Grass trimmers, brushcutters and clearing saws
|
|
- Lorena Rich
- 8 years ago
- Views:
Transcription
1 Grass trimmers, brushcutters and clearing saws Our hydraulic press puts our range of steel alloys to the test with ten tons of force. In this way we can determine the brittleness and ruggedness of the steel. The selection of optimal materials for our cutting tools helps to ensure safe and efficient work. 74
2 When it comes to brushcutters and clearing saws, only the best steel makes the cut. Petrol brushcutters and clearing saws 77 Petrol grass trimmers for trimming grass 77 Petrol brushcutters for mowing around the home and garden 78 Petrol brushcutters for long grass and landscape maintenance 79 Clearing saws 81 Petrol backpack brushcutters 83 Electric brushcutters 84 Cordless brushcutters 86 Brushcutters and clearing saws» overview 88 Accessories for brushcutters and clearing saws 90 Cutting tools 92 Accessories for cutting tools 94 Cutting tools» overview 96» Mowing lines 100 7
3 Grass trimmers, brushcutters and clearing saws Powerful, economical and environmentallyfriendly Very easy to start Always top performance Easy to operate 4 Less-tiring work Technology 1 STIHL 2-MIX engine The STIHL two-stroke engine with 2-MIX technology cuts fuel consumption by up to 20%. It reduces emissions by up to 70% too, compared with STIHL 2-stroke engines of the same performance class without the 2-MIX technology. 2 STIHL M-Tronic (M) Fully-electronic engine management guarantees the best possible engine performance as well as a constant maximum speed and superb acceleration. There's only one start position on the combi-lever too, which means easy starting with a minimum of pulls. Convenience 3 STIHL ErgoStart (E) An extra spring between the crankshaft and starter cord keeps load peaks to a minimum so they can barely be felt on the cord. That means trouble-free, almost effortless starting. 4 STIHL anti-vibration system The STIHL anti-vibration system reduces handle vibrations, making the tool less tiring and more comfortable to operate. It is available in a 1-point version and powerful models there s also a 4-point version. Multi-function handle All the engine controls - including the ECOSPEED partial loaded function - can be controlled with just one hand. It couldn't be easier to use. Please note that not all products are equipped with the features listed here. Only the most important functions are described on this page. You can find further explanations and information from page 242 onwards and online at 76
4 FS 38 FS 0 C-E ErgoStart 27.2 cm 3, 0.6 kw/0.9 hp, 4.2 kg a. Lightest grass trimmer in the STIHL range. Ideal for trimming grass edges. Multi-function handle, loop handle, STIHL 2-MIX engine. Order No Exc. VAT Inc. VAT FS cm 3, 0.8 kw/1.1 hp, 4.6 kg a. With simplified starting system. Multifunction handle, loop handle, tool-less handle adjustment, STIHL 2-MIX engine. Order No Exc. VAT Inc. VAT FS R Petrol grass trimmers for trimming grass Powerful entry level tools - ideal for home gardens Perfect for mowing small areas of grass and trimming lawn edges Easy to start Available with a curved or straight shaft 27.2 cm 3, 0.7 kw/1.0 hp, 4.4 kg a. With simplified starting system, to mow smaller areas of grass. Multi-function handle, loop handle, STIHL 2-MIX engine. Order No Exc. VAT Inc. VAT R = Loop handle E = ErgoStart a Weight excluding fuel, cutting tool and guard 27.2 cm 3, 0.7 kw/1.0 hp, 4.9 kg a. For comfortable operation where space is limited. Multi-function handle, loop handle, tool-less handle adjustment, STIHL 2-MIX engine, basic harness. Order No Exc. VAT Inc. VAT FS (not shown) For FS see page 88. Order No Exc. VAT Inc. VAT
5 Grass trimmers, brushcutters and clearing saws FS 6 RC-E FS 70 RC-E ErgoStart ErgoStart 27.2 cm 3, 0.8 kw/1.1 hp, 4.8 kg a. For comfortable operation where space is limited. Multi-function handle, loop handle, STIHL 2-MIX engine, basic harness. Order No Exc. VAT Inc. VAT cm 3, 0.9 kw/1.2 hp, 4.8 kg a. Comfortable and light brushcutter. ErgoStart, multi-function handle, STIHL 2-MIX engine, basic harness. Order No Exc. VAT Inc. VAT FS 6 C-E FS 70 C-E Petrol brushcutters for mowing around the garden ErgoStart ErgoStart For large gardens For mowing large areas of grass High-performance tools with various cutting tools 27.2 cm 3, 0.8 kw/1.1 hp,.2 kg a. For working on areas of tough grass. Multi-function handle, bike handle, STIHL 2-MIX engine, optimised trimmer angle, straight shaft, basic harness. Order No Exc. VAT Inc. VAT cm 3, 0.9 kw/1.2 hp,.4 kg a. For mowing large areas of tough grass. STIHL ErgoStart, multi-function handle, bike handle, STIHL 2-MIX engine, basic harness. Order No Exc. VAT Inc. VAT R = Loop handle E = ErgoStart a Weight excluding fuel, cutting tool and guard 78
6 FS 90 FS 94 C-E ErgoStart 28.4 cm 3, 0.9 kw/1.3 hp,.8 kg a. For working on areas of tough grass. STIHL 1-point anti-vibration system, automatic decompression, multi-function handle, bike handle, tool-less handle adjustment, STIHL 4-MIX engine, straight shaft, solid drive shaft, double shoulder harness. Order No Exc. VAT Inc. VAT cm 3, 0.9 kw/1.2 hp, 4.9 kg a. Lightest brushcutter in this segment. STIHL 1-point anti-vibration system, ErgoStart, bike handle, control handle with ECOSPEED partially loaded function, STIHL 2-MIX engine, straight shaft, double shoulder harness. Order No Exc. VAT Inc. VAT FS 90 R FS 94 RC-E Petrol brushcutters for long grass and landscape maintenance Robust, dependable, powerful ErgoStart Ideal for mowing large areas of long grass Also perfect for clearing weeds, tree cultivation, overgrown thickets and bushes 28.4 cm 3, 0.9 kw/1.3 hp,. kg a. Similar to the FS 90 but has a loop handle for increased access. Order No Exc. VAT Inc. VAT cm 3, 0.9 kw/1.2 hp, 4.6 kg a. All the same great features of the FS 94, but has a loop handle for increased access. Order No Exc. VAT Inc. VAT Suitable fuels and lubricants are listed from page 174 onwards. 79
