation pane, and then click Select Webmail and Select Antivirus. 7 Select the mail account name format (available only on Linux hosting). Selecting the Use of short and full names is allowed option will allow users to log in to their mail accounts by specifying only the left part of address before sign (for example, username), or by specifying the full address (for example, To avoid possible authorization problems for users who reside in different domains but have identical user names and passwords, we recommend that you choose the Only use of full mail account names is allowed option. Once you have set your mail server to support only full mail account names, you will not be able to switch back to supporting short account names until you make sure there are no encrypted passwords for mailboxes and user accounts with coinciding user names and passwords residing in different domains. 8 Click OK to submit any changes.
SWsoft, Inc. Plesk 7.6 For Windows Client s Guide (Revision 2.1) (c) 1999-2006 ISBN: N/A SWsoft, Inc. 13755 Sunrise Valley Drive Suite 325 Herndon VA 20171 USA Phone: +1 (703) 815 5670 Fax: +1 (703) 815
SWsoft, Inc. Plesk 7.6 For Windows E-mail User Guide (Revision 1.0) (c) 1999-2006 ISBN: N/A SWsoft, Inc. 13755 Sunrise Valley Drive Suite 325 Herndon VA 20171 USA Phone: +1 (703) 815 5670 Fax: +1 (703)
Parallels Plesk Automation Customer s Guide Parallels Plesk Automation 11.5 Last updated: 17 March 2015 Contents Quick Start with Hosting Panel 4 Set Up Your First Website... 4 1. Create Your Site... 5
Fasthosts Customer Support Plesk 11 Manual This guide covers everything you need to know in order to get started with the Parallels Plesk 11 control panel. Contents Introduction... 3 Before you begin...
Parallels Panel Copyright Notice ISBN: N/A Parallels 660 SW 39th Street Suite 205 Renton, Washington 98057 USA Phone: +1 (425) 282 6400 Fax: +1 (425) 282 6444 Copyright 1999-2009, Parallels, Inc. All rights
Parallels Panel Copyright Notice ISBN: N/A Parallels 660 SW 39th Street Suite 205 Renton, Washington 98057 USA Phone: +1 (425) 282 6400 Fax: +1 (425) 282 6444 Copyright 1999-2009, Parallels, Inc. All rights
Fasthosts Customer Support Plesk 12 Manual This guide covers everything you need to know in order to get started with the Parallels Plesk 12 control panel. Contents Introduction... 3 Before you begin...
Parallels Plesk Panel Contents Preface 5 Typographical Conventions... 5 Feedback... 6 Getting Started after Migration from Small Business Panel 7 Differences between SBP and Panel 10... 7 Extended User
SWsoft, Inc. Plesk 8.0 for Linux/UNIX Domain Administrator s Guide Revision 1.1 (31 May 2006) (c) 1999-2006 ISBN: N/A SWsoft, Inc. 13755 Sunrise Valley Drive Suite 325 Herndon VA 20171 USA Phone: +1 (703)
Getting Started Guide Getting Started With Your Virtual Dedicated Server Setting up and hosting a domain on your Linux Virtual Dedicated Server using Plesk 8.0. Getting Started with Your Virtual Dedicated
Fasthosts Customer Support WHM Administrator s Guide This manual covers everything you need to know in order to get started with WHM and perform day to day administrative tasks. Contents Introduction...
Fasthosts Internet Parallels Plesk 10 Manual Introduction... 2 Before you begin... 2 Logging in to the Plesk control panel... 2 Securing access to the Plesk 10 control panel... 3 Configuring your new server...
Web24 Web Hosting Guide Welcome Dear Web24 customer, We would like to thank you for choosing Web24 as your preferred web hosting provider. To make your experience as enjoyable as possible, we have prepared
Customer Control Panel Manual Contents Introduction... 2 Before you begin... 2 Logging in to the Control Panel... 2 Resetting your Control Panel password.... 3 Managing FTP... 4 FTP details for your website...
