NitroStruts VARIABLE FORCE RANGE. VARIABLE FORCE RANGE 2500 to 50N. Variable Force Range ADVANTAGES. Suitable Applications
|
|
- Scot Byrd
- 7 years ago
- Views:
Transcription
1 0 to 50N Variable Force Range he variable force gas strut range is versatile and adaptable, if you have a variety of applications, one type of gas strut can be used by simple adjustment. hey can be used for one-off applications with no need to calculate the force required for the strut. When replacing existing struts and the force is unknown the variable gas strut is ideal. Plus the large range of end fittings available helps to match the existing strut. See pages 14 to 18. hes variable force range of gas struts are supplied charged to the maximum pressure as standard and can be reduced in situ or supplied to a pre-set pressure. he bleed valve is located at the end of the cylinder and is accessible to adjust the pressure when the strut is in situ, this allows quick and simple installation and adjustment of the strut. For further information and instructions on adjusting the pressure see page 32. Range Specification Black epoxy powder coated cylinder. Black nitrocarburized piston rod. Both rod and cylinder ends threaded, various end fittings available. Working temperature range 30ºc to +80ºc Protection tube and locking tubes available. See page 19. IMPORAN NOE Gas strut pressure can only be reduced to necessary force ADVANAGES.Versatile and adaptable..no need to calculate forces..ideal as a replacement unit..easy to use - just fit and adjust..useful for prototypes and one-offs..adjust to your complete satisfaction. Suitable Applications he Fixed Force range of struts is suitable for most applications, examples of these and uses can be found on page 2. New Applications & Made to Order If you need a gas strut for a new application and you are unsure of the exact force required we recoend the following. When you only need a small number of gas struts, use a variable force strut which you can adjust to suit. If you want a large number of gas struts or you require the same force struts in the future - use variable force struts and adjust to your satisfaction. Send us the adjusted struts - we will measure the pressure and in future we can supply gas struts to your required force. Also available in Stainless Steel. See pages 26 to 30. Strut Reference NS V 6 Rod Diameter 6 ube Diameter 15 Force N Minimum Maximum 30 Maximum Stroke See Page 10 Special sizes are available to order. Nito Struts Cat. 7 Rev.1 NS V 8 NS V 10 NS V Supplied at maximum force unless specified Please contact us with your requirements. PAGE 9
2 VARIABLE FORCE 6-15 RANGE - 30N FIXING CENRES SROKE EXENDED LENGH Ø = M6x1x9 Ø 15 B2 VARIABLE FORCE 6-15 RANGE B2 M6x1 NS V 6/ M6x1 20 NS V 6/ NS V 6/ 340 E1 NS V 6/ 440 Maximum force N can be reduced to minimum 30N. E1 1 1 NS V 6/60/B2/E1/350N YPE SROKE END FIING UBE END FIING IMPORAN NOE Nito Struts Cat. 7 Rev.1 PAGE 10
3 VARIABLE FORCE 8-18 RANGE N FIXING CENRES SROKE EXENDED LENGH B7 Ø = M6x1x9 VARIABLE FORCE 8-18 RANGE Ø 1 B7 NS V 8/ NS V 8/ 350 NS V 8/ 450 E4 NS V 8/ 550 E4 Maximum force 650N can be reduced to minimum 75N. NS V 8//B7/E4/650N YPE SROKE END FIING UBE END FIING Nito Struts Cat. 7 Rev.1 IMPORAN NOE PAGE 11
4 VARIABLE FORCE RANGE 1 to N FIXING CENRES SROKE EXENDED LENGH B11 Ø Ø 23 = x9 VARIABLE FORCE RANGE B11 NS V 10/ NS V 10/ 350 NS V 10/ 450 E9 NS V 10/ NS V 10/ E9 NS V 10/ 850 Maximum force 1N can be reduced to minimum N. C2 C2 32 NS V 10//B11/E9/1N 32 YPE SROKE END FIING UBE END FIING Nito Struts Cat. 7 Rev.1 IMPORAN NOE PAGE 12
5 VARIABLE FORCE RANGE 0 to N FIXING CENRES SROKE EXENDED LENGH Ø 14 = M10x1.5x12 Ø 2 B15 VARIABLE FORCE RANGE B15 M10 x1.5 M10 x1.5 NS V 14/ 280 NS V 14/ 380 NS V 14/ 480 E13 NS V 14/ NS V 14/ E13 NS V 14/ 880 NS V 14/ 1080 C3 Maximum force 0N can be reduced to minimum N. C NS V 14//B14/E11/0N YPE SROKE END FIING UBE END FIING Nito Struts Cat. 7 Rev.1 IMPORAN NOE PAGE 13
Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More informationMagnetic Proximity Switches Series CST - CSV and CSH
