AZIZE AKCAYOGLU, Ph.D.
|
|
- Georgina Wilson
- 8 years ago
- Views:
Transcription
1 AZIZE AKCAYOGLU, Ph.D. Associate Professor of Mechanical Engineering Date modified: Jan 2014 Nationality : Turkish Languages : English, Turkish Address : Mersin University Faculty of Technology, Kartaltepe Mah. P.K. 92 Takbas, Tarsus, Mersin, Turkey Phone (work) : +90 (0) Ext:109 Fax : +90 (0) azize.akcayoglu@gmail.com azize@mersin.edu.tr Web : Azize Akcayoglu is currently working as an Associate Professor in Mersin University, Turkey. She received her B.Sc, M.Sc. and Ph.D. degrees in Mechanical Engineering from Cukurova University in 1994, Mersin University in 1998 and Cukurova University in 2004, respectively. Akcayoglu s research focuses on experimental fluid mechanics, computational fluid dynamics and heat transfer specializing on laminar and turbulent steady and unsteady flows and convective heat transfer. Past research activities include enhancement of heat transfer and energy efficiency in heat exchangers and in non-circular ducts, dense gas dispersion, renewable energy applications, greenhouse heating, waste heat recovery using computational fluid dynamics (CFD) and particle image velocimetry (PIV) techniques. Current research projects deal with; efficient internal cooling of gas turbine blades, cooling of electronics in nanoscale, optimum thermohydraulic performance of vortex generators, and an exoskeleton robot design used for rehabilitation of upper limbs. She established Numerical Modeling (Computational Fluid Dynamics-CFD) Laboratory in Faculty of Technology, Mersin University, in She has been teaching general and advanced mechanical engineering courses including fluid mechanics, solid mechanics, internal combustion engines, heat and mass transfer, mechanical design, CAD/CAM, technical and computer aided drawing, occupational safety and risk, quality improvement, etc. in undergraduate and graduate levels since Degrees: Ph.D., Department of Mechanical Engineering, Cukurova University, Turkey, 2004 (English) Dissertation Title: Computational Modeling of Turbulent Heat Transfer in Plate Fin and Tube Heat Exchangers (in English) M.Sc., Department of Mechanical Engineering, Mersin University, Turkey, 1998 Dissertation Title: A Machine Design for Separating Pulp and Seed of Citrus Fruits B.Sc., Department of Mechanical Engineering, Cukurova University, Turkey, 1994 (English) Dissertation Title: Design and Construction of Drain and Pipeline Sytems
2 Service and Academic Experience: Associate Professor Mersin University, Post Doctoral Visiting Scholar-Fellow Mechanical Engineering, Brunel University, UK, Assistant Professor Mersin University, Post Doctoral Research and Teaching Associate Mechanical Engineering, Mersin University, Research and Teaching Associate Fluid Mechanics Laboratory and Mechanical Engineering Department, Cukurova University, Research and Teaching Assistant Agricultural Machinery, Cukurova University, Research and Teaching Assistant Mechanical Engineering, Mersin University, (based on the highest grade from research assistantship entrance exam) Mechanical Engineer An elevator company, Research Interests: Fluid Mechanics Thermodynamics Convective Heat Transfer Mass Transfer Turbulence Heat Transfer Enhancement Compact Heat Exchangers HVAC&R Cooling of vehicle radiators Engineering Turbulence Modeling Energy Efficiency Unsteady Flows Junction Fows Dense Gas Dispersion Renewable Energies Electronics cooling in nanoscale Gas turbine blade internal cooling Wind energy and nuclear energy applications in Mediterranean region Heating, Ventilating and Air Conditioning installations in buildings Wind turbine design Natural gas installation Exoskeleton robot design Computational Fluid Dynamics and Heat Transfer (CFD) Particle Image Velocimetry (PIV)
3 Current Research Areas and Topics: Computation, experimentation and modeling of turbulent unsteady flows and heat transfer Steady and unsteady separated flow analyses using Computational Fluid Dynamics (CFD) Fluid-structure interactions using high-image-density Particle Image Velocimetry (PIV) technique Application of Large Eddy Simulation (LES) Method for junction flows Numerical modeling of dispersion of heavier than air gases in turbulent atmospheric boundary layer Three-dimensional computational analyses of heat transfer triggered by turbulent flows in heat exchangers Energy efficiency enhancement and optimization in HVAC&R applications Flow characteristics and thermohydraulic performance in non-circular ducts Flow and heat transfer around delta- wing type vortex generators Greenhouse heating via geothermal energy Design and production of solar-powered race cars Gas Turbine Blade Leading Edge Internal Cooling Using Efficient Heat Transfer Surfaces Cooling of electronic devices in nanoscale An exoskeleton robot design to support passive exercise movements used in rehabilitation of upper limbs Undergraduate Courses Taught and Assisted (since 1995): Fluid Mechanics Thermodynamics Heat and Mass Transfer Computational Fluid Dynamics Experimental Fluid Mechanics Engineering Mechanics Mechanical Design Engineering Drawing Internal Combustion Engine Fundamentals Internal Combustion Engine Adjustments Motor Vehicle Maintenance Gas Turbines Computer Aided Drawing Solid Mechanics-Statics, Dynamics Strength of Materials Computer Aided Design Computer Aided Manufacturing Basic Computer Sciences Measurement Techniques Industrial Applications Mechanisms Descriptive Geometry Technical Foreign Language (English) Business Economics General Mechanical Engineering and Mechanical Laboratory Experiments
4 Graduate Courses Taught: Advanced Engineering Mathematics I Advanced Engineering Mathematics II Analytical Solutions of Differential Equations High Temperature Thermodynamics Energy Methods in Mechanics Computational Fluid Dynamics Design and Production of Pneumatic and Hydraulic Transport Systems Computer-Aided Product Design and Optimization In Manufacturing Engineering Computer-Aided System and Equipment Design In Automotive Production Quality Improvement Techniques Occupational Safety and Risk Analysis Administrative Services: Member of the ethics committee of university life, Mersin University, since 2013 Academic Evaluation and Quality Improvement Committee Authorized Representative, Faculty of Technology, Mersin University, since Academic Evaluation and Quality Improvement Committee Responsible, Automotive Engineering Department, Mersin University, since Diploma Supplement & ECTS (European Credit Transfer System) Coordinator, Department of Mechanical Education (Graduate level), Mersin University, since Diploma Supplement & ECTS (European Credit Transfer System) Coordinator, Department of Mechanical Education (Undergraduate level), Mersin University, since Bologna Coordinator, Department of Mechanical Education, Mersin University, since Erasmus Programme Coordinator, Department of Mechanical Education, Mersin University, since Farabi Student Mobility Programme Coordinator, Department of Mechanical Education, Mersin University, since Quality Representative, Faculty of Technical Education, Mersin University, since 2010.
