PXD Series Single and Dual Output 10 to 20W DC-DC Converters
|
|
|
- Adrian Wilkerson
- 7 years ago
- Views:
Transcription
1 Industry Standard 2 x 1 Footprint Six Sided Shielding Agency Approved 12V, 24V and 48V Inputs PXD Series Single and Dual Output 10 to 20W DC-DC Converters PXD Features and Benefits Key Market Segments & Applications Telecom Datacom Point of Load Features UL, CSA, EN, CE Approvals Wide Range Input Six Sided Shielding Benefits Easier System Approvals Less Parts to Inventory Reduced Radiated Noise Specifications ITEMS PXD10 PXD15 PXD20 Max Output Power 10W 15W 20W Voltage Accuracy ±2% ±1% ±1% Voltage Adjustment (Single O/P Only) None None ±10% Minimum Load, each output (1) 10% 10% Single 0%; Dual 10% Line Regulation ±1% ±1% ±0.2% Load Regulation (10% to 100%) Single Output: ±1% Single Output: ±1% ±0.5% Dual Output: ±2% Dual Output: ±2% Cross Regulation (25% to 100%) ±5% Ripple and Noise Single 50mV, Dual 75mV Single 75mV, Dual 100mV Start up time 20ms 10ms Remote on/off (3) Positive Logic: ON: Open or V, OFF Short or <1.2V Negative Logic: ON: Short or <1.2V, OFF: Open or V Temperature Coefficient <±0.02%/ C Operating Temperature -40 C to +85 C (model dependent - see derating curves) Maximum Case Temperature +100 C Storage Temperature -55 C to +105 C Thermal Shock MIL-STD-810D Relative Humidity 5 to 95% (non condensing) Transient Response (25% step load chg.) 500µS recovery 500µS recovery 300µS recovery Overvoltage Protection (Zener clamp) V: 3.9V, 5V: 6.2V, 12V: 15V, 15V: 18V Overcurrent & Short Circuit Protection Typically at 150%, hiccup with self recovery Input Surge Voltage (Max. for 100ms) 12V input: 36V, 24V input: 50V, 48V input: 100V Reflected input ripple (peak to peak) (2) 30mA 20mA 20mA Isolation Voltage 1600VDC minimum Isolation Resistance 109 Ω minimum Isolation Capacitance (max) 300pF 1000pF Typical Switching Frequency (Fixed) 300kHz Single: 500kHz 500kHz Dual: 300kHz MTBF (BELLCORE TR-NWT ) 1,976,000 hours 2,041,000 hours 1,791,000 hours Vibration 10-55Hz, 2G, 30 minutes each X, Y, Z axis Conducted and Radiated Emissions EN55022 Level A Immunity EN , -3, -4, -5, -6 Pref Criteria 2 Safety Agency Approval IEC606950, UL1950, EN60950, CE Mark (48V input only) Size mm (L x W x H) 50.8 x 25.4 x 10.2 Weight (g) 27 Warranty (yrs) 2 PXD Series 1
2 Specification Notes: (1) To meet regulation & noise specifications. Operation at zero load will not damage the device. (2) 12µH source impedance in series with + input (3) Positive logic standard on 20W (see options table). Input current 2.5mA Model Selector 2 Output Output Output Input Efficiency Volt (V) Current (A) Power (W) Volt (V) Model (%) VDC PXD10-12S3P VDC PXD10-24S3P VDC PXD10-48S3P VDC PXD20-12S3P VDC PXD20-24S3P VDC PXD20-48S3P VDC PXD10-24WS VDC PXD10-48WS VDC PXD20-12S VDC PXD20-24S VDC PXD20-48S VDC PXD10-24WS VDC PXD10-48WS VDC PXD20-12S VDC PXD20-24S VDC PXD20-48S VDC PXD10-24WS VDC PXD10-48WS VDC PXD20-12S VDC PXD20-24S VDC PXD20-48S15 87 Dual Outputs ±5 ± VDC PXD15-12D05 83 ±5 ± VDC PXD15-24D05 84 ±5 ± VDC PXD15-48D05 85 ±12 ± VDC PXD10-24WD12 80 ±12 ± VDC PXD10-48WD12 78 ±12 ± VDC PXD20-12D12 86 ±12 ± VDC PXD20-24D12 87 ±12 ± VDC PXD20-48D12 88 ±15 ± VDC PXD10-24WD15 80 ±15 ± VDC PXD10-48WD15 81 ±15 ± VDC PXD20-12D15 86 ±15 ± VDC PXD20-24D15 87 ±15 ± VDC PXD20-48D15 87 Pinout Pin # Function Single Output Dual Output 1 + Input + Input 2 - Input - Input 3 + Output + Output 4 Trim (20W only) Common 5 - Output - Output 6 Remote On/Off Remote On/Off Suffix PXD Series Remote On/Off Options Function -P* Positive Logic -N Negative Logic Example: PXD1548S12-N * Included in PXD20 models Notes: (1) With external ceramic capacitor (24V: 4.7µF, 48V: 2.2µF) connected across input pins (2) For EN & -5 compliance fit external electrolytic capacitor (24V: 330µF, 48V: 220µF) connected across input pins * OTHER MODELS AVAILABLE ON REQUEST * Notes: Remote On/Off is optional on PXD-10 and PXD-15 (add suffix -P or -N if required) Remote On/Off positive Logic is standard on PXD-20 (add suffix -N if negative logic required)
