BeSpoke Owner s Manual

Transcription

1 Requirements BeSpoke Premium Audio PART NO. PT BeSpoke Owner s Manual Requirements for using BeSpoke with this unit: Apple iphone 4 or 4S. Connection to the Internet via 3G, GSM/EDGE, CDMA or Wi-Fi network Getting Started Download the latest version of the free BeSpoke app by going to the Apple itunes App Store and search for "BeSpoke". Once installed, launch the app and create your account, then connect your iphone with the cables provided. (see detailed information on the next page.) The BeSpoke app BeSpoke uses an app on your iphone that is displayed on the screen in your car. BeSpoke lets you do the following and more: Listen to Internet Radio and share your favorite stations with friends Check friends Facebook updates Create routes to destinations and friends Display Twitter/Facebook friends on maps Use voice to control the app Search for destinations and share the results with friends To use this unit, first download the BeSpoke application to your iphone and register for a Zypr account, and then connect the iphone to this unit. (See detailed information on the next page.) 1

2 How to Connect your iphone Connect the iphone as indicated in the figure below using the cable provided. 1. Remove any headphones connect to the iphone 2. Push the dock connector into the dock connector port until you hear a click to connect firmly. If it does not go in smoothly, it may be upside down so do not force it in as this may result in damage. 3. Connect the USB cable into the vehicle's USB port 4. Connect the cable's audio jack into the jack port 5. Once connected, the iphone will automatically turn on, and will indicate that an accessory has been connected to the iphone Dock connector 2 ipod (iphone) with Dock connector port USB port Jack port To the vehicle's connector *1 *1 Connection location differs depending on the vehicle. Vehicle Connection location type tc Connect to the connector near the shift knob. xb Connect to the connector near the parking brake. xd Connect to the connector near the cup holder. iq Connect to the connector near the shift knob. FR-S Connect to the connector near the shift knob. IMPORTANT When the ignition switch is set to ACC or ON, the iphone s battery is charged while the iphone is connected. You cannot use the iphone s remote control while the iphone is connected. You may hear noise if you disconnect during iphone playback. If there is a problem with the screen display, disconnect and reconnect the cable. The iphone should not be locked. To resolve most problems when using your iphone with this unit, disconnect your iphone from the vehicle iphone connection and reset it. For instructions on how to reset your iphone, refer to the User Guide of your iphone. Connect the Dock connector directly to the iphone with Dock connector port. Do not connect it via the iphone Dock or other connection. When the iphone is connected to this unit, sound will also be heard from the headphone of the iphone. Disconnect the headphone from the iphone before use. Content and usability may change over time. Please check our website at

3 How to change the alert style from Alerts to Banners Change the alert style from Alerts to Banners on the iphone settings screen. 3 Touch [Banners]. How to connect Bluetooth 1 Touch [ ] then [Bluetooth] to display the setting menu. 1 Touch [Notifications]. 2 Touch [Connect Phone] to pair your Bluetooth hands-free phone. 2 Touch the item you want to configure the alert style for. Repeat steps 2 and 3 to convert the alert style of all the items from Alerts to Banners. 3 Touch [Add New] to connect your Bluetooth hands-free phone. 3

4 iphone setting 1 Touch [Location Service]. 3 Touch [Services]. 4 Touch [Location Reporting]. 2 Switch [Location Service] to ON. 3 Switch [BeSpoke] to ON. BeSpoke app setting 1 Launch BeSpoke app. 2 Touch [ ] on your iphone. 5 Select Location Reporting. For more details about the Location Reporting setting, refer to the About location setting section on page 28. Bluetooth hands-free phone connection is complete. 4