5 Institutional and Professional Services: Thesis and Project Supervisions Thesis Supervisor, Master of Science, An exoskeleton robot design to support passive exercise movements used in rehabilitation of upper limbs, Mersin University, Institute of Science, Department of Manufacturing Engineering, İbrahim Yapici, (2013- continued) Thesis Co-Supervisor, Master of Science, Computational Study of Gas Turbine Blade Leading Edge Internal Cooling Using Efficient Heat Transfer Surfaces, Gaziantep University, Faculty of Engineering, Department of Mechanical Engineering, Celal Nazli, (2013- continued) Thesis Supervisor, Master of Science, Three-Dimensional Numerical Analysis of Optimum Characteristics of Delta-Wings in the Context of Energy Efficiency, Mersin University, Institute of Science, Department of Mechanical Education, Cenap Ozgun, (2013- continued) Thesis Supervisor, Master of Science, Mersin University, Institute of Science, Department of Mechanical Education, Emre Sezen (2011- continued) Scientific Project Supervisor, for the projects proposed to Scientific and Technological Council of Turkey, (TUBITAK), since 2012 Final Year Project Supervisor, Department of Mechanical Education, Mersin University, since 2010 Reviews and Editorships Reviewer, 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT, 2014 Reviewer, International Journal of Thermal Sciences, since 2013 Principal editor, book translation, Principles of Engineering Thermodynamics by M. J. Moran, H. N. Shapiro, 7 th edition, 2013-cont. Reviewer, Journal of Mechanical Science and Technology, since 2012 Reviewer, ASME Journal of Heat Transfer, since 2011 Reviewer, Engineering Applications of Computational Fluid Mechanics, since 2011 Jury Memberships Jury Member, Flow Investigations Around Circular Horizontal Cylinders with Spoiler,, M.Sc. Thesis, Mustafa Kemal University, Mechanical Engineering Department, Halil Cebeci, 2013 Jury Member, Computational Fluid Dynamics Analysis in High-Temperature Industrial Chimneys Without Economizer, M.Sc. Thesis, Mustafa Kemal University, Mechanical Engineering Department, Aykut Guzel, 2013 Jury Member, Control of Unsteady Flow Structure Occuring Behind Cylinder by Passive Control Methods M.Sc. Thesis, Mersin University, Mechanical Education Department, Mehmet Kucuk, 2013
6 Jury Member, Technical and Economical Analyses of an Electrolysis Apparatus used to Supply Excess Hydrogen for Internal Combustion Engines, M.Sc. Thesis, Mersin University, Mechanical Engineering Department, Düzgün Deniz Karabulut, 2009 Memberships in Advisory Committee Comission Member for assessment of the projects proposed to Science, Industry and Technology Ministry of Turkey, since 2013 Scientific Project Panelist, for the projects applied to Scientific and Technological Council of Turkey, (TUBITAK), since 2013 Executive Committee Member, Agricultural Machinery Symposium and Exhibition, organised by Turkish Chamber of Mechanical Engineers (TMMOB), Mersin Branch, Mersin, November, 2001 Other Services Educator, in Science and Nature Education From Mediterranean Sea to Toros Mountains project, sponsored by Scientific and Technological Council of Turkey (TUBITAK) Founder of the Numerical Modeling (Computational Fluid Dynamics) Laboratory, Faculty of Technology, Mersin University, 2012 Student Advisor, 1 st, 2 nd and 3 rd years, Mechanical Education Department, Mersin University, since 2009 Educator, Formula G-2007 Solar Car Race, organized by Scientific and Technological Council of Turkey, (TUBITAK), Ataturk Culture Center, Ankara, Turkey, 2007 Forensic Engineer, as a Mechanical Engineer, Mersin Provincial Courts, since 1995 Authorized Mechanical Engineer, motor and chasis number determination and examination of motor vehicles, Mechanical Engineering Department, Mersin University, between Scientific Awards and Honors: 1) Name : International Post Doctoral Research Fellowship Programme (School of Engineering and Design, Brunel University, London, UK) Sponsor : Scientific and Technological Council of Turkey (TUBITAK) Period : ) Name : Incentive awards for scientific publications Sponsors : Scientific and Technological Council of Turkey (TUBITAK) Period : Since ) Name : Incentive awards for scientific publications Sponsors : Mersin University Period : Since 2004
7 Membership of Institutions: Member of American Society of Mechanical Engineers (ASME) finished Member of Turkish Chamber of Mechanical Engineers (TMMOB) continued Member of Turkish Society of Installation Engineers (TTMD) continued Member of Turkish Thermal Science and Engineering Association (ULIBTK) continued Funded Research and Contracts: 1) Title : Principal Investigator Project name : Numerical Modeling of Interaction of Hydrodynamics and Heat Transfer Fields Around Delta-Wing Type Vortex Generators in Triangular Channels Contract No : 111M726 Sponsor : Scientific and Technological Council of Turkey (TUBITAK) Host : Mersin University, Faculty of Technology, Turkey Period : (continued) 2) Title : Principal Investigator Project name : Determination of Optimum Properties of Delta-Wings by Three-Dimensional Numerical Analysis (CFD) Method in the Context of Energy Efficiency Contract No : BAP-FBE MEB (ES) YL Host : Mersin University, Faculty of Technical Education, Turkey Period : (continued) 3) Title : Principal Investigator Project name : Investigations of Heat Transfer Enhancement Techniques in Triangular Ducts Contract No : BAP-TTEF MEB (AA) HD Host : Mersin University, Faculty of Technical Education, Turkey Period : (finished) 4) Title : Post-doctoral fellow Project name : Numerical modeling of dispersion of a heavier than air gas in turbulent atmospheric boundary layer Sponsor : Scientific and Technological Council of Turkey (TUBITAK) Host : Brunel University, Mechanical Engineering Department, London, UK Period : (finished) 5) Title : Principal Investigator Project name : Design and production of a solar-powered race car Contract No : MUH/F/MM(AA)/ Host : Mersin University, Mechanical Engineering Department, Turkey Period : (finished) 6) Title : Investigator Project name : Investigations of flow characteristics in heat exchanger models having different geometrical characteristics Contract No : MMF2004BAP13 Sponsor : Office of Scientific Research Projects of Cukurova University Host : Cukurova University, Mechanical Engineering Department, Turkey Period : (finished)