3 Outline Drawing PXD Series Derating Curves PXD Series PXD20 PXD Series 3
4 TDK-LAMBDA EMEA TDK-Lambda France SAS Route de Grivery ZAC des Delaches CS Courtaboeuf Cedex France Tel: Fax: france@fr.tdk-lambda.com Italy Sales Office Via dei Lavoratori 128/ Cinisello Balsamo (MI) Italy Tel: Fax: info.italia@it.tdk-lambda.com TDK-Lambda UK Ltd. Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) Fax: +44 (0) powersolutions@uk.tdk-lambda.com Nemic Lambda Ltd. Kibbutz Givat Hashlosha Israel Tel: Fax: info@nemic.co.il TDK-Lambda Germany GmbH Karl-Bold-Strasse Achern Germany Tel: Fax: info.germany@de.tdk-lambda.com Russia Technical Support: St Petersburg Tel: +7 (812) Sales: Moscow Tel: +7 (499) info@tdk-lambda.ru Austria Sales Office Aredstrasse Leobersdorf Austria Tel: Fax: info.germany@de.tdk-lambda.com LOCAL DISTRIBUTION PXD June11 v3 4 PXD Series
5 Industry Standard 2" x 1" Footprint Six Sided Shielding Safety Agency Certifications 9-36V or 18-75VDC Input Key Market Segments & Applications PXD20W Series Single and Dual Output 20W DC-DC Converters PXD20W Features and Benefits Features Safety Certification Wide range input Six sided shielding Benefits Telecom Datacom Process Control Easier system approvals Less parts to inventory Reduced radiated noise Specifications Single Output Dual Output ITEMS Max Output Power MODEL HWS600 20W HWS1000 Voltage Accuracy ±1% Voltage Adjustment ±10% None Minimum Load None Line Regulation ±0.2% ±0.5% Load Regulation ±0.5% ±1% Cross Regulation (25% to 100%) - ±5% Ripple and Noise See table Start up time 20ms Remote on/off Positive Logic: ON: Open or 3-12V, OFF Short or <1.2V Negative Logic: ON: Short or <1.2V, OFF: Open or 3-12V Temperature Coefficient <+/-0.02%/ C Operating Temperature -40 C to +66 C, derating necessary above 66 C Maximum Case Temperature +105 C Storage Temperature -55 C to +125 C Thermal Shock MIL-STD-810F Relative Humidity (non condensing) 5 to 95% Transient Response (25% step load change) 250µs recovery Overvoltage Protection (Zener clamp) 3.3: 3.9V, 5V: 6.2V, 12V: 15V, 15V: 18V Overcurrent and Short Circuit Protection Typically at 150%, hiccup with self recovery Input Surge Voltage (Maximum for 100ms) 24V input: 50V, 48V input: 100V Reflected input ripple (peak to peak) 20mA Isolation Voltage 1600VDC minimum Isolation Resistance 10 9 Ω minimum Isolation Capacitance (max) 1500pF Typical Switching Frequency (Fixed) 400kHz MTBF (BELLCORE TR-NWT ) 1,620,000 hours Vibration MIL-STD-810F Conducted and Radiated Emissions (1) EN55022 Level A Immunity (2) EN , -3, -4, -5, -6 Safety Agency Certifications IEC , UL , EN , CE Mark Size mm (L x W x H) 50.8 x 25.4 x 10.2 Weight (g) 27 Warranty (yrs) 2 PXD20W Series 1
6 Model Selector Model Output Output Output Input Ripple & Noise Max Output Volt (V) Curr (A) Power (W) Volt (V) (note 3) Capacitance (note 4) Eff.(%) PXD20-24WS3P3 3.3V 5.5A 18W 9-36VDC 60mVp-p 18000µF 85% PXD20-24WS05 5V 4.0A 20W 9-36VDC 75mVp-p 9600µF 88% PXD20-24WS12 12V 1.67A 20W 9-36VDC 75mVp-p 1650µF 86% PXD20-24WS15 15V 1.33A 20W 9-36VDC 75mVp-p 1050µF 86% PXD20-24WD05 ±5V ±2.0A 20W 9-36VDC 100mVp-p ±4800µF 88% PXD20-24WD12 ±12V ±0.83A 20W 9-36VDC 100mVp-p ±825µF 87% PXD20-24WD15 ±15V ±0.67A 20W 9-36VDC 100mVp-p ±525µF 87% PXD20-48WS3P3 3.3V 5.5A 18W 18-75VDC 60mVp-p 18000µF 85% PXD20-48WS05 5V 4.0A 20W 18-75VDC 75mVp-p 9600µF 88% PXD20-48WS12 12V 1.67A 20W 18-75VDC 75mVp-p 1650µF 87% PXD20-48WS15 15V 1.33A 20W 18-75VDC 75mVp-p 1050µF 87% PXD20-48WD05 ±5V ±2.0A 20W 18-75VDC 100mVp-p ±4800µF 89% PXD20-48WD12 ±12V ±0.83A 20W 18-75VDC 100mVp-p ±825µF 88% PXD20-48WD15 ±15V ±0.67A 20W 18-75VDC 100mVp-p ±525µF 88% Specification Notes: (1) With external ceramic capacitor (24V: N/A, 48V: 1µF/100V) connected across input pins (2) For EN & -5 compliance, fit external electrolytic capacitor 220µF/100V, ESR 48MΩ connected across input pins (3) Typical nominal input/output (4) Value with minimum Vin and constant resistive load Remote On/Off Options Suffix 2 Function No Suffix Positive Logic N Negative Logic 2 PXD20W Series
