How To Make A Car
|
|
- Susan Walton
- 3 years ago
- Views:
Transcription
1
2
3
4 HİDROLİK ATÖLYE PRESİ HYDRAULIC WORKSHOP PRESS HD/H-30 TON Manuel HD/H-20 TON Manuel HD/M/H/Mov 30 TON Motorlu - Kollu - Gezer Silindirli Motor and Hand Operated with Movable Cylinder TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATION Kapasite Capacity HD. 20 Ton HD. 30 Ton HD.30 Ton Kollu Manuel Kollu Manuel Motorlu Motor Opedated A (mm) B (mm) C (mm) D (mm) E (mm) H (mm) Stroke (mm) Motor (hp.) Pompa/Pump (Lt.) Ağırlık/Weight (kg.) İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size.
5 HİDROLİK ATÖLYE PRESİ HYDRAULIC WORKSHOP PRESS HD./60 TON M/H/Mov HD./80 TON M/H/Mov Motorlu - Kollu - Gezer Silindirli Motor - Hand Operated - Movable Cylinder TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATION Kapasite Capacity HD. 60 Ton HD. 80 Ton HD.100 Ton Motorlu Motor Opedated Motorlu Motor Opedated Motorlu Motor Opedated A (mm) B (mm) C (mm) D (mm) E (mm) H (mm) Stroke (mm) Motor (hp.) Pompa/Pump (Lt.) Ağırlık/Weight (kg.) HD./100 TON M/H/Mov İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 3
6 HİDROLİK ATÖLYE PRESİ HYDRAULIC WORKSHOP PRESS HD-160 TON M/H/Mov Motorlu - Kollu - Gezer Silindirli Motor - Hand Operated - Movable Cylinder HD-120 TON M/H/Mov HD-180 TON M/H/Mov TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATION Kapasite Capacity HD. 120 Ton HD. 160 Ton HD.180 Ton Motorlu Motor Opedated Motorlu Motor Opedated Motorlu Motor Opedated A (mm) B (mm) C (mm) D (mm) E (mm) H (mm) Stroke (mm) Motor (hp.) Pompa/Pump (Lt.) Ağırlık/Weight (kg.) İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size.
7 HİDROLİK ATÖLYE PRESİ HYDRAULIC WORKSHOP PRESS HD-250 TON M/Mov HD-200 TON M/Mov Motorlu - Gezer Silindirli Motor - Operated, Movable Cylinder HD-100 TON M/H/Mov KAPASİTE / CAPACITY (TON) S 100-W 120-S 120-W A Yükseklik / Height (mm) B Ayak Boyu / Base Lenght (mm) C Pres Genişliği / Press Wideness (mm) D İki Sütun Arası / Between Two Columns (mm) E İki Sütun Arası (En) / Between Two Columns (Width) (mm) F Sütun En / Column Width (mm) G Sütun Kalınlığı / Column Thickness (mm) H İş Alma Kapasitesi / Working Capacity (mm) Piston Stroku / Piston Stroke (mm) Hidrolik Pompa / Hydraulic Pump (lt) 6,5 3,5 3, , Motor Gücü / Motor Power (hp) ,5 5,5 5,5 5,5 7, Toplam Ağırlığı / Total Weight (kg) İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 5
8 HİDROLİK ATÖLYE PRESİ HYDRAULIC WORKSHOP PRESS HD-300 TON HD-500 TON M/Hyd. Mov. Cyl. KAPASİTE / CAPACITY (TON) A Yükseklik / Height (mm) B Ayak Boyu / Base Lenght (mm) C Pres Genişliği / Press Wideness (mm) D İki Sütun Arası / Between Two Columns (mm) E İki Sütun Arası (En) / Between Two Columns (Width) (mm) F Sütun En / Column Width (mm) G Sütun Kalınlığı / Column Thickness (mm) H İş Alma Kapasitesi / Working Capacity (mm) Piston Stroku / Piston Stroke (mm) HD/P-400 TON M/Hyd. Mov. Cyl. Platine Şase Plate Chassis Hidrolik Gezer Silindir Moving Cylinder by Hydraulic Hidrolik Pompa / Hydraulic Pump (lt) Motor Gücü / Motor Power (hp) Toplam Ağırlığı / Total Weight (kg) İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size.