8 7) Title : Investigator Project name : Computational Modeling of Turbulent Heat Transfer for the Design of Heat Exchangers Used in Greenhouses Heated by Geothermal Energy Contract No : MİSAG147 Sponsor : Scientific and Technological Council of Turkey (TUBITAK) Host : Mersin University, Mechanical Engineering Department, Turkey Period : (finished) 8) Title : Investigator Project name : Computational Modeling of Convective Heat Transfer for Waste Heat Recovery Systems Contract No : MUH. FAK. (MT) Host : Mersin University, Mechanical Engineering Department, Turkey Period : (finished) 9) Title : Investigator Project name : Application of the LES Method in Heat Exchanger Design Contract No : D-2001 FBE.2001.D.39 Sponsor : Office of Scientific Research Projects of Cukurova University Host : Cukurova University, Agricultural Engineering Department, Turkey Period : (finished) 10) Title : Investigator Project name : Numerical Modeling of Turbulent Heat Transfer in Heat Exchanger Design Contract No : FBE-MM (AA) D Host : Mersin University, Mechanical Engineering Department, Turkey Period : (finished) 11) Title : Investigator Project name : Design of a Separating Machine for Citrus Fruit Seeds Contract No : FBE/MM(AA)/ YL Host : Mersin University, Mechanical Engineering Department, Turkey Period : (finished) Publications: Refereed International Journal Publications 1 Mokhtarzadeh Dehghan M.R., Akcayoglu, A., Robins, A.G., Numerical Study and Comparison With Experiment of Dispersion of a Heavier-Than-Air Gas in a Simulated Neutral Atmospheric Boundary Layer, Journal of Wind Engineering and Industrial Aerodynamics, 110, Akcayoglu, A., Flow Past Confined Delta-Wing Type Vortex Generators, Experimental Thermal and Fluid Science, 35(1): Ozturk, N.A., Akcayoglu, A., Sahin, B., Downstream Particle Image Measurements of a Circular Cylinder-Plate Junction, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223(8): Ozturk, N.A., Akkoca, A., Sahin, B., PIV Measurements of Flow Past a Confined Cylinder, Experiments in Fluids, 44: Ozturk, N.A., Akkoca, A., Sahin, B., Flow Details Of A Circular Cylinder Mounted On A Flat Plate, Journal of Hydraulic Research, 46(3):
9 6 Sahin, B., Akkoca, A., Ozturk, N.A., Akilli, H., Investigations of Flow Characteristics in a Plate Fin and Tube Heat Exchanger Model Composed of Single Cylinder, International Journal of Heat and Fluid Flow, 27(3): Tutar, M., Akkoca, A., Numerical Analysis of Fluid Flow and Heat Transfer Characteristics in a Three Dimensional Plate Fin and Tube Heat Exchanger, Numerical Heat Transfer, Part A, 46(3): Akkoca, A., Zeren, Y., Design of a Machine for Separating Lemon Seed and Pomace, Agricultural Mechanization in Asia, Africa and Latin America (AMA), 33(2): Refereed International Conference Presentations with Proceedings 1 Akcayoglu, A., Cebeci, H., Nazli, C. Thermo-hydraulic Performance Evaluation of Inclined Vortex Generators MSMEE International Conference on Materials Science, Machinery and Energy Engineering, December 24-25, Hong Kong, This presentation has been published in: Advanced Materials Research Vol. 853 (2014) pp (2014) Trans Tech Publications, Switzerland doi: / 2 Akcayoglu, A., Sahin, B., Canpolat, C., Akilli, H. Experimental Fow Results in a Non-Circular Duct With Heat Transfer Augmenting Obstacles, WCE 2010, World Congress of Engineering, 30 June-2 July, 2010, London, UK. This presentation has been published in: Lecture Notes in Engineering and Computer Science, 2010, vol. 2184, ıss:1, pp Tutar, M., Akkoca, A. A computational study of effects of different geometrical parameters on heat transfer and fluid flow in a wavy and plain fin and tube heat exchanger, 6 th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2002), 9-12 July 2002, Istanbul, CD-ROM. 4 Tutar M., Akkoca, A., Öztekin, S. A Numerical Study of Heat Transfer And Fluid Flow In A Plate Fin- and- Tube Heat Exchanger, Proceedings of Symposium on Emerging Technologies For Fluids, Structures, and Fluid/Structure Interactions, ASME PVP Conference July 22-26, 2001, Atlanta, Georgia, Proceedings, 431: Soysal, Y., Oztekin, S., Akkoca, A. Selection of Equilibrium Moisture Content Equations for Some Fruits and Vegetables 7th International Congress on Mechanization and Energy in Agriculture, Adana, May 26-27, Proceedings, Soysal, Y., Oztekin, S., Akkoca, A., Selection of Equilibrium Moisture Content Equations for Some Medicinal and Aromatic Plants 7th International Congress on Mechanization and Energy in Agriculture, Adana, May 26-27, Proceedings, Refereed National Journal Publications 1 Akkoca, A., Sahin, B., Tutar, M., Effect of Different Wall Functions on the Prediction of Flow and Heat Transfer Characteristics in Plate Fin and Tube Heat Exchangers, Journal of Faculty of Engineering and Architecture of Selcuk University, vol.20, no.4, Akkoca, A., Ozturk, N.A., Description of Particle Image Velocimetry Technique and its Applications, Journal of Faculty of Engineering and Architecture of Cukurova University, ISSN , vol.20, no.2, Akkoca, A., Ozturk, N.A., Sahin, B., Akilli, H., Horseshoe Vortex Formation and Evolution in a Single Row Plate Fin and Tube Heat Exchanger, Journal of Faculty of Engineering and Architecture of Cukurova University, vol.19, no.2, Akkoca, A., Effects of Laminar/Turbulence Modelling on the Prediction of Flow Characteristics and Heat Transfer Data in Plate Fin and Tube Heat Exchangers, Journal of Faculty of Engineering and Architecture of Cukurova University, vol.19, no.2,
