Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the State of Ohio EDUCATION RELEVANT COURSES PUBLICATIONS.

Size: px
Start display at page:

Download "Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the State of Ohio EDUCATION RELEVANT COURSES PUBLICATIONS. Email: mhaiba@yahoo."

Transcription

1 Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the State of Ohio EDUCATION Skype: mhaiba2 The University of Toledo, Toledo, Ohio, USA. Doctor of Philosophy in Mechanical Engineering, May Ph.D. Dissertation: Mathematical Modeling and Analysis of a Variable Displacement Hydraulic Bent Axis Pump Linked to High Pressure and Low Pressure Accumulators Master of Science in Mechanical Engineering, 8/ 93. Master Thesis: Creep Behavior, Stress-Strain Response, and Toughness Characteristic of Haynes Alloy 556 at Elevated Temperatures. Bachelors of Science in Mechanical Engineering, 8/ 90. Birzeit University, West Bank, Palestine. Bachelors of Science in Mechanical Engineering. Completed 140 semester hours of 170 hours, and then transferred to the University of Toledo. RELEVANT COURSES Advanced Finite Element Analysis Fracture Mechanics Advanced Mechanics of Materials Advanced Topics of Controls Vehicle Dynamics Fatigue of Metals Advanced Measurement Systems Advanced Dynamics Elasticity PUBLICATIONS Books: 1. Abuhaiba, Mohammad, Variable Displacement Hydraulic Bent Axis Pumps, Mathematical Dynamic Modeling and Analysis, 1 st ed., 2009, Saarbruecken, VDM Publishing House Ltd. ISBN: Contributed in co-authoring chapter 7 entitled Hydraulic Hybrid Vehicles of the book: Kutz, Myer, Environmentally Conscious Transportation, Environmentally Conscious Engineering, Myer Kutz Series, ISBN-10: , ISBN-13: John Wiley & Sons. Journal Papers: Page 1 of 5

2 3. Abuhaiba, Mohammad and Olson, Walter, Geometric and Kinematic Modeling of a Variable Displacement Hydraulic Bent Axis Piston Pump, Computational and Nonlinear Dynamics Journal, ASME, October Volume 5, Issue 4, (12 pages) 4. Abu-Haiba, M.S.; Fatimi,A.; Zoroufi, M., Creep Deformation and Monotonic Stress-Strain Behavior of Haynes alloy 556 at Elevated Temperatures, Journal of Material Science, Volume 34, (2002), pp Conference Papers: 5. Abuhaiba, Mohammed S.; El Hayek, Maha M.; Haboub, Diana M.; Al Kafarna Naheel N, The Possibility of Implementing Geothermal Energy for Cooling Applications in Gaza Strip", International Conference on Water, Energy and Environment 2011, The American University of Sharjah, the United Arab Emirates. 6. Abuhaiba, Mohammad S.; and Olson, Walter, Modeling of a Variable Displacement Hydraulic Bent Axis Piston Pumps For Hybridizing Vehicles, in the 15 th Pacific Automotive Engineering Conference APAC15, SAE, Veitnam. 7. Mohaghegh, A.M.; Elahinia, M.H.; Abuhaiba, M.S.; Olson, W., Application of Smart Materials for Noise and Vibration of Hydraulic Systems, Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 4-7, 2007, Las Vegas, Nevada, USA. AWARDS The University of Toledo, Mechanical, Industrial and Manufacturing Engineering Department, Graduate Research Assistantship, 2007 to 2009 The University of Toledo, Mechnical, Industrial and Manufacturing Engineering Department, Graduate Teaching Assistantship, 2005 to 2007 CAD / CAM and CAE SKILLS JAVA ABAQUS CADKEY CARSIM FORTRAN IDEAS G-Code MS-Office BASIC NISA CLEAR-CUT CorelDraw AutoLISP FEMLAB MasterCAM Photoshop Motorola Micro-controllers AutoCAD MathCAD Flash VSA22 (3D Variation Analysis) 3DS MAX MatLab & SimuLink Adobe Reader Mathematica SolidWorks MiniTab ChemCAD TRAINING COURSES ATTENDED 1. Specialized Training Institute for Metal Industries, Amman Industrial City, Jordan. CNC programming of Lathe & Milling machines, From 3/2002 to 4/ The Islamic University of Gaza, Palestine. Page 2 of 5

3 2/2000 Programming, Principles of Java Building Interactive Media for Technical Education and Training Using Multimedia Software Tools, 12/98 3. TMX Philippines International, Philippines. EXPERIENCE Microprocessor Programming for Motorolla 68000, from 5/96 to 7/96 Module and Watchcase Design for Timex watches, 2/96 I. Horse Power Engineering (HPE), Gaza, Palestine, II. Page 3 of 5 Senior Mechanical Design Engineer & a Consultant, from 7/2010 to present CAD/CAM Product design and development Computer Numerical Control (CNC) Renewable & alternative energy systems Project management Technical & economic feasibility studies Projects done at HPE: 1. Design and Implementation of Elevator External Automatic Door, see the link: 2. Issuing the ISO certification for the university college of Applied Sciences in Gaza, Palestine 3. Research Project on Optimizing the Process of Dates Manufacturing 4. CO 2 Production Using Cryogenic Process 5. The Design and Build of CNC milling machine 6. Electric Wheelchair Conversion to Work Using Solar Photovoltaic Panels The Islamic University of Gaza, Industrial and Mechanical Engineering Departments, Gaza, from 9/3002 to Present Head of Industrial Engineering Department: from 9/2004 to 1/2005 and 9/2010 to 8/2011 Head of Industrial and Mechanical Engineering Departments: from 9/2011 to 8/2012 Taught the courses: 1. Theory of Machines 2. Machine Design II 3. Product Design for Ease of Manufacturing and Assembly (DFMA) 4. Design of Experiments 5. Computer Numerical Control (CNC) 6. Engineering Materials 7. Manufacturing Processes I 8. Manufacturing Processes II 9. Engineering Economy 10. Engineering Mechanics 11. Dynamics 12. Thermodynamics 13. Numerical Methods. Supervised the following senior projects: 1. Facility Layout and Design for Scrap Steel Recycling at Gaza

