ADVANCED CABLING SOLUTIONS

Transcription

1 ADVANCED CABLING SOLUTIONS Gigabit Speed Giga Highway Low Skew Channel Matrix High Technology Flometrics Fiber Channel UL Certified Wi-Fi Ribbon X Bluetooth RoHS Compliant Test & Measurement IEEE DELIVERING TODAY S INFORMATION AT TOMORROW S SPEED

2 Beyond Technology HCM and the HITACHI name have always been synonymous with quality and superior performance. Simply put, HITACHI has and always will strive for the very best in its products and people. For some, producing cable is a science. At HCM producing cable is as much an art as it s a science. Meeting customer s specific needs goes beyond electrical values and dimensional boundaries. Color, flexibility, durability and the need to meet form, fit and function are all part of the design criteria that HCM strives to evaluate for each custom cable. We encourage our customers to challenge us to think of new and innovative ways to meet their electrical and physical requirements in wire and cable. Within these pages are samples of simple to complex designs. Whether your needs demand the most complex designs or the simplest of cable configurations, rest assured, that we will always aim to exceed your expectations. Innovation Quality Expertise

3 Beyond Technology HCM and the HITACHI name have always been synonymous with quality and superior performance. Simply put, HITACHI has and always will strive for the very best in its products and people. For some, producing cable is a science. At HCM producing cable is as much an art as it s a science. Meeting customer s specific needs goes beyond electrical values and dimensional boundaries. Color, flexibility, durability and the need to meet form, fit and function are all part of the design criteria that HCM strives to evaluate for each custom cable. We encourage our customers to challenge us to think of new and innovative ways to meet their electrical and physical requirements in wire and cable. Within these pages are samples of simple to complex designs. Whether your needs demand the most complex designs or the simplest of cable configurations, rest assured, that we will always aim to exceed your expectations. Innovation Quality Expertise

4 Table of Contents 4 Electronics Cable 5 Manufacturing Capabilities 6, 7 Market Applications 8 HIgh Speed Ribbon Cable 9 Ribbon X 10 Ribbon Twin-Ax Jacketed Laminated Twin-Ax 12 SVGA Series & Plenum Rated VGA & SVGA 39 Mini Coaxial 40, 41 MCX Micro Coaxial & Twin-Ax Summary 42 Micro Coaxial & Twin-AX Technology Central Office Coax AWG Non-shielded SCSI NexZ AWG Shielded SCSI NexZ AWG Shielded SCSI & SCSI NexZ0 47 Flat Ribbon Cable 13 Microzip Summary Sheet PVC Solid & SR-PVC Stranded Microzip Ribbon TPO Stranded & Solid Microzip Ribbon 16 Non-Hal Solid Microzip & 1mm PVC Stranded Ribbon 18 MQT Summary PVC Stranded Micro Quick-Twist TPO Stranded & Solid Micro Quick-Twist PVC Stranded & Hi-Flex 19 Stranded Rainbow Ribbon Intermittently Bonded Rainbow Ribbon TPO Stranded Flat Ribbon 25 Round to Flat Ribbon 26 Shielded Flat Ribbon PVC Stranded Wide Pitch Ribbon PVC Stranded Wide Pitch Ribbon 29 Ribbonized Automation 30 Mini Probe 31 Robotic & Automation 48,49 UL2464 Control & Communications 50 IEEE 1284 Bi-Directional Printer Cable 51 Industrial Control Cable 52 Hookup Wire 53 SCSI-LITE 54 UL Style Listings Under Subject Product & Burn Test Requirements 56 NEC Hierarchy 57 Alloy Comparisons 58, 59 HCM Series Number Index 60,61 HCM Worldwide 62, 63 Every effort has been made to ensure the accuracy of the data in this catalog. HCM cannot, however, assume responsibility for any typographical error which may have occurred. Market Applications 32 High Speed Round Cable 33 Channel Matrix Infiniband 34 Channel Matrix GIGA-Highway Round Multi Lane 35 SAS Low Skew 36 HDMI High Definition Multimedia Interface 37 REGISTERED TO ISO 9001 CERTIFICATE NO. A1883 Orange = High Speed Cable Purple = Flat Ribbon Cable Blue = Industrial & Medical Cable Green = Round Cable

5 Electronics Cable 5 Quality Hitachi Cable Manchester cable products are designed and manufactured under strict ISO registration guidelines and our own stringent quality control standards to deliver the highest quality cabling solutions available. Put us to work for you today - you ll quickly find out that we re not satisfied until you are. Innovation To ensure constant improvement, HCM continually innovates through internal operating procedures that set new industry standards for cable products of superior quality. Our commitment to continuous improvement and dedication to products of uncompromising quality is unrivaled in the marketplace. Expertise Hitachi Cable Manchester is renowned for its highly skilled engineering and management staff. We have a unique expertise in building cable for high-end electronics applications and have earned a reputation for developing cabling solutions which exceed industry standards. Whether you re looking for stock or custom cable, we have the experience, tools and high quality products to make your application the success it was designed to be.

6 Manufacturing Capabilities Manufacturing Capabilities 6 7 Primary extrusion starts the process of making electronic cables. Flometrics (the art of liquid film) is shown here. Braid used as an effective method of shielding for individual components and overall cable. All individual core pairs or discrete primaries being cabled together. Individual primaries become pairs during the twisting operation. Rigorous testing to both industry and customer standards completes the manufacturing process. Final jacketing provides the finishing touch to quality electronics cables. Manufacturing Capabilities Manufacturing Capabilities

7 Manufacturing Capabilities 7 Braid used as an effective method of shielding for individual components and overall cable. Rigorous testing to both industry and customer standards completes the manufacturing process. Final jacketing provides the finishing touch to quality electronics cables. Manufacturing Capabilities

8 8 Market Applications Industry & Technology E ach day our world evolves as technology and demands push us to new horizons. Cable in flat configurations has long been viewed as low end and cheap. At HCM, just the opposite is true. HCM now produces a variety of flat ribbon products to service the high speed test and measurement markets as well as medical and robotic type applications. Medical Automotive

9 High Speed Ribbon Cable HCM High Speed Ribbon Cable Delivering today s information at tomorrow's speed may sound like a cliché, but to HCM it s a must for survival in today s technology-driven world. Not long ago it was suggested that copper was stretched to it s maximum performance and it would be impossible to go any faster or over longer lengths. 9 Today, copper is still the preferred choice in standard and advanced interconnect applications. Lower time delays, lower in pair skew and lower pair-to-pair skew numbers are exceeding market expectations. Copper gauges continue to get smaller with demands for smaller and more flexible cable solutions. HCM offers a variety of low skew, high speed cables for specific cabling needs. The following pages offer a glimpse of some of our flat ribbon products used in high speed applications. For more information please contact us for the very latest in high speed cable solutions.