Parallels Plesk Panel User Guide Page 1 of 31 Parallels Plesk Panel User Guide Table of contents Parallels Plesk Panel User Guide... 2 Table of contents... 2 Introduction... 3 Before you begin... 3 Logging
Getting Started Guide Getting Started With Your Dedicated Server Setting up and hosting a domain on your Linux Dedicated Server using Plesk 8.0. Getting Started with Your Dedicated Server Plesk 8.0 Version
Getting Started Guide Getting Started With Your Virtual Dedicated Server Setting up and hosting a domain on your Windows Server 2003 Virtual Dedicated Server using Plesk. Getting Started with Your Virtual
4. Client-Level Administration Introduction to Client Usage The Client Home Page Overview Managing Your Client Account o Editing Your Client Record View Account Status Report Domain Administration Page
Step 1 - Creating Your Administrative Account We presume that your Reseller account has been created. Here's how to create your Administrative account which you'll use to create your hosting plans, add
Getting Started Guide Parallels Plesk Panel 11 for your Linux server Getting Started Guide Page 1 Getting Started Guide: Parallels Plesk Panel 11, Linux Server Version 1.1 (11.1.2012) Copyright 2012. All
Working with Domains TM Control Panel User Guide Working with Domains 1 After you have selected a Subscription, you will need to add a Webspace for your domain. This will provide you with the ability of
Getting Started Guide Getting Started With Your Dedicated Server Setting up and hosting a domain on your Windows Server 2003 Dedicated Server using Plesk. Getting Started with Your Dedicated Server Version
Parallels Pro Control Panel Legal and Copyright Notice ISBN: N/A Parallels 660 SW 39 th Street Suite 205 Renton, Washington 98057 USA Phone: +1 (425) 282 6400 Fax: +1 (425) 282 6444 Copyright 2008, Parallels,
P l e s k H o s t i n g V P S An Introduction to Linux and Windows Plesk Hosting VPS Updated November 18, 2007 ISBN: N/A Web24 Pty Ltd 5a Harnett Close, Mulgrave Victoria, 3170 Australia Tel: +61 (1300)
Getting Started Guide Parallels Plesk Panel 11 for your Windows Server Getting Started Guide Page 1 Getting Started Guide: Parallels Plesk Panel 11, Windows Server Version 1.1 (11.1.2012) Copyright 2012.
Admin Guide Web Hosting (Windows Websites) MailStreet Hosting Control Panel (CP) DOCUMENT REVISION DATE: October, 2009 Web Hosting Admin Guide / Table of Contents Page 2 of 112 Table of Contents HOW TO
Getting Started Guide Getting Started With Your Virtual Dedicated Server Setting up and hosting a domain on your Linux Virtual Dedicated Server using Simple Control Panel. Getting Started with Your Virtual
Web Hosting Getting Started Guide This guide describes: - Hosting Terms and Definitions - How to sync a domain with your hosting account - How to change your domain s nameservers - How to use FTP to upload
Parallels Getting Started With Parallels Business Automation 4.4 Reseller's Guide Revision 1.0.18 (c) 1999-2008 ISBN: N/A Parallels 660 SW 39th Street Suite 205 Renton, Washington 98057 USA Phone: +1 (425)
PLESK 7 NEW FEATURES HOW-TO RESOURCES Copyright (C) 1999-2004 SWsoft, Inc. All rights reserved. Distribution of this work or derivative of this work in any form is prohibited unless prior written permission
Getting Started Guide Parallels Plesk Panel 9.2 for your Windows Server Getting Started Guide Page 1 Getting Started Guide: Parallels Plesk Panel 9.2, Windows Server Version 2.2 (1.6.2012) Copyright 2012.
Getting Started Guide Simple Control Panel for your Linux Server Getting Started Guide Page 1 Getting Started Guide: Simple Control Panel, Linux Server Version 2.1 (02.01.10) Copyright 2010. All rights
SWsoft, Inc. Counter-Strike Game Server Management Module Administrator's Guide ISBN: N/A SWsoft, Inc. 13755 Sunrise Valley Drive Suite 325 Herndon VA 20171 USA Phone: +1 (703) 815 5670 Fax: +1 (703) 815