TECH DATA ELECTRONIC GROUPSETS 122 GROUPSETS 128 WHEELS 138

Transcription

1 TECH DATA Over the course of the previous pages in this catalog you can find a great deal of general information regarding every Campagnolo product. However, if you need more specific information and technical data we have compiled an even greater resource in the following section. Should you need yet more information please visit: ELECTRONIC GROUPSETS 122 GROUPSETS 128 WHEELS 138 Please note that we reserve the right to change products, surface finish and specifications at any moment without prior notice.

2 ELECTRONIC GROUPSETS TECHNICAL SPECIFICATIONS COMPONENT OPTIONS FEATURES WEIGHT (G.)* COMPONENT OPTIONS FEATURES WEIGHT (G.)* SUPER EPS 11S DTI EPS V2 INTERFACE DTI EPS V2 POWER UNIT SUPER EPS STD SUPER EPS 11S REAR DERAILLEUR for caliper brakes - composite body - lightened carbon brake lever - Ultra-Shift geometry - ergonomic brake lever with high fulcrum - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - front derailleur micro-adjustment possibility - multiple shifting - buttons Switch Mode Technopolymer, waterproof (IP67) Fireproof technopolymer, waterproof (IP67) - 3 cell Lithium- Ion 12V rechargeable battery - DTI Digital Tech Intelligence Eeprom board - data input/output port and battery charger - system shut-down magnet - magnetic power block strap - compatible with SR/RE EPS for double crankset - capacity 16 max. chainring min. chainring 34 - composite and aluminum 11s fork - titanium bolts - antifriction treatment - body in technopolymer and carbon fibre - high torque ratio motors - Position sensor - Waterproof (IP67) upper to lower pulley-axle: - composite outer plate - Titanium hanger and pivot bolt - parallelogram with 11s geometry - carbon fiber upper and lower body - metal-carbon cage - lightened special rubber pulleys - bottom pulley with ceramic bearings - on the upper and lower body - high torque ratio motors - Position sensor - Waterproof (IP67)" COMP ULTRA CT CARBON 11S SUPER SKELETON BRAKES FRONT HUB 34-0, 36-2 cranks (Ultra-Hollow Structure) - light alloy fixing bolts and nuts - llight alloy chainrings light alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment - differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated axle - requires BB cups stainless steel technopolymer - USB bearings (Ultra Smooth Bearings) brake-pad height adjustment ratio: 40 0 (measured from brake fixing-bolt to brake-shoe-nut) - ball bearings - light alloy and titanium hardware - brake pads orbital adjustment - lightened rear brake - skeletonized arms - brake pad with elastomer compound with reinforcement in aramid fiber and silica - optional: front and rear dual-pivot brake (297 g) 32 holes - light alloy oversize axle and body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release TECH DATA > ELECTRONIC GROUPSETS SUPER 11S 11-23, 11-2, 11-27, 12-2, 12-27, steel and 6 titanium - nickel-chromed finish for steel sprockets - light alloy carrier - light alloy supports for the final two triplets - 11s timing - 11s tooth machining - 11s light alloy lockring, thread 27x1 177 REAR HUB 32 holes - 9s/10s/11s - light alloy body, axle and one-piece freewheel body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release BC 1 x24tpi - height light alloy with steel inserts - cup and cone systeme S SUPER TITANIUM 11S 170, 172., 17, width, - Ni-PTFE Finish links - requires Ultra-Link for 11s chain - lightened links - hollow pins - 11s outer link cranks (Ultra-Hollow Structure) - light alloy fixing bolts - light alloy chainrings light alloy chainrings specially designed to - differentiated number of pins according to chainring combination - CULT bearings (Ceramic Ultimate Level Technology) - integrated semi-axles in titanium - requires Super Record BB cups 2,10/ 603 THREADLESS HIDDENSET WATER-BOTTLE CARRIER RECORD 1 - for unthreaded fork tube - height composite cover and light alloy fixing screw - lubrication port - cup and cone system - patented centering system 1-1/8 internal headset for unthreaded fork tube - height.9 - patent pending system - composite and light alloy fixing screw and cap - cup and cone system monocoque carbon, supplied with water-bottle shells - technopolymer with PTFE SUPER 4 BB86 86,x41 BB RIGHT 79x46 29 COMP ULTRA CARBON 11S, 39-2, 39-3 cranks (Ultra-Hollow Structure) - light alloy fixing bolts - light alloy chainrings light alloy chainrings specially designed to - differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated axle - requires BB cups ** Example: 2,10 x 108 links = 227 g. 123

3 ELECTRONIC GROUPSETS TECHNICAL SPECIFICATIONS COMPONENT OPTIONS FEATURES WEIGHT (G.)* COMPONENT OPTIONS FEATURES WEIGHT (G.)* 11S DTI EPS V2 INTERFACE DTI EPS V2 POWER UNIT EPS 11S EPS 11S REAR DERAILLEUR 11S 11S CARBON 11S 11-23, 11-2, 11-27, 12-2, 12-27, , 172., 17, for caliper brakes - composite body and levers - Ultra-Shift geometry - ergonomic brake lever with high fulcrum - closer brake lever - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - front derailleur micro-adjustment possibility - multiple shifting - buttons Switch Mode Technopolymer, waterproof (IP67) Fireproof technopolymer, waterproof (IP67) - 3 cell Lithium-Ion 12 V rechargeable battery - DTI Digital Tech Intelligence Eeprom board - data input/output port and battery charger - system shutdown magnet - magnetic power block strap - compatible with SR/RE EPS for double crankset - capacity 16 max. chainring min. chainring 34 - aluminum fork - antifriction treatment - body in technopolymer and carbon fibre - high torque ratio motors - Position sensor - Waterproof (IP67)" upper to lower pulley-axle: - composite outer plate - parallelogram with 11s geometry - black anodized forged upper and lower body - metal-carbon cage - lightened special rubber pulleys - pulley movement with ceramic ball bushings- high torque ratio motors - Position sensor - Waterproof (IP67)" 8 steel and 3 titanium - nickel-chromed finish for steel sprockets - light alloy supports for the final two triplets - 11s timing - 11s tooth machining - 11s light alloy lockring, thread 27x1 width, - Ni-PTFE Finish links - requires Ultra-Link for 11s chain - lightened links - hollow pins - 11s outer link cranks (Ultra-Hollow Structure) - light alloy fixing bolts - llight alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment -differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated semi-axles - requires BB cups ,10/ 61 SKELETON BRAKES FRONT HUB REAR HUB THREADLESS HIDDENSET WATER-BOTTLE CARRIER RECORD technopolymer - USB bearings (Ultra Smooth Bearings) brake-pad height adjustment ratio: 40 0 (measured from brake fixing-bolt to brake-shoe-nut) - ball bearings - light alloy hardware - brake pads orbital adjustment - lightened rear brake - skeletonized arms - brake pad with elastomer compound with reinforcement in aramid fiber and silica - optional: front and rear dual-pivot brake (303 g) 32 holes - light alloy oversize axle and body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release 32 holes - 9s/10s/11s - light alloy body, axle and one-piece freewheel body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release BC 1 x24tpi - height light alloy with steel inserts - cup and cone system 1 - for unthreaded fork tube - height composite cover and light alloy fixing screw - lubrication port - cup and cone system - patented centering system 1-1/8 internal headset for unthreaded fork tube - height.9 - patent pending system - composite and light alloy fixing screw and cap - cup and cone system monocoque carbon, supplied with water-bottle shells - technopolymer with PTFE TECH DATA > ELECTRONIC GROUPSETS 46 BB86 86,x41 BB RIGHT 79x46 29 COMP ULTRA CARBON 11S, 39-2, 39-3 cranks (Ultra-Hollow Structure) - light alloy fixing bolts - light alloy chainrings light alloy chainrings specially designed to - differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated axle - requires BB cups 63 COMP ULTRA CT CARBON 11S 34-0, 36-2 cranks (Ultra-Hollow Structure) - light alloy fixing bolts and nuts - llight alloy chainrings light alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment - differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated axle - requires BB cups 63 stainless steel ** Example: 2,39 x 108 links = 28 g. 12

4 ELECTRONIC GROUPSETS TECHNICAL SPECIFICATIONS COMPONENT OPTIONS FEATURES WEIGHT (G.)* COMPONENT OPTIONS FEATURES WEIGHT (G.)* CHORUS EPS 11S DTI CHORUS EPS V2 INTERFACE DTI CHORUS EPS V2 POWER UNIT CHORUS EPS 11S CHORUS EPS 11S REAR DERAILLEUR for caliper brakes - composite body - brake lever in - ergonomic brake lever with high fulcrum - closer brake lever - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - front derailleur micro-adjustment possibility - multiple shifting - buttons Switch Mode Tecnopolimero, waterproof (IP67) - compatible with CHORUS EPS Fireproof technopolymer, waterproof (IP67) - 3 cell Lithium-Ion 12 V rechargeable battery - DTI Digital Tech Intelligence Eeprom board - data input/output port and battery charger - system shutdown magnet - magnetic power block strap - compatible with CHORUS EPS for all chainring combinations - capacity 16 max. chainring - min. chainring 34 - chrome-plated nickel fork - antifriction insert + body in technopolymer and carbon fibre - high torque ratio motors - Position sensor - Waterproof (IP67) upper to lower pulley-axle: - total capacity: 33 teeth - outer plate - parallelogram with 11s geometry - die-cast upper body - lightened special rubber pulleys - on the upper and lower body - high torque ratio motors - Position sensor - Waterproof (IP67)" CHORUS SKELETON BRAKES CAMPAGNOLO SKELETON BRAKES RECORD technopolymer brake-pad height adjustment ratio:40 0 (measured from brake fixing-bolt to brake-shoe-nut) - brake pads orbital adjustment - skeletonized arms - special pad compound - front and rear dual-pivot brake - Campagnolo standard brake shoe brake-pad height adjustment ratio:40 0 (measured from brake fixing-bolt to brake-shoe-nut) - skeletonized arms - front and rear dual-pivot brake - universal standard brake shoe shells - technopolymer with PTFE TECH DATA > ELECTRONIC GROUPSETS 11-23, 11-2, 11-27, 12-2, 12-27, steel - nickel-chromed finish - light alloy supports for the final two triplets - 11s timing - 11s tooth machining - 11s light alloy lockring, thread 27x1 230 width, - Ni-PTFE Finish links - requires Ultra-Link for 11s chain - 11s outer link - new material for outer link 2,24/ CHORUS CARBON 11S 170, 172., full-carbon unidirectional-multidirectional cranks - light alloy fixing bolts - llight alloy chainrings specially designed to -differentiated number of pins according to chainring combination - integrated semi-axles - requires BB cups BB86 86,x41 BB RIGHT 79x46 29 COMP ULTRA CARBON 11S, 39-2, 39-3 cranks (Ultra-Hollow Structure) - light alloy fixing bolts - light alloy chainrings light alloy chainrings specially designed to - differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated axle - requires BB cups 63 COMP ULTRA CT CARBON 11S 34-0, 36-2 cranks (Ultra-Hollow Structure) - light alloy fixing bolts and nuts - llight alloy chainrings light alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment - differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated axle - requires BB cups 63 stainless steel ** Example: 2,24 x 108 links = 242 g. 127

