Crane control unit KST 3
|
|
- Shanna Reynolds
- 7 years ago
- Views:
Transcription
1 Crane control unit KST 3 2/ The crane control unit KST 3 combines in its design the crane driver s seat and the control and monitoring devices. Ready wired, it can be easily and quickly installed in the crane cabin. Equipment es: Plastic polyester. The equipment es with the devices fitted have hinged tops that can be locked in position and armrests. They contain the termination and connection facilities and a lockable plug-in cover on the inside. Seat KFS 2: The seat backrest can be tipped forwards and further tipped together with the cushion. The cushion and seat backrest are padded. Adjusting possibilities: Cushion horizontally and vertically. Height adjustment via a gas-loaded spring in the seat base. Seat backrest horizontally and vertically to the cushion. Armrests padded and adjustable in height. Fixed to the equipment es. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pebble-grey. textured Varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 KST3KFS2- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Pos. Weight kg Price EURO 1 Crane control unit with driver s seat KFS 2 with base plate 36 KST ,- 2 Crane control unit with driver s seat KFS 2 without base plate 31 KST Crane control unit without driver s seat KFS 2 with base plate 21 KST ,- 4 Crane control unit without driver s seat KFS 2 without base plate 16 KST 33 65, Driver s seat see catalog 2/130 (picture shows) KFS Driver s seat see catalog 2/132 KFS Driver s seat see catalog 2/140 KFS 9 20 Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 7,- 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 5, Special painted 54,- 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters
2 Crane control unit KST 3 2/ Protection IP 54 Dimensions in (... ) for driver s seat KFS 4, 9 Direction of view Base plate for KFS 2 (according to 2/130) Cutting Base plate for KFS 4, 9 (according to 2/ ) Cutting without base plate Cutting 105 x 240 View X Version shown for left-hand installation (right-hand side installation is mirror image) 103
3 Crane control unit KST 4 swivelling 2/040 The swivelling crane control unit KST 4 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment es: Sheet steel. The equipment es with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through aduct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 6, with an oilhydraulic vibration absorption system, weight adjustment and air-permeab le artificial leather or textil material, with headrest. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension, right equipment turnable. Cross-member: Steel selection, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. KST41KFS92- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 Pos. Weight kg Price EURO 1 Crane control unit standard design Equipment es 160 x 420 mm 2 Crane control unit standard design Equipment es 200 x 420 mm Crane control unit standard design Equipment es special dimensions 5 60 KST 41 KST 42 KST 4x 3773,- 36,- Inquiry 6 additional variations for driver s seat KFS 6 see catalog 2/134 7 Driver s seat KFS 9 see catalog 2/140 KFS 6 KFS Footrest mounted onto swivel base adjustable ± 30 mm , Plate for horizontal manual adjustment of control unit adjustable ± 250 mm Heating 2 x 2 kw with ventilator 230 V 50 Hz airvolume ca. 300 m 3 /h mounted on the swivel base sidewise 196, Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 7,- 5,- 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54,- 104
4 Crane control unit KST 4 swivelling 2/041 Protection IP 54 weight loaded Dimension Dimension Dimension A B C KST <625 >700 KST <655 >730 Direction of view Horizontal adjustment of equipment es Horizontal adjustment seat with equipment es C left Seat right Inclination adjustment of equipment es Floor mounting View X Cable inlet ø
5 Crane control unit KST 5 swivelling 2/050 The swivelling crane control unit KST 5 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment es: Sheet steel. The top panel of the equipment es with the devices can be raised and locked in position. The terminal strip is easily accessible via an opening on the inside that can be closed with a lockable cover. Seat: Comfortable spring mounted seat KFS 6, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material, with headrest, with armrests. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. KST51KFS92- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 Pos. Weight kg Price EURO 1 Crane control unit standard design Equipment es 200 x 50 mm 2 Crane control unit standard design Equipment es 270 x 50 mm 3 4 Crane control unit standard design Equipment es 320 x 50 mm 5 Crane control unit standard design Equipment es special dimensions 4 92 KST 51 KST 52 KST 54 KST 5x 3902,- 4020,- 413,- Inquiry 6 additional variations for driver s seat KFS 6 see catalog 2/134 7 Driver s seat KFS 9 see catalog 2/140 Driver s seat KFS 10 see catalog 2/142 KFS 6 KFS 9 KFS 10 9 Monitor mounting support left or right T Footrest mounted onto swivel base adjustable ± 30 mm ,- 294,- 12 Manual adjustment of equipment es horizontal adjustable ± 75 mm 13 Plate for horizontal manual adjustment of control unit adjustable ± 250 mm 14 Manual adjustment of control unit vertical (gas loaded spring) adjustable 0 mm Motorized adjustment of control unit swivelling (drive 24 V DC seat height + 30 mm) 19 Heating 2 x 2 kw with ventilator 230 V 50 Hz airvolume ca. 300 m 3 /h mounted on the swivel base sidewise ,- 196,- 193, Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 7,- 5,- 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54,- 106