7 Grass trimmers, brushcutters and clearing saws FS 100 FS 130 FS 240 C-E FS 100 R b loop handle Order No Exc. VAT Inc. VAT ErgoStart FS 130 R b loop handle 31.4 cm 3, 1.0 kw/1.4 hp,.8 kg a. For working on areas of tough grass. STIHL 1-point anti-vibration system, automatic decompression, multi-function handle, bike handle, STIHL 4-MIX engine, straight shaft, double shoulder harness cm 3, 1.4 kw/1.9 hp,.9 kg a. For working on areas of tough grass. STIHL 1-point anti-vibration system, automatic decompression, multi-function handle, bike handle, tool-less handle adjustment, STIHL 4-MIX engine, straight shaft, solid drive shaft, double shoulder harness. Order No Exc. VAT Inc. VAT cm 3, 1.7 kw/2.3 hp, 7.4 kg a. Ideal for agricultural and horticultural work. STIHL 1-point anti-vibration system, STIHL ErgoStart, multifunction handle, bike handle, tool-less handle adjustment, STIHL 2-MIX engine, straight shaft, solid drive shaft, double shoulder harness. Order No Exc. VAT 7.00 Inc. VAT Order No Exc. VAT Inc. VAT Order No Exc. VAT Inc. VAT Protection and comfort FS 3PROTECT protective trousers for clearing saw use from page Very comfortable protective trousers made of cotton with 18 % durable stretch and a triple protective function: Impact protection, thorn and water resistant. >> More on page 217 E = ErgoStart R = Loop handle
8 FS 360 C-E FS 410 C-E ErgoStart ErgoStart 37.7 cm 3, 1.7 kw/2.3 hp, 8. kg a. For mowing tough grass. STIHL 4-point antivibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-less handle adjustment, STIHL 2-MIX engine cm 3, 2.0 kw/2.7 hp, 8. kg a. For mowing tough grass. STIHL 4-point antivibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-less handle adjustment, STIHL 2-MIX engine. With ADVANCE universal harness Order No Exc. VAT Inc. VAT With ADVANCE universal harness Order No Exc. VAT Inc. VAT Clearing saws Comfortable, durable and powerful professional tools For forestry work, landscaping and road maintenance For removing scrub and uncontrolled growth For mowing large areas STIHL professional tip: Using a clearing saw? Work in comfort by using one of our harnesses, like the double shoulder version. It distributes the weight of the machine evenly over the shoulders. For shredding and sawing jobs in the forest Personal protective equipment suitable for use with clearing saws can be found on pages 216. a Weight excluding fuel, cutting tool and guard b Comes with AutoCut head 81
9 Grass trimmers, brushcutters and clearing saws FS 460 C-EM FS 460 C-EM K FS 490 C-EM FS 60 C-EM M-Tronic M-Tronic M-Tronic M-Tronic 4.6 cm 3, 2.2 kw/3.0 hp, 8. kg a. For working in challenging areas of tough grass. STIHL 4-point antivibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-less handle adjustment, STIHL 2-MIX engine, STIHL M-Tronic. 4.6 cm 3, 2.2 kw/3.0 hp, 8.4 kg a. Similar to the FS 460 C-EM but ideally suited to those users who need a powerful clearing saw. Order No Exc. VAT Inc. VAT FS 460 C-EM L 1.6 cm 3, 2.4 kw/3.3 hp, 9.1 kg a. For professional use in landscape maintenance. STIHL 4-point anti-vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-less handle adjustment, STIHL 2-MIX engine, STIHL M-Tronic, straightforward starting technology, stop button, with ADVANCE universal harness. 7.1 cm 3, 2.8 kw/3.8 hp, 10.2 kg a. Powerful STIHL clearing saw. STIHL 4-point anti-vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-less handle adjustment, STIHL 2-MIX engine, STIHL M-Tronic, straightforward starting technology, stop button, with ADVANCE PLUS universal harness. With ADVANCE universal harness Order No Exc. VAT Inc. VAT cm 3, 2.2 kw/3.0 hp, 8.6 kg a. Shares the same features as the FS 460 C-EM but is ideally suited to users over 190 cm tall. Order No Exc. VAT Inc. VAT Order No Exc. VAT Inc. VAT 1, Order No Exc. VAT 1, Inc. VAT 1, STIHL professional tip: When working with clearing saws, besides complete face protection, additional safety glasses must be worn. >> More on page 226 Well protected from page 197 When it comes to working in the forest, take a look at the K version of our clearing saws. A short shaft, flat trimmer angle, special harness and a handle designed for for selective control makes it the right tool for a tough job. 82
10 FR 130 T 36.3 cm 3, 1.4 kw/1.9 hp, 10.3 kg a. For thinning shrubs on embankments. STIHL anti-vibration system, automatic decompression, multi-function handle, loop handle, STIHL 4-MIX engine, split shaft for simple transport and storage. Order No. Exc. VAT Inc. VAT FR 460 TC-EM M-Tronic Petrol backpack brushcutters 4.6 cm 3, 2.2 kw/3.0 hp, 11.2 kg a. For mowing jobs that require moving from place to place over large areas which are difficult to access. STIHL anti-vibration system, STIHL ErgoStart, multi-function handle, loop handle, STIHL 2-MIX engine, STIHL M-Tronic, stop button, tool bag, split shaft. Order No. Exc. VAT Inc. VAT For effective, flexible mowing on embankments and slopes Perfect for vineyards, orchards and mountain meadows Comfortable carrying system Flexible shaft E = ErgoStart M = M-Tronic K = Short shaft L = Long shaft T = Split shaft a Weight excluding fuel, cutting tool and guard 83
11 Grass trimmers, brushcutters and clearing saws FSE 31 FSE V, 24 W, 2.2 kg a. For trimming and thinning jobs. Loop handle, tool-free handle adjustment, pivoting mowing head. Order No Exc. VAT 7.0 Inc. VAT FSE V, 40 W, 3.9 kg a. For trimming, thinning and small surface jobs. Loop handle, the mowing line automatically readjusts when tapping the mowing head on the ground. Order No Exc. VAT Inc. VAT FSE 81 Electric grass trimmers Light, comfortable handling Designed for use around the home and garden Whisper quiet so ideal for noise sensitive areas Cuts beautifully around stones, plants, flower pots and other objects 230 V, 00 W, 2.2 kg a. For trimming and thinning jobs in the garden. Telescopic, loop handle, tool-free handle adjustment, spacer bracket to protect trees, pivoting mowing head. Order No Exc. VAT 7.00 Inc. VAT V, W, 4.7 kg a. Ideal for mowing smaller areas of uncontrolled growth. Rubberised 2-component handle, loop handle, electronic overload protection, support wheel, the mowing line automatically readjusts when mowing head is tapped on the ground. Order No Exc. VAT Inc. VAT a Weight excluding cable, including cutting tool and guard.
