CURRICULUM VITAE. Main Interests: Education: Experiences in academia: : 25 September 1951, Izmir, Turkey. : Kirikkale University,

Transcription

1 CURRICULUM VITAE Name Affiliation Birth date Marital status Address : Ali ERISEN : Prof. Dr. : 25 September 1951, : Married and has two children :, Muhendislik Fakultesi 71451, Yahsihan, GSM: +90 (535) Phone: +90 (318) / 1056 Fax: +90 (318) alierisen@hotmail.com, alierisen@yahoo.com Web: Web: Main Interests: General Areas: Thermodynamics, Nuclear Engineering, Energy Conversion Systems, Thermo-Fluid, Engineering Mathematics Special topics: Heating, Refrigeration and Air Conditioning Finite Elements Method Hybrid Blanket Design Education: Degree University Department Year Ph.D. Ege University, Department of Mechanical Engineering 1978 M.Sc. Ege University, Department of Mechanical Engineering 1974 B.Sc. Ege University, Department of Mechanical Engineering 1972 Experiences in academia:

2 Position University Year Professor Associate Professor Associate Professor Assistant Professor Assistant Professor Research / Teaching Assistant Visiting Scientist Research / Teaching Assistant Dokuz Eylul University Ege University MIT Plasma Fusion Center Boston, USA State Academiy for Engineering and Architecture Eskisehir, Turkey 1994 current Experiences in administrative duties: Position University Year Head of Department of Mechanical Engineering Associate Dean of Executive Member of Faculty Board Executive Member of Faculty Board

3 Executive Member of University Board Head of Graduate Program Associate Dean of Head of Energy Division Head of Department of Mechanical Engineering Associate Head of Graduate Program Executive Member of Faculty Board Associate Dean of Executive Member of Institute Board Executive Member of Faculty Board Laboratory Coordinator Institute of Physical Sciences Institute of Physical Sciences Ege University Institute of Nuclear Sciences Dokuz Eylul University Buca Faculty of Education Ege University Faculty of Engineering Sciences Other professional experiences: 1. Member of Editorial Board: Mathematical & Computational Applications, Published by Association for Scientific Research, Turkey 2. Member of Editorial Board: current Journal of the Institute of Physical Sciences, Erzincan University, Turkey 3. Member of Project Review Board: current TUBITAK, The Scientific and Technological Research Council of Turkey 4. Board Member for Academic Entitlement and Assignment to Assistant 1994 current Professorship, Associate Professorship, and Professorship: YOK, The Council of Higher Education of Turkey 5. Executive member of BOREN,

4 2013 National Boron Research Instute, Turkey Engineering software packages used: Ansys, Fluent (Introductory level) Reviewer: Journal of Engineering Sciences, Pamukkale University, Turkey, 2004 Journal of the Institute of Science and Technology,, Turkey, 2003 Memberships: TMMOB-MMO, Chamber of Mechanical Engineers, Turkey Awards / Supports: Financial support for participating in the researches as visiting scientist at MIT, Plasma Fusion Center, Boston, USA Courses taught: Undergraduate courses: 1. Calculus 2. Differential Equations 3. Advanced Mathematics 4. Finite Elements Method 5. Thermodynamics 6. Gas Dynamics 7. Heating. Refrigeration and Air Conditioning 8. Mechanical Laboratory I (Heating, Refrigeration and Air Conditioning) 9. Mechanical Laboratory II (Thermodynamics) 10. Semester Project in Mechanical Engineering 11. Graduation Project Graduate courses: 1. Advanced Engineering Mathematics 2. Advanced Thermodynamics 3. Fundamentals of Nuclear Engineering 4. Energy Conversion Systems

