Super Blue Pennant Switchboards Warehouse Stock
|
|
|
- Eleanor Allison
- 7 years ago
- Views:
Transcription
1 Warehouse Stock Features The Super Blue Pennant service entrance switchboard is designed to meet the needs of main over current protection with distribution devices for medium duty service applications. Main service disconnects can be either Siemens Vacu-Break fusible switch or Siemens molded case circuit breakers. Either type of device provides dependable performance with series rated combinations available. The switchboard is labeled as suitable for use only as service equipment. Super Blue Pennant switchboards meet EUSERC utility requirements. A NEMA Type 1 indoor or Type 3R outdoor self-contained enclosures are constructed of code gauge steel and painted ANSI-61 light gray. B Rating label information is clearly visible on the equipment front panel. Danger, short circuit rating labels and UL listing label present necessary information to conform with NEMA Standard PB-2. C Metering and test block provisions meet EUSERC utility specifications. D Incoming main lugs are mechanical screw-type mounted on studs accepting a wide range of cable sizes. E Barriered hot sequence utility metering and fully bussed power company current transformer compartment meet EUSERC utility standards. F Service disconnect can be fusible Vacu-Break switch through 200,000 AIC or circuit breaker with maximum rating of 65,000 AIC at 240 volts and 50,000 AIC at 480 volts. G Distribution panel kits are optional and field addable with ratings of amperes. Up to 40 branch circuit provisions available, 18 branch circuit minimum. High interrupting capacity subfeed kits with molded case circuit breaker ratings of 225 or 400 amperes. Series rated combinations are available. Consult sales office. Contact sales office for warehouse stocking locations. 8 SWITCHBOARDS Ampere Ratings Ampere Circuit Breaker Main Ampere Fusible Vacu-Break Main Voltage Ratings 120/240 Volts 1 Phase, 240/120 Volts 3 Phase, Delta 240 Volts 3 Phase, Delta 208Y/120 Volts 3 Phase, 480Y/277 Volts 3 Phase, 480 Volts 3 Phase, Delta I.C. Ratings The short circuit current rating is limited to the lowest current interrupting rating, at the supply voltage, of any device installed. Only Siemens breakers with short circuit interrupting ratings equal to or greater than the marked short circuit current rating shall be used for replacement or additions. 8-5
2 Type 1 Indoor, Type 3R Outdoor Type 1 Indoor Type 3R Outdoor Weatherproof SWITCHBOARDS 8 ( ) ( ) ( ) 26.25" 26.25" 3.875" 5.875" 3.875" 14.5" 12.5" 8.75" 14.5" 14.5" 12.5" 8.75" 14.5" " Dimensions (inches) Description A B C Without Lug Landing With Lug Landing Dimensions (inches) Description A B C Without Lug Landing With Lug Landing
3 Main Circuit Breaker Main Circuit Breaker Main Device Meter Distribution Approximate Ampere Service Catalog Number List Price $ Socket Kits Weight (lbs.) Rating Voltage Indoor Outdoor Indoor Outdoor Clips Available Indoor Outdoor 400 Ampere Breaker Rated 65,000A IR at 240 Volts 35,000A IR at 480 Volts Type JD6 PB224 WPB PQ2612 Delta 240; 3 Phase, PQ4630 PB424 WPB PE4630 PB444 WPB SWITCHBOARDS 600 Ampere Breaker Rated 65,000A IR at 240 Volts 35,000A IR at 480 Volts Type LD6 PB226 WPB PQ2612 Delta 240; 3 Phase, PB426 WPB PB446 WPB PQ4630 PE Ampere (3) Breaker Rated 65,000A IR at 240 Volts 50,000A IR at 480 Volts Type MD6 120/240; 1 Phase, PQ2840 PB228 WPB PQ2816 Delta 240; 3 Phase, PB428 WPB PQ4840 PQ4818 PE4840 PB448 WPB PF Price does not include load side lugs, Distribution Panel or Subfeed Kits. For 6-jaw requirements, order 6th clip kit from accessories. Refer to Distribution Panel Kits for list prices. Discount Schedule A 8-7