4 III. IV. Page 4 of 5 2. Heat Pipe Test Rig 3. The Possibility of Implementing Geothermal Energy for Cooling Applications in Gaza Strip 4. Tomato Green House Cooling Using Geothermal Technology Held the following Training programs in the Community Service & Continuing Education Center (CSCEC): 3D Solid Modeling using AutoCAD AutoLISP programming Computer Numerical Control (CNC) Prepare Engineering proposals for the CSCEC department. Member of the following Committees: Member and key founder of the Energy Group. Member of the Multimedia Group. Impact Engineering, Toledo, Ohio, USA. Consultant and Modeling Engineer, from 6/2007 to 10/2007 Build and develop a mathematical model for Power Management Strategy of Hydraulic Hybrid Vehicles to minimize fuel consumption. The University of Toledo, Toledo, Ohio, USA. Teacher Assistant, from 8/2005 to 5/ Mechanical Engineering Design I 2. Mechanical Engineering Design II 3. Materials Science 4. Vehicle Dynamics 5. CAD Technical Drawing V. University College of Applied Science & Technology, Gaza, Palestine. VI. Vice Dean for Academic Affairs, from 9/2001 to 8/2003. Director of the Community College of Applied Science & Technology, from 9/ 98 to 8/2001. Abuhaiba Co. Ltd., Gaza. Design & Consultant Engineer and a Manager, from 1/ 97 to 8/98 Design and development of dynamic mechanical systems on request. Mechanical elements design and selection. Solid modeling training using AutoCAD. Export of Engineering Equipment. Setup & Installation of computerized Time and Attendance Control Systems. VII. Timex Development Ltd., Jerusalem. Design and Research Engineer, From 9/ 95 to 12/ 96 Mechanical design and layout of the watch module and the physical constraints involved in fitting the design into the watch cavity using 3D modeling & simulation. Microprocessor programming. Research for new materials and technologies to manufacture the watch case with minimum secondary operations in a short time. VIII. Birzeit University, Birzeit, West Bank. Mechanical Engineering Instructor, from 10/ 93 to 8/ 95

5 IX. Taught: 1. Machine Design I 2. Machine Design II 3. Metallurgy 4. Dynamics 5. Machine Dynamics 6. Mechanical drawing 7. Measurement s lab. Supervised two senior projects. Member of the following Committees: 1. Head of the Assessment Committee for the Faculty of Engineering staff for the year 94/ Member of the Computer Committee for the year 94/95. Supervisor of the computer lab of the Faculty of Engineering for the year 94/95. Held training programs in 2D & 3D drawing using AutoCAD. Applied Technologies Co., Toledo, Ohio, USA. Design and Analysis Engineer, from 9/ 90 to 8/ 93 Helical and Spur gear design. Force and strength analysis of transmissions. Suspension and multi-leaf spring design. Belleville spring, and helical compression and extension spring design. FEA of transmissions (Stress, deflection and vibration) using NISA software. Programming. X. Tiller Tool & Die Co., Toledo, Ohio, USA. CNC programmer, from 9/90 to 2/91 CNC programming of lathe, mill, and EDM machines using CLEAR-CUT software. ORGANIZATIONS Registered Professional Engineer at the state of Ohio, P.E., PE License No American Welding Society (AWS), Chairman of the Student Chapter at the University of Toledo to 12/2008 Member of the American Society of Mechanical Engineers (ASME) RESEARCH INTERESTS Hydraulic Hybrid Vehicles Dynamic Modeling of Bent Axis Pumps CAD/CAM Design for Manufacturing and Assembly Finite Element Analysis Computer Numerical Control Alternative and renewable energy systems: Geothermal and Solar Page 5 of 5

Mechanical Engineering Technologies

Mechanical Engineering Technologies Technologies 1 Technologies Graduates of the Technology program are prepared to design mechanical systems, operate CAD systems, manage design projects, and perform product testing. Examples of graduate

More information

Department of Mechanical Engineering

Department of Mechanical Engineering About The Department The at BITS-Pilani is one of the premier departments in the institute that provides a unique educational and research environment. Its various Bachelor s, Master s and Doctoral Programs

More information

جامعة البلقاء التطبيقية

جامعة البلقاء التطبيقية AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First

More information

GRCC Manufacturing Technology

GRCC Manufacturing Technology Grand Rapids Community College GRCC Manufacturing Technology Plastics Manufacturing Quality Science Tooling and Manufacturing Welding 1 www.grcc.edu G r a n d R a p i d s C o m m u n i t y C o l l e g