10 Ribbon X 10 UL Style: UL Voltage Rating: 150V UL Temp: 105 C CSA Style: AWM I A/B FT- 1 CSA Voltage Rating: 150V CSA Temp: 105 C This ribbonized coax features Hitachi s top quality MCX. Coax is fully extruded to eliminate the need for laminating. UL and CSA approved (cable is printed UL/CSA). Common grounds are simplified with parallel ribbon design. Excellent mechanical strength and flex life characteristics. APPLICATIONS Parallel processing, high speed interconnect CPU management and board to board interface. <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION Basic construction of the uses a 38 AWG, 50 OHM Coax Conductor. An FEP insulation is then applied, followed by a 48 AWG Spiral Shield. The final jacket consists of two layers of PET tape. One with a copper metalized tape, and a second with a colored PET tape. All MCX coaxial cables are extruded together with a clear PVC jacket to form the final ribbonized cable. Construction of the uses a 40 AWG, 50 OHM coaxial cable. Series No. Inner Conductor Dielectric Shield Ribbonized MCX Sheath AWG (Stranding) Dia. Coating Material Inch (mm) AWG Braid Material MCX Dia. Inch (mm) Color Cap. Cond. pf/ft. TDR (Ω) Resist. (pf/m) 20 C (Ω)/km) (7/46) SC FEP alloy (0.34) + Cu met. tape PET Blue (0.44) Black (95) (3000) (7/48) SC PFA alloy (0.25) + Cu met. tape PET Blue (0.34) Black (100) (5000) Part No. No. of Coax Insulation Width Span Pitch Pitch Tolerance P FEP/PET/PVC ± ± ± P FEP/PET/PVC ± ± ± P PFA/PET/PVC ± ± ± P PFA/PET/PVC ± ± ±o.002 Note: Color code is blue & black, repeated, for 38 AWG with a red MCX for polarity. Color code is blue & green, repeated, for 40 AWG with a yellow MCX for polarity. Other conductor counts available upon request. All data is for reference only and is subject to change. Ribbon X

11 Ribbon Twin-Ax Jacketed UL Style: 2854 UL Voltage Rating: 30V UL Temp: 80 C 11 Rugged performance. Low dynamic impedance variation. UL approved Precision pair to pair pitch APPLICATIONS Test and measurement equipment, low skew pair to pair and low in pair skew. <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION This 2.0 mm ribbon twin-ax uses individually extruded FEP primaries. Two conductors are pulled parallel and taped with PTFE to increase common mode impedance. Each pair is braided with silver plated copper wire and then extruded into a ribbon cable. Series No. Conductor AWG Stranding Coating Insulation Conductor Resistance (Ω/km) Capacitance Impedance Propagation Delay Diff. Within Pr. Shield Nom. pf/ft. Common (G-S) Nom. ns/ft. Skew (pf/m) Mode (Ohms) (ns/m) ps/ft. (ps/m) AWG Solid 98 Braid ± 2 96 ± /38 FEP (324) 7E/44 AWG (42.5) (4.72) (10) SC 31 AWG Solid 125 Braid ± ± /39 FEP (408) 7E/44 AWG (42.5) (4.72) (10) SC 30 AWG Solid 102 Braid ± ± /30 FEP (334) 6E/44 AWG (42.5) (4.72) (10) SC No. of Width Span Pitch Standard Part No. Insulation Conductors/Pairs W S Tolerance Put-ups P FEP/PVC 16/ ± ± ± P FEP/PVC 16/ ± ± ± P FEP/PVC 16/ ± ± ± Other conductor counts available upon request. All data is for reference only and is subject to change. Ribbon Twin-Ax Jacketed

12 0.100 Laminated Twin-Ax 12 UL Style: (Pending) UL Voltage Rating: 30V UL Temp: 80 C CSA Style: VW-1 CSA Voltage Rating: 150V CSA Temp: 105 C Flexibility in laminated spans. Low overall in pair and pair to pair skew Simple design for high end performance Loose pair construction for ease of routing. APPLICATIONS High speed computer systems. Test and measuring systems. <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION Construction consists of HDPE conductors over solid 26 AWG silver copper. Two conductors are laid parallel and wrapped with a heat sealed AL/PET Tape (AL side out). All pairs are then intermittently bonded together at various spans. Series No. Capacitance Impedance Propagation Delay Conductor Conductor Resistance Common Diff. Pair to Pair Within Pair AWG Insulation Ω/Mft pf/ft Mode Ohms Skew Skew Shield (pf/m) (Ohms) ps/ft ps/ft Coating (Ω/km) Nominal (ps/m) (ps/m) AWG 40 AL/PET ± (1/26) HDPE (132) Tape (39) (30) (10) SPC AWG 40 AL/PET ± (1/26) HDPE (132) Tape (39) (30) (10) SPC Laminated No. of Width Span Pitch Standard Part No. Span Conductors/Pairs W S Tolerance Put-ups P / ± 0.015" 2.40 ± 0.015" ± ' P / ± 0.015" 2.40 ± 0.015" ± ' Other spans available. Other conductor pairs available upon request. All laminated construction available. All data is for reference only and is subject to change Laminated Twin-Ax