4 Main Fusible Switch Main Fusible Switch SWITCHBOARDS 8 Main Device Meter Distribution Approximate Ampere Service Catalog Number List Price $ Socket Kits Weight (Lbs) Rating Voltage Indoor Outdoor Indoor Outdoor Clips Available Indoor Outdoor PF224 WPF PQ Ampere ,000 AIC maximum at 600 Volts 600 Ampere 200,000 AIC maximum at 600 Volts Delta 240; 3 Phase, PQ4630 PF424 WPF PE4630 PF444 WPF PF226 WPF PQ2612 Delta 240; 3 Phase, PQ4630 PF426 WPF PE4630 PF446 WPF Fuses not included. Price does not include load side lugs, Distribution Panel or Subfeed Kits. For 6-jaw requirements, order 6th clip kit from accessories. Refer to Distribution Panel Kits for list prices. Discount Schedule A 8-8
5 Components Main Device (Circuit Breaker or Fusible Switch) Load Side Lugs Ampere Rating Description Catalog Number Wire Range List Price $ 400 For Fusible LKF4 (1) 3/0-750 kcmil (Cu or Al) Switch LKF6 (2) 3/0-500 kcmil (Cu or Al) For Circuit LKB4 (1) kcmil (Cu or Al) Breaker LKB6 (2) 3/0-350 kcmil (Cu or Al) LKB8 (2) kcmil (Cu or Al) Distribution Panel Kits Ampere Number and Type of Breaker Poles Catalog Rating Voltage QP or HQ ED4 QJ2 or QJH2 FXD6 Number List Price $ Weight 120/240V; 1 Phase, 30 PQ PQ /120V; 3 Phase, Delta 30 PQ and 240V; 3 Phase, Y/120V; 3 Phase, Y/277V; 3 Phase, 30 PE V; 3 Phase, /240V; 1 Phase, 40 PQ PQ /120V; 3 Phase, Delta 40 PQ V; 3 Phase, Y/120V; 3 Phase, PQ V; 3 Phase, 40 PE PF SWITCHBOARDS Circuit Breaker Subfeed Kits: (Breakers Not Included) Description Catalog Number List Price $ For FXD6-225A 2 or 3-pole PSFFJ For JXD6, JD6, HJD6 400A 2 or 3-pole PSFJL Price includes phase and neutral load lugs and neutral link assembly. 2-pole FXD6 requires 3-pole space. Price includes branch neutral and disconnect link assembly. 1-pole breakers must not be connected to B phase. 2-pole breakers must be rated 240V. FXD6 circuit breakers are limited to 225A maximum. Price from Molded Case Circuit Breaker section. Discount Schedule A 8-9
6 Accessories SWITCHBOARDS 8 Description Catalog Number List Price $ Underground Pull Section or Full Height Section For Load Wiring 14.5" Deep 90" High 14" Wide (12" opening) indoor PUG " Wide (12" opening) outdoor WPUG " Wide (24" opening) indoor PUG " Wide (24" opening) outdoor WPUG " Wide (load wiring) PLW Lug Landing Kits (Requires Catalog Number PUG26 or WPUG26) 400A 1 Phase, or 3 Phase, PLL A 1 Phase, or 3 Phase, PLL A 1 Phase, or 3 Phase, PLL R Fuse Clip Adaptor Kit (Set of 3) 400A 250/600V SSRK A 250/600V SSRK J Fuse Clip Adaptor Kit (Set of 3) 400A 250V W A 600V W A 240V W A 600V W T Fuse Clip Adaptor Kit (One Pole Kit) 400A 240V TFAK A 600V TFAK A 240V TFAK A 600V TFAK Optional Meter Sockets and Doors Meter Compartment Door (32" Wide x 15" High for S base socket with test block cutout (order necessary meter base from items below) PSP Meter Compartment Door (32" Wide x 30" High) for 2 S base meters with mounting provisions for test block and printing demand meter (order meter base from table below) Left Hand Hinge or Right Hand Hinge PSDP Blank Meter Compartment Door (32" Wide x 15" High) PBP Clip Meter Socket with ring PMS Clip Meter Socket with ring PMS Clip Meter Socket with ring PMS Clip Meter Socket with ring PMS Clip Meter Socket with ring PMS Filler Plates QP-HQP-QJ2-QJ2H-QJH2 QF Handle Blocking and Padlock Devices Blocking (QP-HQP 1, 2 and 3-pole) QL Blocking (QJ2, QJ2-H, QJH2) QJHS Blocking (ED2, ED4, ED6) E2HBL Padlock (QP-HQP) QLD Padlock (QJ2, QJ2-H, QJH2) HL Padlock (ED2, ED4, ED6) ED2HPL Equipment Ground Bus PEGB A PUG26 or WPUG26 Underground pull section is required when using these lug landing kits. Discount Schedule A 8-10