5 GROUPSETS TECHNICAL SPECIFICATIONS COMPONENT OPTIONS FEATURES WEIGHT (G.)* COMPONENT OPTIONS FEATURES WEIGHT (G.)* SUPER 11S REAR DERAILLEUR SUPER 11S SUPER 11S with S2 System CSD Chain Security Device DERAILLEUR CABLE ADJUSTING BARREL DERAILLEUR CABLE DEVIATOR INSERT carbon fiber outer link with three holes to reduce weight outer derailleur cage in carbon fiber titanium screws - parallelogram with Embrace geometry - upper and lower body in monolithic technopolymer - inner derailleur cage in metal derailleur pulleys in special lightened technopolymer lower derailleur pulley with ceramic ball bearings for double crankset - capacity 16 max. chainring 6 min. chainring 34 - inner semi-cage in aluminum - outer semi-cage in monocoque carbon fiber - titanium bolts for double crankset - capacity 16 max. chainring 6 min. chainring 34 - inner semi-cage in aluminum - outer semi-cage in monocoque carbon fiber - titanium bolts - S2 System for stabilizing drivechain aluminum structure with high levels of stiffness, positioning and adjustment independent of the derailleur, compatible with all Campagnolo braze-on derailleurs micrometric adjustment of derailleur cable tension in stainless steel , REAR HUB THREADLESS HIDDENSET WATER-BOTTLE CARRIER 32 holes - 9s/10s/11s - light alloy body, axle and one-piece freewheel body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release BC 1 x24tpi - height light alloy with steel inserts - cup and cone systeme for unthreaded fork tube - height composite cover and light alloy fixing screw - lubrication port - cup and cone system - patented centering system 1-1/8 internal headset for unthreaded fork tube - height.9 - patent pending system - composite and light alloy fixing screw and cap - cup and cone system monocoque carbon, supplied with water-bottle shells - technopolymer with PTFE TECH DATA > GROUPSETS SUPER ULTRA-SHIFT 11S for caliper brakes - composite body ball bearings - lightened carbon brake lever - Ultra-Shift internal mechanism - ergonomic brake lever with pivot in line with support surface of Ergopower - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - No-Bulge housing path - minimum friction housings - front derailleur micro-adjustment possibility - multiple shifting 342 SUPER 11S 11-23, 11-2, 11-27, 11-29, 12-2, 12-27, steel and 6 titanium - nickel-chromed finish for steel sprockets - light alloy carrier - light alloy supports for the final two triplets - 11s timing - 11s tooth machining - 11s light alloy lockring, thread 27x S width, - Ni-PTFE Finish links - requires Ultra-Link for 11s chain - lightened links - hollow pins - 11s outer link 2,10/ SUPER TITANIUM 11S 170, 172., 17, cranks (Ultra-Hollow Structure) - light alloy fixing bolts - light alloy chainrings light alloy chainrings specially designed to - differentiated number of pins according to chainring combination - CULT bearings (Ceramic Ultimate Level Technology) - integrated semi-axles in titanium - requires Super Record BB cups 603 SUPER 4 BB86 86,x41 BB RIGHT 79x46 29 SUPER SKELETON BRAKES brake-pad height adjustment ratio: 40 0 (measured from brake fixing-bolt to brake-shoe-nut) - ball bearings - light alloy and titanium hardware - brake pads orbital adjustment - lightened rear brake - skeletonized arms - brake pad with elastomer compound with reinforcement in aramid fiber and silica - optional: front and rear dual-pivot brake (297 g) 272 FRONT HUB 32 holes - light alloy oversize axle and body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release ** Example: 2,10 x 108 links = 227 g. 129

6 GROUPSETS TECHNICAL SPECIFICATIONS COMPONENT OPTIONS FEATURES WEIGHT (G.)* COMPONENT OPTIONS FEATURES WEIGHT (G.)* 11S REAR DERAILLEUR 11S 11S with S2 System CSD Chain Security Device DERAILLEUR CABLE ADJUSTING BARREL DERAILLEUR CABLE DEVIATOR INSERT carbon fiber outer link with two holes to reduce weight outer derailleur cage in carbon fiber parallelogram with Embrace geometry - upper and lower body in monolithic technopolymer - inner derailleur cage in metal derailleur pulleys in special lightened technopolymer derailleur pulleys with bushings in sintered material for double standard and CT crankset - capacity 16 max. chainring min. chainring 34 - composite and aluminum fork - antifriction treatment for double standard and CT crankset - capacity 16 max. chainring min. chainring 34 - composite and aluminum fork - antifriction treatment - S2 System for stabilizing drivechain aluminum structure with high levels of stiffness, positioning and adjustment independent of the derailleur, compatible with all Campagnolo braze-on derailleurs micrometric adjustment of derailleur cable tension in stainless steel , THREADLESS HIDDENSET WATER-BOTTLE CARRIER RECORD BC 1 x24tpi - height light alloy with steel inserts - cup and cone system 1 - for unthreaded fork tube - height composite cover and light alloy fixing screw - lubrication port - cup and cone system - patented centering system 1-1/8 internal headset for unthreaded fork tube - height.9 - patent pending system - composite and light alloy fixing screw and cap - cup and cone system monocoque carbon, supplied with water-bottle shells - technopolymer with PTFE TECH DATA > GROUPSETS ULTRA-SHIFT 11S for caliper brakes - composite body and levers ball bearings - Ultra-Shift internal mechanism - ergonomic brake lever with pivot in line with support surface of Ergopower - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - No-Bulge housing path - minimum friction housings - front derailleur micro-adjustment possibility - multiple shifting S 11-23, 11-2, 11-27, 11-29, 12-2, 12-27, steel and 3 titanium - nickel-chromed finish for steel sprockets - light alloy supports for the final two triplets - 11s timing - 11s tooth machining - 11s light alloy lockring, thread 27x S width, - Ni-PTFE Finish links - requires Ultra-Link for 11s chain - lightened links - hollow pins - 11s outer link 2,10/ CARBON 11S 170, 172., 17, cranks (Ultra-Hollow