12 FSA 6 FSA 8 Cordless brushcutter for thinning work. Cutting arc diameter 300 mm, soft rubberised handle for good grip and comfortable working, infinitely variable loop handle, the mowing line automatically readjusts when tapping the mowing head on the ground, quiet, no ear protection necessary, weight 2.7 kg b. Cordless brushcutter for mowing among obstacles and around trees and bushes. Cutting arc diameter 30 mm, soft rubberised handle for good grip and comfortable working, infinitely variable loop handle, tool-less handle adjustment, the mowing line automatically readjusts when tapping the mowing head on the ground, quiet, no ear protection necessary, infinitely variable speed control, spacer bracket to protect trees and fences, weight 2.8 kg b. Cordless grass trimmers For amateur gardeners and landscapers Quickly and easily ready to use Lithium-ion battery makes for easy handling FSA 6 shell (excluding battery and charger) Order No Exc. VAT Inc. VAT FSA 8 shell (excluding battery and charger) Order No Exc. VAT Inc. VAT Great in noise sensitive residential areas, around hospitals, cemeteries, schools and so on Suitable lithium-ion batteries and other accessories can be found from page 18 onwards. b Weight excluding battery, including cutting tool and guard 8
13 Grass trimmers, brushcutters and clearing saws FSA 90 R FSA 90 NEW Available from spring 201! NEW Available from spring 201! Cordless brushcutter for working on large areas of tough grass. Diameter of cutting circle 380 mm with mowing head, loop handle, engine controls with ECOSPEED partial load function, basic harness, no ear protection required, weight 2.8 kg a. FSA 90 R excluding battery and charger Order No Exc. VAT Inc. VAT Cordless brushcutter for working on large areas of tough grass. Diameter of cutting circle 260 mm with grass cutting blade, bike handle, engine controls with ECOSPEED partial load function, double shoulder harness, no ear protection required, weight 3.2 kg a. FSA 90 excluding battery and charger Order No Exc. VAT Inc. VAT Cordless brushcutters For amateur gardeners and landscapers Quickly and easily ready for use Easy handling thanks to the lithium-ion battery For use in noise-sensitive residential areas and around hospitals, cemeteries, schools, etc Suitable lithium-ion batteries and other accessories can be found from page 18 onwards. 86 R = Loop handle a Weight excluding battery, cutting tool and guard
14 Order number Price Exc.VAT Price Inc. VAT Rated voltage (V) Power output (W) Weight (kg) Sound pressure level e (db(a)) Sound power level e (db(a)) Vibration level left/right f (m /s 2 ) Total length without cutting tool (cm) Diameter of cutting circle (mm) Standard cutting tool Drive shaft in shaft Loop handle/bike handle Tool-less handle adjustment Harness/carrying system Electric grass trimmers FSE b / with mowing head line spool / FSE b / AutoCut mowing head 2-2 / FSE b / AutoCut mowing head C -2 flexible / FSE , b / AutoCut mowing head C -2 flexible / Cordless grass trimmers FSA 6 g i i 2.7 c / AutoCut mowing head C 4-2 / FSA 8 h i i 2.8 c / AutoCut mowing head C 4-2 / Cordless brushcutters FSA 90 R h a / AutoCut mowing head 2-2 / FSA 90 h a / Grass cutting blade / Order number Price Exc.VAT Price Inc. VAT Displacement (cm³) Power output (kw/hp) Weight (kg) d Sound pressure level e (db(a)) Sound power level e (db(a)) Vibration level left/right f (m/s²) Total length (cm) j Standard cutting tool Tank volume (l) STIHL anti-vibration system Automatic decompression STIHL ErgoStart (E) Multi-function handle/loop handle STIHL engine (2-MIX/4-MIX ) STIHL M-Tronic (M) Petrol backpack brushcutters FR 130 T / / AutoCut / 4-MIX FR 460 TC-EM / / Grass cutting blade / 2-MIX Fitted as standard E = ErgoStart b Weight excluding cable, including cutting tool and guard g Fixed engine speed Retrofittable (accessory) M = M-Tronic c Weight excluding battery, including cutting tool and guard h Infinitely variable engine speed T = Split shaft d Weight excluding fuel, cutting tool and guard i Price excluding battery and charger e K factor according to Dir. 2006/42/EC = 2. db(a) j Excluding cutting tool f K factor according to Dir. 2006/42/EC = 2 m/s
15 Grass trimmers, brushcutters and clearing saws Order number Price Exc.VAT Price Inc. VAT Displacement (cm 3 ) Power output (kw/hp) Weight (kg) a Sound pressure level b (db(a)) Sound power level b (db(a)) Vibration level left/right c (m /s 2 ) Total length without cutting tool (cm) Powerful petrol grass trimmers FS / / FS / / FS 0 C-E / / FS R / / FS / / Petrol brushcutters for mowing around the home and garden FS 6 RC-E / / FS 6 C-E / /. 170 FS 70 RC-E / / FS 70 C-E / / Petrol brushcutters for long grass and landscape maintenance FS 90 R / / FS / / FS 94 RC-E NEW / / FS 94 C-E NEW / / FS 100 R / / FS / / FS 130 R / / FS / / FS 240 C-E / / Clearing saws FS 360 C-E / / FS 410 C-E / / FS 460 C-EM / / FS 460 C-EM L / / FS 460 C-EM K Sawing / / FS 490 C-EM , / / FS 60 C-EM Sawing , , / / Fitted as standard E = ErgoStart M = M-Tronic a Weight excluding fuel, cutting tool and guard Retrofittable (accessory) K = Short shaft R = Loop handle b K factor according to Dir. 2006/42/EC = 2. db(a) L = Long shaft c K factor according to Dir. 2006/42/EC = 2 m/s 2 88
16 Standard cutting tool Tank volume (l) Drive shaft in shaft STIHL anti-vibration system Automatic decompression STIHL ErgoStart (E) Multi-function handle Loop handle/bike handle Tool-less handle adjustment Harness/carrying system STIHL engine (2-MIX/4-MIX ) STIHL M-Tronic (M) Mowing/shredding/sawing jobs AutoCut mowing head C flexible / 2-MIX AutoCut mowing head C flexible / 2-MIX AutoCut mowing head C flexible / 2-MIX Mowing head AutoCut C flexible / 2-MIX Mowing head AutoCut flexible / 2-MIX Mowing head AutoCut C flexible / 2-MIX Mowing head AutoCut C flexible / 2-MIX Mowing head AutoCut C flexible / 2-MIX AutoCut C 2-2 and blade flexible / 2-MIX Mowing head AutoCut C solid 1-point / 4-MIX / / AutoCut C 2-2 and blade solid 1-point / 4-MIX / / Grass cutting blade solid 1-point / 2-MIX / / Grass cutting blade solid 1-point / 2-MIX / / Mowing head AutoCut C solid 1-point / 4-MIX / / AutoCut C 2-2 and blade solid 1-point / 4-MIX / / Mowing head AutoCut C solid 1-point / 4-MIX / / AutoCut C 2-2 and blade solid 1-point / 4-MIX / / AutoCut 2-2 and blade solid 1-point / 2-MIX / / Mowing head AutoCut solid 4-point / 2-MIX / / Mowing head AutoCut solid 4-point / 2-MIX / / Mowing head AutoCut solid 4-point / 2-MIX / / Mowing head AutoCut solid 4-point / 2-MIX / / Chisel saw blade 200 mm 22 tooth 0.7 solid 4-point / 2-MIX / / Brush knife solid 4-point / 2-MIX / / Circular saw blade solid 4-point / 2-MIX / / 89