5 Quick Start Scion s Internet Radio Other Internet Radio Stations Current Location Cell Phone Reception: OFF Cell Phone Reception: ON Social Network Service POI Search Routing each POI. POI search results can be shared using Twitter's direct mail service. Using Voice Routing Touch [ ] on the right side of the screen to pull up a map and direction list. Touch a balloon or direction from the list to start audio guidance. You can find routes for destinations easily using the list of recents. Initiates Voice Recognition Zoom In / Out Return to Current Location North / Heading Up Zoom In Level Using BeSpoke's Voice Recognition Touch [ ] to activate function control using your voice. Start talking after the beep stops. Listening to Internet Radio Touch [ ] to listen to and enjoy Internet Radio. Touch [List] on the displayed screen to pull up a genre list from which you can select a favorite station. The Internet Radio station can be shared with friends using the direct mail service on Twitter. Touch [ ] to pull up a station list of Scion Audio Visual stations from which you can select a favorite station to play. Checking Twitter/ Facebook Touch [ ] to access the Timeline on Twitter and the News Feed on Facebook. You can also use this function to check the Tweets and Feeds of registered friends in the list. The location of friends who are disclosing their location will be displayed on the map. Searching for Points of Interest Touch [ ] to pull up a genre list that you can use to search for POIs. You can display POI search results on the MAP, and create routes to If another Bluetooth audio device in addition to iphone is connected, Voice Recognition may not work properly. If so, please set Bluetooth audio to the iphone only. * The following voice control functions are available: Playing Internet Radio. Getting Status Updates (Twitter/ Facebook) Sending direct messages Searching for friends Searching for POIs 5

6 Searching for routes * A Bluetooth connection is needed in order to use voice control. * Touch [ ] on your iphone and then use [Help] to check the operating procedures for each icon. (When iphone is disconnected.) * For more details, please visit our website at * Operational procedures may differ depending on the version of the application being used. 6

7 How to Use BeSpoke (Touch Operation): The following instructions assume that the iphone is connected to the car and the BeSpoke app has been launched. How to listen to Internet Radio Play and stop 1 Touch [ ]. Choose by Genre 1 Touch [List] to display the Internet Radio Service Provider Search screen. 2 Touch [Tuner2 - Genre] to switch to the Genre Search screen. 3 Touch the listing for your favorite genre. 2 Touch [ ] to display the Internet Radio screen. The list of the Internet radio stations within the selected genre will appear. The station you select will begin playing automatically. To add the current Internet Radio station to your Favorites, touch [+Fav]. 7

8 To remove the current Internet Radio station from your Favorites, touch [-Fav]. How to show friends on the map 1 Touch [ ]. Touch [ ]to return to the regular map screen. Choose by Internet Radio service provider 1 Touch [List] to display the Internet Radio Service Provider Search screen. 2 Choose one of the following operations to suit your preference. To select from the Internet Radio station recommended by Scion, touch [SCION AV RADIO]. To select from the Internet Radio Stations you listened to recently, touch [Recents]. 2 Touch [ ] to display the MyFriends & Me list. 3 Select the friend whose current location you want to know. 8 To select from your favorite Internet Radio Stations, touch [Favorites].

9 How to Search for a Local Business POI 1 Touch [ ]. 2 Touch [ ] to display the POI list screen. 4 Touch [Map]. 3 Select the POI you are searching for from the list. Touch [favorite] to select from the list of your favorite POIs. 4 You can perform the following operations on the Detail screen for the selected POI: A balloon appears on the map, indicating the current location of your friend. If you cannot find the desired POI, or if you want to narrow the search list, do one of the following: To select the desired POI by category, touch [Category] to display the Category screen. Touch [Map] to display a balloon on the map that indicates the location of your POI. Touch [Route] to display the route to the target POI on the map. 9

10 Touch [+Fav] to add the POI to the Favorite list. Touch [-Fav] to remove the POI from the Favorite list. Touch [MSG] to send the POI information along with your message to your registered friends. 3 Select your Twitter follower from the MyFriend & Me list. 6 Select a message you want to send. How to send a direct message from the Twitter follower list 1 Display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8. 2 Touch either [ ] or [ ] to display Twitter followers. 4 Touch [MSG]. 7 Confirm the message to send, and then touch [Send] Touch [Messages] to display the message sample list. The direct message will be sent.