Structure) - light alloy fixing bolts - llight alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment -differentiated number of pins according to chainring combination - USB bearings (Ultra Smooth Bearings) - integrated semi-axles - requires BB cups BB86 86,x41 BB RIGHT 79x46 29 SKELETON BRAKES brake-pad height adjustment ratio: 40 0 (measured from brake fixing-bolt to brake-shoe-nut) - ball bearings - light alloy hardware - brake pads orbital adjustment - lightened rear brake - skeletonized arms - brake pad with elastomer compound with reinforcement in aramid fiber and silica - optional: front and rear dual-pivot brake (303 g) 284 FRONT HUB 32 holes - light alloy oversize axle and body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release 116 REAR HUB 32 holes - 9s/10s/11s - light alloy body, axle and one-piece freewheel body adjustable bearings quick-release with lock nuts - O.L.D Syetric Action lever on the release ** Example: 2,10 x 108 links = 227 g. 131

7 GROUPSETS TECHNICAL SPECIFICATIONS COMPONENT OPTIONS FEATURES WEIGHT (G.)* COMPONENT OPTIONS FEATURES WEIGHT (G.)* REAR DERAILLEUR carbon fiber outer link - parallelogram with Embrace Technology upper body in monolithic technopolymer with long carbon fiber - lightened derailleur pulleys in special rubber 183 RECORD shells - technopolymer with PTFE for double crankset - capacity 16 max. chainring 6 - min. chainring 34 - cast aluminum internal semi-cage cast aluminum external semi-cage with plate 76 with S2 System CSD Chain Security Device DERAILLEUR CABLE ADJUSTING BARREL for double crankset - capacity 16 max. chainring 6 - min. chainring 34 - cast aluminum internal semi-cage cast aluminum external semi-cage with plate - S2 System for stabilizing drivechain aluminum structure with high levels of stiffness, positioning and adjustment independent of the derailleur, compatible with all Campagnolo braze-on derailleurs micrometric adjustment of derailleur cable tension 79 1 TECH DATA > GROUPSETS DERAILLEUR CABLE DEVIATOR INSERT in stainless steel 1, CHORUS ULTRA-SHIFT 11S for caliper brakes - composite body - brake lever in carbon fiber - ball bearings - Ultra-Shift internal mechanism - ergonomic brake lever with pivot in line with support surface of Ergopower - closer brake lever - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - No-Bulge housing path - minimum friction housings - front derailleur micro-adjustment possibility - multiple shifting , 11-2, 11-27, 11-29, 12-2, 12-27, steel - nickel-chromed finish - light alloy supports for the final two triplets - 11s timing - 11s tooth machining - 11s light alloy lockring, thread 27x1 230 width, - Ni-PTFE Finish links - requires Ultra-Link for 11s chain - 11s outer link 2,24/ CHORUS CARBON 11S 170, 172., full-carbon unidirectional-multidirectional cranks - light alloy fixing bolts - light alloy chainrings specially designed to -differentiated number of pins according to chainring combination - integrated semi-axles - requires BB cups BB86 86,x41 BB RIGHT 79x46 29 CHORUS SKELETON BRAKES brake-pad height adjustment ratio:40 0 (measured from brake fixing-bolt to brake-shoe-nut) - brake pads orbital adjustment - skeletonized arms - special pad compound - front and rear dual-pivot brake - Campagnolo standard brake shoe 302 CAMPAGNOLO SKELETON BRAKES brake-pad height adjustment ratio:40 0 (measured from brake fixing-bolt to brake-shoe-nut) - skeletonized arms - front and rear dual-pivot brake - universal standard brake shoe 321 WATER-BOTTLE CARRIER monocoque carbon, supplied with water-bottle ** Example: 2,24 x 108 links = 242 g. 133

8 GROUPSETS TECHNICAL SPECIFICATIONS COMPONENT OPTIONS FEATURES WEIGHT (G.)* 72 COMPONENT OPTIONS FEATURES WEIGHT (G.)* ATHENA 11S REAR DERAILLEUR ATHENA STD + CT 11S ATHENA POWER-SHIFT 11S ATHENA POWER-SHIFT 11S ALU-CARBON braze-on / clip-on: Ø 32, 3 upper to lower pulley-axle: - outer plate - parallelogram with 11s geometry - die-cast upper body - lightened special rubber pulleys for double standard and CT crankset - capacity 16 max. chainring - min. chainring 34 - chrome-plated nickel fork - antifriction insert 92 for caliper brakes - composite body - brake lever in - Power-Shift mechanism - ergonomic brake lever with high pivot - ergonomic lever 3 - closer brake lever - brake opening control integrated with the brake lever - insert for large hands - Vari- Cushion silicone hoods - No-Bulge housing path - minimum friction housings - front derailleur micro-adjustment possibility - multiple shifting for caliper brakes - composite body - carbon brake lever with core - Power-Shift mechanism - ergonomic brake lever with high pivot - ergonomic lever 3 - closer brake lever - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - No-Bulge housing path - minimum friction housings - front derailleur microadjustment possibility - multiple shifting COMP ONE CARBON 11S COMP ONE CT CARBON 11S CAMPAGNOLO SKELETON BRAKES WATER-BOTTLE CARRIER RECORD BB30A 73x42 BB86 86,x41, 39-2, , 36-2 full-carbon unidirectional-multidirectional cranks - light alloy fixing bolts - light alloy chainrings light alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment - differentiated number of pins according to chainring combination - integrated axle - requires BB cups full-carbon unidirectional-multidirectional cranks - light alloy fixing bolts and nuts - light alloy chainrings light alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment - differentiated number of pins according to chainring combination - integrated axle - requires BB cups stainless steel technopolymer brake-pad height adjustment ratio:40 0 (measured from brake fixing-bolt to brake-shoe-nut) - skeletonized arms - front and rear dual-pivot brake - universal standard brake shoe monocoque carbon, supplied with water-bottle