7 Outline Drawing PXD20W Series 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5), X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Pinout Pin # Function Single Output Dual Output 1 + Input + Input 2 Input Input 3 + Output + Output 4 Trim Common 5 Output Output 6 CTRL CTRL Derating Curve PXD20W Series PXD20W Series 3
8 TDK-LAMBDA EMEA TDK-Lambda France SAS Route de Grivery ZAC des Delaches CS Courtaboeuf Cedex France Tel: Fax: france@fr.tdk-lambda.com Italy Sales Office Via dei Lavoratori 128/ Cinisello Balsamo (MI) Italy Tel: Fax: info.italia@it.tdk-lambda.com TDK-Lambda UK Ltd. Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) Fax: +44 (0) powersolutions@uk.tdk-lambda.com Nemic Lambda Ltd. Kibbutz Givat Hashlosha Israel Tel: Fax: info@nemic.co.il TDK-Lambda Germany GmbH Karl-Bold-Strasse Achern Germany Tel: Fax: info.germany@de.tdk-lambda.com Russia Technical Support: St Petersburg Tel: +7 (812) Sales: Moscow Tel: +7 (499) info@tdk-lambda.ru Austria Sales Office Aredstrasse Leobersdorf Austria Tel: Fax: info.germany@de.tdk-lambda.com LOCAL DISTRIBUTION PXD20W Aug11 v1 4 PXD20W Series
9 Industry Standard 2" x 1" Footprint Six Sided Shielding Safety Agency Certifications 9-36V or 18-75VDC Input Key Market Segments & Applications PXD30W Series Single and Dual output 30W DC-DC converters PXD30W Features and Benefits Telecom Datacom Process Control Features Safety Certification Wide range input Six sided shielding Benefits Easier system approvals Less parts to inventory Reduced radiated noise Specifications Single Output Dual Output ITEMS Max Output Power MODEL HWS600 30W HWS1000 Voltage Accuracy ±1% Voltage Adjustment ±10% None Minimum Load None Line Regulation ±0.2% Load Regulation ±0.5% ±1% Cross Regulation (25% to 100%) - ±5% Ripple and Noise <5.1V output: 100mV, 12-15V output: 150mV Start up time 30ms Remote on/off Positive Logic: ON: Open or 3-12V, OFF Short or <1.2V Negative Logic: ON: Short or <1.2V, OFF: Open or 3-12V Temperature Coefficient <+/-0.02%/ C Operating Temperature -40 C to +85 C, derating necessary above 50 C Maximum Case Temperature +105 C (Overtemperature Protection +115 C) Storage Temperature -55 C to +125 C Thermal Shock MIL-STD-810F Relative Humidity (non condensing) 5 to 95% Transient Response (25% step load change) 250µs recovery Overvoltage Protection (Zener clamp) 5V: 6.2V, 12V: 15V, 15V: 18V Overcurrent and Short Circuit Protection Typically at 150%, hiccup with self recovery Input Surge Voltage (Maximum for 100ms) 24V input: 50V, 48V input: 100V Reflected input ripple (peak to peak) 20mA Isolation Voltage 1600VDC minimum Isolation Resistance 10 9 Ω minimum Isolation Capacitance (max) 1500pF Typical Switching Frequency (Fixed) 430kHz MTBF (BELLCORE TR-NWT ) 3,163,000 hours Vibration MIL-STD-810F Conducted and Radiated Emissions (1) EN55022 Level A Immunity (2) EN , -3, -4, -5, -6 Pref Criteria A Safety Agency Certifications IEC , UL , EN , CE Mark Size mm (L x W x H) 50.8 x 25.4 x 10 Weight (g) 30.5 Warranty (yrs) 2 PXD30W Series 1