ELECTRIC UTILITY SERVICE EQUIPMENT REQUIREMENTS COMMITTEE, EUSERC
ELECTRICAL SERVICE REQUIREMENTS ELECTRIC UTILITY SERVICE EQUIPMENT REQUIREMENTS COMMITTEE, EUSERC TABLE OF CONTENTS TITLE SECTION NO. List of Approved Electric Utility Service Equipment Requirements Committee
IRRIGATION PUMPING Table of Contents - Section 900
IRRIGATION PUMPING Table of Contents - Section 900 PARAGRAPH 900.1 GENERAL 1 900.2 METERING REQUIREMENTS 1 900.3 CUSTOMER S CONTROL EQUIPMENT 2 900.4 SERVICE CONDUCTOR REQUIREMENTS 2 900.5 RECOMMENDATIONS
Section 10 Electric Switchboards: 0 Through 600 Volts
Section 10 Electric Switchboards: 0 Through 600 Volts 10.1. Scope This section provides specific dimensions and details for service and meter equipment that is assembled by the manufacturer in freestanding,
ELECTRIC METERING COMMERCIAL & INDUSTRIAL
ELECTRIC METERING COMMERCIAL & 1.0 INDEX 1.0 INDEX 2.0 SCOPE 3.0 GENERAL REQUIREMENTS 4.0 METER LOCATIONS 5.0 UNDERGROUND TERMINATIONS 6.0 METERING TRANSFORMER ENCLOSURES 7.0 SINGLE CUSTOMER METER INSTALLATIONS
Secondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
Learning Module 13: Panelboards and Switchboards. 101 Basic Series
Learning Module 13: Panelboards and Switchboards 101 Basic Series What You Will Learn We ll step through each of these topics in detail: Introduction 4 Definitions 4 Similarities Between Panelboards and
Decision-Maker Paralleling System. Power Distribution Switchboards and Circuit Breakers. Standard Features
Decision-Maker Paralleling System Power Distribution Switchboards and Circuit Breakers Power Distribution Switchboards and Circuit Breakers The generator paralleling circuit breakers for the Kohler Decision-Maker
SERVICE ENTRANCE - UNDERGROUND Single & Three Phase 200, & 320/400 Amp
SERVICE ENTRANCE - UNDERGROUND 07-01-15 PAGE 1 OF 6 USE: Arrangement of service equipment to supply electric energy to an underground, outdoor self contained meter installation. LATEST REVISION: PREVIOUS
Submit shop drawings for equipment provided under this section Shop drawings shall indicate:
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Reference The work under this section is subject to requirements of the Contract Documents including the General Conditions, Supplementary Conditions,
Distribution Dry Type Transformers
8 TRASFORMERS Distribution Dry Type Transformers Table (Contact Sales office for List Price) (commonly used) 1a. 115 C Rise F 1b. 80 C Rise B 4. Wall Brackets1 W 6. Low noise XdB below std. LX Type bg
SPEEDFAX TM 2011 Load Centers & Circuit Breakers Contents
SPEEDFAX TM 20 Load Centers & Circuit Breakers Contents Load Centers ing System -2 Siemens PL and ES Series Load Centers Introduction -3 PL Series Load Centers Features and Product Offering -4-5 PL Series
Approved Meter Sockets and Cabinets
Single Unit Residential Guide 1 PHASE, 120/240 VOLT S METERING (Metering sockets and cabinets are supplied by Customer). Outdoor meter mounting height is 1730 mm ( 5 8 ) to center of meter ± 100 mm ( 4
Introduction. Upon completion of Basics of Switchboards you should be able to: Explain the role of switchboards in a distribution system
Table of Contents Introduction... 2 Distribution Systems... 4 Switchboard Definition... 9 Switchboard Construction... 12 Service Entrance Equipment... 18 Service Section... 20 Switchboard Grounding...
All work must conform to the National Electric Code, latest edition, and all other applicable codes and regulations.
