Committed to your success!
|
|
- Neal Barker
- 7 years ago
- Views:
Transcription
1 Committed to your success!
2 Listed by NSF 13 Series Threaded Stem 7 Series Expanding Adapter up to 160 lbs each G STEM G 19A : Bright zinc plated finish Hardened double ball bearing raceways 1/" diameter kingpin Standard /16" diameter axle with locknut 13 Series Threaded Stem: Mounting Stem Code Size STEM 3 1/"-13 x 1" STEM 1/"-13 x 1-1/" OPTIONS: VertiLoc brake; Add VL to end of model number (See brake photos on page 11) 7 Series Expanding Adapter: Tubing Tubing Mounting I.D. Mounting I.D. Code Size Code Size 9 3/" 17 B 1-3/ /8 19 C 1-3/ A 1-1/ 1 1-1/ /8 3 Type Threaded Stem 13 Series Expanding Adapter Model 7 Series Cushion / Solid Rubber Delrin /16 TPR / Poly Core Plain G G Hard / Solid Rubber Delrin /8 Polyolefin Plain Cushion / Solid Rubber Delrin /16 TPR / Poly Core Plain G -7-01G Hard / Solid Rubber Delrin Polyolefin Plain PolyLoc / Grey Delrin G -7-11G Cushion / Solid Rubber Delrin /16 TPR / Poly Core Plain G -7-01G Hard / Solid Rubber Delrin Polyolefin Plain PolyLoc / Grey Delrin G -7-11G Load Height Swivel Radius 1-1/8 3 /8 3/ 1-1/ /8 3 /16 1-7/8 /8 --01G PLT -6-01G PLT /6 Series Top Plate up to 160 lbs each /6 Series Top Plate 3 Suffix 1-3/ Number -3/ PLT 3-/8 /16 bolt holes 3 Swivel Plate Rigid Plate Type Series 6 Series Cushion / Solid Rubber Delrin /16 TPR / Poly Core Plain G G Hard / Solid Rubber Delrin /8 Polyolefin Plain Cushion / Solid Rubber Delrin /16 TPR / Poly Core Plain G -6-01G Hard / Solid Rubber Delrin Polyolefin Plain PolyLoc / Grey Delrin G -6-11G Cushion / Solid Rubber Delrin /16 TPR / Poly Core Plain G -6-01G Hard / Solid Rubber Delrin Polyolefin Plain PolyLoc / Grey Delrin G -6-11G Load Height Swivel Radius 1-1/8 3 3 / 3/ 1-1/ 3 / 3 /16 1-7/8 3 / WHEEL SELECTION: Cushion & HARD / Solid Rubber TPR / Poly Core POLYOLEFIN PolyLoc / Grey To order: Threaded Stem caster add mounting code (Example STEM 3). Expanding Adapter Stem caster add mounting code (Example ). Top plate caster add mounting code (Example PLT ). Toll Free:
3 30 Series Top Plate 36 Series Threaded Stem up to 3 lbs each : Bright zinc plated finish Hardened double ball raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Listed by NSF Top Plate Sizes (swivel & rigid): to order, add Plate Mounting Code to end of model number (Example: PLT1). 30 Series Bolt Hole Bolt Top Plate Size Mounting Code Spacing Size PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 3 3-1/8 x -1/8-3/8 x 3-7/16 /16 PLT 3-1/", ", " & 6" dia. only PLT 7 " dia. only 3-3/ x -1/ 3-1/ x 3-1/ -/8 x 3-/8 to 3 x 3 -/8 x -/8 to 3 x 3 3/8 9/3 36 Series Threaded Stem: Mounting Code Stem Number Size STEM 1/"-13 x 1" STEM 3 1/"-13 x 1-1/" STEM 6 /8"-11 x 1-1/" P PLT Threaded Stem sizes: to order, add Stem Mounting Code to end of model number (Example: STEM) GD STEM Type Swivel Plate 30 Series Threaded Stem 36 Series 1/ 1 1/ Cushion / Solid Rubber Hard / Solid Rubber Delrin Delrin / / / / / /16 Polyolefin Plain 10-1/ / /16 3 Cushion / Solid Rubber Delrin / 1 1/ Hard / Solid Rubber Delrin / Polyolefin Plain / Cushion / Solid Rubber HEAT FLAT* Delrin SS BALL / / /-30-13RTF 3-1/-36-13RTF -3/16 HEALTh SS BALL 3-1/-30-13MF 3-1/-36-13MF -3/16 3 1/ 1 1/ Hard / Solid Rubber Delrin / / Polyolefin Plain 0 3-1/ / /16 TPR / Flat* Ball 0 3-1/-30-13GF 3-1/-36-13GF -3/16 PolyLoc / BLUE Ball 0 3-1/-30-13P 3-1/-36-13P -3/16 PolyLoc / Grey Delrin 0 3-1/-30-31G 3-1/-36-31G -3/16 Cushion / Solid Rubber Delrin /8 Hard / Solid Rubber Delrin /8 HEAT FLAT* SS BALL RTF RTF -1/ HEALTh SS BALL MF MF -1/ 1 1/ PolyLoc / BLUE Ball P P -1/ PolyLoc / Grey Delrin G G -1/ Polyolefin Plain / TPR / Flat* Ball GF GF -1/ PHENOLIC PLAIN / 1 1/ Cushion / Solid Rubber Delrin / HEAT FLAT* SS BALL RTF RTF 3 HEALTh SS BALL MF MF 3 Hard / Solid Rubber Delrin / PolyLoc / Blue Ball P P 3 PolyLoc / Grey Delrin G G 3 Polyolefin Plain TPR / Flat* Ball GF GF 3 PHENOLIC PLAIN Cushion / Solid Rubber Delrin /8 TPR / Round Ball GD GD 3-3/ 1 1/ PolyLoc / Grey Delrin G G 3-3/ PolyLoc / Blue BALL P P 3-3/ 6 HEAT FLAT SS BALL rTF RTF 3-3/ HEAlTH SS Ball MF MF 3-3/ Polyolefin Plain / PHENOLIC Plain / Load Height (Plate) Load Swivel Height Radius (Threaded) 3 /8 3 7/16 3/ 1/8 3 1/16 3 /8 7/16 3 1/ 1/8 1/16 3 1/ 6 1/ 6 1/16 7 1/ 7 1/16 1/ *Round tread wheels available for TPR and Heat. Consult factory for temperature range and weight capacity on Heat wheels. To order use wheel code: TPR=13GD, Heat=13RTR. To order rigid top plate caster change 30 to 31 mounting code (Example -1/ PLT ). CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE PHENOLIC Heat Flat or Round Health Antimicrobial Toll Free:
4 Listed by NSF 3/0 Series Stems up to 3 lbs each : Bright zinc plated finish Hardened double ball bearing swivel raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Round - Spring Ring Stem: Mounting Stem Code Size STEM 3.8 dia. x -3/16" STEM.86 dia. x -3/16" Square - Spring Ring Stem: Mounting Stem Code Size STEM sq. x -3/16" STEM 7.87 sq. x -1/" w/ holes -3-13GD STEM G 19A Adapter Kit Parts Knurled Nut Rubber Bushing Plastic Bushing Base Washer Rubber Expanding Adapters Adapter Number ID of Round or Square Tube 9 3/ * 7/ / B 1-3/ C* 1-3/ A 1-1/ / *Stainless Steel knurled nut and base washer. Tube Size Range Type Spring Ring 3 Series Expanding Adapter Model 0 Series Load Height (Threaded) Swivel Radius Cushion / Solid Rubber Delrin / /-0-10 HEAT FLAT* SS BALL 3-1/-3-13RTF 3-1/-0-13RTF -3/16 HEALTh SS BALL 3-1/-3-13MF 3-1/-0-13MF -3/16 3 1/ 1 1/ Hard / Solid Rubber Delrin / / Polyolefin Plain 0 3-1/ / /16 7/16 3 1/ TPR / Flat* Ball 0 3-1/-3-13GF 3-1/-0-13GF -3/16 PolyLoc / BLUE Ball 0 3-1/-3-13P 3-1/-0-13P -3/16 PolyLoc / Grey Delrin 0 3-1/-3-31G 3-1/-0-31G -3/16 Cushion / Solid Rubber Delrin /8 Hard / Solid Rubber Delrin /8 HEAT FLAT* SS BALL RTF -0-13RTF -1/ HEALTh SS BALL MF -0-13MF -1/ 1 1/ PolyLoc / BLUE Ball P -0-13P -1/ 1/16 3 1/ PolyLoc / Grey Delrin G -0-31G -1/ Polyolefin Plain / TPR / Flat* Ball GF -0-13GF -1/ PHENOLIC PLAIN / Cushion / Solid Rubber Delrin / HEAT FLAT* SS BALL RTF -0-13RTF 3 HEALTh SS BALL MF -0-13MF 3 Hard / Solid Rubber Delrin / 1 1/ PolyLoc / Blue Ball P -0-13P 3 6 1/16 PolyLoc / Grey Delrin G -0-31G 3 Polyolefin Plain TPR / Flat* Ball GF -0-13GF 3 PHENOLIC PLAIN *Round tread wheels available for TPR and Heat. Consult factory for temperature range and weight capacity on Heat wheels. To order use wheel code: TPR=13GD, Heat=13RTR. To order add mounting code (Example 3-1/-3-10-STEM3). WHEEL SELECTION: CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE PHENOLIC Toll Free: Heat Flat or Round Health Antimicrobial
5 3 Series Adjustable Load Height Casters up to 3 lbs each : STEM -VL Adjustable load height casters allow you to level your equipment on uneven kitchen floors Bright zinc plated finish Hardened double ball bearing swivel raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Listed by NSF Tapped Hole Mounting Code Stem Size STEM 1-1/" x " with 3/" -10 tapped hole STEM 6 1-/8" x -1/8" with 3/"-10 tapped hole Type Adjustable Height Model 3 Series Cushion / Solid Rubber Delrin /8 Hard / Solid Rubber Delrin /8 HEAT FLAT* SS BALL RTF -1/ HEALTh SS BALL MF -1/ 1 1/ PolyLoc / BLUE Ball P -1/ PolyLoc / Grey Delrin G -1/ Polyolefin Plain / TPR / Flat* Ball GF -1/ PHENOLIC PLAIN / Cushion / Solid Rubber Delrin / HEAT FLAT* SS BALL RTF 3 HEALTh SS BALL MF 3 Hard / Solid Rubber Delrin / 1 1/ PolyLoc / Blue Ball P 3 PolyLoc / Grey Delrin G 3 Polyolefin Plain TPR / Flat* Ball GF 3 PHENOLIC PLAIN Load Height (Threaded) *Round tread wheels available for TPR and Heat. Consult factory for temperature range and weight capacity on Heat wheels. To order use wheel code: TPR=13GD, Heat=13RTR. To order add mounting code (Example STEM ). Swivel Radius Adjustable 3 1/ Adjustable Adjustable load height stem caster especially designed for food service equipment. Ring on stem marks maximum adjustment height when mounted on threaded stem equipment leg. WHEEL SELECTION: CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE Toll Free: PHENOLIC Heat Flat or Round Health Antimicrobial
6 Listed by NSF 36 Series Adjustable Load Height Casters up to 3 lbs each : SATP PLT Special caster has adjustable load height of 7 3 / to 9 1 / Height adjustment is achieved by turning the stem until the desired height is reached, then stem locks in place with a set screw. Bright zinc plated finish Hardened double ball bearing swivel raceways 1/ diameter kingpin Dust cover protects swivel bearings Standard 3/8 diameter axle with locknut OPTIONS: VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) Mounting Top Plate Size Bolt Hole Mounting Code Spacing Bolt Size PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 7 3-1/ x 3-1/ -/8 x -/8 to 3 x 3 9/3 To order: Add mounting code (Example SATP PLT ). Special food service caster has adjustable load height of 7 3 / to 9 1 /. Height adjustment is achieved by turning the stem until the desired height is reached. Stem locks in place with a set screw. 1 1 /" Adjustable Type Add mounting code (Example SATP PLT ). Adjustable Height Model 36 Series Load Height Swivel Radius 3 1 1/ Polyolefin Plain SAPT -1/ Adjustable 3 1 1/ Polyolefin Plain SAPT -3/8 Adjustable 3 1/ 1 1/ Polyolefin Plain SAPT -3/ Adjustable WHEEL SELECTION: Standard stocking wheel is polyolefin. These wheels also available as special order, consult Jarvis. CUSHION / SOLID RUBBER HARD / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / POLYLOC / GREY BLUE PHENOLIC 6 Toll Free: Heat Flat or Round Health Antimicrobial
7 -S30-13WH S30 Series Stainless Steel Top Plate up to 3 lbs each : Polished 30 Stainless steel finish Double ball bearing swivel raceways Grease sealed raceways with zerk 1/ diameter kingpin Stainless 3/8 diameter axle with locknut OPTIONS: Black and white polyolefin wheels available- For white polyolefin wheels add WH after 13 (Example: -S30-13WH) VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) S30/31 Top Plate Sizes (swivel & rigid): to order, add Mounting. Code to end of model number (Example: PLT ). Mounting Top Plate Size Bolt Hole Mounting Code Spacing Bolt Size PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 3-3/ x -1/ -/8 x 3-/8 to 3 x 3 3/8 Listed by NSF -S31-31GF 1 1/ Type Swivel Caster S30 Series Rigid Caster S31 Series TPR / Round Delrin 0 -S30-31GD -S31-31GD -1/ TPR / Flat Delrin 300 -S30-31GF -S31-31GF -1/ Polyolefin SS Sleeve 300 -S S / PolyLoc / Grey Delrin 300 -S30-31G -S31-31G -1/ Heat Flat 1 SS Ball 300 -S30-13RTF -S31-13RTF -1/ Health SS Ball 300 -S30-13MF -S31-13MF -1/ Phenolic SS Sleeve 300 -S S / Hi-Temp Resin PLain 300 -S30-1HT -S31-11HT -1/ TPR / Round SS Ball 0 -S30-13GD -S31-13GD -3/ Polyolefin SS Sleeve 300 -S S / 1 1/ Welded Disc / polyurethane SS Sleeve 300 -S30-113P -S31-113P -3/ PolyLoc / Grey SS BALL 300 -S30-13G -S31-13G -3/ Heat Flat 1 SS Ball 300 -S30-13RTF -S31-13RTF -3/ Health SS Ball 300 -S30-13MF -S31-13MF -3/ TPR / Flat Delrin 3 -S30-13GF -S31-13GF -3/ Hi-Temp Resin Plain 3 -S30-1NHT -S31-NHT -3/ Phenolic SS Sleeve 300 -S S / TPR / Round Delrin S30-31GD 6-S31-31GD 3-1/ 6 1 1/ Polyolefin SS Sleeve S S / PolyLoc / Grey 1 SS Ball S30-13G 6-S31-13G 3-1/ Heat Flat SS BALL 3 6-S30-13RTF 6-S31-13RTF 3-1/ Health SS BALL 3 6-S30-13MF 6-S31-13MF 3-1/ Phenolic SS Sleeve S S / 1Delrin bearing also available, consult factory. Heat round treads also available, change RTR to RTF. Load Height Swivel Radius 1/16 3 1/ 6 1/8 7 3/16 1/ WHEEL SELECTION: CUSHION / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / GREY Heat Flat or Round Health Antimicrobial WELDED DISC POLYURETHANE Toll Free:
8 Listed by NSF S3/S36/S0 Series Stainless Steel Stem Casters up to 3 lbs each -S3-1G : Polished 30 stainless steel finish Double ball bearing swivel raceways Grease sealed raceways with zerk 1/ diameter kingpin Stainless 3/8 diameter axle with locknut -S36-13 OPTIONS: Black and white polyolefin wheels available- For white polyolefin wheels add WH after 13 (Example: -S30-13WH) VertiLoc brake; Add VL to end of number PosiLoc brake; Add PL to end of number (See brake photos on page 11) S3 Spring Ring standard size is.8 diameter x -3/16 long. No mounting code necessary. -S0-1GD 19A Adapter Kit Parts Knurled Nut Rubber Bushing Plastic Bushing Base Washer S36 Threaded Stem standard size 1/ diameter 13 x 1-1/ long. Other sizes available. S0 Rubber Expanding Adapters Adapter Number ID of Round or Square Tube 9 3/ * 7/ / B 1-3/ C* 1-3/ A 1-1/ / *Stainless Steel knurled nut and base washer. Tube Size Range Type Spring Ring Stem Model S3 Series Threaded Stem Model S36 Series Expanding Adapter Model S0 Series TPR / Round Delrin 0 -S3-31GD -S36-31GD -S0-31GD -1/ TPR / Flat Delrin 300 -S3-31GF -S36-31GF -S0-31GF -1/ 1 1/ Polyolefin SS Sleeve 300 -S3-13 -S S / PolyLoc / Grey Delrin 300 -S3-31G -S36-31G -S0-31G -1/ Heat Flat 1 SS Ball 300 -S3-13RTF -S36-13RTF -S0-13RTF -1/ Health SS Ball 300 -S3-13MF -S36-13MF -S0-13MF -1/ Phenolic SS Sleeve 300 -S3-11 -S S / Hi-Temp Resin PLain 300 -S3-1HT -S36-11HT -S0-11HT -1/ TPR / Round SS Ball 0 -S3-13GD -S36-13GD -S0-13GD -3/ Polyolefin SS Sleeve 300 -S3-13 -S S / 1 1/ Welded Disc / polyurethane SS Sleeve 300 -S3-113P -S36-113P -S0-113P -3/ PolyLoc / Grey SS BALL 300 -S3-13G -S36-13G -S0-13G -3/ Heat Flat 1 SS Ball 300 -S3-13RTF -S36-13RTF -S0-13RTF -3/ Health SS Ball 300 -S3-13MF -S36-13MF -S0-13MF -3/ TPR / Flat Delrin 3 -S3-13GF -S36-13GF -S0-13GF -3/ Hi-Temp Resin Plain 3 -S3-1NHT -S36-NHT -S0-NHT -3/ Phenolic SS Sleeve 300 -S3-11 -S S / TPR / Round Delrin S3-31GD 6-S36-31GD 6-S0-31GD 3-1/ 6 1 1/ Polyolefin SS Sleeve S3-1 6-S S / PolyLoc / Grey 1 SS Ball S3-13G 6-S36-13G 6-S0-13G 3-1/ Heat Flat SS BALL 3 6-S3-13RTF 6-S36-13RTF 6-S0-13RTF 3-1/ Health SS BALL 3 6-S3-13MF 6-S36-13MF 6-S0-13MF 3-1/ Phenolic SS Sleeve S S S / 1Delrin bearing also available, consult factory. Heat round treads also available, change RTR to RTF. Load Height Swivel Radius 1/16 3 1/ 6 7 1/16 1/ WHEEL SELECTION: CUSHION / SOLID RUBBER ADVANTAGE TPR / FLAT AND ROUND POLYOLEFIN POLYLOC / GREY Heat Flat or Round Health Antimicrobial WELDED DISC POLYURETHANE 8 Toll Free:
9 -130- PlT 130 Series Top Plate up to 00 lbs each : Heavy gauge cold rolled steel, formed for strength and heat treated. Dust Cap protects swivel raceway bearings and improves performance. Bright zinc plating to resist rust and corrosion. Swivel Construction: double ball bearing with hardened raceways. sizes 3, and use 3/8 dia axle. sizes 6 and 8 use 1/ diameter axle. King Pin: 1/ steel rivet Fork Leg Spacing: OPTIONS: VertiLoc brake; Add VL to end of number (See brake photos on page 11) Swivel Grease Seal: Includes zerk grease fitting in dust cap. To order, add GS to end of model number. Optional Plate Sizes: variety of plate sizes available consult factory. Listed by NSF GF PlT 130/131: Top Plate Sizes (swivel & rigid): to order, add Plate Mounting Code to end of model number. (Example: PLT ) Mounting Top Plate Size Bolt Hole Mounting Code Spacing Bolt Size PLT 1-3/8 x 3-/8 1-3/ x 3 1/ PLT -3/8 x 3-/8 1-3/ x 3 /16 PLT 3 3-1/8 x -1/8-3/8 x 3-7/16 /16 PLT x 3 x 3 3/8 PLT 3-3/ x -1/ -/8 x 3-/8 to 3 x 3 3/8 PLT 7 3-1/ x 3-1/ -/8 x -/8 9/3 Swivel Caster Rigid Caster Type Load Swivel Height Radius 130 Series 131 Series /16 Polyolefin Roller / 3/8 Cushion / Solid Rubber Plain /8 Cushion / Solid Rubber Roller /8 1 /8 Hard / Solid Rubber Plain /8 Hard / Solid Rubber Roller /8 Phenolic Plain /8 3/8 3 1/ Phenolic Roller /8 Polyolefin Plain /8 Polyolefin Roller /8 Cushion / Solid Rubber Plain / Cushion / Solid Rubber Roller / 1 /8 Hard / Solid Rubber Plain / Hard / Solid Rubber Roller / 6 1/ 6 8 Phenolic Plain / Phenolic Roller / Polyolefin Plain / Polyolefin Roller / TPR / Flat Roller GF GF -1/8 PolyLoc / Grey Roller G G -1/8 PolyLoc / Blue Roller P P -1/8 Phenolic Plain / Phenolic Roller / Polyolefin Delrin / Polyolefin Roller / TPR / Flat Roller GF GF -3/ PolyLoc / Grey Roller G G -3/ PolyLoc / Blue Roller P P -3/ TPR / Flat Roller GF GF 3 PolyLoc / Grey Roller G G 3 PolyLoc / Blue Roller P P 3 Polyolefin Delrin Polyolefin Roller / 3/ 9 1/ 6 1/ WHEEL SELECTION: Cushion or Hard Rubber TPR Flat Phenolic Polyolefin PolyLoc Grey PolyLoc Blue Toll Free:
10 Listed by NSF -13-1G STEM GF STEM 1 13/136 Series Stems up to 00 lbs each : Heavy gauge cold rolled steel, formed for strength and heat treated. Dust Cap protects swivel raceway bearings and improves performance. Bright zinc plating to resist rust and corrosion. Swivel Construction: double ball bearing with hardened raceways. sizes 3, and use 3/8 dia axle. sizes 6 and 8 use 1/ diameter axle. King Pin: 1/ steel rivet Fork Leg Spacing: 13 Series Spring Ring: to order, specify stem code number and add to end of caster model number (Example: G STEM 1). Stem Code STEM 1 STEM STEM 3 STEM STEM STEM 6 Stem Sizes 3/ diameter x -3/16 long 13/16 diameter x -3/16 long.8 diameter x -3/16 long.86 diameter x -3/16 long 1 diameter x -3/16 long.860 SQUARE x -3/16 long OPTIONS: VertiLoc brake; Add VL to end of number (See brake photos on page 11) Swivel Grease Seal: Includes zerk grease fitting in dust cap. To order, add GS to end of model number. Optional Plate Sizes: variety of plate sizes available consult factory. 