6 Crane control unit KST 5 swivelling 2/051 Protection IP 54 weight loaded Dimension Dimension Dimension A B C KST KST KST Horizontal adjustment of control unit Direction of view Horizontal adjustment of seat C manual adjustment of foot rest left Seat right Floor mounting 1200 (traverse path 500) View X Cable inlet ø
7 Crane control unit KST 6 swivelling 2/060 The swivelling crane control unit KST 6 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment es: plastic PU foam The equipment es with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through aduct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 6, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material, with headrest, with armrests. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. KST6KFS92- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 Pos. Weight kg Price EURO 1 Crane control unit standard design 2 Crane control unit standard design not swivelled 3 Crane control unit standard design without swivel base and cross-member KST 6 KST 61 KST ,- 3097, additional variations for driver s seat KFS 6 see catalog 2/134 7 Driver s seat KFS 9 see catalog 2/140 KFS 6 KFS Footrest mounted onto swivel base adjustable ± 30 mm , Plate for horizontal manual adjustment of control unit adjustable ± 250 mm Heating 2 x 2 kw with ventilator 230 V 50 Hz airvolume ca. 300 m 3 /h mounted on the swivel base sidewise , Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 7,- 5,- 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54,- 10
8 Crane control unit KST 6 swivelling 2/061 Protection IP 54 weight loaded Direction of view Horizontal adjustment of equipment es Horizontal adjustment of seat with equipment es left Seat right Rotation radius,c - minimal adjustment = 520 mm Rotation radius,c - maximal adjustment = 620 mm Inclination adjustment of equipment es Floor mounting View X Cable inlet ø
9 Crane control unit KST 7 2/ The crane control unit KST 7 combines in its design the crane driver s seat and the control and monitoring devices. Ready wired, it can be easily and quickly installed in the crane cabin. Equipment es: Sheet steel. The equipment es with the devices fitted have hinged tops that can be locked in position and armrests. They contain the termination and connection facilities and a lockable plug-in cover on the inside. Seat KFS 2: The seat backrest can be tipped forwards and further tipped together with the cushion. The cushion and seat backrest are padded. Adjusting possibilities: Cushion horizontally and vertically. Height adjustment via a gas-loaded spring in the seat base. Seat backrest horizontally and vertically to the cushion. Armrests padded and adjustable in height. Fixed to the equipment es. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pebble-grey. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 KST72KFS4- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Pos. Weight kg Price EURO 1 Crane control unit with driver s seat KFS 2 with base plate 51 KST 7 200,- 2 Crane control unit with driver s seat KFS 2 without base plate 46 KST ,- 3 Crane control unit without driver s seat KFS 2 with base plate 36 KST ,- 4 Crane control unit without driver s seat KFS 2 without base plate 31 KST Driver s seat see catalog 2/130 KFS Driver s seat see catalog 2/132 (picture shows) KFS Driver s seat see catalog 2/140 KFS 9 20 Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 7,- 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 x 5 metre long 33 Additional or subtract price each metre 5, Special painted 54,- 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 caracters
10 Crane control unit KST 7 2/ Protection IP 54 Dimensions in (... ) for driver s seat KFS 4, 9 Direction of view Base plate for KFS 2 (according to 2/130) Cutting Base plate for KFS 4, 9 (according to 2/ ) Cutting without base plate Cutting View X Version shown for left-hand installation (right-hand side installation is mirror image) 111
11 Crane control unit KST 75 2/ The crane control unit KST 75 combines in its design the crane driver s seat and the control and monitoring devices. Ready wired, it can be easily and quickly installed in the crane cabin. Equipment es: Sheet steel. The equipment es with the devices fitted have hinged tops that can be locked in position and armrests. They contain the termination and connection facilities and a lockable plug-in cover on the inside. Seat KFS 2: The seat backrest can be tipped forwards and further tipped together with the cushion. The cushion and seat backrest are padded. Adjusting possibilities: Cushion horizontally and vertically. Height adjustment via a gas-loaded spring in the seat base. Seat backrest horizontally and vertically to the cushion. Armrests padded and adjustable in height. Fixed to the equipment es. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pebble-grey. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 KST75KFS2- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Pos. Weight kg Price EURO 1 Crane control unit with driver s seat KFS 2 with base plate 51 KST ,- 2 Crane control unit with driver s seat KFS 2 without base plate 46 KST ,- 3 Crane control unit without driver s seat KFS 2 with base plate 36 KST Crane control unit without driver s seat KFS 2 without base plate 31 KST , Driver s seat see catalog 2/130 (picture shows) KFS Driver s seat see catalog 2/132 KFS Driver s seat see catalog 2/140 KFS 9 20 Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 7,- 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 x 5 metre long 33 Additional or subtract price each metre 5, Special painted 54,- 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters
12 Crane control unit KST 75 2/ (1030) (610) Protection IP 54 KFS 2 10 X Dimensions in (... ) for driver s seat KFS 4, (1030) 50 (25) Direction of view 0 Ø 1 Base plate for KFS 2 (according to 2/130) Cutting Ø 1 Base plate for KFS 4, 9 (according to 2/ ) Cutting without base plate Ø View X Cutting 155 x Version shown for left-hand installation (right-hand side installation is mirror image) 113
13 Crane control unit KST swivelling 2/00 The swivelling crane control unit KST is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment es: plastic PU foam The equipment es with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through aduct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 6, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Right equipment turnable. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. KSTKFS62- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/025 Pos. Weight kg Price EURO 1 Crane control unit standard design 2 Crane control unit standard design not swivelled 3 Crane control unit standard design without swivel base and cross-member KST KST 1 KST ,- 3097, additional variations for driver s seat KFS 6 see catalog 2/134 7 Driver s seat KFS 9 see catalog 2/140 KFS 6 KFS Footrest mounted onto swivel base adjustable ± 30 mm , Plate for horizontal manual adjustment of control unit adjustable ± 250 mm Heating 2 x 2 kw with ventilator 230 V 50 Hz airvolume ca. 300 m 3 /h mounted on the swivel base sidewise , Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/360 7,- 5,- 54,- 30 Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54,- 114
14 Crane control unit KST swivelling 2/01 Protection IP 54 weight loaded Direction of view Horizontal adjustment of equipment es Horizontal adjustment of seat with equipment es left Seat right Inclination adjustment of equipment es Floor mounting view X Cable inlet ø
15 Crane control unit KST 5 2/02 The crane control unit KST 5 is ergonomically designed and provides a high degree of comfort. The standard design includes following. Equipment es: plastic PU foam The equipment es with the devices can be vertically and horizontally adjusted together with the armrest. Cabling is run through aduct on the terminal block. (The terminal block housing is mounting behind the seat) Seat: Comfortable static mounted seat KFS, covered with air-permeable artificial leather or with textil material and with roller-bearing swivel system, with headrest. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Seat with the equipment es swivelled 90 one sided. Endpoints to look. Right equipment turnable. Console: Heating 2 steps 2 x 2 kw 30 V AC Ventilator 30 V AC air volume ca 1000 m 3 /h air circulation (opening in the rear side of the console) fresh air circulation (opening in the underside of the console). Selector switch for heating/ventilator are in the. The seat can be tilted forward to reach the terminal block of the heating / ventilator. KST5KFS- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/025 Pos. Weight kg Price EURO 1 Crane control unit standard design with heating/ventilator 2 3 Crane control unit standard design without heating/ventilator KST 5 KST 7 335, additional variations for driver s seat KFS see catalog 2/13 7 KFS 9 10 Footrest mounted onto console adjustable ± 30 mm , Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 7,- 5,- 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54, 116
16 Crane control unit KST 5 2/03 Protection IP 54 KFS 590 ± ± ± 25 Horizontal adjustment of seat with equipment es Direction of view Swivelled onesided endpoints to lock. Horizontal adjustment of equipment es left Seat right Inclination adjustment of equipment es View X Direction of view Middlepoint Seat Fresh air opening 50 ± 25 Floor mounting 117