DIVISION 16 ELECTRICAL SECTION 16100 - ELECTRICAL PART 1 - GENERAL SCOPE All electrical work as shown on the drawings and as necessary to provide a complete electrical system. Include primary service,
SECTION 26 09 13 - POWER MONITOR FOR ELECTRICAL, STEAM CONDENSATE, AND WATER PART I - GENERAL
SECTION 26 09 13 - POWER MONITOR FOR ELECTRICAL, STEAM CONDENSATE, AND WATER PART I - GENERAL 1.1 SUMMARY A. This section describes the requirements for the installation of Power Monitors and associated
METER REQUIREMENTS GENERAL REQUIREMENTS SECTION D
12 - ELECTRIC SERVICE HANDBOOK SECTION D METER REQUIREMENTS This chapter gives you information on Central Lincoln s metering requirements. It's divided into three sections: General requirements This section
Suitable for Emergency, Peak and Prime Power System Applications. Low Voltage Automatic Transfer Switch Systems
Suitable for Emergency, Peak and Prime Power System Applications Low Voltage Automatic Transfer Switch Systems THE POWER AUTHORITY THE POWER AUTHORITY ASCO s experience and commitment to excellence in
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
MCC Ratings. Voltage Rating
MCC Ratings In addition to the various ratings of individual components used in motor control centers, the overall ratings of the motor control center must also be considered. Voltage Rating Motor control
UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Metering and Monitoring. Basis of Design
Basis of Design This section applies to the design, installation and integration of metering and monitoring equipment, including: hardware installed in the electrical service and distribution equipment,
Sentron Series Circuit Breakers
Sentron Series Circuit Breakers Siemens Sentron Series circuit breakers are available in nine frame sizes: ED, FD, JD, LD, LMD, MD, ND, PD, and RD. Sentron Series circuit breakers have a wide range of
Description. Lugs for NEMA Stud Kits a. (2) #6-350 kcmil SUK350TA (1) #2-600 kcmil SUK600TA. (2) #500-1000 kcmil SUK1000TA.
Uni-PAK : Accessories Selection 2 METER ECHS125 NSK400 SUK350TA Old PAK Accessories Accessories for All-In-One Units Description Catalog Number Description Catalog Number 5th Jaw Kit a Lugs for NEMA Stud
Meter Centers. Meter Combination Catalog Number Logic. Combination Meter Sockets MC 30 40 B 1 200 S E C W
Centers Combination Catalog Number Logic Combination Sockets MC 30 40 B 1 00 S E C W ere (max. circuits) (max. 1" breakers) MM = MC = Load Center Combination 1 = 1-Phase 3 = 3-Phase ML or L = Lug MB or
Selection and application guide. Panelboards. usa.siemens.com/panelboards
Selection and application guide Panelboards usa.siemens.com/panelboards 1 SECTION Contents PAGE Introduction 2 General Specifications 3-5 Catalog Numbering System 6 A detailed Table of Contents is located
Metallic and Non-Metallic Air Conditioning Disconnects. A Complete Family of. Disconnects with Exclusive Time Saving Features
Metallic and Non-Metallic Air Conditioning Disconnects A Complete Family of Disconnects with Exclusive Time Saving Features Enclosed Molded Case Disconnect Switch Not-Fusible The preferred molded case
SPEEDFAX TM 2011 Disconnect Switches Contents
SPEEDFAX TM 2011 Disconnect es Contents Compact Non-Fusible es Rotary and Toggle Selection 5-2 5-4 Dimensions and Wire Ranges 5-5 Type VBII (30-600A) Features and Ordering Information 5-6 and Handle Selection
Mini Power-Zone Unit Substation
Catalog 7440CT0901 2009 Class 7440 CONTENTS Description............................................. Page Product Description...........................................2 General Information...........................................3
Corner-Grounded Delta (Grounded B Phase) Systems
Data Bulletin 2700DB0202R03/12 09/2012 Replaces 2700DB0202R2/09 dated 02/2009 Corner-Grounded Delta (Grounded B Phase) Systems Class 2700 Retain for future use. Introduction Corner-grounded delta systems
Equipment. Metering. Metering Equipment 1. Contents
1 October 00 Utilities Servicing Texas Metering Equipment Contents Page Logic ing System.................................... Product Selection by Utility CenterPoint Energy (Reliant & HL&P).............................