13 Flat Ribbon Cable HCM Flat Ribbon Cable The process for making great flat cable is simple. Start with the best materials used with the best tools. We run to the tightest tolerances in the industry with regards to span and width of our cables. In flat cables, the key to low cost termination is ease of the termination during the IDC process with consideration to minimize scrap. 13 With HCM cable you can feel confident designing in our cable to meet your needs for both electrical as well as physical performance. When faced with design issues for electrical performance, Hitachi has a variety of compounds to meet your specific electrical needs. We have a history of producing cable from low end point to point applications to high speed transmission cables. Over a decade ago, HCM was the first to introduce MCX Ribbon X to the market. Since that time we have been challenged to constantly refine our product to make it better, faster and more affordable. The following pages offer an overview of our flat ribbon products. The second half of this catalog focuses on round electronic cables. Please check out our web site for additional cable offerings. www. hcm.hitachi.com

14

15 0.025 PVC Solid & SR-PVC Stranded Microzip Ribbon UL Style: 2678 UL Voltage Rating: 150V UL Temp: 105 C CSA Style: AWM I A/B FT- 1 CSA Voltage Rating: 150V CSA Temp: 105 C 15 Tight tolerances on 0.025" pitch flat ribbon cable. Solid conductor construction for lower cost alternative with improved impedance performance over stranded. UL and CSA approved (cable is printed UL/CSA) 80 Conductor Ultra ATA 100 Compliant. APPLICATIONS Ultra ATA 33, 66, 100 and 133. High density interconnect. <90ppm <5ppm <5ppm <5ppm <1000ppm.0333 ± ±.002 RED POLARITY STRIPE ON #1 COND EDGE. PHYSICAL CONSTRUCTION DESCRIPTION This Microzip consists of 30 AWG solid bare or stranded tinned copper. Conductors are then fully extruded with PVC insulation. A red polarity stripe is added to the first conductor for easy identification. Standard color is gray. Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 30 AWG 1/30 PVC BC 30 AWG 7/38 PVC No. of Width Span Pitch Standard Part No. Insulation Conductors W S Tolerance Put-ups P PVC " 0.475" ± 0.005" ± " 100' P PVC " 0.600" ± 0.005" ± " 100' P PVC " 0.625" ± 0.005" ± " 100' P PVC " 0.825" ± 0.005" ± " 100' P PVC " 0.975" ± 0.005" ± " 100' P PVC " 1.225" ± 0.005" ± " 100' P PVC " 1.475" ± 0.005" ± " 100' P PVC " 1.675" ± 0.005" ± " 400' P PVC " 1.975" ± 0.005" ± " 400' P PVC " 2.475" ± 0.007" ± " 100' P PVC " 0.225" ± 0.005" ± " 100' P PVC " 0.375" ± 0.005" ± " 100' P PVC " 0.475" ± 0.005" ± " 100' P PVC " 0.625" ± 0.005" ± " 100' P PVC " 0.725" ± 0.005" ± " 100' P PVC " 0.825" ± 0.005" ± " 100' P PVC " 0.975" ± 0.005" ± " 100' P PVC " 1.225" ± 0.005" ± " 100' & 500' P PVC " 1.475" ± 0.005" ± " 100' P PVC " 1.975" ± 0.005" ± " 400' P PVC ,475 ± ± Other conductor counts available upon request AWG 7/36 also available. All data is for reference only and is subject to change. Note: thickness is ± PVC Solid & SR.PVC Stranded Microzip Flat Ribbon

16 0.025 TPO Stranded & Solid Microzip Ribbon 16 UL Style: UL Voltage Rating: 30V UL Temp: 105 C CSA Style: AWM I A/B FT- 1 CSA Voltage Rating: 150V CSA Temp: 105 C RED POLARITY STRIPE ON #1 COND EDGE..025 ± ±.002 Tight tolerances on 0.025" pitch flat ribbon cable. Compliant for today s new high speed termination machinery, offering tight tolerances on pitch and span. UL and CSA approved (cable is printed UL/CSA) 80 Conductor Ultra ATA 100 Compliant. APPLICATIONS Ultra ATA 33, 66, 100 and 133. SPI, SPI-2, SPI-3 and some SPI-4. SCSI Fast XX. <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION SCSI Fast-XX/SPI-2 & SPI-3 compliant, this Microzip cable consists of 30 AWG solid silver-plated copper. 31 or 32 AWG are available. The silver plated copper is fully extruded with HCM s unique Thermoplastic Olefin. A red polarity stripe is co-extruded into position number one for easy identification. Since the polarity stripe is physically extruded into the edge of position one, no chipping or flaking will occur.no hazardous inks are used for the stripe. Standard color is light yellow with a red polarity stripe (violet for 32 AWG). Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 30 AWG 7/38 TPO AWG Solid TPO SC No. of Width Span Pitch Standard Part No. Insulation Conductors W S Tolerance Put-ups P TPO " 0.625" ± 0.005" ± " 100' P TPO " 0.825" ± 0.005" ± " 100' P TPO " 0.975" ± 0.005" ± " 100' P TPO " 1.225" ± 0.005" ± " 100' P TPO " 1.575" ± 0.005" ± " 100' P TPO " 1.675" ± 0.005" ± " 400' P TPO " 1.975" ± 0.005" ± " 400' P TPO " 0.825" ± 0.005" ± " 200' P TPO " 1.225" ± 0.005" ± " 100' P TPO " 1.675" ± 0.005" ± " 400' P TPO " 1.975" ± 0.005" ± " 400' Other conductor counts available upon request. All data is for reference only and is subject to change TPO Stranded & Solid Microzip Ribbon

17 Non-Hal Solid Microzip UL Style: (Pending) UL Voltage Rating: 30V UL Temp: 105 C CSA Style: AWM I A/B FT- 1 CSA Voltage Rating: 30V CSA Temp: 105 C 17 Same tight tolerance you can expect from HCM ± Non Halogen. ECO-Green friendly. APPLICATIONS Ultra ATA 33, 66, 100 and 133. Internal wiring in non-halogen appliances. <90ppm <5ppm <5ppm <5ppm <1000ppm.025 ±.0016 Black POLARITY STRIPE ON #1 COND EDGE..027 ±.002 PHYSICAL CONSTRUCTION DESCRIPTION This Microzip consists of 30 AWG solid bare copper. Each leg of copper is pulled in parallel and fully extruded. A polarity stripe is co-extruded into position number one for easy identification. Color is green with black polarity. Series No. Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) AWG Low Smoke 1/30 BC Non-HAL No. of Width Span Pitch Standard Part No. Insulation Conductors W S Tolerance Put-ups P Non-HAL ± ± " 400' P Non-HAL " 0.975" ± 0.005" ± " 400' Other conductor counts available upon request. All data is for reference only and is subject to change. Non-Hal Solid Microzip