More information

Distance Learning Program

Distance Learning Program Distance Learning Program Leading To Master of Engineering or Master of Science In Mechanical Engineering Typical Course Presentation Format Program Description Clarkson University currently offers a Distance

More information

James L. Salmon, Ph.D., P.E. Senior Engineer 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE

James L. Salmon, Ph.D., P.E. Senior Engineer 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE James L. Salmon, Ph.D., P.E. 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE Current Caulfield Engineering, LLC Naperville, Illinois Dr. Salmon specializes in the

More information

Core Subjects (CS) Compulsory Subjects (CPS) Optional Subjects (OS)

Core Subjects (CS) Compulsory Subjects (CPS) Optional Subjects (OS) UNDERGRADUATE DEGREE PROGRAMME IN MECHANICAL ENGINEERING School of Industrial Engineering, Albacete. Higher Technical School of Industrial Engineering, Ciudad Real and Polytechnic University School, Almadén

More information

HANDBOOK FOR GRADUATE STUDENTS MECHANICAL ENGINEERING. College of Engineering. Wayne State University. Detroit, Michigan

HANDBOOK FOR GRADUATE STUDENTS MECHANICAL ENGINEERING. College of Engineering. Wayne State University. Detroit, Michigan HANDBOOK FOR GRADUATE STUDENTS in MECHANICAL ENGINEERING College of Engineering Wayne State University Detroit, Michigan http://www.eng.wayne.edu/me/welcome.html September 2010 Table of Contents Introduction

More information

Design & Drafting Services

Design & Drafting Services Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material

More information

Farzin Heidari, Texas A&M University, Kingsville

Farzin Heidari, Texas A&M University, Kingsville AC 2011-936: STATUS STUDY OF SOUTH TEXAS AND NORTHERN MEX- ICO TECHNICAL COLLEGES OFFERING CAD/CAM/CNC PROGRAMS COMPARED TO AN ADVANCED MANUFACTURING PROGRAM IN CAD/CAM/C Farzin Heidari, Texas A&M University,

More information

Doctor of Philosophy in Systems Engineering

Doctor of Philosophy in Systems Engineering Doctor of Philosophy in Systems Engineering Coordinator Michael P. Polis Program description The Doctor of Philosophy in systems engineering degree program is designed for students who plan careers in

More information

Mechanical Engineering PhD / MASc / MEng

Mechanical Engineering PhD / MASc / MEng Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate ii Ryerson

More information

KHALID R. SHELTAMI OBJECTIVE & SUMMARY OF QUALIFICATIONS

KHALID R. SHELTAMI OBJECTIVE & SUMMARY OF QUALIFICATIONS Permanent Home Address: 142-B Medhurst Drive Ottawa, Ontario, Canada. K2G 5K8 Tel: (613) 274-7127 Work Address: King Fahd University of Petroleum and Minerals Mechanical Engineering Department P. O. Box

More information

HUMBER COLLEGE. Mechanical Engineering Technician Co-op

HUMBER COLLEGE. Mechanical Engineering Technician Co-op HUMBER COLLEGE Mechanical Engineering Technician Co-op Courses Required COMM 213 Technical Communications 1 3 MECH 106 Workshop Practice 0 MECH 120 Blueprint Reading Freehand Sketching 4 MECH 207 Engineering

More information

Graduate Programs in Mechanical and Aerospace Engineering

Graduate Programs in Mechanical and Aerospace Engineering Graduate Programs in Mechanical and Aerospace Engineering Space System Engineering Aerodynamics & Computational Fluid Dynamics (CFD) Aerospace Structures and materials Dynamics, Vibration and Controls

More information

ANALYTICAL AND EXPERIMENTAL EVALUATION OF SPRING BACK EFFECTS IN A TYPICAL COLD ROLLED SHEET

ANALYTICAL AND EXPERIMENTAL EVALUATION OF SPRING BACK EFFECTS IN A TYPICAL COLD ROLLED SHEET International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 119-130, Article ID: IJMET_07_01_013 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=1

More information

A Study of Durability Analysis Methodology for Engine Valve Considering Head Thermal Deformation and Dynamic Behavior

A Study of Durability Analysis Methodology for Engine Valve Considering Head Thermal Deformation and Dynamic Behavior A Study of Durability Analysis Methodology for Engine Valve Considering Head Thermal Deformation and Dynamic Behavior Kum-Chul, Oh 1, Sang-Woo Cha 1 and Ji-Ho Kim 1 1 R&D Center, Hyundai Motor Company

More information

Consulting, Engineering & Managed Service Provider

Consulting, Engineering & Managed Service Provider Consulting, Engineering & Managed Service Provider A Joint Venture Company Together Making a difference Introduction Genesis of AeroEuro: A Joint Venture between Punj Lloyd Group, India and GECI, France

More information

industrial & engineering technology

industrial & engineering technology Automotive Construction Engineering Graphics HVAC Horticulture Industrial Electronics Industrial Supervision Machine Tool Mechatronics Welding industrial & engineering technology Automotive Technology

More information

COWLEY COLLEGE COURSES AVAILABLE TO HIGH SCHOOL STUDENTS COVERED BY SB155 _ April 2015

COWLEY COLLEGE COURSES AVAILABLE TO HIGH SCHOOL STUDENTS COVERED BY SB155 _ April 2015 COWLEY COLLEGE COURSES AVAILABLE TO HIGH SCHOOL STUDENTS COVERED BY SB155 _ April 2015 ACCOUNTING Course Name Credit hours ACC 1111 Fundamentals of Accounting 3 ACC 1120 Payroll Accounting 2 ACC 1130 Accounting