17 Crane control unit KST 9 swivelling 2/090 The swivelling crane control unit KST 9 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment es: plastic PU foam The equipment es with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through aduct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 6, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material, with headrest. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Right equipment turnable. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. KST9KFS92- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/026/027 Pos. Weight kg Price EURO 1 Crane control unit standard design KST ,- 6 additional variations for driver s seat KFS 6 see catalog 2/134 7 Driver s seat KFS 9 see catalog 2/140 Driver s seat KFS 10 see catalog 2/142 KFS 6 KFS 9 KFS 10 9 Monitor mounting support left or right T Footrest mounted onto swivel base adjustable ± 30 mm ,- 294, Plate for horizontal manual adjustment of control unit adjustable ± 250 mm 14 Manual adjustment of control unit vertical (gas loaded spring) adjustable 0 mm Motorized adjustment of control unit swivelling (drive 24 V DC, seat height + 30 mm) ,- 196,- 193,- 20 Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm2 without wiring each terminal 31 Terminal block 4 mm2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 7,- 5,- 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54,- 11
18 Crane control unit KST 9 swivelling 2/091 Protection IP 54 weight loaded duct on both sides Direction of view Horizontal adjustment of seat with equipment es left Seat right Floor mounting view X Cable inlet ø
19 Crane control unit KST 10 swivelling 2/100 The swivelling crane control unit KST 10 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment es: plastic PU foam The equipment es with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through a duct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 6, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material, with headrest. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. KST10KFS6- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/02 Pos. 1 Crane control unit standard design 2 Crane control unit standard design not swivelled 3 Crane control unit standard design without swivel base and cross-member additional variations for driver s seat KFS 6 see catalog 2/ Footrest mounted onto swivel base adjustable ± 30 mm Plate for horizontal manual adjustment of control unit adjustable ± 250 mm Heating 2 x 2 kw with ventilator 230 V 50 Hz airvolume ca. 300 m 3 /h mounted on the swivel base sidewise 20 Multi-axis controller V11, V 14, V 25, V 5 see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters Weight kg KST 10 KST 101 KST 102 KFS 6 Price EURO 3620,- 3097, ,- 196,- 10 7,- 5,- 54,- 120
20 Crane control unit KST 10 swivelling 2/101 KFS 6 X 1020 ± ± 30 weight loaded Horizontal adjustment of equipment es Direction of view Horizontal adjustment of seat with equipment es left Seat right 70º fold-away View X Cable inlet ø 100 Floor mounting 121
21 Crane control unit KST 15 swivelling 2/102 manual and/or motorized adjustment 2011 The swivelling crane control unit KST 15 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment es: Sheet steel. The top panel of the equipment with the devices can be raised and locked in position. The terminal strip is easily accessible via an opening on the inside that can be closed with a lockable cover. The external wiring is run through aduct from the equipment es in the cross-member. Seat: Comfortable spring mounted seat KFS 10, with a pneumatic vibration absorption system by compressor 24 V DC, weight adjustment and airpermeable artificial leather or textil material, with headrest, with armrests. Manual adjustments: Seat horizontally and vertically. lnclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Motorized adjustments: Seat with equipment es vertical (inclinations adjustments forward/backward). Seat with equipment es horizontal. Selector switches for motorized-drives are in the equipment. Motor 24 V DC ca. 15 ampere. KST15XKFS92- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Cross-member: Steel section, top of which can be raised to lay cabling. The seat with the es can be tilted forwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 Pos. Weight kg Price EURO 1 Crane control unit standard design Equipment es 200 x 50 mm 2 Crane control unit standard design Equipment es 270 x 50 mm 3 4 Crane control unit standard design Equipment es 320 x 50 mm 5 Crane control unit standard design Equipment es special dimensions KST 151 KST 152 KST 154 KST 15x 951,- 906,- 915,- Inquiry 6 additional variations for driver s seat KFS 10 see catalog 2/142 7 Driver s seat KFS 6 see catalog 2/134 Driver s seat KFS 9 see catalog 2/140 KFS 10 KFS 6 KFS 9 9 Monitor mounting support left or right 10 Footrest (required) mounted onto swivel base adjustable ± 15 mm ,- 294, Plate for horizontal manual adjustment of control unit adjustable ± 250 mm Motorized adjustment of equipment es vertical adjustable ± 25 mm 24 V DC 16 Motorized adjustment of equipment es horizontal adjustable ± 40 mm 24 V DC 17 1 Motorized adjustment of control unit swivelling (drive 24 V DC, seat height + 70 mm) 19 Heating 2 x 2 kw with ventilator 230 V 50 Hz airvolume ca. 300 m 3 /h mounted on the swivel base sidewise ,- 2644,- 2644,- 193, Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 7,- 5,- 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54,- 122
22 Crane control unit KST 15 swivelling 2/103 manual and/or motorized adjustment 2011 A B 600 A Protection IP 54 KFS 10 X 70 ± ± ± 50 weight loaded 00 90º stepless 75º Motorized horizontal adjustment of seat with equipment es Dimension Dimension Dimension A B C KST KST KST Manual horizontal adjustment of seat Motorized horizontal adjustment of equipment es Direction of view View X Manual vertical adjustment of seat left right Motorized vertical adjustment of seat with equipment es (inclinations adjustments forward/ backward) Motorized vertical adjustment of equipment es Manual vertical adjustment of footrest Seat Cable inlet ø ø Horizontal adjustment only seat cushion Floor mounting 123