136 Threaded Stem: to order, specify stem code number and add to end of caster model number (Example: G STEM 1). Stem Code STEM 1 STEM STEM 3 STEM STEM STEM 6 STEM 7 STEM 8 Stem Sizes 1/ diameter 13 x 3/ long 1/ diameter 13 x 1 long 1/ diameter 13 x 1-1/ long 1/ diameter 0 x 3/ long 1/ diameter 0 x -1/ long /8 diameter 11 x 1-1/ long /8 diameter 18 x 1-3/ long 3/ diameter 10 x 1 long Spring Ring Stem Threaded Stem Type Load Swivel Height Radius 13 Series 136 Series /16 Polyolefin Roller / 3 7/8 3/8 Cushion / Solid Rubber Plain /8 Cushion / Solid Rubber Roller /8 1 /8 Hard / Solid Rubber Plain /8 Hard / Solid Rubber Roller /8 Phenolic Plain /8 3/16 3 1/ Phenolic Roller /8 Polyolefin Plain /8 Polyolefin Roller /8 Cushion / Solid Rubber Plain / Cushion / Solid Rubber Roller / 1 /8 Hard / Solid Rubber Plain / Hard / Solid Rubber Roller / 6 1/ WHEEL SELECTION: Phenolic Plain / Phenolic Roller / Polyolefin Plain / Polyolefin Roller / TPR / Flat Roller GF GF -1/8 PolyLoc / Grey Roller G G -1/8 PolyLoc / Blue Roller P P -1/8 Phenolic Plain / Phenolic Roller / Polyolefin Delrin / Polyolefin Roller / TPR / Flat Roller GF GF -3/ PolyLoc / Grey Roller G G -3/ PolyLoc / Blue Roller P P -3/ TPR / Flat Roller GF GF 3 PolyLoc / Grey Roller G G 3 PolyLoc / Blue Roller P P 3 Polyolefin Delrin Polyolefin Roller /16 3/ 9 /16 6 1/ Cushion or Hard Rubber TPR Flat Phenolic Polyolefin PolyLoc Grey PolyLoc Blue 10 Toll Free:
11 6 8 S81/S8 WHEEL SELECTION: 6-S81-30G Type 6-S8-31WH S81 Series Stainless Steel Top Plate up to 1,0 lbs each : Polished 30 stainless steel finish Double ball bearing swivel raceways /8 diameter kingpin Stainless 1/ diameter axle with locknut Swivel Caster S81 Series OPTIONS: Black or white polyolefin wheels available- For white polyolefin wheels add WH after 31 (Example: -S81-31WH) Upper and lower raceway sealscall for details VertiLoc HD brake; Add VL to end of number Rigid Caster S8 Series ADVANTAGE HEALTH Delrin 37 -S81-30MF -S8-30MF -1/ Polyolefin Plain 60 -S S / PolyLoc / Grey Delrin 700 -S81-30G -S8-30G -1/ Phenolic Delrin 1,000 -S81-3 -S8-3 -1/ TPR / Round Delrin 0 6-S81-30GD 6-S8-30GD 6-1/ ADVANTAGE HEALTH Delrin S81-30MF 6-S8-30MF 6-1/ Polyolefin Plain S S / PolyLoc / Grey Delrin S81-30G 6-S8-30G 6-1/ Phenolic Delrin 1,00 6-S S / TPR / Round Delrin 0 8-S81-30GD 8-S8-30GD 8 TPR / FLAT Delrin 67 8-S81-30GF 8-S8-30GF 8 Polyolefin Plain S S PolyLoc / Grey Delrin 1,000 8-S81-30G 8-S8-30G 8 Phenolic Delrin 1,0 8-S S8-3 8 Top Plate Dimensions: 3-/ /8 3/8 bolt holes -1/ Load Height Swivel Radius 6 1/ /16 71/ 1/16 91/ 61/ Listed by NSF PolyLoc / Grey Polyolefin Polyolefin Phenolic TPR Round or Flat Brake/Swivel Lock Options VertiLoc -VL PosiLoc -PL Consult factory for brake options on each series. VertiLoc HD -VL PosiLoc HD -PL Bolt-on Swivel Lock To order, specify swivel lock part number For stainless steel swivel lock order part number Toll Free:
12 Listed by NSF -10 Cushion rubber is non-marking and permanently bonded to a hard rubber wheel core. This economical wheel is recommended for light to medium duty loads where noise reduction, floor protection and durability are required. Standard Color / Finish: Black Optional Color / Finish: Grey-consult factory Neoprene: Consult factory Hardness: 7 (± ) Shore A Scale Temperature Range: -30 F to F Cushion / Solid Rubber s up to 60 lbs each 1/ 1 1/ Delrin 10-1/ -10 1/ 1-1/ 3/8 1 1/ Delrin / 1-1/ 9/ / Ball / 1-1/ 9/16 3 1/ 1 1/ Delrin / -10 1/ 1-1/ 3/ 1 1/ Delrin / 1-1/ 7/8 1 /8 Sintered -109 /8 1-1/16 1-1/ 1 /8 Roller -09 /8 1-1/16 1-1/ 1 1/ Delrin / 1-1/ 1-1/ 1 1/ Ball / 1-1/ 1-1/ 1 /8 Sintered /8 1-1/16 1-3/ 1 /8 Roller /8 1-1/16 1-3/ 1 /8 Delrin /8-1/16 1-3/ 1 9/3 Delrin / 1-1/ 1-3/ 6 1 1/ Ball / 1-1/ 1-3/ Hard / Solid Rubber s up to 00 lbs each -106 Hard rubber tread wheels feature one-piece molded construction. These wheels have a higher load capacity than cushion rubber wheels and will not flat-spot while sitting under load (compression set). They are non-marking and offer proven performance under a wide variety of institutional and industrial uses. Standard Color / Finish: Black Hardness: 7 (± ) Shore D Scale Temperature Range: -30 F to F 1/ 1 1/ Delrin 10-1/ / 1-1/ 3/8 1 1/ Delrin / 1-1/ 9/ / Ball / 1-1/ 9/16 1 1/ Delrin / / 1-1/ 3/ 3 1/ 1 1/ Ball / -6 * 1/ 1-1/ 3/ 1 1/ Delrin / 1-1/ 7/8 1 /8 Sintered /8 1-1/16 1-1/ 1 /8 Roller /8 1-1/16 1-1/ 1 1/ Delrin / 1-1/ 1-1/ 1 1/ Ball / 1-1/ 1-1/ 1 /8 Sintered /8 1-1/16 1-3/ 1 /8 Roller /8 1-1/16 1-3/ 1 /8 Delrin /8-1/16 1-3/ 1 9/3 Delrin / 1-1/ 1-3/ 6 1 1/ Ball / 1-1/ 1-3/ 1 Toll Free:
13 Cushion / Solid Rubber s With Decorative Side Plates up to 0 lbs each Listed by NSF These cushion rubber wheels feature metal decorative side plates that make most any cart or mobile equipment more attractive. Standard Color / Finish: Black or Grey Hardness: 7 (± ) Shore A Scale Temperature Range: -30 F to F - -G -00 Black / Flat 3 1/ 1 1/ Ball / - 1/ 1-1/ 3/ 1 1/8 Ball 16-1/ 1-1/ 7/8 1 1/8 Ball 00-1/ 1-1/ 1-1/ Grey / Flat 1 1/8 Ball 16 -G 1/ 1-1/ 7/8 1 1/8 Ball 00 -G 1/ 1-1/ 1-1/ Black / Round 1 1/ Ball / 1-1/ 1-1/ 6 1 1/ Ball / 1-1/ 1-3/ -00G Grey / Round 1 1/ Ball 00-00G 1/ 1-1/ 1-1/ 6 1 1/ Ball G 1/ 1-1/ 1-3/ -113 Welded Disc s up to 300 lbs each -113P Jarvis welded disc wheels offer designers an attractive alternative for foodservice equipment, medical products, point-of-purchase displays and other institutional applications. These wheels feature a black neoprene rubber tread (consult factory on grey models) and blue polyurethane permanently compressed between two steel discs which are welded together. For improved appearance, the center wheel discs are plated with a durable bright nickel plating. Welded disc rubber wheels are quiet rolling and offer excellent floor protection. Standard Color / Finish: Black, grey or blue tread on bright nickel plated wheel core Rubber Hardness: 7 (± ) Shore A Scale Polyurethane Hardness: 9 (± ) Shore A Scale Temperature Range: -0 F to F Rubber (180 F Polyurethane) Black Rubber Models 3 1/ 1 1/ Ball /-113 3/8 1-/ / Ball /8 1-/8 1-1/8 1 1/ Ball /8 1-/8 1-1/ 6 1 1/ Ball / 1-1/ -3/8 Blue Polyurethane Models 3 1/ 1 1/ Ball 0 3-1/-113P 3/8 1-/ / Ball 7-113P 3/8 1-/8 1-1/8 1 1/ Ball P 3/8 1-/8 1-1/ 6 1 1/ Ball P 3/ 1-1/ Stainless Steel Discs To order, add SS to suffix of model number (Example: -113GSS). Toll Free:
14 Listed by NSF -13GF wheels feature a grey, special modulus TPR (Thermoplastic Rubber) tread permanently bonded to a rugged polyolefin wheel core. These attractive wheels offer superior rolling and maneuvering ease with high performance levels that exceed other tread materials. Thanks to their cushion ride, they are ideally suited for a wide variety of foodservice, healthcare and institutional applications. All wheels are non-marking which reduces unsightly marking and scuffing of floors. They are a good choice for use in wet or damp environments. Standard Color / Finish: Dark grey tread on light grey wheel core Hardness: 6 (± ) Shore A Scale Temperature Range: -0 F to F 6-0GF -13GD 6-0GD For added capacity and maneuverability, HD wheels offer greater capacity with non-marking floor protection and a resistance to harsh environments and frequent wash cycles. Each Jarvis wheel features a special grey modulus TPR (Thermoplastic Rubber) tread permanently bonded to a rugged polyolefin wheel core. This combination of materials equals a cushion ride over rough or uneven floors. Standard Color / Finish: Dark grey tread on light grey wheel core Hardness: 6 (± ) Shore A Scale Temperature Range: -0 F to F TPR s up to 3 lbs each Round Models 3 1/ 1 1/ 1 1/ 1 1/ 6 1 1/ Flat Models 3 1/ 1 1/ 1 1/ 1 1/ Round Models Flat Models CONDUCTIVE OPTION Above wheel models optionally available with conductive non-marking grey tread. Consult factory. Ball 3-1/-13GD 3/8 1-/8 1/ Delrin 3-1/-31GD 1/ 1-1/ 1/ Ball 0-13GD 3/8 1-/8 /8 Delrin 0-31GD 1/ 1-1/ /8 Ball 0-13GD 3/8 1-/8 3/ Delrin 0-31GD 1/ 1-1/ 3/ Ball GD 3/8 1-/8 1 Delrin GD 1/ 1-1/ 1 Ball 3-1/-13GF 3/8 1-/8 1/ Delrin 3-1/-31GF 1/ 1-1/ 1/ Ball GF 3/8 1-/8 /8 Delrin GF 1/ 1-1/ /8 Ball 3-13GF 3/8 1-/8 3/ Delrin 3-31GF 1/ 1-1/ 3/ HD TPR s up to 67 lbs each Ball 0 6-0GDB 3/ -3/8 1-3/ Roller 0 6-0GD 3/ -3/8 1-3/ Delrin GD 3/ -3/8 1-3/ Ball GDB 3/ -3/8-1/ Roller GD 3/ -3/8-1/ Delrin GD 3/ -3/8-1/ Roller 30-0GF 3/ -3/8 1-3/8 Delrin 30-30GF 3/ -3/8 1-3/8 Roller 30-1GF 3/ 1-3/8 Delrin 30-31GF 3/ 1-3/8 Roller 37-0GF 3/ -3/8 1-1/ Delrin 37-30GF 3/ -3/8 1-1/ Roller GF 3/ 1-/8 Delrin GF 3/ 1-/8 Roller GF 3/ -3/8 1-3/ Delrin GF 3/ -3/8 1-3/ Roller GF 3/ -1/ Ball GFB 3/ -1/ -1/ 8 Delrin GF 3/ -1/ Roller GF 3/ -3/8-1/ Delrin GF 3/ -3/8-1/ CONDUCTIVE OPTION Above wheel models optionally available with conductive non-marking grey tread. Consult factory. 1 Toll Free:
15 -13RTF unique soft tread wheel handles the heat for autoclave applications s roll quiet and offer a smoother ride compared to traditional high temperature wheels Recommended for use in hospitals, laboratories and cleanrooms -13RTR Corrosion resistant thermoplastics make wheel perfect for washdown and steam clean applications Resilient tread material rejects floor debris compared to many dirt magnet wheels on the market Choice of ball, stainless ball, precision ball and delrin bearings available Hardness: 80 (± ) Shore A Scale Temperature Range: see Elasticity vs Temperature chart at right Heat s up to 3 lbs each Heat Flat 3 1/ 1 1/ Stainless Ball * 3-1/-13RTF 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTF 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTF 3/8 1-1/8 1-/ / Stainless Ball 3* 6-13RTF 3/8 1-1/8 1-/8 Heat Round 3 1/ 1 1/ Stainless Ball * 3-1/-13RTR 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTR 3/8 1-1/8 1-/8 1 1/ Stainless Ball 300* -13RTR 3/8 1-1/8 1-/ / Stainless Ball 3* 6-13RTR 3/8 1-1/8 1-/8 Elasticity Vs. Temperature tread width Heat Coming Soon Per 0 lbs each Model Number 7 lbs each 90 lbs each *Maximum load under heat in which the tread will return to its original state. 1 lbs each Less 10 lbs each (Inches 17 lbs each 300 F 80 F 0 F 0 F 00 F 190 F Listed by NSF -13MF New antimicrobial wheel is designed to suppress the growth of microbes including bacteria, mold and fungi Recommended for use in hospitals, laboratories, food service industry and cleanrooms Additive in wheel is approved for use in the medical and food service industry, with the additive being certified by the FDA, EPA and NSF 6-0MF Choice of ball, stainless ball, precision ball and delrin bearings available Hardness: 6 (± ) Shore A Scale Temperature Range: -0 F to 180 F Health s up to 67 lbs each Model Number Less (Inches Health 3 1/ 1 1/ Stainless Ball 3-1/-13MF 3/8 1-1/8 1-/8 1 1/ Stainless Ball MF 3/8 1-1/8 1-/8 1 1/ Stainless Ball MF 3/8 1-1/8 1-/ / Stainless Ball MF 3/8 1-1/8 1-/8 HD Health Roller 30-0MF 3/ -3/8 1-3/16 Roller 37-0MF 3/ -3/8 1-3/16 6 Roller MF 3/ -3/8 1-3/16 8 Roller MF 3/ -3/8 1-3/16 Round tread models available. Change MF to MD Petri dish show the difference in bacterial growth over a seven day incubation period. The additive lasts the life of the wheel for continuous suppression of microbe growth. Toll Free:
