Griplok. Tube Fittings. Quality Instrumentation Fittings

Transcription

1 ube ittings Quality Instrumentation ittings

2 ompany Information 1926 SSP ittings orp. is founded in leveland, Ohio, U.S.. SSP begins as a contract manufacturer of screw machine products in brass and carbon steel to general industry. 1940s World War II shifts the company s focus to production of fittings for tubing, pipe, and hose. ollowing the war, SSP s customers are able to satisfy their own requirements without relying on outside companies for production. SSP contracts. 1970s New ocus. By the early 1970s, SSP embarks on a market & manufacturing driven strategy of producing quality fittings from difficult-to-machine alloys. he performance requirements of customers utilizing these materials in industries as diverse as marine, defense, offshore oil, and aerospace, drive SSP to establish both conformance quality standards, and service levels, which are significantly ahead of general industry at the time. 1980s he Works. hings are really happening for SSP. he company establishes a product line and distribution channel for hydraulic fittings, which require significant investments in a new, state-of-the-art facility south of leveland. SSP builds a 165,000 sq. ft. facility to house our vertically-integrated Works, including, by now, tool & die design & production, custom closed-die forging, machining, finishing operations, assembly and test. With over 200 work centers, SSP s winsburg Works is among the largest single-site facilities in the entire industry. 1990s Market xpansion. In response to continued customer requests for alternative product offerings in the Instrumentation fitting and valve marketplace, strategic plans were developed to design, manufacture and distribute merican-manufactured, tube fittings and valves as direct alternatives to the registered trademark brands of Swagelok, Parker PI and Hoke yrolok. SSP introduces fully-validated design alternatives under brand names uolok RI, Unilok, tube fittings; ruit pipe, weld, hose and adapter fittings; and lolok valves he New orce. SSP becomes the fastest-growing specialty fitting manufacturer in the United States selling through independent distributors. With an established, efficient US distribution network in place, SSP expands into global markets with additional fabricated products including tubular and hose assemblies. Significant continued investments allow SSP to renew our commitment to providing customers with best value through time-based competitive advantage, maximum objectivity in our product recommendations based on mastery over an ever-increasing range of fluid system fitting designs, and a commitment to integrity and honesty in our business relationships. Swagelok and ajon are registered trademarks of Swagelok o. Parker PI and ParkerM are registered trademarks of Parker Hannifin. Hoke yrolok and Hoke are registered trademarks of Hoke Inc. uolok, Unilok,, ruit & lolok are registered trademarks of SSP ittings orp. Viton and eflon are registered trademarks of.i. dupont Nemours and o. Monel is a registered trademark of Inco lloys International NOI: his publication is an uncontrolled copy of a controlled document. SSP has made every reasonable effort to insure the accuracy of the information contained in this publication, and is not to be held liable in any manner for any mistakes, omissions, typographical and/or printing errors. 2

3 How to Order ube ittings Material esignator (See hart #1) tube fittings are ordered by specifying part numbers as listed in this catalog. he part numbers are easy to understand, and describe tube fittings that are completely assembled and ready to be installed. he following explains the part numbering system: xample: ISS4M2 ISS 4 M 2 SSP Brand esignator = double ferrule instrumentation quality tube fittings ype of tube fitting designator (See hart #3) ube O.. (See hart #2) or special application tees, a 3rd end connection is required for a reduced size tube O.. or a differing type of end connection such as MNP, NP, etc. (See hart #2) 2nd end connection is required for a reduced size tube O.. or a differing type of end connection such as MNP, NP, etc. (See hart #2) HR #3 NOS: ll onfigurations: Only one size indicator is necessary when all of the connections are the same type and size. Straights and lbows: Specify the tube end first followed by the smaller tube end or differing type of connection (MNP, NP,etc.) ees and rosses: ees are described by first sizing the run (1 to 2) and then the branch (3). rosses are described by first sizing the run (1 to 2) and then the branch (3 to 4). See figure 1. igure Specials: SSP Instrumentation manufactures a wide variety of special application tube fittings. ontact your local distributor for details regarding availability of special tube fitting configurations, materials and sizes. HR #1 Monel is a registered trademark of Huntington lloy eflon is a registered trademark of.i. dupont de Nemours Instrumentation Materials esignator Material IB Brass ISS 316 Stainless Steel IM Monel IP* P eflon I* P eflon IN* Nylon * errules Only HR #2 Size esignators ube O.. or MNP, NP Size esgn. Size* 1 1/16" 2 1/8" 3 3/16" 4 1/4" 5 5/16" 6 3/8" 8 1/2" 10 5/8" 12 3/4" 16 1" *ube O. expressed in sixteenths of an inch ype of itting esignator N NBU N NU B BM BR BRU BU P U U B R R HB HB M MS MB MBS M MB MRS MR MS M MR MS M45S M45 MPW MPW MR MRS OM OS P P R RP RU SW SWU U US U U BN S KN N R I escription of ube itting ypes N dapter N Bulkhead Union emale N dapter N Union Bulkhead emale onnector Bulkhead Male onnector Bulkhead Reducer/dapter Bulkhead Reducing Union Bulkhead Union ap alibration Union ielectric dapter ielectric Union emale dapter emale Branch ee emale onnector emale onnector to ISO apered emale lbow emale Run ee Hose Barb dapter Hose Barb onnector Male dapter Male dapter Straight hread Male Branch ee Male Branch ee Straight hread Male onnector Male onnector Bored hrough Male onnector to ISO Parallel Male onnector to ISO apered Male onnector Straight hread Male lbow Male lbow to ISO apered Male lbow Straight hread Male 45 Straight hread lbow Male 45 lbow Male Pipe Weld onnector Male Pipe Weld lbow Male Run ee Male Run ee Straight hread O Ring Seal Male Pipe onnector O Ring Seal Straight hread onnector Plug Port onnector Reducer/dapter Reducing Port onnector Reducing Union ube Socket Weld lbow ube Socket Weld Union Union Union ross Union lbow Union ee OMPONNS Bulkhead Nut ront errule errule Set Knurled Nut Nut Rear errule ube Insert 3