Sample - No Commercial Use
COMPLETE REVISION October 2010 Electrical PIP ELSSG01 Design and Fabrication of Low-Voltage Metal-Enclosed AC Power Circuit Breaker Switchgear PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
Power Outlet Panels. Product Guide
Product Guide Construction and Recreational Vehicle (RV) Power Outlet Panels Vehicle Power (RV) Power Outlet Panels Power Outlet Panels Construction and RV Power Outlet Panels Product Description...1 Application
Circuit Breakers and Switchgear. Thomas Greer Director of Engineering TLG Services
Circuit Breakers and Switchgear Thomas Greer Director of Engineering TLG Services Presentation Outline Switchgear Definition Overcurrent Protection Devices Circuit Breaker Trip Curves and Coordination
ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS
Prepared by: ABB1 ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS 052521 Asset Type: Electric Metering Function: Construction Issued by: Quoc Hoang (QxH1) Date: 07-01-16 Rev. #06: This document
UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Switchboards. Basis of Design. Design Evaluation
Basis of Design This section applies to the design relating to low voltage switchboards. Design Criteria UW Class N1 facilities main switchboards shall be rear accessible. The main, tie and feeder breakers
Section 9: Power Distribution Equipment Bill Brown, P.E., Square D Engineering Services
Section 9: Power Distribution Equipment Bill Brown, P.E., Square D Engineering Services Introduction Power Distribution Equipment is a term generally used to describe any apparatus used for the generation,
DC disconnects for solar photovoltaic installations. Connecting the. power of the sun
DC disconnects for solar photovoltaic installations Connecting the power of the sun Solar energy is heating up Interest in renewable energy sources has never been greater, and the fastest growing of these
Meter Centers. Meter Combination Catalog Number Logic. Combination Meter Sockets MC 30 40 B 1 200 S E C W. [previous page #: 2-18; 2-22]
![Meter Centers. Meter Combination Catalog Number Logic. Combination Meter Sockets MC 30 40 B 1 200 S E C W. [previous page #: 2-18; 2-22]](/thumbs/40/20843871.jpg "Meter Centers. Meter Combination Catalog Number Logic. Combination Meter Sockets MC 30 40 B 1 200 S E C W. [previous page #: 2-18; 2-22]")
[previous page #: 2-18; 2-22] Combination Logic Combination Sockets MC 30 40 B 1 200 S E C W 2 ere (max. circuits) (max. 1" breakers) MM = MC = Load Center Combination 1 = 1-Phase 3 = 3-Phase ML or L =
BERTHOLD ELECTRIC GENERATOR CONNECTION CABINET
BERTHOLD ELECTRIC GENERATOR CONNECTION CABINET Berthold Electric Company s Generator Connection Cabinet provides a quick and convenient station to connect a portable generator to a facility s main service
TP-C2 Motor Operator CLEAVELAND / PRICE INC. Bulletin DB-111B12
Bulletin DB-111B12 TP-C2 Motor Operator CLEAVELAND / PRICE INC. 14000 Rt. 993, Trafford, PA 15085 (724) 864-4177 FAX (724) 864-9040 Email: sales@cleavelandprice.com Cleaveland/Price Type TP-C2 Motor Operator
Temporary Power Outlet Panels. Selection and Application Guide. www.talonmetering.com
Temporary Power Outlet Panels Selection and Application Guide www.talonmetering.com 2012 Siemens Industry, Inc. www.talonmetering.com Talon meter mounting equipment For more than half a century, Talon
Mini Power-Zone Unit Substation Product Description. Product Description. Features. Typical Applications
Product Description Product Description The Mini Power-Zone Unit Substation from Schneider Electric is a miniaturized version of our Power-Zone Unit Substation. Included are: Circuit Breaker Sealed Step-Down
FFI. Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars. Presented By: Greg Pelster & Robert Schmid
Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars Presented By: Greg Pelster & Robert Schmid FFI Ferrie, Franzmann Industries LOW VOLTAGE SWITCHGEAR & LOW VOLTAGE
Primary and Secondary Electrical Distribution Systems
Primary and Secondary Electrical Distribution Systems Critical Facilities Round Table 12th Quarterly Membership Meeting June 2, 2006 David D. Roybal. P.E. Eaton Electrical Cutler-Hammer Products Utility
MEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
Temporary Power Outlet Panels
Power Outlet Panel Types Available ATTENTION PLEASE Siemens is proud to present our new line of temporary power products. This section describes our new product line that that will be available to order
SWITCHGEAR Section 16. SECTION INCLUDES This Section includes service and distribution switchboards rated 600 V and less.
PART 1 - GENERAL SECTION INCLUDES This Section includes service and distribution switchboards rated 600 V and less. RELATED SECTIONS Division 16 Section "Basic Electrical Materials and Methods" for general
Low Voltage Disconnect Switches. NFPA79 and UL508A Industrial Machinery Operating Handle Requirements White Paper
Low Voltage Disconnect Switches NFPA79 and UL508A Industrial Machinery Operating Handle Requirements White Paper Scope This document is intended to discuss the functional requirements for the disconnecting
Engineers Edge, LLC PDH & Professional Training
510 N. Crosslane Rd. Monroe, Georgia 30656 (770) 266-6915 fax (678) 643-1758 Engineers Edge, LLC PDH & Professional Training Copyright, All Rights Reserved Engineers Edge, LLC An Introduction to Interior
Bolted contact switches. Pringle switches
Bolted contact switches Pringle switches Eaton s Pringle bolted contact switches History Eaton s PringleT switches have helped pioneer the development of high-quality electrical products for commercial
Connecting the Power of the Sun. DC Disconnects for Solar Photovoltaic Installations. DC disconnects for. solar photovoltaic installations
Connecting the Power of the Sun DC Disconnects for Solar Photovoltaic Installations DC disconnects for solar photovoltaic installations Solar energy is heating up Interest in renewable energy sources has