11 How to send a direct message 1 Display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8. 2 In the MyFriends & Me list, select your Twitter ID. 4 Select a Follow item you want to reply to. 7 Select a message you want to send. 5 Touch [Reply]. 8 Confirm the message to send, and then touch [Send]. 3 Touch [Direct Message] to switch to the Follow screen. 6 Touch [Messages] to display the message sample list. The direct message will be sent. 11

12 How to set a route from a balloon 1 Touch Balloon. Touch [GO!] to set it as a destination. To cancel, touch [Cancel]. It will not provide automatic turnby-turn guidance. 3 Touch [Route]. 2 Touch [Route]. How to set a route to a Twitter follower 1 Display Twitter followers. Refer to the "How to send a direct message from the Twitter follower list" section on page Select your Twitter follower from the MyFriend & Me list. You cannot select followers who are not sharing their locations. 4 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on this page. 3 A route overview will appear. 12

13 How to set a route to a location on the map 1 Touch the map and drag it to the area you want to set a route to. How to display a recent route 1 Touch [ ]. 2 Touch [ ] to display the maneuver screen for the currently-specified route. 4 Select a route. 2 Touch and hold the cross mark and the can set the destination route. 3 Touch [Recent] to display the list for the routes that you set recently. 3 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on page 12. The selected route will be displayed. 5 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on page 12. It will not provide automatic turnby-turn guidance. 13

14 How to view status update on Facebook 1 To view status update on Facebook, display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8. 2 Select your Facebook avatar from the MyFriends & Me list. How to view Timeline on Twitter 1 To view Timeline on Twitter, display the MyFriends & Me list. Refer to the How to show friends on the map section on page 8. 2 Select your Twitter avatar from the MyFriends & Me list. The Timeline screen appears. The News Feed screen appears. 14

15 How to Use BeSpoke (Voice Commands) When BeSpoke automatically detects the end of the spoken voice command, the following screen appears. 1 Touch [ ] on the map screen or Internet Radio screen. After a beep, the talk command screen appears. BeSpoke is listening for a voice command. For voice commands, refer to the "Voice commands list" section on page 18. Search by voice recognition 1 Say a search voice command on the talk command screen. If the search voice command is correctly recognized, the spoken command appears. The search result appears on the map screen. 15

16 Playing Internet Radio Say a play Internet radio voice command. When the Internet Radio is playing, the screen will display a genre, station list or specific station according to the command. If the voice command is not clearly recognized, a list of candidates close to the spoken command appears, and voice commands are activated. A list of stations appears and voice commands are activated. From the displayed list, select and say the command number. You can also touch [ ] and say the number to activate the voice commands. How to send a message 1 Say a send message voice command on the talk command screen. For the voice command screen, refer to the "How to Use BeSpoke (Voice Commands)" section on page 15. The spoken command appears. When sending a message or searching a POI, BeSpoke waits for you to say the message or the name of POI. 2 Touch [ ]. After a beep, the talk command screen appears. 16 From the displayed list, select and say the command number. You can also touch [ ] and say the number to activate the voice commands.

17 3 When sending a message or searching a POI, say one of the following: When sending a message, say the message you want to send, e.g. Hello. When searching a POI, say the name of the POI, e.g. BeSpoke Cafe. When BeSpoke automatically detects the end of the spoken voice command, the recognized message appears. 4 Touch [ ]. After a beep, the talk command screen appears. 5 Check the recognized message and say one of the following: If the recognized message is correct, say "Yes". If the recognized message is incorrect, say "No". BeSpoke returns to step 2. When BeSpoke automatically detects the end of the spoken voice command, the recognized message appears. First use a 'send message to' voice command, then when BeSpoke confirms the command and indicates "Please send message text", dictate the message you want to send. If the voice command is used on the Internet Radio screen, BeSpoke returns to the Internet Radio screen. 17

18 Voice Commands List Internet Radio Example voice command Show <genre> station Play <station name> Play Internet Radio Show recent station Stop the music Stop Play a random station Friend Example voice command Find <friend name> on the map I want to see <friend name> POI Example voice command Find <category name> nearby Find local business Find business in <City> <State> Find <category name> in <City> <State> Explanation Obtains the station list of the specified genre. Plays the specified Internet Radio station. Obtains a genre list of the Internet Radio. Obtains the recently played list of stations. Stops playing the station. Stops the music. Selects a radio station at random. Explanation Searches a friend on the map. Explanation Specifies a POI category on the currently displayed map screen to search the surrounding area. Searches POIs in the surrounding area. Searches POIs in the specified city. Specifies a city and searches the POI category. 18