4 ube ittings SIN tube fittings are designed and manufactured to provide a reliable, leak-proof connection in instrument and process tubing systems. tube fittings consist of four precision-machined components: 1) Body 2) ront errule 3) Rear errule 4) Nut uring make-up, the controlled drive action of the ferrules compensates for variations in tubing materials, hardness, and thickness of the tube wall to provide leak-tight connections in an extensive range of applications. dditionally, in fulfillment of the design criteria, all components are manufactured with stringent tolerances and superior surface finishes to rigorous quality control standards to assure the optimum performance of each component. OPRION hrough critical interaction of precision-machined fitting components with the process tube, a leak-tight seal is achieved. he simple geometric rotation of the nut provides the axial thrust necessary to "coin" the ferrules to the outside diameter of the tube. o eliminate any potential stress on an existing system, the tube fittings have been designed to not transmit installation torque from the tube fittings to the tube. uring the rotary movement of the nut, the internal surface of the nut meets with the rear surface of the rear ferrule to axially move the rear ferrule forward against the back radius of the front ferrule. Simultaneously, the front ferrule is driven forward into the angular section of the fitting body to form a primary metal-to-metal seal. he rear ferrule roll-in locking action occurs on the outside diameter of the tube to complete the sealing action and secure the tube within the fitting. he controlled ferrule drive prevents body distortion and helps compensate for exposure to system variables such as vibration, pressure pulsation and thermal expansion or contraction. QULIY SSP's Quality System has been certified to conform to the ISO 9001:2000 Quality Standard. chievement of this prestigious status further confirms SSP's continuing commitment to quality which is reflected throughout the company in its personnel, policies, equipment, products and service. RI In addition, all tube fittings are manufactured to the technical design specifications and rigid quality control standards of the SSP Instrumentation ivision. Statistical Process ontrol techniques are employed within the manufacturing process to assure timely, meaningful feedback to the production team. ttention to detail, through continual process monitoring and control, provides the necessary manufacturing quality for the instrumentation tube fittings. PKIN tube fittings are individually bagged to assure the highest levels of quality, safety and cleanliness. he protective bags eliminate contamination (tubing burrs, dirt, etc.) from entering the fitting prior to its use, and help to retain the integrity of the factory assembled body, nut, and ferrules. s long as a tube fitting is in its original protective bag, it is identified as "factory new," completely assembled and ready for installation. he individually bagged tube fittings are packaged in convenient, small-lot quantities for easy procurement and handling. dditionally, for efficient product identification and storage, the boxes are colorcoded to the tube fittings' material of construction and have pictorial labels which include the part number, product description and box quantity. 4

5 ube ittings MRILS 316 SINLSS SL straight configuration tube fittings are machined from type 316 stainless steel cold-finished bar stock in accordance with SM Shaped bodies are machined from close-grained 316 stainless steel forgings in accordance with SM ll 316 stainless steel components are heat code traceable with certified material test reports (MRs) available. BRSS straight configuration tube fittings are machined from 360 and 345 premium brass bar stock in accordance with SM B-16 and SM B-453. Shaped bodies are machined from precision forgings of -377 brass in accordance with SM B-124. PRSSUR RINS enerally, tube fittings are rated for pressures equal to the maximum allowable working pressures of the tubing recommended for use with the fittings. However, it is important to note that many specially designed fittings, bored-through fittings and fittings having N, O-Seal and S/MS integral ends may have lower pressure ratings than that of the tubing. (See SSP s Selection uide for Instrumentation ittings and ubing on pages or contact your local uthorized istributor for more information regarding tubing and fitting pressure ratings.) MPRUR ORS tube fittings function reliably in applications ranging from cryogenic temperatures to high temperature bake out with the tube fitting material as the limiting factor. It is important to note that elevated temperatures may affect the maximum working pressure capability of the tubing system. (or more information regarding the effects of temperature on tubing pressure ratings, consult able 5 regarding temperature stress factors in SSP s Selection uide for Instrumentation ittings and ubing on pages ) INRHNBILIY tube fittings are designed, manufactured, quality controlled and distributed to be totally interchangeable with the Hoke yrolok brand of tube fittings. omponent by component examination plainly shows the two brands as completely component-intermixable". he precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance and reliability of service whenever Hoke yrolok and component parts are mixed. dditionally, tube fittings are considered able to be "functionally interchanged" with the Swagelok brand of tube fitting. "unctionally interchanged" allows for the use of a nut and ferrule system with a Swagelok body, or a Swagelok nut and ferrule system with a body. he exceptional quality characteristics of both product lines assure complete product performance whenever the two brands are "functionally interchanged". LIIM WRRNY tube fittings are covered by a published lifetime warranty as printed on the inside back cover of this catalog. UB SLION areful selection and specification of tubing is essential to the performance of a tubing system. When choosing the appropriate tubing material, size and wall thickness, consideration must be given to the system s environment, pressures, temperatures and flows. (or more information on tube selection, please refer to SSP s Selection uide for Instrumentation ittings and ubing on pages ) yrolok Swagelok is a registered trademark of the Swagelok o. yrololok is a registered trademark of Hoke Inc. 5