18 & 1mm PVC Stranded Ribbon 18 UL Style: 2678 / 2651 UL Voltage Rating: 150V / 300V UL Temp: 105 C CSA Style: AWM I A/B FT- 1 CSA Voltage Rating: 150V / 300V CSA Temp: 105 C.0333 ± ±.002 RED POLARITY STRIPE ON #1 COND EDGE thickness is.028 ±.002. Easy IDC termination and 1mm pitch for specialized hard drive designs. Great electrical values using low cost PVC. Manufactured with 30 or 28 AWG stranded tinned copper for increased electrical performance. APPLICATIONS Disk drives. <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION HCM s Microzip " cable is built with 30 AWG stranded tinned copper. Conductors are fully extruded with PVC. No lamination tapes that impede termination with high density connectors are used. Standard color is gray. Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 30 AWG 7/38 PVC AWG 7/38 PVC AWG 7/36 PVC No. of Width Span Pitch Standard Part No. Insulation Conductors W S Tolerance Put-ups P PVC " " ± 0.011" ± 0.002" P PVC " " ± 0.007" ± 0.002" 100' P PVC " 1.931" ± 0.007" ± 0.002" 100' P PVC ".355" ± 0.005" ± 0.002" 100' P PVC ".749" ± 0.007" ± 0.002" 100' P PVC " 1.300" ± 0.007" ± 0.002" 100' P PVC " 1.537" ± 0.007" ± 0.002" 100' P PVC " 1.929" ± 0.007" ± 0.002" 100' Other conductor counts available upon request. All data is for reference only and is subject to change & 1mm PVC Stranded Ribbon

19 MQT Summary Sheet PVC UL/cUL Listing: PVC UL/cUL Voltage: 150V PVC UL/cUL Temp: 105 C PVC UL/cUL Flame Rating: VW-1 TPO UL/cUL Listing: TPO UL/cUL Voltage: 30V TPO UL/cUL Temp: 90 C TPO UL/cUL Flame Rating: VW-1 19 Heat bonding construction providing tighter pitch control. Contoured flat sections for ease of IDC termination. Non-laminated versions offer increased air flow. Stranded construction for greater flexibility and flex life. Solid copper constructions also available. Many constructions are suitable for SE, MSE, LVD and MLVD applications. Ask about our Ultra 320. products designed for <90ppm <5ppm <5ppm <5ppm <1000ppm HCM Short Description MQT SMQT DLMQT DLSMQT TPO MQT TPO DLMQT Capacitance Impedance Propagation Delay HCM Bond Conductor Span of Flat Skew Series No. Length AWG Ins. to Flat Inch pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. ns/ft. Page Stranding (mm) (G-S) (G-S-G) (Ohms) (Ohms) (Max.) Coating Diff. SE SE Diff (40) 30 7/38 PVC 9.84 (250) (40) 4.92 (125) (50) 10.24(260) Web (40) 7/40 PVC 9.84(250) Web (50) 5.24(133) Web (40) (250) (40) 7/38 SR-PVC 4.92 (125) (50) 10.24(260) Web (40) 7/40 PVC 9.84(250) Web (80) 5.24(133) Web (40) (250) /38 TPO (40) 4.92 (125) (40) 5.24(133) (80) 1/ (125) (40) 9.84(250) web (50) (260) (40) 30 7/38 TPO 9.84 (250) (50) 5.24 (133) (40) 4.92 (125) (40) 5.24(133) Web (40) 9.84(250) Web (40) 10.24(260) Web MQT is Micro Quick-Twist cable that is a twisted pair cable with bonded sections on pitch. DLMQT is either PVC or TPO and has two layers of laminating tape. * Variable Spans available up to 7 spans. ** Other fixed spans available. All data is for reference only and is subject to change. MQT Summary Sheet

20 0.025 PVC Stranded Micro Quick-Twist 20 UL/cUL Listing: UL/cUL Voltage: 150V UL/cUL Temp: 105 C UL/cUL Flame Rating: VW-1 Excellent noise and crosstalk reduction characteristics. Ideal for IDC termination with High-Density connectors. Great alternative to FEP and TPO cables when higher performance is demanded of a stranded cable. APPLICATIONS SCSI, Fast-XX, SPI-2 and SPI-3. <90ppm <5ppm <5ppm <5ppm <1000ppm TYPICAL THICKNESS FOR AND THICKNESS FOR AND IS.024 ±.002. PHYSICAL CONSTRUCTION DESCRIPTION HCM s Micro Quick-Twist is built with 30 AWG stranded tinned copper. Each conductor is individually extruded with PVC. Conductors are pulled into pairs then bonded into flat sections for IDC termination points. No lamination tapes are used on the flat sections for and Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 30 AWG /38 PVC AWG SR-PVC /38 Dual Laminated No. of Width Span Pitch Span Bond Part No. Insulation Pairs W S Tolerance Length Inch Length (mm) Inch (mm) P PVC " 0.625" ± 0.002" 9.84 (250) 1.57 (40) P PVC " 0.825" ± 0.002" 9.84 (250) 1.57 (40) P PVC " 1.225" ± 0.002" 9.84 (250) 1.57 (40) P PVC " 1.675" ± 0.002" 9.84 (250) 1.57 (40) P PVC " 1.975" ± 0.002" 9.84 (250) 1.57 (40) P PVC " 2.475" ± 0.002" 9.84 (250) 1.57 (40) P PVC " 1.675" ± 0.002" 4.92 (125) 1.57 (40) P SR-PVC ± (250) 1.57 (40) P SR-PVC ± (125) 1.57 (40) P SR-PVC ± (125) 1.57 (40) Standard multicolor is Red, White, Blue, White, Blue, White, Blue, White, Blue, White, repeat All data is for reference only and is subject to change PVC Stranded Micro Quick-Twist