9 ÖZEL TİP ATÖLYE PRESLERİ SPECIAL TYPE WORKSHOP PRESSES Hidrolik Gezer Silindir Moving Cylinder by Hydraulic HD-600 TON M/Hyd. Mov. Cyl. Hyd. Adjustable Mangle HD-300 TON Çift Silindirli ve Tablalı Pres Double Cylinder Press with Table HD-200 TON Atölye Tipi Sıvama Presi Workshop Type Deep Drawing Press İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 7
10 H TİPİ TYPE HİDROLİK SIVAMA ve ÜTÜLEME PRESİ HYDRAULIC DEEP DRAWING and SINGLE ACTION PRESS 300 TON OTOMATİK ÜTÜLEME PRESİ AUTOMATIC SINGLE ACTION PRESS 8 İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size.
11 HİDROLİK SIVAMA PRESİ HYDRAULIC DEEP DRAWİNG PRESS 1000 TON OTOMATİK / AUTOMATIC PLC Control System Touch Screen Table Size 2400 x 1200 mm Main Stroke 1000 Ton = 800 mm Cushion Stroke 500 Ton = 250 mm İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 9
12 HİDROLİK KOLONLU PRESS HYDRAULIC COLUMN PRESS 250 TON OTOMATİK PLC KONTROLLÜ ÜTÜLEME PRESİ AUTOMATIC PLC CONTROL WITH TOUCH SCREEN - SINGLE ACTION PRESS 200 TON OTOMATİK SIVAMA PRESİ AUTOMATIC DEEP DRAWING PRESS 250 TON OTOMATİK ÜTÜLEME PRESİ AUTOMATIC SINGLE ACTION PRESS 10 İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size.
13 TON HİDROLİK C - TİPİ PRESS TONS HYDRAULIC C - TYPE PRESS TON OTOMATİK BÜKÜM PRESİ AUTOMATIC BENDING PRESS TON TABLALI OTOMATİK ÜTÜLEME PRESİ AUTOMATIC with TABLE SINGLE ACTION PRESS TEKNİK ÖZELLİKLER / TECHNICAL DETAILS Kapasite / Capacity 30 TON 60 TON 100 TON 150 TON Tabla Ebatı / Table Dimension 500 x x x x x x x x 600 Motor (hp) Pompa / Pump (Lt.) Stroke İş alma Yüksekliği / Workings Height Silindir / Cylinder (Ø) İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 11
14 160 TON HİDROLİK BÜKÜM PRESİ 160 TON HYDRAULIC BENDING PRESS TEKNİK ÖZELLİKLER / TECHNICAL DETAILS 12 Silindir / Cylinder Ø 220 Motor / Motor 4 kw. 5.5 Hp. Pompa / Pump 11 Litre Liter Büküm Boyu / Bending Lenght 1200 mm Büküm Kalınlığı / Bending Thickess 7 mm Strok 400 mm
15 200 TON HİDROLİK BÜKÜM PRESİ 200 TON HYDRAULIC BENDING PRESS OTOMATİK AUTOMATIC TEKNİK ÖZELLİKLER / TECHNICAL DETAILS Silindir / Cylinder Motor / Motor Pompa / Pump Büküm Boyu / Bending Lenght Büküm Kalınlığı / Bending Thickess Strok Ø 200x2 11 kw. 15 Hp. 33 Litre Liter Tandhem 2000 mm 7mm 400mm 13
16 14 İŞ MAKİNALARI İÇİN TAMİR & BAKIM EKİPMANLARI REPAIR & MAINTENANCE EQUIPMENTS FOR HEAVY CONSTRUCTION
17 ÖZEL AMAÇLI SICAK KAUCUK PRESİ SPECIAL TYPE HOT RUBBER PRESS İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 15
18 HİDROLİK HORTUM SIKMA PRESİ HYDRAULIC HOSE CRIMPING PRESS Teknik Özellikler / Technical Details Hortum Sıkma Presi /Hose Crimping Press HS1 Maksimum Hortum Kalınlığı / Max Hydraulic Hose 2 Maksimum Sıkma / Max Crimping 105 mm Sıkma / Saat / Swaging / Hour 650 Kalıp Açıklığı /Dies Opening + 22 Standart Voltaj / Standart Voltage V 3 phrase Ölçü / Dimension 450 x 650 x 950 mm Ağırlık / Weight 265 kgs Teknik Özellikler / Technical Details Hortum Sıkma Presi Hose Crimping Press Maksimum Hortum Kalınlığı Max Hydraulic Hose Maksimum Sıkma Max Crimping Sıkma / Saat Swaging / Hour Standart Voltaj Standart Voltage Ölçü Dimension Ağırlık Weight HS mm V 3 phrase 1200x600x1200 mm 700 kgs 16
19 BRONŞ BASMA VE ÇEKME PRESLERİ BROUNCH PRESSES İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 17
20 HİDROLİK SAC DESEN PRESİ HYDRAULIC SHEET FORMING PRESS 500 TON OTOMATİK / AUTOMATIC 300 TON MANUEL / MOTOR OPERATED TEKNİK ÖZELLİKLER / TECHNICAL DETAILS Kapasite / Capacity 200 TON 300 TON 500 TON Tabla Ebatı / Table Dimension 1400 x x x 700 Motor ( hp. ) Pompa Stroke İş alma boyu Silindir / Cylinder mm. ( Ø ) 2 x x x 290 OTOMATİK : Çift el veya ayak butonu, Işık Bariyeri, Siviç AUTOMATIC : Double Hand or Food Pedal, Switch, Light Barrier 200 TON OTOMATİK / AUTOMATIC 18 İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size.