6 Installation Instructions INIIL INSLLION 1. tube fittings come individually bagged and completely assembled for immediate use. here is no need for disassembly prior to use. Simply remove the tube fitting from it s bag, insert the tube* until it bottoms in the tube fitting body and then hand tighten the nut. (See figure #1) igure #1 *ubing ends should be cut as straight as possible with all O.. and I.. burrs removed. Use of a tubing cutter or guide blocks with a hacksaw is recommended. [NO: or extreme system applications using high pressures or requiring an extra factor of safety, it may be desirable to use a common make up starting point to alleviate the inherent variations in tubing diameters. Installation should begin from a snug position, which is achieved by wrench tightening the nut until the inserted tubing will not move by hand (approximately 1/8 turn). rom this new snug starting point, continue with the recommended installation instructions.] 2. While holding the fitting body stable with a back-up wrench, scribe the nut for a reference point and wrench tighten the nut 1-1/4 turns. (See igures #2 and #3.) igure #2 igure #3 1-1/4 turns for all sizes [NO: or all sizes, tighten plugs (P), machined ferrule end of port connector (P) and the end of the emale N adapter (N) only ¼ of a turn.] RSSMBLY INSRUIONS 1. o reassemble a tube fitting connection, simply insert the tubing with the previously coined ferrules and nut into the fitting body until the front ferrule seats within the fitting body, and then tighten the nut by hand. (See igure #4.) igure #4 Back-Up Wrench [NO: By following proper reassembly procedures, tube fitting connections may be disconnected and reconnected repeatedly.] 2. While holding the fitting body stable with a back up wrench, use a wrench to rotate the nut to the fitting s original installation position (approximately ¼ turn from the hand-tight, snug position) then continue to tighten the nut slightly. (See igure #5.) igure #5 rom original installation position, tighten slightly OMPONN SSMBLY Should individual component assembly of a tube fitting ever be required, careful attention must be given to the proper sequence and direction of the components. (See igure #6.) igure #6 Back-Up Wrench Nut Rear errule ront errule Body Back-Up Wrench 6

7 Pre-Setting ool he pre-setting tool is used to pre-set the ferrules on the tubing for subsequent installation in a fitting body. he pre-setting tool can be especially helpful when an installation must be made in a tight space or hard-to-work area. he presetting tool allows the major portion of the installation work to occur in a more favorable work setting with only the completion of the installation in the hard-to-work area. PR-SIN INSRUIONS 1. Secure the pre-setting tool in a vise. 2. Remove the protective nut, and assemble the nut and ferrules loosely to the pre-setting tool. Insert the tubing through the nut and ferrules until it bottoms in the presetting tool, and then follow the standard tube fitting installation instructions from page 6. (See igures #7 and #7B.) 3. Loosen the nut and remove the tubing with the pre-set ferrules and nut from the pre-setting tool. (See igure #8.) igure #8 4. Installation of the tubing, with the pre-set ferrules and nut in the appropriate fitting body can now be made by following the standard reassembly instructions from page 6. (See igures #9 and #9B.) 5. Return the protective nut to the presetting tool. igure #9 igure #9B igure #7 igure #7B [NO: o extend the life of a presetting tool, lubricate the tool with a lubricant compatible with the system s tubing material, environment and media. lso, at times an oversized or very soft tubing may tend to stick in the presetting tool after make up. o remove the tubing, gently rock the tubing back and forth. Never turn the tube with pliers or another tool as such action may damage the sealing surfaces.] 7

8 Visual Index ube to Male Pipe Male onnector Male onnector ISO Parallel ube to emale Pipe emale onnector Bulkhead emale onnector emale dapter M 11 MRS 12 Male onnector Male onnector ISO Straight Bored hrough 19 B emale Run ee emale lbow emale Branch ee MR 13 Bulkhead Male onnector MB Male dapter 14 R B 23 BM 15 M Male lbow Male lbow M45 Male lbow ISO apered 15 M 16 Male Branch ee ube to ube Union Union Bulkhead Union Reducing Union Union lbow MR Male Run ee 17 MB 18 U 23 BU/BRU 24 RU 25 U 26 Union ee Reducing Union ee Union ross ielectric Union MR 18 U 27 RU 28 US 26 /U 29 8

9 Visual Index ube to Welded System ube Socket Weld Union ube Socket Weld lbow Male Pipe Weld onnector Male Pipe Weld lbow SWU 30 SW 30 MPW 31 MPW 31 ube Stub onnectors/dapters Reducer/dapter Bulkhead Reducer/dapter Port onnector Reducing Port onnector R 33 BR 32 P 36 RP 36 Male dapter emale dapter alibration Union Hose Barb dapter M U1/U2 38 HB 37 Hose Barb onnector HB 37 to 37 lare (N) N Union N Bulkhead Union NU 39 NBU 39 emale N N dapter dapter N 40 N 40 9

