CONX MODULAR PIPE RACK

Transcription

1 CONX MODULAR PIPE RACK

2 2 Modular Pipe Rack ConX Modular Pipe Rack System FASTER BETTER Covered by the following: U.S. P.N. 6,837,016; 7,051,917; 7,021,020; 7,621,099; Australia Pat. No ; Canada Pat. No. 2,458,706; China Pat. No. ZL ; Japan Pat. No s ; ; Mexico Pat. No. 262,499; EPat. No (DE, ES, FR, GB, IE, IT, NL, SE, TR); India Pat. No. 219,425. Other U.S. and Foreign Patent Protection Pending. Copyright 2010 ConXtech, Inc. All rights reserved. SAFER Covered by the following: U.S. P.N. 6,837,016; 7,051,917; 7,021,020; 7,621,099; Australia Pat. No ; Canada Pat. No. 2,458,706; China Pat. No. ZL ; Japan Pat. No s ; ; Mexico Pat. No. 262,499; EPat. No (DE, ES, FR, GB, IE, IT, NL, SE, TR); India Pat. No. 219,425. Other U.S. and Foreign Patent Protection Pending. Copyright 2010 ConXtech, Inc. All rights reserved.

3 A System Comprised of Standard Connections and Details Modular Pipe Rack 3 The ConX Chassis Based Modular Pipe Rack System is an ideal solution for the efficient design, fabrication and construction of pipe rack and processing structures. ConXtech and its growing network of certified fabricators leverage ConXtech s standardized connectors and employ automated manufacturing technologies to deliver modular and typically brace-free structures. This technology assisted approach accelerates design through construction allowing industrial facilities to come on-line months or years earlier vs. more conventional structural options. Standardization around a simple common connection in a structure enables unprecedented efficiencies while significantly reducing risk, complexity and cost. The design of a ConX structure is dramatically simplified by using a small set of ConX details instead of the hundreds or thousands of unique, custom designed and hand crafted details used in conventionally designed structures. This system is what ConXtech calls Chassis Based Modular. Robust ConX connections are at the heart of the system. They are unique in the fact that no field welding is required. They are comprised of a set of four mating steel connectors that are factory welded onto wide flange beam ends and square columns (HSS or box). Beams are lowered and locked around the four sides of a square column resulting in a robust bi-axial moment collar. This modular rack comprised of ConX columns and beams is easily transported and safely and rapidly assembled in the mod-yard (modules) or field (stick-built). The ConX connections provide an inherently seismic, blast and progressive collapse resistant structural chassis. Standardization streamlines structural design and analysis and enables material optimization. ConX is intuitive to assemble and ideal especially where there is a shortage of qualified and skilled labor. Since it is based around a bolted connection, the system allows for future expansion and reconfiguration. Structural members and optional accessories can safely and easily be attached or removed as required. ConXtech has also developed foundation systems, layout tools and templates which ensure unprecedented accuracy and predictability in the field.

4 4 Modular Pipe Rack ConX Systems Sized Right for Different Structural Applications ConXL TM System Field Assembly Rate: Typically 5 MH/Ton ConX Moment Connection (Fixed) ConX Moment Connection (Fixed) ConXL TM 300 HSS or BOX Column Size: Nominal 300mm (12 square) Variable Beam Depth*: 14 to 24 Variable Beam Spans**: 12 to 30 * Allowable beam depth can be greater than or less than this range, dependent upon structural performance criteria. ** Allowable spans may vary from those shown above, dependent on beam tributary area and floor loading. ConXR TM System Field Assembly Rate: Typically 5 MH/Ton ConXL TM 400 HSS or BOX Column Size: Nominal 400mm (16 square) Variable Beam Depth*: 18 to 44 Variable Beam Spans**: 18 to 65 ConX Moment Connection (Fixed) ConXR TM 100 HSS Column Size: Nominal 100mm (4 square) Fixed Beam Depth: 6 (W 6X9) Variable Beam Spans**: 4 to 10 ConX Moment Connection (Fixed) ConXR TM 200 HSS Column Size: Nominal 200mm (8 square) Fixed Beam Depth: 12 (variable weight) Variable Beam Spans**: 8 to 24 ** Allowable spans may vary from those shown above, dependent on beam tributary area and floor loading. ConX Gravity Connection (Pinned) Used in in conjunction with all ConX Moment Connection Systems ConX Gravity Connection (Beam to Beam) ConX Gravity Connection (Beam to Column)

