Dokument/Document: Specification Nr./No.: Side/Page: 1. Av/Of: 9. Dato/Date: 03 Januar 2001 Rev.Nr./No.: 01. Sign: JOK

Transcription

1 Januar 20 Refrigeration plant for freeze-ships dimensioned from the following data: Ambient air temperature: 25 C Seawater temperature: 20 C Refrigerant: Storage temperature: approx. -30 C Thermal figures for insulation in the cargo: 0.46 W / m² K Sprinkle Mart, the main power: 3 x 220 V, 50 Hz Sprinkle Mart, control power: 220 V, 50 Hz Freezer: Room 1: 710 m3 Room 2: 721 m3 Room 3: 1058 m3 Room 4: 270 m3 Room 5: 700 m3 Refrigeration Performance: Refrigeration Performance total at 20 C sea water: approx. 267 kw at a -38 C Refrigeration plant is designed for direct expansion of refrigerant and is intended for semiautomatic operation and management. Compressors are equipped with manual and automatic stepless capacity regulation from 100 to 10%, and controlled by a Unisab II for each compressor. These paired for serial execution of the compressors, and you will always get the most optimal utilization of the compressors. The plant has Recive which holds the filling. Liquid-utskilleren is equipped with a sub-cooling coil, and the Guard to report on fulfillment of the liquid. Storage Space fordamperne is equipped with automatic varmgassavriming. Fordamperne is made of galvanized steel construction and with lamellavstand ca.12 mm. The individual components of the machinery is designed according to the current requirements from the Norwegian Veritas, and containers / VV, where the certificate is required, will be delivered with DNV certificate.

2 Januar 20 The offer includes: 2 Sabro SCREW COMPRESSOR GENERATORS FOR : Propulsion Type: SAB 128 HF Rotor diameter: mm Rotor length / diameter: 1.7 Revolutions per minute for hunrotor: 250 rpm Suction Volume: 456 m³ / h Refrigeration Performance of -38 / +25 C: kw Power consumption by -38 / +25 C: 83.2 kw Refrigeration Performance of -25 / +25 C: kw Power consumption by -25 / +25 C: 88.6 kw Refrigeration Performance of -30 / +25 C: kw Power consumption by -30 / +25 C: 87.4 kw Refrigeration Performance of -40 / +25 C: 124 kw Power consumption by -40 / +25 C: 82.1 kw Electro-Motor, IP 23, F-class with thermistors: 110 kw Oil Draft depending on operating conditions: 5-30 ppm Each unit include equipped with: Automatic relief at the start. Automatic and manual capacity control system including solenoid valves for sleidestyringen which allows stepless adjustment from 100 to 10%. Mechanical sleideposisjonsindikator Non-return valve in the compressor suction pressure wire and cable that prevents the reversal of stopping. Horizontal oil separator complete with oil reservoir, oil level glass, finoljefilter with interchangeable input and magnetic strip, safety valve, oljeavtappingsventil, heating element for the standstill heating and oil filter. Seawater-cooled oil cooler. Oil Prime Pump / oil fill pump with 1.8 kw electric motor Flexible shaft coupling with coupling monitor Complete mounted on a steel frame and internally connected with pipes and valves for the oil and refrigerant, as well as complete electrical connection of the control current page. Vibration dampers marine construction 2 UNISAB II Microprocessor control and monitoring PANEL. Unisab II panel is fully installed and connected to the compressor unit and has, among other things following breed detection and security: Suction Pressure, delivery pressure, differential pressure, overhetning, pressure temperature, oil

3 Januar 20 temperature, sleideposisjon, suction pressure control, power limiting, motor protection, emergency and releutgang for alarm. Unisab II is equipped with low pressure 1 and 2 pressure sensors and 3 temperature sensors. For other features appear to separate brochure. 2 MARINE Condenser of horizontal rørkjeltype for sea water, complete with connections for cooling media and flenstilslutninger for seawater. The pipes that seawater circulates through the stainless steel tubes of alloy CrNiMo, welded to rørplater also CrNiMo. The casing is of steel plate, and end caps, which are easy to remove for cleaning of the pipes are of cast steel with seawaterresistant coating of Rilsan. Capacitor is equipped with safety valve, venting valve and interchangeable plugs erode. Manufacturer: Sabroe Type: CONC Gas Affected area: 00 m². Water speed: 1.75 m / sec. Flow-rate: 45.4 m3 / h Pressure drop: 3.7 Necessary valves: Danvalve Necessary safety valves: Danvalve 1 MAIN VALVE FOR HOT gas line for limiting the hot gas outlet of defrosting. 2 COOLING PUMP VANNS for condenser supplied already assembled on the base plate directly attached to a short-circuit the electric motor in close encapsulated design. The pump house and have run wheels of bronze and stainless steel shaft and mechanical shaft seal. Courtesy flow: approx. 60 m³ / h to 15 MVS Speed: 250 rpm Motor, IP 54: 7,5 kw 2 FREQUENCY REGULATOR with pressure transmitter for the regulation of the speed of the sea water pump for the condenser. Product Danfoss. 1 RECEIVER of horizontal marine type, complete with venting valve, safety valve and the necessary inputs for the connections. Manufacturer: Sabroe Volume: approx. 850 liters Necessary valves: Danvalve Necessary safety valves: Danvalve 1 FILTER SYSTEM with replaceable filter and stop valves for the main liquid fuel line. 1 scrubber of vertical marine type, steel construction, complete with the necessary inputs for the to and departure, provided with equipment for level alarm. Manufacturer: Sabroe Volume: 1105 liters Capacity: 240 kw Mass Power: 100 m3 / h