More information

Diploma in Electrical Engineering DEE

Diploma in Electrical Engineering DEE Diploma in Electrical Engineering DEE Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design I Electro Magnetic fields Analog

More information

DESIGNING AN EDUCATIONAL CERTIFICATION SYSTEM FOR EUROPEAN PRODUCTION ENGINEERS. Ove Bayard(I), Cornel Mihai Nicolescu(I) and Magnus Areskoug (II)

DESIGNING AN EDUCATIONAL CERTIFICATION SYSTEM FOR EUROPEAN PRODUCTION ENGINEERS. Ove Bayard(I), Cornel Mihai Nicolescu(I) and Magnus Areskoug (II) DESIGNING AN EDUCATIONAL CERTIFICATION SYSTEM FOR EUROPEAN PRODUCTION ENGINEERS Ove Bayard(I), Cornel Mihai Nicolescu(I) and Magnus Areskoug (II) (I) Kungliga Tekniska Högskolan, Dept. of Production Engineering,

More information

Energy Systems Engineering Technician & Technologist Diploma Program (ESET) ESET Program Description

Energy Systems Engineering Technician & Technologist Diploma Program (ESET) ESET Program Description Energy Systems Engineering Technician & Technologist Diploma Program (ESET) 2012 Program Information Guide and Frequently Asked Questions May 2012 ESET Program Description The Energy Systems Engineering

More information

ABOUT X-Y X Y TOOL AND DIE

ABOUT X-Y X Y TOOL AND DIE ABOUT X-Y X Y TOOL AND DIE X-Y Tool And Die has been in business since 1971. Thats when we started producing fixtures, gages, tools, prototype parts and quality machined parts for the manufacturing industry.

More information

ME 521 Computer Aided Design. 1. Introduction to CAD

ME 521 Computer Aided Design. 1. Introduction to CAD Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for

More information

Finite Element Methods (in Solid and Structural Mechanics)

Finite Element Methods (in Solid and Structural Mechanics) CEE570 / CSE 551 Class #1 Finite Element Methods (in Solid and Structural Mechanics) Spring 2014 Prof. Glaucio H. Paulino Donald Biggar Willett Professor of Engineering Department of Civil and Environmental

More information

DESIGN AND MANUFACTURING OF THE INJECTION MOLD FOR METAL-INSERTED RUBBER PARTS USING CAD/CAM/CAE TECHNOLOGIES: A CASE STUDY OF THE ENGINE MOUNTING

DESIGN AND MANUFACTURING OF THE INJECTION MOLD FOR METAL-INSERTED RUBBER PARTS USING CAD/CAM/CAE TECHNOLOGIES: A CASE STUDY OF THE ENGINE MOUNTING Proceedings of IMECE2008 2008 ASME International Mechanical Engineering Congress and Exposition October 31-November 6, 2008, Boston, Massachusetts, USA IMECE2008-66843 ASME International Mechanical Engineering

More information

Implementation of the Movable Photovoltaic Array to Increase Output Power of the Solar Cells

Implementation of the Movable Photovoltaic Array to Increase Output Power of the Solar Cells Implementation of the Movable Photovoltaic Array to Increase Output Power of the Solar Cells Hassan Moghbelli *, Robert Vartanian ** * Texas A&M University, Dept. of Mathematics **Iranian Solar Energy

More information

PLACEMENTS. (A Government of India Society - Ministry of MSME) Faculty. Hostels. Publications TRAINING METHODOLOGY

PLACEMENTS. (A Government of India Society - Ministry of MSME) Faculty. Hostels. Publications TRAINING METHODOLOGY Faculty CITD has availed ILO expert services in various disciplines. About 25 faculty members back by vast experience and trained in Advanced Tooling Techniques under ILO fellowship, impart training to

More information

UNDERGRADUATE DEGREE PROGRAMME IN ELECTRICAL ENGINEERING. School of Industrial Engineering, Albacete

UNDERGRADUATE DEGREE PROGRAMME IN ELECTRICAL ENGINEERING. School of Industrial Engineering, Albacete UNDERGRADUATE DEGREE PROGRAMME IN ELECTRICAL ENGINEERING School of Industrial Engineering, Albacete Higher Technical School of Industrial Engineering, Ciudad Real Polytechnic University School, Almadén

More information

Darren C. Olson. Central Washington University Department of Engineering Technologies, Safety & Construction

Darren C. Olson. Central Washington University Department of Engineering Technologies, Safety & Construction Darren C. Olson EDUCATION Indiana State University Ph.D. in Technology Management, May 2004 Quality Systems Specialization Bowling Green State University M.Ed. in Career and Technology Education, May 1997

More information

Automotive Manufacturing Technology

Automotive Manufacturing Technology 76 Location: Patterson Campus - Bldg. Q Program Information is a rapidly growing career in one of Alabama s highest-growth industries, automotive manufacturing. With high demand for skilled workers in

More information

CATALOG CHANGES - F13. The Department of Ocean and Mechanical Engineering offers programs of study leading to the following degrees:

CATALOG CHANGES - F13. The Department of Ocean and Mechanical Engineering offers programs of study leading to the following degrees: CATALOG CHANGES - F13 Ocean and Mechanical Engineering Department: The following changes are necessary to update the catalog. The first change is to include the combined BSME to MS degree program in the

