Pipe Connection Valves 1

Transcription

1 emale NPT/0,000 psi Pipe Connection Valves /8 " /4 " /8 " /2 " NPT Non-rotating tip stems are standard for on-off service and insure long life on valve seats. Regulating tip stems are available for all valves at no additional cost. Materials include high tensile Type 6 stainless steel for valve bodies, and hardened -4P stainless steel for lower section stems. Packing is Teflon (40 ) standard with optional Viton (0 ), UN-N (200 ) and rafoil (60 ) available at no additional cost. ir operators for remote control operation are available for all valves. (See ir Operator section of catalog). N ( ), N ( ) and NC ( ) N ( ) Two Way Straight Valves Pipe Size Catalog No.* psi Connection Orifice L Thickness L NPT NPT NPT NPT 0-N 0-N 0-NC 0-N 0,000 0,000 0,000 0,000 N N NC N /6" /6" 2 /6" 2 /6" /6" " " " L Two Way ngle Valves Pipe Size Catalog No.* psi Connection Orifice L Thickness NPT NPT NPT NPT 0-2N 0-2N 0-2NC 0-2N 0,000 0,000 0,000 0,000 N N NC N /6" " " " 2 /6" 2 /6" 2 /6" /6" " " " * or valves requiring high temperature rafoil packing in the NPT, or NPT or NPT sizes, add suffix -W to catalog number. (xample 0-N-W.) igh quipment Company 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 2.

2 igh quipment emale NPT/0,000 and,000 psi Pipe Connection Valves /8 " /4 " /8 " /2 " NPT /4 " NPT " NPT Non-rotating tip stems are standard for on-off service and insure long life on valve seats. Regulating tip stems are available for all valves at no additional cost. Materials include high tensile Type 6 stainless steel for valve bodies, and hardened -4P stainless steel for lower section stems. Packing is Teflon (40 ) standard with optional Viton (0 ), UN-N (200 ) and rafoil (60 ) available at no additional cost. ir operators for remote control operation are available for all valves. (See ir Operator section of catalog). N ( ) and N ( ) NC ( ) and N ( ) N ( ) and N (" ) Two Way Straight Valves Pipe Size Catalog No.* psi Connection Orifice L Thickness NPT -N,000 N.20 4 /6" L NPT NPT NPT NPT " NPT -N -NC -N 0-N 0-N,000,000,000 0,000 0,000 N NC N N N /6" /6" /6" /6" /6" " Two Way ngle Valves Pipe Size Catalog No.* psi Connection Orifice L Thickness L NPT NPT NPT NPT NPT " NPT -2N -2N -2NC -2N 0-2N 0-2N,000,000,000,000 0,000 0,000 N N NC N N N /6" 4 /6" /6" 2 /6" 2 /6" 2 /6" 2 2 /6" /6" " * or valves requiring high temperature rafoil packing in the NPT, or NPT or NPT sizes, add suffix -W to catalog number. (xample 0-N-W.) 2.2

3 lbows/tees/crosses complete range of elbows, tees, and crosses is available for all of the tubing connection sizes. Material is high tensile 6 stainless steel. NPT lbows Catalog No. psi Connections - Thickness -22N,000 NPT N " " -22N,000 NPT N " " " -22NC,000 NPT NC " " " -22N,000 NPT N N 0,000 NPT N 2 2 /6" /6" 0-22N 0,000 " NPT N " " 2 /6" 2 /6" NPT Tees C Catalog No. psi Connections - Thickness -2N,000 NPT N -2N,000 NPT N " " " -2NC,000 NPT NC " " " -2N,000 NPT N 2 2 /6" 0-2N 0,000 NPT N 2 2 /6" 0-2N 0,000 " NPT N 4 " 2 /6" 2 /6" C NPT Crosses Catalog No. psi Connections - Thickness -24N,000 NPT N -24N,000 NPT N " " " -24NC,000 NPT NC " " " -24N,000 NPT N 2 2 /6" 0-24N 0,000 NPT N 2 2 /6" 0-24N 0,000 " NPT N /6" 2 /6" igh quipment Company 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 2.

