PARALLEL SHAFT ø25 EJE CILINDRICO ø25
|
|
- Beverly Washington
- 7 years ago
- Views:
Transcription
1 MOTEURS HYDRAULIC MOTORS - MOTORES LENTOS MCPN MOTEUR Z-J HYDRAULIC ARBRE CYLINDRIQUE ø25 BRIDE SAE A - 2 TROUS Z-J HYDRAULIC MOTOR MOTOR Z-J HYDRAULIC Ø13. L PARALLEL SHAFT ø25 EJE CILINDRICO ø SAE A FLANGE -2 HOLES BRIDA SAE A - 2 ORIFICIOS Standard: ARBRE RENFORCE POUR CHARGES RADIALES - WITH NEEDLE BEARINGS FOR RADIAL LOADS - CON RODAMIENTOS PARA CARGAS RADIALES L1 3 A CLAPET ANTI-RETOUR INTEGRE BUILT-IN CHECK VALVES VALVULAS DE RETENCION INTEGRADAS PEINTURE NOIR BLACK PAINTED PINTADO NEGRO Ø.4 Ø2.5 max Ø91 T Ø2. Ø25 PREDISPOSITION POUR DRAINAGE MACHINED FOR DRAIN CONNECTION PREPARADO PARA DRENAJE Code Code Código MCP025CD0T MCP0CD0T MCP0CD0T MC-PN MC-PN MC-PN Type Type Tipo 25 CD CD CD cm 3 /tr cm 3 /rev cm 3 /giro 25 n. Max tour/min rpm giro/min M Max danm B Q MAX l/min Chute Drop Delta p P MAX bar Entrée Inlet En entrada Retour Return Retorno TRAVAILEN CONTINU - CONTINUOUS WORK - TRABAJO EN CONTINUO 10 2, * 1 3, * 00 4, * 4 A - B T L L1 kg MCPN0CD0 MCPN00CD0 MCPNCD0 MCPN5CD0 MCPN1CD0 MCPN0CD0 MCPNCD0 MCPN3CD0 MCPN0CD0 MC-PN CD MC-PN 0 CD MC-PN CD MC-PN 5 CD MC-PN 1 CD MC-PN 0 CD MC-PN CD MC-PN 3 CD MC-PN 0 CD 51,,,2 1,2,2 194,5 2,3 3,5 39, ,0,6 1,2 23,6,2,0 3,0 3,5, * 0 * 0 * 0 * 0 * 0 * 0 * 0 * 0 * 1/2 1/4 13,0 5, 0,5 10,5 5,0 3 13,0 5, ,0 6,00 1,0 6, 26,0 6, 162,0 6, 42,0 6,90 52,0, * = AVEC DRAINAGE - WITH DRAIN - CON DRENAJE PRESSION MAXI EN RETOUR SANSDRAINAGE MAX. RETURN PRESSURE WITHOUT DRAIN PRESION MAXIMA EN LINEA DE RETORNO SIN DRENAJE P bar continuous operations - intermittent operations rpm CHARGES ADMISSIBLES SUR L ARBRE PERMISSIBLE SHAFT LOADS CARGAS DEL EJE ADMISIBLE Arbre renforcé pour cherges radiales- With Needle bearings - Con rodaminentos para cargas radiales: "N" Prad dan 10 Prad = Charge radiale 00 Radial load Carga radial 10 2 Pa = Charge axiale 0 Axial load 1 3 Carga axial Charge radiale maxi sur l'arbre 1.Max radial shaft load 0 1.Carga radial máxima del eje 0 2. n= rpm 3. n=0 rpm 0 4. n=00 rpm mm Pa max=0 dan Pa max=0 dan 2
2 SERIES HYDRAULIC MOTOR series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weight. Characteristic features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or in series. * Advanced construction design, high power and low weight. Main Specification Technical data for with 25 and 1 in and 1 in splined and 2. tapered shaft Type W W W 0 W W 5 W 1 W 0 W W 3 W 0 Geometric displacement (cm 3 /rev.) Max. speed (rpm) Max. torque (N m) peak Max. output (kw) Max. pressure drop (MPa) peak Max. flow (L/min) Weight (kg) * Continuous pressure:max. value of operating motor continuously. * Intermittent pressure :Max. value of operating motor in 6 seconds per minute. * Peak pressure:max. value of operating motor in 0.6 second per minute. 9