More information

Integrated Dual Degree B. Tech. + M. Tech. / MBA - I Semester S. No. Subject Code Name of Subject L-T-P Credits Theory Subjects 3-1-0 4

Integrated Dual Degree B. Tech. + M. Tech. / MBA - I Semester S. No. Subject Code Name of Subject L-T-P Credits Theory Subjects 3-1-0 4 Integrated Dual Degree B. Tech. + M. Tech. / MBA - I Semester 1 PH 102 / Engineering Physics / CY 101 Engineering Chemistry 2 MA 101 Mathematics I 3 CE 101 Engineering Mechanics 2-1-0 3 4 CS 101 Computer

More information

Precision Manufacturing Program

Precision Manufacturing Program Precision Manufacturing Program Conventional Precision Manufacturing (CPM) Certificate Program During this program, students learn about subjects that form a solid foundation for a career in manufacturing.

More information

Mechanical Engineering Graduate Program

Mechanical Engineering Graduate Program Student Handbook Mechanical Engineering Graduate Program Page 2 University of Michigan - Dearborn Table of Contents Program Overview 4 Degree Requirements 4 Grading System 5 Drops and Unofficial Drops

More information

Curriculum Vitae Nouby Mahdy Ghazaly, Ph.D.

Curriculum Vitae Nouby Mahdy Ghazaly, Ph.D. Contact details: Automotive and Tractor Engineering Dept. College of Engineering, Minia University El-Minia - 61111 Egypt Nationality: Egyptian Curriculum Vitae Nouby Mahdy Ghazaly, Ph.D. Mobile No.: +201128930300

More information

Online Design Training

Online Design Training Online Design Training PowerPoint Template www.themeart.com Abaqus Course Content Course Objective To empower the participants with confidence and skill to knock the door of real world! Online Training

More information

GRADUATE STUDENT HANDBOOK

GRADUATE STUDENT HANDBOOK GRADUATE STUDENT HANDBOOK Department of Mechanical Engineering The University of South Carolina May 2016 1 MECHANICAL ENGINEERING GRADUATE STUDENT HANDBOOK TABLE OF CONTENTS Page PART I. GENERAL INFORMATION

More information

ELECTRICAL ENGINEERING DEGREE. List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO

ELECTRICAL ENGINEERING DEGREE. List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO ELECTRICAL ENGINEERING DEGREE List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO 1 Degree: Site: (V12G320V01) Bachelor's Degree in Electrical

More information

Manufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS

Manufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS Manufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS Catalog Description: The Manufacturing Technology program provides training in a wide variety of skill areas of product

More information

MASTER DEGREE PROJECT

MASTER DEGREE PROJECT MASTER DEGREE PROJECT Finite Element Analysis of a Washing Machine Cylinder Thesis in Applied Mechanics one year Master Degree Program Performed : Spring term, 2010 Level Author Supervisor s Examiner :

More information

Professional Biographical Outline Andrew J. Rentschler, Ph.D.

Professional Biographical Outline Andrew J. Rentschler, Ph.D. Professional Biographical Outline Andrew J. Rentschler, Ph.D. Background During his Ph.D. dissertation, Dr. Rentschler was involved in the development and analysis of an autonomous robotic walker. Dr.

More information

SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS

SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS SOLIDWORKS CAD Software Course Index Course Number Course Title Course Length 100 SOLIDWORKS

More information

Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu

Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu COURSE DESCRIPTION: The course outlines modern solid modeling design, analysis, simulation, and manufacturing of mechanical

More information

340 Skilled Trades Technologies. Associate of Applied Science Degree

340 Skilled Trades Technologies. Associate of Applied Science Degree 340 Associate of Applied Science Degree Building Maintenance Major...242 Construction Trades Major...345 Electrical Major...346 Mechanical Major...348 Certificates Building Maintenance...343 Electrical...347

More information

Arch - Broadcast - Business - Computer - Culinary - Engineer ARCHITECTURAL ENGINEERING DRAWING & DESIGN

Arch - Broadcast - Business - Computer - Culinary - Engineer ARCHITECTURAL ENGINEERING DRAWING & DESIGN Arch - Broadcast - Business - Computer - Culinary - Engineer ARCHITECTURAL ENGINEERING DRAWING & DESIGN The purpose of these courses is to explore all aspects of drafting from basic fundamentals and basic

More information

Industrial Design Technology

Industrial Design Technology INFORMATION & APPLICATION GUIDE Industrial Design Technology Associate of Applied Science in Industrial Design Technology Certificate of Completion in Industrial Design Technology: SolidWorks Design Specialist

More information

Student Handbook Manufacturing Technology Program (MTP)-AS

Student Handbook Manufacturing Technology Program (MTP)-AS Royal Commission Yanbu Colleges and Institutes (RCYCI) Yanbu Industrial College (YIC) Department of Mechanical Engineering Technology (MET) Student Handbook Manufacturing Technology Program (MTP)-AS Student

More information

Engineering Problem Solving as Model Building

Engineering Problem Solving as Model Building Engineering Problem Solving as Model Building Part 1. How professors think about problem solving. Part 2. Mech2 and Brain-Full Crisis Part 1 How experts think about problem solving When we solve a problem

More information

How To Make A Lightweight Car

How To Make A Lightweight Car Lightweight solutions Multi-material constructions Flanders DRIVE Index: Flanders DRIVE 1 Need for cost-efficient lightweight solutions 2 Multi-material constructions as a valuable solution 3 Our expertise

More information

LIST OF STANDARDIZED COURSES

LIST OF STANDARDIZED COURSES LIST OF STANDARDIZED COURSES 1.List Of Entrepreneurship Development Programmes, Entrepreneurship Cum Skill Development Programmes & Training Of Trainers Programmes S.No. EDPs 1. CRR Scheme for CPSUs 2.