19 Route Example voice command Route to <list number> Route to <friend name> Cancel routing Reroute to last destination Message Example voice command Send <list number> to <friend name> Send this station to <friend name> Show my messages Reply to this message Next message Previous message Post a status update on Twitter Post a status update on Facebook Send a message to <friend name> Send a message to <friend name> on Twitter Explanation Finds a route to the POIs displayed in the search results after a POI search. (Specifies a POI using a list number) Finds a route to a friend recognized by the application. Deletes the found route. Reroutes to the most recent destination. Explanation Specifies a POI using a list number and sends information to a friend after a POI search. Sends the information on the currently played Internet Radio station to a friend. This command is effective only when there is a new message. Replies to a message confirmed by the Show my messages command. Shows the next message. Shows the previous message. Posts on Twitter. Posts on your Facebook feed. Sends a direct message to <friend s name>. Sends a direct message to <friend s name> on Twitter. 19

20 Error Lists Server errors Message Cause Action (Reference) Sorry, taking a coffee break. Please try again later. Attempted to retrieve information or execute a command, but was not able to complete it. Wait momentarily and then retry the operation. Voice recognition error Message Cause Action (Reference) Sorry, I didn t catch that. Please repeat it. Unable to obtain voice recognition results from the Zypr server. Repeat the voice command in a loud, clear voice. Unsupported errors Message Cause Action (Reference) Sorry, that command isn t available. Please see Examples. BeSpoke does not support that voice command. Refer to the Voice Command Guide, double check the corresponding command and then repeat the voice command. 20

21 Message Cause Action (Reference) Sorry, I don t recognize that item. Please try again. Sorry, I didn t catch that. Please repeat it. Unsuccessful in obtaining information for pointing out the POI from the voice recognition results. The POI designated by the voice recognition results for which a search has already been carried out does not exist amongst the POIs in the application. Radio playback is not selected immediately after logging out, so the radio station could not be designated. Unsuccessful in obtaining the information for designating the radio station URL from the voice recognition results. Unsuccessful in obtaining the information for designating the radio genre from the voice recognition results. Friends and POIs for which routes are to be created and for which names and numbers were indicated were not recognized. (The names and numbers indicated are not consistent with the names and numbers maintained within the application.) Unsuccessful in obtaining information for specifying message details from the voice recognition results. Give the voice command after verifying the POI to be indicated. Give the voice command after verifying the number to be indicated. Give the voice command after verifying the POI to be indicated. Give the voice command after verifying the number to be indicated. Give the voice command after playing the radio. Give the voice command after doublechecking the radio station you want to designate. Give the voice command after doublechecking the genre you want to designate. Give the voice command after verifying the name and number of the item to be indicated. Give the voice command again. 21

22 Message Cause Action (Reference) Sorry, that location can t be found. Please try again. Because there is no location information regarding the friends or POIs for which routes are to be created and names and numbers indicated, this information cannot be verified. A friend without any location information was specified. Give the voice command after verifying that the designated item has location information (i.e., that the item is on the map). Give the voice command after verifying that the friend to be specified has location information (i.e, that the friend is on the map). Sorry, I don t see that friend on your list. Please try again. Sorry, this feature is for Twitter friends only. Please try again. Information for specifying friends could not be obtained from the voice recognition results. The friend indicated in the voice recognition results is not on the Friends list that was acquired within the application. Information for specifying friends whom you will be contacting could not be obtained from the voice recognition results. Service providers other than Twitter were specified in the voice recognition results. Facebook is the service provider indicated by voice recognition results. Verify the link to the service provider that your designated friend uses (i.e., that service authorization has been completed) on the Config screen. Give the voice command after verifying your friend who is to be specified. Please check your setup and verify your friend. Verify that Twitter is linked to (i.e, that service authorization has been completed) on the Config screen. Give the voice command after verifying that your designated friend is a Twitter user. 22