10 5 Akkoca, A., Determination of Optimum Geometrical Parameters of Compact Heat Exchangers Using Computational Fluid Dynamics, Journal of Faculty of Engineering and Architecture of Cukurova University, vol.19, no.2, Other Professional Publications / Research Reports 1 Investigations of Heat Transfer Enhancement Techniques in Triangular Ducts, Office of Scientific Research Projects of Mersin University, No: BAP-TTEF MEB (AA) HD, Numerical Modelling of Dispersion of a Heavier Than Air Gas in Turbulent Atmospheric Boundary Layer, Scientific and Technological Council of Turkey (TUBITAK), No: 2219, Design and production of a solar-powered race car, Office of Scientific Research Projects of Mersin University, No: MUH/F/MM(AA)/2007-1, Investigations of flow characteristics in heat exchanger models having different geometrical characteristics, Office of Scientific Research Projects of Cukurova University, No: MUH.FAK.(MT), Computational Modeling of Turbulent Heat Transfer for the Design of Heat Exchangers Used in Greenhouses Heated by Geothermal Energy, Scientific and Technological Council of Turkey, No: MİSAG147, Computational Modeling of Convective Heat Transfer for Waste Heat Recover Systems, Office of Scientific Research Projects of Mersin University, No: MUH. FAK. (MT) , Application of the LES Method in Heat Exchanger Design, Office of Scientific Research Projects of Cukurova University, No: D-2001 FBE.2001.D.39, Numerical Modeling of Turbulent Heat Transfer in Heat Exchanger Design, Office of Scientific Research Projets of Mersin University, No: FBE-MM (AA) D, Design of a Separating Machine for Citrus Fruit Seeds, Office of Scientific Research Projects of Mersin University, No: FBE/MM(AA)/ YL,1998. Refereed National Conference Presentations with Proceedings 1 Akcayoglu, A., Nazli, C. R&D studies on solar energy in Turkey and over the globe and a suggestion of an interdisciplinary project application for Mersin region 6 th Solar Energy Systems Symposium and Exhibition, Turkish Chamber of Mechanical Engineers (TMMOB), Mersin Branch, Mersin, Turkey, December 06-07, Ozturk, N.A., Akkoca, A., Sahin, B., Experimental investigation of flow physics in staggered tube bundles, 2 nd National Aviation and Space Conference, October 2008, ITU, İstanbul, Turkey. Proceeding No: UHUK Akkoca, A., Şahin, B., Ozturk, N.A., Akıllı, H., Experimental determination of flow characteristics in a plate fin and tube heat exchanger, 1 st National Aviation and Space Conference, September 2006, ODTU, Ankara, Turkey. Proceeding No: UHUK Ozturk, N.A., Akkoca, A., Sahin, B., Investigation of flow around a cylinder mounted on flat plate using PIV method HASEM 06, Kayseri 6 th Aviation Symposium, Proceedings, pp: May 2006, Nevşehir, Turkey. 5 Ozturk N.A., Akkoca, A., Sahin, B., Akilli, H., Flow structure investigations in a compact heat exchanger using PIV Technique, GAP 5 th Engineering Congress, Proceedings, Vol: 1, pp: 44-51, April 2006, Şanlıurfa, Turkey. 6 Tutar, M., Akkoca, A., CFD Modelling of Heat Transfer and Corresponding Turbulent Flow Characteristics of Plate Fin and Tube Heat Exchangers Used in Greenhouses, 6 th FIGES Meeting Conference, Proceedings, pp: , 8-10 November, 2001, Bursa. Turkey.
11 7 Tutar, M., Akkoca, A., Öztekin, S., A Numerical Study for Comparison of Laminar and Turbulent Flow Regimes in a Plate Fin and Tube Heat Exchanger, 13 rd National Heat Science and Technology Conference, Proceedings, pp: , 5-7 September 2001, Konya, Turkey. 8 Akkoca, A., Zeren, Y., Design of a machine for seperating pulp and seeds obtained as a by-product in food industry, 17 th National Agricultural Mechanization and Energy Conference, Proceedings, pp: ,tokat, Turkey. Scientific Presentations: 1 Akcayoglu, A., Thermo-hydraulic Performance Evaluation of Inclined Vortex Generators MSMEE International Conference on Materials Science, Machinery and Energy Engineering, December 24-25, Hong Kong, Akcayoglu, A., R&D studies on solar energy in Turkey and over the globe and a suggestion of an interdisciplinary project application for Mersin region 6 th Solar Energy Systems Symposium and Exhibition, Turkish Chamber of Mechanical Engineers (TMMOB), Mersin Branch, Mersin, Turkey, December 06-07, Akcayoglu, A., Experimental Fow Results in a Non-Circular Duct With Heat Transfer Augmenting Obstacles, WCE 2010, World Congress of Engineering, Imperial College, London, UK, July 1, Akkoca, A., Experimental determination of flow characteristics in a plate fin and tube heat exchanger, 1 st National Aviation and Space Conference, Middle East Technical University, Ankara, Turkey, September 22, Akkoca, A., Investigation of flow around a cylinder mounted on flat plate using PIV method, HASEM 06, Kayseri 6 th Aviation Symposium, Kapadokya Dedeman Hotel, Nevşehir, Turkey, May 12, Akkoca, A., A computational study of effects of different geometrical parameters on heat transfer and fluid flow in a wavy and plain fin and tube heat exchanger, 6 th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2002), Istanbul Technical University, Gumussuyu, Istanbul, July, 9, Akkoca, A., A Numerical Study for Comparison of Laminar and Turbulent Flow Regimes in a Plate Fin and Tube Heat Exchanger, 13 rd National Heat Science and Technology Conference, Selcuk University, Konya, Turkey September 5, Akkoca, A., Design of a machine for seperating pulp and seeds obtained as a by-product in food industry, 17 th National Agricultural Mechanization and Energy Conference, Cumhuriyet University, Tokat, Turkey, September 19, 1997.