5 Some of the supervised undergraduate projects: 1. Design of air conditioning system 2. Design of domestic heating system 3. Design of refrigeration unit 4. Design of solar energy systems 5. Design of wind energy systems Supervised Ph.D. Thesis: 1. Arslan, M., Development of an Image Processing Tool for Non-Destructive Material Testing by Infrared Thermography,,, Kirikkale, Turkey, expected Cekel, N., Thermal Analysis of Fin with Temperature Dependent Heat Conduction Coefficient,,,, expected Ayata, T., Neutronic Performance and Thermo-Hydraulic Analysis of Hybrid Reactors with Light Water (H2O) and Heavy Water (D2O) Coolant,, Department of Mechanical Engineering,, Arcaklioglu, E., Thermodynamic Analysis of R12, R22, R502 Refrigerant Fluids and Their Alternative Mixtures in Refrigeration Systems,, Department of Mechanical Engineering,, Gul, H., Experimental Investigation with the Second Law of Thermodynamics of Heat Transfer in Pipes Having an Injected Spinning Water Flow at the Entrance,, Department of Mechanical Engineering,, Ipek, O., Neutronic Analysis of Geometrical and Material Parameters for D-T Driven Hybrid Blankets,,,, Kocak, S., Neutron-Physics Analysis of Hybrid Blankets Having Flattened Power Production and Fueled with ThO2+CmO2 Mixture,,,, Supervised M.Sc. Thesis: 1. Arslan, E., Vacuumed medium investigation for drying clothes,,,, Terzi, S. O., Recovering of wasted steam in the production of gas concrete (autoclaved aerated concrete) by thermocomressor,,,, Senol, S., Design and Manufacturing of Testing Device to Determine Pipe Roughness, Kirikkale University,,, Arslan, M., Internet-Based Remote Temperature Control System,,,, 2005.

6 5. Terlemezoglu, N., Investigation of Laminar Natural Convection over a Vertical Plate Using Finite Difference Method,,, Kirikkale, Turkey, Celen, F., Exergy Analysis in a Dry Rotary Burner with Pre-Calcinations in Cement Production Process in Bastas Company,,,, Yilmaz, R., Experimental Investigation of Performance Characteristics of Vapor Compression Refrigeration Units Using Refrigerant Mixture of R12-R22,, Department of Mechanical Engineering,, Arcaklioglu, E., Exergy Analysis of Performance of Refrigeration Unit Working with a Mixture of Propane-Isobutene by Utilizing Equation of State,, Department of Mechanical Engineering,, Ayata, T., Computer-Aided Thermal Design of Buildings by Utilizing Graphical Input, Kirikkale University,,, Kelek, N., Design of Optimum Solar Air Collector,, Department of Mechanical Engineering,, Kaya, M., Investigation of Refrigeration Plant Performance Criteria with Respect to Temperature Variation of Evaporator, Condenser and Environment,,,, Dogan, A., Investigation and Optimal Design of Heat Exchangers by Utilizing the Second Law of Thermodynamics,,,, Akansu, S., Design of Supersonic Wind Tunnel Facility for Normal Shock Waves, Erciyes University,,, Onal, S., Exergy Analysis of Combustion Efficiency for Steam Boilers,,,, Saygi, H., Design of Supersonic Flow Nozzle,, Department of Mechanical Engineering,, Ozcekic, M., Availability Analysis Aided Redesign of Steam Distribution System of Paper Drying Cylinders in Package-Paper Production Plant,, Department of Mechanical Engineering,, Ocal, C., Numerical Computation of Nuclear Explosive Critical Masses for Various Reflector and Fuel Combinations and Computation of Neutron Physics Parameters in these Combinations,,,, Unalan, S., Computer-Aided Analysis of Optimum Storage Criteria in Thermal Heat Storage Unit Having Increased Inlet Temperature with Heat Pump,, Department of Mechanical Engineering,, PUBLICATIONS Thesis: 1. Erisen, A., 1978, Controlling the Thermionic Space Reactors with U-233 as Nuclear Fuel and ZrH1.7 as Moderator by the Boron Reflector Drums, Ph.D. Thesis,, Ege University, 2. Erisen, A., 1974, Analysis of Hydrokinetic Torque Converters by using System Modeling, M.Sc.