5 How the Collar Connectors Work ConX is the only connection in the world where all six degrees of restraint (X, Y, Z, Mz, My & T) are achieved when the gravity seated tapered interface is Lowered & Locked into place. The connection capacity is then Fixed by installation of collar bolts which provide the full capacity of the attached members on all axes in a fully rigid connection. The Connection Technology Modular Pipe Rack 5 Square columns serve as the vertical structural members of ConX structures. These columns are manufactured in a controlled factory environment by welding four tapered mating collars to the column at the specified elevation. Columns are later filled with concrete to mitigate corrosion and potential trapped gases as well as optimize column steel thickness. With ConXR, the mating collars are welded to the face of an 8 x8 HSS column. ConXL uses a slightly different connection design with connectors welded to the corners of 16 x16 HSS or box columns. ConX Columns ConX beam assemblies have moment connector plates factory welded to both ends of wide flange beams (moment/moment ConX beams), or two plasma cut gravity connectors on both ends of the beam (gravity/ gravity ConX beams). ConX beams can also have a gravity connector on one end, and a moment connector factory welded to the other (gravity/ moment ConX beams). ConXR uses a 12 deep machined connector plate with a tapered dovetail design. ConXL uses a tapered upper and lower flange plate configuration which is adaptable to different beam depths. ConX Beams During the field assembly process, ConX beams are Lowered & Locked TM into place between ConX columns from the top down. The connectors immediately and easily lock into place resulting in an instantly stable connection. Mitered vertical edges of the connectors allow four identical plates to surround a column and form a ConX collar. ConX Collars

6 6 Modular Pipe Rack Safety - Built into Every Connection Gravity stabilied Lower & Locking connections bring immediate stability to structure without adding bolts. No field welding mitigates risk: - Eliminates heat on structure - Mitigates need for walking steel Fewer man hours = lower risk Assembly typically performed from man lifts Integrated modular components enhance safety: - Self Aligning Stacking/Lifting Lug (SLLUGTM) for rigging, hoisting and stacking modules - Reusable Modular Access Platforms - ConX Module Assembly Stand Lower & Locking connections provide opportunity for safe disassembly and reassembly

7 Modular Pipe Rack 7 Getting Started with ConX ConXtech begins working with owners and their design teams early in the process. Most often this is during the site evaluation and feasibility study period. Conceptual Design Once the program goals are defined, ConXtech s integration experts collaborate with the team to understand application, loading and other project specific requirements and then quickly identify the optimal ConX System for the particular project and propose an appropriate framing plan to generate a 3D model. At this stage ConXtech and/or our certified fabricators can provide budgetary numbers and an estimated fabrication and field assembly schedule. Design Development ConXtech has developed ConXCAD digital toolkits to combine the design, fabrication and field assembly processes into an integrated software solution. A virtual ConX Modular Pipe Rack (Digital Chassis) is quickly configured during the earliest design phase of the project. This automated and systemic approach, with a finite number of structural elements, enables a revised structural budget to be quickly generated as plans evolve. Construction Documentation Creating the documentation required to design, structurally evaluate, and fabricate a steel superstructure conventionally is a time-consuming and fragmented process. The ConX Digital Chassis provides the basis for the final structural analysis, detailing, as well as all of the data that drives the automated manufacture of ConX assemblies.

8 8 Modular Pipe Rack Digital Design Workflow in a 3D modeling environment A predictable ConX Modular Pipe Rack steel frame (Digital Chassis) is quickly configured at the earliest design phases of the project. The ConX steel frame can be initially modeled in plant design software like PDMS and SmartPlant 3D or ConXtech can rapidly define the ConX frame in the steel design and detailing software Tekla Structures. In either workflow, the 3D model can be electronically exchanged using industry standard file formats such as SDNF (Steel Detailing Neutral File) and CIS2 (CIM Steel). As the piping design progresses, there may be a change in the number of pipe support and anchor load support beams required on the structure. Using Navisworks, ConXtech and the piping designers store saved locations and redline changes directly in the 3D model. Clashes can also be automatically found and then resolved between the piping and structural steel.