23 Crane control unit KST 1 swivelling 2/10 manual and/or motorized adjustment 2011 The swivelling crane control unit KST 1 is ergonomically designed and provides a high grade of comfort. The standard design includes following: Equipment es: Sheet steel. The top panel of the equipment with the devices can be raised and locked in position and is provided with armrests. Cabling is run through aduct from the equipment es in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 9, with an oilhydraulic vibration absorption system, weight adjustment and airpermeable artificial leather or textil material, with headrest. Manual adjustments: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Equipment es horizontally and vertically. Motorized adjustments: Seat with equipment es vertical (inclinations adjustments forward/backward). Seat with equipment es horizontal. Selector switches for motorized-drives are in the equipment. Motor 24 V DC ca. 15 ampere. Cross-member: Steel section, top of which can be raised to lay cabling. The seat with the es can be tilted forwards so that the cable duct in the cross-member is accessible. KST11KFS92- Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +0 C Climate resistance Damp heat constant IEC Damp heat cyclic IEC Degree of protection IP 54 IEC/EN Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 10 right, 90 left, stopped by friction brake. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey. textured varnish All non-painted metal parts are electrogalvanized and chromed. Description data see catalog 5/023/024 Pos. Weight kg Price EURO 1 Crane control unit standard design Equipment es 160 x 420 mm 2 Crane control unit standard design Equipment es 200 x 420 mm Crane control unit standard design Equipment es special dimensions KST 11 KST 12 KST 1x 752,- 7641,- Inquiry 6 additional variations for driver s seat KFS 6 see catalog 2/134 7 Driver s seat KFS 9 see catalog 2/140 KFS 6 KFS Footrest (required) mounted onto swivel base adjustable ± 15 mm , Plate for horizontal manual adjustment of control unit adjustable ± 250 mm Motorized adjustment of control unit swivelling (drive 24 V DC, seat height + 30 mm) 19 Heating 2 x 2 kw with ventilator 230 V 50 Hz airvolume ca. 300 m 3 /h mounted on the swivel base sidewise ,- 193, Multi-axis controller see catalog 1/ Single-axis controller see catalog 1/10 22 Double-handle controller see catalog 1/ Control-switch see catalog 1/ Command and indicating devices see catalog 1/ Terminal block 4 mm 2 without wiring each terminal 31 Terminal block 4 mm 2 with wiring wire 1 mm 2 each terminal 32 External wiring single wire highly flexible 1,5 mm 2 5 metre long 33 Additional or subtract price each metre 7,- 5,- 40 Special painted 41 Indicating labels not engraved with 2 or 4 arrows 42 Engraving, each 10 characters 54,- 124
24 Crane control unit KST 1 swivelling 2/109 manual and/or motorized adjustment 2011 Protection IP 54 weight loaded 00 Motorized horizontal adjustment of seat with equipment es Manual horizontal adjustment of equipment es Dimension Dimension Dimension A B C KST <625 >15 KST <655 >35 Direction of view Manual horizontal adjustment of seat with equipment es Seat Motorized vertical adjustment of seat with equipment es (inclination adjustments forward/ backward) Manual vertical adjustment of seat with equipment es Manual inclination adjustment of seat with equipment es Manual vertical adjustment of footrest left Floor mounting right Cable inlet ø 100 View X 125
Workspace and storage furnishings
LISTA Compact Workspace and storage furnishings Test and inspection workstations With its modular test and inspection workstations, LISTA offers optimised solutions for modern quality assurance practices.
More informationKnürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationSERVER ROOM CABINET INSTALLATION CONCEPTS
SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS ZPAS 169 EXAMPLES OF SERVER ROOMS PROJECTS WITH ZPAS CABINETS Data Box in the
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationThe Ultimate in Boating Pedestals Seating and Table Systems. Stainless steel Range. www.marinetechindustries.com.au
The Ultimate in Boating Pedestals Seating and Table Systems Stainless steel Range STABILITY, DURABILITY, STYLE & COMFORT A proudly Australian owned business, Marine Tech Industries Australia Pty Ltd designs,
More informationLinear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationDam-P 868 designed by DebiLab. 0,30 m 3 13,5 kg 12,5 kg 180 cm. Dimensions (cm) Materials, properties and details
Dam-P 868 designed by DebiLab 0,30 m 3 13,5 kg 12,5 kg 180 cm Armchair with 4-legs metal frame, seat End : armchair for home and contract suitable to furnish: home, boardroom, break-out area, waiting room,
More informationContact person Date Reference Page Bengt-Åke Andersson 2013-11-27 3F020623A Rev1 1 (4) Wood Technology +46 10 516 54 34 bengt-ake.andersson@sp.