21 SMA-280 TAM TOTOMATİK ŞERİT TESTERE FULL AUTOMATIC BAND SAWING MACHINE OTOMATİK AUTOMATIC TEKNİK ÖZELLİKLER / TECHNICAL DETAILS Ana Motor /Main Motor Sürücü Motor / Driver Motor Soğutma Suyu Motor / Cooling Water Motor Hidrolik Pompa / Hydraulic Pump Lama Kesim Kapasitesi / Flat Cutting Capacity Yuvarlak Kesme Kapasitesi / Round Cutting Capacity Kare Kesme Kapasitesi / Square Cutting Capacity Şerit Ölçüsü / Blade Size Ölçüler / Overall Dimensions Ağırlık / Weight 4 KW 5.5 HP 0.25 KW 0.09 KW 2.2 LT 280 x 300 mm 280 mm 280 x 280 mm 3660 x 27 x 0.9 mm 1150x1800x 320 mm (LxWxH) 550 KGS 19
22 ŞERİT TESTERE SMA-500 BAND SAWING MACHINE TEKNİK ÖZELLİKLER / TECHNICAL SPESICICATION Motor / Motor 5.5 kw hp Pompa / Pump Kesim Kapasitesi / Cutting Capacity 2.2 Litre Ø 500mm Kesme Açısı / Angle of Relief 45º - 90º Şerit Ölçüsü / Blade Size Ölçüler / Dimensions Ağırlık / Weight 5310 mm x 27mm x 0.9mm x 3/4 2500mm x 1600mm mm En / W Boy / L Yükseklik / H 800 kg YARI OTOMATİK SEMİ AUTOMATIC 20
23 ÖZEL AMAÇLI PRESLER SPECIAL TYPE PRESSES YAĞ ÇIKARMA PRESİ OIL EXTRUDING PRESS TUZ SALT TUZ BASMA PRESİ SALT PRESS İstenilen her ölçüde pres imalatı yapılır. It is provide press in every size. 21
24 HİDROLİK PROFİL BÜKÜM PRESİ HYDRAULIC CAMBERING PRESS CNC KONTROL SYSTEM TEKNİK ÖZELLİKLER / TECHNICAL DETAILS Tonaj - Capacity Pompa - Pump Motor İleri Hızı - Forward Speed Geri Dönüş Hızı - Return Speed Strok - Stroke İş Alma Kapasitesi - Working Capacity Arka Dayama Boyu - Back Support Lenght 250 Ton ( 220 Barda) Kt6c-14 Paletli Pompa - Palettice Pump 22 Kw 9 Mm/sn 23 Mm/sn 900 Mm 900 Mm 5000mm 22 Dayamalar Elektro Mıknatıs Sistemlidir. Supports Are With Elctromagnets System. Dayama Hareketleri Servo Motor İle Sağlanmaktadır. Moving Of Support Is Provided With Servo Motor Sistem Cnc Kontrollü Olup Programlama Yapilabilir. System Is With Cnc Control And Programming Can Be Done. Malzeme İlerletme İçin Hareket Sistemi Uzaktan Kumanda Sistemli Olarak Sağlanmaktadır. Mowing System Is Provided With Remote Control For Forwarding Of Material.