10 Visual Index ube to O-Ring Seal & S/MS O-Ring Seal Male onnector O-Ring Seal Male onnector OM 42 OS 42 Male onnector to Straight hread Boss Male lbow to Straight hread Boss MS 43 MS Male lbow to Straight hread Boss Male Run ee to Straight hread Boss ap & Plug ap M45S 44 MRS 45 Male Branch ee to Straight hread Boss Male dapter to Straight hread Boss P 47 Plug MBS 45 MS 46 P 47 omponents Nut Rear errule ront errule N 48 R errule Set Knurled Nut Bulkhead Locknut ube Insert S 48 KN 49 BN 49 I 49 10

11 ube to Male Pipe NU HX B-BOY BOY HX H P-PIP HR Male onnector (M) ube O.. P-NP Male Pipe Size B Opening Min. H 1M1 1/16 1/ /16 5/16 1M2 1/16 1/ /16 7/16 1M4 1/16 1/ /16 9/16 2M1 1/8 1/ /16 7/16 2M2 1/8 1/ /16 7/16 2M4 1/8 1/ /16 9/16 2M6 1/8 3/ /16 11/16 2M8 1/8 1/ /16 7/8 3M2 3/16 1/ /2 7/16 3M4 3/16 1/ /2 9/16 4M1 1/4 1/ /16 1/2 4M2 1/4 1/ /16 1/2 4M4 1/4 1/ /16 9/16 4M6 1/4 3/ /16 11/16 4M8 1/4 1/ /16 7/8 4M12 1/4 3/ /16 1-1/16 5M2 5/16 1/ /8 9/16 5M4 5/16 1/ /8 9/16 5M6 5/16 3/ /8 11/16 6M2 3/8 1/ /16 5/8 6M4 3/8 1/ /16 5/8 6M6 3/8 3/ /16 11/16 6M8 3/8 1/ /16 7/8 6M12 3/8 3/ /16 1-1/16 8M2 1/2 1/ /8 13/16 8M4 1/2 1/ /8 13/16 8M6 1/2 3/ /8 13/16 8M8 1/2 1/ /8 7/8 8M12 1/2 3/ /8 11/16 8M16 1/ /8 13/8 10M6 5/8 3/ /16 10M8 5/8 1/ /16 10M12 5/8 3/ /16 12M8 3/4 1/ /8 1-1/16 12M12 3/4 3/ /8 1-1/16 12M16 3/ /8 1-3/8 14M12 7/8 3/ /4 1-3/16 14M16 7/ /4 1-3/8 16M8 1 1/ /2 1-3/8 16M12 1 3/ /2 1-3/8 16M /2 1-3/8 11

12 ractional ube to ISO hread ittings B Hy H P Male onnector - ISO Parallel (MRS) ube O.. P ISO Male Pipe H Body Hex Part# Hy Nut Hex B Body 2MRS2 1/8 1/ / / MRS4 1/8 1/ / / MRS6 1/8 3/ / / MRS2 1/4 1/ / / MRS4 1/4 1/ / / MRS6 1/4 3/ / / MRS8 1/4 1/ / / MRS4 3/8 1/ / / MRS6 3/8 3/ / / MRS8 3/8 1/ / / MRS4 1/2 1/ / / MRS6 1/2 3/ / / MRS8 1/2 1/ / / MRS8 3/4 1/ / / MRS12 3/4 3/ / / MRS8 1 1/ / / MRS / / NO: RS threaded fittings conform to ISO (International Standards Organization) standards 228/1. he standard gasket for RS fittings is a composite gasket. his gasket features a 300 series stainless steel outer ring with a Buna inner ring bonded to it. 12

13 ractional ube to ISO hread ittings B-BOY H P-PIP HR Male onnector - ISO apered (MR) Part# ube O.. P ISO Male Pipe Min. Opening 2MR2 1/8 1/ /16 7/ MR4 1/8 1/ /16 7/ MR2 1/4 1/ /2 9/ MR4 1/4 1/ /16 9/ MR6 1/4 3/ /16 9/ MR8 1/4 1/ /8 9/ MR2 5/16 1/ /16 5/ MR4 5/16 1/ /16 5/ MR2 3/8 1/ /8 11/ MR4 3/8 1/ /8 11/ MR6 3/8 3/ /16 11/ MR8 3/8 1/ /8 11/ MR4 1/2 1/ /16 7/ MR6 1/2 3/ /16 7/ MR8 1/2 1/ /8 7/ MR12 1/2 3/ /16 7/ MR12 3/4 3/ /16 1-1/ MR /8 1-1/ NO: R threaded fittings conform to ISO (International Standards Organization) standards 7/1. H Hex lat Hex lat B Body 13

14 ube to Male Pipe NU HX B-BOY BOY HX H P-PIP HR Male onnector - Bored hrough (MB) ube O.. P-NP Male Pipe Size B Min. H 1MB1 1/16 1/ /16 5/16 1MB2 1/16 1/ /16 7/16 2MB1 1/8 1/ /16 7/16 2MB2 1/8 1/ /16 7/16 2MB4 1/8 1/ /16 9/16 3MB2 3/16 1/ /2 7/16 3MB4 3/16 1/ /2 9/16 4MB2 1/4 1/ /16 1/2 4MB4 1/4 1/ /16 9/16 4MB6 1/4 3/ /16 11/16 4MB8 1/4 1/ /16 7/8 5MB4 5/16 1/ /8 9/16 6MB4 3/8 1/ /16 5/8 6MB6 3/8 3/ /16 11/16 6MB8 3/8 1/ /16 7/8 8MB8 1/2 1/ /8 7/8 10MB12 5/8 3/ /16 12MB12 3/4 3/ /8 1-1/16 16MB /2 1-3/8 hermocouple onnector o accommodate thermocouples and other sensing probes, the MB series of fittings has been bored through to allow the thermocouple or sensor to extend beyond the end of the fitting s NP thread. NO: Pressure Ratings of bored through tube fittings are reduced. or additional information on a specific fitting s rating, contact your local distributor. 14