3 Main Specification Technical data for with 31. and shaft Type Geometric displacement (cm 3 /rev.) Max. speed (rpm) Max. torque (N m) peak Max. output (kw) Max. pressure drop (MPa) peak Max. flow (L/min) Weight (kg) * Continuous pressure:max.value of operating motor continuously. * Intermittent pressure:max.value of operating motor in 6 seconds per minute. * Peak pressure:max.value of operating motor in 0.6 second per minute. 10
4 Performance Data 11 [cm 3 /rev.] [.cm 3 /rev.] [.2cm 3 /rev.] [51.cm 3 /rev.] Torque (N m) Speed (rpm) 9
5 Performance Data 5 [1.2cm 3 /rev.] [194.5cm 3 /rev.] [2.3cm 3 /rev.] [.2cm 3 /rev.] Torque (N m) Speed (rpm) 6
6 Performance Data 3 [3.5cm 3 /rev.] [.2cm 3 /rev.] Torque (N m) 234 Speed (rpm) 15 13
7 DIMENSIONS AND MOUNTING DATA MOUNTING Flange 2 PORT Flange 4 Flange H4/H5 Model L L Mounting Code D (depth) M (depth) S (depth) P (depth) R (depth) P(A,B) G1/2 () M22 x 1.5 () /- O-ring (1) 1/2-NPTF () PT(RC)1/2 () C 4-M (13) 4-M (13) 4-5/16-1UNC(13) 4-5/16-1UNC(13) 4-M (13) T G1/4 () M x 1.5 () /16-UNF () /16-UNF () PT(RC)1/4 (9.)
8 DIMENSIONS AND MOUNTING DATA MOUNTING O-ring Flange H2 G S P T R PORT B4 B5 PORT Flange H6 O-ring Flange H4/H5 Model L L Mounting Code G (depth) S (depth) P (depth) T (depth) R (depth) B4 (depth) B5 (depth) P(A,B) G1/2 () /- O-ring (1) 1/2-NPTF () 3/4-16 O-ring () PT(RC)1/2 () ø10 ø10 T G1/4 () /16-UNF () /16-UNF () /16-UNF() PT(RC)1/4 (9.) /16-UNF() G1/4() C 4-5/16-1UNC(13) 4-M(13)
9 SHAFT EXTENSIONS DIMENSIONS DATA Shaft A: Cylindrical shaft ø25 Parallel key xx Shaft B: Cylindrical shaftø Parallel key 10xx Shaft C: Cylindrical shaft ø25.4 Parallel key 6.x6.x31. Shaft E: Splined SAE 6B Shaft F: Splined -DP/24 Shaft G: Cylindrical shaftø31. Parallel key.x.x31. Motor Mounting Surface 16
10 SHAFT EXTENSIONS DIMENSIONS DATA Shaft T3: Cone-shaft ø31. Parallel key.x.x31. Tightening torque:0±10nm Shaft R:Cylindrical shaftø25.4 Parallel key 6.x6.x31. Shaft FD: Splined -DP/24 Shaft T: Cone-shaft ø2. Parallel key B5x5x Tightening torque:±10nm Motor Mounting Surface 1
11 SHAFT EXTENSIONS DIMENSIONS DATA Shaft K: Cylindrical shaftø25.4 Woodruff keyø25.4x6. Shaft H: Cylindrical shaft ø25.4 Pin hole ø10.3 Shaft S: Splined SAE 6B Shaft P: Cylindrical shaft ø25 Parallel key xx2 Shaft J: Cylindrical shaftø25 Parallel key xx Shaft I: Splined 13-DP16/ Motor Mounting Surface 1
12 SHAFT EXTENSIONS DIMENSIONS DATA Shaft A: Cylindrical shaft ø25 Parallel key xx Shaft H1: Cylindrical shaft ø25.4 Pin hole ø Shaft R: Cylindrical shaft ø25.4 Parallel key 6.x6.x31. Shaft D: Cylindrical shaft ø22.22 Parallel key 6.x6.x25.4 Shaft T2: Cone-shaft ø25.4 Parallel key ø25.4x6. Tightening torque:0±10nm Motor Mounting Surface 19