More information

Free Examples of plant layout drawing

Free Examples of plant layout drawing Free layout examples; a wide variety of industrial layouts, within different facility types. Principles of plant layout and design will apply widely. Free Examples of plant layout drawing Principles of

More information

Mechanical and Aerospace Engineering Graduate Program. Graduate Student Handbook. Academic Year 2013-2014

Mechanical and Aerospace Engineering Graduate Program. Graduate Student Handbook. Academic Year 2013-2014 Mechanical and Aerospace Engineering Graduate Program Graduate Student Handbook Academic Year 2013-2014 Mechanical and Aerospace Engineering Graduate Program School for Engineering of Matter, Transport

More information

Program of Study - Mechanical Engineering Technology Monroe County Community College. Overview What is Mechanical Engineering Technology?

Program of Study - Mechanical Engineering Technology Monroe County Community College. Overview What is Mechanical Engineering Technology? Martin Dubois, Assistant Professor of Mechanical Engineering Technology Thomas Harrill, Assistant Professor of Electronics and Computer Technology Jill Denko, Assistant Professor of Student Services James

More information

Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim

Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim Joel Tollefson Imagine Inc. Aerospace Business Development Hans Van den Wijngaert LMS Product Manager Motion

More information

Estimation of Work Hardening in Bent Sheet Metal Products at an Early Stage of Virtual Product Development

Estimation of Work Hardening in Bent Sheet Metal Products at an Early Stage of Virtual Product Development Estimation of Work Hardening in Bent Sheet Metal Products at an Early Stage of Virtual Product Development RokneddinAzizi HosseinAmiryousefi Department of Mechanical Engineering Blekinge Institute of Technology

More information

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS CNC MILLING MET 2700

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS CNC MILLING MET 2700 PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS CNC MILLING MET 2700 Class Hours:.0 Credit Hours: 4.0 Laboratory Hours: 0.0 Revised: Fall 2015 Catalog Course Description: CNC Milling is a state-of-the-art

More information

GEORGIAN COLLEGE. Mechanical Engineering Technology Automotive Products Design

GEORGIAN COLLEGE. Mechanical Engineering Technology Automotive Products Design Courses Required Mandatory GEORGIAN COLLEGE Mechanical Engineering Technology Automotive Products Design ADPE2000 Product Design Fundamentals ADPE2001 Virtual Prototyping ADPE3000 Advanced Product Design

More information

Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges.

Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges. Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges. Roger A. Assaker Roger.Assaker@e-Xstream.com www.e-xstream.com Short Abstract Computer Aided Engineering

More information

MSC PROGRAMME IN MECHANICAL ENGINEERING

MSC PROGRAMME IN MECHANICAL ENGINEERING Mechanical Engineering MSC PROGRAMME IN MECHANICAL ENGINEERING Prof Mikael Enelund, Head of ME Program Best Swedish engineering education 2012 by Teknikföretagen (Employer s organisation) Centre of Excellent

More information

MASTER OF ENGINEERING Mechanical Engineering Program

MASTER OF ENGINEERING Mechanical Engineering Program MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.

More information

Methods to predict fatigue in CubeSat structures and mechanisms

Methods to predict fatigue in CubeSat structures and mechanisms Methods to predict fatigue in CubeSat structures and mechanisms By Walter Holemans (PSC), Floyd Azure (PSC) and Ryan Hevner (PSC) Page 1 Outline Problem Statement What is fatigue? Cyclic loading and strength

More information

ME 521 Computer Aided Design. 2. Computer Aided Design and Production Process

ME 521 Computer Aided Design. 2. Computer Aided Design and Production Process Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Design 2 Integrating The Design and Manufacturing Process Through a Common Datase

More information

INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS

INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS Tom Kimerling University of Massachusetts, Amherst MIE 605 Finite Element Analysis Spring 2002 ABSTRACT A FEA transient thermal structural

More information

Computer Aided Design and Drafting (CAD)

Computer Aided Design and Drafting (CAD) Oakland Community College 2015-2016 Catalog 1 Computer Aided Design and Drafting (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well as

More information

TEC 327 Electronic Devices Lab (1) Corequisite: TEC 326. Three hours lab per week. Experiments involving basic electronic devices.

