Install and Configure Cyberoam iaccess for ios

Transcription

1 Applicable Cyberoam Version: onwards Applicable iaccess Client Version: onwards Applicable ios Version: 5.0 onwards. Compatible with iphone, ipad, and ipod touch. This app is optimized for iphone Overview Cyberoam's iaccess for ios is an application for iphone, ipod touch, and ipad that authenticates users with Cyberoam, integrated with local or external authentication servers.cyberoam iaccess features are enlisted below: - Client Authentication. (Supported by all CyberoamOS) - Access to the My Account portal which allows users to view personal details, manage user credentials. (Supported by all CyberoamOS) - Displays information on user s Internet usage policies and data usage. (Supported by all CyberoamOS) - Gives access to quarantined s facilitating self-management. (Not supported in 15i, 15iNG and 15wiNG) - Periodic Push Notifications to be sent to the ios device. For example the user will be promted to relogin prior to session expiry. (Supported versions GA onwards) 2. Scenario Install and configure Cyberoam iaccess on iphone. 3. Configuration To configure Client in iphone, follow the steps given below Step 1: Download and Install Client Download Client and install it in your mobile device. You can download the Client from:

2 - Apple itunes - From the App Store on the mobile device Step 2: Configure Client Start Client application. You will be briefed about the app, as shown below.

3

4

5 The login screen appears. Before logging in, you need to define settings for the Client. Click Settings to configure the client, as shown below.

6 Click against Gateway IP and specify the Cyberoam IP Address as your authentication gateway. You can obtain your Cyberoam IP Address from your Network Administrator. You can also set the following parameters. Parameter Value Description Auto Login Save Password Show Notification Disabled (Default) Enabled (Default) Enabled (Default) When enabled, user automatically logs in on application start. Disable if you do not want to login automatically. When enabled client saves your password. This option is automatically enabled if Auto Login is enabled. Disable if you do not want client to save your password. When enabled user receives periodic Push Notifications to. For example, the user will be promted to re-login prior to session expiry.

7 Tap Done to return to Login Screen. Note: The auto-discovery of Cyberoam Gateway IP will trigger once the installation is complete. For all future instances, manual intervention is required Step 3: Log into Client In the Login Screen, specify your credentials and tap Login to log into the client.

8

9 3.4. Step 4: Use Client iaccess is primarily used to authenticate network users to their gateway Cyberoam for seamless Internet access. Additionally, the client provides the following functionalities. Personal: Displays user s Cyberoam account information. It also lets a user update his/her details like ID, account password etc. Account Status: Displays current account status including Policy and Data usage information. Quarantine Mails: Displays Virus and Spam Quarantine s received by the user. Settings: View and edit configured settings of the Authentication Client. FAQs:This section contains Frequently Asked Questions which gives user more information about the client.

10 About us: Displays information about the client and the developer: Cyberoam Technologies Pvt. Ltd Step 5: Logout Click Logout on the upper right corner of each screen to logout from the client.