Mechanical-Electric Lift (Ball Screw, Electric Type)

Transcription

1 Table Type Mechanical-Electric Lift (Ball Screw, Electric Type) ML Ultra-low & Mini Type : 220/330 lbs (2) (1) Compact, space-saving, and thin type which can be placed anywhere. Major features of the ML Series ML V-100 During lowering Uses a brushless motor Vector control Dry ball screw cylinder Built-in unit Power supply: 115 V single-phase Maximum starting frequency 10 times per minute Bellows type full cover (with 'J' at the end) Foot switch with LED Cord: 78.7in. Has a maximum/minimum limit switch Power cord: 118.1in. Maximum usage frequency: 30 times per hour Note) When loading from the side of the table, please do so in the following manner: from side (1) load less than or equal to 1/2 of the loading (see table), and from side (2) load less than or equal to 1/4 of the loading (see table) Note) Do not carry out welding operations on top of the table. Bellows ML V ML V ML V ML V ML VJ ML VJ 330 lbs 330 lbs to to to to 16.9 Duration of lifting and lowering (in seconds) Motor output (W) lbs 93 lbs 68 lbs 77 lbs 104 lbs 86 lbs * A bellows cannot be installed in a standard type.

2 Mini Type : 220 to 2205 lbs (1) (2) During lowering Bellows MLM V-12 MLM V-12 MLM V-12 MLM V-12 MLM V-12 MLM WV-12 MLM WV-12 MLM WV-12 MLM VJ-12 MLM VJ-12 MLM WVJ lbs 551 lbs Duration of lifting and lowering (in seconds) to to Motor output (W) to to to to lbs 75 lbs 88 lbs 99 lbs 110 lbs 93 lbs 97 lbs 110 lbs 108 lbs 132 lbs 130 lbs * A bellows cannot be installed in a standard type.

3 Table Type Mechanical-Electric Lift (Ball Screw, Electric Type) MLP Mini Type Using IPM Motor : 551 lbs (2) MLP (1) Long service life and high output by adopting the IPM motor Major features of the MLP Series Uses IPM motor Vector control Dry ball screw cylinder Built-in unit Power supply: 115 V single-phase Maximum starting frequency 10 times per minute Bellows type full cover (with 'J' at the end) Foot switch with LED Cord: 78.7in. Has a maximum/minimum limit switch Power cord: 118.1in. No oil leaks due to ball screw cylinder Cam-type cylinder head enhances rigidity Through strengthening the axis, durability is enhanced Does not fall by itself Note) When loading from the side of the table, please do so in the following manner: from side (1) load less than or equal to 1/2 of the loading (see table), and from side (2) load less than or equal to 1/4 of the loading (see table) Note) Few subductions will occur. Note) The unit cannot be used outdoors, or in places that are dusty, with high temperature and humidity, or in temperatures (0 C or below). MLP MLP MLP J MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V lbs to to to to to to to to to to to to to 34.8 Lifting duration (in seconds) Unloaded to loaded Approx. 20 Approx. 14 Approx. 18 Approx. 14 Approx. 18 Approx. 14 Approx. 15 Approx. 14 Approx. 15 Approx. 25 Approx. 32 Approx. 25 Approx. 32 Lowering duration (in seconds) Unloaded to loaded Approx. 20 Approx. 14 Approx. 18 Approx. 14 Approx. 18 Approx. 14 Approx. 15 Approx. 14 Approx. 15 Approx. 25 Approx. 32 Approx. 25 Approx. 32 Usage frequency Motor output (W) 551 lbs to 22.4 Approx. 20 Approx times / hour 99 lbs 110 lbs 70 w Bellows 551 lbs 15 times / hour 132 lbs 551 lbs 254 lbs 232 lbs 276 lbs 331 lbs 1102 lbs 15 times / hour 353 lbs 400 w 353 lbs 375 lbs 331 lbs 397 lbs 342 lbs 408 lbs * A bellows cannot be installed in a standard type.