21 0.025 TPO Stranded & Solid Micro Quick-Twist UL/cUL Listing: UL/cUL Voltage: 30V UL/cUL Temp: 90 C UL/cUL Flame Rating: VW-1 21 Excellent noise and crosstalk reduction characteristics. Ideal for IDC termination with High Density connectors. UL approved Compliant for SCSI Fast-XX, SPI-2, SPI-3 U160 LVD, SPI-4. U320 LVD and SE applications. APPLICATIONS Internal SCSI drives, SPI, SPI-2, SPI-3, SPI-4. Great for U1 and U2 servers. <90ppm <5ppm <5ppm <5ppm <1000ppm.025 ± ±.002 TYPICAL THICKNESS FOR 20187, and , AND HAVE.024 ±.002 THICKNESS. PHYSICAL CONSTRUCTION DESCRIPTION HCM s TPO Micro Quick-Twist is built with 30 AWG stranded or solid tinned copper. Each conductor is individually extruded with TPO. Conductors are pulled into pairs then bonded into flat sections for IDC termination points. No lamination tapes are used on the flat sections for and Series No & & Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 30 AWG /38 TPO AWG 1/ AWG 7/ AWG 7/30 30 AWG 7/38 TPO 106 Capacitance Impedance Propagation Delay No. of Width Span Pitch Span Bond Part No. Insulation Pairs W S Tolerance Length Inch Length (mm) Inch (mm) P TPO ± (250) 1.57 (40) P TPO ± (125) 1.57 (40) P TPO ± (125) 1.57 (40) P TPO ± (133) 1.57 (40) P TPO ± (260) 1.98 (50) P TPO ± (250) 1.57 (40) P TPO ± (133) 1.98 (50) P TPO ± (125) 1.57 (40) Standard multicolor is Red, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, repeat for all stranded constructions. All data is for reference only and is subject to change TPO Stranded & Solid Micro Quick-Twist

22 0.050 PVC, Stranded & Hi-Flex 19 Stranded 22 UL Style: 2651 UL Voltage Rating: 300V UL Temp: 105 C CSA listing: AWM I A/B FT-1 CSA Voltage Rating: 300V CSA Temp: 105 C.050 ± ±.002 Symmetrical profile offers easy conductor separation (zip) without cable damage and allows reverse plane termination pitch for use with today s low cost IDC connectors. APPLICATIONS For use with manual or high speed automated termination equipment <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION Flat planar cable using 28 AWG (7/36) tinned copper, extruded in PVC on 0.050" (1.27mm) centers. Hi-Flex 0.050" cable is built with 28 AWG stranded (19/40) tinned copper. Conductor number one is marked with a red polarity stripe. Cable is printed with UL/CSA approvals. Standard color is gray. Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 28 AWG 7/36 PVC AWG 19/40 PVC No. of Width Span Pitch Standard Part No. Insulation Conductors W S Tolerance Put-ups P PVC " 0.250" ± 0.006" ± 0.002" P PVC " 0.400" ± 0.006" ± 0.002" 100' P PVC " 0.450" ± 0.006" ± 0.002" 100', 500' P PVC " 0.550" ± 0.006" ± 0.002" 100' P PVC " 0.650" ± 0.006" ± 0.002" 100', 500' P PVC " 0.700" ± 0.008" ± 0.002" 100', 500' P PVC " 0.750" ± 0.008" ± 0.002" 100', 500' P PVC " 0.950" ± 0.008" ± 0.002" 100', 500' P PVC " 1.150" ± 0.008" ± 0.002" 100' P PVC " 1.200" ± 0.008" ± 0.002" 100', P PVC " 1.250" ± 0.008" ± 0.002" 100', 500' P PVC " 1.450" ± 0.008" ± 0.002" 100' P PVC " 1.650" ± 0.010" ± 0.002" 100' P PVC " 1.750" ± 0.010" ± 0.002" 100' P PVC " 1.800" ± 0.010" ± 0.002" 100' P PVC " 1.950" ± 0.010" ± 0.002" 100', 500' P PVC " 2.450" ± 0.011" ± 0.002" 100, 500' P PVC " 2.950" ± 0.011" ± 0.002" 100', P PVC " 3.150" ± 0.011" ± 0.002" 100' P PVC " 0.450" ± 0.008" ± 0.002" 100' P PVC " 0.950" ± 0.008" ± 0.002" 100' P PVC " 1.250" ± 0.008" ± 0.002" 100' P PVC " 1.650" ± 0.010" ± 0.002" 100' P PVC " 1.950" ± 0.010" ± 0.002" 100' P PVC " 2.450" ± 0.011" ± 0.002" 100' Other conductor counts available upon request. Available in tinned overcoat CU(20069), 30 AWG Solid (20052), solid (23197), and 26 AWG stranded (23043). All data is for reference only and is subject to change PVC, Stranded & Hi-Flex 19 Stranded