shells - technopolymer with PTFE TECH DATA > GROUPSETS 11-23, 11-2, 11-27, 12-2, 12-27, steel - nickel-chromed finish - light alloy supports for the final two triplets - 11s timing - 11s tooth machining - 11s light alloy lockring, thread 27x1 230 width, - Ni-PTFE Finish links - requires Ultra-Link for 11s chain - 11s outer link - new material for outer link 2,24/ ATHENA 11S ATHENA 11S ATHENA CARBON 11S 39-2, , , 170, 172., , 39-3 forged aluminum cranks - light alloy fixing bolts and nuts - light alloy chainrings - chainrings with XPSS (extreme Performance Shifting System) - chainrings with silver anodization - 8 pins on the large chainring - integrated axle - requires BB cups forged aluminum cranks - light alloy fixing bolts and nuts - llight alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment -differentiated number of pins according to chainring combination - integrated axle - requires BB cups full-carbon unidirectional-multidirectional cranks - light alloy fixing bolts and nuts - light alloy chainrings specially designed to facilitate shifting chainrings with hard anodization treatment -differentiated number of pins according to chainring combination - integrated axle - requires BB cups x3 COMPONENT OPTIONS FEATURES WEIGHT (G.)* ATHENA 11X3 ATHENA 11X3 Deep black Bright Silver Alu/Carbon Braze-on/clip-on (Ø 32 and ) Dedicated left control for triple drivetrain for caliper brakes - composite body - Power-Shift mechanism - ergonomic brake lever with high pivot - ergonomic lever 3 - closer brake lever - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - No-Bulge housing path - minimum friction housings - front derailleur microadjustment possibility - multiple shifting For triple 11x3 crankset - capacity 16 - chainring max 2 - chainring min anti-friction insert - Nickel-chromium fork - surface treatment ATHENA CT CARBON 11S 16, 170, 172., , 2-36 full-carbon unidirectional-multidirectional cranks - light alloy fixing bolts and nuts - light alloy chainrings - chainrings with XPSS (extreme Performance Shifting System) - chainrings with hard anodization treatment - 8 pins on the large chainring - integrated axle - requires POWER- TORQUE BB cups 640 ATHENA 11S REAR DERAILLEUR ATHENA TRIPLE 11S Long cage Black Silver 170, 172., Black Silver Carbon upper to lower pulley-axle: 82 - outer plate - parallelogram with 11s geometry - die-cast upper body - lightened special rubber pulleys Hollow hand crank - forged aluminum cranks - light alloy fixing bolts and nuts - light alloy chainrings - chainrings with XPSS (extreme Performance Shifting System) - chainrings with silver anodization - 8 pins on the large chainring - integrated axle - requires BB cups ** Example: 2,24 x 108 links = 242 g. 13

9 GROUPSETS TECHNICAL SPECIFICATIONS TRIATHLON - TIME TRIAL COMPONENT OPTIONS FEATURES WEIGHT (G.)* 10S REAR DERAILLEUR QS STD + CT 9S/10S POWER-SHIFT 10S SHIFTERS 10S FB SHIFTERS UD 10S ULTRA-NARROW 10S 10S CT 10S BRAKES short cage medium cage braze-on / clip-on: Ø 32, 3 black&red 11-2, 12-23, 12-2, 13-26, BB30A 73x42 BB86 86,x41 upper to lower pulley-axle: - bodies - rollers on bushings - rollers in special rubber - parallelogram with 11s geometry upper to lower pulley-axle: 72, - bodies - rollers on bushings - rollers in special rubber - parallelogram with 11s geometry for double standard and CT crankset - capacity 16 max. chainring - min. chainring 34 - antifriction insert - chromeplated nickel fork - surface treatments for caliper brakes - composite body - brake lever - Power Shift mechanism - ergonomic brake lever with high pivot - ergonomic lever 3 - closer brake lever - brake opening control integrated with the brake lever - insert for large hands - Vari-Cushion silicone hoods - No-Bulge housing path - minimum friction housings - front derailleur micro-adjustment possibility - multiple shifting for caliper brakes - double/triple crankset compatible - alucomposite body brake lever - requires QS front derailleur - upshift up to three sprockets - downshift up to three sprockets - rolling mechanism - adjustable brake lever distance - optical gear display - indexed left-hand control steel - Ultra Drive - single sprockets - galvanized - supplied with lockring width,9 - Ni-PTFE Finish links - Ultra Drive - requires HD-Link for Ultra Narrow chai forged cranks - chainrings MPS (Micro Precision Shifting) - light-alloy sheared-drawn chainrings with antifriction treatment - 8 pins on the large chainring - integrated POWER- TORQUE axle - requires BB cups forged cranks - chainrings MPS (Micro Precision Shifting) - light-alloy sheared-drawn chainrings with antifriction treatment - 8 pins on the large chainring - integrated POWER- TORQUE axle - requires BB cups , brake-pad height adjustment ratio: 40 0 (measured from brake fixing-bolt to brake-shoe-nut) - brake pads orbital adjustment - front and rear dual-pivot brake - universal standard brake shoe COMPONENT OPTIONS FEATURES WEIGHT (G.)