13 Series Hydraulic Motor Permissible shaft seal pressure In applications without drain line, output shaft seal exceeds a bit of the pressure in the return line. When applications use the drain line, the pressure of output shaft seal equals the pressure in drain line. Direction of shaft rotation: Standard When facing shaft end of motor,shaft to rotate: Clockwise when port "A" is pressurized. Counter-clockwise port "B" is pressurized. Status of the shaft's radial force
14 Order Information Pos Code Disp. Flange Output Shaft Port and Drain Port Rotation Direction Paint Unusually Function H4 H5 2-Ø13.5 Rhomb-flange, pilot Ø2.5 4-Ø13.5 Rhomb-flange, pilot Ø /-16 Square-flange, pilot Ø M10 Square-flange, pilot Ø A B C E R F FD G T T3 Shaft Ø25,parllel key xx Shaft Ø,parllel key 10xx Shaft Ø25.4,parllel key 6.x6.x31. Shaft Ø25.4,splined tooth SEA 6B Short shaft Ø25.4,parllel key6.x6.x31. Shaft Ø31.,splined tooth -DP/24 Long shaft Ø31.,splined tooth-dp/24 Shaft Ø31., parllel key.x.x31. Cone shaft Ø2.,parllel key B5x5x Cone shaft Ø31.,parllel key.x.x25.4 D M S P R G1/2 Manifold Mount 4 M, G1/4 M Manifold Mount 4 M, M 1.5 /- O-ring manifold 4x5/16-1UNC, /16-UNF 1/2- NPTF Manifold 4x5/16-1UNC, /16-UNF PT(Rc)1/2 Manifold 4xM, PT(Rc)1/4 R Standard Opposite 00 B S No paint Blue Black Silver grey N 0 F LS Standard Big radial force No case drain Free Running Low Speed Pos Code Disp. Flange Output Shaft Port and Drain Port Rotation Direction Paint Unusually Function H2 H6 H4 H5 2-Ø13.5 Rhomb-flange, pilot Ø Ø13.5 Rhomb-flange, pilot Ø /-16 Square-flange, pilot Ø M10 Square-flange, pilot Ø K S A R H H1 D I T2 P J Shaft Ø25.4, woodruff key Ø Shaft Ø25.4, splined tooth SEA 6B Shaft Ø25, parllel key Shaft Ø25.4, parllel key Shaft Ø25.4, pin hole Ø10.3 Shaft Ø25.4, pin hole Ø Shaft Ø22.22, parllel key Shaft Ø22.22, splined tooth 13-DP16/ Cone shaft Ø25.4, woodruff key Ø Shaft Ø25, parllel key 2 Shaft Ø25, parllel key G S P T R B4 B5 G1/2, G1/4 /- O-ring,/16-UNF 1/2- NPTF, /16-UNF 3/4-16 O-ring, /16-UNF PT(Rc)1/2,PT(Rc)1/4 Ø10 O-ring manifold 4x5/16-1UNC,/16-UNF Ø10 O-ring manifold 4xM, /16-UNF R Standard Opposite 00 B S No paint Blue Black Silver grey N 0 F LS Standard Big radial force No case drain Free Running Low Speed Note:When the table is used, please fill the code of left rows in dash area and give us, which the code information is consists of construction, displacement, mounting flange, output shaft and ports. If the specification is not in the table or you have specific requirements, please contact us.