17 Grass trimmers, brushcutters and clearing saws Chest belt Double shoulder harness For ADVANCE universal harness, ADVANCE fluorescent orange and ADVANCE PLUS. Ensures the shoulder straps are securely positioned. Order No Exc. VAT.7 Inc. VAT 6.90 Harness With soft padding for improved comfort when working for prolonged periods. For FS FS 60. Order No Exc. VAT 3.42 Inc. VAT 42.0 Forestry harnesses For more comfortable operation of the STIHL FSA 6, STIHL FSA 8. Including attachment clip. The freely suspended leg protection allows for great freedom of movement. Ergonomic circular saw blades for forest applications. Very light. Tool bag also available. Order No Exc. VAT 6.08 Inc. VAT 7.30 Accessories for brushcutters and clearing saws Accessories designed to give you greater protection and make work more comfortable Range includes harnesses, hand guards, tool attachments and protective covers Basic harness Included as standard with most STIHL brushcutters. For more relaxed and safe working. For FS 38, FS 40, FS 4, FS 0, HL and HT. Order No Exc. VAT 9.00 Inc. VAT ADVANCE forestry harness Standard size, for FS 90 FS 60 Order No Exc. VAT Inc. VAT 8.00 XXL version for body height > 1.90 m, for FS 90 FS 60 Order No Exc. VAT 2.92 Inc. VAT 63.0 ADVANCE PLUS forestry harness With a comfort carry ring for quickly attaching and removing the clearing saw, for FS 0 FS 60. Order No Exc. VAT Inc. VAT a Weight excluding oil 90
18 1 Universal harnesses For strength-saving mowing and shredding. Ergonomic, comfortable, light. Chest belt and tool bag also available. Hand guard for shredding applications AR set of parts for attaching to AR 900 NEW HL 0o not adjustable ADVANCE universal harness Standard size, for FS 90 FS 60 Order No Exc. VAT 3.00 Inc. VAT Practical hand guard for FS 240, FS 360, FS 410, FS 460, FS 490, FS 10 and FS 60. Not suitable for K versions. Adapter for attaching the support cushion for FSA and BGA to the carrying system of the AR 900. Switching back and forth between the different support cushions can be done quickly and easily using the quick-clip. Hedge trimmer attachment. Bar length 0 cm, weight 1.6 kg. Approved for FS 90 R, FS 100 R and FS 130 R. XXL version for body height > 1.90 m, for FS 0 FS 60 and FSA 90. Order No Exc. VAT Inc. VAT 49.9 Order No Exc. VAT 13.2 Inc. VAT 1.90 Protective cover for brushcutters and clearing saws Order No Exc. VAT TBC Inc. VAT TBC HT Order No Exc. VAT Inc. VAT HL 13o adjustable ADVANCE universal harness, fluorescent orange High visibility. Ideal addition to reflective clothing when mowing in hazardous areas, for FS 0 FS 60. Perfect transport protection for the engine casing of brush cutters and clearing saws. Heat and oil resistant. Order No Exc. VAT 6.63 Inc. VAT 7.9 Tool bag Pole pruner attachment with lightweight bar. Bar length 30 cm, weight 1.3 kg a. Approved for FS 90 R, FS 100 R and FS 130 R. Order No Exc. VAT Inc. VAT Scrub cutter FH 13o Hedge trimmer attachment. Bar length 0 cm, weight 2.0 kg. Approved for FS 90 R, FS 100 R and FS 130 R. Order No Exc. VAT Inc. VAT Order No Exc. VAT 48.7 Inc. VAT 8.0 ADVANCE PLUS universal harness With a comfort carry ring for quickly attaching and removing the clearing saw, for FS 0 FS 60. For conveniently transporting tools. Features two sections. Can be easily attached to the universal and forestry harnesses. Attachment tools for cutting near the ground and mowing in narrow spaces. E.g. in car parks or on traffic islands. Bar length 2 cm, infinitely variable from 0 13, carrying position, weight 1.8 kg. Suitable for FS 90 R, FS 90, FS 100 R, FS 100, FS 130 R and FS 130. Order No Exc. VAT Inc. VAT 3.00 Order No Exc. VAT Inc. VAT 26.0 Order No Exc. VAT Inc. VAT
19 Grass trimmers, brushcutters and clearing saws Grass and light vegetation TrimCut mowing head Two lines, for mowing and clearing work. Mowing lines are extended by hand. AutoCut mowing head Two or four lines, for mowing and clearing work. Mowing lines are automatically extended when the mowing head is tapped on the ground. SuperCut mowing head Two lines, for mowing and clearing work. Mowing lines are automatically adjusted for optimal cutting length. DuroCut mowing head Two or four lines, for mowing and thinning work, even on tough grass. Up to four lines can be easily inserted. Cutting tools Wide variety of cutting tools for different applications For everything from simple mowing jobs, through to heavy-duty clearing work PolyCut mowing head Universal cutting tool for trimming and working on large areas. With three moving plastic blades. NEW For all kinds of vegetation 92
20 Heavy vegetation Reeds and bushes Bushes and thin trees Shredder blade Steel double blade for thinning and removing tough scrub and thorny hedges. Circular saw blade, scratcher-tooth Special steel tool for mid- and high-performance brushcutters. For gnarled bushes and thin tree trunks. Circular saw blade, chisel-tooth Special steel tool for mid- and high-performance brushcutters. For gnarled bushes, thin tree trunks, sawing and clearing work. Circular saw blade, carbide-tipped Very robust special tool for use in dry, sandy areas and for cutting near ground level. Grass cutting blade Made of steel. Double and quadruple cutters. With 2, 4, 8, 40 and 44 teeth. For mowing tough, dry grass and reeds. Brush knife Two or three cutters, made of steel, reversible. For thinning and removing tough grass, scrub and thorny hedges. 93
21 Grass trimmers, brushcutters and clearing saws Guard for mowing heads Universal guard for mowing heads, grass cutting blades and brush knives Provides protection against flying debris but still enables a clear view of the area to be mown. For FS 6, FS 70. Order No Exc. VAT Inc. VAT 1.9 For FS 360 C-E, FS 410 C-E, FS 460 C-EM, FS 490 C-EM, FS 60 C-EM. Order No b Exc. VAT 18.0 Inc. VAT Guard for grass cutting blades and brush knife a Provides protection against flying debris and stones. With apron for mowing heads. For FS 90, FS 100, FS 130, FS 240 C-E, FS 240 RC-E, FS 480, FR 130 T, FR 480 C-F. Order No Exc. VAT Inc. VAT Shredding starter pack for clearing saws Protection against flying debris. Includes shredder blade, shredder guard and fastening components. Accessories for cutting tools For a variety of applications and jobs Guards and files For FS 6, FS 70. Order No Exc. VAT Inc. VAT 1.9 For FS 360 C-E, FS 410 C-E, FS 460 C-EM, FS 490 C-EM, FS 60 C-EM. Order No Exc. VAT 1.0 Inc. VAT Shredder blade guard For retrofitting the FS 360 C-E, FS 410 C-E, FS 460 C-EM, FS 490 C-EM. Order No Exc. VAT Inc. VAT Special mowing guard Protection against flying debris. For FS 360 C-E, FS 410 C-E, FS 460 C-EM, FS 490 C-EM, FS 60 C-EM. Order No b Exc. VAT Inc. VAT Approved for use with nylon line mowing heads. Protects against flying debris, while the area to be mown remains in clear view. For FS 90, FS 100, FS 130, FS 240 C-E, FR 130 T. Order No Exc. VAT Inc. VAT a Not for circular saw blades b For shredder knife 270-2
