Compact Radio Signal Monitoring Solution

Transcription

1 Compact Radio Signal Monitoring Solution Part of the product line

2 Product overview go2monitor is a modular software solution for receiver control, classification, demodulation, decoding and recording of HF, VHF and UHF signals. New threats demand superior information, acquired and analysed from all potential sources. The increasing density of cryptic signals produced by new or modified modems demands the use of sophisticated demodulation and decoding systems. go2monitor is an easy to use, automated interface for monitoring tasks. This single tool provides all the necessary processing steps - classification, demodulation, recording and decoding - in a fully integrated environment. Key features and benefits 1 MHz wideband input (spectrogram, Fast Fourier Transform (FFT), classifier) Automated classification and production using an extensive decoder library State-of-the-art GUI includes window presets, drag & drop, and integrated station list Integrated receiver control with direct Software Defined Radio (SDR) interface Parallel processing of up to eight buffered Digital Down Conversion (DDC) production channels Few lost or unidentified signals with a high number of produced signals Fast reaction to modified modems Keep the knowledge in your organisation High order of automation Decoder Description Language (DDL) support. Expand your decoder list without sharing any information. Part of the product line Upgradeable for new requirements provided by additional go2signals products! 2

3 Product overview Never miss a signal go2monitor enables the operator to monitor up to eight signals in parallel. Its automatic buffering of the complete wideband signal input allows easy switching to new signals without loss of information. Known signals can be monitored easily thanks to the included station list and extensive decoder library. The available production channel will automatically process classification, recognition and decoding. Spectrum display for wideband overview and production channels Homeland security and telecommunications agencies Identification and monitoring of new or existing signals is a primary task for telecommunications administrations and homeland security agencies. Modern telecommunication systems defy manual techniques, making the automatic go2monitor the obvious solution. Production of Pactor II modem Military COMINT and Signals Surveillance Out-of-area operations in an unknown electromagnetic environment must be supported by monitoring and analysis. go2monitor is perfectly suited for rapid reaction task forces and advanced commands. All you need is go2monitor, a laptop, a receiver and an antenna! Production of Tetra modem 3

4 Workflow go2monitor displays an overview of the signal scenario utilising a spectrogram and a spectrum FFT. Various display settings, cursors, and a dynamic zoom are available. Signal selection Using the wideband view the operator is able to select signals to be extracted by Digital Down Conversion (DDC) simply by selecting the desired signal in either the spectrum or spectrogram display. The output of a DDC is assigned to a channel and the window is extended to display the production channel. Alternatively, the wideband classification results could be used to select signals of interest. Modulation, bandwidth, symbol rate, shift and other parameters are shown for all classified signals within the wideband frequency range. Display of automatic classification Production channel A production channel features a detailed display of the selected signal. Spectrograms, FFT displays and the wideband view are easily configurable. A production channel offers different operating modes. In the recognition and decoding mode an assigned signal will be decoded automatically. In the classification, recognition and decoding mode suitable decoders will be automatically selected depending on the classification result. The result view can be configured using the Extensible Stylesheet Language (XSLT). Up to eight production channels can be used in parallel. Display of four production channels 4

5 Workflow Automatic recognition and decoding A production channel uses a configurable list of decoders and checks which of these decoders matches the signal. The signal is demodulated, decoded and the results are displayed in the result view. The decoder lists can be configured, loaded and saved. This way the operator can define specific decoders to be used according to his monitoring task. A previous classification enhances the production. The go2decode (go2signals product for recognition, demodulation, analysis and decoding) can be used for analysis and creation of a new decoder, which can be used in go2monitor. Display of a production channel decoding STANAG modem Signals of interest can easily be added to an integrated station list. Entries in the station list can be assigned to production channels using drag & drop or the context menu. Wideband overview with station list Add signals to the station list directly from your production channel 5