Çankırı Karatekin University, Çankırı, Turkey. Lecturer of Refrigeration and Air Conditioning Engineering Technology Program of College
E UROPEAN CURRICULUM VITAE FORMAT PERSONAL INFORMATION Name ARSLAN Kamil (Asst. Prof. Dr.) Address Çankırı Karatekin University, Technical and Business College, 18200, Cankiri, TURKEY Telephone +90 376
More informationTitle The institution Years
Name and surname: Engin GEDİK Birth date : 12.04.1981 CV and list of the Academic Effort 1. Education Degree Department University Year Bachelor (BSc) Mechanical Education Z. Karaelmas University 2004
More informationHEAT TRANSFER IM0245 3 LECTURE HOURS PER WEEK THERMODYNAMICS - IM0237 2014_1
COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE HEAT TRANSFER IM05 LECTURE HOURS PER WEEK 8 HOURS CLASSROOM ON 6 WEEKS, HOURS LABORATORY, HOURS OF INDEPENDENT WORK THERMODYNAMICS
More informationGraduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering
Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Intended Audience: Main Campus Students Distance (online students) Both Purpose:
More informationAssist. Prof. Dr. Gokhan Aydin
Assist. Prof. Dr. Gokhan Aydin Karadeniz Technical University (KTU), Faculty of Engineering Department of Mining Engineering, Trabzon, Turkey Tel.: + 90 (462) 377 40 98 Fax: + 90 (462) 325 74 05 gaydin@ktu.edu.tr
More informationHEAT TRANSFER ANALYSIS IN A 3D SQUARE CHANNEL LAMINAR FLOW WITH USING BAFFLES 1 Vikram Bishnoi
HEAT TRANSFER ANALYSIS IN A 3D SQUARE CHANNEL LAMINAR FLOW WITH USING BAFFLES 1 Vikram Bishnoi 2 Rajesh Dudi 1 Scholar and 2 Assistant Professor,Department of Mechanical Engineering, OITM, Hisar (Haryana)
More informationFLUID MECHANICS IM0235 DIFFERENTIAL EQUATIONS - CB0235 2014_1
COURSE CODE INTENSITY PRE-REQUISITE CO-REQUISITE CREDITS ACTUALIZATION DATE FLUID MECHANICS IM0235 3 LECTURE HOURS PER WEEK 48 HOURS CLASSROOM ON 16 WEEKS, 32 HOURS LABORATORY, 112 HOURS OF INDEPENDENT
More informationELECTRICAL ENGINEERING DEGREE. List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO
ELECTRICAL ENGINEERING DEGREE List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO 1 Degree: Site: (V12G320V01) Bachelor's Degree in Electrical
More informationKeywords: Heat transfer enhancement; staggered arrangement; Triangular Prism, Reynolds Number. 1. Introduction
Heat transfer augmentation in rectangular channel using four triangular prisms arrange in staggered manner Manoj Kumar 1, Sunil Dhingra 2, Gurjeet Singh 3 1 Student, 2,3 Assistant Professor 1.2 Department
More informationM Curriculum Vitae PERSONAL DATA
M Curriculum Vitae Hakan Saricayir, Ph.D. Marmara University Ataturk Education Faculty Chemistry Education Department Istanbul/TURKEY +90 532 645 58 42 (Cell) Email:hsaricayir@gmail.com hsaricayir@marmara.edu.tr
More informationHEAT TRANSFER AUGMENTATION IN A PLATE-FIN HEAT EXCHANGER: A REVIEW
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 37-41, Article ID: IJMET_07_01_005 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=1
More informationAssoc. Prof. Dr. Fatih SELİMEFENDİGİL
Assoc. Prof. Dr. Fatih SELİMEFENDİGİL EDUCATION Degree University Department / Program Years Istanbul Technical 2001- Undergrad Mechanical Eng. University 200 M.S. Technical University of Mechanical Eng.
More informationNUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES
Vol. XX 2012 No. 4 28 34 J. ŠIMIČEK O. HUBOVÁ NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Jozef ŠIMIČEK email: jozef.simicek@stuba.sk Research field: Statics and Dynamics Fluids mechanics
More informationNumerical Investigation of Heat Transfer Characteristics in A Square Duct with Internal RIBS
merical Investigation of Heat Transfer Characteristics in A Square Duct with Internal RIBS Abhilash Kumar 1, R. SaravanaSathiyaPrabhahar 2 Mepco Schlenk Engineering College, Sivakasi, Tamilnadu India 1,
More informationTURKISH NUCLEAR POWER PROGRAMME NUCLEAR ENERGY PROJECT IMPLEMENTATION DEPARTMENT
TURKISH NUCLEAR POWER PROGRAMME NUCLEAR ENERGY PROJECT IMPLEMENTATION DEPARTMENT 0 75 75 150 km Kocaeli (İzmit) BOSBORUS 0 İzmir Konya ANKARA 150 mi İçel (Mersin) REPUPLIC OF CYPRUS Iskenderun Adana SYRIA
More information: http://www.muh.istanbul.edu.tr:3500/makine/akademik2.asp?id=33
CURRICULUM VITAE Name : Yunus Ziya ARSLAN Born : February 8, 1980, Balıkesir, Turkey Citizenship : Turkish Marital status : Married Address : İstanbul Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği
More informationADVANCED TOOL FOR FLUID DYNAMICS- CFD AND ITS APPLICATIONS IN AUTOMOTIVE, AERODYNAMICS AND MACHINE INDUSTRY
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 177 186, Article ID: IJMET_07_02_019 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2
More informationMEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi
MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi Time and Venue Course Coordinator: Dr. Prabal Talukdar Room No: III, 357
More informationDepartment of Mechanical Engineering
About The Department The at BITS-Pilani is one of the premier departments in the institute that provides a unique educational and research environment. Its various Bachelor s, Master s and Doctoral Programs
More informationDEVELOPMENT OF HIGH SPEED RESPONSE LAMINAR FLOW METER FOR AIR CONDITIONING
DEVELOPMENT OF HIGH SPEED RESPONSE LAMINAR FLOW METER FOR AIR CONDITIONING Toshiharu Kagawa 1, Yukako Saisu 2, Riki Nishimura 3 and Chongho Youn 4 ABSTRACT In this paper, we developed a new laminar flow
More informationMAXIMISING THE HEAT TRANSFER THROUGH FINS USING CFD AS A TOOL
MAXIMISING THE HEAT TRANSFER THROUGH FINS USING CFD AS A TOOL Sanjay Kumar Sharma 1 and Vikas Sharma 2 1,2 Assistant Professor, Department of Mechanical Engineering, Gyan Vihar University, Jaipur, Rajasthan,
More informationCATALOG CHANGES - F13. The Department of Ocean and Mechanical Engineering offers programs of study leading to the following degrees:
CATALOG CHANGES - F13 Ocean and Mechanical Engineering Department: The following changes are necessary to update the catalog. The first change is to include the combined BSME to MS degree program in the
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2015-2016 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November 1,
More informationIntegration of a fin experiment into the undergraduate heat transfer laboratory
Integration of a fin experiment into the undergraduate heat transfer laboratory H. I. Abu-Mulaweh Mechanical Engineering Department, Purdue University at Fort Wayne, Fort Wayne, IN 46805, USA E-mail: mulaweh@engr.ipfw.edu
More informationWEEKLY SCHEDULE. GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class room, audio-visual class room)
SESSION WEEK COURSE: THERMAL ENGINEERING DEGREE: Aerospace Engineering YEAR: 2nd TERM: 2nd The course has 29 sessions distributed in 14 weeks. The laboratory sessions are included in these sessions. The
More informationInternational Master of Science Degree Program
International Master of Science Degree Program Sustainable Energy Systems Courses in English http://www.sirius.luth.se/energy/ International Master of Science Degree Program taught in English at Luleå
More informationMASTER OF ENGINEERING Mechanical Engineering Program
MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.
More informationThe ADREA-HF CFD code An overview
The ADREA-HF CFD code An overview Dr. A.G. Venetsanos Environmental Research Laboratory (EREL) National Centre for Scientific Research Demokritos, Greece venets@ipta.demokritos.gr Slide 2 Computational
More informationMEng Aeronautical Engineering (H401)
Programme Specification (Undergraduate) MEng Aeronautical Engineering (H401) This document provides a definitive record of the main features of the programme and the learning outcomes that a typical student
More informationKeywords: CFD, heat turbomachinery, Compound Lean Nozzle, Controlled Flow Nozzle, efficiency.