22 Stop kit and protection for circular saw blades Protection wear Flat file File handles For accurate cutting with a circular saw blade. For FS 90 FS 130, FS 240 C-E, FS 480 Ø 200 mm Order No Exc. VAT 18.0 Inc. VAT For FS 360 C-E, FS 410 C-E, FS 460 C-EM, FS 490 C-EM, FS 60 C-EM, Ø 200 mm Order No Exc. VAT Inc. VAT 2.00 For FS 360 C-E, FS 410 C-E, FS 460 C-EM, FS 490 C-EM, FS 60 C-EM, Ø 22 mm Order No Exc. VAT Inc. VAT 2.00 For FS 460 C-EM K Ø 200 mm Order No Exc. VAT Inc. VAT For DuroCut 20-2 / Order No Exc. VAT 4.67 Inc. VAT.60 Saw set For chisel-tooth circular saw blades. Order No Exc. VAT 23.7 Inc. VAT 28.0 File holder with round file For scratcher-tooth circular saw blades. 10 mm. Order No Exc. VAT 1.96 Inc. VAT 2.3 Mill saw file Flat file for brush knives and scratcher-tooth circular saw blades. 200 mm. Order No Exc. VAT 4.08 Inc. VAT 4.90 Flat file Wooden handle for all round, triangular and flat files from 3.2 to. mm. Order No Exc. VAT 1.08 Inc. VAT 1.30 FH 3 2-component handle. For flat files up to 10 mm. Order No Exc. VAT 2.38 Inc. VAT 2.8 Sharpening templates For FS 460 C-EM K Ø 22 mm Order No Exc. VAT Inc. VAT For chisel-tooth circular saw blades. Order No Exc. VAT 9.8 Inc. VAT 11.0 Triangular sharpening file Flat file for brush knives and scratcher-tooth circular saw blades. With case for tidy storage. 200 mm. Order No Exc. VAT 4.46 Inc. VAT.3 For brush knives. Double-bladed brush knife Order No Exc. VAT Inc. VAT 13.2 Triple-bladed brush knife Order No Exc. VAT Inc. VAT 13.2 STIHL professional tip: For scratcher-tooth circular saw blades. Order No Exc. VAT 4.17 Inc. VAT.00 We can provide the right guard for every cutting tool. They'll give you extra protection against objects that get thrown up during cutting, such as grass and small stones. Just ask your dealer about the perfect guard for you. 9
23 Grass trimmers, brushcutters and clearing saws Line and plastic tools a Order number Price Exc. VAT Price Inc. VAT FS 38/FS 40/FS 0 C-E FS R/FS /FS 6 R/FS 6/ FS 6 C-E/FS 70 RC-E/FS 70 C-E FS 90/FS 100 FS 94 RC-E/FS 94 C-E FS 130 FS 240 C-E TrimCut mowing head TrimCut 31-2, 2.4 mm TrimCut 41-2, 2.7 mm TrimCut 1-2, 2.7 mm AutoCut mowing head Line spool, 1.4 mm Line spool, 1.4 mm Line spool, 1.6 mm AutoCut 2-2, 1.6 mm AutoCut C 4-2, 2.0 mm AutoCut C -2, 2.0 mm AutoCut 2-2, 2.4 mm AutoCut C 2-2, 2.4 mm AutoCut 30-2, 2.7 mm AutoCut 40-2, 2.7 mm AutoCut 40-4, 2.7 mm SuperCut mowing head SuperCut 20-2, 2.4 mm SuperCut 40-2, 2.4 mm PolyCut mowing head PolyCut PolyCut 20-3 b PolyCut 41-3 b DuroCut mowing head DuroCut -2 c DuroCut 20-2 d DuroCut 40-4 e Can be combined a Only approved with guard c Including 12 line pieces L Round mowing line Not approved b Can be equipped with cut-to-length d Including 12 line pieces XL Square mowing line mowing lines as an alternative e Including 12 line pieces XXL Pentagonal mowing line 96
24 FS 360 C-E/FS 410 C-E FS 460 C-EM/FS 460 C-EM L/ FS 490 C-EM FS 60 C-EM FSE 31 FSE 41 FSE 2 FSE 60/FSE 81 FSA 6/FSA 8 FSA 90 R/FSA 90 FR 130 T FR 460 TC-EM 97
25 Grass trimmers, brushcutters and clearing saws Metal tools Order number Price Exc. VAT Price Inc. VAT FS R/FS /FS 6 R/FS 6/ FS 6 C-E/FS 70 RC-E/FS 70 C-E FS 90/FS 100/FS 130 FS 94 RC-E/FS 94 C-E/ FSA 90 R/FSA 90 FS 240 C-E FS 360 C-E/FS 410 C-E/FS 410 C-E L FS 410 C-E K/FS 460 C-EM K FS 460 C-EM/FS 460 C-EM L/ FS 490 C-EM FS 60 C-EM FR 130 T FR 410 C-E/ FR 460 TC-EM Grass cutting blade a 230 mm (2 B) mm (2 B) NEW mm (4 B) mm (4 B) mm (8 T) mm (8 T) mm (40 T) b mm (40 T) b mm (44 T) c NEW mm (44 T) c NEW Brush knife a 20 mm (3 B) mm (3 B) mm Special (2 B) b mm (3 B) mm Special (3 B) b Shredder blade d e 270 mm (2 B) mm (2 B) Circular saw blade, scratcher-tooth e f 200 mm (80 T) mm (44 T) mm (48 T) Circular saw blade, chisel-tooth e f 200 mm (22 T) mm (22 T) mm (24 T) Circular saw blade, carbide-tipped e f 22 mm (36 T) Can be combined B = Blades a Only approved with guard c Low-spin e Only approved for FS with bike handle Not approved T = Teeth b More durable, longer service life d Only approved with shredder guard f Only approved with stop, see page 9 98
26 The perfect cut, rain or shine Our unique blade, deck and grass catcher box help our lawn mowers cut, collect and compact dry summer or damp autumn grass. So you can enjoy your lawn for longer, whatever the weather. We share your passion. For more information visit PROUDLY PART OF THE STIHL GROUP 99
27 Grass trimmers, brushcutters and clearing saws Round mowing lines (rolls) Order No. Exc. VAT Inc. VAT Roll 1.4 mm x 16.0 m Roll 1.6 mm x 20.0 m Roll 2.0 mm x 1.3 m Roll 2.0 mm x 62.0 m Roll 2.0 mm x m Roll 2.0 mm x m Roll 2.0 mm x m Roll 2.4 mm x 14.6 m Roll 2.4 mm x 43.0 m Roll 2.4 mm x 86.0 m Roll 2.4 mm x m Roll 2.4 mm x 4340 m Roll 2.4 mm x m Roll 2.7 mm x 9.8 m Roll 2.7 mm x 68.0 m Roll 2.7 mm x 21.0 m Roll 2.7 mm x 38.0 m Roll 2.7 mm x m Roll 3.0 mm x m Roll 3.0 mm x m Roll 3.3 mm x 91.0 m Roll 4.0 mm x 28.0 m a Roll 4.0 mm x 9.0 m a Square mowing lines (rolls) Mowing lines Comprehensive range of mowing lines for all STIHL mowing heads Made from wear-resistant and long-lasting flexible material With different shapes, cross-sections and diameters Colour coded to help you select the right line thickness Order No. Exc. VAT Inc. VAT Roll 2.4 mm x 43.0 m Roll 2.4 mm x 86.0 m Roll 2.4 mm x 27.0 m Roll 2.4 mm x m Roll 2.7 mm x 34.0 m Roll 2.7 mm x 68.0 m Roll 2.7 mm x m Roll 2.7 mm x 39.0 m Roll 3.0 mm x.0 m Roll 3.0 mm x m Roll 3.0 mm x m Roll 3.3 mm x 40.0 m Roll 3.3 mm x m Roll 3.3 mm x 23.0 m Round and quiet mowing lines (rolls) Order No. Exc. VAT Inc. VAT Roll 1.6 mm x 20.0 m b Roll 2.0 mm x 1.3 m Roll 2.0 mm x 62.0 m Roll 2.4 mm x 14.6 m Roll 2.4 mm x m Roll 2.7 mm x 9.8 m Roll 2.7 mm x 68.0 m Roll 2.7 mm x 21.0 m a For DuroCut b NEW