25 HURDA BALYA PRESİ SCRAP BALLING PRESS BİRKET PRESİ (Talaş Sıkıştırma) BRIQUET PRESS (For Swarf) 23
26 HİDROLİK KOMBİNE MAKAS HYDRAULIC IRONWORKER HDK-60 HİDROLİK DELME MAKİNASI HYDRAULIC PUNCING MACHINE HDK-90 Otomatik Tutucu Automatic Holder HDK
27 HİDROLİK TUTUCU HYDRAULIC HOLDER TEKNİK PARAMETRE/TECHNICAL PARAMETER Tip/Type HDK-60 HDK-90 HDK-115 HDK-140 HDK-180 HDK-250 Kapasite/Capacity(Ton) 60T 90T 110T 140T 180T 250T Max. Saç kesim kalınlığı Max. Shearing Thickness of Steel Plates (mm) Kesme açısı/angle of Shearing Lama Kesme Boyu / Flat Bar Catting (H*W) (mm) 16x250 20x330 25x330 30x355 35x400 40x400 Lama Kesme Boyu / Flat Bar Catting (H*W) (mm) 8x400 10x480 16x600 20x600 25x700 30x750 Strok Boyu/Ram Stroke (mm) Strok Sayısı (dak.)/number of Stroke (times/min) Boğaz Derinliği/Throat (mm) Delme Kalınlığı/Punching Thickness (mm) Max. - Delme çapı/max. Diameter of Punching (mm) Ana Motor gücü/main Motor Power (kw) Dış Ölçüler/Overall Dimension (LxWxH) mm 1650x800x x900x x980x x1060x x1240x x1440x2450 Ağırlık/Weight (kg) Profil Profile Yuvarlak Round Bar Köşebent Square Bar Eşit Açı/Equal Angle 900 Lama / 900 Shearing 450 Lama / 450 Shearing Profil Jojst Kanal Channel MODEL HDK x40 120x120x12 70x70x8 126x74x5 126x53x5.5 HDK x45 140x140x12 70x70x10 160x86x6 160x60x6.5 HDK x50 160x160x14 80x80x7 200x102x9 200x75x9 HDK x55 180x180x16 80x80x10 280x124x x86x11.5 HDK x60 200x200x18 100x100x10 300x126x11 300x89x11.5 HDK x65 200x200x20 120x120x10 320x130x10 320x92x12 25
28 1. Organize Sanayi İstikamet Cd. No: KONYA / TÜRKİYE Tel: Fax: info@hidroliksan.com
How To Use A Hyd125
1981 yılında kurulan BİRLİKSAN, Türkiye nin önde gelen MEKANİK, HİDROLİK SAC ve DEMİR KESME MAKASLARI üreticilerinden birisidir. Üretiminin %85 lik kısmını ihraç eden firmamız, bünyesindeki BİRLİKSAN DIŞ
More informationUNIT 6. w w w. e g e n m a k i n a. c o m. t r
UNIT 6 w w w. e g e n m a k i n a. c o m. t r 02 Teknik Özellikler / Specifications Bant kalýnlýðý Ýþ parçasý kalýnlýðý Ýþ parçasý geniþliði (min) Çalýþma hýzý Çalýþma yüksekliði Kazan hacmi (max) Hava
More informationCDCS P81 CDCS PY81. CDCH P Serisi
ÝÇÝNDEKÝLER INDEX CDCS P Serisi Arkadan volanlý C tipi eksantrik pres ( Kýzaklý) Back sided C type eccentric press ( guide ram) Serisi CDCS P81 Arkadan volanlý C tipi eksantrik pres ( 8 Kýzaklý) Back sided
More informationSHRINK AMBALAJ MAKÝNALARI
YM 630 YM 620 YM 650 YM 150 YM 120 YM 600 YM 590 YM 400 YM 610 YM 580 YM 300 YM 310 YM 500 YM 5000 YM 510 YM 512 SHRINK AMBALAJ MAKÝNALARI 4. ESENÞEHÝR MAH. YAKUT SOKAK NO.34 Y.DUDULLU - ÜMRANÝYE / ÝSTANBUL
More informationTam Otomatik Halı Yıkama Makinası. /full automatic carpet washing machine
Tam Otomatik Halı Yıkama Makinası /full automatic carpet washing machine TAM OTOMATİK HALI YIKAMA MAKİNESİ X2425 X2430 X2435 X2442 FULL AUTOMATIC CARPET WASHING MACHINE Çalışma Alanı (Metre) 2.5 3.0 3.5
More information[ATALAY 76-2000 WIRE-LINE SONDAJ MAKİNESİ] [ATALAY 76-2000 WIRE-LINE EXPLORATION DRILL RIGS] TEKNİK DÖKÜMAN / TECHNICAL DOCUMANTATION
[ATALAY 76-2000 WIRE-LINE SONDAJ MAKİNESİ] [ATALAY 76-2000 WIRE-LINE EXPLORATION DRILL RIGS] TEKNİK DÖKÜMAN / TECHNICAL DOCUMANTATION -TEKNİK ÖZELLİKLER -TECHNICAL SPECIFICATIONS - DELGİ KAPASİTESİ / DRILLING
More information[ATALAY 76-1500 WIRE-LINE SONDAJ MAKİNESİ] [ATALAY 76-1500 WIRE-LINE EXPLORATION DRILL RIGS] TEKNİK DÖKÜMAN / TECHNICAL DOCUMANTATION
[ATALAY 76-1500 WIRE-LINE SONDAJ MAKİNESİ] [ATALAY 76-1500 WIRE-LINE EXPLORATION DRILL RIGS] TEKNİK DÖKÜMAN / TECHNICAL DOCUMANTATION -TEKNİK ÖZELLİKLER -TECHNICAL SPECIFICATIONS - DELGİ KAPASİTESİ / DRILLING
More informationTÜRKİYE DEMİRYOLU MAKİNALARI SANAYİİ A.Ş. TURKISH RAILWAY MACHINES INDUSTRY INC.