B. Related Sections: 1. Section 26 05 33 - Raceway and Boxes for Electrical Systems.
SECTION 262726 - WIRING DEVICES PART 1 - GENERAL 1.1 SUMMARY A. Section includes wall switches; wall dimmers; receptacles; multioutlet assembly; and device plates and decorative box covers. B. Related
ASCO SERIES 185 Power Transfer Switches
ASCO SERIES 185 Power Transfer Switches 4-hour protection no matter when trouble strikes ASCO Series 185 Power Transfer Switches An Automatic Transfer Switch helps prevent... Your business or home from
3. TYPES OF SERVICE AVAILABLE. 3.1 Scope
3. TYPES OF SERVICE AVAILABLE 3.1 Scope UI supplies 60 hertz, alternating current with different voltage and ampere ratings. Not all voltage and ampere ratings are available throughout the entire service
tiastar and legacy Motor Control Center Aftermarket Renewal Parts Catalog
tiastar TM and legacy Motor Control Center Aftermarket Renewal Parts Catalog Table of Contents MCC Identification Guide 1 Ordering Processes 2-3 Section Parts Splice Kits 4 Drip Shield Kits 5 Structural
PREFACE. Your comments or suggestions are welcome and appreciated. They should be sent to:
PREFACE UL developed the Dead-Front Switchboard Marking Guide for code authorities, electric utilities, contractors, installers, users, designers, and other interested parties to aid in understanding deadfront
Applications. Remote Display Mounting Kits
June 200 Sheet 105 Surge Protection Products TVSS General Description Clipper Power System Visor Series.1-5 Clipper Power System Visor Series General Description Eaton s Cutler-Hammer leading-edge surge
Bussmann. All-In-One Module. Bussmann Power Module Switch. How to configure Part Numbers: Step 1: Select Switch Amperage 1
How to configure Part Numbers: Step : Select Switch Amperage Power Module Switch Rating (Amps) Power Module Switch Catalog No. 30 3 60 6 00 200 2 400 4 Step 2: Select Options Needed 5 Bussmann Power Module
Mains. Assembly SCCRs. Voltage ratings. Bus amperages. Branch circuits. Panels. Through-lugs & loadside disconnect. Neutrals. Grounds.
Quik-Spec oordination Panelboard Specifications 11 PELORDS QuikShip ll SQSP configurations of the standard EM 1 enclosure can be specified for shipment within 10 business days of order when specified.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1. 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
Siemens STEP 2000 Course Basics of Electrical Products
Siemens STEP 2000 Course Basics of Electrical Products It's easy to get in STEP! Download any course. Hint: Make sure you download all parts for each course and the test answer form. Complete each chapter
Fusible Disconnect Switch
Circuit Breakers Circuit breakers are used in panelboards and switchboards to provide circuit protection and provide a means of energizing and de-energizing a circuit. Siemens Sentron molded case circuit
HVL 5 38 kv Load Interrupter Switchgear. The Standard for Performance, Protection and Dependability
HVL 5 38 kv Load Interrupter Switchgear The Standard for Performance, Protection and Dependability For a generation of engineers, Square D High Voltage Load (HVL ) Interrupter Switchgear by Schneider Electric
Owner s Manual. For Automatic Transfer Switch. 100-200 Amp, Service Entrance/Non-Service Entrance
Owner s Manual For Automatic Transfer Switch 100-200 Amp, Service Entrance/Non-Service Entrance Model Numbers RTST100A3 RTSP100A3 RTST150A3 RTST200A3 RTSP200A3 MODEL NUMBER: SERIAL NUMBER: DATE PURCHASED:
Please check with your local inspection authority for any additional requirements before installation.
Specifications for Residential Overhead Electric Service Installation This brochure addresses most typical residential overhead service installations. Variances for the following specifications must be
Electrical Service Guidelines
Electrical Service Guidelines Middle Tennessee Electric Membership Corporation Revised: May 23, 2013 MTEMC's Electrical Guidelines TABLE OF CONTENTS Right-of-Way Clearance Guide 3 MTEMC Requirements 4
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches PART 1 GENERAL 1.01 Scope Optional Standby Power Generator Systems A. Furnish and install automatic transfer switches
CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation.
