MONARCH INDUSTRIES LIMITED 51 Burmac Road, Winnipeg, MB, R2J 4J3 PO Box 429, Winnipeg, MB, R3C 3E4 Phone: (204) Fax: (204)

Transcription

1 MONARCH SURPLUS EQUIPMENT FOR SALE Monarch Industries is expanding production capacity for hydraulic cylinders at its 51 Burmac Road facility. This World Class initiative includes a plant re-layout and the continuous improvement team has identified the following equipment, valued at approximately $1 Million, as being surplus to the continuing operations of this plant. For further information on this equipment, please feel free to contact John Sawatzky at the following: Phone: (204) ext jsawatzky@monarchindustries.com Thank you for your interest in this project Mazak Horizontal Machining Centre HCN 6800 Table Size: 24.8 X Horsepower Spindle Speed: 35 10,000 RPM Spindle Taper: CAT 50 Tool Chain: 160 Pockets X Axis Travel: Y Axis Travel: Z axis Travel: Power On Hours: 12,908 (Feb. 19, 2015) Auto Hours: 11,224 Cutting Hours: 6,057 Available: Aug. 1, 2015 $299,000 (US Funds) This machine has all the bells and whistles spindle probe, 1,000 psi through the spindle coolant, Niagara coolant system, FMS ready. too many options to list. Machine is in great condition and has been expertly maintained by trained millwrights using MP2 maintenance software. June 25, 2015 Page 1 of 6

2 Mazak Horizontal Machining Centre HCN 6800 Table Size: 24.8 X Horsepower Spindle Speed: 35 10,000 RPM Spindle Taper: CAT 50 Tool Chain: 160 Pockets X Axis Travel: Y Axis Travel: Z axis Travel: Power On Hours: 41,504 (Feb. 19, 2015) Auto Hours: 35,574 Cutting Hours: 18,983 Available: Aug. 1, 2015 $269,000 (US Funds) This machine is the slightly older twin of the first machine and has all the same bells and whistles spindle probe, 1,000 psi through the spindle coolant, Niagara coolant system, FMS ready. too many options to list. Machine is in great condition and has been expertly maintained by trained millwrights using MP2 maintenance software Zoller Optical Tool Presetter Smile 400 Software: Windows XP/Pilot 3 Printers: Inkjet & Label $14,900 (US Funds) X axis: 8.3 Z axis: 15.7 Max Tool Dia RFID CHIP in retention knob. Read by tool presetter and machine. Automatically identifies tool. Never use the wrong tool or wrong offset again! Using Mazak s Cybertool database and the RFID chip has eliminated all tooling errors! June 25, 2015 Page 2 of 6

3 Okuma Horizontal Machining Centre MX-60HB Table Size: 24.8 X 24.8 inches 27 Horsepower Spindle Speed: 50 5,000 RPM Spindle Taper: CAT 50 Tool Chain: 100 Pockets X Axis Travel: Y Axis Travel: Z axis Travel: Power On Hours: 77,329 (June 22, 2015) Spindle Hours: 34,229 Cutting Hours: 19,438 Available: Immediately $59,000 (US Funds) Although this machine is older than the Mazak s, it still has the ability to remove material fast and make accurate parts. It too has a Renishaw spindle probe and 1,000 psi through the spindle coolant. The great feature with this machine is that it has only three leveling screws all the rigidity is built into the massive cast iron frame. This makes the machine easy to move and install Okuma CNC lathe LB35 Chuck Size: 15 Hole Through Spindle: 4.33 Hole Through Draw Tube: 3.50 Max Turning Dia: X Axis Travel: Z Axis Travel: Horsepower Power On Hours: 2,200 - see note Spindle Hours: 786 Cutting Hours: 675 Price (US Funds): $50,000 This is a great lathe that will still turn parts within tenths of a thou. Operating system was reloaded in December 2014 and the hours shown are since then. Monarch owned this lathe from new and has all the original documentation. June 25, 2015 Page 3 of 6

4 Okuma CNC lathe L1420 Chuck Size: 15 Hole Through Spindle: 4.33 Hole Through Draw Tube: 3.50 Max Turning Diameter: X Axis Travel: 9.05 Z Axis Travel: /20 HP Price (US Funds): $36,000 Another great lathe from Okuma this one with longer Z axis travel Okuma Vertical Machining Centre MX45VAE Table Size: 20.0 X Horsepower Spindle Speed: 50 7,000 RPM Spindle Taper: CAT 40 X Axis Travel: 30.0 Y Axis Travel: 18.1 Z Axis Travel: 17.7 Power On Hours: 76,410 Spindle Hours: 22,824 Cutting Hours: 14,387 Price (US Funds): $33,000 Okuma VMC with through the spindle coolant. Well maintained machine using MP2 maintenance software. June 25, 2015 Page 4 of 6

5 Okuma Vertical Machining Centre MX45VA Table Size: 18.1 X Horsepower Spindle Speed: 50 7,000 RPM Spindle Taper: CAT 40 X Axis Travel: 22.0 Y Axis Travel: 18.1 Z Axis Travel: 17.7 Power On Hours: 73,215 Spindle Hours: 19,453 Cutting Hours: 12,289 Price (US Funds): $27,000 Japanese built VM C. Machine is equipped with Yuasa rotary table and drive Okuma CNC Lathe L1420 Chuck Size: Available Hole Through Spindle: 3.15 Hole Through Draw Tube: 2.50 Max Turning Diameter: X Axis Travel: 9.05 Z Axis Travel: /20 HP Power On Hours: 91,377 Spindle Hours: 28,138 Cutting Hours: 16,942 Price (US Funds): $33,000 Okuma builds great lathes. This lathe continues to machine accurate parts quickly. June 25, 2015 Page 5 of 6

6 Correa Universal Milling Machine FU-200 Table Size: 19 X Horsepower Spindle Speed: 22 1,120 RPM Spindle Taper: # 50 MM X Axis Travel: Y Axis Travel: Z Axis Travel: 22.5 Price (US Funds): $6,900 Solid traditional milling machine with a horizontal spindle and a vertical attachment. Machine originally built in 1974 and purchased new in 1977, June 25, 2015 Page 6 of 6