23 Message Cause Action (Reference) Sorry, that Social Network Service isn t supported. Please check your configuration. Information critical for sending the message could not be obtained from the voice recognition results. Verify the link to the service provider that your designated friend uses (i.e., that service authorization has been completed) on the Config screen. Give the voice command again. Verify that Facebook and Twitter are linked to (i.e., that service authorization has been completed) on the Config screen. Give the voice command after verifying that the designated service provider is Twitter or Facebook. Verify that Twitter are linked to (i.e., that service authorization has been completed) on the Config screen. Give the voice command after verifying that the designated service provider is Twitter. Sorry, that Internet Radio station isn t supported. Sorry, your {Twitter/Facebook} account isn t registered. Please check your configuration. Unsuccessful in obtaining the information for designating the radio station servicer from the voice recognition results. Not linked to {Twitter/FaceBook}. Was not connected to the service provider designated by voice recognition results. Give the voice command after doublechecking the radio station you want to designate Verify that {Twitter/FaceBook} are linked to (i.e., that service authorization has been completed) on the Config screen. Give the voice command again. Verify that the designated service provider is linked to (i.e., that service authorization has been completed) on the Config screen. Give the voice command again. 23

24 Message Cause Action (Reference) Sorry, your last destination isn t set. Please set your destination. With no route established, there was no destination data, so rerouting could not be carried out. Give the voice command after setting up the route. Sorry, your destination isn t set. Sorry, there are no New Messages. Sorry, there are no recent stations. With no route established, there was no route data to begin with, so no route deletion can be carried out. Show Message is stated in the absence of a new message. No broadcast stations have been listened to recently, so no list can be displayed. Give the voice command after setting up the route. Give the voice command after having received the new message. Give the voice command after playing the radio. Network error Message Cause Action (Reference) Sorry, your device is no longer connected to the Internet. Unit has been moved out of 3G/Wi-Fi communications range. 3G/Wi-Fi communications no longer possible. Change locations or wait for a short amount of time until 3G/Wi-Fi communications are reestablished. 24

25 Other errors Message Cause Action (Reference) Sorry, no account found. Please check your configuration. The service provider is not linked to on Config. Information regarding the service provider that is linked to cannot being obtained. If there is an error message right after logging in, wait for a moment and then carry out the action again. When there is an error message sometime other than right after login, verify that the service provider is linked to (i.e., that service authorization has been completed) on the Config screen. Sorry, that attachment can t be opened. Sorry, that station can t be found. Please try again later. Sorry, your list is full. Please delete an item. The number of Friends cases obtained from Zypr is zero. Something other than the radio or POI was connected. The URL of the broadcast station was obtained from the Zypr server but it was not correct. The number of registered Favorites has reached the maximum limit. Friends: 30 POI: 9 Radio: 16 Verify that the SNS service provider is linked to (i.e., that service authorization has been completed) on the Config screen. Have the message resent after connecting the radio or POI. Wait for a moment and then carry out the action again. Delete the item from Favorites and, after creating space amongst the registered items, re-register the item in question. 25

26 Message Cause Action (Reference) Sorry, Zypr server is busy. Please try again later. There is no data to be registered. The data obtained from Zypr did not contain anything. Wait momentarily and then retry the operation. Wait momentarily and then retry the operation. Sorry, that item is already a Favorite. Sorry, your last destination isn t set. Please set your destination. Sorry, I didn t recognize the account. Please enter it again. Sorry, I don t see your Address. Sorry, I don t see your Password. Sorry, I don t see your First Name. The data that you are trying to register has already been registered. With no route established, there was no destination data, so rerouting could not be carried out. The address (account) and password combination that was input is not correct. The Login button was pressed without any information entered for the input item Account ( address). The Login button was pressed without any information entered for the input item Password. The Sign Up button was pressed without any information entered for the input item First Name. Wait momentarily and then retry the operation. After setting up the route, try rerouting again. Double-check the account and password and then re-enter them. Input the account information and then press the button again. Please enter your address. Input the password information and then press the button again. Input item First Name information and then press the button again. 26

27 Message Cause Action (Reference) Sorry, I don t see your Last Name. The Sign Up button was pressed without any information entered for the input item Last Name. Input item Last Name information and then press the button again. Sorry, I don t see your Address. Sorry, I don t see your Password. Sorry, I don t see your Confirmed Password. Sorry, I need your Password to be more than 8 but less than 40 characters. Sorry, I don t think your Password and Confirmed Password match. The Sign Up button was pressed without any information entered for the input item Account ( address). The Sign Up button was pressed without any information entered for the input item Password. The Sign Up button was pressed without any information entered for the input item Confirm. The Sign Up button was pressed with less then eight characters being entered for the Password input item. The Sign Up button was pressed with more than 40 characters being entered for the Password input item. The Sign Up button was pressed with nonidentical Password and Confirm (Password) input items. Input the account information and then press the button again. Please enter your address. Input the password information and then press the button again. Input item Confirm (Password) information and then press the button again. Input a password containing at least eight but not more than 40 characters, and then press the button again. Input a password containing at least eight but not more than 40 characters, and then press the button again. After verifying that Password and Confirm (Password) are identical, press the button again. 27