issued by an Accredited Testing Laboratory Contact person Bengt-Åke Andersson 2013-11-27 3F020623A Rev1 1 (4) Wood Technology +46 10 516 54 34 bengt-ake.andersson@sp.se 1002 ISO/IEC 17025 Nordic Comfort
More informationSeries 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
More informationInvacare REA Dahlia 45 Transit Dealer Max User Weight 135Kg (21 stone)
Invacare Ltd Manual Prescription Form Pencoed Technology Park Dealer Prescription Form Pencoed CF35 5AQ LPF1U2READAHLIA140515Dealer Tel: +44 (0) 1656 776222 Fax: +44 (0) 1656 776220 July 2015 email: ordersuk@invacare.com
More informationKS-70. Catheterization Table GENERAL
PD505-009A Catheterization Table KS-70 GENERAL This Catheterization Table KS-70, which is combined with X-ray high voltage generator, X-ray tube assembly, X-ray image system (Image Intensifier, Flat Panel
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationClimasys Thermal Management System. Schneider Electric Universal Enclosures 2009
Climasys Thermal Management System Schneider Electric Universal Enclosures 2009 Schneider Electric Universal Enclosures The specialist in sealed equipment What is the mission of Schneider Electric Universal
More information06 / 2003. Optional components. MAXDATA PLATINUM Server-Rack PLATINUM. [Product Guide] www.maxdata.de
D Positioning Key-Features Specifications Optional components MAXDATA PLATINUM Server-Rack PLATINUM [Product Guide] www.maxdata.de Positioning Description Server-Racks with 41U, 37U and 23U Highlights
More informationCurrent valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
More informationRapide Inline Ceiling Extractor Fan, White Fascia 41800040590. Rapide Inline Ceiling Extractor Fan, Chrome Fascia 41800040580
Any Queries Call : 08000 23 23 23 Rapide Inline Ceiling Extractor Fan, White Fascia 41800040590 Rapide Inline Ceiling Extractor Fan, White Fascia Illuminated 41800040670 Rapide Inline Ceiling Extractor
More informationDiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
More informationLED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature
LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using
More informationAnatomy of a Manual Wheelchair
Anatomy of a Manual Wheelchair D. Michael McKeough, PT, EdD Associate Professor Division of Physical Therapy 1 Abstract This presentation illustrates the components of a manual wheelchair. Note pages contain
More informationNARROW AISLE FLEXI. The next generation in space saving efficiency
G4 The next generation in space saving efficiency G4 Europe s most popular articulated truck - now with industry leading features for enhanced and improved productivity. The Flexi G4 electric powered articulated
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationRPV - RP - RA air handling units
APPLICATIONS Heating, ventilation, cooling >> FACTORIES >> WAREHOUSES >> HALLS >> DISTRIBUTION CENTRES >> COMMERCIAL PREMISES >> PLACES OF WORSHIP RPV - RP - RA air handling units www.reznor.eu RPV - RP
More informationBasic price 2.250,- Excl. VAT
Date Invoice address Invoice address = delivery address Customer code C- Contact person Reference Other delivery address Quote Seat width D64035 35 cm D64040 40 cm D64045 45 cm D64050 50 cm Basic price
More informationSERVICE MANUAL. Corpus 3G. Seat system for electric wheelchair
SERVICE MANUAL US Corpus 3G Seat system for electric wheelchair How to contact Permobil Head Office of the Permobil group Produced and published by Permobil AB, Sweden Version 4, 2014-07 Item No.: 205260-US-0
More information3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationThe space saving solution.
10 KICKSPACE KICKSPACE. Over 70% of people think that they would benefit from additional kitchen space (ICM Research 2012) Kitchen kindly supplied by Second Nature kitchens - www.sncollection.co.uk The
More informationPlug-in relays Mini ISO relays
Powertrain Systems Chassis Systems Safety Security Body Driver Information Convenience Description Features Limiting continuous current 70 A Dimensional characteristics and the functional allocation of
More informationKnob Potentiometer with Switch
Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
More informationColocation Rack Secure, Separate Server Hosting and Housing in Data Centers
Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers An intelligent physical infrastructure is required
More informationAND DESIGN FROM CONCEPT. Why did we develop Xenon? Experienced team. Christopher Schmidt
Designed by Engineered by & Christopher Schmidt FROM CONCEPT Why did we develop Xenon?...during the entire product development process, we had at our disposal the most up-to-date prototyping and production
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationBLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
More informationH45 LED - Direct and indirect pendant
RAL 01 10 00 IP 20 230V 50/60Hz Specifications Direct and indirect light pendant linear luminaire. Aluminium profile. Diffusers in frosted polycarbonate profile. Driver included. Supplied with clear base,
More informationPLASTIC CONTAINERS CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS
CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS INDUSTRIAL CONTAINERS 64 CONTAINER HOLDING TROLLEYS for the coloured containers always
More informationRECLINER COLLECTIONS MAY
RECLINER COLLECTIONS MAY 2014 EURO LINE MONTEREY LEATHER: Top Grain & Leather Match BASE WOOD: High pressure laminated, Birch surface and Luan MECHANISM: Glide system with position lock; 360 swivel Kona
More informationLG Air conditioning Company Multi V Water Ⅱ. Air Conditioning Academy
LG Air conditioning Company Multi V Water Ⅱ Air Conditioning Academy 1.1 What is Multi V Water II? High Performance Prospect rights Water pipe Refrigerant pipe Indoor unit Beautiful Exterior Convenience
More information8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationINTRODUCTION. at the REHABILITATION sector shows. Physiotherapy practices. experience, warrants excellent service, performance and reliability.