15 ube to Male Pipe NU HX B-BOY Hx-JM NU HX BOY HX H x P-PIP HR Bulkhead Male onnector (BM) ube O.. P-NP Male Pipe Size x B Opening Maximum Panel hickness Min. H Hx Panel Hole rill Size 2BM2 1/8 1/ /16 1/2 1/ /64 4BM2 1/4 1/ /16 5/8 5/ /64 4BM4 1/4 1/ /16 5/8 5/ /64 6BM4 3/8 1/ /16 3/4 3/ /64 8BM6 1/2 3/ /8 15/16 15/ /64 8BM8 1/2 1/ /8 15/16 15/ /64 -NU HX 45 H-WRNH P By P-PIP HR 45 Male lbow (M45) ube O.. P-NP Male Pipe Size By Opening Min. H 4M452 1/4 1/ /16 9/16 4M454 1/4 1/ /16 9/16 6M452 3/8 1/ /16 9/16 6M454 3/8 1/ /16 9/16 6M456 3/8 3/ /16 3/4 8M456 1/2 3/ /8 3/4 15

16 ube to Male Pipe NU HX H-WRNH P P-PIP HR By Male lbow (M) ube O.. P-NP Male Pipe Size By Opening Min. 1M1 1/16 1/ /16 1M2 1/16 1/ /16 2M1 1/8 1/ /16 2M2 1/8 1/ /16 2M4 1/8 1/ /16 3M2 3/16 1/ /2 3M4 3/16 1/ /2 4M2 1/4 1/ /16 4M4 1/4 1/ /16 4M6 1/4 3/ /16 4M8 1/4 1/ /16 5M2 5/16 1/ /8 5M4 5/16 1/ /8 5M6 5/16 3/ /8 6M2 3/8 1/ /16 6M4 3/8 1/ /16 6M6 3/8 3/ /16 6M8 3/8 1/ /16 6M12 3/8 3/ /16 8M4 1/2 1/ /8 8M6 1/2 3/ /8 8M8 1/2 1/ /8 8M12 1/2 3/ /8 10M6 5/8 3/ M8 5/8 1/ M12 5/8 3/ M8 3/4 1/ /8 12M12 3/4 3/ /8 14M12 7/8 3/ /4 16M12 1 3/ /2 16M /2 16

17 ractional ube to ISO hread ittings H By P-PIP HR Male lbow - ISO apered (MR) Part# ube O.. P ISO Male Pipe Min. Opening H Wrench Pad Hex lat By 2MR2 1/8 1/ /16 7/ MR2 1/4 1/ /2 9/ MR4 1/4 1/ /2 9/ MR6 1/4 3/ /16 9/ MR8 1/4 1/ /16 9/ MR4 5/16 1/ /16 5/ MR2 3/8 1/ /8 11/ MR4 3/8 1/ /8 11/ MR6 3/8 3/ /16 11/ MR8 3/8 1/ /16 11/ MR4 1/2 1/ /16 7/ MR6 1/2 3/ /16 7/ MR8 1/2 1/ /16 7/ NO: R threaded fittings conform to ISO (International Standards Organization) standards 7/1. 17

18 ube to Male Pipe B-BOY NU HX By H-WRNH P x P-PIP HR x Male Branch ee (MB) ube O.. P-NP Male Pipe Size x B By Opening Min. H 2MB2 1/8 1/ /16 5/16 2MB4 1/8 1/ /16 9/16 3MB2 3/16 1/ /2 7/16 4MB2 1/4 1/ /16 1/2 4MB4 1/4 1/ /16 9/16 5MB2 5/16 1/ /8 5/8 6MB4 3/8 1/ /16 5/8 6MB6 3/8 3/ /16 13/1 6 8MB6 1/2 3/ /8 13/1 6 8MB8 1/2 1/ /8 7/8 10MB8 5/8 1/ MB12 3/4 3/ /8 1-1/16 NU HX B-BOY P-PIP HR H-WRNH P x Male Run ee (MR) ube O.. P-NP Male Pipe Size x B By Opening Min. H 2MR2 1/8 1/ /16 5/16 2MR4 1/8 1/ /16 9/16 3MR2 3/16 1/ /2 7/16 4MR2 1/4 1/ /16 1/2 4MR4 1/4 1/ /16 9/16 5MR2 5/16 1/ /8 5/8 6MR4 3/8 1/ /16 5/8 6MR6 3/8 3/ /16 13/1 6 8MR6 1/2 3/ /8 13/1 6 8MR8 1/2 1/ /8 7/8 10MR8 5/8 1/ MR12 3/4 3/ /8 1-1/16 x By 18