15 W DIMENSIONS AND MOUNTING DATA Code Mounting P(A,B) T C Model W W0 W W5 W1 W0 W W3 W0 L L G (depth) S (depth) M (depth) G1/2 () G1/4 () 4 M10() /- O-ring (1) /16-UNF () 4 3/-16UNC() M () M 1.5 () 4 M10() Order Information W 5 6 Pos Unusually function Rotation Paint direction Code Flange Output shaft Port and drain port No paint 00 G1/2, G1/4 G Shaft Ø25k6,Parallel key A Standard W Blue Standard /- O-ring, S Shaft Ø25.4,Parallel key C Wheel-flange Big radial force N Opposite Shaft Ø25.4,Splined key SAE 6B Black B R /16-UNF E pilat Ø0.5 No case drain 0 Silver grey S M22 1.5,M 1.5 M Cone shaft Ø2.,Parallel key B5 5 T Note:When the table is used, please fill the code of left rows in the table and give us, which the code information is consists of construction, displacement, mounting flange, output shaft and ports. If the specification is not in the table or you have specific requirements, please contact us. 22
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationVariable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationHYDRAULIC MOTORS Concentric AB
HYDRAULIC MOTORS Concentric A Innovation in Hydraulics Introduction to Concentric Hydraulic Motor Capability Concentric offers one of the widest selections of gear pumps and hydraulic motors in the industry.
More informationA10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
More informationHYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION. Outstanding Hydraulic Products, Service and Expertise, Worldwide
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide Introduction to Haldex Hydraulic Motor Capability Haldex offers one of the widest selections
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationP2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US
P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 3 E0.17.0703.02.01 TM GEAR PUMPS AND MOTORS INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions -
More informationPVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
More informationFixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
More informationDual Path Mobile Pump
Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial
More information2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
More informationTable of Contents. M Series Variable Displacement Piston Pumps
Table of Contents M Series Variable Displacement Piston Pumps Introduction.... 3 Hydraulic System Design Calculations.... 4 Model Code Selection.... 5 Model Code Options.... 6 Specifications and Performance...
More informationDelta Power Company 4484 Boeing Drive - Rockford, IL 61109
INDEX Description Page Delta Power Rotary Flow Divider, Positive Displacement (Application Data) 36 P Series, Equal Flow Two Sections 39 P Series, Equal Flow Multi-Sections 40 PM Series, Equal Flow Multi-Sections
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi
More informationMobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6*M Denison Vane Technology, fixed displacement Contents GENERAL Series T6 Mobile, Denison Vane Pumps Features...3 Instructions...3 Minimum & maximum speeds...4 Pressure ratings...4
More informationInternal gear pump PGF Series 2X and 3X
Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise
More information1.Booklet. Hydraulic Motors. General Purpose MotorsR Series
.Booklet 1.Booklet Hydraulic Motors out 2 out 1.Booklet R Geroler Element... 11 Displacements... [15] ** 75 [20] * Speed... Up to 10 RPM Pressure Bar [PSI]... 125 [1800] Cont. 165 [2400] Inter. Torque
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationSeries PAVC Variable Displacement Piston Pumps zp01. Catalog HY28-2662-CD/US
Series PAVC Variable Displacement Piston Pumps zp1 Catalog HY28-2662-CD/US 1 Introduction Series PAVC Quick Reference Data Chart Pump Model Displacement CM 3 /REV (IN 3 /REV) Pump Delivery *Approx. Noise
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive
More informationROTARY GEAR FLOW DIVIDERS
ROTARY GEAR FLOW DIVIDERS Concentric AB Innovation + Technology = Sustainability GC and D Series Rotary Gear Flow Dividers Intensifier - Combiner (European and U.S. Versions) Field-proven Concentric Hydraulic
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationAxial Piston Fixed Displacement Motor A2FM
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Displacement Motor 2FM RE 91 001/07.05 1/36 Replaces: 11.04 Technical data sheet Series
More informationGoTo Europe Focused Delivery Program. Product overview industrial and mobile hydraulics
GoTo Europe Focused Delivery Program Product overview industrial and mobile hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times
More informationH1 Axial Piston Pump, Size 078, Single Technical Information Dimensions
Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24
More informationQ Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................