Magnetic Series CST - CSV and CSH Reed, Electronic»» Designed to fit into the cylinder profile barrel»» 3 models (CST - CSV - CSH) are suitable for all Camozzi s cylinder range»» With or without M8 connector
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationNormcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
More informationPlunger Cylinder. 1 Description. 2 Technical data
Plunger Cylinder Piston rods ø 50 290 mm, construct to EN 81-2 / EN 81-50 Intended for personnel and freight elevators Series BZG For side-ram or central arrangement Seals with low frictions and war Piston
More informationACTIVE PARTNER OF CUSTOMERS
ACTIVE PARTNER OF CUSTOMERS Destek develops and manufactures gas springs, dampers and position adjustment products for everything that needs to be lifted, lowered, moved, slowed down, controlled and set
More informationDITZLER VULKAN DR-1000/DR-1900. Plastic welding equipment
DITZLER VULKAN Plastic welding equipment DR-1000/DR-1900 > Ultra light and slim > Very easy to use > Powerful, even in confined spaces > Double protective insulation for safety > None of the apparatus
More informationRM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
More informationKA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
More informationExplosion-Proof Electric Unit Heaters
Type FX4 FX4 Explosion-Proof Electric Air Heaters FX4 heaters are UL listed and/or CSA certified for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries,
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More informationHydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08
Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationTHERMOSTATIC ACTUATORS WITH LIQUID-FILLED SENSITIVE ELEMENTS AND TEMPERATURE LOCKING
0A-GB THERMOSTATIC ACTUATORS WITH LIQUID-FILLED SENSITIVE ELEMENTS AND TEMPERATURE LOCKING SERIES SD - CD - GA MAIN CHARACTERISTICS - Available in the versions: Standard With Remote Sensor With Remote
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More information3. X-REAS (Relative Absorber System)
CH-57 3. X-REAS (Relative Absorber System) General The oil passages of the front and rear shock absorbers of the X-REAS are connected diagonally, with a center control absorber interposed. This ensures
More informationDuctile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
More informationMini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide
Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure
More informationDOUBLE ACTING CYLINDERS, Ø 32 to 125 mm
DOUBLE ACTING CYLINDERS, 3 to 15 mm conforming to ISO 6431 - VDMA 456 STANDARDS SERIES 450 - TYPE : PES (with profiled barrel) P30-GB.R8 DOUBLE ACTING PNEUMATIC CYLINDERS - TYPE PES WITH PROFILED BARREL
More informationHigh Flow High Pressure Solenoid Valve. Double 3/2 N.C. solenoid valve with manual override
Double 3/2 N.C. solenoid valve with manual override General The high pressure/high flow capacity solenoid valve, as not available on the market, was especially engineered by BIFFI in the early '70s for
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More informationVacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
More informationSHOWERS 85-100 SHOWERS
SHOWERS 85-100 85 SHOWERS SHOWER HEADS 87 NEPTUNE 89 SHOWER PANEL SERIES PERFECT TIME SHOWER PANEL SERIES 91 NEPTUNE 1042T 93 PERFECT TIME 1042T 94 NEPTUNE MEDICAL 95 TOUCH SH 1000T 96 NEPTUNE 1032 97
More informationMorrison Bros. Co. General Product Specifications
Morrison Bros. Co. General Product Specifications Tank Mounted Spillbox The spill containment device is manufactured to contain spills and drips that may occur at the fill point on aboveground storage
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFITTINGS AND VALVES. Ductile Cast Iron Hydrants
FITTINGS AND VALVES Ductile Cast Iron Hydrants Düker Hydrants Important Elements of a Modern Public Water Supply Ductile cast iron hydrants Düker underground and pillar hydrants Hydrants are an important
More informationOriginal NiTO Couplings. NiTO Industrial Spray Guns. NiTO Leading supplier of high quality couplings for the professional market www.nito.