28 Pentagonal mowing lines (rolls) Mowing lines Order No. Exc. VAT Inc. VAT Roll 2.4 mm x 0.0 m Roll 2.4 mm x m Roll 2.7 mm x 80.0 m Roll 2.7 mm x 21.0 m Roll 3.0 mm x 60.0 m Roll 3.0 mm x m Roll 3.0 mm x m Spools of line Set of plastic blades 1.4 mm, 2 x 4.0 m for FSE 31 Order No Exc. VAT.38 Inc. VAT mm, 2 x 4.0 m for FSE 41 Order No Exc. VAT.38 Inc. VAT 6.4 Twelve plastic blades for PolyCut. Order No Exc. VAT 6.17 Inc. VAT 7.40 Line pieces 48 line pieces per packet. Round mowing lines Round and quiet mowing lines Square mowing lines 1.4 mm Pentagonal mowing lines 1.6 mm 2.0 mm 2.4 mm With quiet line. 1.6 mm, 2 x 4.0 m for FSE 2 Order No Exc. VAT.38 Inc. VAT 6.4 For DuroCut -2 and 20-2, size L, 2 mm, serrated Order No Exc. VAT.33 Inc. VAT 6.40 For DuroCut 20-2 and 40-4, size XL, 3 mm, serrated Order No Exc. VAT 7.0 Inc. VAT 9.00 For DuroCut 40-4, size XXL, 4 mm, serrated Order No Exc. VAT 9.42 Inc. VAT mm 3.0 mm 3.3 mm 4.0 mm STIHL professional tip: We recommend you put your new mowing lines in water for 24 hours before you use them. It increases the flexibility of the line so extending its life
Lawn tractors. Front mower
Consumer Line 2011 Lawn tractors Designed for medium to large green areas. Our lawn tractors are built on a strong structure and equipped with up to 108 cm cutting deck, featuring Multiclip for optimum
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN BRUSHCUTTING OPERATIONS ASSESSMENT SCHEDULE
NPTC Registered Charity No. 1096429 STONELEIGH PARK, WARWICKSHIRE CV8 LG Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE IN BRUSHCUTTING OPERATIONS
More informationThe Fall Outdoor Power Celebration
The Fall Outdoor Power Celebration Celebrating 50 Years in the chainsaw business X-TORQ Saw Box Bonus Offer Introducing the 576 XP Autotune Cutting edge technology Bring on the snow Enter to win Fall Platinum
More informationRaw power. Smart design.
Raw power. Smart design. Chain saw STIHL MS 362 C-M with M-Tronic With fully electronic engine management The new STIHL MS 362 C-M Raw power, smart design made by STIHL. More power, lighter weight and
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More informationUNITOR VACUUM cleaners
UNITOR VACUUM cleaners Unitor VCD15 a compact, heavy-duty dry vacuum cleaner for accommodation areas The smallest unit in the Unitor range, the VCD15 is purpose-made for use on cruise and passenger vessels.
More informationsailboat Proven engines, saildrives and options for all conditions
sailboat Proven engines, saildrives and options for all conditions Great equipment. Great sailing. For a sailor there is no better feeling than the wind in your sails, the sun on your face and a boat perfectly
More informationtools for home and garden Welcome home 2010 / 11
Welcome home 2010 / 11 You re welcome www.ikra.de info@ikra.de Deutschland Zentrale ikra GmbH Schlesier Straße 36 D64839 MünsterAltheim Germany Telefon: 0049607130030 Fax: 00496071300330 2 Success and
More informationGuide to Safe Working with Timber and Chainsaws
Guide to Safe Working with Timber and Chainsaws Our vision: A national culture where all commit to safe and healthy workplaces and the safe and sustainable management of chemicals. Introduction This guidance
More informationSPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
More informationDR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationOutdoor Clothing Buying guide
Outdoor Clothing Buying guide This Outdoor Clothing buying guide has been developed by Muddy Faces to help practitioners purchase effective outdoor clothing on a range of different budgets. This guide
More informationConnect. Cable preparation and cutting tools
Connect Cable preparation and cutting tools 390 Our range of cable preparation tools includes hand-operated & ratchet action cable cutting tools, wire preparation & stripping tools and SWA & hydraulic
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationFor the management of young forests, integrated harvesting, and removal of problem trees
EN Felling heads Energy wood heads Stroke harvesters uprooters For the management of young forests, integrated harvesting, and removal of problem trees Suitable for all base machines 1 Naarva offers a
More informationMATERIAL HANDLING TIRES & WHEELS
FORKLIFTS NARROW AISLES PORT APPLICATIONS MATERIAL HANDLING TIRES & WHEELS Industry-leading durability reliability and Tires + Wheels + Service = The Right Solution Solideal s Right Solution maximizes
More informationSAILBOAT 2015 ENGINES, OPTIONS AND NEWS
SAILBOAT 2015 ENGINES, OPTIONS AND NEWS 2 A MATTER OF RELIABILITY A MATTER OF RELIABILITY Whether you see sailing as a purely fun and relaxing pastime or as a challenge to conquer sea and wind, you always
More informationTrailmowers Type Beskrivelse Pris excl. moms Pris inkl. moms
Trailmowers Type Beskrivelse Pris excl. moms Pris inkl. moms T11544* 44" TRAILMOWER - 11.5 HP Briggs & Stratton I/C, recoil start, center hitch with offset capability, rear discharge, optional remote operator
More informationUsed to join the withies together. Don t use low tac tape, it s not strong enough! Tear or cut strips ready for use.
Lantern Making You will need: Withies Buff willow withies are strong, light and bendable and are used for making the structure of the lantern. They come in bundles of various lengths, the shorter withies
More informationTeam Skills Challenge Event # 1 Plant Layout Score Sheet
Team Skills Challenge Event # 1 Plant Layout Score Sheet State Name: Team Members: 1. 2. 3. 4. Placement of Plant Material 25 Deduct 5 points/plant not placed within 6 inches +/- of correct placement to
More informationANSWER KEY. Work and Machines
Chapter Project Worksheet 1 1. inclined plane, wedge, screw, lever, wheel and axle, pulley 2. pulley 3. lever 4. inclined plane 5. Answers will vary: top, side, or bottom 6. Answers will vary; only one
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationJohn Deere I Walk Behind Mowers
John Deere I Walk Behind Mowers We ve ploughed over a million fields In 1837, John Deere, a young American blacksmith, revolutionised the face of farming by perfecting the world s first commercially successful
More informationFeatures. Kubota Diesel Engine. Clean Emission. Electronic Governor. High Lift Capacity
Kubota Diesel Engine Powerful Kubota diesel engines mean faster, more efficient job performance. These F-Series engines have power to spare. Their high torque rise ensures faster, smoother recovery under
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationThe load carrier system designed for professionals
The load carrier system designed for professionals THULE PROFESSIONAL The rugged time-saving system Thule Professional is a load carrier system from the world leader in utility transportation. Every aspect
More informationProduct # Overall Length Claw Blade Width Head Width Weight 55-099 18 in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2.