Kapalı vagon Covered wagon TÜRKİYE DEMİRYOLU MAKİNALARI SANAYİİ A.Ş. TURKISH RAILWAY MACHINES INDUSTRY INC. Teknik Özellikler Technical Features Kapasite 61 500 kg Capacity 61 500 kg Darası 28 500 kg Tare
More informationTLC. Helezon Tel Örme Makinesi Chain Line Fence Machine دوامة أسالك آلة الحياكة RENK ÇEŞİTLERİ
TLC Helezon Tel Örme Makinesi Chain Line Fence Machine دوامة أسالك آلة الحياكة RENK ÇEŞİTLERİ 2 المواصفاتالتقنية TEKNİK ÖZELLİKLER TECHNICAL SPECIFICATIONS TLC S serisi çift kalıplı sistem olup makinenin
More informationVOLVO GROUP. Motor ve Þanzýman Takozlarý Engine and Transmissions Mountings
GROUP Sayfa P a g e ANA PARÇA SINIFLARI 0 0 Motor ve Þanzýman Takozlarý Engine and Transmissions Mountings Þase, Aks, Makas ve Taþýyýcý Gruplarý Chassis, Axle, Spring and Steering Groups MAIN ARTICLE GROUPS
More informationASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE
Adress: FETIH AREA ADANA RINGROAD NO:113 ASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE DESCREPTION UNITE OF MEASURE L3+2 L4+2 L5+2 L6 Maksimum hidrolik uzanma ( yatay) Maximum hydraulic outreach (Ver.) 14,45
More informationPART MANUAL PARÇA KATALOĞU
BELT-LOOP MAKING MACHINE WITH IRONING SYSTEM (BLIND STITCH) GİZLİ DİKİŞ KÖPRÜ HAZIRLAMA MAKİNASI ÜTÜ SİSTEMLİ MODEL NEW-TECH 1200/1 PART MANUAL PARÇA KATALOĞU YAZICI DIKIS MAKINA SANAYI VE TICARET LTD.
More informationHidrolik Pompalar Hydraulic Pumps
25 GRUBU ÇİFT DÖNÜŞLÜ DİŞLİ POMP 25 GROUP BI-ROTTIONL GER PUMPS PTO mili saat yönünde (SĞ) The PTO shaft is CW rotating. PTO mili saatin tersi yönünde (SOL) The PTO shaft is CCW rotating. Giriş ve çıkış
More informationMakina ve Teknik Mlz. San. Ve Tic. Ltd. Sti.
SECTION AND PIPE BENDING MACHINES MODEL UPB 10 - - Two Rolls powered - Special cast frame - Shafts are hardened with special steel material - Roll are special steel material - hardened and ground - and
More informationBACK POCKET DESIGNING AUTOMAT FOR SPORT TROUSERS SPOR PANTOLON ARKA CEP İŞLEME OTOMATI PART MANUAL PARÇA KATALOĞU
BACK POCKET DESIGNING AUTOMAT FOR SPORT TROUSERS SPOR PANTOLON ARKA CEP İŞLEME OTOMATI MODEL NEW-TECH 2900/1 PART MANUAL PARÇA KATALOĞU YAZICI DIKIS MAKINA SANAYI VE TICARET LTD. STI. SIRA PARÇA NO ADET
More informationHow To Build A Canal Jetting Truck
GÜVEN ve ÝSTÝKRARIN BULUÞTUÐU ADRES. OTOMOTÝV MAKÝNA SANAYÝ VE TÝCARET LTD.ÞTÝ. AUTOMOTIVE MACHINE IND. AND TRADE LTD.CO. ÜRETÝMLERÝMÝZ OUR PRODUCTS MERDÝVENLÝ ÝTFAÝYE ARAÇLARI Fire Fighting Aerial Vehicles
More informationDüz Kanatlý Kare Tavan Anemostad
Düz Kanatlý Kare Tavan Anemostad Flat Blade Square Ceiling Diffuser DÜZ KANATLI KARE TAVAN ANEMOSTAD (BSCD) FLAT BLADE SQUARE CEILING DIFFUSER Model: Malzeme: Teknik Özellikler: Kaplama Tipleri: Montaj
More informationiplasma PLASMA-OXY CUTTING
iplasma PLASMA-OXY CUTTING 1950 1971 1974 1981 1994 2001 2003 2011 MVD produced its first machine. The first sheet metal working machine perforation press was presented to the market. The production of
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationPolishing and finishing barrels BTV
Polishing and finishing barrels BTV Polishing barrels for buttons, products in polyester, urea, galalith and related item. Strengthened model with rubber lining for finishing of metallic minuteness. Steel
More information200 m 17,0±0,5kg. Malzeme : Product Specs
İç Tel : Core Wire Malzeme : Product Specs Sac : Sheet Rulo Uzunluğu : Roll Lenght Ağırlık : Weight Ø2,5±0,001 mm ÇELİK TEL (çekme kuvveti ~ 160 kg/mm²/galvaniz oranı ~ 200g/m2) : Ø2,5±0,001 mm STEEL WIRE