4 MLP : 220/330 lb Low & Mini Type Using IPM Motor Table Type Mechanical Lift (Ball Screw, Electric Type) (2) (1) Compact, space-saving, and thin type which can be placed anywhere. Major features of the MLP Series Uses IPM motor 3.4in. low platform (no external units attached) Vector control Dry cylinder Built-in unit 110 V power supply Maximum starting frequency 10 times per minute Bellows type full cover (with 'J' at the end) Foot switch with LED Cord: 78.7in. Has a maximum/minimum limit switch Power cord: 118.1in. Quiet operation through the use of planetary gears in the decelerator (MLP-150-** is a helical gear) No oil leaks due to ball screw cylinder Cam-type cylinder head enhances rigidity Through strengthening the axis, durability is enhanced Does not fall by itself With built-in control board BOX (excluding MLP-150-**) MLP Note) When loading from the side of the table, please do so in the following manner: from side (1) load less than or equal to 1/2 of the loading (see table), and from side (2) load less than or equal to 1/4 of the loading (see table) Note) Little deflection will occur. Note) The unit cannot be used outdoors, or in places that are dusty, with high temperature and humidity, or in temperatures (0 C or below). MLP *The control box is located outside unit. Bellows MLP MLP MLP MLP MLP J MLP J 220 lb 330 lb 220 lb 330 lb W x L to to to to 16.9 Lifting duration Lowering duration Usage Motor output (in seconds) (in seconds) Unloaded to loaded Unloaded to loaded frequency (W) 79 lb 93 lb Approx. 10 Approx times / hour 68 lb 70 w 77 lb 104 lb Approx. 10 Approx times / hour 86 lb *Bellows cannot be installed in a standard type.

5 Table type Mechanical-Electric Lift (Ball Screw, Electric type) MLI : 220 to 4409 lbs (2) Heavy Duty Type (1) This Series of lift tables are heavy-duty and could be used up to 100,000 cycles continuously. Major features of the MLI Series Low cost on par with hydraulic lifters Single-phase AC115 Three-phase AC220 Three-phase AC460 Has a maximum/minimum limit switch Can be used consecutively up to 100,000 cycles Note) When loading from the side of the table, please do so in the following manner: from side (1) load less than or equal to 1/2 of the load (see table), and from side (2) load less than or equal to 1/4 of the load (see table). Note) Do not carry out welding operations on top of the table. Electric Circuit Diagram:115V Specification Electric Circuit Diagram: 220V Specification Electric Circuit Diagram: 460V Specification

6 Lifting duration 60Hz (in second) Motor output (W) Note)*1: Turntable dimensions: W 43.3'' x H 43.3'' Note When loading from the side of the table, do so in the following manner: from side 1 load less thanor equal to 1/2 of the loading (see table), and from side 2 load less than or eqaul to 1/4 of the loading (see table). Note Not for use as a welding table. MLI W3A x to MLI WA x to MLI A x to MLI A x to MLI A x to MLI A x to MLI A x to MLI A x to MLI A x to MLI A x to MLI WA x to MLI A x to MLI A x to MLI A x to MLI A x to Bellows MLI JA x to (115V/Single phase) MLI JA x to MLI W x to MLI W x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to (220V/Three phase) MLI W x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI J x to Bellows MLI J x to (220V/Three phase) MLI J x to MLI J x to MLI x to MLI W x to MLI x to MLI x to (460V/Three phase) MLI x to MLI x to MLI x to MLI x to MLI x to MLI x to MLI J x to Bellows MLI J x to (460V/Three phase) MLI J x to MLI J x to Turn table MLI TN x 51.2 * to

7 Table type Mechanical-Electric Lift (Ball Screw, Electric Type) ML MLM HDV Ultra-low Platform Mini Type Mini Type Heavy Duty Type For DC 12V and DC 24V *HDV is only for DC 24V The AGV lift table works efficiently during the manufacturing process of the production line Major features Uses a brushless motor Vector control Dry ball screw cylinder Built-in unit Power supply: DC 12V / DC 24V Bellows type full cover (with 'J' at the end) Foot switch with LED Cord: 78.7in. Has a maximum/minimum limit switch Power cord: 118.1in. Note) Not for use as a welding table. HDV ML V MLM VJ Bellows Bellows ML V-D12 ML V-D24 ML VJ-D12 ML VJ-D24 MLM V-D12 MLM V-D24 MLM VJ-D12 MLM VJ-D24 Duration of Liffting and lowering (in seconds) Moter output (W) 330 lbs to lbs 330 lbs to lbs 551 lbs to lbs 551 lbs to lbs HDV lbs to lbs

8 Mini Lift Table Mechanical-Manuai Lift (Trapezoidal Screw, Manual Type) MH Trapezoidal Screw Manual Type : 220 to 661 lbs Smooth operation With loaded while Lowering and raising No-hydraulic drift Strong structurer by using trapezoidal screw. MH MH W MH MH W * Wrench included with all MH Lift Tables. MH W MH MH lbs(static)* (Dinamic)* 661 lbs 661 lbs ~ ~ ~14.3 Lift method Trapezoidal screw/ manual Number of rotation Approx.30 times Approx.40 times Approx.40 times 18 lbs 66 lbs 71 lbs * The load of MH W is 220 Ibs while it is lifting or lowering and 331 Ibs while it is stopping.