* BAR-END 11S EPS SHIFTING LEVERS BAR-END 11S CHORUS EPS SHIFTING LEVERS BAR-END 11S EPS BRAKE LEVERS BAR-END 11S CHORUS EPS BRAKE LEVERS TT DTI EPS V2 INTERFACE TT DTI CHORUS EPS V2 INTERFACE BAR-END 11S SHIFTING LEVERS CARBON BAR-END 11S SHIFTING LEVERS BAR-END 10S SHIFTING LEVERS BAR-END BRAKE LEVERS CARBON BAR-END BRAKE LEVERS PISTA Lever in lightened - body in technopolymer - 11 speed compatible - Diameter waterproof IP67 - Overall length 2. Lever in lightened - body in technopolymer - 11 speed compatible - Diameter waterproof IP67 - Overall length 60,4. Brake lever in carbon - body and buttons in technopolymer - compatible 11 speed - Diameter waterproof IP67 Brake lever in aluminum - body and buttons in technopolymer - compatible 11 speed - Diameter waterproof IP67 Technopolymer, waterproof (IP67) - dual output for bar-end controls and brake controls Technopolymer, waterproof (IP67) - dual output for bar-end controls and brake controls technopolymer body - carbon fibre levers - Back to Zero position - adjustable initial position - Multi-shifting System - micrometric adjustment of the front derailleur - with Campagnolo 11s drivetrain compatible technopolymer body - levers - Back to Zero position - adjustable initial position - Multi-shifting System - micrometric adjustment of the front derailleur - with Campagnolo 11s drivetrain compatible technopolymer body - levers - Back to Zero position - Adjustable initial position - Multi-shifting System - micrometric adjustment of the front derailleur - with Campagnolo 10s drivetrain compatible technopolymer body - carbon fibre levers - aerodynamic profile - ergonomic profile for the levers - quick-release system 86 technopolymer body - leva in alluminio - aerodynamic profile - ergonomic profile for the levers - Quick-release system COMPONENT OPTIONS FEATURES WEIGHT (G.)* PISTA FRONT HUB PISTA REAR HUB PISTA PISTA BOTTOM BRACKET PRO FIT PLUS PEDALS THREADLESS HIDDENSET 32, 36 holes light alloy body lubrication port - small flanges - O.L.D , 36 holes light alloy body lubrication port - small flanges - O.L.D , , 48, 49, 0, 1, 2 ITA, ENG requires b.b. L. 111 (asyetrical) axle L. 111 (asyetrical) - composite and light alloy cartridge - light alloy cups - without sealings Titanium axle - light alloy body - with floating (standard) or fixed (optional) cleats - composite axle fixing nuts - polished finish - left axle compatible with the ErgoBrain magnet BC 1 x24tpi - height light alloy with steel inserts - cup and cone system 1 - for unthreaded fork tube - height composite cover and light alloy fixing screw - lubrication port - cup and cone system - patented centering system 1-1/8 internal headset for unthreaded fork tube - height.9 - patent pending system - composite and light alloy fixing screw and cap - cup and cone system TECH DATA > GROUPSETS 136 ** Example: 2,39 x 108 links = 28 g. 137

10 CAMPAGNOLO SERVICE CENTER The Service Center is the reference point for all Campagnolo dealers and its aim is to provide an adequate after-sales service to Campagnolo users. Service Centers are a territorial extension of Campagnolo srl and work exclusively with dealers, no exceptions made. The Service Centers handle two activities: After-sales Service and Spare Parts Service. The After-sales Service provides technical assistance for products under guarantee or otherwise, enabling cyclists to enjoy the first-class characteristics of Campagnolo products for long, without forfeiting safety, performance and endurance. The Spare Parts Service handles the distribution of spare parts. Campagnolo possesses a large inventory of spare parts and is able to replenish its distribution system adequately in relatively short times. TECHNICAL INFORMATION ITALY (CENTRAL) Tel Fax: GERMANY Tel Fax: U.S.A. Tel Fax: We therefore advise you to refer to your Campagnolo dealer for any expert action required by your bikes - these dealers are the only ones supported by the constant, skilled collaboration of Campagnolo Service Centers. FRANCE Tel Fax: SPAIN Tel Fax: JAPAN Tel Fax: SERVICE CENTERS ITALY - CENTRAL SERVICE CENTER CAMPAGNOLO SRL HEADQUARTERS Via della Chimica, VICENZA Tel Fax: service.campagnolo@campagnolo. com AUSTRALIA DE GRANDI CYCLE AND SPORTS 419 Moorabool Street 3220 GEELONG (VICTORIA) Tel shane@degrandi.com.au BIKE SPORTZ IMPORTS 23C & 23D Industrial Drive BRAESIDE 319 (VICTORIA) Tel jnunan@bikesportz.com.au AUSTRIA - GERMANY CAMPAGNOLO DEUTSCHLAND GMBH Alte Garten LEVERKUSEN Tel Fax: BENELUX INTERNATIONAL CYCLE CONNECTION B.V. - I.C.C. Counicatielaan A 438 BV TERNEUZEN NETHERLAND Tel. +31 (0) Fax: +31 (0) info@i-c-c.nl Web: BRAZIL DIPSA-Distribuidora de Pecas e Acessorios Ltda. Rua Barao do Rego Barros 10 CEP São Paulo SP Brazil Tel. (11) dipsa@dipsa.com.br CANADA CYCLES MARINONI INC 1067, Levis - LACHENAIE QUEBEC J6W 4L2 Tel Fax: CANADA GREAT WESTERN BICYCLE 232 West 7th Ave VANCOUVER, BC VY 1M1 Tel Fax: CHINA HONG KONG IRON ORE CO LTD 3/F, WING WAH INDUSTR.BUILDING YEUNG UK ROAD TSUEN WAN, NEW TERRITORIES HONG KONG Tel / ccheng@ironorechina.com CHEUNG KEE CYCLE CO Number 1b, Fuk Yip Building No. 12 Kik Yeung Road Yuen Long N.T. HONG KONG Tel sales@ckcycle.com CHILE RAFAEL BURGOS S.A. Arturo Prat, 1032 SANTIAGO Tel. +6 2/ Fax +6 2/ CYPRUS RACING CYCLES LTD Prodromou , Strovolos Nicosia, Cyprus tel: fax: cyprus@racingcycles.eu CZECH REPUBLIC SIRER s.r.o. Vit. Halka BEROUN Tel Fax: campagnolo@sirer.cz Web: DENMARK PEAK BIKE APS Svejsegangen 3-1 TH 2690 Karlslunde DENMARK Tel info@peakbike@dk FINLAND VELOSPORT KY Mäkelänkatu HELSINKI, FINLAND FI Finlandia Tel Fax FRANCE CAMPAGNOLO FRANCE SAS ZA du Tissot 4230 ST GENEST - LERPT Tel Fax: GREECE CYCLES FIDUSA - GIORGIO VOYATZIS & CO. Th. Sofuli RHODOS Tel Fax: ACTIVE ZONE NETWORK S.A. Varis-Koropiou & Makedonias, VARI. ATHENS Tel / info@cyclist.gr RACING CYCLES GREECE LTD Olympic Tennis Center Amarysias Artemidos & Pittara 1123, Marousi Attiki Tel sales@racingcycles.eu ISRAEL AMIT LEVINSON LTD 2 Sheshet Hayamim Str. - QIRYAT HAIM POB 22 ZIP Tel Fax: JAPAN CAMPAGNOLO JAPAN LTD 6 Yoshida-cho, Naka-ku, YOKOHAMA JAPAN Tel Fax: NEW ZEALAND WH WORRALL CO. LTD. 43 Felix St./Penrose - P.O. Box AUCKLAND Tel Fax: POLAND P.H.U. WERTYKAL S.C. UL. RODZINY POGANOW ZABIERZOW Tel. +48/12/ /604/ serwis@wertykal.com Web: SINGAPORE MALAYSIA - INDONESIA TRIMEN VENTURES PTE LTD 31 BUKIT BATOK CRESCENT #01-13 WCEGA PLAZA SINGAPORE Tel Fax: KIAN HONG CYCLE PTE LTD 13 KAKI BUKIT ROAD 1 #02-08 EUNOS TECHNOLINK SINGAPORE Tel smiek@khcycle.com.sg SPAIN CAMPAGNOLO IBERICA S.L. Avda. de Los Huetos 46 Pab VITORIA Tel Fax: SLOVAC REPUBLIC ZANZO S.R.O. Kysucky Lieskovec