9 Modular Pipe Rack 9 The digital ConX Modular Pipe Rack in Tekla Structures includes an as built level of detail all the way down to every nut and bolt that will be used in the field. By having this high level of detail, ConXtech electronically extracts all of the Bill of Materials, shop, and erection drawings directly from the 3D model. This rapid extraction of data from a single database helps compress the project schedule and increase the volume of manufacturing production that can be processed. ConXtech also automatically extracts CNC information that drives cut and drill machines in the shop to help insure fabrication quality and field fit-up. The 3D model contains all of the profile, weight, piece mark, as well as grid and top of steel information. This allows ConXtech s field superintendents and project managers to easily plan shipping truck loads and the erection sequence of steel by simply picking the pieces in the 3D model. Isometric erection drawings and sorted erection order reports are then automatically generated from the 3D model.

10 10Modular Pipe Rack ConX Modular Chassis Components 1. Pipe Support Beam Moment (BMM) 2. Pipe Support Beam Gravity (BGG) 3. Anchor Support Beam 4. Column (CM - HSS) (CB - Box) Stick Built Footing shown For Module Assembly Components See Page Pipe Support Beam Moment (BMM) 2. Pipe Support Beam Gravity (BGG) 3. Anchor Support Beam 4. Column (CM) 5. Added Upper Level with Moment Connection 6. Added Upper Level with Gravity Connection 7. T-Support Assembly 8. Trapeze Assembly 9. Cantilever Outrigger

11 Modular Pipe Rack 11 Optional ConX Accessories 5. Column Extension with Moment Connection 6. Column Extension with Gravity Connection 7. T-Support Assembly 8. Trapeze Assembly 9. Cantilever Outrigger - Moment Connection (BMC) 9. Cantilever Outrigger - Gravity Connection (BGC) Large Diameter Pipe Shoe with Universal Anchors Large Diameter Pipe Shoe with Universal Guides Small Diameter Pipe Shoe with Universal Anchors Small Diameter Pipe Shoe with Universal Guides

12 12Modular Pipe Rack ConX Module Assembly System Components Quick Lift Module TM (QLM TM ) Ground Assembly Stand Stacking Lifting Lug TM (SLLUG TM )

13 Modular Pipe Rack 13 ConX Modular Access System - Interer Module Make up Platform Inter Module Make up Platform Truss Modular Access Platform Cantilever Outrigger - Gravity Connection (BGC) Modular Walk Surface Modular Railing Modular Toe Kick Modular Ladder

14 14Modular Pipe Rack ConX Modular Access System - Modular Access Platform / Cable Tray Catwalk Cable Tray Catwalk Modular Access Platform Cantilever Outrigger - Gravity Connection (BGC) Cable Tray Support Outrigger Modular Railing Modular Toe Kick Modular Ladder

15 2. Assemble Rack without Upper Level Transverse Beams Modular Pipe Rack 15 Field Assembly Overview ConX structures are designed and detailed considering construction sequence. The use of 3D modeling provides exact grid locations, weights, center of gravity, and dimensional information which are all critical to the field in planning the erection phase of the project. Each piece is then manufactured, marked and shipped with respect to the erection sequence enabling maximum productivity. 6. Add Variable Height T Post for Sloped Lines if required 5. Deliver & Install Upper Level Pipes & Cable Tray 4. Install Upper Level Transverse Beams 3. Deliver & Install Lower Level Pipes 1. Footings completed in advance of Erection

16 16Modular Pipe Rack Assembly Sequence Stick Built

17 Modular Pipe Rack 17 Assembly Sequence Mod Yard Assembly

18 18Modular Pipe Rack Assembly Sequence Module on a Stick Base

19 Example ConXRTM Modular Pipe Rack 2 Level-Fixed Base (20 X 20 Grid) Modular Pipe Rack 19 *NOTE: For projects with loads that exceed the standard capacities defined below, please contact ConXtech directly at [email protected] for additional ConX solutions. PIPE RACK CABLE TRAYS 6 ESTIMATED LATERAL LOAD RANGE FOR THIS STANDARD RACK CONFIGURATION* 15 FIXED 20 MOMENT CONNECTION MOMENT CONNECTION HSS 8X8X5/8 20