7 Thesis,, Ege University, Journal papers: 1. Arcaklioglu, E., Cavusoglu, A., and Erisen, A., 2006, Thermodynamic Analysis of Refrigerant Mixtures for Possible Replacements for CFCs by an Algorithm Compiling Property Data, Applied Thermal Engineering, Vol. 26, No: 4, pp (Times cited: 2) 2. Arcaklioglu, E., Cavusoglu, A., and Erisen, A., 2005, An Algorithmic Approach towards Finding Better Refrigerant Substitutes of CFCs in Terms of the Second Law of Thermodynamics, Energy Conversion and Management, Vol. 46, No: 9-10, pp (Times cited: 2) 3. Sozen, A., Arcaklioglu, E., Erisen, A., and Akcayol, M. A., 2004, Performance Prediction of a Vapour-Compression Heat-Pump, Applied Energy, Vol. 79, No: 3, pp (Times cited: 2) 4. Arcaklioglu, E., Erisen, A., and Yilmaz, R., 2004, Artificial Neural Network Analysis of Heat Pumps Using Refrigerant Mixtures, Energy Conversion and Management, Vol. 45, No: 11-12, pp (Times cited: 11) 5. Arcaklioglu, E., Cavusoglu, A., and Erisen, A., 2004, Thermodynamic Analysis of Refrigerant Mixtures Using Artificial Neural Networks, Applied Energy, Vol. 78, No: 2, pp (Times cited: 8) 6. Camdali, U., Erisen, A., and Celen, M., 2004, Energy and Exergy Analyses in a Rotary Burner with Pre-Calcinations in Cement Production, Energy Conversion and Management, Vol. 45, No: 18-19, pp (Times cited: 4) 7. Unalan, S., Ayata, T., Akansu, S. O., Erisen, A., and Bolukbasi, A., 2003, Light and Heavy Water Cooled Hybrid Reactors for Rejuvenation of LWR Spent Fuels, Energy Conversion and Management, Vol. 44, No: 16, pp (Times cited: 5) 8. Yapici, H., Ipek, O., Ozceylan, V., and Erisen, A., 2000, Analysis of the Rejuvenation Performance of Hybrid Blankets by Using Uranium Fuels (UN, UC, UO2, U3Si2) and Different Coolants for Various Volume Fraction, Annals of Nuclear Energy, Vol. 27, No: 4, pp (Times cited: 17) 9. Sahin, S., Erisen, A., and Cebi, Y., 1989, Realization of a Flat Fission Power-Density in a Hybrid Blanket over Long Operation Periods, Fusion Technology, Vol. 15, No. 1, pp (Times cited: 20) 10. Sahin, S., Erisen, A., Selvi, S., and Yalcin, S., 1980, Investigation of the Protection Possibilities Against Enhanced Radiation Warhead, Atomkernenergie-Kerntechnik, Vol. 35, No. 3, pp (Times cited: 11) 11. Sahin, S., and Erisen, A., 1978, Investigation of the Suitability of the Reflector Drums as Control Mechanism for Thermionic Reactors in Space Crafts with U-233 as Fuel and ZrH1.7 as Moderator, Annals of Nuclear Energy, Vol. 5, No: 3-4, pp Sahin, S., Erisen, A., Selvi, S., and Yalcin, S., 1979, Reflector Drums as Control Mechanism for Compact Thermionic SpaceCraft Reactors with U-233 as Fuel, Nuclear Energy-Journal of The British Nuclear Energy Society, Vol. 18, No: 6, pp (Times cited: 4) International conference papers: 1. Arslan, M., and Erisen, A., 2010, Temperature distribution and non-destructive testing of a damaged material via infrared thermography and image processing technics, 6th International Science and Technology Conference-2010 Proceedings Book, pp , Turkish Republic of Northern Cyprus 2. Arslan, M., and Erisen, A., 2006, Basic Problems and Solution Proposals in Web-Based Laboratories used in Distance Education, 6th International Educational Technology Conference (IETC2006), Vol. 1,