16 Listed by NSF Polyolefin s up to 900 lbs each -13 Polyolefin wheels are a lightweight, economical, hard tread wheel that withstands hard impacts and abusive conditions. These injection molded thermoplastic models are well suited to a wide variety of institutional and industrial applications. Despite their light weight, their impact strength is superior to hard rubber wheels. Polyolefin wheels are impervious to water, oils, grease, solvents, acids and many chemicals. Standard Color / Finish: black Hardness: 6 (± ) Shore D Scale Temperature Range: -0 F to F 1 1/ PLain 00-1/-13 1/ 1-1/ 1/ 1/ 1 3/8 Ball 30-1/- 1/ 1-1/ 1/ Plain 00-1/-31 /8 1-1/16 /8 1 13/16 Roller 00-1/-3 3/ 1-1/16 / / Plain / 1/ Plain /8 1-1/16 /8 1 13/16 Roller / 1-1/16 /8 3 1/ 1 1/ Plain 0 3-1/ / 1-1/ 7/8 1 1/ Plain / 1-1/ 1 Plain / 1-/8 3/ Roller 37-3/ 1-/8 3/ Plain / -3/16 3/ Roller / -3/8 3/ Plain /8 1-1/ 1 1 1/ Ball /8 1-1/ 1 Plain 0-1 3/ 1-/8 1 Roller 0-3/ 1-/8 1 Plain / -3/16 1-1/8 Roller / -3/8 1-1/8 1 3/8 Plain / 3/ 6 Delrin / 1 Roller / 1-7/8 1 Plain / -3/16 1-1/ Roller / -3/8 1-1/ 8 Roller / 1 Plain / -3/16 1-1/ Roller / -3/8 1-1/ Hi-Temp Resin s up to 600 lbs each -1 NHT 3 1/ 1 1/ Plain /-1 HTN 1/ 1-3/ 1/ Plain 37-1 HT 1/ 1-/8 3/ Plain 0-1 NHT 1/ 1-/8 1 Exclusive blended resin compound is designed to withstand the extreme hightemperatures required by certain industries and applications. These easy rolling wheels will not absorb moisture and offer high load ratings and long service life. In addition, they are resistant to most solvents, salts, alkalines, cooking oils, cleaning chemicals, steam cleaning and water immersion. They are ideally suited for high temperature applications such as bakeries, food processing plants and industrial parts heating operations. Standard Color / Finish: Brown (3 1 / model) Black ( and models) Hardness: 7 (± ) Shore D Scale Temperature Range: (Continuous) -0 F to + 7 F (Intermittent) -0 F to + 7 F 16 Toll Free:
17 -13G -13P For those looking for a brighter, more eyeappealing wheel, Jarvis PolyLoc wheels are a natural choice. These models feature a durable dark blue polyurethane crowned tread mechanically locked to a solid polyolefin wheel core. is molded in, around and through a ribbed wheel core to prevent tread separation when exposed to conditions of water and solvents. These models are equipped with single row precision ball bearings for rolling ease. Built in hub caps are color coordinated to match the wheel tread for a very attractive, yet functional and durable wheel. Standard Color / Finish: Dark blue tread on light grey wheel core Hardness: 9 (± ) Shore A Scale Temperature Range: -30 F to F 6-0G 6-0P Attractive polyurethane is mechanically locked to grey polyolefin wheel core for lasting performance in demanding applications. The tread will not separate or de-bond under extreme water or liquid conditions, and it offers excellent abrasion resistance. Sealed roller bearings are designed to keep water and contaminants out and lubrication in for long service life. Standard Color / Finish: Dark blue tread on light grey wheel core Hardness: 9 (± ) Shore A Scale Temperature Range: -30 F to F PolyLoc PolyLoc s up to 30 lbs each Blue Models 3 1/ 1 1/ Ball 0 3-1/-13P 3/8 1-/8 1/ 1 1/ Ball 7-13P 3/8 1-/8 3/ 1 1/ Ball P 3/8 1-/8 1-1/ / Ball P 3/8 1-/8 1-1/ 3 1/ 1 1/ 1 1/ Grey Models 1 1 1/ 6 1 1/ 6 8 HD s Ball 0 3-1/-13G 3/8 1-/8 1/ Delrin 0 3-1/-31G 1/ 1-1/ 1/ Ball 7-13G 3/8 1-/8 3/ Delrin 7-31G 1/ 1-1/ 3/ Delrin G /16 1-1/ 3/ Ball 160-1G /16 1-1/ 3/ Ball G 3/8 1-/8 1-1/8 Delrin G 1/ 1-1/ 1-1/8 Ball G 3/8 1-/8 1-1/ Delrin G 1/ 1-1/ 1-1/ up to 1,000 lbs each Blue Models Roller 600-0P 3/ -3/8 1 Roller 00-1P 3/ 1-1/ Roller 70-0P 3/ -3/8 1-1/ Delrin 70-30P 3/ -3/8 1-1/ 6 Roller P 3/ 1-3/ Roller P 3/ -3/8-3/ Delrin P 3/ -3/8-3/ 8 Roller P 3/ -1/ Roller 1, P 3/ -3/8-3/ Delrin 1, P 3/ -3/8-3/ Grey Models Roller 600-0G 3/ -3/8 1-1/ Delrin G 3/ -3/8 1-1/ Roller 00-1G 3/ 1-1/ Delrin 00-31G 3/ 1-1/ Roller 700-0G 3/ -3/8 1-1/ Delrin G 3/ -3/8 1-1/ Roller G 3/ 1-3/ Delrin G 3/ 1-3/ Roller G 3/ -3/8 1-3/ Delrin G 3/ -3/8 1-3/ Roller G 3/ -1/ Ball BG 3/ -1/ -1/ Delrin G 3/ -1/ Roller 1, G 3/ -3/8-3/ Delrin 1, G 3/ -3/8-3/ Listed by NSF Toll Free:
18 Listed by NSF 6- Phenolic wheels are an industrystandard performer with proven service over many decades. These economical wheels are well suited to a wide variety of industrial and commercial uses. Phenolic wheels are constructed of compression molded phenolic resin filled with macerated canvas. They are a hard tread wheel with high load capacity and are resistant to most oils and other chemicals. Phenolic wheels roll easier and more quietly than steel or cast iron, providing greater floor protection. Standard Color / Finish: black Hardness: 90 (± ) Shore D Scale (Rockwell 10E) Temperature Range: - F to + 0 F Phenolic s up to 1,00 lbs each 3 6 Less Plain / 1-/8 1/ Roller / 1-3/16 1-/8 1/ 1 13/16 Roller /16 1-1/8 1-1/16 3/ 8 Plain / 1-/8 1 Roller / 1-3/16 1-/8 1 Plain / 3/ -3/16 1-1/ Roller 800-3/ 1-3/16-3/8 1-1/ Plain / 1-/8 1-1/ Roller / 1-3/16 1-/8 1-1/ Plain 1, / 3/ -3/16 1-3/ Roller 1,000-3/ 1-3/16-3/8 1-3/ Plain / 1-/8 1-1/ Roller / 1-3/16 1-/8 1-1/ Plain 1, / 3/ -3/16-1/ Roller 1,00 6-3/ 1-3/16-3/8-1/ Plain 1, / 3/ -3/16 Roller 1,00 8-3/ 1-3/16-3/8 Hi-Temp Phenolic s up to 1,00 lbs each 8-HT With a maximum operating temperature range of + F (intermittent service), these durable wheels are designed to perform in conditions that will destroy ordinary caster wheels. Their high load capacity enables them to move heavy loads under extreme heat conditions. All Jarvis high-temp Phenolic wheels are equipped with stainless steel roller bearings with stainless steel raceways for maximum service life and rolling ease. Standard Color / Finish: brown Hardness: 90 (± ) Shore D Scale (Rockwell 10E) 6 8 Less Plain HT 1/ 1-/8 1/ Stainless Steel Roller 800 -HT 3/ 1-3/16-3/8 Plain HT 1/ 1-/8 1/ Stainless Steel Roller 1,000 -HT 3/ 1-3/16-3/8-1/ Stainless Steel Roller Stainless Steel Roller Temperature Range: - F to + 7 F (Continuous operation) - F to + F (Intermittent service) Consult factory. 1,00 6-HT 3/ 1-3/16-3/8 3 1,00 8-HT 3/ 1-3/16-3/8 3-1/ 18 Toll Free:
19 Bumpers Listed by NSF B-3-1/ R (Round Stem) (Grey) (Black) B-3-1/ S (Square Stem) End Bumper B-1 Tubing Bumper B-3-1/ Rolling Bumper B- Grey or black end bumper generally used on the ends of tubular handles on carts and platform trucks. Designed to help protect equipment as well as walls and door facings. Bumper Dimensions: 3-1/ diameter with steel insert for /16 mounting bolt. Designed to fit over 1 OD round or square tubing on carts and a variety of rolling equipment. Please specify round or square tubing when ordering. Specify B-3-1/ R for round ID and B-3-1/ S for square ID. diameter rolling bumper; tapered grey rubber bonded to zinc plated insert with removable center bushings to fit stem diameters from 3/8 to 1-1/8. Specify bumper B (Grey) (Black) (Grey) (Black) 7-01 (Grey) 7-01 (Black) Corner Bumper B-8 Corner Bumper B-10 Corner Bumper B-1 Grey or black corner bumper for mounting on the corners of equipment, carts or any flat surfaces. Absorbs shock to protect equipment and walls, doors and furniture. Bumper Dimensions: 7/8 thick x 1 high x -/8 long from inside corner on each side. Adjustable Equipment Legs A heavy duty bumper with reinforced, rounded corner to protect equipment from shocks and bumps. Steel inserts inside bumper assures permanent mounting to equipment. Ends are tapered and rounded for added design appeal. Bumper Dimensions: 1 thick x 1-1/16 high x 3-1/16 long from inside corner on each side. Mounting holes are 13/6 diameter. A common bumper used to protect a wide variety of mobile equipment and the surrounding environment from bumps and scrapes. This bumper is equipped with steel inserts and can be mounted on any flat surface. The ends of the bumper legs may be cut at notched area to make square ends. Bumper features steel inserts. Bumper Dimensions: 7/8 thick x 1 high x 3-1/8 long from inside corner on each side. Grey bumper with no steel insert, order model number With almost a century of providing to the food service industry, it only makes sense that Jarvis is able to utilize its global resources in advanced manufacturing technologies to develop additional solutions for our customers. Welded mounting plates available in two sizes Integral hex foot Available in multiple finishes Adjustments up to 1 in length Engineered solutions for custom applications Available in, 6 and 8 heights Construction: 16 gauge steel tubing O.D. Tubing: 1-/8 Hex Foot: 1-1/8 Load : 000 lb static load Leg Model Number Overall Extended Height Top Plate Dimensions Bolt Hole Spacing Mounting Bolt Size LEG- -3/8 x 3-/8 1-3/ x 3 /16 LEG-7 3-1/ x 3-1/ -/8 x -/8 9/3 6 LEG6-7 -3/8 x 3-/8 1-3/ x 3 /16 6 LEG / x 3-1/ -/8 x -/8 9/3 19
20 Jarvis Caster Company 881 Lower Brownsville Road Jackson, TN Phone: Fax: All specifications and dimensions are accurate for present manufacture but subject to change without notice. 011 Jarvis Caster Company
CASTERS & WHEELS. Manufacturing Co.
CSTERS & WHEELS Manufacturing Co D R I V E N T O E X C E E D E X P E C T T I O N S Exceeding Expectations ER Wagner Casters & Wheels manufactures the highest quality products for a broad range of applications
More information04 Series Capacity to 350. Polished Stainless Steel Perfect for Washdown and Corrosive Environments
0 Series Capacity to 350 0 For light-duty applications where frequent washdowns are necessary. Ideally suited for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents
More informationOur casters Institutional 1-13
Our casters Institutional 1-13 1370 Series 1 1470 Series 2 2470 Series 3-4 2970 Twin Wheel Casters 5 2440 Series 6 5020 MONO Series 7 5070 GALEA Series 8 5320 ICS Series 9 5320 LEVINA Series - 075 mm 10
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationService Manual SSCI. The Care and Maintenance of Casters. Wheeling, IL (800) 323 7366. Form No. 702755 11/06
Service Manual The Care and Maintenance of Casters SSCI Wheeling, IL (800) 323 7366 Form No. 702755 11/06 Service Manual Table of Contents General Information... 3 Introduction... 3 About this Manual...
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationHAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
More information16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
More informationPUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
More informationRight Angle Grinder USA MADE FLAP DISCS
USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More information1-800-295-5510 uline.com SPECIFICATIONS
H-1394, H-1395, H-1396 H-1397, H-3859, H-3860 π GRAVITY CONVEYOR 1-800-295-5510 uline.com SPECIFICATIONS Conveyor Bed Width In (mm) 18, 24, 30 (457, 610, 762) Load Capacity Per Linear Foot (305mm) Lbs
More informationSTORAGE SYSTEMS PUSH BACK RACK SYSTEMS. Innovative Solutions for Storage and Material Handling Systems
STORAGE SYSTEMS PUSH BACK RACK SYSTEMS Innovative Solutions for Storage and Material Handling Systems Konstant.com PUSH BACK OVERVIEW Konstant patented Push Pack rack system provides selectivity in the
More informationANYTHING ELSE IS A COMPROMISE
ANYTHING ELSE IS A COMPROMISE THE REVOLUTION BEGAN IN 1993. That s when Iron Grip transformed the fitness industry with an unwavering commitment to groundbreaking design and state-of-the-art production
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationPart No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationSCION tc 2005-2008 COIL OVER SUSPENSION Preparation
SCION tc 2005-2008 COIL OVER SUSPENSION Preparation Part Number: PTR11-21070 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: Item # Quantity Reqd. Description
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationRating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
More informationCLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
More informationThe smart route to performance.