10 Model Selector Output Output Output Input Volt (V) Curr (A) Power (W) Volt (V) Model Eff.(%) Single Outputs 3.3V 7.5A 24.75W 9-36VDC PXD30-24WS3P3 86% 3.3V 7.5A 24.75W 18-75VDC PXD30-48WS3P3 86% 5V 6.0A 30W 9-36VDC PXD30-24WS05 88% 5V 6.0A 30W 18-75VDC PXD30-48WS05 88% 12V 2.5A 30W 9-36VDC PXD30-24WS12 89% 12V 2.5A 30W 18-75VDC PXD30-48WS12 90% 15V 2.0A 30W 9-36VDC PXD30-24WS15 89% 15V 2.0A 30W 18-75VDC PXD30-48WS15 91% Dual Outputs ±5V ±3.0A 30W 9-36VDC PXD30-24WD05 88% ±5V ±3.0A 30W 18-75VDC PXD30-48WD05 88% ±12V ±1.25A 30W 9-36VDC PXD30-24WD12 87% ±12V ±1.25A 30W 18-75VDC PXD30-48WD12 88% ±15V ±1.0A 30W 9-36VDC PXD30-24WD15 87% ±15V ±1.0A 30W 18-75VDC PXD30-48WD15 88% Specification Notes: (1) With external ceramic capacitor (24V: 4.7uF, 48V: 2.2uF) connected across input pins (2) For EN & -5 compliance fit external electrolytic capacitor (24V: 330uF, 48V: 220uF) connected across input pins Remote On/Off Options Suffix 2 Function No Suffix Positive Logic N Negative Logic 2 PXD30W Series
11 Outline Drawing PXD30W Series Pinout Pin # Function Single Output Dual Output 1 + Input + Input 2 Input Input 3 Remote On/Off Remote On/Off 4 + Output + Output 5 Output Common 6 Trim Output Derating Curve PXD30W Series PXD30W Series 3
12 TDK-LAMBDA EMEA TDK-Lambda France SAS Route de Grivery ZAC des Delaches CS Courtaboeuf Cedex France Tel: Fax: france@fr.tdk-lambda.com Italy Sales Office Via dei Lavoratori 128/ Cinisello Balsamo (MI) Italy Tel: Fax: info.italia@it.tdk-lambda.com TDK-Lambda UK Ltd. Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) Fax: +44 (0) powersolutions@uk.tdk-lambda.com Nemic Lambda Ltd. Kibbutz Givat Hashlosha Israel Tel: Fax: info@nemic.co.il TDK-Lambda Germany GmbH Karl-Bold-Strasse Achern Germany Tel: Fax: info.germany@de.tdk-lambda.com Russia Technical Support: St Petersburg Tel: +7 (812) Sales: Moscow Tel: +7 (499) info@tdk-lambda.ru Austria Sales Office Aredstrasse Leobersdorf Austria Tel: Fax: info.germany@de.tdk-lambda.com LOCAL DISTRIBUTION PXD30W June11 v2 4 PXD30W Series
HFE1600 Series 1600W 1U Hot Swap Front End Power Supplies
25.2W/in 3 power density Internal ORing MOSFET & Current Share Climate Savers Computing efficiency standards Up to 8000W in 1U rack Single and dual output 1U racks PMBus option HFE1600 Series 1600W 1U
TEP 200WIR Series, 180 240 Watt
TEP 200WIR Series, 180 240 Watt Features Chassis mount with screw terminal block Including EMI filter to meet EN 55022, class A Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155
DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20 Series Application Note DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 87% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
S24SE/S24DE series 20W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 88% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models
TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual
EPL225 Series. 225 Watts. www.xppower.com. AC-DC Power Supplies. Models & Ratings. Summary
225 Watts 50 W Convection/ 225 W Forced-cooled Ratings 2 by 4 Footprint Low.26 Profile 2 V Fan Output High Efficiency, up to 95% ITE & Medical pprovals High Power Density Less than 0.5 W No Load Input
Maximum Input Current Vin=18V, 100% Load 12.6 13.1 A
FEATURES Wide input voltage range, 18~60V 200W Output @ 18V~27V Vin range 300W Output @ 27~60V Vin range (Including 27V) Full Load Efficiency up to 88.3% @48Vin Intergrated fuse holder Parallel Connection
Silvertel. Ag5200. 1 Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power
Silvertel V1.1 November 2012 Datasheet Pb 1 Features IEEE802.3at and IEEE802.3af compliant Maximum 30W output power Dual In-Line (DIL) package size 50.6mm (L) x 30mm (W) Overload, short-circuit and thermal
Lockout Hysteresis Voltage 1 2 3 VDC Maximum Input Current Vin=18V, 100% Load 13.0 13.5 A Vin=24V 180 220 ma
FEATURES Ultra wide input voltage range, 18~106V 200W Output @ 18V~27V Vin range 300W Output @ 27~106V Vin range (Including 27V) Full Load Efficiency up to 91.0% @48Vin Intergrated fuse holder Parallel
Single Output Switching Power Supply