REHABILITATION R INTRODUCTION This newly released catalogue aimed at the REHABILITATION sector shows our wide range of Mechanotherapy and Hydrotherapy products designed to meet the requirements of the
More informationThink of the environment before printing! Fax only contains page 1!
Netti 4U comfort compact easy to use design Date Invoice address Invoice address = delivery address Customer code C- Contact person Reference Other delivery address Offer Order Basic price: 2.750,- Excl.
More informationBelt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
More informationPlug and Socket Devices CES 63 A Series 8579
www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated
More informationBINGO Evolution. BINGO Evolution by HOGGI. BINGO was good - we just made it better. Made in Germany
de www.. Made in Germany BINGO Evolution by HOGGI BINGO Evolution BINGO was good - we just made it better Innovative folding mechanism & ASS Adaptive Suspension System Partnering together to mobilise kids
More informationType: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
More informationDetection of Pipe Leaks Connection of Pulse Monitoring System in Thermal Utilities
ZPU MIĘDZYRZECZ PREINSULATED PIPE Detection of Pipe Leaks in Thermal Utilities Assembly Manual Principles of Assembly and Servicing ZAKŁAD PRODUKCYJNO USŁUGOWY Międzyrzecz Polskie Rury Preizolowane Sp.
More informationMorgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
More informationElectro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationKnob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x 0.75 10.2 9.
Knob Potentiometer P6, PA6 FEATURES Test according to CECC 4000 or IEC 60393- P6 - Version for professional and industrial applications (cermet) W at 40 C PA6 - Version for professional audio applications
More informationPreset Counter signo 721
Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage
More informationAtigra T2 Seat System Notes for the Therapist
The Atigra comes with the T2 seat system. The T2 seat system has many advantages for the therapist who is looking for a seat and backrest system that will provide good postural support and a high level
More informationPlug and Socket Devices SolConeX 16 A Series 8570
www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control and signalling purposes > arge switching handle
More informationElectronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
More informationDéfumair XR. ventilation and cmv. fire grade - label CE. smoke-extraction fan extraction casing for kitchen at F400-120. advantages.
Défumair XR smoke-extraction fan extraction casing for kitchen at F400-120 Personalisation : - Phonic insulation version by insulated double-skin panels through 25 mm glass wool, class M1. advantages Originally
More informationGuide to enclosures for potentially explosive atmospheres
Guide to enclosures for potentially explosive atmospheres Guide to enclosures for potentially explosive atmospheres The safety of every application, in every environment, thanks to ATEX-certified steel,
More informationIndustrial infrared heater IR For premises with large volumes and high ceilings
3 3000 6000 W Electrical heat 3 models Industrial infrared heater For premises with large volumes and high ceilings Application is suitabe for total or supplementary heating of premises with large volume
More informationDIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
More informationProduct Data Sheets. Belt Conveyor System
Product Data Sheets Belt Conveyor System Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Texam Limited s range of powered belt conveyors is designed
More information4.3-inch Back-Up Camera
TM 4.-inch Back-Up Camera Model No.: PKC0BU4 Owner s Manual and Warranty Information Read these instructions completely before using this product. Retain this Owner s Manual for future reference. INTRODUCTION
More information(68.52) X. June 2000 Supercedes February 2000. xenex CONVENTIONAL FIRE DETECTION & ALARM SYSTEM. we look @ business differently
(68.52) X June 2000 Supercedes February 2000 xenex CONVENTIONAL FIRE DETECTION & ALARM SYSTEM.... we look @ business differently XENEX SYSTEM ARCHITECTURE Note: This schematic is for guidance only please
More information42U/45U 28" Wide Rack Installation & Service Guide
42U/45U 28" Wide Rack Installation & Service Guide 96-00171-005 Rev B Important Information Information in this document is subject to change without notice and does not represent a commitment on the part
More informationType: DILM32 10(24V50HZ) Article No.: 277247
Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
More informationUDSA - UDSBD unit heater
APPLICATIONS Heating >> FACTORIES >> WAREHOUSES >> HALLS >> SHOWROOMS >> GREENHOUSES >> RETAIL >>... UDSA - UDSBD unit heater www.reznor.eu V3 gas fired unit heater Reznor V3 unit heaters are one of the
More informationSWIMMING POOL AIR-HANDLING UNITS KU-DB Series