More informationBSK BSK DÜZ KANATLI KARE TAVAN ANEMOSTAD (BSCD) FLAT BLADE SQUARE CEILING DIFFUSER
DÜZ KANATLI KARE TAVAN ANEMOSTAD (BD) LAT BLADE SQUARE CEILING DIUSER Düz Kanatlý Kare Tavan Anemostad Teknik Detaylarý lat Blade Square Ceiling Diffuser Technical Details : BD : Kare tavan anemostad,
More informationENGINEERING DESIGN MANUFACTURING ENGINEERING DESIGN MANUFACTURING HYDRAULIC SYSTEMS
ENGINEERING ENGINEERING HYDRAULIC SYSTEMS TS APPLICATIONS ABOUT HIDROSER HYDRAULIC SYSTEM ENGINEERING ABOUT HIDROSER Hidroser, as a certified Parker distributor supplies fluid power solutions for diverse
More informationPPM HYDRAULIC PRESSBRAKES
PPM HYDRAULIC PRESSBRAKES PPM Hydraulic pressbrakes Our long experience in producing hydraulic pressbrakes, as well conventional as CNC controlled, enables us to bring to our customers a solid engineered,
More informationServo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204
Servo/Hydraulic Press Brake HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 The HG Series Press Brake An ultra-high precision, high-speed compact bending solution featuring an advanced
More informationKH 120 Köfte ve Hamburger Şekillendirme Makinası Meatball & Hamburger Shaping Machine
KOD : KH 120 KAPASİTE : 20 Kg / H MOTOR GÜCÜ : 0.75 Kw. 1Hp. 380 Volt 50 Hz.(Çıkış Gücü : 220 v) EN/BOY/YÜKSEKLİK : 950 x 880 x 1335 mm AĞIRLIK : 135 kg Code : KH 120 Capacity : 20 Kg / H Motor Power :
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationBUZ MAKİNELERİ ICE MAKERS BUZ MAKİNELERİ
BUZ MAKİNELERİ BUZ MAKİNELERİ 293 294 BUZ MAKİNELERİ CB 184A 345x400x590 31 0,14 320 220 V, 50 Hz 1.345 21 kg / 24 hour Buffer Storage 4 kg EAN 8699234437830 21 kg / 24 saat Buz Haznesi kapasitesi 4 kg
More informationDÜZ KANATLI KARE TAVAN ANEMOSTAD (BSCD) FLAT BLADE SQUARE CEILING DIFFUSER
ÜZ KANATLI KARE TAVAN ANEMOSTA (BSC) FLAT BLAE SQUARE CEILING IFFUSER üz Kanatlý Kare Tavan Anemostad Sipariþ Kodu Flat Blade Square Ceiling iffuser Order Code Model: BSC : Kare tavan anemostad, sabit
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationSUPER SLIM LINEAR LED LIGHT
Indoor / Outdoor Lights Shopping Centers - Garages - Architectural Lights SUPER SLIM LINEAR LED LIGHT N H Original TRUE LIFE TIME - AVERAGE 100.000 Hours - HIGH PERFORMANCE LOW ENERGY Gercek Omur Degeri
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationNOAH KIRICI & ATAÇMAN
www.poyrazkirici.com POYRAZ KIRICI İŞ MAKİNALARI NOAH KIRICI & ATAÇMAN İMKANSIZI YAPIYORUZ, İŞİMİZ SADECE KIRICI NOAHTECH ENGINEERING CO., LTD NoahTech Engineering Co, Ltd, Kore'nin önde gelen İnşaat Ağır
More informationMERCEDES GROUP. 01 Motor ve Þanzýman Takozlarý Engine and Transmissions Mountings
GROUP Sayfa P a g e ANA PARÇA SINIFLARI 0 Motor ve Þanzýman Takozlarý Engine and Transmissions Mountings 0 Þase, Aks, Makas ve Taþýyýcý Gruplarý Chassis, Axle, Spring and Steering Groups 0 MAIN ARTICLE
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationARTI Bileme GRINDING& WELDING MACHINERY
5 AXES DOUBLE WHEEL COMPLETE TOP AND FACE GRINDER IN ONE CYCLE is a fast, PC controlled, built in one central construction top and face grinder in one clamping. guarantees a smooth top and face grinding
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationWIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928
WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.
