TEAM2014 CONFERENCEPROGRAM TECHNIQUE,EDUCATION,AGRICULTURE&MANAGEMENT. 6thInternational ScientificandExpertConference

Transcription

1 TEAM TECHNIQUE,EDUCATION,AGRICULTURE&MANAGEMENT 2014 CONFERENCEPROGRAM TEAM2014 6thInternational ScientificandExpertConference oftheinternationalteamsociety November Kecskemét,Hungary

2

3 6th International Scientific and Expert Conference of the International TEAM Society Janos Bolyai Lecture Hall Plenary Session 9:00 Chair: Ákos Tóth Gernot Spiegelberg - Future trends in e-mobility and smart grid technologies in Europe 9:40 Antun Stoic, Tomislav Palatinuš, Borut Kosec, Miroslav Duspara and Marija Stoić. The effects of Life cycle management of abrasives on sustainable WJ cutting 10:20 Coffee break 10:40 Krunoslav Mirosavljević, Davor Požežanac-Hajić, Slavica Antunović and Teuta Benkovic-Lačić. Modern applications of UV-VIS spectroscopy in agriculture 11:20 György Várallyay. Environmental aspects of soil management and moisture control November Kecskemét, Hungary

4 6th International Scientific and Expert Conference of the International TEAM Society AGRICULTURE AND HORTICULTURE (4/212) Session AGRHORT1 13:00 Chair: Monika Marković Monika Marković, Marko Josipović, Jasna Šoštarić, Dragutin Petošić, Ivan Šimunić and Vladimir Zebec. Implementation of irrigation scheduling based on monitoring of soil moisture content in extreme weather conditions 13:20 13:40 14:00 Andrija Alković, Teuta Benković-Lačić, Robert Benkovic and Krunoslav Mirosavljević. The influence of pruning on vine yield (Vitis vinifera L.) Ferenc Baglyas, Endre Pölös and Csaba Szabó. The impact of different rooting media in the propagation of some grape varieties Bozica Japundzic-Palenkic, Ivana Vukoja, Matija Japundžić and Natasa Romanjek - Fajdetic. Pea (Pisum sativum L.) seedlings properties under influence of different temperatures 14:20 Coffee break Session AGRHORT1 14:50 Chair: Ferenc Baglyas Marko Martinović, Tomislav Ćosić and Ivica Lacković. Recycling and disposal of electronic waste 15:10 15:30 Viktor József Vojnich, Endre Pölös and András Palkovics. Biological plant protection of Indian tobacco (Lobelia inflata L.) Viktor József Vojnich, Endre Pölös, Judit Pető, Attila Hüvely and András Palkovics. The total alkaloid production of Indian tobacco (Lobelia inflata L.) in open field conditions Kecskemét, Hungary November

5 6th International Scientific and Expert Conference of the International TEAM Society COMPUTER AND INFORMATION TECHNOLOGY (4/316) Session COMP1 13:00 László Gyöngyösi: Quantum computing 13:40 Peter Nagy, Péter Tasnádi: Interaction-free measurements 14:00 Chair: József Klebniczki Marko Martinović, Dino Lovaković, Tomislav Ćosić : Network security issues regard to OSI reference model layers 14:20 Coffee break Session COMP2 Chair: Tibor Vajnai Istvan Pinter, Lorant Kovacs, Andras Olah, Rajmund Drenyovszky, Kalman Tornai 14:50 and David Tisza. On-line change point detection in household's electricity power consumption data series for smart grid applications Vedran Novoselac and Zlatko Pavić. Outlier Detection in Experimental Data Using 15:10 a Modified Expectation Maximization Algorithm 15:30 Zlatko Pavić and Vedran Novoselac. Jensen's and Hermite-Hadamard's inequality Zlatko Pavić, Maja Čuletić Čondrić and Veljka Žugec. Power and Logarithmic 15:50 Means 16:10 Coffee break Session COMP3 Chair: Ambrus Kőházi-Kis 16:40 Bence Koszteczky and Gyula Simon. Intrusion detection system with sensor networks 17:00 Gábor Kátai-Urbán, Ferenc Koszna and Zoltan Megyesi. Omnidirectional camera calibration 17:20 Rajmund Drenyovszki, Lorant Kovacs, Krisztian Barsony and Bence Csak. GPS based vehicle trajectory prediction and error analysis 17:40 Zénó Dömötör, Ambrus Kőházi-Kis and Bence Csák. Automatic Li-ion battery test system 18:00 Coffee break Session COMP4 Chair: Rafael Alvarez Gil József Osztényi, Rafael Alvarez Gil, Kálmán Bolla, Edit Csizmás, Csaba Fábián, 18:15 Lóránt Kovács, Tamás Kovács, Krisztián Medgyes and Tibor Vajnai. The parameter estimation of the link performance functions 18:35 Zlatko Pavić. The Significance of the Convex Combination Center 18:55 Elvira Antal. Optimization Questions in BitTorrent Communities 19:10 Zsolt Csaba Johanyák, Piroska Gyöngyi Ailer, László Göcs. A Simple Fuzzy Control Design for Series Hybrid Electric Vehicle November Kecskemét, Hungary