SWIMMING POOL AIR-HANDLING UNITS KU-DB Series ME20 proklima 2 SWIMMING POOL AIR-HANDLING UNITS - KU-DB Series proklima 3 TABLE OF CONTENTS 1 Introduction page 3 2 Features page 4 SWIMMING POOL AREA t =
More informationINTEGO.TRANSCENDENTAL
SIRONAUSA.COM INTEGO.TRANSCENDENTAL TREATMENT CENTER RISE ABOVE THE ORDINARY WITH INTEGO Based on Sirona s heritage of combining innovative technology and award-winning design, INTEGO is an entirely new
More informationIT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More information32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw
,1'8675,$/#*(16(7 6HULHV#'9#448 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw Generator set consisting of engine and alternator mounted
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationSECTION 10680 MediaStation Model 125 Electric Lateral Files (ELF)
SECTION 10680 MediaStation Model 125 Electric Lateral Files (ELF) PART 1-GENERAL 1.01 RELATED WORK SPECIFIED IN OTHER SECTIONS A. Electrical connections see electrical specifications. 1.02 SUBMITTALS A.
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationElectronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationMedia Storage and Transportation
Media Storage and Transportation Media Cases NER offers a variety of media cases for movement of media both within the tape library and to offsite locations. DCT Cases Durable blow-molded outer shell High-density,
More informationType: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
More informationCORNER FRIDGE REFRIGERATION UNIT INSTALLATION AND OPERATION INSTRUCTIONS
CORNER FRIDGE REFRIGERATION UNIT INSTALLATION AND OPERATION INSTRUCTIONS D E F Y I N G C O N V E N T I O N Congratulations on your new Corner Fridge Your new corner fridge may have different functions
More informationUB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS
UB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS: Carefully read these instructions before installing your new air-conditioner. AUSTRALIAN AUTOMOTIVE AIR AL00500054E 1 Table
More informationSede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com SAMPLE N 190197
33048 S. Giovanni al at. UD Report consists of 9 test reports. VIA CA' LEOCIO, 2 Defects before testing: one Sample name: PORTA VEEZIA BAR STOOL SAMPLE 190197 Overall dimensions: 450 x 560 x 1080 (h) mm
More informationRisk Analysis report (NS-EN ISO 14971)
Analysis conclusion After finished analysis, HEPRO AS concludes the following for the analysed product: By use in accordance with the Users Instructions or by probable user wrong-doings, it is not defined
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More information307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
More informationEmergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN 60204-1, VDE 0113 Part 1
MainswitchSurfacemounting Partno. P3-63/I4/SVB Articleno. 207343 CatalogNo. SP3-063-I4CRQ IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual
More informationTHE ADVANTAGES ARE YOURS
THE ADVANTAGES ARE YOURS The new switches/discrepancy switches "R0-DR0" have special characteristics that make them very different from the normal switches on the market. Listed below are some of the many
More informationDRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4
DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,
More informationVoltage Regulator SPAU 341 C. Product Guide
Issued: July 1998 Status: Updated Version: D/25.04.2006 Data subject to change without notice Features Comprehensive voltage regulation for power transformers with on-load tapchangers in distribution substations
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More informationTerminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
More informationSurface Technology. Centrifugal Fan GMD
Centrifugal Fan ATEX classed adapted for paint shops Wide assortment broad area of application Service friendly low maintenance costs Headquarters: Centrifugal Fan Centrifugal Fan is a direct driven industrial
More informationHeating oven with mechanical convection
FD series 53 Drying ovens / Heating ovens Heating oven with mechanical convection A BINDER FD series heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous
More informationLaserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
More informationMEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
More informationProduct and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
More informationLiebert Hiross HPW The High Performance Wallmount Cooling Solutions for Telecom Mobile Remote Access Nodes
Precision Cooling for Business-Critical Continuity Liebert Hiross HPW The High Performance Wallmount Cooling Solutions for Telecom Mobile Remote Access Nodes We re Emerson Network Power, backed by Emerson,
More informationStainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
More information