More informationBMS 230 DG BMSY 230 DG - BMSY 230 DGH
BekaMak, a familyowned business is the only manufacturer of twı metal cutting processhack and Bandsawsas one of the leading manufacturer in Turkey has been wstablished in 1984 We manufacture high guality
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More information2 Axis Solar Tracker / 12 Kw
2 Axis Solar Tracker / 12 Kw 4 Rows 14 metres 4 rows x 14 metres Quantity / Panel Type: 68 units Photovoltaic panel 1.600 x 790 mm Panel power / Total power: 165 W 11,2 Kw Total Surface: 94 m² Diameter
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationGENERAL INFORMATION FOR REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING PLANT ( Direct & Chiller ).
GENERAL INFMATION F REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING PLANT ( Direct & Chiller ). Name of sector Refrigeration & Air Conditioning Name of Module REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING
More informationWANJET. Sprayers. Wanjet sprayers has been produced since 1978.
Sprayers Wanjet sprayers has been produced since 1978. Already from beginning was our assortment mainly based on high pressure sprayers with a pressure up to 150 bar. The idea about the high pressure is
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationTREND INDEX. DOUBLE MILKING MACHINES FOR COWS İkili Sağım Makinesi (Büyükbaş) 14-15
2014-2015 TREND INDEX DOUBLE MILKING MACHINES FOR COWS İkili Sağım Makinesi (Büyükbaş) DOUBLE MILKING MACHINES FOR COWS (GASOLINE ENGINE) Benzinli İkili Sağım Makinesi (Büyükbaş) DOUBLE MILKING MACHINES
More informationSheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More informationOffer No: 156/2010. Date: December 17, 2010. Dear gentlemen,
CONSTRUCTION MACHINES PRODUCTION PAGE 1 PROMETAL S.R. Milosava Vlajića 49 11450 Sopot Serbia EUROPE Tel. +381.63.133.44.56 +381.63.8623.758 Fax +381.11.283.41.39 web site: bank: Raiffeisen Bank Serbia
More informationYuvarlak Hava Kanal Menfezi
Yuvarlak Hava Kanal Menfezi Round ir Duct Grille YUVRLK HV KNL MENFEZÝ (RODG) ROUND IR DUCT GRILLE Model: * RODG-S : Daðýtýcý tip yuvarlak hava kanal menfezi. * RODG-R: Toplayýcý tip yuvarlak hava kanal
More informationPC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
More informationIVECO GROUP. Motor ve Þanzýman Takozlarý Engine and Transmissions Mountings
GROUP Sayfa P a g e ANA PARÇA SINIFLARI 0 0 Motor ve Þanzýman Takozlarý Engine and Transmissions Mountings Þase, Aks, Makas ve Taþýyýcý Gruplarý Chassis, Axle, Spring and Steering Groups 60 69 MAIN ARTICLE
More informationCat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM
Cat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM Product Status Report Parameter Product ID Equipment ID Comments Value JGB00714 NOT PROGRAMMED Machine Control 345D (JGB00714)
More informationnet flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
More informationJCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
More informationwww.vitalmutfak.com www.mutasgroup.com
www.vitalmutfak.com www.mutasgroup.com Merkez: Plevne Cad. No: 40 Gülveren/Mamak/ANKARA Tel: 0 312 363 99 33 (pbx) Fax: 0312 363 94 92 Fabrika: Taşpınar Köyü Mevkii No: 1 Çubuk/ANKARA Tel: 0 312 837 76
More information1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
More informationTaps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
More informationDuct piercer. Duct round punches. Duct piercer
Index Index Duct drill 2 Duct drill head 3 Din cutter 4 Pedal and pneumhydraulic pump 6 Electrical power pack 7 Hydraulic punch 8 Drilling cylinders 9 Punching system 10 Punches for connectors 14 Bar bending
More informationVideo conference solutions
149 Video conference solutions Video conference solutions Communication was never easier than with the Audipack videoconferencing solutions. Furniture, camera drawers, camera lift systems for every situation
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationCat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM
Cat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM Product Status Report Parameter Product ID Equipment ID Comments Value DHK00407 Machine Control 320D/323D (DHK00407) Parameter
More informationCopa Raked Bar Screen
Copa Raked Bar Screen Mechanically Raked Combined Sewer Overflow (CSO) Screen Key features & benefits Stainless steel with Tivar screen comb 10mm bar spacing Complete range up to 3000 l/sec per screen