6 EDUCATION (4/201) 6th International Scientific and Expert Conference of the International TEAM Society Session EDU1 Chair: Mária Hercz 13:00 Ágnes Maródi, István Benedekfi, Iván Devosa and Zsuzsa Buzas. Teaching and learning music with the aid of digital technology 13:20 Hrvoje Sivrić, Nebojša Zagorac and Kristijan Marić. The affect of selected motor abilities on the results in the athletic discipline running long jump 13:40 Ágnes Maródi, Ivan Devosa, Zsuzsa Buzas and István Benedekfi. ICT tool for education of European citizenship 14:00 Zoltán Senkei-Kis and Koltói Lilla. Is it legal or illegal to use torrents? Views of students of Library Science about downloading 14:20 Coffee break Session EDU2 14:50 Chair: Veronika Szinger Mária Hercz, Lilla Koltói, Róbert Pap-Szigeti and Erika Török. Assessing Competencies of Freshmen: an On-line Measurement in the College 15:10 Maria Hercz, Lilla Koltói and Róbert Rigó. Competencies for the success of students learning in Dual Training System: the firms voice 15:30 Erika Török and Zsuzsanna Kovács. Challenges and opportunities in the dual training model at Kecskemét College 15:50 Mihály Görbe. Establishing new course for the education of sensorics at the GAMF faculty of Kecskemét College 16:10 Coffee break Session EDU3 Chair: Éva Ujlakyné Szűcs Ildikó Szabó and Veronika Szinger Action Research-Based Innovation in 16:40 Teachers Professional Development at Kecskemét College Teacher Training Faculty 17:00 Ildikó Szabó Dr. and Sarolta Lipóczi-Csabai Dr. Developing, implementing and piloting interactive teaching resources in a European context 17:20 Ágnes Horváth. Value ranking as a special task for students 17:40 Coffee break Session EDU4 Chair: Ildikó Szabó Éva Ujlakyné Szűcs. College students'difficulties in developing their foreign 18:00 language competences 18:20 Judit Hardi. Metacognitive strategies in EFL vocabulary learning 18:40 Zsigmond Istvan. Metacognitive methods for writing development Kecskemét, Hungary November

7 6th International Scientific and Expert Conference of the International TEAM Society MANAGEMENT (4/313) Session MAN1 13:00 Milan Stanić and Ivana Martinović. Calculation of cost fixed assets Chair: Ákos Tóth 13:20 Akos Toth. The Financial Crisis and its Effect on the Quality of Governance and the Financing of the Cultural Sector 13:40 Snežana Kirin, Tatjana Janovac, Aleksandar Sedmak and Branislav Jakić. Research of Knowledge and Skills Effects on Achievement of Employees Aims 14:00 Sanja Knežević and Maja Pelivan. New Product- The Key Factor Of Companies' Development 14:20 Coffee break Session MAN2 Chair: Michael Schwandt 14:50 Michael Schwandt. Statistical Analysis of Employee s Knowledge about Risk Management A Comparison of Three Central Eastern European Countries 15:10 Árpád Ferencz and Márta Nótári. Price-sensitive examinations of traditional products 15:30 Árpád Ferencz and Márta Nótári. Livelihood of economic assessment in rural areas 15:50 Coffee break Session MAN3 Chair: Tibor Ferenczy Anita Kulaš and Lucija Kraljić. The importance of investing in education of human 16:20 resources in management 16:40 Tibor Ferenczy. Possibilities of determining the value of urban green areas November Kecskemét, Hungary

