Standard Royal Inspiration Station

Transcription

1 IS2 Standard Royal Inspiration Station R Assembly uide IS2_2013_A Check out our other products online at or assistance, please contact us: info@copernicused.com Have your packing slip ready for reference WARNIN This product is meant to be assembled by an adult. In its unassembled state, small parts present a hazard. To be used under direct supervision of an adult. Check out some of our other great products Accessory Rods (2) Telescopic Extension (2) Accessory Rod rackets (2) Chart Paper uides (3) Whiteboard Support (2) Tiny Tub (2) Rear rame Upper (2) Whiteboard (1) rame Upright (1) Page Paw (2) Rear rame Lower (2) Middle rame (1) Ultra Safe Premium ookledge (1) ig ook Rack (4) Tub Channel (4) Open Tub (4) ront rame (2) Tub Rack (1) Really ig Tub (1) ig ook Rack (1) ront Channel (2) Please Recycle

2 IS2 Royal Inspiration Station - Parts R efore beginning, you should have: Additional tools required (Not to Scale) : Adjustable wrench Contents - ox 1 (numbers in brackets are individual part numbers) Rubber mallet Whiteboard (32104) Whiteboard Support (23211) Stretcher ottom, 1 Top (33035) rame Upright - 32 (33033) ook Ledge (PAL30) Accessory Rod rackets & Knob 1 Left, 1 Right ( Set) (23207L) (23207R) Telescoping Extension 1Left, 1 Right ( Set) Square Accessory Rod (33027) Round Accessory Rod (33028) Chart Paper uide 3x (31059) ront rame (33029) Rear rame Lower (33030) Rear rame Upper (33031) Middle rame (33032) Chart Paper Support (33034) ase (23210) ig ook Rack Chart Paper (23205) Hooks (310171) Top Shelf (23206) Tub Rack (31058) Rear Hanging Hook (31061) ig ook Divider 4x (31060) Page Paw (AC450-0) Individual S-Hook (31018) Individual Tub Channel 4x (23208) ront Channel 1 Left, 1 Right ( Set) (23209R) (23209L) 2

3 IS2 Royal Inspiration Station - Parts R Continued: Hardware Actual Size - ox 1 ag = (43201) (numbers in brackets are individual part numbers) Contents - ox 2 A M6 x 65mm olt 4x (43265) M6 x 40mm olt 20x (43240) C M6 x 30mm olt 4x (43230) D M6 x 25mm olt 6x (43225) E M6 x 20mm olt 20x (43220) M6 arrel Nut 28x (43272) Open Tub 4x (CC4068-C) (CC4068-R) (CC4068-Y) Tiny Tub (CC4072-) (CC4072-O) Really ig Tub (CC4073-) 10 lbs Weight Limit 15 lbs Weight Limit 6mm Lock Washer 26x (43273) I M6 Nut 4x (43270) H 8mm Lock Washer 28x (43274) J 6mm Acorn Nut 4x (43271) Driver for Cordless Drill (Not to Scale) (43280) Optional use for faster assembly Caster 4x (41003C) Individual Allen Key (43281) 3

4 Tips for Assembly - Using this Manual Watch for These Helpful Symbols 2 Person This symbol denotes a 2 Person Task. or safety, please ensure that there are two people working on steps displaying this symbol Watch for this symbol throughout the Assembly Instructions. Wherever you see it, pay close attention. The symbol denotes a step needing extra attention to ensure it is done correctly. The Star symbol highlights an advisory note efore You egin Layout and identify all of the included parts The hardware has been packed according to size, separate them based on those sizes Read the assembly instructions over once to familiarize yourself with them Please note that in its unassembled state, this product contains parts that can be a hazard to small children; it should be assembled by an adult. As You Assemble the Unit ollow the steps in sequence efore beginning each step, find the part(s) that you need for that step Pay attention to the labeling on the parts, they are there to help direct you at certain stages The title of each step states what you will be doing. Review the text and the pictures as you build the unit. After Assembly; efore Use Remove the plastic film from the Whiteboard before writing on it Don t forget to check out our tips for your whiteboard at: Life Time rame Warranty Life Time Tub Warranty Validate Your Warranty On-Line To validate your five year frame warranty & lifetime tub warranty, submit the ON-LINE form at My idea of education is to unsettle the minds of the young and inflame their intellects. - Robert Maynard Hutchins 4

5 1 x 4 x 4 You ase x 2 ront rame x 2 Rear rame Lower x 2 Caster x 4 Note: Do not tighten any fasteners unless prompted Install ront rame, Rear rame Lower & Casters should begin the installation with the brakes in the up position Top View - Looking Down on Unit Ensure rame pieces are square with the ase Note orientation ront of unit rake Press Casters firmly into the Side rame: - Casters will click into place - If necessary, place a wrench between the wheels & tap in with a rubber mallet 5

6 2 x 2 x 2 2 Person Task Middle rame x 1 Install Middle rame Stand unit right side up 3 x 6 x 6 Rear rame Upper x 2 rame Upright - 32 x 1 Stretcher x 2 uild Rear rame Note the label on the rame Upright, and ensure the part is installed correctly 6

7 4 x 4 x 4 2 Person Task Whiteboard Supports x 2 Install Whiteboard Supports Top Mounting hole Top Mounting hole asten bottom bolts first Left Side Right Side Left Whiteboard Support Right Whiteboard Support Left Side Mounts at outer hole on bottom 7