TEC 327 Electronic Devices Lab (1) Corequisite: TEC 326. Three hours lab per week. Experiments involving basic electronic devices. TEC 201 Microcomputers Applications and Techniques (3) Two hours lecture and two hours lab per week. An introduction to microcomputer hardware and applications of the microcomputer in industry. Hands-on

More information

Teaching and Related Experience

Teaching and Related Experience Emese Kennedy May 2015 (Expected) Dec. 2013 May 2010 2013 present 2013 present Education Ph.D. Candidate, Applied Mathematics, North Carolina State University, Advisor: Dr. Hien Tran Dissertation Title:

More information

University of Nevada, Reno, Mechanical Engineering Department. 2005 ABET Program Outcome and Assessment

University of Nevada, Reno, Mechanical Engineering Department. 2005 ABET Program Outcome and Assessment 2005 ABET Program Outcome and Assessment 3. Program Outcomes and Assessment Program Outcomes We define our program educational outcomes as statements that describe what students are expected to be able

More information

Materials Science and Engineering, National Dong Hwa University Degree requirements for the PhD program Approved on March 18, 2014

Materials Science and Engineering, National Dong Hwa University Degree requirements for the PhD program Approved on March 18, 2014 Materials Science and Engineering, National Dong Hwa University Degree requirements for the PhD program Approved on March 18, 2014 I. Legal foundation These requirements have been formulated in accordance

More information

294 School of Technology. Associate of Applied Science Degree

294 School of Technology. Associate of Applied Science Degree 294 Associate of Applied Science Degree Design Technologies...296 Architectural Engineering Technology...297 Architectural CAD Operator Certificate...298 Construction Inspector Certificate...298 CAD Technology...299

More information

Hybrid Modeling and Control of a Power Plant using State Flow Technique with Application

Hybrid Modeling and Control of a Power Plant using State Flow Technique with Application Hybrid Modeling and Control of a Power Plant using State Flow Technique with Application Marwa M. Abdulmoneim 1, Magdy A. S. Aboelela 2, Hassen T. Dorrah 3 1 Master Degree Student, Cairo University, Faculty

More information

PREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL

PREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL PREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL P. Kolar, T. Holkup Research Center for Manufacturing Technology, Faculty of Mechanical Engineering, CTU in Prague, Czech

More information

CURRICULUM VITAE Herbert L. Dershem

CURRICULUM VITAE Herbert L. Dershem CURRICULUM VITAE Visiting Professor of Computer Science United States Air Force Academy USAF Academy, CO 80840 Phone: (719) 472-3590 Education: B.S. University of Dayton, 1965 M.S. (Computer Science) Purdue

More information

COMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS

COMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 7, Issue 2, March-April 2016, pp. 30 52, Article ID: IJARET_07_02_004 Available online at http://www.iaeme.com/ijaret/issues.asp?jtype=ijaret&vtype=7&itype=2

More information

Spring 2015 Class Schedule

Spring 2015 Class Schedule Spring 2015 Class Schedule Check Class Offerings in MyMSTC or Classfinder for Changes and Additions to the Spring 2015 Class Schedule Wisconsin Rapids Campus Offerings... 1-18 Stevens Point Campus Offerings...

More information

Education & Training Plan Renewable Energy Specialist Online

Education & Training Plan Renewable Energy Specialist Online Education & Training Plan Renewable Energy Specialist Online MyCAA Information Tuition: $3600 (1 exam included for LEED) MyCAA Course Code: LIT-RES3 Course Contact Hours: 365 Hours Program Duration: 6

More information

CAD-CAM Application in CNC Machining with Solid & Surface Modelling

CAD-CAM Application in CNC Machining with Solid & Surface Modelling Short Term Course On CAD-CAM Application in CNC Machining with Solid & Surface Modelling ( February 22 26, 2016) Venue: CNC Room, CWISS Organized by Central Workshop & Instruments Service Section Indian

More information

Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified)

Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) 272 School of Engiineering Contact: The Dean, School of Engineering Moi University P.O. Box 3900 30100, Eldoret, Kenya Tel: (053) 43170;

More information

Ohio Renewable Energy TAG Creation

Ohio Renewable Energy TAG Creation Ohio Renewable Energy TAG Creation as a result of An Innovative Model for a new Advanced Energy Workforce National Science Foundation Partnership for Innovation Program (0917981) PI: Dr. Frank Calzonetti

More information

Biomedical engineering

Biomedical engineering SAMARA STATE AEROSPACE UNIVERSITY Biomedical engineering Educational program 01.01.2014 Biomedical systems and biotechnology (Biomedical engineering) Undergraduate (Bachelor program) Undergraduate 4 years

More information

Qualification of Auditor and Lead Auditor to perform an assessment according NSQ-100

Qualification of Auditor and Lead Auditor to perform an assessment according NSQ-100 Page 1 / 11 ABSTRACT Qualification of Auditor and Lead Auditor to CONTENTS 0. GENERAL... 2 0.1. Purpose... 2 0.2. Scope of application... 2 0.3. References... 2 0.4. Terminology... 2 1. SECTIONS... 2 1.1.

More information

Impact Testing Systems

Impact Testing Systems The more intelligent solution... Impact Testing Systems The more intelligent solution... Tronjestraße 8, 44219 Dortmund Tel.: +49 231 912980 0 Fax.: +49 231 179855 www.coesfeld.com mail@coesfeld.com Introduction

More information

Introducing. International Simulation Engineer

Introducing. International Simulation Engineer Introducing International Simulation Engineer The ISE (International Simulation Engineer) qualification allows engineers and analysts within the international simulation community to demonstrate and record

More information

Engineering Problem Solving

Engineering Problem Solving Engineering Problem Solving 1 Engineering in the 21st Century What is engineering about? According to Webster s 9th New Collegiate Dictionary,... the application of science and mathematics by which the

More information

Der Einfluss thermophysikalischer Daten auf die numerische Simulation von Gießprozessen

Der Einfluss thermophysikalischer Daten auf die numerische Simulation von Gießprozessen Der Einfluss thermophysikalischer Daten auf die numerische Simulation von Gießprozessen Tagung des Arbeitskreises Thermophysik, 4. 5.3.2010 Karlsruhe, Deutschland E. Kaschnitz Österreichisches Gießerei-Institut