M e r i t o r T r a n s i t B u s a n d C o a c h A x l e s The smart route to performance. Meritor Transit Bus and Coach Axles FH-946 The Industry s Axle Leader. With more than a century of axle-manufacturing
More informationFittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS
Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationFor exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.
For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject to change at anytime
More informationVerify caster, camber and toe-in are correct before proceeding.
If rotating the tie rod end 360 degrees changes the toe-in too much, use the rack tie rod to make smaller adjustments. Put the tie rod end in the steering arm and snug the castle nut before adjusting.
More informationBRAKE DRUM AND ROTOR SERVICE INFORMATION
SERVICE INFORMATION To achieve maximum drum life and optimum performance, proper brake maintenance and brake balance are essential. Consult your truck or trailer manufacturer s maintenance manual for proper
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More information4,000 6,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle (Stacker) Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad
More informationCarlon Carflex Liquidtight Flexible Tubing
Carlon Carflex Liquidtight Flexible Tubing Carflex Carflex X-Flex Fittings Cord Grips Pre-Wired Whips www.carlon.com 3 Carflex Liquidtight Flexible Conduit Carflex Liquidtight Flexible Nonmetallic Conduit
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationInstallation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationChoosing the Right Floor Protectors
Choosing the Right Floor Protectors You ve made the investment in new flooring for your home. So what can you do to help ensure your flooring stays looking like new? One of the biggest flooring maintenance
More informationCat. Sizes to fit Cat Skid Steer Loaders, Wheel Loaders, Telehandlers, Backhoe Loaders, and most other manufacturers models.
Cat tires enhance productivity with design innovations and with the valuable option of purchasing your tires complete as mounted assemblies. Cat dealers and Cat tire retailers stock wheel types, sizes,
More information6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
More informationCONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
More informationFixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
More information2006 JUDY SERVICE GUIDE
2006 JUDY SERVICE GUIDE For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject
More informationLIFT-RITE HAND PALLET JACK
LIFT-RITE HAND PALLET JACK Lift-Rite has maintained quality and value in their fully-hydraulic, ergonomically-designed hand pallet trucks. Special material handling applications: We have the ability to
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationValu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
More information2,500 3,700 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationMONDOATHENS BASKETBALL SET (Reference PK110)
MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More information20 GALLON WET DRY VACUUM
20 Gallon Wet & Dry Vacuum 110" Water Lift Vac Motor 24" Front Mount Squeegee Assembly 50' Cord Special Tip Pour Feature Warranty Contractor Tool Kit Includes: Wet p/u Tool, Dry p/u Tool, Crevice Tool,
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationCITY OF BEAUFORT SOLICITING SEALED PROPOSALS FOR MOBILE REFUSE CARTS
CITY OF BEAUFORT SOLICITING SEALED PROPOSALS FOR MOBILE REFUSE CARTS The City of Beaufort is requesting sealed, competitive, proposals for interested Vendors to provide the City of Beaufort fifty-five
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationFor New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
More informationSTORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
More informationSELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
More informationRear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
More informationWARNING! Failure to follow these inspection procedures can cause personal injury and property damage.
GARDNER-DENVER TECHNICAL MANUAL CPTEN-136 07/03 Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model.: Hoist Serial.: WARNING! Failure to follow these inspection procedures can cause
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationBest/Flex Roller Expandable Conveyor
Best Diversified Products Ltd. Best/Flex Roller Expandable Conveyor Product Manual Best Diversified Products Ltd. Brunel Road, Earlstrees Industrial Estate Corby, Northants. NN17 4JW Tel: +44(0) 1536 206969
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing................................FIT-7-2 Metric Industrial Tubing...............................FIT-7-3 Inch D.O.T. Tubing...................................FIT-7-3
More informationFRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
More informationFJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions
FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More information61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationPOLARIS INSUL-TAP CONNECTORS FOR TWO WIRES & IN-LINE SPLICERS/REDUCERS
INSUL-TAP CONNECTORS FOR TWO S & IN-LINE SPLICERS/REDUCERS IT SERIES 1 2 3 4 Insul-Tap connectors are suitable for connecting two wires. For sizes 3/0 AWG and smaller, they are available in two styles
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationFormula World GT 200 DRAFT COPY WWW.TEAMSPEEDMERCHANT.COM. f200.0.0d
DRAFT COPY WWW.TEAMSPEEDMERCHANT.COM f200.0.0d 2 Introduction, Supplies and Additional Equipment Congratulations on your purchase of a Speed Merchant Formula World GT 200 competition chassis. This instruction
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationStainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationSteel Spill Containment Pallets
Steel Spill Containment Pallets O DENIOS steel pallets and sumps are the icons in the industry for compliant containment and long-term service. Heavy gauge steel provides the durability and security demanded
More information2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13)
2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) Exploded View Special Tools Required Ball joint remover, 28 mm 07MAC-SL0A202 Hub dis/assembly tool 07GAF-SD40100 Bearing driver attachment,
More informationOne Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty
One Year Warranty ELECTRIC Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches Fused Ceramic Shield tank lining is corrosion-resistant for years of dependability. Adjustable
More informationPAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More informationWaste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
More informationFabcograte FRP Grating. Tolerances: ±1/16. Tolerances: ±1/16. THICKNESS BAR SPACING PANEL SIZE (FT.) WT (LBS) 1" 1.5" x 1.
Features: Will not rust. Corrosion resistant. Non-sparking. Fire retardant. Non-conductive. Maintenance free. Molded-in color. Light weight. Easy to install. Impact resistant. Quality appearance. Fabcograte
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationHYDRAULIC TABLE CART
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationUsed Fluid Handling Portable Used-Oil Gravity Drains
Portable Used-Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
More informationNew Frontier Utility Disc Harrows
New Frontier Utility Disc Harrows 4-foot to 8-foot working widths R u g g e d. R e l i a b l e. R e a d y. Looking for an economical way to work your land? Then look no further than the Frontier Utility
More informationCeriani Replica GP35R forks. Technical description
Ceriani Replica GP35R forks Technical description This is an advanced racing replica of the GP35 forks. The legs are made from 6061 aluminium, mounted with CNC machined fittings, the stanchions are from
More information6001-602 NOTCHED MARKER DISCS/HUBS BOX
6001-602 NOTCHED MARKER DISCS/HUBS BOX YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com Email: info@yetterco.com 1 6001-602
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationPremium Conventional. General Tire Information. High quality; low operating cost. Pneumatic ride in extreme conditions.
Tire and Overview Premium Conventional 185-9932 254 mm (10 419 mm (16.5 185-9933 304 mm (12 419 mm (16.5 High quality; low operating cost. Skid Steer Loader Tires 5436 XD 222-3962 254 mm (10 419 mm (16.5
More information