8 6th International Scientific and Expert Conference of the International TEAM Society MECHANICAL ENGINEERING (4/315) Session ME1 Chair: András Szabó, Márton Máté 13:00 Csaba Gyenge. Main results of 50 years researches in the field of gear transmissions 13:20 Márton Máté. The micro-geometric model of the toothflanks of a cylindrical gear with archimedean spiral shaped toothline 13:40 Saurabh Dewangan, Somnath Chattopadhyaya and Sergej Hloch. Analysis of wear mechanism in conical pick for coal cutting 14:00 Antal Fodor and Pál Boza. The effect of the parametric CNC programming for the drilling tool life 14:20 Coffee break Session ME2 14:50 Chair: Csaba Gyenge, János Kodácsy János Kodácsy and János Líska. Roller Burnishing and Deburring Using Apparatus with Permanent Magnet János Kodácsy, János Líska and Attila Zólyomi. Machinebility of the Ni-based 15:10 superalloys by end milling Tomislav Šarić, Danijela Pezer, Goran Šimunović and Roberto Lujić. Tool path 15:30 optimization of drilling sequence using genetic algorithm Dino Bučević-Keran, Marko Kuna, Dražan Kozak and Josip Sertić. Determination 15:50 of the critical position during the assembly of the boiler exchanger package due to the stresses of the auxiliary frame structure 16:10 Coffee break Session ME3 Chair: Dražan Kozak, Pál Lukács 16:40 Pál Lukács. Recycling possibilities of process residues from End of Life Vehicles Stanislav Kotšmíd, Ján Marienčík, Pavel Beňo, Marián Minárik, Dražan Kozak and 17:00 Pejo Konjatić. Accuracy in the Geometrical Characteristics Reduction Method of Step Shaft at Deflection Computing Nedeljko Vukojević, Fuad Hadžikadunić and Nenad Gubeljak. Diagnostics and 17:20 analysis of the influence of cracks on the integrity of thick-walled pressure vessels Maja Čuletić Čondrić, Marija Stoić, Stipo Duspara and Slavko Zorica. Measuring 17:40 by using 3D control equipment 18:00 Jolanta Królczyk: Morphology of cereal food grains Kecskemét, Hungary November

9 6th International Scientific and Expert Conference of the International TEAM Society MECHANICAL ENGINEERING (4/311) Session ME4 Chair: József Danyi, Somnath Chatopadhyaya 13:00 József Danyi, Bertalan Kecskés and Ferenc Végvári. Evaluation of Springback of the Tailor-Welded Blanks in V Bending Process 13:20 Peter Šugár, Jana Šugárová and Ján Petrovič. Study of metal spun parts surface layers topography Zoltan Weltsch, József Hlinka, Ágnes Cziráki, Zsolt Fogarassy, Antal Lovas, Miklós 13:40 Berczeli, Géza Tichy and Attila Tóth. Wetting features of Ag-Sn liquids and the phase structure in solidified state 14:00 József Hlinka, Zoltán Weltsch and Artúr Acél. Effects of multiple reflows on wettability in Sn Ag-Cu lead-free solder alloys 14:20 Coffee break Session ME5 Chair: Peter Šugár, Károly Belina Mario Šokac, Željko Santoši, Tatjana Puškar, Siniša Mirković, Mirko Soković and 14:50 Igor Budak. Application of different segmentation approaches on CB-CT images for the reconstruction of 3D model of mandible 15:10 Zlatko Pavić and Ana Bodlović. Analytical Study of Stress 15:30 Ratnesh Kumar. Experimental and theoretical investigation of effect of process parameter on temperature development during friction stir welding 15:50 József Danyi, Ferenc Végvári, Gábor Béres and Bertalan Kecskés. Tube expanding by elastic medium 16:10 Coffee break Session ME6 Chair: Milan Marônek, Ivan Samardžič 16:40 Ravi Kumar, Somnath Chattopadhyaya, Aniruddha Ghosh and Pedro Vilaca. Thermal modelling and analysis of fsw: a review 17:00 József Danyi, Ferenc Végvári, Gábor Béres and Bertalan Kecskés. Deep- Drawability of Tailor-Welded Steel Sheets 17:20 Danijela Živojinović, Horia Dascau, Aleksandar Sedmak and Aleksandar Grbović. Integrity assessment of a structure made of two fsw t-welds Zsolt Dugár, Péter Barkóczy, Gábor Béres, Dávid Kis and Gergő Antalicz. 17:40 Determination of recrystallization temperature of varying degrees formed aluminium, by DMTA technique November Kecskemét, Hungary