8 pp , April 2006, Famagusta/North Cyprus 3. Ayata, T., Erisen, A., and Cavusoglu, A., 2006, Obtaining Irregular Flat Temperature Distribution at One Face of Thin Cylindrical Plates in the Case of Irregularly Heated Opposite Face Using Finite Element Analysis, 9 th International Combustion Symposium,, pp , November 16-17, Arslan M., and Erisen A., 2005, Internet-Based Temperature Control System, International Congress on Information Technology in Agriculture, Food and Environment (ITAFE05), pp , October 2005, Adana, Turkey 5. Arslan, M., and Erisen, A., 2005, Virtual Laboratories in Distance Engineering Education and Remote Access Virtual Laboratory Samples Designed by Developed Model with Application: E-Control Laboratory and Remote Access Thermodynamics Laboratory", Fifth International Educational Technology Conference (IETC 2005), September 2005, Sakarya, Turkey 6. Uzun, I., and Erisen, A., 1997, Laminar Forced Convection Heat Transfer of a Non-Newtonian Fluid in Arbitrary Cross-Sectional Ducts, ICHMT, International Symposium on Advances in Computational Heat Transfer, Cesme, Turkey, May Ipek, O., and Erisen, A., 1996, Importance of the Hybrid Reactor System in Terms of Safety, Environment, Waste Recycling and Energy Production, Proceeding of The First Trabzon International Energy and Environment Symposium, Karadeniz Technical University, Trabzon Turkey, pp , July Ipek, O., and Erisen, A., 1995, Hybrid-Blanket System, The Second International Conference on New Energy Systems and Conversion, pp , 31 July 3 August Ipek, O., and Erisen, A., 1995, The Effect of Fission and Nuclear Energy Production Systems on the Energy Usage and Environmental Aspects, 10 th International Thermal Science and Technology Congress, Ankara, 6-8 September Sahin, S., Erisen, A., and Cebi, Y., 1987, A 244CmO2/nat.-UO2 Hybrid Blanket with Flat Fission Power Production, Transactions, American Nuclear Society, Vol. 57, pp Erisen, A., 1987, Design Calculations of A Cylindrical D-T Driven UO2 Hybrid Blanket, 8th Miami International Conference on Alternative Energy Sources, December 1987, Miami Beach, Florida, Vol. 2, pp Sahin, S., Erisen, A., and Cebi, Y., 1987, A Fast Hybrid Blanket with Flat Fission Power Over a Long Operational Period, Transactions, American Nuclear Society, Vol. 54, pp Sahin, S., Erisen, A., Selvi, S., and Yalcin, S., 1980, Limited Protection Against Enhanced Radiation Warhead, Abstract in Helvetica, Physica Acta, Vol. 52, No. 3, pp. 394, (Reunion de Printemps de la Societe Suisse de Physique, Basel, 5-6 April 1979) National journal papers: 1. Arslan, M., Atabas, I, Erisen, A., and Uzun, I., 2008, Impact of Internet on System Performance in Web- Based Control Applications, Automation Journal, Volume: 150, pp , March 2008, Alternative Publishing, ISSN: , Turkey. 2. Arslan, M., Atabas, I, and Erisen, A., 2007, Internet-Originated Basic Problems and Their Solution Suggestions for Web-Based Control Applications, Automation Journal, Volume: 129, pp , October 2007, Alternative Publishing, ISSN: , Turkey. 3. Arcaklioglu, E., and Erisen, A., 2003, Thermodynamics Analysis of Vapor Compression Refrigeration System Using Refrigerant Mixtures", Journal of Engineering Science, Volume 9, No:2

9 4. Arcaklioglu, E., and Erisen, A., 2002, Exergy Analysis of Vapor Compression Refrigeration System Using a Refrigerants R12, R22, R502 and Alternative Mixture of Them", Technology, Issue 3-4, pp Kocak, S., and Erisen, A., 2002, Neutron Analysis of Hybrid Blankets with Flattened Power Production and ThO2+CmO2 Nuclear Fuel Mixture, Dokuz Eylul University,, Journal of Science and Engineering, Volume 4, No: 3, pp Camdalı, U., Celen, F., and Erisen, A., 2000, Thermodynamics Analyses of a Dry System Rotary Burner with Pre-Calcinations in Cement Production, Journal of Thermodynamics, Vol. 157, pp Ipek, O., and Erisen, A., 1995, Effects of Using Be and Pb as Neutron Multiplier on Neutronic Performance of Hybrid Blankets with UO2 Nuclear Fuel and C Reflector", Journal of Mechanical Engineering, Suleyman Demirel University, Faculty of Engineering and Architecture, Isparta, pp Erisen, A., Ipek, O., Ocal, C., and Kocak, S., 1993, Neutron-Physics Analysis of a Plutonium Based Nuclear Fuel Medium in Terms of Critical Mass and Reflector Effectiveness", Isparta, Mechanical Engineering Journal, Vol. 7 National conference papers: 1. Çetin, M., Erisen, A., Tanndıroğlu, A., Artificial drying of fresh hazelnuts in the rotating horizontal cylindirical dryers, 17 th National Thermal Science and Technology Congress, June, 2009, Sivas. 2. Arslan, M., Atabas, I, and Erisen, A., 2007, Impact Investigation of Internet on System Performance in Web-Based Control Applications, Academic Informatics Conference (AB'07), pp. 63, 31 January-2 February 2007, Kutahya, Turkey 3. Arslan, M., Atabas, I., and Erisen, A., 2006, Internet-Originated Basic Problems and Their Solution Suggestions for Web-Based Control Applications, IV. Congress of Information Technology-Academic Informatics Conference (AB'06), pp , 9-11 February 2006, Denizli 4. Aslan, M., Atabas, I., Erişen, A., and Uzun, I., 2005, Remote Access Control Laboratory Applications", 2 nd National Symposium on Education in Electrical-Electronic and Computer Engineering, pp , May, 2005, Samsun 5. Erisen, A., and Ayata, T., 2000, Investigation of Flow and Temperature Distributions Depending on Exit Flow Position in a Naturally Ventilated Environment, Figes 5th Users Meeting Proceedings, October Erisen, A., Ayata, T., and Uzun, I., 2000, Investigation of Temperature Distribution over Non- Heated Surface of a Cylindrical Slab Exposed to a Non-Uniform Temperature Distribution at the Other Surface", SIMER 2000, 6th National Refrigeration and Air Conditioning Technology Congress, pp , April Uzun, I., Erisen, A., and Ayata, T., 2000, Effects of Fin Shape on Performance of Concentrically Finned Heat Exchangers, SIMER 2000, 6th National Refrigeration and Air Conditioning Technology Congress, pp , April Erisen, A., Arcaklioglu, E., and Yılmaz, R., 2000, Experimental Investigation of Performance Characteristics of Vapor Compression Refrigeration Units Using Mixtures of R12-R22 Refrigerant Fluid ", 6th National Congress of Refrigeration and Air Conditioning Technology, pp. 173, Cukurova University, Adana, Erisen, A., Arcaklioglu, E., and Yilmaz, R., 1998, Obtaining Liquid-Vapor Equilibrium of Propane-Isobutene and R12-R22 Refrigeration Fluid Mixtures by Using State Equation of Redlich-Kwong-Soave", 5 th National Refrigeration and Air Conditioning Technical Congress, pp. 148, Adana, 2-3 April Erisen, A., and Arcaklioglu, E., 1997, 2 nd Law Analysis of System Performance of Refrigeration Cycles Using Propane-Isobutene Mixtures at Various Mass Ratios", 11 th National Thermal Science and Technology Congress, Edirne, September Ipek, O., and Erisen, A., 1995, Neutronic Analysis of D-T Driven Hybrid Blankets Fueled with CmO2",