More informationCat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM
Page 1 of 19 Cat Electronic Technician 2015A v1.0 Product Status Report 2:49 PM Product Status Report Parameter Value Product ID WRK00337 Equipment ID WRK00337 Comments A01-52 C9 330D (THX37891) Parameter
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationM26 T/30 T M40 T/50 T
M26 T/30 T M40 T/50 T Rough terrain specialist Capacity from 2600 kg to kg Lifting height from 3 m to 6 m 2- or 4-wheel drive models Motorization Turbo Euro III M: true rough terrain trucks The M trucks,
More informationA U T O M O T I V E L I F T S
Q U A L I T Y Y O U E X P E C T AT A P R I C E Y O U W O U L D N T T H E S TA N D A R D I N I N F O R M AT I O N, E Q U I P M E N T A N D D I A G N O S T I C S S Y S T E M S h t t p : / / d i a g n o s
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More information19-33 22-35 22-35 22-35 6-21-34-124 20-21-34-124 10-26-39 21-35-125 21-35-125 21-35-125 8-25-38 9-25-38 8-24-38 9-25-38 9-25-39 9-25-38 7-22-36-125
INDEX A TRUCK EXPERT CODE /Açıklama Page/Sayfa TRUCK EXPERT CODE /Açıklama Page/Sayfa 340 00 520 340 00 521 346 00 045 346 00 046 346 00 047 346 00 048 346 00 049 346 00 050 346 00 051 346 00 053 346 00
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationToll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com
Toll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com Supercharge your Fence & Gate Manufacturing Only $3,650! Vogel s 25 Ton Power Tower Model Tonnage Power Requirements Power Connection
More information2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
More informationVolkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19)
19 Engine - Cooling System (Page GR-19) Cooling system draining and filling general information Body components, layout Engine components, layout Radiator fan run-on checking Recommended mixture ratios
More informationButt Fusion Welding of HDPE Pipes Work Procedure
Butt Fusion Welding of HDPE Pipes Work Procedure A pipeline is as good as its weakest point. Accordingly it is not only important that quality pipes and components are used in a piping system, but also
More informationAir pressure rise sensor
21 Air pressure rise sensor Voltage rating: Power rating: Max. safe pressure trucks, buses. 12 V 24 V 48 W 2943 kpa Part number Required pressure Kind of thread Terminal variety 501.13.20 14,7 4,9 9,8
More information2. AIRCONDITIONING AND REFRIGERATION
2. AIRCONDITIONING AND REFRIGERATION 1. INTRODUCTION Air Conditioning and Refrigeration is an important area where in lot of self-employment opportunities are available. Now a day there is hardly a house
More informationHow To Write A Part Program For A Laser Cutting Machine
Journal of Naval Science and Engineering 2009, Vol. 5, No.2, pp. 75-88 COMPUTER AIDED PART PROGRAM GENERATION FOR A LASER CUTTING MACHINE Suleyman BASTURK, Major Aeronautics and Space Technologies Institute,
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationAMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12
AMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12 As At 08/01/03 1. OVERVIEW Amada Modular Flexible Manufacturing Cell The proposal enclosed is for a fully Automated, flexible
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More informationFailure to comply with the following cautions and warnings could cause equipment damage and personal injury.
1.0 IMPORTANT RECEIVING INSTRUCTIONS Visually inspect all components for shipping damage. Shipping Damage is not covered by warranty. If shipping damage is found, notify carrier at once. The carrier is
More informationTAMAMLAYICI ÜRÜNLER Complementary Products
Ç NDEK LER Index SAN100 Simflex SAN100 Duvar Önü Wall&Floor SAN100 Alç pan Plasterboard SAN100 Hela Ta Squating Pan SAN100 Duvar Önü ki Parça Wall&Floor Two Pieces SAN100 Alç pan ki Parça Plasterboard
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
More informationStock List: >>Offset- Printing Machines
>>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationRMF TANDEM 900 OFF-LINE FILTER SYSTEMS
RMF TANDEM 900 OFF-LINE FILTER SYSTEMS RMF Tandem 900 Off-line filter Systems can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated
More information