.. RS- Code: CLP-A Single Output Switching Power Supply SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY EMC (Note 6) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
R-78xx-0.5 INNOLINE. Features. 0.5 AMP SIP3 Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter
Features Description Efficiency up to 97%,Non isolated, no need for heatsinks Pin-out compatible with LM78XX Linears Very low profile( L*W*H=11.5*7.5*10.2 ) Wide input range.(4.75v ~ 32V) Short circuit
AC-DC Single Output Power Module
AC-DC Single Output Power Module PFHC (AC-DC Conversion) and DC-DC Conversion Integrated in One Package. 2-in-1 Design Concept One module now contains the functions previously only obtainable by combining
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
Delphi Series V48SH, 1/16 th Brick 35W DC/DC Power Modules: 48V in, 1.0V, 35A out
Delphi Series V48SH, 1/16 th Brick 35W DC/DC Power Modules: 48V in, 1.0V, 35A out The Delphi Series V48SH, 1/16 th Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from
UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned
650W Single Output Power Supply
AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent
Analog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
400-800. Series OMEGA WATTS POWER SUPPLY AC/DC SINGLE OR MULTIPLE OUTPUT. Flexible modular design. Programmable outputs** Power factor correction***
INPUT Input protection Thermal protection Switching frequency internal fuse standard 100KHz Input with PFC : (MML400PFC, MML600, MML800) Input voltage range 85*-264VAC Inrush current (peak) MML400PFC
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
55K SERIES 28 Vin DC/DC Converter 75 Watt Single & Triple Outputs
55K SERIES 28 Vin DC/DC Converter 75 Watt Single & Triple Outputs Features High Power Density, Low Profile Packaging Full Output Power at +100 C Baseplate Temperature Switching Power Supply Low Noise Designed
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
APD336.221/.421 3 Outputs 19" DC/DC Converter, 50 Watt
APD336.221/.421 3 Outputs 19" DC/DC Converter, 50 Watt High efficiency: 79% (@ 48V) DCin wide range: 9...36V or 18...72V DC 8 HP plug in width H15 standard pinout Active inrush current suppression Voltage
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V
1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
STRATO LED Drivers 70W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
Product Family of Capacitor Chargers PS-17XX for 1500J/Sec in the range 500Vac to 1,000Vac PS-22XX for 2200J/Sec in the range 500Vac to 1,000Vac
Product Description Capacitor charger power supplies from Digital Power are designed to meet the exacting requirements of medical, aesthetic, and industrial pulsed energy systems. The modular design of
SELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
7.5 Watt AC-DC Switch Power Supply
MAIN FEATURES: 7.5W Small Compact Size PCB Mount Single Output Regulated Output Range : 3.3VDC 24VDC Input Range : 85VAC 265VAC/47 63Hz Or 120VDC 370VDC Very Low Standby Power Consumption < 0.15W Better
www.murata-ps.com D1U54P-W-1200-12-HxxC Series 54mm 1U Front End AC-DC Power Supply Converter www.murata-ps.com/support PRODUCT OVERVIEW FEATURES
www.murata-ps.com PRODUCT OVERVIEW D1U54P-W-1200-12-HxxC Series The D1U54P-W-1200-12-HxxC series are 80 PLUS Platinum effi ciency 1200 watt, power factor corrected front end supplies with a 12V main output
AVD120-48S12. Product Descriptions. Applications. 120 Watts
120 Watts Sixthteenthbrick Converter Page 1 Total Power: 120 Watts Input Voltage: 36 to 75 Vdc # of Outputs: Single Special Features Delivering up to 10A output Ultrahigh efficiency 93% typ. at full load
Delphi Series V48SC, 1/16th Brick 100W DC/DC Power Modules: 48V in, 12V, 8.3A out
Delphi Series V48SC, 1/16th Brick 100W DC/DC Power Modules: 48V in, 12V, 8.3A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
Chrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
350-1200 Watts SHP Series
C-DC 350-1200 Watts SHP Series Rugged Industrial Construction xppower.com Variable Fan Speed for oise Reduction -40 C to +70 C Operation C OK, Remote On/Off and ctive Current Share Screw Terminals 3 Year
AVD75-48S1V2. Product Descriptions. Applications. 30 Watts
30 Watts Sixteenthbrick Converter Page 1 Total Power: 30 Watts Input Voltage: 36 to 75 Vdc # of Outputs: Single Special Features Delivers up to 25A output Ultrahigh efficiency 87% typ. at half load and
47000 SERIES - ELECTRONIC TRANSFORMERS
7000 SERIES - ELECTRONIC TRANSFORMERS MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology. They constitute an interesting alternative to the traditional
Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out
Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
Instruction Manual PFE300S 500S SERIES. TDK-Lambda PFE300S 500S Series INSTRUCTION MANUAL
PFE300S 500S SERIES Instruction Manual TDK-Lambda PFE300S 500S Series BEFORE USING THE POWER SUPPLY UNIT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
DC/DC converter Input 36-72 Vdc Output up to 15A/60W
PKG 4000 I DC/DC converter Input 36-72 Vdc Output up to 15A/60W Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.) Efficiency typ 86% (5 V) at full load 1500 Vdc isolation voltage MTBF >200 years at +75 C case
NFF Series. CoolX600 NFF Series Cool. Patented Resonant Technology. NFF Series; No Fan Featured
Cool TM 600 NFF Series Patented Resonant Technology NFF Series; No Fan Featured 100% natural convection cooled No internal or external fans needed No base-plate needed No Acoustic Noise or Vibrations &
Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class
NOT RECOMMENDED FOR NEW DESIGNS
28 Volt NOT RECOMMENDED FOR NEW DESIGNS Features Attenuation 0 db from 110 khz to 0 MHz Operating temperature - to +8 C Nominal 28 V input, 0 V to 0 V operation 1.7 to A throughput current Transient suppression
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices
RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,
APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP
Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
Limited Ericsson Internal
Limited TABLE PRODUCT OF CONTENTS SPECIFICATION 1 (1) (3) SEC/D Kevin Chen 152-EN/LZT146311 1/131-BMR632 Technical Uen Specification PKL 4 PI series 26-12-4 27-1-11 B D DC/DC converters, Input 36-, Output
LDO03C/LDO06C/LDO10C
NEW LDO03C/LDO06C/LDO10C A p p l i c a t i o n N o t e 1 8 6 1. Introduction 2 2. Models Features 2 3. General Description Electrical Description 2 Physical Construction 2 4. Features and Functions Wide
DC-DC Converter Module
45 Features DC input range: 250-425V Input surge withstand: 500V for 100ms DC output: 24V Programmable output: 10 to 110% Regulation: ±0.2% no load to full load Efficiency: 88% Maximum operating temperature:
MIC2940A/2941A. Features. General Description. Applications. Pin Configuration. 1.2A Low-Dropout Voltage Regulator
MIC294A/2941A 1.2A Low-Dropout oltage Regulator General Description The MIC294A and MIC2941A are bulletproof efficient voltage regulators with very low dropout voltage (typically 4 at light loads and 35
Actuator-Sensor-Interface
Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current
STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load
MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description
Voltage Transducer for DC Voltages TERFACE Data Sheet 000_en_0 PHOENIX CONTACT - /00 Description The MCR voltage transducer measures DC voltages in several signal ranges from 0... ±0 V DC to 0... ±0 V
UMEC International Corporation
UP1301A SERIES 130 Watt Open Frame Switchers Small Size 3*5*1.2(inches) Universal Input to 264 VAC Low Power Consumption Overvoltage Protection Continuous Short Circuit Protection Over Temperature Protection