BRATISLAVA Tel Fax: SLOVENIA MAXISPORT D.O.O. Smartinska cesta LJUBLJANA Tel Fax: service@maxisport.si Web: SOUTH AFRICA CYCLING J&J (PTY) LTD. 169 Meerlust Street Willow Glen PRETORIA Tel Fax: SOUTH KOREA DAEJIN INTERNATIONAL 977-6, DAEJAM-DONG NAM-GU POHANG KYOUNGSANGBUK-DO Tel / info.bianchi@yahoo.co.kr DONGJIN IMPORTS CO LTD 60- Banghak-Dong Dobong-Gu SEOUL Tel / kenney.dongjin@gmail.com SWITZERLAND SWISSBIKE PIERO ZURINO GMBH Pilatusstr DIERIKON Tel Fax: U.G.D. SPORT DIFFUSION S.A. La Taille CERNIER Tel Fax: info@ugd.ch TAIWAN, MAINLAND CHINA COLMAX INTERNATIONAL LTD TAIWAN BRANCH (H.K.) No.70, TAIYI RD., RENDE DIST. TAINAN CITY TAIWAN Tel Fax: charis@colmax.com.tw Web: THAILAND UWC Ltd. (TCA) - Service center Bangkok 777/, Mue, TIP 6, T.Bangpla A.Bangplee, Samutprakarn 1040 Thailand Tel : Fax : UWC/TCA Service Center - Chiang Mai 44/1 Devarit Rd., T.Changpurk A.Muang, Chiang Mai 0300 Tel : Fax : UWC/TCA Service Center - Hat Yai 1899/23 Panpruksa, Sanambin-Lopburiramet Rd., T. Kuanlang A. Hat Yai, Songkla Tel : Fax : UNITED KINGDOM CHICKEN CYCLEKIT Unit b2, Cherrycourt Way LU7 4UH BEDFORDSHIRE Tel Fax: sales@chickencyclekit.co.uk UNITED KINGDOM CYCLESPORT NORTH LTD Unit 363 LEACH PLACE WALTON SUMMIT CENTRE BAMBER BRIDGE - PRESTON LANCASHIRE Tel. +44 (0) Fax: +44 (0) sales@cyclesportnorth.co.uk Web: VELOTECH CYCLING LTD 37 Dinglederry Olney Bucks MK46 ES BUCKINGHAMSHIRE Tel velotechcycling@aim.com I-RIDE 7-8B Mid Sussex Business Park Ditchling Coon Ind. Est. Folder Lane East Ditchling, Sussex BN6 8SE Tel. +44 (0) Fax: +44 (0) service@i-ride.co.uk info@i-ride.co.uk UNITED STATES CAMPAGNOLO NORTH AMERICA INC. 431 Avenida Encinas, Suite C CARLSBAD CA Tel Fax: OCHSNER INTERNATIONAL INC 246 E. Marquardt Drive - WHEELING Il Tel Fax: QUALITY BICYCLE PRODUCTS 6400 W. 10th Street BLOOMINGTON, MN Tel Fax: THE HAWLEY COMPANY, INC South Lake Drive LEXINGTON, SC Tel x 192 Fax: SERVICE CENTER

11 SALES NETWORK HEADQUARTERS BRANCH OFFICES AGENT NETWORK CAMPAGNOLO S.R.L. Via della Chimica, Vicenza - ITALY Tel Fax: sales@campagnolo.com SALES NETWORK ARGENTINA ANGEL DIAZ Av.Mosconi 22 BUENOS AIRES info@rodadosdiaz.com.ar Tel AUSTRALIA DE GRANDI CYCLE AND SPORTS 419 Moorabool Street 3220 GEELONG (VICTORIA) Tel shane@degrandi.com.au BIKE SPORTZ IMPORTS 23C & 23D Industrial Drive BRAESIDE 319 (VICTORIA) Tel jnunan@bikesportz.com.au AUSTRIA NSPORTS HANDELSAGENTUR ALEXANDER NIEDERSTETTER Goethestraße Hohenems VORARLBERG Tel Fax: alexander@nsports.at Web: BELGIUM BIKES & PARTS ROLAND VERVAET Klipsenstraat LOKEREN Tel (0) Fax: 0032 (0) Web: MINERVA N.V. Schoebroekstraat 38 B-383 PAAL-BERINGEN Tel / Fax / Web: VDB PARTS N.V. Industriepark Noord 24 A SINT- NIKLAAS Tel (0) Fax: 0032 (0) Web: BRAZIL DIPSA Distribuidora de Pecas e Acessorios Ltda. Rua Barao do Rego Barros 10 CEP São Paulo - SP Brazil Tel. () (11) Web: dipsa@dipsa.com.br dipsa@dipsa.com.br CANADA CYCLES LAMBERT 1000 rue des Riveurs, Lévis, QUEBEC G6V 9G3 Tel Fax: FRANCE CAMPAGNOLO FRANCE SASU ZA du Tissot 4230 St GENEST - LERPT Tel Fax: campagnolo@ campagnolo.fr GERMANY CAMPAGNOLO DEUTSCHLAND GMBH Alte Garten LEVERKUSEN Tel Fax: campagnolo@ campagnolo.de CANADA GREAT WESTERN BICYCLE 232 West 7th Ave VANCOUVER, BC VY 1M1 Tel Fax: MARINONI 1067 Levis TERREBONNE, QC, Canada J6W 4L2 Tel CHILE KEDRUK Y VIROVKO LTDA - KYV CYCLING Lo Beltran 1979 Vitacura SANTIAGO CILE info@kyvcycling.cl Tel. +6 2/ RAFAEL BURGOS S.A. Arturo Prat, 1032 SANTIAGO Tel. +6 2/ Fax +6 2/ CHINA HONG KONG BEIJING St.Rider Trading CO.,LTD. A-6 rows of 6,Gao Bei Dian NEW VILLAGE,CHAO YANG District Beijing,China Tel: Fax: zhangjuzheng@striderchina.com CHEUNG KEE CYCLE CO Number 1b, Fuk Yip Building No. 12 Kik Yeung Road - Yuen Long N.T. HONG KONG Tel sales@ckcycle.com IRON ORE CO LTD 3/F, WING WAH INDUSTR.BUILDING YEUNG UK ROAD TSUEN WAN, NEW TERRITORIES HONG KONG Tel / ccheng@ironorechina.com THE WING S COMPANY 1b,Maple Court 222 Fa Yuen St. Mongkok Kowloon HONG KONG Tel the_wings_co@hotmail.com COLOMBIA STRONG MAN CALLE 68 NR BARRO 7 DE AGOSTO BOGOTA COLOMBIA JAPAN CAMPAGNOLO JAPAN LTD 6 Yoshida-cho, Naka-ku, YOKOHAMA Tel Fax: info@campagnolo.jp SPAIN CAMPAGNOLO IBERICA S.L. Avda. de Los Huetos 46. pab VITORIA Tel Fax: campagnolo@ campagnolo.es CYPRUS RACING CYCLES LTD Prodromou , Strovolos Nicosia, Cyprus tel: fax: sales@racingcycles.eu CZECH REPUBLIC SIRER s.r.o. Vit. Halka BEROUN Tel Fax: campagnolo@sirer.cz Web: DENMARK PEAKBIKE APS Svejsegangen 3-1 Th 2690 KARLSLUNDE DENMARK Tel info@peakbike@dk ESTONIA DENARO TEAM Männiku tee 96G TALLIN ESTONIA Tel mihkel@e-bike.ee FRANCE CAMPAGNOLO FRANCE ZA du tissot 4230 SAINT GENEST LERPT Tel Fax : GERMANY ASTRO Rad + Teile + Zubehör Angerstraße BAD STAFFELSTEIN Tel info@astro-rad.de Web: CCM-Sport GmbH Von-Wrangell-Str. 339 RHEINBACH Tel ccm-sport@t-online.de Web: DIEGELMANN & JACOBI GmbH In den Nassen HOFHEIM AM TAUNUS Tel Web: HERMANN HARTJE KG Deichstraße HOYA Tel info@hartje.de Web: RA-CO GmbH Fichtenweg KERSPLEBEN Tel service@ra-co.de Web: TAIWAN PRIMATEK LTD No. 1, Gongyequ 37th Rd., Xitun Dist., Taichung City 407, Taiwan R.O.C. Tel Fax: UNITED STATES CAMPAGNOLO NORTH AMERICA INC. 431 Avenida Encinas, Suite C - CARLSBAD CA U.S.A. Tel Fax: info@campagnolona. com GERMANY RaiKo GmbH Radsportgroßhandel Feldstr MECKENHEIM Tel / info@raiko.de Web: ENGELBERT WIENER BIKE Parts GmbH Max-Planck-Str SENNFELD BAYERN Tel info@bike-parts.de Web: GREECE ACTIVE ZONE NETWORK S.A. Varis-Koropiou & Makedonias, Vari. ATHENS GREECE Tel / info@cyclist.gr CYCLES FIDUSA Th. Sofuli RHODOS GREECE Tel fidusagv@otenet.gr RACING CYCLES LTD 002 OAKA - TENNIS OLYMPIC CENTER 38 ATHALASSIS AVENUE, OFF.101 STROVOLOS - NICOSIA CYPRUS ISRAEL AMIT LEVINSON LTD 2 Sheshet Hayamim Str. Qiryat Haim Pob 22 ZIP ISRAEL Tel info@amitbike.co.il ITALY For information on the