19 ube to emale Pipe NU HX B-BOY BOY HX H P-PIP HR emale onnector () ube O.. P-NP emale Pipe Size B Opening H 11 1/16 1/ /16 7/ /16 1/ /16 9/ /8 1/ /16 9/ /8 1/ /16 3/4 32 3/16 1/ /2 9/ /4 1/ /16 9/ /4 1/ /16 3/4 46 1/4 3/ /16 7/8 48 1/4 1/ /16 1-1/ /16 1/ /8 9/ /16 1/ /8 3/4 62 3/8 1/ /16 5/8 64 3/8 1/ /16 3/4 66 3/8 3/ /16 7/8 68 3/8 1/ /16 1-1/ /8 3/ /16 1-5/ /2 1/ /8 13/ /2 3/ /8 7/8 88 1/2 1/ /8 1-1/ /2 3/ /8 1-5/ /8 3/ / /8 1/ / /4 1/ /8 1-1/ /4 3/ /8 1-5/ /8 3/ /4 1-5/ / /2 1-3/ /2 1-5/8 19

20 ube to emale Pipe B-BOY NU HX Hx-JM NU HX BOY HX H x P-PIP HR Bulkhead emale onnector (B) ube O.. P-NP emale Pipe Size x B Opening H Hx Maximum Panel hickness Panel Hole rill Size 2B2 1/8 1/ /16 9/16 1/ /64 4B2 1/4 1/ /16 5/8 5/ /64 4B4 1/4 1/ /16 3/4 5/ /64 6B4 3/8 1/ /16 3/4 3/ /64 8B6 1/2 3/ /8 15/16 15/ /64 8B8 1/2 1/ /8 1-1/16 15/ /64 20

21 ube to emale Pipe B-BOY B H-WRNH P P-PIP HR x emale Run ee (R) NU HX x By ube O.. P-NP emale Pipe Size x B By Opening H 2R2 1/8 1/ /16 9/16 4R2 1/4 1/ /16 9/16 4R4 1/4 1/ /16 3/4 6R4 3/8 1/ /16 3/4 8R6 1/2 3/ /8 7/8 8R8 1/2 1/ /8 1-1/16 12R12 3/4 3/ /8 1-3/8 21

22 ube to emale Pipe NU HX -BOY H-WRNH P By P-PIP HR emale lbow () ube O.. P-NP emale Pipe Size By Opening H 22 1/8 1/ /16 1/2 24 1/8 1/ /16 3/4 32 3/16 1/ /2 1/2 42 1/4 1/ /16 1/2 44 1/4 1/ /16 3/4 46 1/4 3/ /16 7/8 48 1/4 1/ / /16 1/ /8 9/ /16 1/ /8 3/4 62 3/8 1/ /16 5/8 64 3/8 1/ /16 3/4 66 3/8 3/ /16 7/8 68 3/8 1/ / /2 1/ /8 13/ /2 3/ /8 7/8 88 1/2 1/ / /8 3/ / /8 1/ / /4 1/ /8 1-1/ /4 3/ /8 1-3/ /8 3/ /4 1-3/ / /2 1-3/ /2 1-5/8 22

23 ube to emale Pipe/ube to ube Union B-BOY NU HX By H-WRNH P x P-PIP HR x emale Branch ee (B) ube O.. P-NP emale Pipe Size x B By Opening H 2B2 1/8 1/ /16 9/16 4B2 1/4 1/ /16 9/16 4B4 1/4 1/ /16 3/4 6B4 3/8 1/ /16 3/4 8B4 1/2 1/ /8 13/1 6 8B6 1/2 3/ /8 7/8 8B8 1/2 1/ /8 1 10B8 5/8 1/ B12 3/4 3/ /8 1-3/8 16B12 1 3/ /2 1-3/8 16B /2 1-5/8 NU HX B-BOY H-BOY HX Union (U) ube O.. B Opening H 1U 1/ /16 5/16 2U 1/ /16 7/16 3U 3/ /2 7/16 4U 1/ /16 1/2 5U 5/ /8 9/16 6U 3/ /16 5/8 8U 1/ /8 13/16 10U 5/ /16 12U 3/ /8 1-1/16 14U 7/ /4 1-3/16 16U /2 1-3/8 23

24 ube to ube Union NU HX B-BOY H-BOY HX H-JM NU HX x Bulkhead Union (BU) ube O.. x B Opening H Maximum Panel hickness Panel Hole rill Size 1BU 1/ /16 5/ /16 2BU 1/ /16 1/ /64 3BU 3/ /2 9/ /64 4BU 1/ /16 5/ /64 5BU 5/ /8 11/ /64 6BU 3/ /16 3/ /64 8BU 1/ /8 15/ /64 10BU 5/ / /64 12BU 3/ /8 1-3/ /64 16BU /2 1-5/ /64 NU HX B-BOY H-BOY HX NU HX x x Hx-JM NU HX x x x Bulkhead Reducing Union (BRU) ube O.. x ube O.. x B x x Opening x H Hx Maximum Panel hickness Panel Hole rill Size 4BRU2 1/4 1/ /16 7/16 5/8 55/ /64 6BRU4 3/8 1/ /16 9/16 3/4 3/ /64 8BRU4 1/2 1/ /8 9/16 15/16 15/ /64 8BRU6 1/2 3/ /8 11/16 15/16 15/ /64 24