CALCULATION OF FLOW CHARACTERISTICS IN HEAT TURBOMACHINERY TURBINE STAGE WITH DIFFERENT THREE DIMENSIONAL SHAPE OF THE STATOR BLADE WITH ANSYS CFX SOFTWARE A. Yangyozov *, R. Willinger ** * Department
More informationHANDBOOK FOR GRADUATE STUDENTS MECHANICAL ENGINEERING. College of Engineering. Wayne State University. Detroit, Michigan
HANDBOOK FOR GRADUATE STUDENTS in MECHANICAL ENGINEERING College of Engineering Wayne State University Detroit, Michigan http://www.eng.wayne.edu/me/welcome.html September 2010 Table of Contents Introduction
More informationNUCLEAR ENERGY RESEARCH INITIATIVE
NUCLEAR ENERGY RESEARCH INITIATIVE Experimental and CFD Analysis of Advanced Convective Cooling Systems PI: Victor M. Ugaz and Yassin A. Hassan, Texas Engineering Experiment Station Collaborators: None
More informationFREE CONVECTION FROM OPTIMUM SINUSOIDAL SURFACE EXPOSED TO VERTICAL VIBRATIONS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 214-224, Article ID: IJMET_07_01_022 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=1
More informationCurriculum Vita. Bachelor of Science, Mechanical Engineering, 1985 North Carolina State University, Raleigh, North Carolina
Curriculum Vita Gregory K. Watkins, Ph.D., PE Department of Mechanical and Mechatronic Engineering and Sustainable Manufacturing California State University Chico Voice: 530.898.4388 Fax: 530.898.4070
More informationCURRICULUM VITAE PROF. DR. MUSTAFA İLBAŞ
CURRICULUM VITAE PROF. DR. MUSTAFA İLBAŞ 1. Family name: Ilbas 2. First names: Mustafa 3. Date of birth: 01/03/1967 4. Nationality: Turkish 5. Civil status: married 6. Education:, Faculty of Engineering,
More informationPedro Valente PERSONAL INFORMATION. Date of Birth: 27 of March 1984. Home address: R. da Casquilha 16, 6Dto, 1500-149 Lisbon, Portugal
Pedro Valente Instituto Superior Técnico Mecânica I, 1 andar/lasef Avenida Rovisco Pais, 1049-001 Lisboa pedro.cardoso.valente@tecnico.ulisboa.pt http://web.ist.utl.pt/pedro.cardoso.valente PERSONAL INFORMATION
More informationThe Science Education System in Oxford and the UK. David Andrews
The Science Education System in Oxford and the UK David Andrews 1 Outline of this talk High school education (brief) Undergraduate education Oxford Physics Other sciences at Oxford Other universities Postgraduate
More informationDepartment of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D.
Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology Graduate Program (S.M., Ph.D., Sc.D.) Field: Air-Breathing Propulsion Date: September 4, 2007 Introduction
More informationINTRODUCTION TO FLUID MECHANICS
INTRODUCTION TO FLUID MECHANICS SIXTH EDITION ROBERT W. FOX Purdue University ALAN T. MCDONALD Purdue University PHILIP J. PRITCHARD Manhattan College JOHN WILEY & SONS, INC. CONTENTS CHAPTER 1 INTRODUCTION
More informationGraduate Faculty Committee Doc. No. 1135 Approved February 23, 2009
Graduate Faculty Committee Doc. No. 1135 Approved February 23, 2009 RECOMMENDATION OF THE SUBCOMMITTEE ON GRADUATE COURSE AND CURRICULUM AND THE FACULTY OF THE COLLEGE OF ENGINEERING AND APPLIED SCIENCE
More informationMaster of Science Program (M.Sc.) in Renewable Energy Engineering in Qassim University
Master of Science Program (M.Sc.) in Renewable Energy Engineering in Qassim University Introduction: The world is facing the reality that the global energy demand is increasing significantly over the coming
More informationPoznan University of Technology Faculty of Electrical Engineering
Poznan University of Technology Faculty of Electrical Engineering Contact Person: Pawel Kolwicz Vice-Dean Faculty of Electrical Engineering pawel.kolwicz@put.poznan.pl List of Modules Academic Year: 2015/16
More informationCurriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements
Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements Total: 36 credits Curriculum Structure: A. Thesis 36 credits
More informationDepartment of Environmental Science and Technology. MSc in Energy Resource Management
Department of Environmental Science and Technology MSc in Energy Resource Management Vision and Mission of the Department Vision The establishment of an internationally recognized Department in the field
More informationACADEMIC AFFAIRS COUNCIL ******************************************************************************
Attachment I ACADEMIC AFFAIRS COUNCIL AGENDA ITEM: 4.D.2 DATE: April 16, 2009 ****************************************************************************** SUBJECT: Intent to Plan SDSMT PhD in Mechanical
More informationExperimental Study of Free Convection Heat Transfer From Array Of Vertical Tubes At Different Inclinations
Experimental Study of Free Convection Heat Transfer From Array Of Vertical Tubes At Different Inclinations A.Satyanarayana.Reddy 1, Suresh Akella 2, AMK. Prasad 3 1 Associate professor, Mechanical Engineering
More informationCFD Analysis of a butterfly valve in a compressible fluid
CFD Analysis of a butterfly valve in a compressible fluid 1 G.TAMIZHARASI, 2 S.KATHIRESAN 1 Assistant Professor,Professor,Departmentment of Electronics and Instrumentation,Bharath university, chennai.