4 igh quipment NPT Straight Couplings Standard material is high tensile 6 stainless steel. Catalog No. psi Connections - Length ex -2N,000 NPT N -2N,000 NPT N " -2NC,000 NPT NC " -2N,000 NPT N 0-2N 0,000 NPT N 2 0-2N 0,000 " NPT N 2 NPT ulkhead Couplings ulkhead couplings are designed specifically for passing a tubing connection through a panel or steel barricade. These couplings include a locknut as shown. Material is high tensile 6 stainless steel. Locknut Catalog No. psi Connections - Length ex ole iameter -2N-,000 NPT N 2 " - 4-2N-,000 NPT N 2 " - 4-2NC-,000 NPT NC 2 /6" - 2-2N-,000 NPT N N- 0,000 NPT N N- 0,000 " NPT N 2-2 NPT Caps Tubing end caps are offered for use in sealing off tubing ends either for temporary use or permanent use such as on small volume reservoirs. Standard material is high tensile 6 stainless steel. Catalog No. psi Connections - Length ex -2N-C,000 NPT N -2N-C,000 NPT N " " -2NC-C,000 NPT NC " -2N-C,000 NPT N 0-2N-C 0,000 NPT N 0-2N-C 0,000 " NPT N 2.4 R 2/2

5 NPT Line ilters The line filters as shown utilize sintered stainless steel filter discs pc./set. Porosities are available as per the chart to the right. If not otherwise specified, 00 micron filter discs are supplied. (One micron = 0.00 millimeters). Material of body, caps and cover is hightensile 6 stainless steel. LOW Catalog No. psi Connections - Length ex Micron Size ilter vailable N,000 NPT N /6" -N,000 NPT N 4 /6" -NC,000 NPT NC 4 /6" -N,000 NPT N 4 /6" NPT all Check Valves all type check valves insure flow in one direction only. Material for body, caps and cover is high tensile 6 stainless steel. LOW Catalog No. psi Connections - Length ex -4N,000 NPT N 4 " -4N,000 NPT N 4 " -4NC,000 NPT NC 4 " -4N,000 NPT N 4 /6" 0-4N 0,000 NPT N /6" 0-4N 0,000 " NPT N 2 NPT Softseat Check Valves Soft seat check valves insure flow in one direction only and can be mounted in any position. These are highly reliable for both gas and liquid service. Standard O-ring (soft seat) material for the sealing surface is una-n (nitrile) with other materials including Teflon and Viton available on request. Temperature is limited by the choice of O-ring material. Material of all other parts is high tensile 6 stainless steel. LOW Catalog No. psi Connections - Length ex -4N-T,000 NPT N 4 " -4N-T,000 NPT N 4 " -4NC-T,000 NPT NC 4 " -4N-T,000 NPT N 4 /6" 0-4N-T 0,000 NPT N /6" 0-4N-T 0,000 " NPT N 2 igh quipment Company 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 2.

6 igh quipment NPT Safety eads The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels. Outlet connections are pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 0 foot pounds, depending upon pressure and media being used. Material of body and hold down nut is high tensile 6 stainless steel. Note: Rupture discs are not included and must be ordered as a separate item. Catalog No. psi Connections Length ex -6NM,000 MNPT " -6NM,000 MNPT " -6NMC,000 MNPT " -6NM,000 MNPT " Rupture iscs /4 " ngled Seat SPCIL ISCS are available on special order for pressure ranges not shown above and in numerous materials and coatings. Consult factory for price and delivery. /4 " effective area Standard rupture discs are available from stock in burst pressures as listed in the chart below. ll pressures through,000 psi are shaded. These discs are 6 stainless steel (except for,000 psi which are inconel) and may be used with any of the safety heads shown. Note that these rupture discs are supplied with a tolerance of plus 6% and minus % of specified burst pressure. Samples of each batch are tested and the actual average burst pressure is stamped on an accompanying metal tag. actors influencing rupture disc life include corrosion, metal fatigue, and cyclic effects. Periodic replacement is recommended to prevent premature failure. Standard urst s (in psi at 2 ),000,00 2,000 2,00,000,00 4,000 4,00,000,00 6,000 6,00,000,00 8,000 8,00,000,00 0,000 0,00,000,00 2,00,000,00 8,000 20,000 22,00 2,000 2,000 0,000,000,00 40,000 4,000 0,000,000 60,000 6,