20 20Modular Pipe Rack Example ConXRTM Modular Pipe Rack 3 Level-Fixed Base (20 X 20 Grid) *NOTE: For projects with loads that exceed the standard capacities defined below, please contact ConXtech directly at [email protected] for additional ConX solutions. PIPE RACK CABLE TRAYS ESTIMATED LATERAL LOAD RANGE FOR THIS STANDARD RACK CONFIGURATION* FIXED 20 MOMENT CONNECTION GRAVITY CONNECTION MOMENT CONNECTION HSS 8X8X5/8 20

21 Example ConXRTM Modular Pipe Rack 4 Level-Fixed Base (20 X 20 Grid) Modular Pipe Rack 21 *NOTE: For projects with loads that exceed the standard capacities defined below, please contact ConXtech directly at [email protected] for additional ConX solutions. PIPE RACK CABLE TRAYS ESTIMATED LATERAL LOAD RANGE FOR THIS STANDARD RACK CONFIGURATION* FIXED 20 GRAVITY CONNECTION MOMENT CONNECTION GRAVITY CONNECTION MOMENT CONNECTION HSS 8X8X5/8 20

22 II Z Y X V U T S R Q P O 1 N 2 L K J I H G F E D C 0 For Field Use 01/16/2012 REV DESCRIPTION DATE Clawiter Rd. Hayward, CA DESCRIPTION PROJECT NAME DRAWN BY DATE DRAWN B A JOB No. DRG No. 22Modular Pipe Rack Sample Plans O ZZ YY XX WW VV UU TT SS RR QQ PP OO NN MM LL KK JJ HH GG FF EE DD CC 14@20'-0=280'-0 BB AA W AREA 08 AREA 06 AREA 03 21@20'-0=420'-0 28'-0 471' M AREA 10 B ' '-0 20'-0 11@20'-0=220'-0 8@20'-0=160'-0 20'-0 AREA 07 15@20'-0=300'-0 AREA 04 20'-0 25@20'-0=500'-0 30'-0 20'-0 20'-0 7@20'-0=140'-0 AREA 05 10@20'-0=200'-0 20'-0 AREA 01 23'-5 9'-7 AREA 02 20'-0 SEE E4002 FOR MATCH LINE AREA 4 STEEL B-3 W12X30 B-6 W12X30 CFA1027 HSS8X8X5 8/ B-6 W12X30 B-6 W12X30 Area: 10 MARK QTY. NAME PROFILE AB2 192 ANCHOR ROD ROD1" AB3 48 ANCHOR ROD ROD1" B-1 15 BEAM-BMM W12X40 B-3 19 BEAM-BGG W12X30 B-4 37 BEAM-BMM W12X30 B-5 1 BEAM-BMG W12X30 B-6 6 BEAM-BME W12X30 B-7 4 BEAM-BMM W12X30 C-1 12 COLUMN-CG-20 HSS8X8X5/8 C-2 4 COLUMN-CM-20 HSS8X8X5/8 C-3 10 COLUMN-CM-24 HSS8X8X5/8 C-4 2 COLUMN-CMI-24 HSS8X8X5/8 CX01 87 OUTER COLLAR CONXR CX02 6 BW-B FL3/16"X7 3/4" LEAVOUT B-3 W12X30 B-6 W12X30 G CFA1009 B-3 W12X30 B-3 W12X30 CFA1010 CFA1008 NORTH CFA1012 CFA1010 CFA1011 B-3 W12X30 B-3 W12X30 B-3 W12X30 B-3 W12X30 B-3 W12X30 B-3 W12X30 B-3 W12X30 CFA1011 CFA1012 I CFA H B-3 W12X30 B-3 W12X30 B-3 W12X30 CFA1011 CFA1011 D CFA1016 B-3 W12X30 CFA1014 CFA1012 CFA1013 B-3 W12X30 B-3 W12X30 CFA1013 CFA1019 CFA1014 CFA1028 CFA1018 B-3 W12X30 B-5 W12X30 B-3 W12X30 CFA1027 CFA1028 CFA1017 CFA CFA1027 B-6 W12X30 BFA1001 W12X30 B-7 W12X30 BFA1004 W12X30 B-7 W12X30 CFA1015 B-1 W12X40 CFA1026 B-6 W12X F E 9 C B.5 11 ConXtech AREA 10 FILTRATION AREA 10 FILTRATION ISOMETRIC BELRIDGE WATER SOFTENING PLANT CMK 01/15/ E10000