23 0.050 Rainbow Ribbon UL Style: UL Voltage Rating: 300V UL Temp: 105 C CSA listing: AWM I A/B FT-1 CSA Voltage Rating: 300V CSA Temp: 105 C 23 Individually color coded conductors for easy identification. Fully extruded construction. No lamination tapes to impede termination. Zip construction. Symmetrically round conductors improve IDC termination. APPLICATIONS Internal wiring of electronic equipment. <90ppm <5ppm <5ppm <5ppm <1000ppm.050 ± PHYSICAL CONSTRUCTION DESCRIPTION Ribbon cable is constructed with 28 AWG (7/36) tinned copper. Each conductor is first extruded with SR-PVC and then all conductors are pulled in parallel and extruded in clear PVC. No lamination tapes that can impede IDC termination are used. Color code for this cable is Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White, Black and repeat. Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding ΩΩ/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 28 AWG 7/36 SR-PVC PVC No. of Width Span Pitch Standard Part No. Conductors Conductors W S Tolerance Put-ups P SR-PVC/PVC " 0.400" ± 0.006" ± 0.003" 100' P SR-PVC/PVC " 0.450" ± 0.006" ± 0.003" 100' P SR-PVC/PVC " 0.650" ± 0.006" ± 0.003" 100' P SR-PVC/PVC " 0.700" ± 0.006" ± 0.003" 100' P SR-PVC/PVC " 0.750" ± 0.008" ± 0.003" 100' P SR-PVC/PVC " 0.950" ± 0.008" ± 0.003" 100' P SR-PVC/PVC " 1.150" ± 0.008" ± 0.003" 100' P SR-PVC/PVC " 1.200" ± 0.008" ± 0.003" 100' P SR-PVC/PVC " 1.250" ± 0.008" ± 0.003" 100' P SR-PVC/PVC " 1.650" ± 0.011" ± 0.003" 100' P SR-PVC/PVC " 1.800" ± 0.011" ± 0.003" 100' P SR-PVC/PVC " 1.950" ± 0.011" ± 0.003" 100' P SR-PVC/PVC " 2.450" ± 0.011" ± 0.003" 100' P SR-PVC/PVC " 2.950" ± 0.011" ± 0.003" 100' P SR-PVC/PVC " 3.150" ± 0.011" ± 0.003" 100' Other conductor counts available upon request. Available in 26 AWG (20002) and 30 AWG (20042). All data is for reference only and is subject to change Rainbow Ribbon

24 0.050 Intermittently Bonded Rainbow Ribbon 24 UL Style: UL Voltage Rating: 150V UL Temp: 80 C.050 ± ±.005 Pre-insulated conductors heat bonded. Bonding section repeats every IDC termination section 1.25 wide. APPLICATIONS Internal wiring of appliances, electronic computers or business equipment. <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION This flat Rainbow Ribbon cable is constructed with individually extruded 28 AWG (7/36 stranded ). All primaries are then pulled parallel and bonded intermittently. Cable primaries features ten unique colors: Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White, Black and repeat. Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding ΩΩ/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Nom. Diff. Nom. (Max.) 28 AWG 7/36 PVC No. of Width Span Pitch Standard Approx. Weight Part No. Insulation Conductors W S Tolerance Put-ups lbs/reel P PVC " 0.45" ± 0.008" ± 0.003" 200' P PVC " 0.65" ± 0.008" ± 0.003" 200' P PVC " 0.75" ± 0.011" ± 0.003" 200' P PVC " 0.95" ± 0.011" ± 0.003" 200' P PVC " 1.250" ± 0.011" ± 0.003" 200' P PVC " 1.450" ± 0.011" ± 0.003" 200' P PVC " 1.650" ± 0.011" ± 0.003" 200' P PVC " 1.950" ± 0.015" ± 0.003" 200' P PVC " 2.450" ± 0.015" ± 0.003" 200' P PVC " 2.950" ± 0.015" ± 0.003" 200' 16.5 Other conductor counts available upon request. Other variations include 30 AWG and 26 AWG (20074) cables. All data is for reference only and is subject to change Intermittently Bonded Rainbow Ribbon

25 0.050 TPO Stranded Flat Ribbon UL Style: UL Voltage Rating: 300V UL Temp: 105 C CSA listing: AWM I A/B FT-1 CSA Voltage Rating: 300V CSA Temp: 105 C 25 TPO insulated for superior electrical performance, i.e. high impedance and low capacitance. Outstanding low temperature characteristics. Improved heat aging over conventional PVC. Alternate gauges also available. APPLICATIONS Ideal for higher controlled impedance environments. RED POLARITY STRIPE ON #1 COND EDGE. PHYSICAL CONSTRUCTION DESCRIPTION This 0.050" flat ribbon cable is constructed with 28 AWG stranded tinned copper then fully extruded with a Thermoplastic Olefin (TPO). A red co-extruded stripe is applied in lieu of ink to prevent flaking. Series No Capacitance Impedance Propagation Delay Conductor Conductor AWG Insulation Resistance pf/ft. pf/ft. (G-S-G) (G-S) ns/ft. Skew Stranding Ω/Mft. (G-S) (G-S-G) (Ohms) (Ohms) ns/ft. 20 C SE Diff. (Max.) 28 AWG 7/36 TPO No. of Width Span Pitch Standard Part No. Insulation Conductors W S Tolerance Put-ups P TPO " 0.950" ± 0.008" ± 0.002" 100' P TPO " 1.650" ± 0.011" ± 0.002" 100' P TPO " 1.950" ± 0.011" ± 0.002" 100' P TPO " 2.450" ± 0.011" ± 0.002" 100 Other conductor counts available upon request. Other variations include 24 AWG and 26 AWG cables. All data is for reference only and is subject to change..050 TPO Stranded Flat Ribbon

26 Round to Flat Ribbon 26 UL/CSA Listing: (UL) CM c(ul) 105 C UL Style: 20381, 300V, 105 C CSA Style: AWM llb, 300V, 105 C Choose from Shielded or Unshielded. Shielded cable includes an aluminum tape and braid shield. Cable core features our pitch gray ribbon cable for use with popular IDC connectors. Core is slit 1.50 then bonded 0.75 for ease of termination. APPLICATIONS Appliance wire and consumer products. PHYSICAL CONSTRUCTION DESCRIPTION Cable core consists of slit and bonded flat gray ribbon cable. Core is folded and twisted into a round format before being taped with either Polyester (23149) or Aluminum/Polyester (23122) tape (Al side out). For dual shielded versions, cable is then braided. The core is jacketed in Black PVC.* Series No Conductor Conductor AWG Insulation Shielding Resistance Capacitance Impedance Prop. Stranding Ω/Mft. (G-S-G) (G-S-G) Delay Jacket 20 C pf/ft. (Ohms) ns/ft. 28 AWG AL/PET 7/36 PVC Tape & Braid PVC* None No. of Jacket OD (Ref.) Width Span Part No. Conductors inches mm W S P " 0.750" P " 0.950" P " 1.200" P " 1.250" P " 1.650" P " 1.800" P " 1.950" P " 2.450" P " 2.950" P " 0.750" P " 0.950" P " 1.200" P " 1.950" P " 2.450" Other conductor counts available upon request. This product is available in 30 AWG solid and stranded constructions. Please consult with factory for more information. *Standard jacket color is Black. Other colors are available by special request. All data is for reference only and is subject to change. Round to Flat Ribbon