CHAPTER 5 PARTS PARTS BY PICTORIAL This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the
METERING INSTALLATION REQUIREMENTS
METERING INSTALLATION REQUIREMENTS Table of Contents Section 300 PARAGRAPH 300.0 METERING AND SERVICE ENTRANCE EQUIPMENT... 1 300.1 GENERAL... 1 300.2 METERED AND UNMETERED CONDUCTORS... 1 300.3 SEALING
Introduction. Upon completion of Basics of Load Centers you should be able to: Explain the role of a load center in residential power distribution
Table of Contents Introduction...2 Residential Power Distribution...4 Load Centers...6 Load Center Construction...8 Residential Circuit Breakers... 16 Ground Fault Protection...23 Arc Fault Protection...25
Panelboards 11 PANELBOARDS. Type P2 Panelboards. General
General Features Flexibility is the hallmark of the P2 panel. This panel offers a wide array of factoryassembled options to meet almost all lighting panel applications. With this design, the ability to
ELEC ELE TR CTRIC P IC PRODUCTS RODUCT
ELECTRIC PRODUCTS VCEP-1 ELECTRIC PRODUCTS MODEL SB STANDARD SBF SBT SB FEATURES SBST - Bottom intake, slope discharge SBT - Bottom intake, top discharge SBF - Front intake, top discharge Two piece all
Type 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
Section 5 Meters and Service Entrance Equipment
Table of Contents Section 5 Meters and Service Entrance Equipment A. GENERAL... 5-3 B. METER TOTALIZING... 5-4 C. SEQUENCE OF SERVICE ENTRANCE EQUIPMENT... 5-4 D. METER LOCATIONS... 5-11 E. METER ROOMS...
SWITCHGEAR SOLUTIONS FOR MISSION CRITICAL APPLICATIONS. Presented by SAI Advanced Power Solutions
SWITCHGEAR SOLUTIONS FOR MISSION CRITICAL APPLICATIONS POWER DISTRIBUTION RACKS IN A MISSION CRITICAL SYSTEM MODULES IN A MISSION CRITICAL SYSTEM UPS Convertor Main Inverter Load Battery BPC UPS & BATTERY
The following components are common to most cubicles; this example is an ABB HK cubicle.
4.0 CIRCUIT BREAKER CUBICLE Learning Objectives The circuit breaker cubicle is the component of the switchgear that holds the circuit breaker, and the controls and cabling for the distribution system.
The Ultimate Load Center Features 1 2 3 4 5 6 7 8 9 10 11 12 1 INSTA-WIRE neutrals and grounds provide quick and easy neutral conductor installation 2
Residential Load Centers and Circuit Breakers product The Ultimate Load Center Features 1 2 3 4 5 6 7 8 9 10 11 12 1 INSTA-WIRE neutrals and grounds provide quick and easy neutral conductor installation
BUILDERS AND CONTRACTORS GUIDE FOR ELECTRIC SERVICE
BUILDERS AND CONTRACTORS GUIDE FOR ELECTRIC SERVICE Toll Free Telephone Numbers Residential Services 800.454.3853 Commercial Services 800.653.5307 Utility Locating Company N.C. 800.632.4949 S.C. 888.721.7877
PRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
Services. Three Phase Service
Services Primary Service vs Secondary Service Overhead vs Underground Common Service Types Three Phase Wye Closed Open Delta Corner Grounded Center Tapped Open Single Phase Three Phase Service Wye Delta
Distribution Dry Type Transformers
Distribution Dry Type s Sentron Power Centers Bolt-in Breaker Option The same economical space saving package, NEMA 3R rated enclosure, and UL listed transformer of the original Sentron Power Center but
RAY-MAX Integrated Solar Power Strip
RAY-MAX Integrated Solar Power Strip 600008, 600009, 600010, 600208, 600209, 600210 Owner s Manual NEXTRONEX, INC. Revision Date: 10/27/14 Contents 1. Safety Instructions... 3 2. General Equipment Warnings...
Electrical Service Requirements (ESR)
TDBU Electrical Service Requirements (ESR) JULY 2004 ISSUE (Published Quarterly) This manual and the information contained in it is for Southern California Edison ( EDISON ), and Public use. Copyright
SURGE PROTECTIVE DEVICES (SPDs) LOW VOLTAGE AC EXTERNAL SIDEMOUNT SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION SYSTEMS SECTION 16671B SECTION 16671B
SURGE PROTECTIVE DEVICES (SPDs) EXTERNAL SIDEMOUNT UNITS LOW VOLTAGE AC SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION PART 1 GENERAL 01 02 03 SCOPE The Contractor shall furnish and install the Surge Protective
Unit substation solutions with type SIMOSEC primary switches quick reference guide E50001-F710-A389-X-4A00. Answers for energy.