6 Technical specifications Decoders For alias names please visit other decoders on request. HF decoders 2 channel ITA-2 RTTY AUTOSPEC CIS AT3104 Frost PACTOR I RACAL-ARQ ACARS HF Baudot sync (1 stop bit) Clover II FROST1 PACTOR I FEC ROU-FEC Alcatel 801H Baudot sync (2 and 3 stop bits) Clover 2000 FSK 400/500 PACTOR II RUM-FEC ALIS Baudot async Clover 2000 Broadcast F7B Baudot PACTOR II FEC RS-ARQ ALIS 2 Baudot F7B Clover 2500 F7B Morse PACTOR III SI-ARQ AMOR BEE Clover 2500 Broadcast Globe Wireless FSK Piccolo MK6 SI-FEC AMOR 96 BF6 Baudot CODAN 3012 Chirp Globe Wireless PSK Piccolo MK12 SITOR-A AMTOR BULG-ASCII CODAN Selcal Globe Wireless Pactor Piccolo 6 SITOR ARQ Annex-10 CCIR 242 CODAN Channel PSK ARQ-1000 duplex CCIR 342 CODAN Channel PSK GMDSS Piccolo 12 SITOR-B G-TOR Pol-ARQ SITOR FEC ARQ-28 CCIR CODAN 8580 Golay PSK10 SP14 ARQ-58 CCIR 476 A/B CODAN 9001 Chirp GW DATAPLEX PSK10-AM SPREAD 11 ARQ6-90 CCIR CROWD-36 HFDL PSK31 SPREAD 21 ARQ6-98 CCIR 518 Variant Coquelet13 HNG-FEC PSK31-AM SPREAD 51 ARQ-E Cyc4 CCIR 519 Variant Coquelet-8 ICAO Selcal PSK31-FEC Saud-FEC ARQ-E Cyc8 CHU Coquelet-8 FEC IRA-ARQ PSK50-AM SWED-ARQ ARQ-E3 CIS Coquelet-80 ITA-2 Twin PSK63 T-600 ARQ-M1 CIS-11 Coquelet-100 MERLIN PSK63-FEC TDM 242 ARQ-M2-242 CIS-12 Coquelet-Mk1 MEROD PSK125 TDM 342 ARQ-M2-342 CIS-14 CW-Morse MFSK 8 PSK125-FEC TDM Channel ARQ-M4-242 CIS-20 DGPS MFSK 16 PSK250 TOR dirty ARQ-M4-342 CIS-36 DSC-HF Morse PSK220-FEC TORG 10/11 ARQ-N CIS DUP-ARQ MS5 QPSK31 Twinplex ARQ-SWE CIS FEC-A MD674 QPSK63 Visel ARTRAC CIS 81 FEC12 NUM 13 QPSK125 YUG-MIL ASCII 7 Bit CIS FEC 100 Olivia QPSK250 ASCII 8 Bit CIS FIRE Packet RAC-ARQ V/UHF decoders AIS DSC-VHF EURO5 Modat PZVEI ZVEI ACARS VHF DMR FLEX Natel POCSAG ZVEI-1 CCITT dpmr FMS-BOS NMT450 Tetra ZVEI-2 CCIR-1 DZVEI GMDSS-VHF Packet 1200 Tetrapol ZVEI-3 CCIR-2 EEA Golay Pager Packet 9600 VDEW CityRuf EIA MPT1316 PCCIR VDL 2 CTCSS EURO MPT1327 PDZVEI VDL 3 Premium decoders ALE 2G LINK 11 SLEW MIL B App.C STANAG 4197 STANAG 4529 STANAG 5511 CHN 4+4 MD 522 MIL Tone STANAG 4285 STANAG 4539 STANAG 5511 SLEW Haegelin-Cryptos MIL A ser. MIL A STANAG 4415 STANAG 4539 HDR TADIL A HC-ARQ MIL A App. C MIL B STANAG 4481 (FSK) STANAG 5065 TADIL B LINK 11 CLEW MIL B MIL-M-55529A STANAG 4481 (PSK) STANAG

7 Technical specifications Demodulators AM MPSK 2, 4 F7B ASK 2 PSK 8 Multitone (FSKn) FSK 2 matched filter CW PSK 2, 4, 8, A/B USB/LSB F1A QPSK MFSK 2 F6 ASK 2 MSK FSK 2, 3, 4 ASK 4 PSK 8 OFDM GMSK DPSK 2, 4, 8, A/B QAM 16, 32, 64, 128, 256 MDPSK 2, 4 FM TFM 3 Classifier Technical parameters Specification Recognition quality (Eb/No) for a detec- Max. signal bandwidth Min. carrier to noise ratio LSB/USB, AM, FM Morse FSK 2 FSK 4 MSK Multitone (FSKn) (D)PSK 2 A/B (D)PSK 4 A/B (D)PSK 8 A/B HF 20 khz, V/UHF 50 khz 6 db CPM m = 0, ms (5-330 Bd) 5-64 tones tion rate > 90% and false alarms < 1% db db db 7-10 db, A/B Decision: 8-10 db 8-12 db, A/B Decision: db HF: 8-12 db, A/B Decision: db V/UHF: db, A/B Decision: 12/14 db Specifications overview Data acquisition Localisation Documentation Recommended PC hardware OS Supported receivers Digital IF (complex baseband I/Q), bandwidth 1 MHz English (others on request) Printed user manual / PDF Online-Help Min. Intel I5, 4 GB Ram, 8 GB for 8 channel version, Screen resolution 1920 x 1080 or two displays 1280 x 1024 pixels Windows XP/7 Perseus, R&S EM 100, IZT R30XX, R32XX, R33XX, Winradio, RF-Space (ask for additional receivers) Order information Product code go2-mon1 go2-mon2 go2-mon4 go2-mon8 Stations-db2013 Description go2monitor with one production channel go2monitor with two production channels go2monitor with four production channels go2monitor with eight production channels Klingenfuss 2013 utility and broadcast station list prepared for go2monitor 7

8 ... monitoring a connected world PLATH AG Stauffacherstrasse Bern Switzerland Tel: Fax: info@go2signals.ch Further information on Version: V1.1 / (Subject to modification)