23 Modular Pipe Rack 23 ConX Benefits at Every Stage of a Project Safety 1. Robust Structure Premium Pre-fabricated off site No field welding 2. Reduced Risk Fewer personnel required Lower & Locking TM connection Gravity stabilized without bolts No spud required to align 3. Standardized Construction Site Advantages Efficient, consistent work planning & flow Clean / uncluttered site 4. Easy to top load pipe 5. Standard repeatable work Simplified safety training Design 1. Robust & Brace Free Structure Allows ultimate pipe routing options Simplifies equipment placement Design flexibility - same frame for various loads Reduces dependency on information flow between trades 2. Components Accelerate Design Pre-designed, standardized connections Fewer variations in beam sizes More standardization of beams with same erection marks Modular, adjustable pipe guides and supports Modular equipment Modular platforms Modular scaffolding 3. Standardized Modularization 1. No added braces for transport loads 2. Built in stability without base connection 3. No diagonals to interfere with pipe or equipment 4. Precise dimensions 5. Top load pipe in partially complete structure 6. Expandable horizontally 7. Expandable vertically 8. Innovative ConX SLLUG TM A multi-function Stacking Lifting Lug The ConX Way for safe lifting, aligning, stacking and transporting industrial modules Life Cycle and Sustainability 1. Interchangeability of standard modular components extends life cycle 2. Easily expandable 3. Relocatable 4. Potential for disassembly, reconfiguration and re-use Lower & Locking TM bolted assemblies can be easily unbolted and disassembled for future use 5. Safe to disassemble Operational 1. No diagonals to interfere with maintenance access 2. No diagonals to interfere with equipment removal or replacement 3. No diagonals to interfere with piping modifications 4. Expandable horizontally 5. Expandable vertically 6. Safer work environment Fabrication 1. Shorter lead times 2. Robotics and specialized fixturing in ConX Factory easily scale to meet demanding schedules for multiple projects with minimal labor 3. Standardized work Higher throughput with existing facility Higher throughput with existing workforce Reduced layout and fit up Process oriented workflow Specialized jigs and fixturing delivers precision Reduces RFI s Reduces errors and re-work Simplifies entire fabrication process Scalable process

24 24Modular Pipe Rack Procurement 1. Fewer variables in member sizes and SKU s Volume purchasing power & cost control Availability Predictability in quality and sourcing Simplified inventory 2. Common components Mass-customization Production off-site ensures quality Interchangeability of parts Opportunity to stock common items 3. Early release 4. Shorter lead times 5. Robotics and specialized fixturing in ConX Factory easily scale to meet demanding schedules for multiple projects with minimal labor Logistics 1. Factory manufactured kit of parts Significantly simplifies logistics Reduces manpower required Reduces cost of onsite support for workforce Ensures quality and accurate fit up 2. Easier logistics and workflow Lowers total freight cost Reduces risk 3. Minimize or eliminate lay down Just in time delivery Minimal sorting required Erect directly from truck Detailing 1. Simple digital model creation Limited variables Standard detail libraries No braces simplifies integration of non-structural elements 2. Digital concept model rapidly evolves into final model Early dimensionally accurate BIM is a clash prevention tool Piping Process & Design 1. No diagonal braces Increases pipe rack capacity Greatly reduces pipe coordination Greatly reduces equipment coordination 2. Modular chassis Anatomically correct at concept Expandable horizontally Expandable vertically Qualifications 1. Extensively tested in full scale 2. Proven with 7+M sf deployed to date 3. Only connection tested 100% on both axes 4. Meets all special high seismic detailing requirements 1. Faster 2x to 5x faster 2. Safer Assembly Lower and Locking TM connection Simplified process driven erection Smaller workforce in field 3. Factory built kit-of-parts Interchangeable parts Factory fabricated full-length columns & beams No cut and fit on site Reduces plumbing and squaring No scoring or galvanizing for slip critical joints (U.S.) 4. Factory welded components Robotically welded standardized connections -- Ensures quality -- Eliminates field weld inspection 5. Simplified Bolting Reduced quantity of standardized bolts - prepackaged with DTI washers -- Ensures bolting materials are there and ready -- Accelerates bolt-up process -- Reduces handling and make-up of bolts -- Simplifies and accelerates QC by enabling visual field inspection -- Eliminates possibility of using wrong bolts 6. Intuitive Lower & Locking TM connections speeds assembly and ROI Allow for safer erection Fewer number of pieces to erect Reduces risk in schedule Eliminates errors and re-work 7. Standardized process-driven construction Simplified layout with omni-directional columns Efficient and consistent work planning Consistencies among multiple projects Faster site prep: simplified foundations Fewer manpower-related logistics System reduces learning curve 8. Install work platforms and catwalks as primary structure is erected