9 Push cart type Hydraulic/Foot operated type HLH : 264 to 2205 lbs The cart can be moved freely and can be elevated from a low position to a high position according to the work environment. It is a lifter with many applications and is only limited by your imagination. Also, based on the JIS standard, the lowering of the table is minimized to 2% or less strokes when left for 15 minutes with the maximum load weight. Major features of the HLH Series Hydraulic cylinder Swivel casters with brakes Foot pedal type Comes with an overloading prevention device *1 Has a springback mechanism in the release handle. In an emergency, lowering will stop as soon as you release the handle *2 Note) To raise the lift, tighten the release handle. Foot pedal for easy height adjustment HLH-400M Height can be adjusted to match the work line by just stepping on the pedal. This is very useful in improving work efficiency. Oil used Turbine oil: ISO VG22 Materials Pump : Urethane type resin spray painting Cylinder : Urethane type resin spray painting Main body : Baked melamine / Powder coating *1 The lift will not elevate when overloaded. *2 This is not attached to the HLH-100. Hydraulic circuit diagram Table Release handle Arm Push handle Cylinder Foot pedal Rigid caster Hydraulic pump Stopper High-pressure hose Chassis Swivel caster HLH-120

10 Push cart type HLH-400SW HLH-400SW During lowering Overall length (LL) Wheels Number of pedals steps HLH-100 HLH-120 HLH-150W HLH-200 HLH-300W HLH-400S HLH-400SW HLH-400M HLH-400L HLH-500MW HLH-700 HLH-1000M HLH-1000L 264 lbs 330 lbs 441 lbs 661 lbs 882 lbs 1103 lbs 1543 lbs 2205 lbs to to to to to to to to to to to to to φ5.9 rubber φ3.9 urethane φ5.1 rubber φ5.9 rubber φ5.9 rubber φ7.9 urethane φ5.9 urethane φ7.9 urethane Approx. 12 times Approx. 20 times Approx. 62 times Approx. 36 times Approx. 85 times Approx. 62 times Approx. 58 times Approx. 58 times Approx. 85 times Approx. 00 times Approx. 85 times Approx. 00 times Approx. 00 times 41.9 lbs 66.1 lbs 150 lbs 99 lbs lbs 154 lbs 176 lbs lbs 176 lbs lbs lbs * HLH-100's push handle can be folded.

11 Push cart type Hydraulic/foot operated type HLH : 110 to 176 lbs Light Type The improved aluminum pump and steel body are light enough to carry out. All HLH Light models come with foldable handle. Major features of the HLH Light Series Hydraulic cylinder Swivel casters with brakes Foot pedal for easy height adjustment Overloading prevention device Springback mechanism in the release handle The push handles can be folded. Major specifications Oil used Turbine oil: ISO VG22 HLH-80L HLH-50L HLH-50L HLH-60L HLH-80L 110 lbs 132 lbs 176 lbs Overall length (LL) Wheels φ3.0 rubber φ3.0 rubber φ3.0 rubber Number of Pump steps Approx. 6 times Approx. 7 times Approx. 14 times 30.9 lbs 48.5 lbs 63.9 lbs

12 Push carts Hydraulic/Foot operated type HLH Aluminum : 110 to 176 lbs This cart has been made lighter by using aluminum as product material. It is ideal for lifting/lowering and transporting heavy items on the go. It is also equipped with a handle to make it easier to carry around. Major features of the HLH Series Hydraulic cylinder Casters with brakes Foot pedal type Comes with an overloading prevention device *1 Major specifications HLH-A50 Oil used Materials Turbine oil: ISO VG22 Pump : Aluminum Cylinder : Aluminum Main body : Aluminum *1 The lifter will not elevate when overloaded. During lowering Can be easily carried onto your vehicle with loads. Overall length Wheels Number of pump steps Aluminum HLH-A50 HLH-A60 HLH-A lbs 132 lbs 176 lbs to to to Approx. 6 times Approx. 7 times Approx. 14 times 25.1 lbs 30.1 lbs 44.1 lbs