10 POSTER SESSION (4/Floor 3) 6th International Scientific and Expert Conference of the International TEAM Society Ljiljana Božić-Ostojić, Slavica Antunović, Branimir Vujčić and Mirjana Martić. Cognisation and agricultural producers opinion on new law regulations in the field of plant protection in eastern Croatia Zsuzsa Turiné Farkas and Dezső Kovács. Propagation of taxus baccata Zsuzsa Turiné Farkas and Zoltán Pádár. Analysis of growth and age of urban mature trees Zsuzsanna Tóthné Taskovics, Judit Pető, Attila Hüvely and András Kovács. The effect of some plant conditioning materials on the quality and quantity of green pepper Bojan Stipešević, Bojana Brozović, Danijel Jug, Irena Jug, Ljubica Ranogajec and Davor Šego. Economic comparison of different cropping systems for Niger (Guizotia abyssinica) in Croatia Anikó Czinege. The study of the yield of the rootstock and plum variety combinations Anikó Czinege. The study of the vigour of the rootstock and plum variety combinations Judit Pető, Attila Hüvely and Imre Cserni. Plantation programs and their observations in the South-eastern Hungarian region Kecskés-Nagy Eleonóra and Sembery Péter. Reduction of DON-toxin content in wheat Blanka Buzetzky. Soil moisture monitoring between the Danube and the Tisza river Csaba Fábián, Edit Csizmás and Tibor Vajnai. Modeling uncertainty for stochastic optimisation Attila Végh. On free and nonfree Dirichlet-Voronoi cells Kálmán Bolla, Tamás Kovács and Gábor Fazekas. Trajectory Building Method for Autonomous Mobile Robots Rafael Pedro Alvarez Gil. Application of Fuzzy Petri Nets in the Specification of Adaptive Web-based Systems. Dr.Sc.Stanislav Nakić. Has the value added tax been necessary? Stanislav Nakić. Image as a component of career development of a manager Kecskemét, Hungary November

11 6th International Scientific and Expert Conference of the International TEAM Society POSTER SESSION (4/Floor 3) Ivona Blažević, Jelena Vuković and Marija Tokić. Comparative analysis of selected generating and receiving markets of organized trips in europe Andreja Katolik, Jelena Vuković and Zvonimir Jurković. Analysis of tourist markets of organized trips in Croatia - paper Lena Duspara and Ana Čalušić. Woman enterpreneurship in Croatia Maja Vretenar Cobović, Mirko Cobović and Sanja Tumbas. Analysis of Internet banking in practice of Croatian banks Anita Kedačić and Ivana Mendeš. Human Resources as a Basis of Hospital Care Petar Kurečić, Lukša Lulić and Tomislav Ivančević. The Influence of States Dependence on Natural Resources Exploitation on GDP and GNI per capita: A Comparative Study Visnja Bartolovic and Dajana Dzeba. The representation of business ethic in the study programs at higher education institutions in the Republic of Croatia Milan Marônek, Jozef Bárta, Ladislav Morovič and Jozef Ertel. Utilisation of optical 3D scanning methods in measurement of weld joint deformations Jozef Bárta, Milan Marônek, Miroslav Sahul and Jozef Ertel. Influence of laser beam welding parameters on weld joints microstructure of duplex steel Katalin Líska, János Líska and Roland Sándor. Investigation possibilities of delamination at drilling of composite materials Katarina Knežević, Mladen Bošnjaković, Ivica Lacković and Igor Tidlačka. Spending ball or roller bearings depending on how the rotation and shape of the load Tomislav Baskaric, Mato Kokanovic, Drazan Kozak, Todor Ergic and Zeljko Ivandic. Effect of temperature changes on the function of the electric guitar Zdenko Cerin, Darko Damjanovic, Drazan Kozak and Zeljko Ivandic. Analysis of wind influence to static stability of the eave framework Dejan Marić, Antonio Ćavar, Željko Ivandić, Dražan Kozak and Ivan Samardžić. Application of vibro methods in practice for reduction of residual stresses Pero Raos, Josip Stojsic and Ante Pranić. Using of simulation programs for the injection molding Pejo Konjatić, Filip Šakić, Dražan Kozak and Pavel Beňo. Influence of Geometry of Pressure Vessel Nozzle Connection on Stress Intensity Factor November Kecskemét, Hungary