4 Januar 20 Necessary valves: Danvalve Necessary safety valves: Danvalve All the pipes in the engine room is supplied and installed in the "black" finish. 1 Evaporators ROM 1: 2 pcs. Fincoil: AHBE D-KK-Dx Kuldeydelse rates. evaporate / total: 16.6 kw / 33.2 kw Number of fans / power: 4 / 0.67 kw Cooling Area: 14 m2 1 Evaporators ROM 2: 1 pc. Fincoil: AHBE D-KK-Dx Kuldeydelse rates. evaporate / total: 16.6 kw Number of fans / power: 4 / 0.67 kw Cooling Flat rates evaporates: 14 m2 2 pcs. Fincoil: AHBE D-KK-Dx Kuldeydelse rates. evaporate / Total: 8.18 kw / kw Number of fans / power: 2 / 0.67 kw (4 / 0, 67 kw)

5 Januar 20 Cooling Flat rates evaporates: 74.3 m2 1 Evaporators ROM 3: 2 pcs. Fincoil: AHBE D-KK-Dx Kuldeydelse rates. evaporate / total: 25.2 kw / 50.4 kw Number of fans / power: 5 / 0.67 kw Cooling Flat rates evaporates: 223 m2 1 Evaporators ROM 4: 2 pcs. Fincoil: AHBE D-KK-Dx Kuldeydelse per evaporates / Total: 6.45 kw / 12. kw

6 Januar 20 Number of fans / power: 2 / 0.34 kw Speed: 1370 rpm Cooling area: 62 m2 1 Evaporators ROM 5: 2 pcs. Fincoil: AHBE D-KK-Dx Kuldeydelse per evaporates / total: 16.6 kw / 33.2 kw Number of fans / power: 4 / 0.67 kw Cooling Area: 14 m2 7 VENTILATOR FOR MACHINERY SPACE. The fans customized events in the boat. Air flow rates. Fan: approx. 000 m3 / h Static pressure: ca. 600 Pa Speed: 250 rpm Fan motors: 2.6 kw

7 Januar 20 1 SET Self and valves for the, consisting of the stop valves, control valves, avrimingsventiler, solenoid valves, romtermostat mm, the fuse of the proper operation of the facility and for security reasons. 1 PIPE AND FITTINGS for, the pairing of the above equipment, out in the baggage room. Pipes and rørfittings comes in stainless steel in quality AISI COLD TECHNICAL ASSEMBLY for system, including pressure testing vakummering and test drive. 1 ISOLERING with sell rubber on cold pipes. 1 FIRST Filling the system with refrigerant and oil. 1 ELECTRICAL SKAP with Y / D starter for compressor motors placed in the freezer engine room. El.skap for placement in the truck garage with contactors for direct starting of machinery other motors, supplied with control power switches and signal lamps. Thermostats for operations at the freezer, everything. Keel, with digital display of temperature. Control current circuit for the individual contactors are brought to the marked terminal blocks. 1 TEMPERATURE LOGGER: Product: Cold Guard Type: EF 6000 Temperature Sensor, number: 10 Junction box, number: 5 Network cable: 100m Printer: Canon BJC-250 Center can be connected up to 144 sensors, and can by its own software connected the ship's computer. 6 Sabro UNISAFE SENSOR for placement in the engine room and cargo holds, as well as the safety valve's Common utløpsrør according to DNV's rules. For further information and specification: See attached brochure. 6 Instruction, 2 with the Danish text, 2 with english text and 2 with Russian text. 3 SET DRAWINGS comprehensive chart, electric principle diagram and Technical drawing of the individual main components. 1 SHIPPING COSTS to the shipyard in Norway.

8 Januar 20 1 PARTS according YORK Refrigeration standard delivery scope for plant type. Spare The scope will mainly involve the below-mentioned, but may be revised by agreement with the shipping company: Spare Overview: For the compressor unit SAB 128 HF: For the oil filter: Oil filter elements, o-rings, gaskets For condenser CONC: 1 set erode plugs with gaskets For system in general: 1 gasket kit for each valve size of the plant 2 coil for magnetic-and main valves 1 thermostat freezer full 1 thermostat cooling complete For electrical cabinet: 1 coil for each kontaktorstørrelse Refrigeration Medium: 2 cylinders with a refrigerant around. 55 kg, including cylinders and fees. Butter Oil: 2x20 l. butter oil

9 Januar 20 EXCEPT FROM THE OFFER: Bringing on board the vessel Transportation costs for yard area All marine works, such as foundations on board for the machinery and fixtures of cargo Pull-Bolts, røroppheng o.l. for evaporators and forbindelsesrør Insulation materials and work for cargo and cold forbindelsesrør Scotland and deck penetrations Pipelines with valves and fittings for capacitors and oil kjølerne the seawater side Electrical wiring with fittings Any spare filling of refrigerant and oil Fire Insurance