10 IXth Engineering Symposium, Süleyman Demirel University Engineering and Architecture Faculty, Isparta, pp , May, Erisen, A., and Kaya, M., 1995, Investigation of Performance Criteria Variation of Refrigeration Plant Defined by First and Second Law Analyses with Respect to Temperature Variation of Evaporator, Condenser and Environment, 10 th National Thermal Science and Technology Congress, Ankara, 6-8 September, Erisen, A., Ozcekic, M., and Onal, S., 1993, Redesign of Steam Distribution System of Drying Cylinders in a Paper Production Factory by using Availability Analysis, Thermal Science and Technology, 9 th National Congress, Proceedings Book, Vol. 1, pp , September Erisen, A., and Onal, S., 1993, Combustion Efficiency of a Boiler Depending on Fuel Flow Rate by using Exergy Analysis", Thermal Science and Technology, 9 th National Congress, Proceedings Book, Vol. 1, pp , September Erisen, A., Ocal, C., Ipek, O., and Kocak, S., 1992, Neutron-Physics Analysis of Plutonium Based Nuclear Fuel Medium in terms of Mass and Reflector Effectiveness", Akdeniz University, Isparta Engineering Faculty, 7th Engineering Week, May Erisen, A., Ocal, C., Ipek, O., and Kocak, S., 1991, Neutron-Physics Analysis of Plutonium Based Nuclear Fuel Medium with Uranium Reflector, Energy Management Economy Congress Proceedings Book, pp. 355, May Erisen, A., Yapici, H, and Koc, A., 1987, Computer-Aided Computation of Steady State Temperature Distribution in a Sphere", 6 th National Thermal Science and Technology Congress, September, Erisen, A., Yapici, H., and Kocak, S., 1987, Calculation of Stress Distribution at an Elastic Layer Connected to a Rigid Base and Subjected to Two District Pressure Load by using Fourier Transform", XI. National Operational Research Conference, September, Erisen, A., Yapici, H., and Kocak, S., 1987, Investigation of a Flux Distribution in a D-T Driven Hybrid Blanket with Flattened Power Generation", 6 th National Thermal Science and Technology Congress, September Erisen, A., 1985, The Use of a Multi-Layered Shield Made of Different Materials in the Radiation Protection Against Strong Neutron Flux, 1 st National University-Industry Collaboration Symposium, Kayseri. Hobbies: Nature sports (trekking, climbing) Playing soccer Playing table tennis References: Provided upon request. Cited publications: There are more than 80 citing publications to the publications listed above.