More information

BASIC ELECTRONICS MANUFACTURING & MATERIALS TECHNOLOGY

BASIC ELECTRONICS MANUFACTURING & MATERIALS TECHNOLOGY Edmonds Community College 20000 68th Ave W Lynnwood, WA 98036 BASIC ELECTRONICS This certificate is awarded after satisfactory completion of the first year requirement of the Associate of Technical Arts

More information

The PTC Creo Suite of NC and Tooling Solutions

The PTC Creo Suite of NC and Tooling Solutions The PTC Creo Suite What you need to capitalize on global manufacturing excellence of NC and Tooling Solutions To gain a competitive edge in product development, companies are increasingly leveraging globally

More information

CURRICULUM VITAE. Degree Branch University Graduation Year BSc. Industrial Engineering Çankaya University 2004

CURRICULUM VITAE. Degree Branch University Graduation Year BSc. Industrial Engineering Çankaya University 2004 ÇİĞDEM DİNÇKAL (PhD) CURRICULUM VITAE Academic Title: Assistant Professor. Work Address: Çankaya University, Department of Civil Engineering, N-A09, Yukarıyurtcu Mahallesi Mimar Sinan Caddesi No:4, 06790,

More information

Engineering. at Cuyahoga Community College. www.tri-c.edu. Cuyahoga Community College

Engineering. at Cuyahoga Community College. www.tri-c.edu. Cuyahoga Community College Engineering Contact Information: 216-987-4104 Website: www.tri-c.edu/engineering Booklet design by: Meredith Bard; Senior in Tri-C s Graphic Design Program Photos by: Rachael Rieke; Senior in Tri-C s Graphic

More information

DIABLO VALLEY COLLEGE CATALOG 2014-2015

DIABLO VALLEY COLLEGE CATALOG 2014-2015 ENGINEERING ENGIN Tish Young, Dean Physical Sciences and Engineering Division Physical Sciences Building, Room 263 Possible career opportunities The engineering transfer program prepares students to enter

More information

NORTHFIELD METAL PRODUCTS

NORTHFIELD METAL PRODUCTS NORTHFIELD METAL PRODUCTS CUSTOM METAL & PLASTIC COMPONENT MANUFACTURING SINCE 1974 PROGRESS through engineering & design WHO WE ARE Northfield Metal Products, located in Waterloo Ontario Canada, has been

More information

ADVANCED DESIGN APPLICATIONS. Course Overview. 36 Weeks. REVIEW PART 1: Brainstorming and Engineering Journal (1 class period)

ADVANCED DESIGN APPLICATIONS. Course Overview. 36 Weeks. REVIEW PART 1: Brainstorming and Engineering Journal (1 class period) ADVANCED DESIGN APPLICATIONS Course Overview 36 Weeks REVIEW: TECHNOLOGY AND ENGINEERING REVIEW (9 Class Periods) REVIEW PART 1: Brainstorming and Engineering Journal (1 class period) Purpose: The purpose

More information

FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS

FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS With Mathematica and MATLAB Computations M. ASGHAR BHATTI WILEY JOHN WILEY & SONS, INC. CONTENTS OF THE BOOK WEB SITE PREFACE xi xiii 1 FINITE ELEMENT

More information

Last update: January 2009 Doc.: 08A05203_e

Last update: January 2009 Doc.: 08A05203_e Last update: January 2009 Doc.: 08A05203_e Organic Rankine Cycle (ORC) modules ORC is a commercial technology for distributed production of combined heat and power from various energy sources. TURBODEN

More information

Sukkur Institute of Business Administration Merit-Quality-Excellence COURSE SCHEMA. For. Admission in. Page 1 of 7

Sukkur Institute of Business Administration Merit-Quality-Excellence COURSE SCHEMA. For. Admission in. Page 1 of 7 Sukkur Institute of Business Administration Merit-Quality-Excellence COURSE SCHEMA For Admission in MS (Applied Mathematics and Computational Finance) Spring-2014 Page 1 of 7 MS (Applied Mathematics and

More information

Application of Web-Based Bar Fatigue Database. Database Development

Application of Web-Based Bar Fatigue Database. Database Development Application of Web-Based Bar Fatigue Database Database Development Thomas G. Oakwood Bar Steel Fatigue Database- Objectives Develop a strain-controlled fatigue database for carbon and low alloy bar steels

More information

Application of ANSYS in the Simulation of IEC Type Tests Applied to Low and Medium Voltage Switchboards

Application of ANSYS in the Simulation of IEC Type Tests Applied to Low and Medium Voltage Switchboards Application of ANSYS in the Simulation of IEC Type Tests Applied to Low and Medium Voltage Switchboards MSO INDUSTRIAL Soluciones Avanzadas de Ingeniería MSO Industrial offers Specialized technical advice

More information

GENERAL PROPERTIES //////////////////////////////////////////////////////

GENERAL PROPERTIES ////////////////////////////////////////////////////// ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,

More information

Department of Mechanical Engineering

Department of Mechanical Engineering Department of Mechanical Engineering ADMINISTRATIVE OFFICER Jianren Zhou, Interim Department Head, Mechanical Engineering FACULTY Paul O. Biney, Mechanical Engineering Ronald D. Boyd, Mechanical Engineering

More information