27 Shielded Flat Ribbon UL Listing: 2912 UL Voltage Rating: 150V UL Temp: 105 C 27 Shielded flat ribbon cable for EMI/RFI/ESD considerations. Two drain wires for insured grounding. Cable core features our popular pitch ribbon cable for ease of termination with most IDC connectors. Choose from a wide selection of conductor counts. APPLICATIONS Ideal for EMI/RFI/ESD PHYSICAL CONSTRUCTION DESCRIPTION Using HCM (page 24) for the core of this shielded cable, two 28 AWG (7/36 ) drain wires are pulled in separate to ensure contact with the Aluminum/Polyester tape (AL side in). The core is jacketed in Black PVC*. Series No Conductor Conductor AWG Insulation Drain Shield Resistance Capacitance Impedance Jacket Stranding Ω/Mft. (G-S-G) (G-S-G) (G-S-G) 20 C pf/ft. (Ohms) 28 AWG (2) 28 AWG 7/36 PVC 7/36 AL/PET Black PVC* No. of Overall Width Span Standard Part No. Conductors A W S Put-ups P " ± 0.035" 0.700" 0.650" 100' P " ± 0.035" 0.750" 0.700" 100' P " ± 0.035" 0.800" 0.750" 100' P " ± 0.035" 1.000" 0.950" 100' P " ± 0.035" 1.250" 1.200" 100' P " ± 0.035" 1.300" 1.250" 100' P " ± 0.035" 1.700" 1.650" 100' *Standard jacket color is Black. Other colors are available upon request. All data is for reference only and is subject to change. Shielded Flat Ribbon

28 0.100 PVC Stranded Wide Pitch Ribbon ± ±.003 T UL Style: 2651 UL Voltage Rating: 300V UL Temp: 105 C CSA listing: AWM I A/B FT-1 CSA Voltage Rating: 300V CSA Temp: 105 C POLARITY STRIPE ON #1 COND EDGE. Rounded edge construction. Dual zip construction between each web. Multiple gauges available to meet your specific needs. Alternate copper coatings and configurations available. APPLICATIONS Internal wiring of electronic equipment. <90ppm <5ppm <5ppm <5ppm <1000ppm PHYSICAL CONSTRUCTION DESCRIPTION Flat planar cable using 22, 24, or 26 AWG stranded tinned copper, extruded in PVC on centers. Conductor number one is marked with a polarity stripe. Standard cable color is gray. Tinned Tinned Topcoated 26 AWG 24 AWG 22 AWG Series No Conductor 26 AWG (7/34) 24 AWG (7/32) 22 AWG (7/30) Insulation PVC PVC PVC Conductor Resistance Ω/1000' 20 C Capacitance pf/ft Impedance G-S-G Ω s Propagation Delay ns/ft Pitch Tolerance ± 0.003" ± 0.003" ± 0.003" Thickness (T) ± 0.003" ± 0.003" ± 0.003" Width (W) (S)pan " (S)pan " (S)pan " Standard Put-ups (Feet) 100 & & & 500 Polarity Stripe Color Blue Black Red Conductor Counts Available 4, 6, 8, 10, 12, 14, 16 5, 6, 7, 8, 10, 28 5, 6, 8, 9, 10, 12, 16, AWG 24 AWG 22 AWG Series No Conductor 26 AWG (7/34) T 24 AWG (7/32) T 22 AWG (7/30) T Insulation PVC PVC PVC Conductor Resistance Ω/1000' 20 C Capacitance pf/ft Impedance G-S-G Ω s Propagation Delay ns/ft Pitch Tolerance ± 0.003" ± 0.003" ± 0.003" Thickness (T) ± 0.003" ± 0.003" ± 0.003" Width (W) (S)pan " (S)pan " (S)pan " Standard Put-ups (Feet) 100 & & & 500 Polarity Stripe Color Blue Black Red Conductor Counts Available 3, 4, 5, 6, 10, 11, 12, 14, 16, 24 10, 12 3, 4, 7, 10, 14, 28 Other conductor counts available upon request. All data is for reference only and is subject to change PVC Stranded Wide Pitch Ribbon

29 0.156 PVC Stranded Wide Pitch Ribbon UL Style: UL Voltage Rating: 300V UL Temp: 105 C CSA listing: AWM I A/B FT-1 CSA Voltage Rating: 300V CSA Temp: 105 C 29 Multiple gauges available to meet your needs. Zip construction. Symmetrically round conductors improves IDC termination. APPLICATIONS Internal wiring of electronic equipment <90ppm <5ppm <5ppm <5ppm <1000ppm.156 ± ±.003 T POLARITY STRIPE ON #1 COND EDGE. PHYSICAL CONSTRUCTION DESCRIPTION Flat planar cable using 18, 20, or 22 AWG stranded copper, extruded in PVC on centers. Conductor number one is marked with a polarity stripe. Tinned Tinned Topcoated Other conductor counts available upon request. All data is for reference only and is subject to change. 22 AWG 20 AWG 18 AWG Series No Conductor 22 AWG (7/30) 20 AWG (7/28) 18 AWG (19/30) Insulation PVC PVC PVC Conductor Resistance Ω/1000' 20 C Capacitance pf/ft Impedance G-S-G Ω s Propagation Delay ns/ft Pitch Tolerance ± 0.005" ± 0.005" ± 0.005" Thickness (T) ± 0.003" ± 0.003" ± 0.003" Width (W) (S)pan " (S)pan " (S)pan " Standard Put-ups (Feet) 100 & & & 500 Polarity Stripe Color Red Brown Orange Conductor Counts Available 3, 4, 9, 10 4, 5, 10 2, 3, 4, 6, 7, 8, 15, AWG 20 AWG 18 AWG Series No Conductor 22 AWG (7/30) T 20 AWG (7/28) T 18 AWG (19/30) T Insulation PVC PVC PVC Conductor Resistance Ω/1000' 20 C Capacitance pf/ft Impedance G-S-G Ω s Propagation Delay ns/ft Pitch Tolerance ± 0.005" ± 0.005" ± 0.005" Thickness (T) ± 0.003" ± 0.003" ± 0.003" Width (W) (S)pan " (S)pan " (S)pan " Standard Put-ups (Feet) 100 & & & 500 Polarity Stripe Color Red Brown Orange Conductor Counts Available 6, 8, 10, 16, 20, 24 10, 12, 15, 18, 24 7, 10, PVC Stranded Wide Pitch Ribbon