More informationHigh Pressure Gear Motors KM 1
High Pressure Gear Motors KM 1 2 KRACHT GmbH Gewerbestr. 2 58791 Werdohl, Germany fon +49()23 92/935- fax +49()23 92/935 29 mail info@kracht.eu web www.kracht.eu Construction 1 5 8 9 1 2 6 4 7 3 1 Housing
More informationPressure and flow control system
Pressure and flow control system RE 30030/04.09 1/32 Replaces: RE 30024/11.03 RE 30027/06.04 RE 30030/01.04 Type SYDFE1, SYDFEE, SYDFEC, SYDFEn Size 18 to 140 Component series 2X Maximum operating pressure
More informationVickers PVM Piston Pumps
Vickers PVM Piston Pumps 18-141cc 3 (1.1-8.6in 3 ) M-Series Industrial Variable Displacement M-Series Mobile Variable Displacement Table of Contents M Series Variable Displacement Piston Pumps Principles
More information"A" Series Variable Displacement Piston Pumps Single Pump, "OBE" Type Electro-Hydraulic Proportional Pressure & Flow Control Type
Single Pump, "OBE" Type Electro-Hydraulic Proportional & Flow Type Input Signal for Safety valve Input Signal for Flow Amplifier Proportional Solenoid Sensor Valve Piston (S Input Voltage L) Performance
More informationSeries 40 Axial Piston Motors. Technical Information
Series 40 Axial Piston Motors Technical Information Revisions Revisions Table of Revisions Date Page Changed Rev. April 2011 34, 36 correct system pressure gauge port 7/16-20 FE August 2010 last new back
More informationTruck Hydraulics. F1 F2 T1 VP1 PTO info Accessories. Fixed and Variable Displacement Pumps, Motors and Accessories. Catalogue HY17-8200/UK March 2004
Fixed and Variable Displacement Pumps, Motors and Accessories Catalogue HY17-8200/UK March 2004 F1 F2 T1 VP1 PTO info Accessories Conversion factors 1 kg 2.20 lb 1 N 0.225 lbf 1 Nm 0.738 lbf ft 1 bar 14.5
More informationRickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
More informationHMC Series Dual Displacement Staffa Motor
HMC Series Dual Displacement Staffa Motor Description The range of dual displacement motors extends from the HMC030 in 492cc/rev. to the HMC325 in 5326cc/rev. There are seven frame sizes as shown in the
More informationAxial Piston Variable Motor A6VM
Electric Drives and Controls Hydraulics Linear otion and ssembly Technologies Pneumatics Service xial Piston Variable otor 6V RE 91 604/05.06 1/76 Replaces: 06.03 Technical data sheet Series 6 Sizes Nominal
More informationGoTo Europe Focused Delivery Program. Product Overview Hydraulics
GoTo Europe Focused Delivery Program Product Overview Hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times have become an important
More informationSIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
More informationZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
More informationRexroth Hydraulic Pump A10VO Series User Manual
Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)
More informationVickers Vane Pumps Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment
Vickers Vane Pumps Single and Double Vane Pumps Model Series V10, V20, V2010, and V2020 for Industrial Equipment The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power
More informationVickers. Piston Pumps
Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3
More informationPLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE
20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories. parker.com/pmde
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories parker.com/pmde Pumps and Motors Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationBrueninghaus Hydromatik. Variable Displacement Pump A11VO RE 92 500/07.00. for open circuits
RE 92 500/07.00 Replaces: 03.97 Variable isplacement Pump A11VO for open circuits izes 40 260 eries 1 Nominal pressure 350 bar Peak pressure 400 bar A11VO Index Features 1 Ordering Code / tandard Program
More informationHydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
More informationPM10 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT
PM10 VRIBLE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM10 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM10 is a variable displacement, axial piston pump, with swashplate
More informationVane Pump & Motor Design Guide