Unit substation solutions with type SIMOSEC primary switches quick reference guide E50001-F710-A389-X-4A00 Answers for energy. Unit substation solution with type SIMOSEC primary switches, dry-type transformer
Cable/Conduit Conversion
Cable/Conduit Conversion Busway can be used in many applications where cable and conduit are more commonly used. The question arises, Why use busway instead of conventional cable and conduit? Benefits
12VDC MAGNETIC LED DIMMABLE POWER SUPPLIES SPEC SHEET DIGEST
12VDC MAGNETIC ED DIMMABE POER SUPPIES SPEC SEET DIGEST TM-30-DIM TM-50-DIM T-60-DIM TM100-DIM TM200-DIM TM300-DIM iring Diagram for TM-50-DIM and TM-100-DIM ED 12VDC MAGNETIC DIMMABE 30 POER SUPPY Smallest
Customer Metering and Services Guide
This document is an uncontrolled copy and may not be the most current copy. The most current copy is available at www.atcoelectric.com. This document is the property of ATCO Electric and may be updated
LVA Take Offs in Bid Manager
Electrical Sales and Distributor Training Low Voltage Assemblies (LVA) LVA Take Offs in Bid Manager This job aid helps to define some of the common selection questions that are encountered when configuring
Medium Voltage Motor Control Assemblies
Medium Voltage Motor Control Assemblies Arc Resistant AMPGARD.1 Product............................................. 2 Application........................................... 2 Features, Benefits and Functions...................................
Customer Substation Manual 08/05/02
Customer Substation Manual Table of Contents Section Page 2 of 85 Description 0 Preface 010.00 General 010.10 Information Required for the Review of New Customer Substations 010.20 New Customer Substation
Introduction. Upon completion of Basics of Electrical Products, you should be able to:
Table of Contents Introduction... 2 Siemens Industry, Inc... 4 Electric Power... 5 Residential Applications... 10 Commercial Applications... 20 Industrial Applications... 37 Manufacturing Applications...
Duke Energy Carolinas. Inverter Based Generation Interconnection
Duke Energy Carolinas Inverter Based Generation Interconnection Options for Non-Residential Service Customers Table of Contents Rider NM and Rider SCG: Net Metering Single Phase PV System Typical 120/240V
Switchboards DE6 SWITCHBOARDS. Selection Guide. MDS Switchboard. QED Switchboard DE6-1. Description
Selection Guide Description Page MDS Switchboard Multi Distribution Switchboard General product description 2 Incoming section options Main circuit breaker selection 4 Customer metering option 5 Group
Specification Guide. for RVAC. Direct Replacement. AC Medium Voltage. Circuit Breakers
Specification Guide for RVAC Direct Replacement AC Medium Voltage Circuit Breakers Table of Contents 1.0 General Work Scope...3 2.0 Standards...3 3.0 Supplier Qualifications...4 4.0 Circuit Breaker Element
www.usa.siemens.com/retail Retail Reference Guide Answers for infrastructure.
www.usa.siemens.com/retail Retail Reference Guide Answers for infrastructure. Arc Fault Circuit Interrupters (AFCI) www.usa.siemens.com/afci Definition of product: Arc fault circuit interrupter (AFCI)
RESIDENTIAL ELECTRICAL REQUIREMENTS (REVISED 3/28/2008) PERMIT REQUIREMENTS:
RESIDENTIAL ELECTRICAL REQUIREMENTS (REVISED 3/28/2008) PERMIT REQUIREMENTS: Signed completed Electrical Permit application form. Minnesota law requires all electrical work is to be performed by licensed,
MTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation
MTE SERIES RLW World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930 2009 MTE Corporation IMPORTANT USER INFORMATION NOTICE MTE Series RLW reactors are components designed to improve the reliability
Electrical Code Regulation
Electrical Code Regulation St. Clair County has adopted the 2005 National Electrical Code in its entirety for the unincorporated areas of the county and all communities that have contracted with the county
GE Power Controls. MiniFORM Switchboards
GE Power Controls MiniFORM Switchboards MiniFORM MiniFORM MiniFORM switchboards Arrangement Modules Arrangement modules 1-6 6 Arrangement modules 7-12 7 Arrangement modules 12-14 8 Arrangement modules