30 Ribbonized Automation 30 UL Style: UL Voltage Rating: 300V UL Temp: 150 C Eliminates migrating particles. Trackless construction. Extended flexlife construction. Stackable configuration. APPLICATIONS Robotic, linear motion, pick and place, medical and pharmaceutical, wafer manufacturing and handling. <90ppm <5ppm <5ppm <5ppm <1000ppm Series No. Conductor Primary Shield Tapes Pod Outer Operating All Temp Bend AWG Insulation Jackets Jackets Temp Pods Radius Coating min/max Shielded (19/38) TPC-ET All pods 90% 18 (65/36) BC FEP Braid 26(19/38) TPC-ET All pods 90% 22(19/34) Alloy Braid SPC 24(19/36) 95% PTFE FEP SPC ALLOY spiral BC PU C/80 0 C Yes 1.6 FEP/PTFE C/80 0 C Yes 1.75 Composite Laminated PU EPTFE C/80 0 C Yes (420/34) ETFE 20(41/36) ETFE 90% PU C/80 0 C No (19/34) FEP Dual Spiral 16(105/36) ETFE PHYSICAL CONSTRUCTION DESCRIPTION Various components are laid parallel and fully laminated with PTFE. Each independent construction is made to specific widths and tolerance. Consult the factory for construction options outside of selections below. Total No. of Total No. of Width Thickness Standard Part No. Conductors PODs Pairs inches (nom) inches (nom) Put-ups P P P P Other constructions available upon request and approved design. All data is for reference only and is subject to change. Ribbonized Automation

31 Mini Probe UL Style: 1354 UL Voltage Rating: 30V UL Temp: 80 C 31 Ribbon Twin-Ax design. Flexible. 100 ohm construction. Uses HCM s MCX technology. APPLICATIONS Non-evasive probe devices, test and measurement, CEP and CMOS video. <90ppm <5ppm <5ppm <5ppm <1000ppm.0410 ± ± ± (Ref.).0220 ± ±.002 PHYSICAL CONSTRUCTION DESCRIPTION Using individually extruded PFA primaries, conductors are pulled parallel and taped with PET. Each leg is then braided with 35% braid coverage. Each braided core is then jacketed parallel for a flat cable profile. Series No. Inner Conductor Inner Insulation Shield Jacket AWG Type Material Material Dia. Braid Coating Inner Outer inch AWG Tape Jacket (mm) Cap. Imp. Max pf/ft. (Ω) Cond. (pf/m) Ω/km /46 SC PFA % Silver PET PVC (0.279) (6E/46) (29) No. of No. of Width Span Standard Part No. Twin-Ax Conductors Put-ups S ± ± Other conductor counts available upon request. All data is for reference only and is subject to change. Mini Probe

32 32 Market Applications F rom medical to automotive and everything in between, HCM is driven to exceed your expectations. Medical probe cable, Automotive airbag cable, Computer related standards and Industrial control cables are all part of HCM s product offering. Look to HCM for experience in meeting your wire and cable needs. Aerospace Robotics

33 High Speed Round Cable HCM Round Cable Over the past two decades our factory has invested millions of dollars to improve our ability to make cutting edge products. The following pages are an overview of our standard products and capabilities. 33 Because we pride ourselves in custom cables for our customers, we could not possibly list all of the cables we build here in this catalog. From medical to automotive we have helped design cables that help our society keep moving. Airbags, X-Ray, security systems, CCD dental cameras, scanners, PC s, network devices, wireless applications, broadcast media and more. From Fortune 100 to the local start up company, we can help you with your cable needs. Obsession with making great electronic cable goes beyond this catalog. It is a drive we have to provide cables that are more flexible, smaller in diameter, lower in skew, more stable in impedance with the lowest possible attenuation and cross-talk than any one else in the industry. Check us out on the web.

34 Channel Matrix Infiniband 34 UL /CSA Listing: (UL) CMG c(ul) 75 C Meets UL 444 FT-4 Burn requirements True cabled design for greater flexibility. DDR compatible. Uses HCM Channel Matrix design. APPLICATIONS Infiniband, DDR applications, PCI Express. <90ppm <5ppm <5ppm <5ppm <1000ppm Cond. Resis. Capacitance C Inches mm pf/ft. pf/m Series Nom. Pair Outer No. Cond. Dielectric Primary OD Shield Tape Material Tape Braid Jacket Nom. Diff. Imp. (Ohms) GHz Max -db/ft. (-db/m) GHz Max -db/ft. (-db/m) (1/28) SC (-1.31) (-1.53) (1/28) Flometrics FC ± SC PE AL/PET AL/PET 85% Flex PVC (-1.13) (-1.29) (1/24) SC (-0.92) (-1.17) PHYSICAL CONSTRUCTION DESCRIPTION Basic construction of these cables consists of 2, 8 or 24 parallel-shielded pairs cabled around HCM s patent pending Channel Matrix support. An overall AL/PET tape and braid are applied prior to a flex PVC jacket. Part No S S S S S S S S IB Config. No. of Pairs Recommended Jacket OD Min. bend radius Inch (mm) Inch mm 1x (44.45) x (70.00) x (146.00) x (50.80) x (76.20) x (167.64) x (63.50) x (76.20) Note: Due to the infancy of Infiniband in the industry, design and dimensions are subject to change. Please consult with the factory for the most recent specifications. All electrical values based on cable performance only not finished assembly. All data is for reference only and is subject to change. Channel Matrix Infiniband