Vickers Service Guide Vane Pump & Motor Design Guide For Mobile Equipment Revised 8/98 353 Introduction Over the past twenty years, the application of hydraulics in agricultural, construction and materials
More informationHidrolik Pompalar Hydraulic Pumps
25 GRUBU ÇİFT DÖNÜŞLÜ DİŞLİ POMP 25 GROUP BI-ROTTIONL GER PUMPS PTO mili saat yönünde (SĞ) The PTO shaft is CW rotating. PTO mili saatin tersi yönünde (SOL) The PTO shaft is CCW rotating. Giriş ve çıkış
More informationSeries 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
More informationAxial Piston Variable Pump KVA
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics ervice Axial Piston Variable Pump KVA E 92250/02.07 /16 eplaces: 04.06 echnical data sheet eries 6 izes 55... 107
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More informationVickers Vane Pumps V Series - Low Noise Vane Pumps. High Performance Intravane Pumps For Industrial Applications
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power
More informationPVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
More informationDesign and Modeling of Fluid Power Systems ME 597/ABE 591 Lecture 5
Systems ME 597/ABE 591 Lecture 5 Dr. Monika Ivantysynova MAHA Professor Fluid Power Systems MAHA Fluid Power Research Center Purdue University Displacement Machines Study different design principles and
More informationSingle- and Multi-circuit Pumps
Single- and Multi-circuit Pumps for Circulating and Hydrostatic Lubrication as Gear and Vane Pump Units, Reservoir Units Gear pump unit Multi-circuit pump The pump units specified in this leaflet are lubricant
More informationZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
More informationChar-Lynn Disc Valve Motors. Parts Information. 4000 Compact Series
Char-Lynn Disc Valve Motors Parts Information 4000 Compact Series Geroler Motors 00 Parts Drawing/List Displacement cm 3 /r [in 3 /r] 0 [ 9.8] 00 [.3] 50 [5.4] 305 [9.8] 395 [4.0] 490 [9.8] Drive, Main
More informationZF 85 IV. Marine Propulsion Systems
Marine Propulsion Systems 12 V-drive, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 389 522 3500 Light 365 489 3500 Medium 311 416 3500 Continuous 232 311 3200 ** Must not be
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 1 HYDRAULIC PUMPS The material needed for outcome 2 is very extensive so there
More informationZF 301 A. Marine Propulsion Systems
Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Description Robust design also withstands continuous duty in workboat applications. Fully works tested, reliable and simple to
More informationHigh Torque Vane Motors MV015, MV037, MV057, MV125
High Torque Vane Motors MV015, MV037, MV057, MV125 2 Unique vane crossing vane design provides maximum versatility This motor is created around the patented vane crossing vane design, a leading-edge concept
More informationZF 220 A 10 Down angle, direct mount marine transmission.
Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 419 562 4500 Light 394 528 4500 Medium 335 449 4500 Continuous 192 258 3200 ** Must not
More informationVickers Vane Pump & Motor Design Guide For Mobile Equipment
Vickers Vane Pump & Motor Design Guide For Mobile Equipment The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power of integrating the competencies of some of the world
More informationD.C. Motors. Products and specifications subject to change without notice.
D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationTransfer Gear Pumps KF 4... 80
Transfer Gear Pumps K 4... Contents Technical data Dimension sheets Page Contents Page Contents.......................... 2 Applications........................ 2 Descriptions....................... 3
More informationLSHT Torqmotors and Nichols Motors. Catalog No. HY13-1590-009/US,EU
LSHT Torqmotors and Nichols Motors Catalog No. HY13-159-9/US,EU WRNING FILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS ND/OR SYSTEMS DESCRIED HEREIN OR RE- LTED ITEMS CN CUSE DETH, PERSONL
More informationMACHINE TOOL SPINDLE DRIVE GEARBOXES MSD RAM-MSD
RX_GB_019_5:RAM - RAM MSD 1/07/2009 1:5 Page 2 MACHINE TOOL SPINDLE DRIVE GEARBOXES MSD RAM-MSD RX_GB_019_5:RAM - RAM MSD 1/07/2009 1:5 Page MSD & RAM-MSD REDEX ANDANTEX Spirit Overview - Products Range
More informationZF 286 A 7 Down angle, direct mount marine transmission.