Stanley Hand tools stanley Fubar Forcible entry tools Forcible entry tool designed by responders for vehicle extrication and extreme demolition. 8-in-1 tool for prying, splitting, board bending and striking
More informationPetrol Hedge Trimmer - PHT8462
Petrol Hedge Trimmer - SAFETY AND OPERATING MANUAL IMPORTANT: Read these instructions carefully and be sure you understand them. There is a risk of serious personal injury if you do not follow the instructions
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
More informationHR46 HARVESTER. Thinning Specialist
HR46 HARVESTER Thinning Specialist The history of Sampo Rosenlew forest machines Sampo Rosenlew today The founder of Sampo Rosenlew, mr Timo Prihti was born and raised on a farm. In Finland this means
More informationNARROW AISLE FLEXI. The next generation in space saving efficiency
G4 The next generation in space saving efficiency G4 Europe s most popular articulated truck - now with industry leading features for enhanced and improved productivity. The Flexi G4 electric powered articulated
More informationSweepmaster 1200 / 1500 RH For the economic cleaning of large company premises
Cleaning Technology Municipal Technology Sweepmaster 1200 / 1500 RH For the economic cleaning of large company premises Ride-on sweepers for up to 16,200 m 2 /h area coverage Sweepmaster 1200 / 1500 RH
More informationTOOLS FOR SELF RELIANCE REFURBISHING SHEET No 2. Registered Charity No 280437. Saws for Woodworking
Registered Charity No 280437 Saws for Woodworking Issued December 2002 Registered Charity No 280437 page no 1 SAW TYPES Rip saw For cutting along the grain Crosscut saw [A smaller version is known as a
More information307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationBuild a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic
Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Coated Paper 2 Balsa Sheets (10-1/2 x4 x3/16 ) 2 Alligator
More informationWOLF-Garten exceptional brand
MTD consolidates the pan-european brand WOLF-Garten exceptional brand New product line for professional tradespeople Every year, WOLF-Garten products convince consumers, product testers, editors and other
More informationPlate carrier, Strap-on DF -13 MANUAL
Plate carrier, Strap-on DF MANUAL THE COMPLETE SYSTEM What is the complete system? The strap on system is developed to be an integral part of the soldier s equipment, working together with all other parts
More informationVARIABLE CHAMBER BALER VEGA 170 HQ HD HD CUT SYSTEM
VARIABLE CHAMBER BALER THE RANGE Pick-up Two newly-designed pick-ups, both with large diameter helical conveyors placed in the external section of the rotor. This technical solution ensures uniform and
More informationFeed systems. Effective handling
Feed systems Effective handling THE WAY TO MAKE IT OPTIMIZED The latest generation of automatic wire processing machines operates at high rates of acceleration and speed. This places maximum demands on
More informationTABLE OF CONTENTS INTERIOR BANNER DISPLAYS 2-4 LIGHT BOX DISPLAYS 5 EXTERIOR SIGN DISPLAYS 6 HARDWARE 7-9
DISPLAY CATALOG TABLE OF CONTENTS 2-4 LIGHT BOX DISPLAYS 5 EXTERIOR SIGN DISPLAYS 6 7-9 Whether you need a small yard sign or an oversized banner display, look to Signs and Graphics by FedEx Office to
More informationSAILboat 2014 ENGINES, OPTIONS AND NEWS
SAILboat 2014 ENGINES, OPTIONS AND NEWS 2 3 Whether you see sailing as a purely fun and relaxing pastime or as a challenge to conquer sea and wind, you always need to trust your equipment. That is why
More informationThe tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
More informationDUPLEX ROLLERS AND TRENCH COMPACTORS. LP range
DUPLEX ROLLERS AND TRENCH COMPACTORS LP range GET IT DONE Customers look to you for great compaction. Our job is to provide equipment that help you deliver. Together we create quality. A customer that
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationMORE CARE. BUILT IN. VOLVO EXCAVATOR. hydraulic hammers
MORE CARE. BUILT IN. VOLVO EXCAVATOR hydraulic hammers For extra-tough conditions, Volvo hammers deliver high impact Stubborn rock. Concrete debris. Frost-locked earth. These are the kinds of conditions
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More informationSimply the most user friendly battery charger in the world. now everyone can recharge their own batteries
Simply the most user friendly battery charger in the world now everyone can recharge their own batteries is the simplest way to a fully charged battery. Insert the plug, attach the clamps to the battery
More informationTalon Self Propelled. Model: AM3051SP Engine: Surefire 4 Stroke Cutting Width: 480mm (19 ) Cutting Height: 12 Position Weight: 38kg
Model: AM3051SP Engine: Surefire 4 Stroke Cutting Width: 480mm (19 ) Cutting Height: 12 Position Weight: 38kg Talon Self Propelled Featuring the new Talon Surefire four stroke engine, self propelled rear
More informationEXPLOSIVE RACING GEAR
EXPLOSIVE RACING GEAR 0/0 SKIS GIANT SLAL GO BOOM. KERS Technology works like a turbo charger that provides additional acceleration by stiffening the tail of the ski in outturns. After every turn the ski
More informationOperating instructions. SCORP 220 Plus SCORP 360. Pipe Cutter. Code 790 014 762 Machine-no.:
precision. power. simplicity. Operating instructions Pipe Cutter SCORP 220 Plus SCORP 360 Code 790 014 762 Machine-no.: All rights reserved, in particular the rights of duplication and distribution as
More informationGENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
More informationHigh Security Heavy Duty Shredders VZ 14.00. Perfect shredding and high performance in DIN security levels 4 and 5
High Security Heavy Duty Shredders Perfect shredding and high performance in DIN security levels 4 and 5 Documentation High Security Heavy Duty Shredders / Page 1of 5 Perfect shredding and high performance.
More informationHorizontal order picking. With extra options.
Horizontal order picking. With extra options. The ECE Series 2 and 3. Performance and innovation. Extra ideas. The interface between man and machine must function effectively, especially when order picking.
More informationCutting and stripping tools
Cutting and stripping tools Introduction 2 Cutting and stripping tool 0.02-10 mm² (16 mm²) 3 Stripping tool for cables Ø 2.5-40 mm 4 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting
More informationRANGE OF STARMAXX AGRICULTURAL TIRES
1 DESCRIPTION * For load capacity on various speeds, and inflation figures, please consult your sales representative. ** Load capacity on standard speed and weight. Our company is entitled to make any
More informationOriginal Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
More informationCHICAGO PNEUMATIC SPRING 2013. Gyldig til 30062013. Alle priser i NOK, nto. eks. mva. Maintenance. People. Passion. Performance.
CHICAGO PNEUMATIC SPRING 2013 Gyldig til 30062013 Alle priser i NOK, nto. eks. mva. Maintenance People. Passion. Performance. CP7729 CP7748 2172,- ³ ₈, 563 Nm, 1,26 kg Art nr 894 107 7290 2333,- ½, 1250
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More information5-Other arc welding WELDING TOOLS AND ACCESSORIES
WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...