distribution network in Italy please contact Campagnolo S.r.l. headquarters JAPAN NICHINAO SHOKAI 221 Shinzen-cho, Soka SAITAMA, Tel Fax info@nichinao.co.jp KAWASHIMA CYCLE SUPPLY Kitasho-cho, Sakai-ku, Sakai OSAKA JAPAN Tel Fax: info@riogrande.co.jp BENELUX INTERNATIONAL CYCLE CONNECTION I.C.C. Counicatielaan A 438 BV TERNEUZEN NETHERLAND Tel (0) Fax: + 31 (0) info@i-c-c.nl Web: JAPAN DINOSAUR Kitanoshonishi-machi, Nara-shi NARA, JAPAN Tel Fax: info@dinosaur-gr.com YOKOHAMA SANNOW SPORTS Higashikibougaoka, Asahi-ku YOKOHAMA, JAPAN Tel Fax: info@sannowsports.jp NETHERLAND JUNCKER BIKE PARTS Fokkerstraat KV - VEENENDAAL Tel (0) Fax: 0031 (0) Web: HANDELSONDERNEMING TEHAVA B.V. Tomeikerweg RB - GELEEN Tel (0) Fax: 0031 (0) Web: NEW ZEALAND DE GRANDI CYCLE & SPORTS NZ LTD. 19 Nuttall Drive 8022 HILLSBOROUGH-CRISTCHURCH NEW ZEALAND Tel jonny@degrandi.co.nz W.H.WORRALL & CO. LTD. 43 Felix Street Penrose PO box Auckland New Zealand Tel David@worrall.co.nz NORWAY RACING DEPOT A/S GRAVARSVEIEN, 36 SANDNES Tel morten.forus@racingdepot.no PHILIPPINES YKK Trading Legaspi Street CEBU CITY 6000 PHILIPPINES Tel johngm@ykkbikes.com SINGAPORE - INDONESIA KIAN HONG CYCLE PTE LTD 13 KAKI BUKIT ROAD 1 #02-08 EUNOS TECHNOLINK SINGAPORE Tel smiek@khcycle.com.sg UNITED KINGDOM SELECT CYCLE COMPONENTS The White House Main Street NEWTON NI13 8HN - ENGLAND Tel rosafio@ selectcyclecomponents.com SINGAPORE - INDONESIA TRIMEN VENTURES PTE LTD 31 BUKIT BATOK CRESCENT #01-13 WCEGA PLAZA SINGAPORE Tel bryan.chew@pacific.net.sg SLOVENIA MAXISPORT d.o.o. Letaliaka c Lubljana-SLOVENIJA Tel service@maxisport.si SOUTH AFRICA RIBBENS INTERNATIONAL CC 169 Meerlust Street - Willow Glen PRETORIA SOUTH AFRICA Tel jr@jjcycling.co.za SOUTH KOREA DAEJIN INTERNATIONAL 1 HYOSEONG-RO, NAM-GU POHANG-SI GYEONGSANGBUK-DO SOUTH KOREA Tel / info.bianchi@yahoo.co.kr DONGJIN IMPORTS CO LTD 60- Banghak-Dong Dobong-Gu SEOUL SOUTH KOREA Tel / kenney.dongjin@gmail.com SPAIN COMET DISTRIBUCIONES COMERCIALES SL POLIGONO ERRATZU, 440 APDO URNIETA (GUIPUZCOA) Tel Fax: comet@comet.es JAIME LLORENTE S.L.DIST.CICLISTAS CAPITAN BLANCO ARGIBAY, 139 MADRID Tel Fax: info@jaimellorente.com CASA MASFERRER, S.A. POL.IND.CONGOST AVDA. S.JULIAN GRANOLLERS (BARCELONA) Tel Fax: masferrer@casamasferrer.com SWITZERLAND GPR AG Neugrütstraße 4 b USTER Tel info@gprag.ch Website: SWISSBIKE PIERO ZURINO GmbH Pilatusstrasse DIERIKON SWITZERLAND Tel parts@swissbike.net Web: SWITZERLAND UGD SPORT DIFFUSION SA La Taille 203 CERNIER Tel info@ugd.ch Website: TAIWAN - CHINA COLMAX INTERNATIONAL LTD TAIWAN BRANCH (H.K.) No.70, TAIYI RD., RENDE DIST. TAINAN CITY TAIWAN Tel Fax: charis@colmax.com.tw Web: THAILAND UWC LTD 777/ Moo.9 Krongkarn Tip 6 BANGPLA, BANGPLEE SAMUTPRAKAM THAILAND Tel kanate@uniwave.net UNITED KINGDOM CYCLESPORT NORTH LTD Unit 363 LEACH PLACE WALTON SUMMIT CENTRE BAMBER BRIDGE - PRESTON LANCASHIRE Tel. +44 (0) Fax: +44 (0) sales@cyclesportnorth.co.uk Web: I-RIDE.CO.UK 13 Apex Park - Diplocks Way BN27 3JU EAST SUSSEX UNITED KINGDOM Tel. +44 (0) Fax: +44 (0) campagnoloservice@ jimwalker.co.uk CHICKEN CYCLEKIT Unit b2, Cherrycourt Way LU7 4UH BEDFORDSHIRE UNITED KINGDOM Tel. +44 (0) Fax: +44 (0) sales@chickencyclekit.co.uk MIKE DIXON IMPORT LTD UNIT 4 WELLINGTON POINT AMY JOHNSON WAY BLACKPOOL BUSINESS PARK BLACKPOOL - GB Tel. +44 (0) mdi.ltd@btconnect.com J.D.WHISKER LTD BROWNFIELDS WELWYN GARDEN CITY HERTFORDSHIRE ENGLAND Tel. +44 (0) U.S.A. ACCELL NORTH AMERICA 7620 S. 192nd Street KENT, WA Tel Fax: EURO ASIA IMPORTS 393 Foothill Blvd LA CRESCENTA, CA USA Tel Fax: BTI - BICYCLE TECHNOLOGIES INTERN. 33 VELOCITY WAY SANTA FE - NEW MEXICO QBP 6400 W. 10th Street BLOOMINGTON, MINNESOTA 438 Tel Fax: / / OCHSNER INTERNATIONAL 246 E Marquardt Drive WHEELING, IL Tel. (847) Fax: (847) J&B IMPORTS J&B Importers, Inc SW 128th St. MIAMI, FL Tel. (30) Fax: GITA SPORTING GOODS STEELE CREEK ROAD CHARLOTTE, N.C Tel. (800) Fax: (704) THE HAWLEY COMPANY 1181 South Lake Drive LEXINGTON, SC Tel x149 Fax: SECURITY BICYCLE ACCESSORIES,INC. 32 INTERSECTION STREET HEMPSTEAD, N.Y.110 Tel. (800) Fax: (16) SALES NETWORK

12 CAMPAGNOLO S.R.L. Via della Chimica, Vicenza - ITALY Phone: Fax: WINS Campagnolo, Campy, Super Record, Record, Chorus, Athena, EPS, CT, Centaur, Veloce, Mirage, Xenon, ESP, ESP ACTUATION SYSTEM, Ultra-Shift, Vari-Cushion, No-Bulge, OS-Fit, Ultra-Link, CULT, USB, XPSS, MPS, Power Torque System, Power-Shift, Embrace Technology, S2 System, CSD, BE 11, Revolution 11, Campy Tech Lab, 2-Way Fit, Ultra-Fit Tubeless, 3Diamant TM, Hyperon, Neutron, Proton, Eurus, Zonda, Scirocco, Vento, Vento Asyetric, Bora, Ghibli, Pista, Khamsin, Khamsin Asyetric, Shamal, Bullet, Time Trial, Ergobrain, Syetric Action, Z-shape, M-brace, Even-O, Superlative, Floating-Link-Action, HD-Link, HD-L, Exa-Drive, Ultra-Drive, Pro-Fit, Pro-Fit PLUS, Differential brakes, Threadless, Hiddenset, Hiddenset TTC, TTC, Ergopower, BB System, C10, C9, ED, UD, Ultra Narrow, Over-Torque, UT, Ultra-Torque, Over-Torque Technology, Ultra-Hollow, Skeleton, Quick Shift, QS, Escape, Infinite, Champ Triple, Race Triple, Comp Triple, HPW, Mega-G3, G3, Grouped Spokes, DPRO, Dual Profile, Ultralinear-Geometry, Ultralinear, Differential rims, Differential spokes, Ultra, Ultra Aero, DRSC, RDB, Spokes Anti-Roation System, Spoke Dynamic Balance, Comp Ultra, Comp One, 3Diamant, Dynamic Balance, Full Carbon, Multidirectional, Unidirectional, AC-H, AC-S, SC-S, Big, Miro, Pro-Shop, Tecnologia ed Emozione are Campagnolo Srl Trademarks. VINCE GAGNE GEWINNT Cronitect is a registered Trademark of Schaeffler Group QR Code is registered trademarks of DENSO WAWE INCORPORATED. Copyright(C) DENSO WAVE INCORPORATED All right reserved Credits: Graphic concept CONDENSED srl - Credits: Racing photos: Tim De Waele / Product photos: Studio Nova 10