LM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
1.5A Very L.D.O Voltage Regulator LM29150/29151/29152
FEATURES High Current Capability 1.5A Low Dropout Voltage 350mV Low Ground Current Accurate 1% Guaranteed Initial Tolerance Extremely Fast Transient Response Reverse-Battery and "Load Dump" Protection
Aluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
* Requires external power line filter and hold up capacitors; see typical applica on circuit and app notes for details
The 8500 module contains all of the necessary circuitry for complete power line compliance with aeronau cs specifica on RTCA/DO 60G and Boeing's D6 36440(C)*. It is a pin for pin and form fit compa ble
Silvertel. Ag9800M. 1. Features. 2. Description. Miniature PoE Module. Small SMT package. IEEE802.3af compliant. Low cost
Silvertel V1.2 December 2014 Datasheet Ag9800M Miniature PoE Module Pb 1. Features Small SMT package IEEE802.3af compliant Low cost Input voltage range 36V to 57V Minimal external components required Short-circuit
Industrial Power Supplies
TSP-Series Innovative and Powerful Features! Rugged metal case for harsh industrial environments Shock and vibration proof Worlwide Safety approval package. ATEX certification tested in accordance to IECEX
www.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 15W Output Switching ower Supply NFM-15 s e ries SECIFICATION MODEL OUTUT
CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000
Electrical Specification for: CPCI-3U-AC-300W-R Rugged 300W AC Input 3U CompactPCI Power Supply Telkoor Part Number: 900-4602-0000 GENERAL SCALE RELEASE DATE 12/9/06 SHEET 1 OF 6 REVISION HISTORY Rev Level
MODEL TUHS3F05 TUHS3F12 TUHS3F24 VOLTAGE[V] AC85-264 1f DC120-370
![MODEL TUHS3F05 TUHS3F12 TUHS3F24 VOLTAGE[V] AC85-264 1f DC120-370](/thumbs/40/21139431.jpg "MODEL TUHS3F05 TUHS3F12 TUHS3F24 VOLTAGE[V] AC85-264 1f DC120-370")
AC-DC Power Supplies PCB Mount Type TUHS3 Ordering information TUH S 3 F 05 1 2 3 4 5 R 1 Series name 2 Single output 3 Output wattage 4 Universal Input 5 Output voltage *Avoid short circuit between +BC
Vanguard DC /DC-Technology - worldwide -
Vanguard DC /DC-Technology - worldwide - Catalogue INTERNATIONAL POWER For new s and latest product updates see: INTERNATIONAL POWER Vanguard DC/DC-Technology - worldwide ECONOLINE INNOLINE POWERLINE When
Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1
Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input
28 Volt Input - 40 Watt
Features Powers 28 volt dc-dc converters during power dropout Input voltage 12 to 40 volts Operating temperature -55 to +125 C Reduces hold-up capacitance by 80% Inhibit function Synchronization function
CliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I Div. 2
CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660
CMOS Switched-Capacitor Voltage Converters ADM66/ADM866 FEATURES ADM66: Inverts or Doubles Input Supply Voltage ADM866: Inverts Input Supply Voltage ma Output Current Shutdown Function (ADM866) 2.2 F or
R4D0-FB-IA* FieldBarrier. Features. Assembly. Function. Connection IN + - S OUT ... ... Spur 2. Spur 1. Zone 1. Zone 0
FieldBarrier Features Assembly 8... 12 outputs Ex ia IIC, FISCO and Entity Advanced fault isolation and diagnostics at the spur FieldBarrier in Zone 1/Div. 2 Instruments in Zone 0...1/Div. 1 For FOUNDATION
DCS Series 1 kw, 1.2 kw, & 3 kw
DCS Series 1 kw, 1.2 kw, & 3 kw AVAILABLE WITH LXI STANDARD COMPLIANT ETHERNET Applications Automotive Electronics Rackmount ATE System Battery Charging DCS Series DCS Series: 1 kw, 1.2 kw, & 3 kw DCS
I STAR COMPUTER CO., LTD
I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON
MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
Product Overview 2Pro AC Devices Provide Overcurrent/ Overvoltage/Overtemperature Protection for AC Industrial and Appliance Applications