13 Push cart type Hydraulic/foot operated type HLH Bellows : 330 to 1103 lbs Bellows are attached to the HLH to create a safe work environment. Major features of the HLH Series Hydraulic cylinder Swivel casters with brakes (double stoppers, not available in HLH-150J) Foot pedal type Comes with an overloading prevention device *1 Complete bellows skirting Rapid pump (The pump mode switches from fast to standard when loaded 20% of.) *2 Has a springback mechanism in the release handle. In an emergency, lowering will stop as soon as you release the handle Option Rapid pump (reduces the number of pump steps) Major specifications HLH-100J Oil used Materials Turbine oil: ISO VG22 Bellows : Acrylic resin-coated polyester Pump : Urethane type resin spray painting Cylinder : Urethane type resin spray painting Main body : Baked melamine / Powder coating During lowering *1 The lifter will not elevate when overloaded. *2 Rapid pump is made available to limited models. See specifications. Table Release handle Arm Bellows Rigid caster Cylinder High-pressure hose Chassis Push handle Foot pedal Hydraulic pump Stopper Swivel caster Bellows HLH-150J HLH-250J HLH-500MJ 330 lbs 551 lbs 1103 lbs Overall length (LL) Wheels φ5.9 rubber Number of Pump steps fast / standard Approx. / 22 times Approx. /36 times Approx. 18 /42 times 99.2 lbs lbs 216 lbs

14 Push cart type Hydraulic/foot operated type HLH Stainless Steel : 330 to 1103 lbs The HLH Stainless steel lift cart is using SUS304. (The pump is aluminum and the piston is plated iron.) Stainless steel is resistant to water so it can be washed down for a sanitary work area. Major features of the HLH Series Hydraulic cylinder Swivel casters with brakes Foot pedal type Comes with an overloading prevention device *1 Major specifications Oil used Materials Turbine oil: ISO VG22 Pump : Aluminum Cylinder : SUS304 Main body : SUS304(The piston is plated iron) *1 The lifter will not elevate when overloaded. HLH-150SUS During lowering Overall length (LL) Wheels Number of pump steps Stainless HLH-150SUS HLH-250SUS HLH-500SUS 330 lbs 551 lbs 1103 lbs φ3.9 urethane φ3.9 urethane φ5.9 urethane lbs 99.2 lbs lbs

15 Push cart type Hydraulic/Foot operated type HLH Handle-less : 220 to 441 lbs With the handle removed from the standard type, this cart is ideal for loading long items. Major features of the HLH Series Hydraulic cylinder Swivel casters with brakes (double stopper for models other than HLH-100HL and HLH-120HL) Foot pedal type Comes with an overloading prevention device *1 Option Pump with a rapid traverse device Major specifications Oil used Materials Turbine oil: ISO VG22 Pump : Urethane type resin spray painting Cylinder : Urethane type resin spray painting Main body : Baked melamine / Powder coating *1 The lift will not elevate when overloaded. HLH-200HL Useful for carrying long loads such as panels and poles. [Handle-less type pump diagram] Release handle Foot pedal Overall length (LL) Wheels Number of pump steps Handle-less HLH-100HL HLH-120HL HLH-200HL 264 lbs 441 lbs to to to Approx. 12 times Approx. 22 times Approx. 36 times 41.9 lbs 66.2 lbs 99.2 lbs * This cart is also available with bellows (except HLH-100HL).

16 Push cart type Hydraulic/Foot operated type HLH Ultra-low Type : 220 to 882 lbs Available with incleased standard stroke. Equipped with easy movement wheels. Lift table lowers to 3.2 inches. Major features of the HLH Series Hydraulic cylinder Casters with brakes Foot pedal type Overloading prevention device Nose dive prevention valve (HLH L only) HLH L Push handle Release handle Pump pedal 2 urethane rigid casters 2 rubber swivel casters (with brakes on both wheels) During lowering Low Platform 441 lbs 882 lbs to to to 31.0 Total length (LL) Wheel dimensions Swivel casters Rigid caster with brakes φ3.0 φ3.0 φ3.0 φ3.9 φ4.9 φ5.9 Number of pump steps Approx. 20 times 77 lbs Approx. 46 times lbs Approx. 70 times lbs The swivel casters have rubber wheels and the rigid casters have urethane wheels. HLH L has rubber wheels.