Marine Propulsion Systems 7 Down angle, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 566 758 3300 Light 509 682 3300 Medium 380 509 3300 Continuous 345 463 3300 ** Must not
More information3097 en - 2013.06 / e. This manual is to be given to the end user POULIBLOC 2000-3000. Shaft mount reducer. Installation
097 en - 0.06 / e 8 en This manual is to be given to the end user POULIBLOC 000-000 Installation LEOY-SOME ISTALLATIO POULIBLOC 000-000 097 en - 0.06 / e This document complements the general instructions
More informationI.T. 6430. BSV-N series 25 ELECTROMECHANICAL TURRETS 09-08 TECHNICAL INFORMATION ISSUED
series 25 ELECTROMECHANICAL TURRETS TECHNICAL INFORMATION I.T. 643 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 9-8 WORKING PRINCIPLE Water-proof housing
More informationAxial Piston Variable Pump A10VSO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RE 92711/06.09 1/ Replaces: 10.07 and RE 92712/10.07 Data sheet eries 31
More informationZF 25. Marine Propulsion Systems
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Description Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. Suitable for high performance
More informationThe cylinder head bolts tightening stages have been updated as listed in Table 1.
NUMBER: 07 EPA04 MBE 4000-6 S.M. REF.: 1.2.2 ENGINE: MBE 4000 DATE: November 2007 SUBJECT: CYLINDER HEAD BOLTS TIGHTENING STAGES PUBLICATION: 6SE412 The cylinder head bolts tightening stages have been
More informationFP12 FERRA SERIES HEAVY DUTY GEAR PUMP
FP12 FERR SERIES HEVY DUTY GER PUMP Concentric B Innovation in Hydraulics DESIGNED FOR HEVY DUTY The FERR F12 pump is a rugged two-piece pump available with displacements from 16 to 41 cc/rev and pressures
More informationMachine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX
Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These
More informationECO 80 PRODUCT DESCRIPTION FEATURES. Power output S1 100% Adjustable air nozzle. Liquid cooling. Minimalmengenschmierung MMS retrofit
A PRODUCT DESCRIPTION Power output S6 40% Power output S1 100% Rotation speed Diameter Spindlehousing Spindle interface 3.0 kw 2.5 kw to 40.000 rpm 80 mm Stainless steel HSK - E25 FEATURES Adjustable air
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationAir cooled Diesel engines. 2.7-8.8 kw
Air cooled Diesel engines 2.7-8.8 kw KD15 / 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 models in the power range 2.7 to 8.8 kw. Particularly suited to small agricultur
More informationVariable Displacement Pump A7VO
rueninghaus Hydromatik Variable Pump 7VO eries 6, for open circuits axial tapered piston, bent axis design izes 55...60 Nominal Pressure 50 bar Peak Pressure 400 bar E 92202/07.95 E 92202/07.95 replaces
More informationVariable Displacement Pump A10VSO for open circuits
RE 92 711/09.00 RE 92 711/09.00 replaces: 03.00 Variable Displacement Pump A10VO for open circuits izes 28...140 eries 31 Nominal Pressure 280 bar Peak pressure 350 bar Axial Piston washplate Design A10VO...DR
More informationLSHT Torqmotors and Nichols Motors 110A Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 9 Displacements (3.6 24.1 in 3 /rev) 9 Schluckvolumen 59 395 cm 3 /rev 9 Cylindrée 9 Despazamientos Cont Int Maximum Pressure
More informationSELECTION GUIDE 2009
SELECTION GUIDE 2009 Selection Guide 2009 POCLAIN HYDRAULICS POCLAIN HYDRAULICS: DRIVING INNOVATION Poclain Hydraulics is the world leader in hydrostatic transmissions integrating our unique and patented
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More information