25 ube to ube Union NU HX B-BOY H-BOY HX NU HX x x x x Reducing Union (RU) ube O.. x ube O.. B x x Opening x H 2RU1 1/8 1/ /16 5/16 7/16 3RU1 3/16 1/ /2 5/16 7/16 3RU2 3/16 1/ /2 7/16 7/16 4RU1 1/4 1/ /16 5/16 1/2 4RU2 1/4 1/ /16 7/16 1/2 4RU3 1/4 3/ /16 1/2 1/2 5RU2 5/16 1/ /8 7/16 9/16 5RU4 5/16 1/ /8 9/16 9/16 6RU1 3/8 1/ /16 5/16 5/8 6RU2 3/8 1/ /16 7/16 5/8 6RU4 3/8 1/ /16 9/16 5/8 6RU5 3/8 5/ /16 5/8 5/8 8RU2 1/2 1/ /8 7/16 13/16 8RU4 1/2 1/ /8 9/16 13/16 8RU6 1/2 3/ /8 11/16 13/16 10RU6 5/8 3/ /16 15/16 10RU8 5/8 1/ /8 15/16 12RU4 3/4 1/ /8 9/16 1-1/16 12RU6 3/4 3/ /8 11/16 1-1/16 12RU8 3/4 1/ /8 7/8 1-1/16 12RU10 3/4 5/ / /16 16RU8 1 1/ /2 7/8 1-3/8 16RU12 1 3/ /2 1-1/8 1-3/8 25

26 ube to ube Union NU HX H-WRNH P -BOY Union lbow (U) ube O.. Opening H 1U 1/ /8 5/16 3/8 2U 1/ /8 7/16 3/8 3U 3/ /2 1/2 1/2 4U 1/ /2 9/16 1/2 5U 5/ /16 5/8 9/16 6U 3/ /8 11/16 5/8 8U 1/ /16 7/8 13/16 10U 5/ / /16 12U 3/ /16 1-1/8 1-1/16 14U 7/ /8 1-1/4 1-3/8 16U /8 1-1/2 1-3/8 x H-WRNH P x NU HX Union ross (US) B-BOY ube O.. x B Opening H 2US 1/ /16 7/16 4US 1/ /16 7/16 5US 5/ /8 9/16 6US 3/ /16 9/16 8US 1/ /8 3/4 12US 3/ /8 1-1/16 26

27 ube to ube Union B-BOY NU HX H-WRNH P Union ee (U) x x ube O.. x B Opening H 1U 1/ /16 3/8 2U 1/ /16 3/8 3U 3/ /2 7/16 4U 1/ /16 1/2 5U 5/ /8 5/8 6U 3/ /16 5/8 8U 1/ /8 13/16 10U 5/ U 3/ /8 1-1/16 14U 7/ /4 1-3/8 16U /2 1-3/8 Heat xchanger ee ustom configuration, forged heat exchanger tees can be designed and manufactured by SSP to customers specific design criteria. dditionally, heat exchanger tees may be assembled by utilizing standard union tees (U) combined with reducers that have been bored through (RB fittings) to allow the process tube to be inserted into and through the jacketing tube. Union ee Process ube Jacketing ube Bored hrough Reducer ssembled Heat xchanger ee NO: Pressure Ratings of bored through tube fittings are reduced. or additional information on a specific fitting s rating, contact your local distributor. 27

28 ube to ube Union B-BOY NU HX y By x x H-WRNH P x x x x NU HX B-BOY By NU HX B-BOY By NU HX B-BOY By x x x x x x x H-WRNH P x x x H-WRNH P x x By y H-WRNH P x1 x1 By1 y1 x y x1 x1 x y x y B Reducing Union ee - onfiguration (RU) ube O.. x ube O.. x y B By x x x H 6RU64 3/8 1/ /16 9/16 5/8 8RU84 1/2 1/ /8 9/16 13/1 6 8RU86 1/2 3/ /8 11/16 13/1 6 10RU106 5/8 3/ / RU126 3/4 3/ /8 11/16 1-1/16 12RU128 3/4 1/ /8 7/8 1-1/16 16RU / /2 1-1/16 1-3/8 16RU / /2 7/8 1-3/8 16RU / /2 1-1/8 1-3/8 Reducing Union ee - onfiguration B (RU) ube O.. x ube O.. x y B By x x x H 6RU46 3/8 1/ /16 9/16 5/8 Reducing Union ee - onfiguration (RU) ube O.. x ube O.. x y B By x x x H 8RU66 1/2 3/ /8 11/16 13/1 6 10RU66 5/8 3/ / RU66 3/4 3/ /8 11/16 1-1/16 Reducing Union ee - onfiguration (RU) ube O.. x ube O.. x1 ube O.. x y y1 B By x x1 x x1 x x1 H 10RU86 5/8 1/2 3/ /8 11/ RU86 3/4 1/2 3/ /16 7/8 11/16 1-1/16 16RU /4 3/ /8 1-1/8 11/16 1-3/8 28

29 ielectric ittings L ielectric Identification Ring ielectric dapter () ube nd ube nd L Hex Hex 86 3/8 1/ /16 7/8 he SSP Instrumentation ielectric dapter is supplied with pre-swaged 3/8 uolok nut and ferrules. he dielectric connection has a captive 1/2 uolok nut. ielectric stop collar and assembly instructions are also supplied with the adapter. By using 3/8 and 1/2 tube-ended SSP Instrumentation tube fittings with the adapter, a wide range of dielectric fitting configurations can be built. L ielectric Union (U) L (inches) 4U U U M ielectric fittings are designed to isolate monitoring and control instruments and equipment from electrical current and coltages. Manufactured in 316 stainless steel with thermoplastic insulators, SSP instrumentation s dielectric fittings provide high dielectric strength in applications up to 5,000 psig. ypical applications for dielectric fittings are on impulse lines and in natural gas pipeline monitoring stations. or additional factory assembled configurations, contact your local distributor. Materials and echnical ata Body: 316 Stainless Steel Insulator:Polyamide-imide Pressure Rating: 5,000 psig emperature Rating: rom -40 to +200 lectrical Resistance: 1.0 x 107 Ohm at 70 (20 ) at 10 50% relative humidity; voltage breakdown resistance of 3,000 V. 29