28 Message Cause Action (Reference) Sorry, BeSpoke doesn t support your device. Please check Scion.com for compatibility. An iphone 3G or some other incompatible device has been connected to the this unit. After verifying that the device in question is a compatible model that is registered on scion.com, try reconnecting the device. Sorry, there are no preset POIs. Sorry, there are no results in the viewable area. Sorry, your Friends List is empty. Please check your configuration. Sorry, I couldn't find that genre. Sorry, I couldn t find those stations. The POI search history returns zero hits. The number of POI cases obtained from Zypr is zero. The number of Friends cases obtained from Zypr is zero. There aren't any stations in that genre. The number of Radio Station cases obtained from Zypr is zero. After performing a search for Business using your iphone, carry out the operations again using the on-board screen. Select another category, or try again after moving to another part of the map. Verify that the SNS service provider is linked to (i.e., that service authorization has been completed) on the Config screen. Select another genre, or wait a while and try again. Select another genre, or try again after waiting momentarily. 28

29 About location setting Sharing of your location is completely manageable by you. Make sure you follow these steps to take a full control of your location information. 1. iphone setting is ON to allow access to your GPS location. NOTICE When GPS is set to ON in the Location Services settings on your iphone, the BeSpoke default setting is [Detect your location]. When GPS is set to OFF in the Location Services settings on your iphone, the BeSpoke default setting is [Hide your location]. 2. BeSpoke App setting is selected as Detect your location to update your GPS location. You can also set your location manually ( Set your location ) by setting the center of the current map as your location or hiding your location completely ( Hide your location ) so that your location cannot be found by your friends in the Friends List. 29

30 3. Select who you would like to share your location with. (Up to 30 accounts, e.g. If your friend has both Twitter and Facebook accounts and you add these accounts, then it counts as two ) Select account Added friends NOTICE Your location setting cannot be altered on an individual account basis. Once you select Detect your location, then you are revealing your location to every friend added by you here as well as services accessed through BeSpoke. 4. You will see your friends on the map. Make sure the Social bar is ON in order to see your friends. Social bar is ON Social bar is OFF NOTICE There is no way of knowing on the BeSpoke app whether your friend s location is the actual location of the Smartphone (GPS location) or a manually registered location Enjoy!

31 Compatible Device Models and Versions Compatible devices are iphone 4, iphone 4S and ipod Touch (4G) with an ios of 5.0 or later. (As of February 23, 2012) Available Carriers Any carrier may be used with BeSpoke and it is also enabled for Wi-Fi. Disclaimer BeSpoke app requires ios 5.0 or later on iphone4, iphone 4S with data plan or ipod touch (4th gen or newer; WiFi access required) Features of the BeSpoke app may be changed without notice. Zypr account registration required to access content and services. Must be at least 18 years old or have permission of a parent or legal guardian. Service available in the United States only. PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation. [1] Performance of Bluetooth compatible phones will vary based on phone software version, coverage, and your wireless carrier. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. [2] iphone is a registered trademark of Apple, Inc. All rights reserved. [3] ipod is a registered trademark of Apple, Inc. All rights reserved. [4] App Store SM is a service mark of Apple, Inc. All rights reserved. [5] ZYPR is a trademark of Pioneer Corporation. [6] Twitter is a registered trademark of Twitter Inc. [7] Tuner2 is a trademark of Media Tuners LLC. [8] Facebook is a registered trademark of Facebook, Inc Scion, a marque of Toyota Motor Sales, U.S.A., Inc. All rights reserved. Scion and the Scion logo are trademarks of Toyota Motor Corporation. 31

32 <KOKZX> <12E00000> <CVH-3918ZT> <CRB4096-B> UC 32