More informationProf.Dr. EMİNE KILAVUZ CV AND PUBLICATION
Prof.Dr. EMİNE KILAVUZ CV AND PUBLICATION CONTACT INFORMATION Faculty Department Faculty of Economics and Administrative Sciences Economics Sub-Department Economic Development and International Economics
More informationBasics of vehicle aerodynamics
Basics of vehicle aerodynamics Prof. Tamás Lajos Budapest University of Technology and Economics Department of Fluid Mechanics University of Rome La Sapienza 2002 Influence of flow characteristics on the
More informationCURRICULUM VITAE ÖZNUR ÖZDEMİR
CURRICULUM VITAE ÖZNUR ÖZDEMİR Office Address-Akdeniz University, Faculty of Economics and Administrative Sciences, Department of Business Administration, Dumlupinar Boulevard, 07058, Antalya, Turkiye
More informationWhat can I do with a degree in... Engineering
What can I do with a degree in... Engineering The Department of Physics offers a spectrum of courses reflective of both the integral character of physics in the liberal arts curriculum and its essential
More informationBANU SOYLU CONTACT INFO
BANU SOYLU CONTACT INFO Address: Industrial Engineering Department Erciyes University 38039 Kayseri-Turkey Phone: +90-(352)-437-4901 ext: 32456 Fax: +90-(352)-437-5784 e-mail: bsoylu-at-erciyes.edu.tr
More informationCURRICULUM VITAE. 1.Personal data: 2.Education background: Education ( degrees, dates, universities ) : 3.Work experience document:
1.Personal data: CURRICULUM VITAE Name : Teoman Surname: Ayhan Date of birth: 20.08.1945 Birth of place: Uskudar Birth of country: Turkey Nationality: Turkish Republic Marriage status: Married E-mail:
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2013-2014 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October 27,
More informationAnalysis of EU PhD Education and Research. Prof. Dr. Hans G. Sonntag, MF Heidelberg
Analysis of EU PhD Education and Research Prof. Dr. Hans G. Sonntag, MF Heidelberg History of Doctoral Degrees Doctoral degrees as old as universities Universities had the permission to award doctoral
More informationCURRICULUM VITAE. 1. Name Surname: Mehmet Toran 2. Date of Birth: 01.01.1980 3. Academic Degree: Assist.Prof.Dr. 4. Educational Degree:
1. Name Surname: Mehmet Toran 2. Date of Birth: 01.01.1980 3. Academic Degree: Assist.Prof.Dr. 4. Educational Degree: CURRICULUM VITAE University Date B.S Karadeniz Technical University Faculty of Education
More informationAN EXPERIMENTAL STUDY OF EXERGY IN A CORRUGATED PLATE HEAT EXCHANGER
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 11, Nov 2015, pp. 16-22, Article ID: IJMET_06_11_002 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=11
More informationEnergy Audit Consulting Service and Engineering Industry and Trade Limited Company
Energy Audit Consulting Service and Engineering Industry and Trade Limited Company Certified Building and Industrial Energy Manager Training Energy Management System Installation, Implementation, Consulting
More informationWeb-Based Curriculum Development of a Manufacturing Engineering Technology Programme*
Int. J. Engng Ed. Vol. 20, No. 4, pp. 566±577, 2004 0949-149X/91 $3.00+0.00 Printed in Great Britain. # 2004 TEMPUS Publications. Web-Based Curriculum Development of a Manufacturing Engineering Technology
More informationDR AYŞE KÜÇÜKYILMAZ. Imperial College London Personal Robotics Laboratory Department of Electrical and Electronic Engineering SW7 2BT London UK
DR AYŞE KÜÇÜKYILMAZ Imperial College London Personal Robotics Laboratory Department of Electrical and Electronic Engineering SW7 2BT London UK http://home.ku.edu.tr/~akucukyilmaz a.kucukyilmaz@imperial.ac.uk
More informationCalifornia Standards Grades 9 12 Boardworks 2009 Science Contents Standards Mapping
California Standards Grades 912 Boardworks 2009 Science Contents Standards Mapping Earth Sciences Earth s Place in the Universe 1. Astronomy and planetary exploration reveal the solar system s structure,
More informationFinite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals
Finite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals Originally published in 2007 American Society for Engineering Education Conference Proceedings
More informationEssam E. Khalil khalile1@asme.org
AIR-CONDITIONING SYSTEMS DEVELOPMENTS IN HOSPITALS: COMFORT, AIR QUALITY, AND ENERGY UTILIZATION Essam E. Khalil khalile1@asme.org PROFESSOR OF MECHANICAL ENGINEERING, CAIRO UNIVERSITY, EGYPT Abstract
More informationTWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW
TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW Rajesh Khatri 1, 1 M.Tech Scholar, Department of Mechanical Engineering, S.A.T.I., vidisha
More informationNatural Convection. Buoyancy force
Natural Convection In natural convection, the fluid motion occurs by natural means such as buoyancy. Since the fluid velocity associated with natural convection is relatively low, the heat transfer coefficient
More information2. 1999, MPhil. in Accounting. Faculty of Commerce, Cairo University, Egypt.
Last update: CURRICULUM VITAE PERSONAL PROFILE Name: Emad Awadallah Designation: Associate Professor of Accounting Nationality: British Telephone (Office): (+74) 4403-6481 Department: Accounting and Information
More informationBSc (Hons) Construction Management Part-time Course content
BSc (Hons) Construction Management Part-time Course content Year One Year One modules: Architectural Science and Building Engineering Services This module introduces you to the principles underlying the
More informationInstructional Laboratory Apparatuses Designed and Built by Capstone Senior Design Students
Global J. of Engng. Educ., Vol.11, No.1 Published in Australia 2007 UICEE Instructional Laboratory Apparatuses Designed and Built by Capstone Senior Design Students Hosni I. Abu-Mulaweh Department of Engineering,
More informationDr. Muharrem Keskin. - 1996 to 1996: English Course, University of Illinois, Urbana-Champaigne, Illinois/USA.
Last Update: 11 April 2012 Dr. Muharrem Keskin Department of Biosystems Engineering Faculty of Agriculture Mustafa Kemal University Tayfur Sokmen Campus 31040 Antakya, Hatay / Turkey Phone: 90 (326) 2455845
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Evaluations During the 2011-2012 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October
More informationCURRICULUM VITAE. Degree Branch University Graduation Year BSc. Industrial Engineering Çankaya University 2004
ÇİĞDEM DİNÇKAL (PhD) CURRICULUM VITAE Academic Title: Assistant Professor. Work Address: Çankaya University, Department of Civil Engineering, N-A09, Yukarıyurtcu Mahallesi Mimar Sinan Caddesi No:4, 06790,
More informationCURRICULUM VITAE. Position University/Institution Year
Asst. Prof. Dr. Cemali SARI CURRICULUM VITAE Address Akdeniz University Education Faculty E-mail csari@akdeniz.edu.tr Telephone 0902423102082 Fax 0902422261953 1. Education Degree Area University Year
More informationCFD Based Air Flow and Contamination Modeling of Subway Stations
CFD Based Air Flow and Contamination Modeling of Subway Stations Greg Byrne Center for Nonlinear Science, Georgia Institute of Technology Fernando Camelli Center for Computational Fluid Dynamics, George