Product Overview Provide Overcurrent/ Overvoltage/Overtemperature Protection for AC Industrial and Appliance Applications The 2Pro AC family of devices provide integrated overcurrent/overvoltage/ overtemperature
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv
LM117 LM317A LM317 3-Terminal Adjustable Regulator
LM117 LM317A LM317 3-Terminal Adjustable Regulator General Description The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1 5A over a 1 2V to 37V
FM TRANSMITTER & RECEIVER HYBRID MODULES. FM-RTFQ SERIES FM-RRFQ SERIES. Transmitter. Receiver. Applications
FM Radio Transmitter & Receivers Available as or or 868MHz Transmit Range up to 20m Miniature Packages Data Rate up to 9.6Kbps No Adjustable Components Very Stable Operating Frequency Operates from 20
L7800 SERIES POSITIVE VOLTAGE REGULATORS
SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5 A OUTPUT VOLTAGES OF 5; 5.2; 6; 8; 8.5; 9; 12; 15; 18; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSITION SOA PROTECTION
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
GWS250 Series Instruction Manual
GWS250 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit
LM79XX Series 3-Terminal Negative Regulators
LM79XX Series 3-Terminal Negative Regulators General Description The LM79XX series of 3-terminal regulators is available with fixed output voltages of b5v b8v b12v and b15v These devices need only one
Top Microsystems Proprietary Specification P/N: W090015HK-XP 022410RB-082709V.A0 SPECIFICATION
SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs 90-264VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including
Description. Table 1. Device summary
2 A positive voltage regulator IC Description Datasheet - production data Features TO-220 Output current up to 2 A Output voltages of 5; 7.5; 9; 10; 12; 15; 18; 24 V Thermal protection Short circuit protection
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODELS: 61-763 61-765
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODELS: 61-763 61-765 The Service Information provides the following information: Precautions and safety information Specifications Performance test procedure Calibration
Datasheet. Arrant-Light Oy. 120W DR Series 3.8.2015
3.8.2015 Arrant-Light Oy Datasheet 120W DR Series DR120 Series 120W Single Output LED Driver Features: Constant current and voltage output Universal AC input 100~305VAC Built in active PFC function Output
Aluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
LM138 LM338 5-Amp Adjustable Regulators
LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range
Antec TruePower User's Manual
User s Manual Antec TruePower User's Manual Antec TruePower ATX12V power supply Models: TRUE330, TRUE380, TRUE430, TRUE480, TRUE550 Antec Low Noise Technology: The Antec TruePower power supply is equipped
1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
SPI-8001TW. Switching Regulators. Dual 1.5 A, DC/DC Step-Down Converter. SANKEN ELECTRIC CO., LTD. http://www.sanken-ele.co.jp/en/
Data Sheet 27469.301.1 Designed to meet high-current requirements at high efficiency in industrial and consumer applications; embedded core, memory, or logic supplies; TVs, VCRs, and office equipment,
APPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS. RJ12 connectors
APPENDIX APPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS RJ12 connectors Pin # 1 Signal Name Not Used 2 +TR Description + Data Line 3 +R Remote OFF Required or Remote OFF control 4 -TR 5 Not Used 6 RTN -
+5 V Powered RS-232/RS-422 Transceiver AD7306
a FEATURES RS- and RS- on One Chip Single + V Supply. F Capacitors Short Circuit Protection Excellent Noise Immunity Low Power BiCMOS Technology High Speed, Low Skew RS- Operation C to + C Operations APPLICATIONS