8 5 C J x 4 x 4 x 4 Whiteboard Height & Orientation 2 Person Task Whiteboard x 1 High position Select Your Whiteboard Height & Orientation asten bottom bolts first DO NOT OVER TIHTEN Middle position Low position Top Mounting holes J Left Right asten bottom bolts first Mounts at outer hole on bottom 8

9 6 E H x 4 x 4 x 4 Top Shelf x 1 Install Top Shelf E H 7 A H x 4 x 4 x 4 Chart Paper Support x 1 Top 2 - High Install Chart Paper Support Middle 2 - Medium ottom 2 - Low A H Note: You should align your Chart Paper Support so that it corresponds with the Whiteboard height. ottom two holes for Lowest oard Height Middle two holes for Middle oard Height Top two holes for Highest oard Height 9

10 8 Chart Paper Hooks x 2 Attach Chart Paper Hooks Place an empty hardware bag over the frame to prevent the unit from being scratched Hooks snap onto the frame easily Slide bag free once the hook has been snapped onto the frame. Snap Place bag here for protection 9 ook Ledge x 1 Install ook Ledge Note: There are multiple locations on the side of the Whiteboard to install the ook Ledge. Choose the location that works for your classroom. Insert one hook into the appropriate hole on one side of the Whiteboard rame. Pull out the opposite hook & snap into corresponding hole. Note: The spring tension is designed to discourage children from unhooking the ook Ledge. 10

11 10 I x 4 x 4 x 4 2 Person ig ook Rack x 1 ig ook Rack Divider x 4 Install ig ook Rack & Dividers I 11 Chart Paper uide x 3 Install Chart Paper uides Install the Chart Paper uides into the holes in the Top Shelf Press uides firmly into place Ensure uides are secure 11

12 12 D x 6 x 4 x 2 H x 4 2 Person Task Accessory Rod rackets & Knobs x 2 Round Accessory Rod x 1 Square Accessory Rod x 1 Rear Whiteboard Hook x 2 Install Accessory Rods 1 Remove Knob first 1. Unfasten the Knob from the bracket and put aside. Align one Accessory Rod racket with the holes in the Upper Rear rame. asten. 2. Slide the Rear Whiteboard Hooks onto the Round Accessory Rod (Detail A ) H D 3. Slide the Square Accessory Rod and the Round Accessory Rod into their locations, ensuring hole on square rod is turned upwards and Rear Whiteboard Hooks are facing away from the unit. Cap the other end with the second Accessory Rod racket. asten. 4. asten the ends of the Round Accessory Rod to the Accessory rackets asten. 2 Detail A 3 4 Ensure hole is turned upwards D D H Note Hook orientation Repeat on other side. 12

13 13 Telescoping Rod x 2 Knob x 2 Install Telescoping Rods Slide Telescoping Rods into the left and right side of the Square Accessory Rod. Insert Knobs into place on the Accessory Rod. Loosening these will allow for the rods to slide in or out, while tightening them will hold the rods at the desired location. Ensure that the correct hook is on the left and right side. Hooks should face towards the back of the unit. 14 E H x 4 x 4 x 4 Top ront Channel x 2 1 Left, 1 Right ottom Install ront Channels Identify the right and left ront Channels Align the ront Channels with the bottom holes on the Middle and ront rame It may help to loosely install first, and tighten once both bolts are through the part. E H Right Side 13

14 15 ront Tub Rack x 1 Install ront Tub Rack Identify Tub Rack orientation Angle the ront Tub Rack into the ront Channel. Press down firmly to snap into place. Once installed, rack should slide smoothly in channel. ack bar rests on top Angle the rack into position Snap UP 16 E H x 12 x 12 x 12 Tub Channel x 4 Top ottom Install Tub Channels There are 5 different channel placement options. Choose positions for the channels that will organize the tubs best for you. E H You may always upgrade the Standard Inspiration Station to the Premium model if you need more tubs. See our website for more information. asten middle bolt first, this will make the other two bolts easier to 14

15 17 S Hook x 2 Snap Install S Hooks Place an empty hardware bag over the frame to prevent the unit from being scratched Pull bag free once the hook has been snapped over the frame Place bag here to prevent scratching lbs Weight Limit Open Tub x 4 Tiny Tub x 2 Insert Tubs Angle tub into the Channel Slide 15

16 R IS2 Standard Royal Inspiration Station R Assembly uide IS2_2013_A Check out our other products online at or assistance, please contact us: info@copernicused.com Have your packing slip ready for reference Dear Educator, Thank you for purchasing one of our products. I hope the assembly of your Standard Royal Inspiration Station went well. If you have any questions, or concerns, or ideas for how we can improve, please call us at , where someone will be happy to help. Enjoy using your new product, and happy teaching, Jim Phillips President Quality schools are the In everyone s life at some My idea of education is Nothing has a better result of quality teachers time our inner fire goes to unsettle the minds of effect upon children than going above and beyond out. It is then burst into the young and inflame praise. the call of duty. VICKI CARUANA flame by an encounter with another human being. We should all be their intellects. ROERT MAYNARD HUTCHINS SIR PHILLIP SIDNEY thankful for those people who rekindle the inner spirit. ALERT SCHWEITZER 16