25

26 Covered by the following: U.S. P.N. 6,837,016; 7,051,917; 7,021,020; 7,621,099; Australia Pat. No ; Canada Pat. No. 2,458,706; China Pat. No. ZL ; Japan Pat. No s ; ; Mexico Pat. No. 262,499; EPat. No (DE, ES, FR, GB, IE, IT, NL, SE, TR); India Pat. No. 219,425. Other U.S. and Foreign Patent Protection Pending. Copyright 2010 ConXtech, Inc. All rights reserved. Phone: x 115 Fax: Covered by the following: U.S. P.N. 6,837,016; 7,051,917; 7,021,020; 7,621,099; Australia Pat. No ; Canada Pat. No. 2,458,706; China Pat. No. ZL ; Japan Pat. No s ; ; Mexico Pat. No. 262,499; EPat. No (DE, ES, FR, GB, IE, IT, NL, SE, TR); India Pat. No. 219,425. Other U.S. and Foreign Patent Protection Pending. Corporate Headquarters: 6701 Koll Center Parkway, Suite 150 l Pleasanton, CA Manufacturing Operations: Copyright Clawiter 2010 ConXtech, Rd Inc. Hayward, All rights reserved. CA Additional information is available on our website at Copyright ConXtech, Inc. All rights reserved. Structures, methodologies, concepts, descriptions thereof, trademarks, logos of ConXtech shown, illustrated and described in this document are covered by various forms of intellectual property protections considered by ConXtech to be of great value. These protections include, but are not limited to, copyrights, and the following U.S. and Foreign Patents which variously cover ConXtech s ConX structures and methodologies: US and Foreign Patents: U.S. P.N. 6,837,016; U.S. P.N. 7,021,020; U.S. P.N. 7,837,084; Australia P.N ; Canada P.N. 2,458,706; China P.N. ZL ; Japan P.N ; Mexico P.N. 262,499; U.S. P.N. 6,802,169 B2; U.S. P.N. 8,161,707; Australia P.N ; Brazil P.N. PIO ; Canada P.N ; China P.N. ZL ; Mexico P.N ; U.S. P.N. 7,051,917; Australia P.N ; Canada P.N. 2,564,195; China P.N. ZL ; Hong Kong P.N Japan; P.N ; Mexico P.N ; U.S. P.N. 7,127,863; U.S. P.N. 7,530,205; U.S. P.N. 7,146,770; U.S. P.N. 7,131,240; U.S. P.N. 7,503,151; U.S. P.N. 7,621,099; U.S. P.N. 7,716,820; U.S. P.N. 8,205,312; China P.N. ZL ; EPO P.N (FR); EPO P.N (DE); EPO P.N (IE); EPO P.N (IT); EPO P.N (NL); EPO P.N (ES); EPO P.N (SE); EPO P.N (GB); Turkey P.N. TR T4; India P.N. 219,425; U.S. P.N. 7,527,466; U.S. P.N. 7,040,069; U.S. P.N. 7,621,088; U.S. P.N. 7,441,692; Australia P.N ; Canada P.N. 2,578,959; China P.N. ZL ; Japan P.N. 4,482,586; Mexico P.N. 270,862; U.S. P.N. 7,051,918; U.S. P.N. 7,802,406; Canada P.N. 2,153,038; US P.N. 8,011,150; U.S. P.N. 7,837,084; U.S. P.N. 7,941,985; Australia P.N ; Canada P.N. 2,685,181. Other U.S. and Foreign Patent Protection Pending. Printed on Recycled Paper