TWO HAND STATION JSTD25

Transcription

1 TWO HN STTION JST25 JST25 JST25 JST25 JST25E JST25 F or H JST25G, example of customizing JST25P1 shown with holder

2 TEKNT.O Technical data JST25 Manufacturer JOK SFETY, Sweden Ordering data JST25 JST25, with Estop JST25 with ball & socket mount JST25E, as, and with Estop JST25F, with 5pole connector JST25G (customized) JST25H, with 8pole connector JST25P1, with internal Eva. Material Safeball: Polypropen. Housing: JST25 ///E painted steel, JST25 F/G/H/P1 anodized aluminium. Gaskets: rubber. Size (Length x Width x Height) JST25 / JST25 /E JST25 F/H JST25 G JST25 P1 400 x 110 x 125 mm 400 x 110 x 156 mm 56 x 91 x 129 mm ustomized 15 x 70 x 160 mm Weight without cable olour Temperature Protection class onnection JST25 ///E JST25 F/H JST25 G JST25 P1, 4,0 kg 0,65 kg ustomized 0,85 kg lack and yellow. JST25 F/G/H also anodized aluminium (operation) (storage) IP65 JST25 ///E Screw clamp terminals inside JST25 F M12 5pole male contact JST25 G able or contact (customized) JST25 H M12 8pole male contact JST25 P1 8+1 pole Zylin male contact Twohand (Safeball) Emergency stop push button Operating force pprox. 2 N 40 N ctuator travel 1. ±0.6 mm 5 mm Mechanical life 1x10 6 operations x10 5 operations Max operating frequency 1 Hz 0, Hz Isolation voltage 1000 V rms 690 V rms Max switching load 0 V 2 resistive load 240 V Recommended load 24 V 10 m 24 V 20 m ontact resistance 100 mohm 20 mohm ontact type Spring loaded snapaction. 2 NO, 2 N. True Twochannel. irect opening, separated contact blocks. 2 N. Safety level (if used with corresponding safety unit from Jokab Safety) Type III acc. to EN574 (=highest level) at. 4 acc. to EN 9541 (=highest level) ccessories (see also product catalog) JSTS 1 JSM 7 JSM 14 M12101 M1210 JSTK40S JSTK80S Floor stand with ring for JST25 ///E Holder/shelf for JST25 F/G/H Holder/shelf for JST25P1 10m cable for JST25F 10m cable for JST25H 4m spiral cable for JST25P1 8m spiral cable for JST25P1 Standards EN 574, EN ISO 18491, EN ISO1850, EN , EN , EN 999, IE Specifications subject to changes without notice. ata as delivered. High wattage, high speed operating, high or low temperature, chemicals etc. will affect data.

3 For utton 22 (X) 54, For M10(4X) 22.5±0.5(2X) ,5 14, ±4 M5 (8X) Section showing provision for connection and earth screws. E TOLERNE UNLESS OTHER STTE: ±1MM F to any third party, nor be use for anyauthorized Subject to change without notice Material Ytbehandling imension Konstruerad av Granskad av Godkänd av atum Generell ytjämnhet purpose. OPYRIGHT JOK SFETY 2004 Ägare STEEL POWER PINTE M Titel/benämning Färg LK Ra TWOHN STTION Generell tolerans ±1 mm Vyplacering Format Skala Ritningsnummer Utgåva lad JST25 1:2.5 1/1

4 For utton 22 (X) 54, For M10(4X) ±0.5(2X) ,5 14, ±4 M5 (8X) 25 Section showing provision for connection and earth screws E TOLERNE UNLESS OTHER STTE: ±1MM F to any third party, nor be use for anyauthorized purpose. Subject to change without notice Material Ytbehandling imension STEEL Konstruerad av Ägare POWER PINTE Granskad av LK M Ra OPYRIGHT JOK SFETY 2004 Färg Godkänd av atum Generell ytjämnhet Titel/benämning TWOHN STTION Generell tolerans ±1 mm Vyplacering Format JST25E Skala Ritningsnummer Utgåva lad 1:2.5 1/1

5

6 ± ± M12, 5pole male 4 220± E F to any third party, nor be use for anyauthorized Material Ytbehandling imension Konstruerad av Granskad av Godkänd av atum Generell ytjämnhet Ägare purpose. OPYRIGHT JOK SFETY 2004 MR Titel/benämning Färg Generell tolerans ISO 2768 mk Vyplacering Format Skala Ritningsnummer Utgåva lad JST25F 1:1 1/2

7

8 ,5 ±0,5 U L E 1 State dim 2 State dim Type of connection 4 onnector side U or L 5 Type of Safeball 6 Other request F O NOT FORGET TO TTH ELETRIL IGRM TO REQUEST/ORER! to any third party, nor be use for anyauthorized purpose Material Ytbehandling imension Konstruerad av MR Granskad av Godkänd av atum Generell ytjämnhet Ägare OPYRIGHT JOK SFETY Titel/benämning Ritningsnummer Färg Generell tolerans ISO 2768 mk Vyplacering Format JST25G Utgåva Skala lad 1:1 1/1

9 ± ± M12, 8pole male 4 220± E F to any third party, nor be use for anyauthorized Material Ytbehandling imension Konstruerad av Granskad av Godkänd av atum Generell ytjämnhet Ägare MR purpose. OPYRIGHT JOK SFETY Titel/benämning Färg Generell tolerans TWO HN STTION Vyplacering Format Skala Ritningsnummer Utgåva lad JST25H ISO 2768 mk 1:1 1/2

10

11 POLE ONNETOR ,5 70 Material Ytbehandling imension l & PP Färg Generell tolerans ISO 2768 mk to any third party, nor be used for any unauthorized purpose. 1 2 Konstruerad av Granskad av Godkänd av Ägare MR XX OPYRIGHT JOK SFETY 2004 atum Generell ytjämhet Titel/enämning Ra 1, Ritningsnummer JST25P1 New Vyplacering Format 4 Utgåva 1 Skala lad 1:2 1/1

12 JOK SFETY

13 JSTK40S JSTK80S For JST25P JSM 7 Stainless steel For JST25 F/G/H 140 JSM 14 Polycarbonate For JST25P1 78 JSTK0 For JST25P1 Height mm JSTS1 Steel For JST25 ///E M12101 (5pole) M1210 (8pole) For JST25 F/G/H Smile 10EK Polypropene For JST25 F/G/H dam & Eva Macromelt For JST25 F/G/H 60 4x 11 to any third party, nor be used for any unauthorized JST25 ccessories 1 purpose.