More informationPanel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST
Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy
More informationVOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
More informationOPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationLIFTING EQUIPMENT. Pallet Trucks 36. Scissor Lifts 38. Electric Platforms 40. Lifters & Stackers 41. Spare Parts 46
LIFTING EQUIPMENT Pallet Trucks 36 Scissor Lifts 38 Electric Platforms 40 Lifters & Stackers 41 Spare Parts 46 Pallet Trucks AC25 Pallet Truck Entry and Exit Roller prevent physical exertion of the operator
More informationRoll Up Banners. Display Banners. Pop-Up Counter. Display Wall. Flags. Free Hanging Banners
Roll Up Banners Display Banners Pop-Up Counter Display Wall Flags Free Hanging Banners Roll Up Banner: Roll Up Regular A robust and professional looking free standing retractable display. The unit comes
More informationPRODUCT MANUAL - M090
PRODUCT MANUAL - M090 MODEL 203/266 ELECTRIC CAN OPENER 1 SAFETY CAUTION: SEVERED CAN LIDS HAVE CUTTING EDGES. USE OF A PROTECTIVE GLOVE OR TONGS IS ADVISED WHEN HANDLING LIDS. WARNING To avoid risk of
More informationCoaching. Bags. Pro Kit Bag Made from heavy duty lined denier for extra durability. Vast
Pro Kit Bag Made from heavy duty lined denier for extra durability. Vast double zipped top with all round opening. and two end, one full length side pocket and one half length side pocket, ideal for storing
More informationTAMPA ELECTRIC COMPANY ENERGY SUPPLY EXPOSED BLADE CUTTING TOOLS PROGRAM
EXPOSED BLADE CUTTING TOOLS PROGRAM TABLE OF CONTENTS TITLE PAGE # PURPOSE / INTRODUCTION 1 RESPONSIBILITY 1 EMPLOYEE TRAINING INCLUDING DOCUMENTATION 2 GENERAL EXPECTATIONS 3 PERIODIC PROGRAM REVIEW 4
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationswimming pool accessories
76 swimming pool accessories 77 Dolphin pool cleaners Dolphin Plus Battery Cordless pool cleaner with lithium ion battery Cleans the pool in 1.5 hours Special programs Clogged filter bag indicator Incl.
More informationReflective Safety Products. Home Automotive Commercial
Reflective Safety Products Home Automotive Commercial Driveway Markers 2673 2689 2707 2706 2708 2661 2662 2690 12" Foot Spike 36" 46" 2673 12 Mini-Marker 6-Pack 2689, 2707 36 Driveway Marker 2706, 2708
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationUB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS
UB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS: Carefully read these instructions before installing your new air-conditioner. AUSTRALIAN AUTOMOTIVE AIR AL00500054E 1 Table
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationOXYGEN WITHOUT COMPROMISE
OXYGEN WITHOUT COMPROMISE PORTABLE OXYGEN CONCENTRATORS LIGHTWEIGHT & HANDSFREE NO CARTS! NO TANKS! LONG LASTING BATTERY LIFE FAA APPROVED At Inova Labs, we develop oxygen products that empower users to
More informationAriva Powerful Marketing Displays. Exhibit & Display Solutions
Ariva Powerful Marketing Displays Exhibit & Display Solutions Banner Displays BRONZE BRONZE XL (see page 3) (see page 3) Retractable banner stand Twist-out feet Black or silver finish Silver retractable
More informationpacific rehab Designs for Fun and Function Introducing the New HeadpodTM
pacific rehab Designs for Fun and Function Introducing the New HeadpodTM Basic Kit Basic Kit Mini Kit for smaller heads Optional Chin Strap Various mounting options available to mount to solid surfaces
More informationCORDLESS SCREWDRIVER + LAMP
CORDLESS SCREWDRIVER + LAMP Lightweight for fatigue-free work Ergonomically perfect design for any application Ideal for processing small and medium screws Magnetic bit holder Forward and reverse running
More informationOffering more. Series 3000 www.ripack.com
Offering more Series 3000 SAFE Prevent any burn risks and work in complete safety. With its unique, patented cold nozzle system, the gun remains cool during use. PRACTICAL Large, solid hanger ring. FAST
More informationIndustrial multi tool. Multi tool keychain. Summit multi tool
TOOLS AND LIGHTS Industrial multi tool 12 function stainless steel tool with unique gunmetal aluminium branding areas. Packed in black magnetic gift box. Size 109 x 48 x 21mm Print 10 x 10mm XD400 Multi
More informationCable-free by ATMOS LED technology ATMOS HL 21 LED. Totally free! The cable-free headlight. MedizinTechnik
Cable-free by ATMOS LED technology ATMOS HL 21 LED Totally free! The cable-free headlight MedizinTechnik 175 The headlight ATMOS HL 21 LED ATMOS HL 21 LED - The cable-free headlight! As a doctor you require
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationNow available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationDesigned in Italy by EN 14-1
Designed in Italy by EN 14-1 The new range of Work Line tool bags is designed in Italy by GT Line and made exclusively for professionals looking for the most reliable companion to their heavy duty daily
More informationDéfumair XR. ventilation and cmv. fire grade - label CE. smoke-extraction fan extraction casing for kitchen at F400-120. advantages.
Défumair XR smoke-extraction fan extraction casing for kitchen at F400-120 Personalisation : - Phonic insulation version by insulated double-skin panels through 25 mm glass wool, class M1. advantages Originally
More informationTotal Access. Stage 2 IFI accredited equipment. ceptional
Total Access Stage 2 IFI accredited equipment ceptional Features and Benefits Raised iconography on main console controls Colour contrasted belt and deck Laser cut numbers for easy seat positioning Colour
More informationSTEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13 (See Supplemental Instructions for trailers with heavy duty round footplates and/or Power Leveling Systems) PHONE SUPPORT
More informationcontents classic 3 switch 4 mini swing 5 sign wedge 6 chalkboards 7 all purpose A frames 8 H2O swingmaster 9 café banner 10 vision 11
the sign selection pavement swing signs pavement foil signs A boards forecourt signs pavement banner stand systems A frame banners promotion units snapframe signage suspended poster rails contents PAVEMENT
More informationPOLYURETHANE TIMING BELTS
B212 POLYURETHANE TIMING BELTS BRECOflex CO., L.L.C. translates the customers needs into new and expanded product lines. We are committed to partner with our customers in providing unique solutions and
More informationCushion Tyre Forklift Range 1.5 to 7.0 ton
1.5 to 7.0 ton Availability and specifications are determined regionally and are subject to change without notice. Please consult your authorised Toyota distributor for details. - Dentsu Brussels - 1/720/010/10077
More informationIntexma Graphics (Pty) Ltd
Intexma Graphics (Pty) Ltd Distributors for the complete supply of signage materials comprising of single and double roll up stands, banner walls, point of sale tables, signage boards and light boxes.
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationOSHA 1910.66 Remove impacted systems and components. Inspect systems prior to use.
Q: When do I remove my harness from service? A: ANSI (American National Standards Institute) A10.32-2004 states the service life of fall protection equipment manufactured of synthetic fiber shall be 5
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationTEST REPORT HUSQVARNA 455 Rancher
TEST REPORT HUSQVARNA 455 Rancher TEST CERTIFICATE HOLDER: Manufacturer and applicant: Husqvarna AB SE- 561 82 Huskvarna www.husqvarna.de Test Results and Evaluations Chainsaw Husqvarna 455 Rancher with
More information