Original NiTO Couplings NiTO Industrial Spray Guns NiTO Leading supplier of high quality couplings for the professional market www.nito.com The complete Quick coupling programme from the leading manufacturer
More informationHALF COUPLER HALF COUPLER
HALF COUPLER HALF COUPLER Lightweight & low profile KUPO professional couplers are constructed from high tensile aluminum extrusion and have been developed for installa ons where load capaci es of up to
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationHeat Pipe Selection Revision 12/04/2001
Heat Pipe Selection Revision 12/04/2001 Heat pipes are being used very often in particular applications when conventional cooling methods are not suitable. Once the need for heat pipe arises, the most
More information*Specify Oversize When Ordering
Cylinder Block Deck Cracks On Caterpillar 3208 Engines and Caterpillar explain how to inspect the Caterpillar 3208 engines for block cracks. Part No. Location Insert OD Size Depth Tapered ID 3906854 Intake
More informationInstallation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationPlastic Injection Molds
Training Objective After watching the program and reviewing this printed material, the viewer will become familiar with the variety, design, and productive use of plastic injection molds. Mold components
More information1ZSE 2750-105 en, Rev. 8. Transformer bushings, type GOE and GOE(2) Technical guide
1ZSE 2750-105 en, Rev. 8 Transformer bushings, type GOE and GOE(2) Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible
More informationOildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationPlastic lining by Roschütz
Plastic lining by Roschütz first class corrosion prevention for hollow parts High-quality corrosion protection of hollow parts Hollow part-coating with Teflon, PFA, Tefzel, Halar - approved for best inside
More informationActuators & Positioners LP - Linear Pneumatic Piston Actuator. Cylinder Actuators. High resolution, sensitivity, and fast response
Data Sheet DS/LP-EN Rev. F Actuators & Positioners LP - Linear Pneumatic Piston Actuator Cylinder Actuators High resolution, sensitivity, and fast response Available with 4 to 20mA position feedback Cylinders
More informationThe Eaton Advantage. machinery using accumulators.
Accumulators Table of Contents The EATON Advantage................................................................................. 3 Application Benefits...................................................................................
More informationautomatic back-flush program non-spattering hot water delivery large boiler with one heat-exchanger per group, thermo-syphon system
Mirage Bastone automatic back-flush program non-spattering hot water delivery large boiler with one heat-exchanger per group, thermo-syphon system extra long lower tubes for cool running enlarged cavity
More informationPiston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
More informationPRESSURE REDUCING VALVES
0E0-GB PRESSURE REDUCING VAVES MAIN FEATURES The pressure reducing valve is able, by varying its pressure drops, to hold the downstream pressure of the fluid at a constant level against changes in the
More informationLED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature
LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More informationABLOY DC 240 DOOR CLOSER Heavy duty door closer
ABLOY DC 240 DOOR CLOSER Heavy duty door closer ABLOY DC240 heavy duty door closer offers a wide variety of functional options. ABLOY DC240 DOOR CLOSER The ABLOY DC240 have been developed to meet the exacting
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationSOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
More informationSeries VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25
Mechanical Valves Series VM Model Dimensions (mm) VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25 VM100 Side ported 17 x 44 x 25 Bottom ported 17 x 44 x 30 VM200 25 x 40 x 52 One way roller
More informationBETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS PART NUMBER: 132581 REVISION: A RELEASE DATE: 24 March 2000 Page 1 of 10
More informationJUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g. drinking and surface water monitoring,
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationAutomatic Bypass Control AVDO
Application AVDO is a self-acting constant flow control primarily used either to maintain minimum flow rates through e.g. a low-capacity gas boiler or to control the differential pressure in a central
More informationAccumulators, Accessories and Spares
Accumulators, Accessories and Spares HY10-4004/UK - Effective June 1st, 2013 Index Table of Contents Table of Contents 2 Introduction 3 How to Size? 4 General Information Accumulators 5-8 Bladder Accumulators
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More information08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
More informationElectromagnetic pump designation GOTEC
Electromagnetic pump designation GOTEC E T S 21 - E : In beginning of the designation for all pumps based on the Electromagnetic principle. 1 T : means the complete square motor (coil + metallic frame
More informationDATA PD-111-400. RE21.., KX..., 1194339 Quick Release Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA Function RE.., KX..., 949 Doc. No. Y058 (Rev. 00) February 0 PD--0 The Quick Release Valve is generally used in the supply to the spring portions of spring brake
More informationAccess Hatch Solutions
Access Hatch Solutions Table of Contents Access Hatch Load Ratings 4 Aluminum Access Hatches 8 Ductile Iron Access Hatches 21 Table of Contents Product Description Page Aluminum Access Hatches Access Hatch
More informationEdition 11/2007. www.desteklift.com
GLOBAL PLAYER IN GAS SPRINGS Gas spring production is a highly competitive market with only a few innovative, high quality manufacturers who can do the job right. Destek Gas Springs is one of the few.