17 Fork type Hydraulic/Foot operated type HLFN : to 2205 lbs By installing cylinders under the forks, we were able to eliminate the part of hydraulic unit from push handle area for more efficient work space. Major features of the HLFN Series Hydraulic cylinder Swivel casters with brakes Foot pedal type Comes with an overloading prevention device *1 Major specifications Oil used Turbine oil: ISO VG22 *1 The lift will not elevate when overloaded. L Overall height Fork width Overall width W Overall length HLFN-500F Overall length Overall width Overall height Fork dimensions W x L Fork width Fork height Wheels (Swivel caster / Rigid caster) Number of pump steps 1103 lbs to φ5.9 rubber / φ3.0 urethane Approx. 52 times lbs

18 Mast Type Hydraulic/step type HFH : 330 to 1323 lb HFH-H150-9 type which can work easily even in narrow gaps Useful in transporting pallets between narrow spaces and walkways. Major features of the HFH Manual Type Series Compact hydraulic step type lifter is easy to operate in narrow walkways. Low total height type is easy to operate in entrances and exits and in buildings with low ceilings. Swivel handling with creatively designed plated handles. The rigid casters have urethane wheels, and the swivel casters have rubber wheels with brakes on both sides. Strong and light-weight mast and fork design that uses high tensile strength steel. Comes with an overloading prevention valve. Fork width is easy to adjust. Mast with new structure that prevents fork vibration. Comes with a rapid traverse device (attached to the HFH-H150 or H200). Has a springback mechanism in the release handle. In an emergency, lowering will stop as soon as you release the handle. The pump pedal is designed to be easy to press. Release handle Lowering Spring Spring tension HFH-H200-9 The release handle returns by spring tension, so in an emergency, the fork will stop lowering as soon as you release the handle. Note) Close the release handle when raising the lift. HFH-H150-9 HFH-H HFH-H HFH-H200-9 HFH-H HFH-H HFH-H300-9 HFH-H HFH-H lb 441lb 661lb center distance (LC) Minimum height A Fork height Fork dimensions Leg dimensions Wheel dimensions External dimensions Number of pump steps Minimum Maximum Length Width Thickness Slide outside Height Internal External Rigid Swivel casters Total Total Total height *A height B C D E width F to G H width J width K caster with brakes length L width M height N No load Full load to to to The swivel casters have rubber wheels and the rigid casters have urethane wheels. * When the fork is placed on the legs the minimum height will be increased by about 0.4in lb 110lb 117lb 101lb 108lb 115lb 190lb 212lb 251lb

19 Mast Type HFH-H500-9 HFH-H Swivel casters Rigid casters HFH-H400-9 HFH-H HFH-H HFH-H500-9 HFH-H HFH-H HFH-H600-9 HFH-H HFH-H lb center distance (LC) 13.8 Minimum height A lb lb Fork height Fork dimensions Leg dimensions Wheel dimensions External dimensions Number of pump steps Minimum Maximum Length Width Thickness Slide outside Height Internal External Rigid Swivel casters Total Total Total height *A height B C D E width F to G H width J width K caster with brakes length L width M height N No load Full load to to to The swivel casters have rubber wheels and the rigid casters have urethane wheels. * When the fork is placed on the legs the minimum height will be increased by about 0.4in lb 209lb 249lb 247lb 269lb 291lb 243lb 265lb 287lb

20 Mast Type Mechanical Lift (Ball Screw, Electric Type) HFH : 441 lb Battery powered high-performance achieved at a low cost! This is one equipment necessary for transporting small articles. Major features of the HFH Mechanical Lift Series Uses IPM motor Clean operation without oil leaks due to the dry cylinder Does not fall by itself Maintenance free Battery-powered type that is very simple to operate With vector control for smooth operation Cylinder Inside unit box HFH-P Electric types comparison table Hydraulic type HFH-DXXX Ball screw type HFH-BXXX Speed Cost Swivel caster Rigid caster HFH-P200-9 HFH-P HFH-P center Fork height Fork dimensions Leg dimensions Wheel dimensions External dimensions Lifting duration Battery Motor loaded/ distance Minimum Minimum Maximum Length Width Thickness Slide outside Height Internal External Rigid Swivel Total Total Total casters with unloaded DC 12 V (LC) height A height *A height B C D E width F to G H width J width K caster brakes length L width M height N (in seconds) kw /21 168lb 441lb to /29 30A19L lb /37 181lb When the fork is placed on the legs the minimum height will be increased by about 0.4in.