More informationEnhancement of heat transfer of solar air heater roughened with circular transverse RIB
Enhancement of heat transfer of solar air heater roughened with circular transverse RIB Gurpreet Singh 1, Dr. G. S. Sidhu 2 Lala Lajpat Rai Institute of Engineering and Technology, Moga Punjab, India 1,2
More informationMk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011
Mk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011 Admission to Ph D Programmes 2013-2014 (Starting from January-2014)
More informationHeat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati
Heat Transfer Prof. Dr. Ale Kumar Ghosal Department of Chemical Engineering Indian Institute of Technology, Guwahati Module No. # 04 Convective Heat Transfer Lecture No. # 03 Heat Transfer Correlation
More informationNorwegian University of Science and Technology (NTNU), Department of Energy and Process Engineering, N-7491 Trondheim, Norway
CURRICULUM VITAE (Last updated at March 20, 2015) PERSONAL INFORMATION Name: Vojislav Novakovic Year of birth: 1953 Nationality: Norwegian Position: Professor Address: Phone: +47 73 59 38 68 Fax: +47 73
More informationÖrnektir. CV Cengiz SAYIN. 1.First Name-Last Name. 2. Title Associate Professor. 3. Date of Birth 10.06.1967. 4. Contact Info
1.First Name-Last Name CV Cengiz SAYIN 2. Title Associate 3. Date of Birth 10.06.1967 4. Contact Info a) Address Akdeniz University Faculty of Agriculture ANTALYA / TURKEY b) Phone 0 242 310 24 35 c) Fax
More informationDOKUZ EYLUL UNIVERSITY GRADUATE SCHOOL OF HEALTH SCIENCES NEW CODE OF PRACTICE
DOKUZ EYLUL UNIVERSITY GRADUATE SCHOOL OF HEALTH SCIENCES NEW CODE OF PRACTICE in PhD TRAINING AND ASSESSMENT (Confirmed by the University Senate on March 18, 2015) Important Note: Only the issues discussed
More informationMechanical and Aerospace Engineering Graduate Program. Graduate Student Handbook. Academic Year 2013-2014
Mechanical and Aerospace Engineering Graduate Program Graduate Student Handbook Academic Year 2013-2014 Mechanical and Aerospace Engineering Graduate Program School for Engineering of Matter, Transport
More informationThe IMES Master Programme
The IMES Master Programme The IMES Master Programme is built to reach the main goal of the Master, which is to provide to the students the professional skills required for private or public entities undertaking
More information3. Prescribe boundary conditions at all boundary Zones:
CFD ANALYSIS OF CHANGE IN SHAPE OF SUCTION MANIFOLD TO IMPROVE PERFORMANCE OF THE CENTRIFUGAL PUMP ABSTRACT Mr. Suraj K. Patil PG Student, Department of Mechanical Engineering /BIGCE, Solapur University,
More informationMEHMET AKTAS. Graduate Teaching Assistant - Course Instructor
MEHMET AKTAS Department of Mathematics Phone: 850-339-6130 Florida State University Email: maktas@math.fsu.edu 32306 EDUCATION Florida State University, Tallahassee, Florida (expected) August 2016 Ph.D.,
More informationDifferential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation
Differential Relations for Fluid Flow In this approach, we apply our four basic conservation laws to an infinitesimally small control volume. The differential approach provides point by point details of
More informationHVAC/R Technology AAS Degree
HVAC/R Technology AAS Degree State Submission Mark Wilson, President January 2014 Table of Contents EXECUTIVE SUMMARY... 2 IDENTIFICATION AND DESCRIPTION OF THE PROGRAM... 3 OBJECTIVES AND PURPOSE OF THE
More informationRECENT RESEARCH IN COMPUTATIONAL FLUID MECHANICS
RECENT RESEARCH IN COMPUTATIONAL FLUID MECHANICS Dr. Nor Azwadi bin Che Sidik Faculty of Mechanical Engineering Universiti Teknologi Malaysia 1 OBJECTIVE 1. To inform current research topics in the field
More informationChemical Engineering - CHEN
Auburn University 1 Chemical Engineering - CHEN Courses CHEN 2100 PRINCIPLES OF CHEMICAL ENGINEERING (4) LEC. 3. LAB. 3. Pr. (CHEM 1110 or CHEM 1117 or CHEM 1030) and (MATH 1610 or MATH 1613 or MATH 1617
More informationCollection Policy: Engineering
Collection Policy: Engineering 1. Introduction The Lakehead University Library supports the instructional and research needs of students and faculty working within the Faculty of Engineering. From 1949
More informationComputational Fluid Dynamics in Automotive Applications
Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational
More informationEuropass Curriculum Vitae
Europass Curriculum Vitae Personal information First name / Surname Addresses Telephones Anastasios STAMOU 21 Theagenous Str., 16121 Athens, GREECE (home). 5 Iroon Polytechniou Str., 15780 Zografou, Athens,
More informationDepartment of Mechanical Engineering
Department of Mechanical Engineering ADMINISTRATIVE OFFICER Jianren Zhou, Interim Department Head, Mechanical Engineering FACULTY Paul O. Biney, Mechanical Engineering Ronald D. Boyd, Mechanical Engineering
More informationComparison of Heat Transfer between a Helical and Straight Tube Heat Exchanger
International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 1 (2013), pp. 33-40 International Research Publication House http://www.irphouse.com Comparison of Heat Transfer
More informationGraduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
More informationGraduate Programs in Mechanical and Aerospace Engineering
Graduate Programs in Mechanical and Aerospace Engineering Space System Engineering Aerodynamics & Computational Fluid Dynamics (CFD) Aerospace Structures and materials Dynamics, Vibration and Controls
More informationApplicable to students admitted to the curriculum in 2014-2015 MSC(ENG) IN MECHANICAL ENGINEERING
Applicable to students admitted to the curriculum in 2014-2015 MSC(ENG) IN MECHANICAL ENGINEERING Objectives The aim of the curriculum is to provide advanced postgraduate education in the fields of energy
More informationAn experimental investigation of heat transfer of free convection on triangular fins in order to optimize the arrangement of fins
International Journal of Science, Technology and Society 2014; 2(5: 152-160 Published online September 30, 2014 (http://www.sciencepublishinggroup.com/j/ijsts doi: 10.11648/j.ijsts.20140205.18 ISSN: 2330-7412
More informatione-mail: ozgur.baran@tedu.edu.tr GSM:0538 387 1973
ÖZGÜR U GRAŞ BARAN e-mail: ozgur.baran@tedu.edu.tr GSM:0538 387 1973 Education 2002 05 VRIJE UNIVERSITEIT BRUSSELS DEPARTMENT OF MECHANICAL ENGINEERING FLUID MECHANICS RESEARCH GROUP Doctor of Philosophy
More informationTATA Scunthorpe Queen Anne- taphole suction hood optimisation by CFD simulation and physical modelling
1 TATA Scunthorpe Queen Anne- taphole suction hood optimisation by CFD simulation and physical modelling Author(s) Name(s) and Affiliations(s) Bob PETERS, Paul Wurth S.A. Luxembourg, Jean-Paul SIMOES,
More informationExperimental Study On Heat Transfer Enhancement In A Circular Tube Fitted With U -Cut And V -Cut Twisted Tape Insert
Experimental Study On Heat Transfer Enhancement In A Circular Tube Fitted With U -Cut And V -Cut Twisted Tape Insert Premkumar M Abstract Experimental investigation of heat transfer and Reynolds number
More information