30 ube to Welded System NU HX B-BOY S x H-BOY HX ube Socket Weld Union (SWU) ube O.. B Opening x H S 2SWU2 1/ /16 7/ SWU4 1/ /16 1/ SWU6 3/ /16 5/ SWU8 1/ /8 13/ SWU12 3/ /8 1-1/ SWU /2 1-3/ NU HX -BOY H-WRNH P x By W ube Socket Weld lbow (SW) ube O.. By Opening x H W 4SW4 1/ /16 1/ SW6 3/ /16 5/ SW8 1/ /8 13/ tube fittings with weld ends allow weld system connection to tubing with the advantage of a leak tight seal that can be disassembled in an otherwise permanently welded system. Weld ends conform to NSI B31.1 and B31.3 piping codes. Welding precautions: Prior to welding, remove the nut and ferrules. o protect the fitting body threads and seat, cover with a plug or another nut. Position a suitable heat sink to dissipate the heat. Insert the tube until bottomed out in the socket, then back out approximately 1/16 before welding. Note: he welding of a bottomed tube may lead to stess cracking of the weld. o hold the fitting in proper alignment, tack weld the fitting in four places (90 apart) and then complete the weld. fter welding, remove the protective plug or nut and replace with the nut and ferrules for tube installation following the instructions from page 6. 30

31 ube to Welded System NU HX B-BOY 37 1/2 S H-BOY HX Male Pipe Weld onnector (MPW) ube O.. Opening H S Male Pipe Weld Size B 2MPW2 1/8 1/ /16 7/ MPW2 3/16 1/ /2 7/ MPW2 1/4 1/ /16 1/ MPW4 1/4 1/ /16 9/ MPW2 5/16 1/ /8 9/ MPW4 5/16 1/ /8 9/ MPW4 3/8 1/ /16 5/ MPW6 3/8 3/ /16 11/ MPW8 3/8 1/ /16 7/ MPW6 1/2 3/ /8 13/ MPW8 1/2 1/ /8 7/ MPW12 1/2 3/ /8 1-1/ MPW8 5/8 1/ / MPW12 3/4 3/ /8 1-1/ MPW /2 1-3/ NU HX -BOY H-WRNH P 37 1/2 By S Male Pipe Weld lbow (MPW) ube O.. Male Pipe Weld Size By Opening H S 4MPW2 1/4 1/ /16 1/ MPW4 1/4 1/ /16 1/ MPW4 3/8 1/ /16 5/ MPW8 1/2 1/ /8 7/ MPW12 3/4 3/ /8 1-1/

32 ube Stub onnectors/dapters NU HX H-JM NU B-BOY H-BOY HX x Bulkhead Reducer/dapter (BR) ube O.. x B Opening H Maximum Panel hickness Panel Hole rill Size 2BR2 1/ /1 6 1/ /64 4BR4 1/ /1 6 5/ /64 6BR6 3/ /1 6 3/ /64 8BR8 1/ /8 15/ /64 Panel Bulkhead Reducer/dapter he Bulkhead Reducer / dapter tube fitting provides the greatest connection flexibility in panel installations. he bulkhead reducer / adapter can be used with any proper size tube fitting configuration to meet the installers special requirements. emale lbow Bulkhead emale lbow 32

33 ube Stub onnectors/dapters NU HX UB I. O.. B-BOY x H-BOY HX Reducer/dapter* (R) ube O.. Opening H x O.. B 1R2 1/16 1/ /16 5/16 1R4 1/16 1/ /16 5/16 2R1 1/8 1/ /16 7/16 2R2 1/8 1/ /16 7/16 2R3 1/8 3/ /16 7/16 2R4 1/8 1/ /16 7/16 2R6 1/8 3/ /16 7/16 2R8 1/8 1/ /16 9/16 3R2 3/16 1/ /2 7/16 3R4 3/16 1/ /2 7/16 4R2 1/4 1/ /16 1/2 4R3 1/4 3/ /16 1/2 4R4 1/4 1/ /16 1/2 4R5 1/4 5/ /16 1/2 4R6 1/4 3/ /16 1/2 4R8 1/4 1/ /16 9/16 4R10 1/4 5/ /16 11/16 4R12 1/4 3/ /16 13/16 5R6 5/16 3/ /8 9/16 5R8 5/16 1/ /8 9/16 6R4 3/8 1/ /16 5/8 6R6 3/8 3/ /16 5/8 6R8 3/8 1/ /16 5/8 6R10 3/8 5/ /16 11/16 6R12 3/8 3/ /16 13/16 8R4 1/2 1/ /8 13/16 8R6 1/2 3/ /8 13/16 8R8 1/2 1/ /8 13/16 8R10 1/2 5/ /8 13/16 8R12 1/2 3/ /8 13/16 8R16 1/ /8 1-1/16 10R12 5/8 3/ /16 10R14 5/8 7/ /16 10R16 5/ /16 12R8 3/4 1/ /8 1-1/16 12R16 3/ /8 1-1/16 *NO: or Heat xchanger ee applications (see page 27), certain Reducer/ dapter fittings can be bored through to accommodate a process tube s insertion. onsult with the local distributor for further information on bored through Reducer/dapter (RB) fittings. 33