More informationAccess Hatch Solutions. ejco.com 800 626 4653
Access Hatch Solutions ejco.com 800 626 4653 Table of Contents Access Hatch Load Ratings 4 Aluminum Access Hatches 8 Ductile Iron Access Hatches 21 Table of Contents Product Description Page Aluminum Access
More informationRODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446
RODESS AND CYINDERS WITH CARRIER RACKET-TYPE ST SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length of
More informationTAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More information!Hydraulic Jacks & Tools
!Hydraulic Jacks & Tools Why hydraulics? Hydraulics is the kind of power transmission which allows the greatest density of forces. There is no other kind of power transmission that will transmit comparable
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More informationISO 9001 Certified Manufacturing Facility SPECIFICATIONS
TS-250 Rev. 0-00-12-07 Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 4D-MT with Vapor
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationElectric Flow Boiler
Electric Flow Boiler EHC offer the most comprehensive range of electric boilers in the market and with our wealth of knowledge and technical expertise we have designed the Slim Jim Electric Flow Boiler
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationPerformance analysis of a Gamma type Stirling engine using three different solar concentrators
Performance analysis of a Gamma type Stirling engine using three different solar concentrators Krishanu Ganguly 1, Bhushan Dewangan *2, Sumit Banerjee 3, Rajeev Kumar 4 1 Krishanu Ganguly 2 Bhushan Dewangan
More informationExperience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More informationTOTAL PACKAGE REELS, DRUMS AND ANCILLARIES
TOTAL PACKAGE REELS, DRUMS AND ANCILLARIES www.pentregroup.com HEARL HEATON ABS Plastic Flanged Process Reels HEARL HEATON, with over 40 years of experience, is the recognised leader in the design and
More informationBERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More informationThermocouples & Thermoresistances
hermocouples & hermoresistances hermocouples emperature probes are basically two wires with particular thermoelectric features, electrically insulated from each other and from the external protection body.
More informationThermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
More informationThermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
More informationEuro Profile Mortice Locks
Euro Profile Mortice Locks We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Optimum Hinged Door Optimum Hinged Door Optimum Sliding Door Pinnacle
More informationFLEXCON EXPANSION VESSELS. Flamco FLEXCON 2-80. Flexcon. Expansion vessels FLEXCON 110 1000 FLEXCON M. Flamco FLEXCON V-B.
FLEXCON EXPANSION VESSELS Flamco 1 Flexcon Expansion vessels FLEXCON 2-80 FLEXCON 110 1000 FLEXCON M Flamco FLEXCON V- 2007 edition / UK Flamco Flexcon the first name in expansion vessels Flamco has over
More informationModular and Flexible. We want to make it easier for you! Innovative Riveting System. with blind rivet adapter BR 20. with blind rivet adapter BR 50
Modular and Flexible Innovative Riveting System 800 bar with blind rivet adapter BR 20 We want to make it easier for you! with blind rivet adapter BR 50 Engineered and Designed by with blind rivet nut
More informationHANDLEY CURB BOXES. 2 Inch Curb Box Cast Iron Collar. 2 Inch Gas Curb Boxes. 2 Inch Water Curb Boxes. Superior Grade Curb Box Parts and Accessories
Rev. 08/05 HANDLEY CURB BOXES 2 Inch Curb Box Cast Iron Collar 2 Inch Gas Curb Boxes 2 Inch Water Curb Boxes Superior Grade Curb Box Parts and Accessories Rev. 03/03 This page is intentionally blank to
More informationMDrive Linear Actuators
MDrive Linear Actuators All-in-one linear motion systems Delivering long life, high accuracy and unsurpassed repeatability, all in a package that is extremely compact and affordable. MDrive Linear Actuators
More information